| /Linux-v6.1/drivers/rtc/ |
| D | rtc-ds1685.c | 162 (rtc->read(rtc, RTC_CTRL_A) & ~(RTC_CTRL_A_DV0))); in ds1685_rtc_switch_to_bank0()
173 (rtc->read(rtc, RTC_CTRL_A) | RTC_CTRL_A_DV0)); in ds1685_rtc_switch_to_bank1()
194 (rtc->read(rtc, RTC_CTRL_B) | RTC_CTRL_B_SET)); in ds1685_rtc_begin_data_access()
200 while (rtc->read(rtc, RTC_EXT_CTRL_4A) & RTC_CTRL_4A_INCR) in ds1685_rtc_begin_data_access()
220 (rtc->read(rtc, RTC_CTRL_B) & ~(RTC_CTRL_B_SET))); in ds1685_rtc_end_data_access()
240 ssn[0] = rtc->read(rtc, RTC_BANK1_SSN_MODEL); in ds1685_rtc_get_ssn()
241 ssn[1] = rtc->read(rtc, RTC_BANK1_SSN_BYTE_1); in ds1685_rtc_get_ssn()
242 ssn[2] = rtc->read(rtc, RTC_BANK1_SSN_BYTE_2); in ds1685_rtc_get_ssn()
243 ssn[3] = rtc->read(rtc, RTC_BANK1_SSN_BYTE_3); in ds1685_rtc_get_ssn()
244 ssn[4] = rtc->read(rtc, RTC_BANK1_SSN_BYTE_4); in ds1685_rtc_get_ssn()
[all …]
|
| D | rtc-bq4802.c | 26 u8 (*read)(struct bq4802 *, int); member
59 val = p->read(p, 0x0e); in bq4802_read_time()
62 tm->tm_sec = p->read(p, 0x00); in bq4802_read_time()
63 tm->tm_min = p->read(p, 0x02); in bq4802_read_time()
64 tm->tm_hour = p->read(p, 0x04); in bq4802_read_time()
65 tm->tm_mday = p->read(p, 0x06); in bq4802_read_time()
66 tm->tm_mon = p->read(p, 0x09); in bq4802_read_time()
67 tm->tm_year = p->read(p, 0x0a); in bq4802_read_time()
68 tm->tm_wday = p->read(p, 0x08); in bq4802_read_time()
69 century = p->read(p, 0x0f); in bq4802_read_time()
[all …]
|
| /Linux-v6.1/Documentation/userspace-api/media/v4l/ |
| D | func-read.rst | 4 .. _func-read:
7 V4L2 read()
13 v4l2-read - Read from a V4L2 device
22 .. c:function:: ssize_t read( int fd, void *buf, size_t count )
34 Max number of bytes to read
39 :c:func:`read()` attempts to read up to ``count`` bytes from file
42 section, see ##. If ``count`` is zero, :c:func:`read()` returns zero
45 :c:func:`read()` call will provide at most one frame (two fields)
48 By default :c:func:`read()` blocks until data becomes available. When
54 :c:func:`read()` function must also support :c:func:`select()` and
[all …]
|
| /Linux-v6.1/Documentation/ABI/testing/ |
| D | configfs-spear-pcie-gadget | 20 link used to enable ltssm and read its status.
21 int_type used to configure and read type of supported interrupt
23 to read no of MSI granted.
26 vendor_id used to write and read vendor id (hex)
27 device_id used to write and read device id (hex)
28 bar0_size used to write and read bar0_size
29 bar0_address used to write and read bar0 mapped area in hex.
30 bar0_rw_offset used to write and read offset of bar0 where bar0_data
31 will be written or read.
32 bar0_data used to write and read data at bar0_rw_offset.
|
| D | sysfs-driver-xdata | 17 The user can read the current PCIe link throughput generated
24 The file is read and write.
26 What: /sys/class/misc/dw-xdata-pcie.<device>/read
31 will create read TLPs frames - from the Endpoint to the Root
38 echo 1 > /sys/class/misc/dw-xdata-pcie.<device>/read
40 echo 0 > /sys/class/misc/dw-xdata-pcie.<device>/read
42 The user can read the current PCIe link throughput generated
46 cat /sys/class/misc/dw-xdata-pcie.<device>/read
49 The file is read and write.
|
| D | sysfs-class-switchtec | 19 (read only)
27 Description: Component revision stored in the hardware (read only)
36 (read only)
44 Description: Device version as stored in the hardware (read only)
52 Description: Currently running firmware version (read only)
60 Description: Partition number for this device in the switch (read only)
68 Description: Total number of partitions in the switch (read only)
77 (read only)
86 (read only)
95 (read only)
|
| D | sysfs-class-watchdog | 5 It is a read only file. It contains status of the watchdog
13 It is a read only file. It contains identity string of
20 It is a read/write file. While reading, it gives '1'
32 It is a read only file. It gives active/inactive status of
39 It is a read only file. It contains watchdog device's
47 It is a read only file. It contains value of time left for
55 It is a read only file. It is read to know about current
62 It is a read only file. It specifies the time in seconds before
70 It is a read only file. It shows the pretimeout governors
77 It is a read/write file. When read, the currently assigned
[all …]
|
| /Linux-v6.1/drivers/gpu/drm/amd/display/modules/hdcp/ |
| D | hdcp_ddc.c | 150 static enum mod_hdcp_status read(struct mod_hdcp *hdcp, in read() function
197 status = read(hdcp, msg_id, buf + data_offset, cur_size); in read_repeatedly()
248 return read(hdcp, MOD_HDCP_MESSAGE_ID_READ_BKSV, in mod_hdcp_read_bksv()
255 return read(hdcp, MOD_HDCP_MESSAGE_ID_READ_BCAPS, in mod_hdcp_read_bcaps()
265 status = read(hdcp, MOD_HDCP_MESSAGE_ID_READ_BSTATUS, in mod_hdcp_read_bstatus()
269 status = read(hdcp, MOD_HDCP_MESSAGE_ID_READ_BSTATUS, in mod_hdcp_read_bstatus()
277 return read(hdcp, MOD_HDCP_MESSAGE_ID_READ_RI_R0, in mod_hdcp_read_r0p()
293 status = read(hdcp, MOD_HDCP_MESSAGE_ID_READ_KSV_FIFO, in mod_hdcp_read_ksvlist()
303 status = read(hdcp, MOD_HDCP_MESSAGE_ID_READ_VH_0, in mod_hdcp_read_vp()
308 status = read(hdcp, MOD_HDCP_MESSAGE_ID_READ_VH_1, in mod_hdcp_read_vp()
[all …]
|
| /Linux-v6.1/drivers/gpu/drm/amd/amdgpu/ |
| D | amdgpu_eeprom.c | 91 u8 *eeprom_buf, u16 buf_size, bool read) in __amdgpu_eeprom_xfer() argument
101 .flags = read ? I2C_M_RD : 0, in __amdgpu_eeprom_xfer()
117 if (!read) { in __amdgpu_eeprom_xfer()
153 if (!read) { in __amdgpu_eeprom_xfer()
180 u8 *eeprom_buf, u16 buf_size, bool read) in amdgpu_eeprom_xfer() argument
187 else if (read) in amdgpu_eeprom_xfer()
194 eeprom_buf, buf_size, read); in amdgpu_eeprom_xfer()
199 read ? "read" : "write", EEPROM_OFFSET_SIZE); in amdgpu_eeprom_xfer()
215 eeprom_buf, ps, read); in amdgpu_eeprom_xfer()
|
| /Linux-v6.1/Documentation/admin-guide/ |
| D | ufs.rst | 20 default value, supported as read-only
24 supported as read-write
28 supported as read-write
35 supported as read-write
39 supported as read-write
43 supported as read-only
47 supported as read-only
51 supported as read-only
55 supported as read-only
|
| /Linux-v6.1/arch/parisc/kernel/ |
| D | perf_asm.S | 91 ;* arg0 : rdr to be read
98 ;* arg0 : rdr to be read
114 ; read(shift in) the RDR.
173 ; RDR 2 read sequence
185 ; RDR 3 read sequence
197 ; RDR 4 read sequence
209 ; RDR 5 read sequence
221 ; RDR 6 read sequence
233 ; RDR 7 read sequence
245 ; RDR 8 read sequence
[all …]
|
| /Linux-v6.1/Documentation/filesystems/spufs/ |
| D | spufs.rst | 44 tem calls like read(2) or write(2), but often support only a subset of
49 All files that support the read(2) operation also support readv(2) and
57 possible operations, e.g. read access on the wbox file.
68 read(2), pread(2), write(2), pwrite(2), lseek(2)
81 The first SPU to CPU communication mailbox. This file is read-only and
82 can be read in units of 32 bits. The file can only be used in non-
86 read(2)
87 If a count smaller than four is requested, read returns -1 and
90 When data has been read successfully, four bytes are placed in
96 the first mailbox file, but can be read in blocking I/O mode, and the
[all …]
|
| /Linux-v6.1/Documentation/userspace-api/media/rc/ |
| D | lirc-read.rst | 4 .. _lirc-read:
7 LIRC read()
13 lirc-read - Read from a LIRC device
22 .. c:function:: ssize_t read( int fd, void *buf, size_t count )
34 Max number of bytes to read
39 :c:func:`read()` attempts to read up to ``count`` bytes from file
41 :c:func:`read()` returns zero and has no other results. If ``count``
50 read from the chardev.
62 On success, the number of bytes read is returned. It is not an error if
|
| /Linux-v6.1/drivers/crypto/inside-secure/ |
| D | safexcel_ring.c | 30 cdr->read = cdr->base; in safexcel_init_ring_descriptors()
67 rdr->read = rdr->base; in safexcel_init_ring_descriptors()
87 if ((ring->write == ring->read - ring->offset) || in safexcel_ring_next_cwptr()
88 (ring->read == ring->base && ring->write == ring->base_end)) in safexcel_ring_next_cwptr()
111 if ((ring->write == ring->read - ring->offset) || in safexcel_ring_next_rwptr()
112 (ring->read == ring->base && ring->write == ring->base_end)) in safexcel_ring_next_rwptr()
126 void *ptr = ring->read; in safexcel_ring_next_rptr()
128 if (ring->write == ring->read) in safexcel_ring_next_rptr()
131 if (ring->read == ring->base_end) in safexcel_ring_next_rptr()
132 ring->read = ring->base; in safexcel_ring_next_rptr()
[all …]
|
| /Linux-v6.1/include/trace/events/ |
| D | mdio.h | 12 TP_PROTO(struct mii_bus *bus, char read,
15 TP_ARGS(bus, read, addr, regnum, val, err),
21 __field(char, read)
29 __entry->read = read;
36 __entry->busid, __entry->read ? "read" : "write",
|
| /Linux-v6.1/drivers/iio/temperature/ |
| D | mlx90632.c | 318 s16 read; in mlx90632_read_object_raw() local
331 read = (s16)read_tmp; in mlx90632_read_object_raw()
336 *object_new_raw = (read + (s16)read_tmp) / 2; in mlx90632_read_object_raw()
341 read = (s16)read_tmp; in mlx90632_read_object_raw()
346 *object_old_raw = (read + (s16)read_tmp) / 2; in mlx90632_read_object_raw()
397 s32 read; in mlx90632_read_object_raw_extended() local
403 read = (s16)read_tmp; in mlx90632_read_object_raw_extended()
408 read = read - (s16)read_tmp; in mlx90632_read_object_raw_extended()
413 read = read - (s16)read_tmp; in mlx90632_read_object_raw_extended()
418 read = (read + (s16)read_tmp) / 2; in mlx90632_read_object_raw_extended()
[all …]
|
| /Linux-v6.1/scripts/coccinelle/api/ |
| D | stream_open.cocci | 6 // its read and write. Rationale for the conversion is to avoid deadlock in
7 // between read and write.
80 // file_operations + whether they have _any_ .read, .write, .llseek ... at all.
95 .read = read_f,
188 // XXX for simplicity require no .{read/write}_iter and no .splice_{read/write} for now.
202 // read & write
213 .read = readstream,
232 …"ERROR: %s: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix." % (fops…
239 …"WARNING: %s: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream…
248 + nonseekable_open /* read & write (was deadlock) */
[all …]
|
| /Linux-v6.1/tools/testing/selftests/bpf/prog_tests/ |
| D | user_ringbuf.c | 40 int read; in write_samples() local
52 read = snprintf(entry->comm, sizeof(entry->comm), "%u", i); in write_samples()
53 if (read <= 0) { in write_samples()
57 ASSERT_GT(read, 0, "snprintf_comm"); in write_samples()
58 err = read; in write_samples()
176 ASSERT_EQ(skel->bss->read, 0, "no_reads_after_load"); in load_skel_create_ringbufs()
212 ASSERT_EQ(skel->bss->read, 0, "num_samples_before_bad_sample"); in manually_write_test_invalid_sample()
230 ASSERT_EQ(skel->bss->read, 0, "num_samples_after_bad_sample"); in manually_write_test_invalid_sample()
295 ASSERT_EQ(skel->bss->read, 0, "num_samples_read_before"); in test_user_ringbuf_basic()
301 ASSERT_EQ(skel->bss->read, 2, "num_samples_read_after"); in test_user_ringbuf_basic()
[all …]
|
| /Linux-v6.1/Documentation/hwmon/ |
| D | ltc2992.rst | 29 The following attributes are supported. Limits are read-write,
30 all other attributes are read-only.
39 inX_min_alarm An undervoltage occurred. Cleared on read.
40 inX_max_alarm An overvoltage occurred. Cleared on read.
47 currX_min_alarm An undercurrent occurred. Cleared on read.
48 currX_max_alarm An overcurrent occurred. Cleared on read.
55 powerX_min_alarm An underpower occurred. Cleared on read.
56 powerX_max_alarm An overpower occurred. Cleared on read.
|
| /Linux-v6.1/drivers/mtd/tests/ |
| D | subpagetest.c | 119 size_t read; in verify_eraseblock() local
125 err = mtd_read(mtd, addr, subpgsize, &read, readbuf); in verify_eraseblock()
126 if (unlikely(err || read != subpgsize)) { in verify_eraseblock()
127 if (mtd_is_bitflip(err) && read == subpgsize) { in verify_eraseblock()
152 err = mtd_read(mtd, addr, subpgsize, &read, readbuf); in verify_eraseblock()
153 if (unlikely(err || read != subpgsize)) { in verify_eraseblock()
154 if (mtd_is_bitflip(err) && read == subpgsize) { in verify_eraseblock()
180 size_t read; in verify_eraseblock2() local
189 err = mtd_read(mtd, addr, subpgsize * k, &read, readbuf); in verify_eraseblock2()
190 if (unlikely(err || read != subpgsize * k)) { in verify_eraseblock2()
[all …]
|
| D | torturetest.c | 73 static void report_corrupt(unsigned char *read, unsigned char *written);
92 size_t read; in check_eraseblock() local
102 err = mtd_read(mtd, addr, len, &read, check_buf); in check_eraseblock()
108 "read %zd\n", err, ebnum, read); in check_eraseblock()
112 if (read != len) { in check_eraseblock()
115 len, ebnum, read); in check_eraseblock()
364 static void print_bufs(unsigned char *read, unsigned char *written, int start,
371 static void report_corrupt(unsigned char *read, unsigned char *written) in report_corrupt() argument
383 if (countdiffs(written, read, i, pgsize, &bytes, in report_corrupt()
395 first = countdiffs(written, read, i, pgsize, &bytes, in report_corrupt()
[all …]
|
| /Linux-v6.1/Documentation/block/ |
| D | stat.rst | 29 read I/Os requests number of read I/Os processed
30 read merges requests number of read I/Os merged with in-queue I/O
31 read sectors sectors number of sectors read
32 read ticks milliseconds total wait time for read requests
48 read I/Os, write I/Os, discard I/0s
61 read merges, write merges, discard merges
67 read sectors, write sectors, discard_sectors
70 These values count the number of sectors read from, written to, or
75 read ticks, write ticks, discard ticks, flush ticks
81 example, if 60 read requests wait for an average of 30 ms, the read_ticks
[all …]
|
| /Linux-v6.1/drivers/gpio/ |
| D | gpio-lp3943.c | 87 u8 addr, read; in lp3943_get_gpio_in_status() local
102 err = lp3943_read_byte(lp3943_gpio->lp3943, addr, &read); in lp3943_get_gpio_in_status()
106 return !!(read & BIT(offset)); in lp3943_get_gpio_in_status()
114 u8 read; in lp3943_get_gpio_out_status() local
117 err = lp3943_read_byte(lp3943, mux[offset].reg, &read); in lp3943_get_gpio_out_status()
121 read = (read & mux[offset].mask) >> mux[offset].shift; in lp3943_get_gpio_out_status()
123 if (read == LP3943_GPIO_OUT_HIGH) in lp3943_get_gpio_out_status()
125 else if (read == LP3943_GPIO_OUT_LOW) in lp3943_get_gpio_out_status()
|
| /Linux-v6.1/include/sound/ |
| D | info.h | 30 void (*read)(struct snd_info_entry *entry, member
41 ssize_t (*read)(struct snd_info_entry *entry, void *file_private_data, member
141 void (*read)(struct snd_info_entry *, struct snd_info_buffer *)) in snd_info_set_text_ops()
144 entry->c.text.read = read; in snd_info_set_text_ops()
149 void (*read)(struct snd_info_entry *,
182 void (*read)(struct snd_info_entry *, struct snd_info_buffer *)) {} in snd_info_set_text_ops()
185 void (*read)(struct snd_info_entry *, in snd_card_rw_proc_new()
209 void (*read)(struct snd_info_entry *, in snd_card_ro_proc_new()
212 return snd_card_rw_proc_new(card, name, private_data, read, NULL); in snd_card_ro_proc_new()
|
| /Linux-v6.1/tools/perf/tests/ |
| D | sample-parsing.c | 80 COMP(read.group.nr); in samples_same()
82 COMP(read.one.value); in samples_same()
84 COMP(read.time_enabled); in samples_same()
86 COMP(read.time_running); in samples_same()
89 for (i = 0; i < s1->read.group.nr; i++) { in samples_same()
92 MCOMP(read.group.values[i]); in samples_same()
95 COMP(read.one.id); in samples_same()
97 COMP(read.one.lost); in samples_same()
253 .read = { in do_test()
289 sample.read.group.nr = 4; in do_test()
[all …]
|
