| /Linux-v6.1/Documentation/hwmon/ |
| D | pcf8591.rst | 25 The PCF8591 is an 8-bit A/D and D/A converter (4 analog inputs and one
29 The PCF8591 has 4 analog inputs programmable as single-ended or
30 differential inputs:
32 - mode 0 : four single ended inputs
33 Pins AIN0 to AIN3 are single ended inputs for channels 0 to 3
35 - mode 1 : three differential inputs
37 Pins AIN0 to AIN2 are positive differential inputs for channels 0 to 2
40 Pins AIN0 and AIN1 are single ended inputs for channels 0 and 1
44 - mode 3 : two differential inputs
59 - 0 = four single ended inputs
[all …]
|
| D | adm1026.rst | 23 List of GPIO pins (0-16) to program as inputs
50 sensor inputs and one internal sensor. Each sensor has a high and low
68 measurements. Several inputs have integrated attenuators so they can measure
70 dedicated inputs. There are several inputs scaled to 0-3V full-scale range
71 for SCSI terminator power. The remaining inputs are not scaled and have
82 The ADM1026 measures continuously. Analog inputs are measured about 4
87 temperature sensor inputs. Both the PWM output and the DAC output can be
|
| D | adt7475.rst | 51 measurement inputs and VID support. The ADT7490 also has additional
52 features, including extra voltage measurement inputs and PECI support. All
69 Each of the measured inputs (voltage, temperature, fan speed) has
73 The ADT747x samples all inputs continuously. The driver will not read
81 * 2 voltage inputs
85 * 2 voltage inputs
88 * 5 voltage inputs
92 * 6 voltage inputs
|
| D | dme1737.rst | 46 Enables the monitoring of voltage, fan and temp inputs
87 The voltage inputs are sampled with 12-bit resolution and have internal
89 millivolts and don't need scaling. The voltage inputs are mapped as follows
141 Celsius. The chip also features offsets for all 3 temperature inputs which -
144 need any user-space adjustments. The temperature inputs are mapped as follows
160 Fan RPMs are measured with 16-bit resolution. The chip provides inputs for 6
161 fan tachometers. All 6 inputs have an associated min limit which triggers an
162 alarm when crossed. Fan inputs 1-4 provide type attributes that need to be set
164 generates. Supported values are 1, 2, and 4. Fan inputs 5-6 only support fans
165 that generate 2 pulses per revolution. Fan inputs 5-6 also provide a max
[all …]
|
| D | max31790.rst | 28 Tachometer inputs monitor fan tachometer logic outputs for precise (+/-1%)
30 Six pins are dedicated tachometer inputs. Any of the six PWM outputs can
31 also be configured to serve as tachometer inputs.
|
| /Linux-v6.1/drivers/media/pci/saa7134/ |
| D | saa7134-cards.c | 64 .inputs = {{
79 .inputs = {{
107 .inputs = {{
154 .inputs = {{
195 .inputs = {{
224 .inputs = {{
272 .inputs = { {
319 .inputs = {{
348 .inputs = {{
373 .inputs = {{
[all …]
|
| /Linux-v6.1/Documentation/userspace-api/ioctl/ |
| D | cdrom.rst | 108 inputs:
129 inputs:
153 inputs:
184 inputs:
213 inputs:
238 inputs:
268 inputs:
293 inputs:
319 inputs:
346 inputs:
[all …]
|
| /Linux-v6.1/Documentation/userspace-api/media/v4l/ |
| D | audio.rst | 9 Audio inputs and outputs are physical connectors of a device. Video
10 capture devices have inputs, output devices have outputs, zero or more
11 each. Radio devices have no audio inputs or outputs. They have exactly
13 tuners with video inputs or outputs only, and radio devices have none of
17 Audio and video inputs and outputs are associated. Selecting a video
20 more than one video input or output. Assumed two composite video inputs
21 and two audio inputs exist, there may be up to four valid combinations.
28 To learn about the number and attributes of the available inputs and
53 multiple selectable audio inputs, all audio output ioctls when the
55 audio inputs or outputs the driver must set the ``V4L2_CAP_AUDIO`` flag
|
| D | video.rst | 9 Video inputs and outputs are physical connectors of a device. These can
12 be a video input. Video and VBI capture devices have inputs. Video and
14 no video inputs or outputs.
16 To learn about the number and attributes of the available inputs and
29 implement all the input ioctls when the device has one or more inputs,
|
| D | vidioc-g-input.rst | 42 only when there are no video inputs, returning ``EINVAL``.
46 to this integer. Side effects are possible. For example inputs may
52 Information about video inputs is available using the
|
| D | vidioc-enuminput.rst | 13 VIDIOC_ENUMINPUT - Enumerate video inputs
38 index is out of bounds. To enumerate all inputs applications shall begin
63 - Drivers can enumerate up to 32 video and audio inputs. This field
64 shows which audio inputs were selectable as audio source if this
69 When the driver does not enumerate audio inputs no bits must be
74 For details on audio inputs and how to select the current input
|
| /Linux-v6.1/sound/pci/hda/ |
| D | hda_auto_parser.c | 60 cfg->inputs[cfg->num_inputs].pin = nid; in add_auto_cfg_input_pin()
61 cfg->inputs[cfg->num_inputs].type = type; in add_auto_cfg_input_pin()
62 cfg->inputs[cfg->num_inputs].has_boost_on_pin = in add_auto_cfg_input_pin()
316 if (hsmic && can_be_headset_mic(codec, &cfg->inputs[i], 0xc)) { in snd_hda_parse_pin_defcfg()
317 cfg->inputs[i].is_headset_mic = 1; in snd_hda_parse_pin_defcfg()
319 } else if (hpmic && can_be_headset_mic(codec, &cfg->inputs[i], 0xd)) { in snd_hda_parse_pin_defcfg()
320 cfg->inputs[i].is_headphone_mic = 1; in snd_hda_parse_pin_defcfg()
326 if (!can_be_headset_mic(codec, &cfg->inputs[i], -1)) in snd_hda_parse_pin_defcfg()
329 cfg->inputs[i].is_headset_mic = 1; in snd_hda_parse_pin_defcfg()
332 cfg->inputs[i].is_headphone_mic = 1; in snd_hda_parse_pin_defcfg()
[all …]
|
| /Linux-v6.1/drivers/media/platform/renesas/vsp1/ |
| D | vsp1_drm.c | 130 crop = &vsp1->drm->inputs[rpf->entity.index].crop; in vsp1_du_pipeline_setup_rpf()
209 sel.r = vsp1->drm->inputs[rpf->entity.index].compose; in vsp1_du_pipeline_setup_rpf()
363 return vsp1->drm->inputs[rpf->entity.index].zpos; in rpf_zpos()
371 struct vsp1_rwpf *inputs[VSP1_MAX_RPF] = { NULL, }; in vsp1_du_pipeline_setup_inputs() local
385 if (!pipe->inputs[i]) in vsp1_du_pipeline_setup_inputs()
390 if (rpf_zpos(vsp1, inputs[j-1]) <= rpf_zpos(vsp1, rpf)) in vsp1_du_pipeline_setup_inputs()
392 inputs[j] = inputs[j-1]; in vsp1_du_pipeline_setup_inputs()
395 inputs[j] = rpf; in vsp1_du_pipeline_setup_inputs()
414 struct vsp1_rwpf *rpf = inputs[i]; in vsp1_du_pipeline_setup_inputs()
417 brx->inputs[i].rpf = NULL; in vsp1_du_pipeline_setup_inputs()
[all …]
|
| /Linux-v6.1/drivers/staging/media/atomisp/pci/ |
| D | atomisp_ioctl.c | 595 if (!isp->inputs[index].camera) in atomisp_enum_input()
599 strscpy(input->name, isp->inputs[index].camera->name, in atomisp_enum_input()
609 motor = isp->inputs[index].motor; in atomisp_enum_input()
626 input->reserved[0] = isp->inputs[index].type; in atomisp_enum_input()
627 input->reserved[1] = isp->inputs[index].port; in atomisp_enum_input()
691 if (isp->inputs[input].asd && isp->inputs[input].asd != asd) { in atomisp_s_input()
694 isp->inputs[input].asd->index); in atomisp_s_input()
698 camera = isp->inputs[input].camera; in atomisp_s_input()
705 if (isp->inputs[asd->input_curr].asd == asd && in atomisp_s_input()
707 ret = v4l2_subdev_call(isp->inputs[asd->input_curr].camera, in atomisp_s_input()
[all …]
|
| D | atomisp_v4l2.c | 910 if (isp->inputs[i].type != RAW_CAMERA && in atomisp_csi_lane_config()
911 isp->inputs[i].type != SOC_CAMERA) in atomisp_csi_lane_config()
914 mipi_info = atomisp_to_sensor_mipi_info(isp->inputs[i].camera); in atomisp_csi_lane_config()
1058 isp->inputs[isp->input_cnt].type = subdevs->type; in atomisp_subdev_probe()
1059 isp->inputs[isp->input_cnt].port = subdevs->port; in atomisp_subdev_probe()
1060 isp->inputs[isp->input_cnt].camera = subdev; in atomisp_subdev_probe()
1061 isp->inputs[isp->input_cnt].sensor_index = 0; in atomisp_subdev_probe()
1067 isp->inputs[isp->input_cnt].frame_size.pixel_format = 0; in atomisp_subdev_probe()
1101 isp->inputs[raw_index].motor = isp->motor; in atomisp_subdev_probe()
1213 if (isp->inputs[i].port >= ATOMISP_CAMERA_NR_PORTS) { in atomisp_register_entities()
[all …]
|
| /Linux-v6.1/Documentation/usb/ |
| D | chipidea.rst | 47 echo 1 > /sys/bus/platform/devices/ci_hdrc.0/inputs/b_bus_req
55 echo 0 > /sys/bus/platform/devices/ci_hdrc.0/inputs/b_bus_req
61 echo 1 > /sys/bus/platform/devices/ci_hdrc.0/inputs/a_bus_req
75 echo 0 > /sys/bus/platform/devices/ci_hdrc.0/inputs/a_bus_drop
76 echo 1 > /sys/bus/platform/devices/ci_hdrc.0/inputs/a_bus_req
82 echo 1 > /sys/bus/platform/devices/ci_hdrc.0/inputs/b_bus_req
88 echo 1 > /sys/bus/platform/devices/ci_hdrc.0/inputs/a_bus_drop
96 echo 1 > /sys/bus/platform/devices/ci_hdrc.0/inputs/b_bus_req
|
| /Linux-v6.1/arch/x86/kernel/cpu/sgx/ |
| D | encls.h | 67 #define __encls_ret_N(rax, inputs...) \ argument
75 : "a"(rax), inputs \
110 #define __encls_N(rax, rbx_out, inputs...) \ argument
119 : "a"(rax), inputs \
|
| /Linux-v6.1/drivers/media/platform/ti/davinci/ |
| D | vpif_capture.c | 667 subdev_name = chan_cfg->inputs[input_index].subdev_name; in vpif_input_to_subdev()
723 input = chan_cfg->inputs[index].input_route; in vpif_set_input()
724 output = chan_cfg->inputs[index].output_route; in vpif_set_input()
738 ch->video_dev.tvnorms = chan_cfg->inputs[index].input.std; in vpif_set_input()
787 if (!config->chan_config[ch->channel_id].inputs) in vpif_g_std()
791 input = chan_cfg->inputs[ch->input_idx].input; in vpif_g_std()
817 if (!config->chan_config[ch->channel_id].inputs) in vpif_s_std()
821 input = chan_cfg->inputs[ch->input_idx].input; in vpif_s_std()
867 memcpy(input, &chan_cfg->inputs[input->index].input, in vpif_enum_input()
1092 if (!config->chan_config[ch->channel_id].inputs) in vpif_enum_dv_timings()
[all …]
|
| /Linux-v6.1/drivers/hwmon/ |
| D | ina3221.c | 124 struct ina3221_input inputs[INA3221_NUM_CHANNELS]; member
153 struct ina3221_input *input = ina->inputs; in ina3221_summation_shunt_resistor()
330 struct ina3221_input *input = ina->inputs; in ina3221_read_curr()
434 struct ina3221_input *input = ina->inputs; in ina3221_write_curr()
591 *str = ina->inputs[index].label; in ina3221_read_string()
620 input = &ina->inputs[channel - 1]; in ina3221_is_visible()
699 struct ina3221_input *input = &ina->inputs[channel]; in ina3221_shunt_show()
711 struct ina3221_input *input = &ina->inputs[channel]; in ina3221_shunt_store()
778 input = &ina->inputs[val]; in ina3221_probe_child_from_dt()
853 ina->inputs[i].shunt_resistor = INA3221_RSHUNT_DEFAULT; in ina3221_probe()
[all …]
|
| /Linux-v6.1/Documentation/ABI/testing/ |
| D | sysfs-platform-chipidea-usb-otg | 1 What: /sys/bus/platform/devices/ci_hdrc.0/inputs/a_bus_req
18 What: /sys/bus/platform/devices/ci_hdrc.0/inputs/a_bus_drop
33 What: /sys/bus/platform/devices/ci_hdrc.0/inputs/b_bus_req
48 What: /sys/bus/platform/devices/ci_hdrc.0/inputs/a_clr_err
|
| D | sysfs-bus-iio-adc-max9611 | 13 between RS+ and RS- voltage sense inputs. In Ohms.
17 current flowing between RS+ and RS- inputs.
|
| /Linux-v6.1/arch/mips/include/asm/ |
| D | bitops.h | 26 #define __bit_op(mem, insn, inputs...) do { \ argument
39 : inputs \
43 #define __test_bit_op(mem, ll_dst, insn, inputs...) ({ \ argument
57 : inputs \
|
| /Linux-v6.1/drivers/hid/ |
| D | hid-holtek-kbd.c | 133 boot_hid_input = list_first_entry(&boot_hid->inputs, in holtek_kbd_input_event()
156 list_for_each_entry(hidinput, &hdev->inputs, list) { in holtek_kbd_probe()
|
| /Linux-v6.1/Documentation/devicetree/bindings/hwmon/ |
| D | aspeed-pwm-tacho.txt | 4 controller can support upto 16 Fan tachometer inputs.
7 one/two Fan tach inputs.
33 one/two Fan tach inputs.
|
| /Linux-v6.1/drivers/media/usb/go7007/ |
| D | go7007-usb.c | 90 .inputs = {
127 .inputs = {
166 .inputs = {
230 .inputs = {
288 .inputs = {
320 .inputs = {
352 .inputs = {
378 .inputs = {
410 .inputs = {
441 .inputs = {
[all …]
|
