| /Linux-v6.6/arch/arm64/boot/dts/exynos/ |
| D | exynos5433-tmu.dtsi | 19 hysteresis = <1000>; /* millicelsius */
24 hysteresis = <1000>; /* millicelsius */
29 hysteresis = <1000>; /* millicelsius */
34 hysteresis = <1000>; /* millicelsius */
39 hysteresis = <1000>; /* millicelsius */
44 hysteresis = <1000>; /* millicelsius */
49 hysteresis = <1000>; /* millicelsius */
107 hysteresis = <1000>; /* millicelsius */
112 hysteresis = <1000>; /* millicelsius */
117 hysteresis = <1000>; /* millicelsius */
[all …]
|
| D | exynos7-trip-points.dtsi | 12 hysteresis = <10000>; /* millicelsius */
17 hysteresis = <10000>; /* millicelsius */
22 hysteresis = <10000>; /* millicelsius */
27 hysteresis = <10000>; /* millicelsius */
32 hysteresis = <10000>; /* millicelsius */
37 hysteresis = <10000>; /* millicelsius */
42 hysteresis = <10000>; /* millicelsius */
47 hysteresis = <0>; /* millicelsius */
|
| /Linux-v6.6/drivers/gpu/drm/nouveau/nvkm/subdev/therm/ |
| D | temp.c | 32 therm->bios_sensor.thrs_fan_boost.hysteresis = 3; in nvkm_therm_temp_set_defaults()
35 therm->bios_sensor.thrs_down_clock.hysteresis = 3; in nvkm_therm_temp_set_defaults()
38 therm->bios_sensor.thrs_critical.hysteresis = 5; in nvkm_therm_temp_set_defaults()
41 therm->bios_sensor.thrs_shutdown.hysteresis = 5; /*not that it matters */ in nvkm_therm_temp_set_defaults()
50 s->thrs_fan_boost.hysteresis = max_t(u8, s->thrs_fan_boost.hysteresis, 2); in nvkm_therm_temp_safety_checks()
51 s->thrs_down_clock.hysteresis = max_t(u8, s->thrs_down_clock.hysteresis, 2); in nvkm_therm_temp_safety_checks()
52 s->thrs_critical.hysteresis = max_t(u8, s->thrs_critical.hysteresis, 2); in nvkm_therm_temp_safety_checks()
53 s->thrs_shutdown.hysteresis = max_t(u8, s->thrs_shutdown.hysteresis, 2); in nvkm_therm_temp_safety_checks()
150 } else if (temp <= thrs->temp - thrs->hysteresis && in nvkm_therm_threshold_hyst_polling()
200 sensor->thrs_fan_boost.hysteresis, in nvkm_therm_program_alarms_polling()
[all …]
|
| D | g84.c | 67 nvkm_wr32(device, 0x20484, sensor->thrs_shutdown.hysteresis); in g84_therm_program_alarms()
83 sensor->thrs_fan_boost.hysteresis, in g84_therm_program_alarms()
85 sensor->thrs_down_clock.hysteresis, in g84_therm_program_alarms()
87 sensor->thrs_critical.hysteresis, in g84_therm_program_alarms()
89 sensor->thrs_shutdown.hysteresis); in g84_therm_program_alarms()
110 nvkm_wr32(device, thrs_reg, thrs->temp - thrs->hysteresis); in g84_therm_threshold_hyst_emulation()
122 cur < thrs->temp - thrs->hysteresis) in g84_therm_threshold_hyst_emulation()
|
| /Linux-v6.6/arch/arm/boot/dts/samsung/ |
| D | exynos5422-odroidxu3-common.dtsi | 63 hysteresis = <5000>; /* millicelsius */
68 hysteresis = <5000>; /* millicelsius */
73 hysteresis = <5000>; /* millicelsius */
78 hysteresis = <0>; /* millicelsius */
89 hysteresis = <10000>; /* millicelsius */
94 hysteresis = <10000>; /* millicelsius */
152 hysteresis = <5000>;
157 hysteresis = <5000>;
162 hysteresis = <5000>;
167 hysteresis = <0>;
[all …]
|
| D | exynos5422-odroidhc1.dts | 38 hysteresis = <10000>; /* millicelsius */
43 hysteresis = <10000>; /* millicelsius */
48 hysteresis = <0>; /* millicelsius */
93 hysteresis = <10000>;
98 hysteresis = <10000>;
103 hysteresis = <0>;
137 hysteresis = <10000>;
142 hysteresis = <10000>;
147 hysteresis = <0>;
181 hysteresis = <10000>;
[all …]
|
| D | exynos5420-trip-points.dtsi | 13 hysteresis = <10000>; /* millicelsius */
18 hysteresis = <10000>; /* millicelsius */
23 hysteresis = <10000>; /* millicelsius */
28 hysteresis = <0>; /* millicelsius */
|
| D | exynos4-cpu-thermal.dtsi | 19 hysteresis = <10000>; /* millicelsius */
24 hysteresis = <10000>; /* millicelsius */
29 hysteresis = <10000>; /* millicelsius */
34 hysteresis = <0>; /* millicelsius */
|
| /Linux-v6.6/Documentation/hwmon/ |
| D | lm77.rst | 28 critical (temp1_crit.) It also implements an hysteresis mechanism which
31 the limit and its hysteresis is always the same for all 3 limits.
35 * When setting a limit, its hysteresis will automatically follow, the
37 was 80 degrees C, and the hysteresis was 75 degrees C, and you change
38 the critical limit to 90 degrees C, then the hysteresis will
40 * All 3 hysteresis can't be set independently. We decided to make
44 hysteresis applies automatically to the low and high limits.
45 * The limits should be set before the hysteresis.
|
| D | emc1403.rst | 63 hysteresis mechanism which applies to all limits. The relative difference
65 difference between the limit and its hysteresis is always the same for
70 * When setting a limit, its hysteresis will automatically follow, the
72 was 80 degrees C, and the hysteresis was 75 degrees C, and you change
73 the critical limit to 90 degrees C, then the hysteresis will
75 * The hysteresis values can't be set independently. We decided to make
76 only temp1_crit_hyst writable, while all other hysteresis attributes
79 hysteresis applies automatically to all other limits.
80 * The limits should be set before the hysteresis.
|
| /Linux-v6.6/arch/arm64/boot/dts/ti/ |
| D | k3-j721s2-thermal.dtsi | 13 hysteresis = <2000>; /* milliCelsius */
27 hysteresis = <2000>; /* milliCelsius */
41 hysteresis = <2000>; /* milliCelsius */
55 hysteresis = <2000>; /* milliCelsius */
69 hysteresis = <2000>; /* milliCelsius */
83 hysteresis = <2000>; /* milliCelsius */
97 hysteresis = <2000>; /* milliCelsius */
|
| D | k3-j784s4-thermal.dtsi | 13 hysteresis = <2000>; /* milliCelsius */
27 hysteresis = <2000>; /* milliCelsius */
41 hysteresis = <2000>; /* milliCelsius */
55 hysteresis = <2000>; /* milliCelsius */
69 hysteresis = <2000>; /* milliCelsius */
83 hysteresis = <2000>; /* milliCelsius */
97 hysteresis = <2000>; /* milliCelsius */
|
| D | k3-j721e-thermal.dtsi | 14 hysteresis = <2000>; /* milliCelsius */
28 hysteresis = <2000>; /* milliCelsius */
42 hysteresis = <2000>; /* milliCelsius */
56 hysteresis = <2000>; /* milliCelsius */
70 hysteresis = <2000>; /* milliCelsius */
|
| D | k3-am654-industrial-thermal.dtsi | 13 hysteresis = <2000>; /* milliCelsius */
27 hysteresis = <2000>; /* milliCelsius */
41 hysteresis = <2000>; /* milliCelsius */
|
| /Linux-v6.6/arch/arm64/boot/dts/qcom/ |
| D | sm6375.dtsi | 1776 hysteresis = <2000>;
1782 hysteresis = <2000>;
1788 hysteresis = <1000>;
1803 hysteresis = <2000>;
1809 hysteresis = <2000>;
1815 hysteresis = <1000>;
1830 hysteresis = <2000>;
1836 hysteresis = <2000>;
1842 hysteresis = <1000>;
1857 hysteresis = <2000>;
[all …]
|
| D | pm8550vs.dtsi | 20 hysteresis = <0>;
26 hysteresis = <0>;
41 hysteresis = <0>;
47 hysteresis = <0>;
62 hysteresis = <0>;
68 hysteresis = <0>;
83 hysteresis = <0>;
89 hysteresis = <0>;
|
| D | sa8775p-pmics.dtsi | 19 hysteresis = <0>;
25 hysteresis = <0>;
39 hysteresis = <0>;
45 hysteresis = <0>;
59 hysteresis = <0>;
65 hysteresis = <0>;
79 hysteresis = <0>;
85 hysteresis = <0>;
|
| D | sm8550.dtsi | 4207 hysteresis = <1000>;
4213 hysteresis = <5000>;
4227 hysteresis = <1000>;
4233 hysteresis = <5000>;
4247 hysteresis = <1000>;
4253 hysteresis = <5000>;
4267 hysteresis = <1000>;
4273 hysteresis = <5000>;
4287 hysteresis = <1000>;
4293 hysteresis = <5000>;
[all …]
|
| D | pm8010.dtsi | 20 hysteresis = <0>;
26 hysteresis = <0>;
41 hysteresis = <0>;
47 hysteresis = <0>;
|
| D | pmr735d.dtsi | 20 hysteresis = <0>;
26 hysteresis = <0>;
41 hysteresis = <0>;
47 hysteresis = <0>;
|
| /Linux-v6.6/drivers/platform/x86/ |
| D | gpd-pocket-fan.c | 35 static int hysteresis = HYSTERESIS_DEFAULT; variable
36 module_param(hysteresis, int, 0444);
37 MODULE_PARM_DESC(hysteresis,
102 if (temp <= (temp_limits[i] - hysteresis)) in gpd_pocket_fan_worker()
140 if (hysteresis < 1000 || hysteresis > 10000) { in gpd_pocket_fan_probe()
142 hysteresis); in gpd_pocket_fan_probe()
143 hysteresis = HYSTERESIS_DEFAULT; in gpd_pocket_fan_probe()
|
| /Linux-v6.6/drivers/thermal/ |
| D | thermal_trip.c | 72 trip_low = trip.temperature - trip.hysteresis; in __thermal_zone_set_trips()
147 if (t.hysteresis != trip->hysteresis && tz->ops->set_trip_hyst) { in thermal_zone_set_trip()
148 ret = tz->ops->set_trip_hyst(tz, trip_id, trip->hysteresis); in thermal_zone_set_trip()
153 if (tz->trips && (t.temperature != trip->temperature || t.hysteresis != trip->hysteresis)) in thermal_zone_set_trip()
157 trip->temperature, trip->hysteresis); in thermal_zone_set_trip()
|
| /Linux-v6.6/Documentation/devicetree/bindings/thermal/ |
| D | brcm,sr-thermal.txt | 40 hysteresis = <0>;
52 hysteresis = <0>;
64 hysteresis = <0>;
76 hysteresis = <0>;
88 hysteresis = <0>;
100 hysteresis = <0>;
|
| /Linux-v6.6/arch/arm/boot/dts/rockchip/ |
| D | rk3288-veyron-mickey.dts | 48 hysteresis = <2000>; /* millicelsius */
53 hysteresis = <2000>; /* millicelsius */
58 hysteresis = <2000>; /* millicelsius */
63 hysteresis = <2000>; /* millicelsius */
68 hysteresis = <2000>; /* millicelsius */
73 hysteresis = <2000>; /* millicelsius */
78 hysteresis = <2000>; /* millicelsius */
154 hysteresis = <2000>; /* millicelsius */
159 hysteresis = <2000>; /* millicelsius */
164 hysteresis = <2000>; /* millicelsius */
[all …]
|
| /Linux-v6.6/drivers/gpu/drm/nouveau/nvkm/subdev/bios/ |
| D | therm.c | 103 sensor->thrs_critical.hysteresis = value & 0xf; in nvbios_therm_sensor_parse()
110 sensor->thrs_down_clock.hysteresis = value & 0xf; in nvbios_therm_sensor_parse()
117 sensor->thrs_fan_boost.hysteresis = value & 0xf; in nvbios_therm_sensor_parse()
143 sensor->thrs_shutdown.hysteresis = value & 0xf; in nvbios_therm_sensor_parse()
178 cur_trip->hysteresis = value & 0xf; in nvbios_therm_fan_parse()
|
