1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * linux/arch/arm/common/sa1111.c
4 *
5 * SA1111 support
6 *
7 * Original code by John Dorsey
8 *
9 * This file contains all generic SA1111 support.
10 *
11 * All initialization functions provided here are intended to be called
12 * from machine specific code with proper arguments when required.
13 */
14 #include <linux/module.h>
15 #include <linux/gpio/driver.h>
16 #include <linux/init.h>
17 #include <linux/irq.h>
18 #include <linux/kernel.h>
19 #include <linux/delay.h>
20 #include <linux/errno.h>
21 #include <linux/ioport.h>
22 #include <linux/platform_device.h>
23 #include <linux/slab.h>
24 #include <linux/spinlock.h>
25 #include <linux/dma-map-ops.h>
26 #include <linux/clk.h>
27 #include <linux/io.h>
28
29 #include <asm/mach/irq.h>
30 #include <asm/mach-types.h>
31 #include <linux/sizes.h>
32
33 #include <asm/hardware/sa1111.h>
34
35 #ifdef CONFIG_ARCH_SA1100
36 #include <mach/hardware.h>
37 #endif
38
39 /* SA1111 IRQs */
40 #define IRQ_GPAIN0 (0)
41 #define IRQ_GPAIN1 (1)
42 #define IRQ_GPAIN2 (2)
43 #define IRQ_GPAIN3 (3)
44 #define IRQ_GPBIN0 (4)
45 #define IRQ_GPBIN1 (5)
46 #define IRQ_GPBIN2 (6)
47 #define IRQ_GPBIN3 (7)
48 #define IRQ_GPBIN4 (8)
49 #define IRQ_GPBIN5 (9)
50 #define IRQ_GPCIN0 (10)
51 #define IRQ_GPCIN1 (11)
52 #define IRQ_GPCIN2 (12)
53 #define IRQ_GPCIN3 (13)
54 #define IRQ_GPCIN4 (14)
55 #define IRQ_GPCIN5 (15)
56 #define IRQ_GPCIN6 (16)
57 #define IRQ_GPCIN7 (17)
58 #define IRQ_MSTXINT (18)
59 #define IRQ_MSRXINT (19)
60 #define IRQ_MSSTOPERRINT (20)
61 #define IRQ_TPTXINT (21)
62 #define IRQ_TPRXINT (22)
63 #define IRQ_TPSTOPERRINT (23)
64 #define SSPXMTINT (24)
65 #define SSPRCVINT (25)
66 #define SSPROR (26)
67 #define AUDXMTDMADONEA (32)
68 #define AUDRCVDMADONEA (33)
69 #define AUDXMTDMADONEB (34)
70 #define AUDRCVDMADONEB (35)
71 #define AUDTFSR (36)
72 #define AUDRFSR (37)
73 #define AUDTUR (38)
74 #define AUDROR (39)
75 #define AUDDTS (40)
76 #define AUDRDD (41)
77 #define AUDSTO (42)
78 #define IRQ_USBPWR (43)
79 #define IRQ_HCIM (44)
80 #define IRQ_HCIBUFFACC (45)
81 #define IRQ_HCIRMTWKP (46)
82 #define IRQ_NHCIMFCIR (47)
83 #define IRQ_USB_PORT_RESUME (48)
84 #define IRQ_S0_READY_NINT (49)
85 #define IRQ_S1_READY_NINT (50)
86 #define IRQ_S0_CD_VALID (51)
87 #define IRQ_S1_CD_VALID (52)
88 #define IRQ_S0_BVD1_STSCHG (53)
89 #define IRQ_S1_BVD1_STSCHG (54)
90 #define SA1111_IRQ_NR (55)
91
92 extern void sa1110_mb_enable(void);
93 extern void sa1110_mb_disable(void);
94
95 /*
96 * We keep the following data for the overall SA1111. Note that the
97 * struct device and struct resource are "fake"; they should be supplied
98 * by the bus above us. However, in the interests of getting all SA1111
99 * drivers converted over to the device model, we provide this as an
100 * anchor point for all the other drivers.
101 */
102 struct sa1111 {
103 struct device *dev;
104 struct clk *clk;
105 unsigned long phys;
106 int irq;
107 int irq_base; /* base for cascaded on-chip IRQs */
108 spinlock_t lock;
109 void __iomem *base;
110 struct sa1111_platform_data *pdata;
111 struct irq_domain *irqdomain;
112 struct gpio_chip gc;
113 #ifdef CONFIG_PM
114 void *saved_state;
115 #endif
116 };
117
118 /*
119 * We _really_ need to eliminate this. Its only users
120 * are the PWM and DMA checking code.
121 */
122 static struct sa1111 *g_sa1111;
123
124 struct sa1111_dev_info {
125 unsigned long offset;
126 unsigned long skpcr_mask;
127 bool dma;
128 unsigned int devid;
129 unsigned int hwirq[6];
130 };
131
132 static struct sa1111_dev_info sa1111_devices[] = {
133 {
134 .offset = SA1111_USB,
135 .skpcr_mask = SKPCR_UCLKEN,
136 .dma = true,
137 .devid = SA1111_DEVID_USB,
138 .hwirq = {
139 IRQ_USBPWR,
140 IRQ_HCIM,
141 IRQ_HCIBUFFACC,
142 IRQ_HCIRMTWKP,
143 IRQ_NHCIMFCIR,
144 IRQ_USB_PORT_RESUME
145 },
146 },
147 {
148 .offset = 0x0600,
149 .skpcr_mask = SKPCR_I2SCLKEN | SKPCR_L3CLKEN,
150 .dma = true,
151 .devid = SA1111_DEVID_SAC,
152 .hwirq = {
153 AUDXMTDMADONEA,
154 AUDXMTDMADONEB,
155 AUDRCVDMADONEA,
156 AUDRCVDMADONEB
157 },
158 },
159 {
160 .offset = 0x0800,
161 .skpcr_mask = SKPCR_SCLKEN,
162 .devid = SA1111_DEVID_SSP,
163 },
164 {
165 .offset = SA1111_KBD,
166 .skpcr_mask = SKPCR_PTCLKEN,
167 .devid = SA1111_DEVID_PS2_KBD,
168 .hwirq = {
169 IRQ_TPRXINT,
170 IRQ_TPTXINT
171 },
172 },
173 {
174 .offset = SA1111_MSE,
175 .skpcr_mask = SKPCR_PMCLKEN,
176 .devid = SA1111_DEVID_PS2_MSE,
177 .hwirq = {
178 IRQ_MSRXINT,
179 IRQ_MSTXINT
180 },
181 },
182 {
183 .offset = 0x1800,
184 .skpcr_mask = 0,
185 .devid = SA1111_DEVID_PCMCIA,
186 .hwirq = {
187 IRQ_S0_READY_NINT,
188 IRQ_S0_CD_VALID,
189 IRQ_S0_BVD1_STSCHG,
190 IRQ_S1_READY_NINT,
191 IRQ_S1_CD_VALID,
192 IRQ_S1_BVD1_STSCHG,
193 },
194 },
195 };
196
sa1111_map_irq(struct sa1111 * sachip,irq_hw_number_t hwirq)197 static int sa1111_map_irq(struct sa1111 *sachip, irq_hw_number_t hwirq)
198 {
199 return irq_create_mapping(sachip->irqdomain, hwirq);
200 }
201
202 /*
203 * SA1111 interrupt support. Since clearing an IRQ while there are
204 * active IRQs causes the interrupt output to pulse, the upper levels
205 * will call us again if there are more interrupts to process.
206 */
sa1111_irq_handler(struct irq_desc * desc)207 static void sa1111_irq_handler(struct irq_desc *desc)
208 {
209 unsigned int stat0, stat1, i;
210 struct sa1111 *sachip = irq_desc_get_handler_data(desc);
211 struct irq_domain *irqdomain;
212 void __iomem *mapbase = sachip->base + SA1111_INTC;
213
214 stat0 = readl_relaxed(mapbase + SA1111_INTSTATCLR0);
215 stat1 = readl_relaxed(mapbase + SA1111_INTSTATCLR1);
216
217 writel_relaxed(stat0, mapbase + SA1111_INTSTATCLR0);
218
219 desc->irq_data.chip->irq_ack(&desc->irq_data);
220
221 writel_relaxed(stat1, mapbase + SA1111_INTSTATCLR1);
222
223 if (stat0 == 0 && stat1 == 0) {
224 do_bad_IRQ(desc);
225 return;
226 }
227
228 irqdomain = sachip->irqdomain;
229
230 for (i = 0; stat0; i++, stat0 >>= 1)
231 if (stat0 & 1)
232 generic_handle_domain_irq(irqdomain, i);
233
234 for (i = 32; stat1; i++, stat1 >>= 1)
235 if (stat1 & 1)
236 generic_handle_domain_irq(irqdomain, i);
237
238 /* For level-based interrupts */
239 desc->irq_data.chip->irq_unmask(&desc->irq_data);
240 }
241
sa1111_irqmask(struct irq_data * d)242 static u32 sa1111_irqmask(struct irq_data *d)
243 {
244 return BIT(irqd_to_hwirq(d) & 31);
245 }
246
sa1111_irqbank(struct irq_data * d)247 static int sa1111_irqbank(struct irq_data *d)
248 {
249 return (irqd_to_hwirq(d) / 32) * 4;
250 }
251
sa1111_ack_irq(struct irq_data * d)252 static void sa1111_ack_irq(struct irq_data *d)
253 {
254 }
255
sa1111_mask_irq(struct irq_data * d)256 static void sa1111_mask_irq(struct irq_data *d)
257 {
258 struct sa1111 *sachip = irq_data_get_irq_chip_data(d);
259 void __iomem *mapbase = sachip->base + SA1111_INTC + sa1111_irqbank(d);
260 u32 ie;
261
262 ie = readl_relaxed(mapbase + SA1111_INTEN0);
263 ie &= ~sa1111_irqmask(d);
264 writel(ie, mapbase + SA1111_INTEN0);
265 }
266
sa1111_unmask_irq(struct irq_data * d)267 static void sa1111_unmask_irq(struct irq_data *d)
268 {
269 struct sa1111 *sachip = irq_data_get_irq_chip_data(d);
270 void __iomem *mapbase = sachip->base + SA1111_INTC + sa1111_irqbank(d);
271 u32 ie;
272
273 ie = readl_relaxed(mapbase + SA1111_INTEN0);
274 ie |= sa1111_irqmask(d);
275 writel_relaxed(ie, mapbase + SA1111_INTEN0);
276 }
277
278 /*
279 * Attempt to re-trigger the interrupt. The SA1111 contains a register
280 * (INTSET) which claims to do this. However, in practice no amount of
281 * manipulation of INTEN and INTSET guarantees that the interrupt will
282 * be triggered. In fact, its very difficult, if not impossible to get
283 * INTSET to re-trigger the interrupt.
284 */
sa1111_retrigger_irq(struct irq_data * d)285 static int sa1111_retrigger_irq(struct irq_data *d)
286 {
287 struct sa1111 *sachip = irq_data_get_irq_chip_data(d);
288 void __iomem *mapbase = sachip->base + SA1111_INTC + sa1111_irqbank(d);
289 u32 ip, mask = sa1111_irqmask(d);
290 int i;
291
292 ip = readl_relaxed(mapbase + SA1111_INTPOL0);
293 for (i = 0; i < 8; i++) {
294 writel_relaxed(ip ^ mask, mapbase + SA1111_INTPOL0);
295 writel_relaxed(ip, mapbase + SA1111_INTPOL0);
296 if (readl_relaxed(mapbase + SA1111_INTSTATCLR0) & mask)
297 break;
298 }
299
300 if (i == 8) {
301 pr_err("Danger Will Robinson: failed to re-trigger IRQ%d\n",
302 d->irq);
303 return 0;
304 }
305
306 return 1;
307 }
308
sa1111_type_irq(struct irq_data * d,unsigned int flags)309 static int sa1111_type_irq(struct irq_data *d, unsigned int flags)
310 {
311 struct sa1111 *sachip = irq_data_get_irq_chip_data(d);
312 void __iomem *mapbase = sachip->base + SA1111_INTC + sa1111_irqbank(d);
313 u32 ip, mask = sa1111_irqmask(d);
314
315 if (flags == IRQ_TYPE_PROBE)
316 return 0;
317
318 if ((!(flags & IRQ_TYPE_EDGE_RISING) ^ !(flags & IRQ_TYPE_EDGE_FALLING)) == 0)
319 return -EINVAL;
320
321 ip = readl_relaxed(mapbase + SA1111_INTPOL0);
322 if (flags & IRQ_TYPE_EDGE_RISING)
323 ip &= ~mask;
324 else
325 ip |= mask;
326 writel_relaxed(ip, mapbase + SA1111_INTPOL0);
327 writel_relaxed(ip, mapbase + SA1111_WAKEPOL0);
328
329 return 0;
330 }
331
sa1111_wake_irq(struct irq_data * d,unsigned int on)332 static int sa1111_wake_irq(struct irq_data *d, unsigned int on)
333 {
334 struct sa1111 *sachip = irq_data_get_irq_chip_data(d);
335 void __iomem *mapbase = sachip->base + SA1111_INTC + sa1111_irqbank(d);
336 u32 we, mask = sa1111_irqmask(d);
337
338 we = readl_relaxed(mapbase + SA1111_WAKEEN0);
339 if (on)
340 we |= mask;
341 else
342 we &= ~mask;
343 writel_relaxed(we, mapbase + SA1111_WAKEEN0);
344
345 return 0;
346 }
347
348 static struct irq_chip sa1111_irq_chip = {
349 .name = "SA1111",
350 .irq_ack = sa1111_ack_irq,
351 .irq_mask = sa1111_mask_irq,
352 .irq_unmask = sa1111_unmask_irq,
353 .irq_retrigger = sa1111_retrigger_irq,
354 .irq_set_type = sa1111_type_irq,
355 .irq_set_wake = sa1111_wake_irq,
356 };
357
sa1111_irqdomain_map(struct irq_domain * d,unsigned int irq,irq_hw_number_t hwirq)358 static int sa1111_irqdomain_map(struct irq_domain *d, unsigned int irq,
359 irq_hw_number_t hwirq)
360 {
361 struct sa1111 *sachip = d->host_data;
362
363 /* Disallow unavailable interrupts */
364 if (hwirq > SSPROR && hwirq < AUDXMTDMADONEA)
365 return -EINVAL;
366
367 irq_set_chip_data(irq, sachip);
368 irq_set_chip_and_handler(irq, &sa1111_irq_chip, handle_edge_irq);
369 irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE);
370
371 return 0;
372 }
373
374 static const struct irq_domain_ops sa1111_irqdomain_ops = {
375 .map = sa1111_irqdomain_map,
376 .xlate = irq_domain_xlate_twocell,
377 };
378
sa1111_setup_irq(struct sa1111 * sachip,unsigned irq_base)379 static int sa1111_setup_irq(struct sa1111 *sachip, unsigned irq_base)
380 {
381 void __iomem *irqbase = sachip->base + SA1111_INTC;
382 int ret;
383
384 /*
385 * We're guaranteed that this region hasn't been taken.
386 */
387 request_mem_region(sachip->phys + SA1111_INTC, 512, "irq");
388
389 ret = irq_alloc_descs(-1, irq_base, SA1111_IRQ_NR, -1);
390 if (ret <= 0) {
391 dev_err(sachip->dev, "unable to allocate %u irqs: %d\n",
392 SA1111_IRQ_NR, ret);
393 if (ret == 0)
394 ret = -EINVAL;
395 return ret;
396 }
397
398 sachip->irq_base = ret;
399
400 /* disable all IRQs */
401 writel_relaxed(0, irqbase + SA1111_INTEN0);
402 writel_relaxed(0, irqbase + SA1111_INTEN1);
403 writel_relaxed(0, irqbase + SA1111_WAKEEN0);
404 writel_relaxed(0, irqbase + SA1111_WAKEEN1);
405
406 /*
407 * detect on rising edge. Note: Feb 2001 Errata for SA1111
408 * specifies that S0ReadyInt and S1ReadyInt should be '1'.
409 */
410 writel_relaxed(0, irqbase + SA1111_INTPOL0);
411 writel_relaxed(BIT(IRQ_S0_READY_NINT & 31) |
412 BIT(IRQ_S1_READY_NINT & 31),
413 irqbase + SA1111_INTPOL1);
414
415 /* clear all IRQs */
416 writel_relaxed(~0, irqbase + SA1111_INTSTATCLR0);
417 writel_relaxed(~0, irqbase + SA1111_INTSTATCLR1);
418
419 sachip->irqdomain = irq_domain_add_linear(NULL, SA1111_IRQ_NR,
420 &sa1111_irqdomain_ops,
421 sachip);
422 if (!sachip->irqdomain) {
423 irq_free_descs(sachip->irq_base, SA1111_IRQ_NR);
424 return -ENOMEM;
425 }
426
427 irq_domain_associate_many(sachip->irqdomain,
428 sachip->irq_base + IRQ_GPAIN0,
429 IRQ_GPAIN0, SSPROR + 1 - IRQ_GPAIN0);
430 irq_domain_associate_many(sachip->irqdomain,
431 sachip->irq_base + AUDXMTDMADONEA,
432 AUDXMTDMADONEA,
433 IRQ_S1_BVD1_STSCHG + 1 - AUDXMTDMADONEA);
434
435 /*
436 * Register SA1111 interrupt
437 */
438 irq_set_irq_type(sachip->irq, IRQ_TYPE_EDGE_RISING);
439 irq_set_chained_handler_and_data(sachip->irq, sa1111_irq_handler,
440 sachip);
441
442 dev_info(sachip->dev, "Providing IRQ%u-%u\n",
443 sachip->irq_base, sachip->irq_base + SA1111_IRQ_NR - 1);
444
445 return 0;
446 }
447
sa1111_remove_irq(struct sa1111 * sachip)448 static void sa1111_remove_irq(struct sa1111 *sachip)
449 {
450 struct irq_domain *domain = sachip->irqdomain;
451 void __iomem *irqbase = sachip->base + SA1111_INTC;
452 int i;
453
454 /* disable all IRQs */
455 writel_relaxed(0, irqbase + SA1111_INTEN0);
456 writel_relaxed(0, irqbase + SA1111_INTEN1);
457 writel_relaxed(0, irqbase + SA1111_WAKEEN0);
458 writel_relaxed(0, irqbase + SA1111_WAKEEN1);
459
460 irq_set_chained_handler_and_data(sachip->irq, NULL, NULL);
461 for (i = 0; i < SA1111_IRQ_NR; i++)
462 irq_dispose_mapping(irq_find_mapping(domain, i));
463 irq_domain_remove(domain);
464
465 release_mem_region(sachip->phys + SA1111_INTC, 512);
466 }
467
468 enum {
469 SA1111_GPIO_PXDDR = (SA1111_GPIO_PADDR - SA1111_GPIO_PADDR),
470 SA1111_GPIO_PXDRR = (SA1111_GPIO_PADRR - SA1111_GPIO_PADDR),
471 SA1111_GPIO_PXDWR = (SA1111_GPIO_PADWR - SA1111_GPIO_PADDR),
472 SA1111_GPIO_PXSDR = (SA1111_GPIO_PASDR - SA1111_GPIO_PADDR),
473 SA1111_GPIO_PXSSR = (SA1111_GPIO_PASSR - SA1111_GPIO_PADDR),
474 };
475
gc_to_sa1111(struct gpio_chip * gc)476 static struct sa1111 *gc_to_sa1111(struct gpio_chip *gc)
477 {
478 return container_of(gc, struct sa1111, gc);
479 }
480
sa1111_gpio_map_reg(struct sa1111 * sachip,unsigned offset)481 static void __iomem *sa1111_gpio_map_reg(struct sa1111 *sachip, unsigned offset)
482 {
483 void __iomem *reg = sachip->base + SA1111_GPIO;
484
485 if (offset < 4)
486 return reg + SA1111_GPIO_PADDR;
487 if (offset < 10)
488 return reg + SA1111_GPIO_PBDDR;
489 if (offset < 18)
490 return reg + SA1111_GPIO_PCDDR;
491 return NULL;
492 }
493
sa1111_gpio_map_bit(unsigned offset)494 static u32 sa1111_gpio_map_bit(unsigned offset)
495 {
496 if (offset < 4)
497 return BIT(offset);
498 if (offset < 10)
499 return BIT(offset - 4);
500 if (offset < 18)
501 return BIT(offset - 10);
502 return 0;
503 }
504
sa1111_gpio_modify(void __iomem * reg,u32 mask,u32 set)505 static void sa1111_gpio_modify(void __iomem *reg, u32 mask, u32 set)
506 {
507 u32 val;
508
509 val = readl_relaxed(reg);
510 val &= ~mask;
511 val |= mask & set;
512 writel_relaxed(val, reg);
513 }
514
sa1111_gpio_get_direction(struct gpio_chip * gc,unsigned offset)515 static int sa1111_gpio_get_direction(struct gpio_chip *gc, unsigned offset)
516 {
517 struct sa1111 *sachip = gc_to_sa1111(gc);
518 void __iomem *reg = sa1111_gpio_map_reg(sachip, offset);
519 u32 mask = sa1111_gpio_map_bit(offset);
520
521 return !!(readl_relaxed(reg + SA1111_GPIO_PXDDR) & mask);
522 }
523
sa1111_gpio_direction_input(struct gpio_chip * gc,unsigned offset)524 static int sa1111_gpio_direction_input(struct gpio_chip *gc, unsigned offset)
525 {
526 struct sa1111 *sachip = gc_to_sa1111(gc);
527 unsigned long flags;
528 void __iomem *reg = sa1111_gpio_map_reg(sachip, offset);
529 u32 mask = sa1111_gpio_map_bit(offset);
530
531 spin_lock_irqsave(&sachip->lock, flags);
532 sa1111_gpio_modify(reg + SA1111_GPIO_PXDDR, mask, mask);
533 sa1111_gpio_modify(reg + SA1111_GPIO_PXSDR, mask, mask);
534 spin_unlock_irqrestore(&sachip->lock, flags);
535
536 return 0;
537 }
538
sa1111_gpio_direction_output(struct gpio_chip * gc,unsigned offset,int value)539 static int sa1111_gpio_direction_output(struct gpio_chip *gc, unsigned offset,
540 int value)
541 {
542 struct sa1111 *sachip = gc_to_sa1111(gc);
543 unsigned long flags;
544 void __iomem *reg = sa1111_gpio_map_reg(sachip, offset);
545 u32 mask = sa1111_gpio_map_bit(offset);
546
547 spin_lock_irqsave(&sachip->lock, flags);
548 sa1111_gpio_modify(reg + SA1111_GPIO_PXDWR, mask, value ? mask : 0);
549 sa1111_gpio_modify(reg + SA1111_GPIO_PXSSR, mask, value ? mask : 0);
550 sa1111_gpio_modify(reg + SA1111_GPIO_PXDDR, mask, 0);
551 sa1111_gpio_modify(reg + SA1111_GPIO_PXSDR, mask, 0);
552 spin_unlock_irqrestore(&sachip->lock, flags);
553
554 return 0;
555 }
556
sa1111_gpio_get(struct gpio_chip * gc,unsigned offset)557 static int sa1111_gpio_get(struct gpio_chip *gc, unsigned offset)
558 {
559 struct sa1111 *sachip = gc_to_sa1111(gc);
560 void __iomem *reg = sa1111_gpio_map_reg(sachip, offset);
561 u32 mask = sa1111_gpio_map_bit(offset);
562
563 return !!(readl_relaxed(reg + SA1111_GPIO_PXDRR) & mask);
564 }
565
sa1111_gpio_set(struct gpio_chip * gc,unsigned offset,int value)566 static void sa1111_gpio_set(struct gpio_chip *gc, unsigned offset, int value)
567 {
568 struct sa1111 *sachip = gc_to_sa1111(gc);
569 unsigned long flags;
570 void __iomem *reg = sa1111_gpio_map_reg(sachip, offset);
571 u32 mask = sa1111_gpio_map_bit(offset);
572
573 spin_lock_irqsave(&sachip->lock, flags);
574 sa1111_gpio_modify(reg + SA1111_GPIO_PXDWR, mask, value ? mask : 0);
575 sa1111_gpio_modify(reg + SA1111_GPIO_PXSSR, mask, value ? mask : 0);
576 spin_unlock_irqrestore(&sachip->lock, flags);
577 }
578
sa1111_gpio_set_multiple(struct gpio_chip * gc,unsigned long * mask,unsigned long * bits)579 static void sa1111_gpio_set_multiple(struct gpio_chip *gc, unsigned long *mask,
580 unsigned long *bits)
581 {
582 struct sa1111 *sachip = gc_to_sa1111(gc);
583 unsigned long flags;
584 void __iomem *reg = sachip->base + SA1111_GPIO;
585 u32 msk, val;
586
587 msk = *mask;
588 val = *bits;
589
590 spin_lock_irqsave(&sachip->lock, flags);
591 sa1111_gpio_modify(reg + SA1111_GPIO_PADWR, msk & 15, val);
592 sa1111_gpio_modify(reg + SA1111_GPIO_PASSR, msk & 15, val);
593 sa1111_gpio_modify(reg + SA1111_GPIO_PBDWR, (msk >> 4) & 255, val >> 4);
594 sa1111_gpio_modify(reg + SA1111_GPIO_PBSSR, (msk >> 4) & 255, val >> 4);
595 sa1111_gpio_modify(reg + SA1111_GPIO_PCDWR, (msk >> 12) & 255, val >> 12);
596 sa1111_gpio_modify(reg + SA1111_GPIO_PCSSR, (msk >> 12) & 255, val >> 12);
597 spin_unlock_irqrestore(&sachip->lock, flags);
598 }
599
sa1111_gpio_to_irq(struct gpio_chip * gc,unsigned offset)600 static int sa1111_gpio_to_irq(struct gpio_chip *gc, unsigned offset)
601 {
602 struct sa1111 *sachip = gc_to_sa1111(gc);
603
604 return sa1111_map_irq(sachip, offset);
605 }
606
sa1111_setup_gpios(struct sa1111 * sachip)607 static int sa1111_setup_gpios(struct sa1111 *sachip)
608 {
609 sachip->gc.label = "sa1111";
610 sachip->gc.parent = sachip->dev;
611 sachip->gc.owner = THIS_MODULE;
612 sachip->gc.get_direction = sa1111_gpio_get_direction;
613 sachip->gc.direction_input = sa1111_gpio_direction_input;
614 sachip->gc.direction_output = sa1111_gpio_direction_output;
615 sachip->gc.get = sa1111_gpio_get;
616 sachip->gc.set = sa1111_gpio_set;
617 sachip->gc.set_multiple = sa1111_gpio_set_multiple;
618 sachip->gc.to_irq = sa1111_gpio_to_irq;
619 sachip->gc.base = -1;
620 sachip->gc.ngpio = 18;
621
622 return devm_gpiochip_add_data(sachip->dev, &sachip->gc, sachip);
623 }
624
625 /*
626 * Bring the SA1111 out of reset. This requires a set procedure:
627 * 1. nRESET asserted (by hardware)
628 * 2. CLK turned on from SA1110
629 * 3. nRESET deasserted
630 * 4. VCO turned on, PLL_BYPASS turned off
631 * 5. Wait lock time, then assert RCLKEn
632 * 7. PCR set to allow clocking of individual functions
633 *
634 * Until we've done this, the only registers we can access are:
635 * SBI_SKCR
636 * SBI_SMCR
637 * SBI_SKID
638 */
sa1111_wake(struct sa1111 * sachip)639 static void sa1111_wake(struct sa1111 *sachip)
640 {
641 unsigned long flags, r;
642
643 spin_lock_irqsave(&sachip->lock, flags);
644
645 clk_enable(sachip->clk);
646
647 /*
648 * Turn VCO on, and disable PLL Bypass.
649 */
650 r = readl_relaxed(sachip->base + SA1111_SKCR);
651 r &= ~SKCR_VCO_OFF;
652 writel_relaxed(r, sachip->base + SA1111_SKCR);
653 r |= SKCR_PLL_BYPASS | SKCR_OE_EN;
654 writel_relaxed(r, sachip->base + SA1111_SKCR);
655
656 /*
657 * Wait lock time. SA1111 manual _doesn't_
658 * specify a figure for this! We choose 100us.
659 */
660 udelay(100);
661
662 /*
663 * Enable RCLK. We also ensure that RDYEN is set.
664 */
665 r |= SKCR_RCLKEN | SKCR_RDYEN;
666 writel_relaxed(r, sachip->base + SA1111_SKCR);
667
668 /*
669 * Wait 14 RCLK cycles for the chip to finish coming out
670 * of reset. (RCLK=24MHz). This is 590ns.
671 */
672 udelay(1);
673
674 /*
675 * Ensure all clocks are initially off.
676 */
677 writel_relaxed(0, sachip->base + SA1111_SKPCR);
678
679 spin_unlock_irqrestore(&sachip->lock, flags);
680 }
681
682 #ifdef CONFIG_ARCH_SA1100
683
684 static u32 sa1111_dma_mask[] = {
685 ~0,
686 ~(1 << 20),
687 ~(1 << 23),
688 ~(1 << 24),
689 ~(1 << 25),
690 ~(1 << 20),
691 ~(1 << 20),
692 0,
693 };
694
695 /*
696 * Configure the SA1111 shared memory controller.
697 */
698 static void
sa1111_configure_smc(struct sa1111 * sachip,int sdram,unsigned int drac,unsigned int cas_latency)699 sa1111_configure_smc(struct sa1111 *sachip, int sdram, unsigned int drac,
700 unsigned int cas_latency)
701 {
702 unsigned int smcr = SMCR_DTIM | SMCR_MBGE | FInsrt(drac, SMCR_DRAC);
703
704 if (cas_latency == 3)
705 smcr |= SMCR_CLAT;
706
707 writel_relaxed(smcr, sachip->base + SA1111_SMCR);
708
709 /*
710 * Now clear the bits in the DMA mask to work around the SA1111
711 * DMA erratum (Intel StrongARM SA-1111 Microprocessor Companion
712 * Chip Specification Update, June 2000, Erratum #7).
713 */
714 if (sachip->dev->dma_mask)
715 *sachip->dev->dma_mask &= sa1111_dma_mask[drac >> 2];
716
717 sachip->dev->coherent_dma_mask &= sa1111_dma_mask[drac >> 2];
718 }
719 #endif
720
sa1111_dev_release(struct device * _dev)721 static void sa1111_dev_release(struct device *_dev)
722 {
723 struct sa1111_dev *dev = to_sa1111_device(_dev);
724
725 kfree(dev);
726 }
727
728 static int
sa1111_init_one_child(struct sa1111 * sachip,struct resource * parent,struct sa1111_dev_info * info)729 sa1111_init_one_child(struct sa1111 *sachip, struct resource *parent,
730 struct sa1111_dev_info *info)
731 {
732 struct sa1111_dev *dev;
733 unsigned i;
734 int ret;
735
736 dev = kzalloc(sizeof(struct sa1111_dev), GFP_KERNEL);
737 if (!dev) {
738 ret = -ENOMEM;
739 goto err_alloc;
740 }
741
742 device_initialize(&dev->dev);
743 dev_set_name(&dev->dev, "%4.4lx", info->offset);
744 dev->devid = info->devid;
745 dev->dev.parent = sachip->dev;
746 dev->dev.bus = &sa1111_bus_type;
747 dev->dev.release = sa1111_dev_release;
748 dev->res.start = sachip->phys + info->offset;
749 dev->res.end = dev->res.start + 511;
750 dev->res.name = dev_name(&dev->dev);
751 dev->res.flags = IORESOURCE_MEM;
752 dev->mapbase = sachip->base + info->offset;
753 dev->skpcr_mask = info->skpcr_mask;
754
755 for (i = 0; i < ARRAY_SIZE(info->hwirq); i++)
756 dev->hwirq[i] = info->hwirq[i];
757
758 /*
759 * If the parent device has a DMA mask associated with it, and
760 * this child supports DMA, propagate it down to the children.
761 */
762 if (info->dma && sachip->dev->dma_mask) {
763 dev->dma_mask = *sachip->dev->dma_mask;
764 dev->dev.dma_mask = &dev->dma_mask;
765 dev->dev.coherent_dma_mask = sachip->dev->coherent_dma_mask;
766 }
767
768 ret = request_resource(parent, &dev->res);
769 if (ret) {
770 dev_err(sachip->dev, "failed to allocate resource for %s\n",
771 dev->res.name);
772 goto err_resource;
773 }
774
775 ret = device_add(&dev->dev);
776 if (ret)
777 goto err_add;
778 return 0;
779
780 err_add:
781 release_resource(&dev->res);
782 err_resource:
783 put_device(&dev->dev);
784 err_alloc:
785 return ret;
786 }
787
788 /**
789 * sa1111_probe - probe for a single SA1111 chip.
790 * @phys_addr: physical address of device.
791 *
792 * Probe for a SA1111 chip. This must be called
793 * before any other SA1111-specific code.
794 *
795 * Returns:
796 * %-ENODEV device not found.
797 * %-EBUSY physical address already marked in-use.
798 * %-EINVAL no platform data passed
799 * %0 successful.
800 */
__sa1111_probe(struct device * me,struct resource * mem,int irq)801 static int __sa1111_probe(struct device *me, struct resource *mem, int irq)
802 {
803 struct sa1111_platform_data *pd = me->platform_data;
804 struct sa1111 *sachip;
805 unsigned long id;
806 unsigned int has_devs;
807 int i, ret = -ENODEV;
808
809 if (!pd)
810 return -EINVAL;
811
812 sachip = devm_kzalloc(me, sizeof(struct sa1111), GFP_KERNEL);
813 if (!sachip)
814 return -ENOMEM;
815
816 sachip->clk = devm_clk_get(me, "SA1111_CLK");
817 if (IS_ERR(sachip->clk))
818 return PTR_ERR(sachip->clk);
819
820 ret = clk_prepare(sachip->clk);
821 if (ret)
822 return ret;
823
824 spin_lock_init(&sachip->lock);
825
826 sachip->dev = me;
827 dev_set_drvdata(sachip->dev, sachip);
828
829 sachip->pdata = pd;
830 sachip->phys = mem->start;
831 sachip->irq = irq;
832
833 /*
834 * Map the whole region. This also maps the
835 * registers for our children.
836 */
837 sachip->base = ioremap(mem->start, PAGE_SIZE * 2);
838 if (!sachip->base) {
839 ret = -ENOMEM;
840 goto err_clk_unprep;
841 }
842
843 /*
844 * Probe for the chip. Only touch the SBI registers.
845 */
846 id = readl_relaxed(sachip->base + SA1111_SKID);
847 if ((id & SKID_ID_MASK) != SKID_SA1111_ID) {
848 printk(KERN_DEBUG "SA1111 not detected: ID = %08lx\n", id);
849 ret = -ENODEV;
850 goto err_unmap;
851 }
852
853 pr_info("SA1111 Microprocessor Companion Chip: silicon revision %lx, metal revision %lx\n",
854 (id & SKID_SIREV_MASK) >> 4, id & SKID_MTREV_MASK);
855
856 /*
857 * We found it. Wake the chip up, and initialise.
858 */
859 sa1111_wake(sachip);
860
861 /*
862 * The interrupt controller must be initialised before any
863 * other device to ensure that the interrupts are available.
864 */
865 ret = sa1111_setup_irq(sachip, pd->irq_base);
866 if (ret)
867 goto err_clk;
868
869 /* Setup the GPIOs - should really be done after the IRQ setup */
870 ret = sa1111_setup_gpios(sachip);
871 if (ret)
872 goto err_irq;
873
874 #ifdef CONFIG_ARCH_SA1100
875 {
876 unsigned int val;
877
878 /*
879 * The SDRAM configuration of the SA1110 and the SA1111 must
880 * match. This is very important to ensure that SA1111 accesses
881 * don't corrupt the SDRAM. Note that this ungates the SA1111's
882 * MBGNT signal, so we must have called sa1110_mb_disable()
883 * beforehand.
884 */
885 sa1111_configure_smc(sachip, 1,
886 FExtr(MDCNFG, MDCNFG_SA1110_DRAC0),
887 FExtr(MDCNFG, MDCNFG_SA1110_TDL0));
888
889 /*
890 * We only need to turn on DCLK whenever we want to use the
891 * DMA. It can otherwise be held firmly in the off position.
892 * (currently, we always enable it.)
893 */
894 val = readl_relaxed(sachip->base + SA1111_SKPCR);
895 writel_relaxed(val | SKPCR_DCLKEN, sachip->base + SA1111_SKPCR);
896
897 /*
898 * Enable the SA1110 memory bus request and grant signals.
899 */
900 sa1110_mb_enable();
901 }
902 #endif
903
904 g_sa1111 = sachip;
905
906 has_devs = ~0;
907 if (pd)
908 has_devs &= ~pd->disable_devs;
909
910 for (i = 0; i < ARRAY_SIZE(sa1111_devices); i++)
911 if (sa1111_devices[i].devid & has_devs)
912 sa1111_init_one_child(sachip, mem, &sa1111_devices[i]);
913
914 return 0;
915
916 err_irq:
917 sa1111_remove_irq(sachip);
918 err_clk:
919 clk_disable(sachip->clk);
920 err_unmap:
921 iounmap(sachip->base);
922 err_clk_unprep:
923 clk_unprepare(sachip->clk);
924 return ret;
925 }
926
sa1111_remove_one(struct device * dev,void * data)927 static int sa1111_remove_one(struct device *dev, void *data)
928 {
929 struct sa1111_dev *sadev = to_sa1111_device(dev);
930 if (dev->bus != &sa1111_bus_type)
931 return 0;
932 device_del(&sadev->dev);
933 release_resource(&sadev->res);
934 put_device(&sadev->dev);
935 return 0;
936 }
937
__sa1111_remove(struct sa1111 * sachip)938 static void __sa1111_remove(struct sa1111 *sachip)
939 {
940 device_for_each_child(sachip->dev, NULL, sa1111_remove_one);
941
942 sa1111_remove_irq(sachip);
943
944 clk_disable(sachip->clk);
945 clk_unprepare(sachip->clk);
946
947 iounmap(sachip->base);
948 }
949
950 struct sa1111_save_data {
951 unsigned int skcr;
952 unsigned int skpcr;
953 unsigned int skcdr;
954 unsigned char skaud;
955 unsigned char skpwm0;
956 unsigned char skpwm1;
957
958 /*
959 * Interrupt controller
960 */
961 unsigned int intpol0;
962 unsigned int intpol1;
963 unsigned int inten0;
964 unsigned int inten1;
965 unsigned int wakepol0;
966 unsigned int wakepol1;
967 unsigned int wakeen0;
968 unsigned int wakeen1;
969 };
970
971 #ifdef CONFIG_PM
972
sa1111_suspend_noirq(struct device * dev)973 static int sa1111_suspend_noirq(struct device *dev)
974 {
975 struct sa1111 *sachip = dev_get_drvdata(dev);
976 struct sa1111_save_data *save;
977 unsigned long flags;
978 unsigned int val;
979 void __iomem *base;
980
981 save = kmalloc(sizeof(struct sa1111_save_data), GFP_KERNEL);
982 if (!save)
983 return -ENOMEM;
984 sachip->saved_state = save;
985
986 spin_lock_irqsave(&sachip->lock, flags);
987
988 /*
989 * Save state.
990 */
991 base = sachip->base;
992 save->skcr = readl_relaxed(base + SA1111_SKCR);
993 save->skpcr = readl_relaxed(base + SA1111_SKPCR);
994 save->skcdr = readl_relaxed(base + SA1111_SKCDR);
995 save->skaud = readl_relaxed(base + SA1111_SKAUD);
996 save->skpwm0 = readl_relaxed(base + SA1111_SKPWM0);
997 save->skpwm1 = readl_relaxed(base + SA1111_SKPWM1);
998
999 writel_relaxed(0, sachip->base + SA1111_SKPWM0);
1000 writel_relaxed(0, sachip->base + SA1111_SKPWM1);
1001
1002 base = sachip->base + SA1111_INTC;
1003 save->intpol0 = readl_relaxed(base + SA1111_INTPOL0);
1004 save->intpol1 = readl_relaxed(base + SA1111_INTPOL1);
1005 save->inten0 = readl_relaxed(base + SA1111_INTEN0);
1006 save->inten1 = readl_relaxed(base + SA1111_INTEN1);
1007 save->wakepol0 = readl_relaxed(base + SA1111_WAKEPOL0);
1008 save->wakepol1 = readl_relaxed(base + SA1111_WAKEPOL1);
1009 save->wakeen0 = readl_relaxed(base + SA1111_WAKEEN0);
1010 save->wakeen1 = readl_relaxed(base + SA1111_WAKEEN1);
1011
1012 /*
1013 * Disable.
1014 */
1015 val = readl_relaxed(sachip->base + SA1111_SKCR);
1016 writel_relaxed(val | SKCR_SLEEP, sachip->base + SA1111_SKCR);
1017
1018 clk_disable(sachip->clk);
1019
1020 spin_unlock_irqrestore(&sachip->lock, flags);
1021
1022 #ifdef CONFIG_ARCH_SA1100
1023 sa1110_mb_disable();
1024 #endif
1025
1026 return 0;
1027 }
1028
1029 /*
1030 * sa1111_resume - Restore the SA1111 device state.
1031 * @dev: device to restore
1032 *
1033 * Restore the general state of the SA1111; clock control and
1034 * interrupt controller. Other parts of the SA1111 must be
1035 * restored by their respective drivers, and must be called
1036 * via LDM after this function.
1037 */
sa1111_resume_noirq(struct device * dev)1038 static int sa1111_resume_noirq(struct device *dev)
1039 {
1040 struct sa1111 *sachip = dev_get_drvdata(dev);
1041 struct sa1111_save_data *save;
1042 unsigned long flags, id;
1043 void __iomem *base;
1044
1045 save = sachip->saved_state;
1046 if (!save)
1047 return 0;
1048
1049 /*
1050 * Ensure that the SA1111 is still here.
1051 * FIXME: shouldn't do this here.
1052 */
1053 id = readl_relaxed(sachip->base + SA1111_SKID);
1054 if ((id & SKID_ID_MASK) != SKID_SA1111_ID) {
1055 __sa1111_remove(sachip);
1056 dev_set_drvdata(dev, NULL);
1057 kfree(save);
1058 return 0;
1059 }
1060
1061 /*
1062 * First of all, wake up the chip.
1063 */
1064 sa1111_wake(sachip);
1065
1066 #ifdef CONFIG_ARCH_SA1100
1067 /* Enable the memory bus request/grant signals */
1068 sa1110_mb_enable();
1069 #endif
1070
1071 /*
1072 * Only lock for write ops. Also, sa1111_wake must be called with
1073 * released spinlock!
1074 */
1075 spin_lock_irqsave(&sachip->lock, flags);
1076
1077 writel_relaxed(0, sachip->base + SA1111_INTC + SA1111_INTEN0);
1078 writel_relaxed(0, sachip->base + SA1111_INTC + SA1111_INTEN1);
1079
1080 base = sachip->base;
1081 writel_relaxed(save->skcr, base + SA1111_SKCR);
1082 writel_relaxed(save->skpcr, base + SA1111_SKPCR);
1083 writel_relaxed(save->skcdr, base + SA1111_SKCDR);
1084 writel_relaxed(save->skaud, base + SA1111_SKAUD);
1085 writel_relaxed(save->skpwm0, base + SA1111_SKPWM0);
1086 writel_relaxed(save->skpwm1, base + SA1111_SKPWM1);
1087
1088 base = sachip->base + SA1111_INTC;
1089 writel_relaxed(save->intpol0, base + SA1111_INTPOL0);
1090 writel_relaxed(save->intpol1, base + SA1111_INTPOL1);
1091 writel_relaxed(save->inten0, base + SA1111_INTEN0);
1092 writel_relaxed(save->inten1, base + SA1111_INTEN1);
1093 writel_relaxed(save->wakepol0, base + SA1111_WAKEPOL0);
1094 writel_relaxed(save->wakepol1, base + SA1111_WAKEPOL1);
1095 writel_relaxed(save->wakeen0, base + SA1111_WAKEEN0);
1096 writel_relaxed(save->wakeen1, base + SA1111_WAKEEN1);
1097
1098 spin_unlock_irqrestore(&sachip->lock, flags);
1099
1100 sachip->saved_state = NULL;
1101 kfree(save);
1102
1103 return 0;
1104 }
1105
1106 #else
1107 #define sa1111_suspend_noirq NULL
1108 #define sa1111_resume_noirq NULL
1109 #endif
1110
sa1111_probe(struct platform_device * pdev)1111 static int sa1111_probe(struct platform_device *pdev)
1112 {
1113 struct resource *mem;
1114 int irq;
1115
1116 mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1117 if (!mem)
1118 return -EINVAL;
1119 irq = platform_get_irq(pdev, 0);
1120 if (irq < 0)
1121 return irq;
1122
1123 return __sa1111_probe(&pdev->dev, mem, irq);
1124 }
1125
sa1111_remove(struct platform_device * pdev)1126 static void sa1111_remove(struct platform_device *pdev)
1127 {
1128 struct sa1111 *sachip = platform_get_drvdata(pdev);
1129
1130 if (sachip) {
1131 #ifdef CONFIG_PM
1132 kfree(sachip->saved_state);
1133 sachip->saved_state = NULL;
1134 #endif
1135 __sa1111_remove(sachip);
1136 platform_set_drvdata(pdev, NULL);
1137 }
1138 }
1139
1140 static struct dev_pm_ops sa1111_pm_ops = {
1141 .suspend_noirq = sa1111_suspend_noirq,
1142 .resume_noirq = sa1111_resume_noirq,
1143 };
1144
1145 /*
1146 * Not sure if this should be on the system bus or not yet.
1147 * We really want some way to register a system device at
1148 * the per-machine level, and then have this driver pick
1149 * up the registered devices.
1150 *
1151 * We also need to handle the SDRAM configuration for
1152 * PXA250/SA1110 machine classes.
1153 */
1154 static struct platform_driver sa1111_device_driver = {
1155 .probe = sa1111_probe,
1156 .remove_new = sa1111_remove,
1157 .driver = {
1158 .name = "sa1111",
1159 .pm = &sa1111_pm_ops,
1160 },
1161 };
1162
1163 /*
1164 * Get the parent device driver (us) structure
1165 * from a child function device
1166 */
sa1111_chip_driver(struct sa1111_dev * sadev)1167 static inline struct sa1111 *sa1111_chip_driver(struct sa1111_dev *sadev)
1168 {
1169 return (struct sa1111 *)dev_get_drvdata(sadev->dev.parent);
1170 }
1171
1172 /*
1173 * The bits in the opdiv field are non-linear.
1174 */
1175 static unsigned char opdiv_table[] = { 1, 4, 2, 8 };
1176
__sa1111_pll_clock(struct sa1111 * sachip)1177 static unsigned int __sa1111_pll_clock(struct sa1111 *sachip)
1178 {
1179 unsigned int skcdr, fbdiv, ipdiv, opdiv;
1180
1181 skcdr = readl_relaxed(sachip->base + SA1111_SKCDR);
1182
1183 fbdiv = (skcdr & 0x007f) + 2;
1184 ipdiv = ((skcdr & 0x0f80) >> 7) + 2;
1185 opdiv = opdiv_table[(skcdr & 0x3000) >> 12];
1186
1187 return 3686400 * fbdiv / (ipdiv * opdiv);
1188 }
1189
1190 /**
1191 * sa1111_pll_clock - return the current PLL clock frequency.
1192 * @sadev: SA1111 function block
1193 *
1194 * BUG: we should look at SKCR. We also blindly believe that
1195 * the chip is being fed with the 3.6864MHz clock.
1196 *
1197 * Returns the PLL clock in Hz.
1198 */
sa1111_pll_clock(struct sa1111_dev * sadev)1199 unsigned int sa1111_pll_clock(struct sa1111_dev *sadev)
1200 {
1201 struct sa1111 *sachip = sa1111_chip_driver(sadev);
1202
1203 return __sa1111_pll_clock(sachip);
1204 }
1205 EXPORT_SYMBOL(sa1111_pll_clock);
1206
1207 /**
1208 * sa1111_select_audio_mode - select I2S or AC link mode
1209 * @sadev: SA1111 function block
1210 * @mode: One of %SA1111_AUDIO_ACLINK or %SA1111_AUDIO_I2S
1211 *
1212 * Frob the SKCR to select AC Link mode or I2S mode for
1213 * the audio block.
1214 */
sa1111_select_audio_mode(struct sa1111_dev * sadev,int mode)1215 void sa1111_select_audio_mode(struct sa1111_dev *sadev, int mode)
1216 {
1217 struct sa1111 *sachip = sa1111_chip_driver(sadev);
1218 unsigned long flags;
1219 unsigned int val;
1220
1221 spin_lock_irqsave(&sachip->lock, flags);
1222
1223 val = readl_relaxed(sachip->base + SA1111_SKCR);
1224 if (mode == SA1111_AUDIO_I2S) {
1225 val &= ~SKCR_SELAC;
1226 } else {
1227 val |= SKCR_SELAC;
1228 }
1229 writel_relaxed(val, sachip->base + SA1111_SKCR);
1230
1231 spin_unlock_irqrestore(&sachip->lock, flags);
1232 }
1233 EXPORT_SYMBOL(sa1111_select_audio_mode);
1234
1235 /**
1236 * sa1111_set_audio_rate - set the audio sample rate
1237 * @sadev: SA1111 SAC function block
1238 * @rate: sample rate to select
1239 */
sa1111_set_audio_rate(struct sa1111_dev * sadev,int rate)1240 int sa1111_set_audio_rate(struct sa1111_dev *sadev, int rate)
1241 {
1242 struct sa1111 *sachip = sa1111_chip_driver(sadev);
1243 unsigned int div;
1244
1245 if (sadev->devid != SA1111_DEVID_SAC)
1246 return -EINVAL;
1247
1248 div = (__sa1111_pll_clock(sachip) / 256 + rate / 2) / rate;
1249 if (div == 0)
1250 div = 1;
1251 if (div > 128)
1252 div = 128;
1253
1254 writel_relaxed(div - 1, sachip->base + SA1111_SKAUD);
1255
1256 return 0;
1257 }
1258 EXPORT_SYMBOL(sa1111_set_audio_rate);
1259
1260 /**
1261 * sa1111_get_audio_rate - get the audio sample rate
1262 * @sadev: SA1111 SAC function block device
1263 */
sa1111_get_audio_rate(struct sa1111_dev * sadev)1264 int sa1111_get_audio_rate(struct sa1111_dev *sadev)
1265 {
1266 struct sa1111 *sachip = sa1111_chip_driver(sadev);
1267 unsigned long div;
1268
1269 if (sadev->devid != SA1111_DEVID_SAC)
1270 return -EINVAL;
1271
1272 div = readl_relaxed(sachip->base + SA1111_SKAUD) + 1;
1273
1274 return __sa1111_pll_clock(sachip) / (256 * div);
1275 }
1276 EXPORT_SYMBOL(sa1111_get_audio_rate);
1277
1278 /*
1279 * Individual device operations.
1280 */
1281
1282 /**
1283 * sa1111_enable_device - enable an on-chip SA1111 function block
1284 * @sadev: SA1111 function block device to enable
1285 */
sa1111_enable_device(struct sa1111_dev * sadev)1286 int sa1111_enable_device(struct sa1111_dev *sadev)
1287 {
1288 struct sa1111 *sachip = sa1111_chip_driver(sadev);
1289 unsigned long flags;
1290 unsigned int val;
1291 int ret = 0;
1292
1293 if (sachip->pdata && sachip->pdata->enable)
1294 ret = sachip->pdata->enable(sachip->pdata->data, sadev->devid);
1295
1296 if (ret == 0) {
1297 spin_lock_irqsave(&sachip->lock, flags);
1298 val = readl_relaxed(sachip->base + SA1111_SKPCR);
1299 writel_relaxed(val | sadev->skpcr_mask, sachip->base + SA1111_SKPCR);
1300 spin_unlock_irqrestore(&sachip->lock, flags);
1301 }
1302 return ret;
1303 }
1304 EXPORT_SYMBOL(sa1111_enable_device);
1305
1306 /**
1307 * sa1111_disable_device - disable an on-chip SA1111 function block
1308 * @sadev: SA1111 function block device to disable
1309 */
sa1111_disable_device(struct sa1111_dev * sadev)1310 void sa1111_disable_device(struct sa1111_dev *sadev)
1311 {
1312 struct sa1111 *sachip = sa1111_chip_driver(sadev);
1313 unsigned long flags;
1314 unsigned int val;
1315
1316 spin_lock_irqsave(&sachip->lock, flags);
1317 val = readl_relaxed(sachip->base + SA1111_SKPCR);
1318 writel_relaxed(val & ~sadev->skpcr_mask, sachip->base + SA1111_SKPCR);
1319 spin_unlock_irqrestore(&sachip->lock, flags);
1320
1321 if (sachip->pdata && sachip->pdata->disable)
1322 sachip->pdata->disable(sachip->pdata->data, sadev->devid);
1323 }
1324 EXPORT_SYMBOL(sa1111_disable_device);
1325
sa1111_get_irq(struct sa1111_dev * sadev,unsigned num)1326 int sa1111_get_irq(struct sa1111_dev *sadev, unsigned num)
1327 {
1328 struct sa1111 *sachip = sa1111_chip_driver(sadev);
1329 if (num >= ARRAY_SIZE(sadev->hwirq))
1330 return -EINVAL;
1331 return sa1111_map_irq(sachip, sadev->hwirq[num]);
1332 }
1333 EXPORT_SYMBOL_GPL(sa1111_get_irq);
1334
1335 /*
1336 * SA1111 "Register Access Bus."
1337 *
1338 * We model this as a regular bus type, and hang devices directly
1339 * off this.
1340 */
sa1111_match(struct device * _dev,struct device_driver * _drv)1341 static int sa1111_match(struct device *_dev, struct device_driver *_drv)
1342 {
1343 struct sa1111_dev *dev = to_sa1111_device(_dev);
1344 struct sa1111_driver *drv = SA1111_DRV(_drv);
1345
1346 return !!(dev->devid & drv->devid);
1347 }
1348
sa1111_bus_probe(struct device * dev)1349 static int sa1111_bus_probe(struct device *dev)
1350 {
1351 struct sa1111_dev *sadev = to_sa1111_device(dev);
1352 struct sa1111_driver *drv = SA1111_DRV(dev->driver);
1353 int ret = -ENODEV;
1354
1355 if (drv->probe)
1356 ret = drv->probe(sadev);
1357 return ret;
1358 }
1359
sa1111_bus_remove(struct device * dev)1360 static void sa1111_bus_remove(struct device *dev)
1361 {
1362 struct sa1111_dev *sadev = to_sa1111_device(dev);
1363 struct sa1111_driver *drv = SA1111_DRV(dev->driver);
1364
1365 if (drv->remove)
1366 drv->remove(sadev);
1367 }
1368
1369 struct bus_type sa1111_bus_type = {
1370 .name = "sa1111-rab",
1371 .match = sa1111_match,
1372 .probe = sa1111_bus_probe,
1373 .remove = sa1111_bus_remove,
1374 };
1375 EXPORT_SYMBOL(sa1111_bus_type);
1376
sa1111_driver_register(struct sa1111_driver * driver)1377 int sa1111_driver_register(struct sa1111_driver *driver)
1378 {
1379 driver->drv.bus = &sa1111_bus_type;
1380 return driver_register(&driver->drv);
1381 }
1382 EXPORT_SYMBOL(sa1111_driver_register);
1383
sa1111_driver_unregister(struct sa1111_driver * driver)1384 void sa1111_driver_unregister(struct sa1111_driver *driver)
1385 {
1386 driver_unregister(&driver->drv);
1387 }
1388 EXPORT_SYMBOL(sa1111_driver_unregister);
1389
sa1111_init(void)1390 static int __init sa1111_init(void)
1391 {
1392 int ret = bus_register(&sa1111_bus_type);
1393 if (ret == 0)
1394 platform_driver_register(&sa1111_device_driver);
1395 return ret;
1396 }
1397
sa1111_exit(void)1398 static void __exit sa1111_exit(void)
1399 {
1400 platform_driver_unregister(&sa1111_device_driver);
1401 bus_unregister(&sa1111_bus_type);
1402 }
1403
1404 subsys_initcall(sa1111_init);
1405 module_exit(sa1111_exit);
1406
1407 MODULE_DESCRIPTION("Intel Corporation SA1111 core driver");
1408 MODULE_LICENSE("GPL");
1409
