Searched refs:GPIO27 (Results 1 – 25 of 32) sorted by relevance
12
/Linux-v6.6/arch/arm/mach-pxa/ |
D | pxa300.c | 28 MFP_ADDR_X(GPIO27, GPIO98, 0x0400),
|
D | pxa320.c | 30 MFP_ADDR_X(GPIO27, GPIO48, 0x0400),
|
D | mfp-pxa27x.h | 151 #define GPIO27_FFUART_RTS MFP_CFG_OUT(GPIO27, AF3, DRIVE_HIGH) 215 #define GPIO27_SSP1_SYSCLK MFP_CFG_OUT(GPIO27, AF1, DRIVE_LOW) 222 #define GPIO27_SSP1_SCLKEN MFP_CFG_IN(GPIO27, AF2) 245 #define GPIO27_SSP2_EXTCLK MFP_CFG_IN(GPIO27, AF1) 375 #define GPIO27_CIF_DD_0 MFP_CFG_IN(GPIO27, AF3)
|
D | mfp-pxa2xx.h | 81 #define GPIO27_GPIO MFP_CFG_IN(GPIO27, AF0)
|
D | mfp-pxa300.h | 53 #define GPIO27_AC97_SDATA_OUT MFP_CFG(GPIO27, AF1) 270 #define GPIO27_SSP2_TXD MFP_CFG(GPIO27, AF2) 271 #define GPIO27_SSP2_RXD MFP_CFG(GPIO27, AF5) 488 #define GPIO27_U2D_OPMODE_0 MFP_CFG(GPIO27, AF4)
|
/Linux-v6.6/arch/arm/boot/dts/broadcom/ |
D | bcm2837-rpi-cm3-io3.dts | 46 "GPIO27",
|
D | bcm2835-rpi-cm1-io1.dts | 46 "GPIO27",
|
D | bcm2711-rpi-cm4-io.dts | 56 "GPIO27",
|
D | bcm2835-rpi-b.dts | 57 "GPIO27",
|
D | bcm2835-rpi-zero.dts | 59 "GPIO27",
|
D | bcm2836-rpi-2-b.dts | 56 "GPIO27",
|
D | bcm2835-rpi-b-rev2.dts | 57 "GPIO27",
|
D | bcm2835-rpi-a-plus.dts | 55 "GPIO27",
|
D | bcm2835-rpi-b-plus.dts | 57 "GPIO27",
|
D | bcm2837-rpi-zero-2-w.dts | 69 "GPIO27",
|
D | bcm2835-rpi-zero-w.dts | 69 "GPIO27",
|
D | bcm2837-rpi-3-b.dts | 83 "GPIO27",
|
D | bcm2837-rpi-3-a-plus.dts | 77 "GPIO27",
|
D | bcm2837-rpi-3-b-plus.dts | 83 "GPIO27",
|
D | bcm2711-rpi-4-b.dts | 103 "GPIO27",
|
/Linux-v6.6/drivers/pinctrl/ |
D | pinctrl-lantiq.h | 134 GPIO27, enumerator
|
D | pinctrl-xway.c | 142 MFP_XWAY(GPIO27, GPIO, EBU, NONE, MDIO), 158 static const unsigned ase_pins_mdio[] = {GPIO24, GPIO27}; 270 MFP_XWAY(GPIO27, GPIO, TDM, SDIO, ASC), 445 MFP_XWAY(GPIO27, GPIO, TDM, SDIO, ASC), 658 MFP_XWAY(GPIO27, GPIO, TDM, SDIO, USIF), 699 static const unsigned xrx200_pins_usif_uart_ri[] = {GPIO27}; 914 MFP_XWAY(GPIO27, GPIO, TDM, NONE, NONE),
|
/Linux-v6.6/arch/arm64/boot/dts/rockchip/ |
D | rk3566-soquartz-cm4.dts | 83 * pin 36 - ID_SD(GPIO27) - i2c3_sda_m0, pullup to vcc_3v3
|
D | rk3566-soquartz-blade.dts | 79 * pin 36 - ID_SD(GPIO27) - i2c3_sda_m0, pullup to vcc_3v3
|
/Linux-v6.6/Documentation/devicetree/bindings/pinctrl/ |
D | ste,abx500.txt | 128 pins = "GPIO27";
|
12