| /Linux-v6.1/drivers/media/platform/ti/omap3isp/ |
| D | isp.c | 159 static void isp_xclk_update(struct isp_xclk *xclk, u32 divider) in isp_xclk_update() argument
161 switch (xclk->id) { in isp_xclk_update()
163 isp_reg_clr_set(xclk->isp, OMAP3_ISP_IOMEM_MAIN, ISP_TCTRL_CTRL, in isp_xclk_update()
168 isp_reg_clr_set(xclk->isp, OMAP3_ISP_IOMEM_MAIN, ISP_TCTRL_CTRL, in isp_xclk_update()
177 struct isp_xclk *xclk = to_isp_xclk(hw); in isp_xclk_prepare() local
179 omap3isp_get(xclk->isp); in isp_xclk_prepare()
186 struct isp_xclk *xclk = to_isp_xclk(hw); in isp_xclk_unprepare() local
188 omap3isp_put(xclk->isp); in isp_xclk_unprepare()
193 struct isp_xclk *xclk = to_isp_xclk(hw); in isp_xclk_enable() local
196 spin_lock_irqsave(&xclk->lock, flags); in isp_xclk_enable()
[all …]
|
| /Linux-v6.1/Documentation/devicetree/bindings/media/i2c/ |
| D | ov7251.txt | 9 - clocks: Reference to the xclk clock.
10 - clock-names: Should be "xclk".
11 - clock-frequency: Frequency of the xclk clock.
37 clock-names = "xclk";
|
| D | ov5645.txt | 9 - clocks: Reference to the xclk clock.
10 - clock-names: Should be "xclk".
11 - clock-frequency: Frequency of the xclk clock.
39 clock-names = "xclk";
|
| D | imx290.txt | 12 - clocks: Reference to the xclk clock.
13 - clock-names: Should be "xclk".
14 - clock-frequency: Frequency of the xclk clock in Hz.
43 clock-names = "xclk";
|
| D | ov7670.txt | 9 - clocks: reference to the xclk input clock.
10 - clock-names: should be "xclk".
40 clock-names = "xclk";
|
| D | st,st-mipid02.txt | 15 - clocks: reference to the xclk input clock.
16 - clock-names: shall be "xclk".
57 clock-names = "xclk";
|
| D | ov9650.txt | 28 clocks = <&xclk>;
|
| /Linux-v6.1/drivers/media/usb/em28xx/ |
| D | em28xx-camera.c | 328 dev->board.xclk = EM28XX_XCLK_FREQUENCY_4_3MHZ; in em28xx_init_camera()
329 em28xx_write_reg(dev, EM28XX_R0F_XCLK, dev->board.xclk); in em28xx_init_camera()
355 dev->board.xclk = EM28XX_XCLK_FREQUENCY_48MHZ; in em28xx_init_camera()
356 em28xx_write_reg(dev, EM28XX_R0F_XCLK, dev->board.xclk); in em28xx_init_camera()
398 dev->board.xclk = EM28XX_XCLK_FREQUENCY_24MHZ; in em28xx_init_camera()
399 em28xx_write_reg(dev, EM28XX_R0F_XCLK, dev->board.xclk); in em28xx_init_camera()
|
| D | em28xx-input.c | 391 dev->board.xclk |= EM28XX_XCLK_IR_RC5_MODE; in em2860_ir_change_protocol()
395 dev->board.xclk &= ~EM28XX_XCLK_IR_RC5_MODE; in em2860_ir_change_protocol()
404 em28xx_write_reg_bits(dev, EM28XX_R0F_XCLK, dev->board.xclk, in em2860_ir_change_protocol()
420 dev->board.xclk |= EM28XX_XCLK_IR_RC5_MODE; in em2874_ir_change_protocol()
424 dev->board.xclk &= ~EM28XX_XCLK_IR_RC5_MODE; in em2874_ir_change_protocol()
429 dev->board.xclk |= EM28XX_XCLK_IR_RC5_MODE; in em2874_ir_change_protocol()
440 em28xx_write_reg_bits(dev, EM28XX_R0F_XCLK, dev->board.xclk, in em2874_ir_change_protocol()
|
| D | em28xx-cards.c | 674 .xclk = EM28XX_XCLK_FREQUENCY_20MHZ,
710 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
719 .xclk = EM28XX_XCLK_FREQUENCY_48MHZ,
1042 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
1136 .xclk = EM28XX_XCLK_I2S_MSB_TIMING |
1169 .xclk = EM28XX_XCLK_IR_RC5_MODE |
1195 .xclk = EM28XX_XCLK_IR_RC5_MODE |
1470 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */
1726 .xclk = EM28XX_XCLK_FREQUENCY_10MHZ,
1834 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
[all …]
|
| /Linux-v6.1/drivers/clk/ |
| D | clk-max9485.c | 78 struct clk *xclk; member
268 drvdata->xclk = devm_clk_get(dev, "xclk"); in max9485_i2c_probe()
269 if (IS_ERR(drvdata->xclk)) in max9485_i2c_probe()
270 return PTR_ERR(drvdata->xclk); in max9485_i2c_probe()
272 xclk_name = __clk_get_name(drvdata->xclk); in max9485_i2c_probe()
|
| /Linux-v6.1/drivers/media/i2c/ |
| D | imx290.c | 67 struct clk *xclk; member
847 ret = clk_prepare_enable(imx290->xclk); in imx290_power_on()
856 clk_disable_unprepare(imx290->xclk); in imx290_power_on()
875 clk_disable_unprepare(imx290->xclk); in imx290_power_off()
994 imx290->xclk = devm_clk_get(dev, "xclk"); in imx290_probe()
995 if (IS_ERR(imx290->xclk)) { in imx290_probe()
997 ret = PTR_ERR(imx290->xclk); in imx290_probe()
1016 ret = clk_set_rate(imx290->xclk, xclk_freq); in imx290_probe()
|
| D | imx214.c | 38 struct clk *xclk; member
447 ret = clk_prepare_enable(imx214->xclk); in imx214_power_on()
468 clk_disable_unprepare(imx214->xclk); in imx214_power_off()
968 imx214->xclk = devm_clk_get(dev, NULL); in imx214_probe()
969 if (IS_ERR(imx214->xclk)) { in imx214_probe()
971 return PTR_ERR(imx214->xclk); in imx214_probe()
974 ret = clk_set_rate(imx214->xclk, IMX214_DEFAULT_CLK_FREQ); in imx214_probe()
|
| D | ov7251.c | 133 struct clk *xclk; member
918 ret = clk_prepare_enable(ov7251->xclk); in ov7251_set_power_on()
938 clk_disable_unprepare(ov7251->xclk); in ov7251_set_power_on()
952 clk_disable_unprepare(ov7251->xclk); in ov7251_set_power_off()
1621 ov7251->xclk = devm_clk_get_optional(dev, NULL); in ov7251_probe()
1622 if (IS_ERR(ov7251->xclk)) in ov7251_probe()
1623 return dev_err_probe(dev, PTR_ERR(ov7251->xclk), in ov7251_probe()
1633 if (ret && !ov7251->xclk) in ov7251_probe()
1636 clk_rate = clk_get_rate(ov7251->xclk); in ov7251_probe()
1642 if (!ret && ov7251->xclk) { in ov7251_probe()
[all …]
|
| D | ov5645.c | 95 struct clk *xclk; member
646 ret = clk_prepare_enable(ov5645->xclk); in ov5645_set_power_on()
668 clk_disable_unprepare(ov5645->xclk); in ov5645_set_power_off()
1093 ov5645->xclk = devm_clk_get(dev, "xclk"); in ov5645_probe()
1094 if (IS_ERR(ov5645->xclk)) { in ov5645_probe()
1096 return PTR_ERR(ov5645->xclk); in ov5645_probe()
1112 ret = clk_set_rate(ov5645->xclk, xclk_freq); in ov5645_probe()
|
| D | ov5647.c | 102 struct clk *xclk; member
765 ret = clk_prepare_enable(sensor->xclk); in ov5647_power_on()
788 clk_disable_unprepare(sensor->xclk); in ov5647_power_on()
818 clk_disable_unprepare(sensor->xclk); in ov5647_power_off()
1380 sensor->xclk = devm_clk_get(dev, NULL); in ov5647_probe()
1381 if (IS_ERR(sensor->xclk)) { in ov5647_probe()
1383 return PTR_ERR(sensor->xclk); in ov5647_probe()
1386 xclk_freq = clk_get_rate(sensor->xclk); in ov5647_probe()
|
| D | st-mipid02.c | 92 struct clk *xclk; member
324 ret = clk_prepare_enable(bridge->xclk); in mipid02_set_power_on()
349 clk_disable_unprepare(bridge->xclk); in mipid02_set_power_on()
356 clk_disable_unprepare(bridge->xclk); in mipid02_set_power_off()
982 bridge->xclk = devm_clk_get(dev, "xclk"); in mipid02_probe()
983 if (IS_ERR(bridge->xclk)) { in mipid02_probe()
985 return PTR_ERR(bridge->xclk); in mipid02_probe()
988 clk_freq = clk_get_rate(bridge->xclk); in mipid02_probe()
|
| D | ov6650.c | 872 const struct ov6650_xclk *xclk = NULL; in ov6650_video_probe() local
889 xclk = &ov6650_xclk[i]; in ov6650_video_probe()
894 for (i = 0; !xclk && i < ARRAY_SIZE(ov6650_xclk); i++) { in ov6650_video_probe()
899 xclk = &ov6650_xclk[i]; in ov6650_video_probe()
901 xclk->rate / 1000); in ov6650_video_probe()
904 if (!xclk) { in ov6650_video_probe()
944 ret = ov6650_prog_dflt(client, xclk->clkrc); in ov6650_video_probe()
|
| D | imx219.c | 545 struct clk *xclk; /* system clock to IMX219 */ member
1148 ret = clk_prepare_enable(imx219->xclk); in imx219_power_on()
1174 clk_disable_unprepare(imx219->xclk); in imx219_power_off()
1463 imx219->xclk = devm_clk_get(dev, NULL); in imx219_probe()
1464 if (IS_ERR(imx219->xclk)) { in imx219_probe()
1466 return PTR_ERR(imx219->xclk); in imx219_probe()
1469 imx219->xclk_freq = clk_get_rate(imx219->xclk); in imx219_probe()
|
| /Linux-v6.1/Documentation/devicetree/bindings/clock/ |
| D | maxim,max9485.txt | 16 - clock-names: Must be set to "xclk"
44 clock-names = "xclk";
|
| /Linux-v6.1/drivers/gpu/drm/radeon/ |
| D | sumo_dpm.c | 123 u32 xclk = radeon_get_xclk(rdev); in sumo_program_git() local
126 xclk, 16, &p, &u); in sumo_program_git()
134 u32 xclk = radeon_get_xclk(rdev); in sumo_program_grsd() local
137 r600_calculate_u_and_p(1, xclk, 14, &p, &u); in sumo_program_grsd()
154 u32 xclk = radeon_get_xclk(rdev); in sumo_gfx_powergating_initialize() local
173 xclk, 16, &p, &u); in sumo_gfx_powergating_initialize()
179 xclk, 16, &p, &u); in sumo_gfx_powergating_initialize()
318 u32 xclk = radeon_get_xclk(rdev); in sumo_calculate_bsp() local
324 xclk, 16, &pi->bsp, &pi->bsu); in sumo_calculate_bsp()
327 xclk, 16, &pi->pbsp, &pi->pbsu); in sumo_calculate_bsp()
[all …]
|
| D | sumo_smc.c | 145 u32 xclk = radeon_get_xclk(rdev); in sumo_enable_boost_timer() local
150 period = 100 * (xclk / 100 / sumo_power_of_4(unit)); in sumo_enable_boost_timer()
|
| /Linux-v6.1/drivers/video/fbdev/aty/ |
| D | atyfb_base.c | 327 static int xclk; variable
383 int pll, mclk, xclk, ecp_max; member
472 par->pll_limits.xclk = aty_chips[i].xclk; in correct_chipset()
500 par->pll_limits.xclk = 67; in correct_chipset()
508 par->pll_limits.xclk = 67; in correct_chipset()
518 par->pll_limits.xclk = 67; in correct_chipset()
526 par->pll_limits.xclk = 67; in correct_chipset()
538 par->pll_limits.xclk = 67; in correct_chipset()
546 par->pll_limits.xclk = 67; in correct_chipset()
2299 static void aty_calc_mem_refresh(struct atyfb_par *par, int xclk) in aty_calc_mem_refresh() argument
[all …]
|
| /Linux-v6.1/arch/arm/boot/dts/ |
| D | r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi | 19 clock-names = "xclk";
|
| D | pxa300-raumfeld-tuneable-clock.dtsi | 64 clock-names = "xclk";
|
