| /Linux-v6.1/arch/arm/boot/dts/ |
| D | imx7s-colibri-eval-v3.dts | 22 * The Atmel maxtouch controller uses SODIMM 28/30, also used for PWM<B>, PWM<C>, aka pwm2, pwm3.
23 * So if you enable following capacitive touch controller, disable pwm2/pwm3 first.
42 &pwm2 {
43 /* The pwm2 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */
|
| D | imx7s-colibri-iris.dts | 22 * The Atmel maxtouch controller uses SODIMM 28/30, also used for PWM<B>, PWM<C>, aka pwm2, pwm3.
23 * So if you enable following capacitive touch controller, disable pwm2/pwm3 first.
42 &pwm2 {
43 /* The pwm2 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */
|
| D | imx7d-colibri-eval-v3.dts | 22 * The Atmel maxtouch controller uses SODIMM 28/30, also used for PWM<B>, PWM<C>, aka pwm2, pwm3.
23 * So if you enable following capacitive touch controller, disable pwm2/pwm3 first.
42 &pwm2 {
43 /* The pwm2 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */
|
| D | imx7d-colibri-iris.dts | 22 * The Atmel maxtouch controller uses SODIMM 28/30, also used for PWM<B>, PWM<C>, aka pwm2, pwm3.
23 * So if you enable following capacitive touch controller, disable pwm2/pwm3 first.
42 &pwm2 {
43 /* The pwm2 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */
|
| D | imx7-colibri-eval-v3.dtsi | 21 * The Atmel maxtouch controller uses SODIMM 28/30, also used for PWM<B>, PWM<C>, aka pwm2, pwm3.
22 * So if you enable following capacitive touch controller, disable pwm2/pwm3 first.
66 &pwm2 {
67 /* The pwm2 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */
|
| D | imx7-colibri-iris.dtsi | 12 * The Atmel maxtouch controller uses SODIMM 28/30, also used for PWM<B>, PWM<C>, aka pwm2, pwm3.
13 * So if you enable following capacitive touch controller, disable pwm2/pwm3 first.
64 &pwm2 {
65 /* The pwm2 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */
|
| D | nuvoton-wpcm450.dtsi | 389 pwm2_pins: mux-pwm2 {
390 groups = "pwm2";
391 function = "pwm2";
|
| D | imx6q-var-dt6customboard.dts | 21 pwms = <&pwm2 0 50000>;
205 &pwm2 {
|
| D | spear320-hmi.dts | 80 pwm2 {
82 st,function = "pwm2";
|
| D | rk3229-evb.dts | 101 pwms = <&pwm2 0 25000 1>;
190 &pwm2 {
|
| D | exynos54xx-odroidxu-leds.dtsi | 36 pwm-names = "pwm2";
|
| D | imx7-colibri-aster.dtsi | 37 &pwm2 {
|
| D | rk3229-xms6.dts | 118 pwms = <&pwm2 0 25000 1>;
212 &pwm2 {
|
| D | imx6dl-colibri-aster.dts | 73 &pwm2 {
|
| D | imx6qdl-skov-revc-lt2.dtsi | 11 pwms = <&pwm2 0 20000 0>;
|
| D | exynos5422-odroidxu4.dts | 28 pwm-names = "pwm2";
|
| /Linux-v6.1/drivers/pinctrl/qcom/ |
| D | pinctrl-ipq8074.c | 886 FUNCTION(pwm2),
948 PINGROUP(20, led2, pwm2, NA, qdss_tracedata_b, NA, NA, NA, NA, NA),
953 PINGROUP(23, pwm2, blsp4_uart1, blsp4_spi1, blsp3_spi2, NA,
961 PINGROUP(27, audio_txfsync, pwm2, NA, qdss_tracedata_b, NA, NA, NA,
969 PINGROUP(31, audio_rxfsync, pwm2, atest_char2, NA, qdss_tracedata_b,
1020 PINGROUP(66, pta1_0, pwm2, prng_rosc, NA, NA, NA, NA, NA, NA),
|
| /Linux-v6.1/drivers/hwmon/ |
| D | smsc47m1.c | 432 static SENSOR_DEVICE_ATTR_RW(pwm2, pwm, 1);
714 int fan1, fan2, fan3, pwm1, pwm2, pwm3; in smsc47m1_probe() local
743 pwm2 = (smsc47m1_read_value(data, SMSC47M1_REG_PPIN(1)) & 0x05) in smsc47m1_probe()
762 if (!(fan1 || fan2 || fan3 || pwm1 || pwm2 || pwm3)) { in smsc47m1_probe()
810 if (pwm2) { in smsc47m1_probe()
|
| /Linux-v6.1/Documentation/hwmon/ |
| D | w83795.rst | 76 43 FANCTL2 11h (bank 2) pwm2
132 35 FANCTL2 11h (bank 2) pwm2
|
| /Linux-v6.1/Documentation/devicetree/bindings/clock/ |
| D | pwm-clock.txt | 25 pwms = <&pwm2 0 40>; /* 1 / 40 ns = 25 MHz */
|
| /Linux-v6.1/arch/arm64/boot/dts/renesas/ |
| D | beacon-renesom-baseboard.dtsi | 15 pwms = <&pwm2 0 25000>;
569 pwm2_pins: pwm2 {
571 function = "pwm2";
624 &pwm2 {
|
| /Linux-v6.1/arch/arm64/boot/dts/freescale/ |
| D | imx8mp-verdin-dahlia.dtsi | 78 &pwm2 {
|
| D | imx8mm-kontron-bl.dts | 65 pwms = <&pwm2 0 5000 0>;
145 &pwm2 {
|
| D | imx8mq-mnt-reform2.dts | 21 pwms = <&pwm2 0 10000 0>;
207 &pwm2 {
|
| /Linux-v6.1/Documentation/devicetree/bindings/pwm/ |
| D | pwm-sprd.txt | 25 "pwm2", "enable2",
|
