| /Linux-v6.1/Documentation/devicetree/bindings/clock/ |
| D | qoriq-clock.txt | 168 pll1: pll1@820 {
173 clock-output-names = "pll1", "pll1-div2";
180 clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
181 clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
189 clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
190 clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
|
| D | silabs,si5351.txt | 82 /* connect xtal input as source of pll0 and pll1 */
105 * - pll1 as clock source of multisynth1
107 * - multisynth1 can change pll1
|
| /Linux-v6.1/Documentation/devicetree/bindings/clock/ti/davinci/ |
| D | pll.txt | 10 - "ti,da850-pll1" for PLL1 on DA850/OMAP-L138/AM18XX
15 - for "ti,da850-pll1", shall be "clksrc"
80 pll1: clock-controller@21a000 {
81 compatible = "ti,da850-pll1";
|
| /Linux-v6.1/drivers/gpu/drm/nouveau/nvkm/subdev/devinit/ |
| D | nv04.c | 207 uint32_t pll1 = (oldpll1 & 0xfff80000) | pv->log2P << 16 | pv->NM1; in setPLL_double_highregs() local
216 pll1 = (pll1 & 0xfcc7ffff) | (pv->N2 & 0x18) << 21 | in setPLL_double_highregs()
231 pll1 = (pll1 & 0x7fffffff) | (single_stage ? 0x4 : 0xc) << 28; in setPLL_double_highregs()
233 if (oldpll1 == pll1 && oldpll2 == pll2) in setPLL_double_highregs()
267 nvkm_wr32(device, reg1, pll1); in setPLL_double_highregs()
|
| /Linux-v6.1/Documentation/devicetree/bindings/clock/st/ |
| D | st,clkgen-pll.txt | 15 "st,clkgen-pll1"
16 "st,clkgen-pll1-c0"
|
| /Linux-v6.1/drivers/gpu/drm/hisilicon/hibmc/ |
| D | hibmc_drm_de.c | 284 static void get_pll_config(u64 x, u64 y, u32 *pll1, u32 *pll2) in get_pll_config() argument
292 *pll1 = hibmc_pll_table[i].pll1_config_value; in get_pll_config()
299 *pll1 = CRT_PLL1_HS_25MHZ; in get_pll_config()
315 u32 pll1; /* bit[31:0] of PLL */ in display_ctrl_adjust() local
322 get_pll_config(x, y, &pll1, &pll2); in display_ctrl_adjust()
324 set_vclock_hisilicon(dev, pll1); in display_ctrl_adjust()
|
| /Linux-v6.1/drivers/gpu/drm/nouveau/dispnv04/ |
| D | hw.c | 132 nouveau_hw_decode_pll(struct drm_device *dev, uint32_t reg1, uint32_t pll1, in nouveau_hw_decode_pll() argument
140 pllvals->log2P = (pll1 >> 16) & 0x7; in nouveau_hw_decode_pll()
146 if (!(pll1 & 0x1100)) in nouveau_hw_decode_pll()
149 pllvals->NM1 = pll1 & 0xffff; in nouveau_hw_decode_pll()
154 if (pll1 & NV30_RAMDAC_ENABLE_VCO2) { in nouveau_hw_decode_pll()
155 pllvals->M2 = (pll1 >> 4) & 0x7; in nouveau_hw_decode_pll()
156 pllvals->N2 = ((pll1 >> 21) & 0x18) | in nouveau_hw_decode_pll()
157 ((pll1 >> 19) & 0x7); in nouveau_hw_decode_pll()
170 uint32_t reg1, pll1, pll2 = 0; in nouveau_hw_get_pllvals() local
178 pll1 = nvif_rd32(device, reg1); in nouveau_hw_get_pllvals()
[all …]
|
| /Linux-v6.1/drivers/gpu/drm/tegra/ |
| D | hdmi.c | 41 u32 pll1; member
139 .pll1 = SOR_PLL_TMDS_TERM_ENABLE,
154 .pll1 = SOR_PLL_TMDS_TERM_ENABLE | SOR_PLL_PE_EN,
172 .pll1 = SOR_PLL_TMDS_TERM_ENABLE,
186 .pll1 = SOR_PLL_TMDS_TERM_ENABLE | SOR_PLL_PE_EN,
200 .pll1 = SOR_PLL_TMDS_TERM_ENABLE | SOR_PLL_PE_EN,
217 .pll1 = SOR_PLL_LOADADJ(3) | SOR_PLL_TMDS_TERMADJ(0),
235 .pll1 = SOR_PLL_PE_EN | SOR_PLL_LOADADJ(3) |
254 .pll1 = SOR_PLL_PE_EN | SOR_PLL_LOADADJ(3) |
273 .pll1 = SOR_PLL_LOADADJ(3) | SOR_PLL_TMDS_TERMADJ(7)
[all …]
|
| D | sor.c | 366 unsigned int pll1; member
769 value = tegra_sor_readl(sor, sor->soc->regs->pll1); in tegra_sor_dp_term_calibrate()
771 tegra_sor_writel(sor, value, sor->soc->regs->pll1); in tegra_sor_dp_term_calibrate()
776 value = tegra_sor_readl(sor, sor->soc->regs->pll1); in tegra_sor_dp_term_calibrate()
779 tegra_sor_writel(sor, value, sor->soc->regs->pll1); in tegra_sor_dp_term_calibrate()
783 value = tegra_sor_readl(sor, sor->soc->regs->pll1); in tegra_sor_dp_term_calibrate()
790 value = tegra_sor_readl(sor, sor->soc->regs->pll1); in tegra_sor_dp_term_calibrate()
793 tegra_sor_writel(sor, value, sor->soc->regs->pll1); in tegra_sor_dp_term_calibrate()
900 value = tegra_sor_readl(sor, sor->soc->regs->pll1); in tegra_sor_dp_link_configure()
917 tegra_sor_writel(sor, value, sor->soc->regs->pll1); in tegra_sor_dp_link_configure()
[all …]
|
| /Linux-v6.1/drivers/media/i2c/ |
| D | ov7251.c | 110 const struct ov7251_pll1_cfg *pll1[]; member
219 .pll1 = {
227 .pll1 = {
816 configs->pll1[ov7251->link_freq_idx]->pre_div); in ov7251_pll_configure()
821 configs->pll1[ov7251->link_freq_idx]->mult); in ov7251_pll_configure()
825 configs->pll1[ov7251->link_freq_idx]->div); in ov7251_pll_configure()
830 configs->pll1[ov7251->link_freq_idx]->pix_div); in ov7251_pll_configure()
835 configs->pll1[ov7251->link_freq_idx]->mipi_div); in ov7251_pll_configure()
|
| /Linux-v6.1/sound/soc/codecs/ |
| D | tscs454.c | 131 struct pll pll1; member
292 pll_init(&tscs454->pll1, 1); in tscs454_data_init()
439 mutex_lock(&tscs454->pll1.lock); in coeff_ram_put()
458 mutex_unlock(&tscs454->pll1.lock); in coeff_ram_put()
683 mutex_lock(&tscs454->pll1.lock); in pll_connected()
684 users = tscs454->pll1.users; in pll_connected()
685 mutex_unlock(&tscs454->pll1.lock); in pll_connected()
710 bool pll1; in pll_power_event() local
716 pll1 = true; in pll_power_event()
718 pll1 = false; in pll_power_event()
[all …]
|
| /Linux-v6.1/arch/arm/boot/dts/ |
| D | stih407-clock.dtsi | 96 clk_s_c0_pll1: clk-s-c0-pll1 {
98 compatible = "st,clkgen-pll1-c0";
|
| D | stih410-clock.dtsi | 101 clk_s_c0_pll1: clk-s-c0-pll1 {
103 compatible = "st,clkgen-pll1-c0";
|
| D | stih418-clock.dtsi | 101 clk_s_c0_pll1: clk-s-c0-pll1 {
103 compatible = "st,clkgen-pll1-c0";
|
| D | dra72x.dtsi | 72 reg-names = "dss", "pll1_clkctrl", "pll1";
|
| D | dove-cubox.dts | 101 /* connect xtal input as source of pll0 and pll1 */
|
| D | dra74x.dtsi | 138 reg-names = "dss", "pll1_clkctrl", "pll1",
|
| /Linux-v6.1/drivers/clk/mxs/ |
| D | clk-imx28.c | 133 ref_xtal, pll0, pll1, pll2, ref_cpu, ref_emi, ref_io0, ref_io1, enumerator
169 clks[pll1] = mxs_clk_pll("pll1", "ref_xtal", PLL1CTRL0, 17, 480000000); in mx28_clocks_init()
|
| /Linux-v6.1/arch/arm/mach-davinci/ |
| D | dm355.c | 730 void __iomem *pll1, *psc; in dm355_init_time() local
736 pll1 = ioremap(DAVINCI_PLL1_BASE, SZ_1K); in dm355_init_time()
737 dm355_pll1_init(NULL, pll1, NULL); in dm355_init_time()
|
| D | dm365.c | 768 void __iomem *pll1, *pll2, *psc; in dm365_init_time() local
774 pll1 = ioremap(DAVINCI_PLL1_BASE, SZ_1K); in dm365_init_time()
775 dm365_pll1_init(NULL, pll1, NULL); in dm365_init_time()
|
| /Linux-v6.1/Documentation/devicetree/bindings/display/ti/ |
| D | ti,dra7-dss.txt | 24 'pll1', 'pll2_clkctrl', 'pll2'
|
| /Linux-v6.1/drivers/gpu/drm/i915/display/ |
| D | intel_dpll_mgr.h | 214 u32 ebb0, ebb4, pll0, pll1, pll2, pll3, pll6, pll8, pll9, pll10, pcsdw12; member
|
| /Linux-v6.1/Documentation/translations/zh_CN/core-api/ |
| D | printk-formats.rst | 525 %pC pll1
526 %pCn pll1
|
| /Linux-v6.1/drivers/clk/ |
| D | clk-k210.c | 1000 struct k210_pll pll1; in k210_clk_early_init() local
1006 k210_init_pll(regs, K210_PLL1, &pll1); in k210_clk_early_init()
1007 k210_pll_enable_hw(regs, &pll1); in k210_clk_early_init()
|
| /Linux-v6.1/drivers/phy/ti/ |
| D | Kconfig | 49 three clock selects (pll0, pll1, dig) and resets for each of the
|
