1 /* 2 * This file is subject to the terms and conditions of the GNU General Public 3 * License. See the file "COPYING" in the main directory of this archive 4 * for more details. 5 * 6 * Derived from IRIX <sys/SN/klconfig.h>. 7 * 8 * Copyright (C) 1992 - 1997, 1999, 2000 Silicon Graphics, Inc. 9 * Copyright (C) 1999, 2000 by Ralf Baechle 10 */ 11 #ifndef _ASM_SN_KLCONFIG_H 12 #define _ASM_SN_KLCONFIG_H 13 14 /* 15 * The KLCONFIG structures store info about the various BOARDs found 16 * during Hardware Discovery. In addition, it stores info about the 17 * components found on the BOARDs. 18 */ 19 20 /* 21 * WARNING: 22 * Certain assembly language routines (notably xxxxx.s) in the IP27PROM 23 * will depend on the format of the data structures in this file. In 24 * most cases, rearranging the fields can seriously break things. 25 * Adding fields in the beginning or middle can also break things. 26 * Add fields if necessary, to the end of a struct in such a way 27 * that offsets of existing fields do not change. 28 */ 29 30 #include <linux/types.h> 31 #include <asm/sn/types.h> 32 33 #if defined(CONFIG_SGI_IP27) 34 35 #include <asm/sn/sn0/addrs.h> 36 //#include <sys/SN/router.h> 37 // XXX Stolen from <sys/SN/router.h>: 38 #define MAX_ROUTER_PORTS (6) /* Max. number of ports on a router */ 39 #include <asm/sn/fru.h> 40 //#include <sys/graph.h> 41 //#include <sys/xtalk/xbow.h> 42 43 #elif defined(CONFIG_SGI_IP35) 44 45 #include <asm/sn/sn1/addrs.h> 46 #include <sys/sn/router.h> 47 #include <sys/graph.h> 48 #include <asm/xtalk/xbow.h> 49 50 #endif /* !CONFIG_SGI_IP27 && !CONFIG_SGI_IP35 */ 51 52 #if defined(CONFIG_SGI_IP27) || defined(CONFIG_SGI_IP35) 53 #include <asm/sn/agent.h> 54 #include <asm/fw/arc/types.h> 55 #include <asm/fw/arc/hinv.h> 56 #if defined(CONFIG_SGI_IP35) 57 // The hack file has to be before vector and after sn0_fru.... 58 #include <asm/hack.h> 59 #include <asm/sn/vector.h> 60 #include <asm/xtalk/xtalk.h> 61 #endif /* CONFIG_SGI_IP35 */ 62 #endif /* CONFIG_SGI_IP27 || CONFIG_SGI_IP35 */ 63 64 typedef u64 nic_t; 65 66 #define KLCFGINFO_MAGIC 0xbeedbabe 67 68 typedef s32 klconf_off_t; 69 70 /* 71 * Some IMPORTANT OFFSETS. These are the offsets on all NODES. 72 */ 73 #define MAX_MODULE_ID 255 74 #define SIZE_PAD 4096 /* 4k padding for structures */ 75 /* 76 * 1 NODE brd, 2 Router brd (1 8p, 1 meta), 6 Widgets, 77 * 2 Midplanes assuming no pci card cages 78 */ 79 #define MAX_SLOTS_PER_NODE (1 + 2 + 6 + 2) 80 81 /* XXX if each node is guaranteed to have some memory */ 82 83 #define MAX_PCI_DEVS 8 84 85 /* lboard_t->brd_flags fields */ 86 /* All bits in this field are currently used. Try the pad fields if 87 you need more flag bits */ 88 89 #define ENABLE_BOARD 0x01 90 #define FAILED_BOARD 0x02 91 #define DUPLICATE_BOARD 0x04 /* Boards like midplanes/routers which 92 are discovered twice. Use one of them */ 93 #define VISITED_BOARD 0x08 /* Used for compact hub numbering. */ 94 #define LOCAL_MASTER_IO6 0x10 /* master io6 for that node */ 95 #define GLOBAL_MASTER_IO6 0x20 96 #define THIRD_NIC_PRESENT 0x40 /* for future use */ 97 #define SECOND_NIC_PRESENT 0x80 /* addons like MIO are present */ 98 99 /* klinfo->flags fields */ 100 101 #define KLINFO_ENABLE 0x01 /* This component is enabled */ 102 #define KLINFO_FAILED 0x02 /* This component failed */ 103 #define KLINFO_DEVICE 0x04 /* This component is a device */ 104 #define KLINFO_VISITED 0x08 /* This component has been visited */ 105 #define KLINFO_CONTROLLER 0x10 /* This component is a device controller */ 106 #define KLINFO_INSTALL 0x20 /* Install a driver */ 107 #define KLINFO_HEADLESS 0x40 /* Headless (or hubless) component */ 108 #define IS_CONSOLE_IOC3(i) ((((klinfo_t *)i)->flags) & KLINFO_INSTALL) 109 110 #define GB2 0x80000000 111 112 #define MAX_RSV_PTRS 32 113 114 /* Structures to manage various data storage areas */ 115 /* The numbers must be contiguous since the array index i 116 is used in the code to allocate various areas. 117 */ 118 119 #define BOARD_STRUCT 0 120 #define COMPONENT_STRUCT 1 121 #define ERRINFO_STRUCT 2 122 #define KLMALLOC_TYPE_MAX (ERRINFO_STRUCT + 1) 123 #define DEVICE_STRUCT 3 124 125 126 typedef struct console_s { 127 unsigned long uart_base; 128 unsigned long config_base; 129 unsigned long memory_base; 130 short baud; 131 short flag; 132 int type; 133 nasid_t nasid; 134 char wid; 135 char npci; 136 nic_t baseio_nic; 137 } console_t; 138 139 typedef struct klc_malloc_hdr { 140 klconf_off_t km_base; 141 klconf_off_t km_limit; 142 klconf_off_t km_current; 143 } klc_malloc_hdr_t; 144 145 /* Functions/macros needed to use this structure */ 146 147 typedef struct kl_config_hdr { 148 u64 ch_magic; /* set this to KLCFGINFO_MAGIC */ 149 u32 ch_version; /* structure version number */ 150 klconf_off_t ch_malloc_hdr_off; /* offset of ch_malloc_hdr */ 151 klconf_off_t ch_cons_off; /* offset of ch_cons */ 152 klconf_off_t ch_board_info; /* the link list of boards */ 153 console_t ch_cons_info; /* address info of the console */ 154 klc_malloc_hdr_t ch_malloc_hdr[KLMALLOC_TYPE_MAX]; 155 confidence_t ch_sw_belief; /* confidence that software is bad*/ 156 confidence_t ch_sn0net_belief; /* confidence that sn0net is bad */ 157 } kl_config_hdr_t; 158 159 160 #define KL_CONFIG_HDR(_nasid) ((kl_config_hdr_t *)(KLCONFIG_ADDR(_nasid))) 161 #define KL_CONFIG_INFO_OFFSET(_nasid) \ 162 (KL_CONFIG_HDR(_nasid)->ch_board_info) 163 #define KL_CONFIG_INFO_SET_OFFSET(_nasid, _off) \ 164 (KL_CONFIG_HDR(_nasid)->ch_board_info = (_off)) 165 166 #define KL_CONFIG_INFO(_nasid) \ 167 (lboard_t *)((KL_CONFIG_HDR(_nasid)->ch_board_info) ? \ 168 NODE_OFFSET_TO_K1((_nasid), KL_CONFIG_HDR(_nasid)->ch_board_info) : \ 169 0) 170 #define KL_CONFIG_MAGIC(_nasid) (KL_CONFIG_HDR(_nasid)->ch_magic) 171 172 #define KL_CONFIG_CHECK_MAGIC(_nasid) \ 173 (KL_CONFIG_HDR(_nasid)->ch_magic == KLCFGINFO_MAGIC) 174 175 #define KL_CONFIG_HDR_INIT_MAGIC(_nasid) \ 176 (KL_CONFIG_HDR(_nasid)->ch_magic = KLCFGINFO_MAGIC) 177 178 /* --- New Macros for the changed kl_config_hdr_t structure --- */ 179 180 #define PTR_CH_MALLOC_HDR(_k) ((klc_malloc_hdr_t *)\ 181 ((unsigned long)_k + (_k->ch_malloc_hdr_off))) 182 183 #define KL_CONFIG_CH_MALLOC_HDR(_n) PTR_CH_MALLOC_HDR(KL_CONFIG_HDR(_n)) 184 185 #define PTR_CH_CONS_INFO(_k) ((console_t *)\ 186 ((unsigned long)_k + (_k->ch_cons_off))) 187 188 #define KL_CONFIG_CH_CONS_INFO(_n) PTR_CH_CONS_INFO(KL_CONFIG_HDR(_n)) 189 190 /* ------------------------------------------------------------- */ 191 192 #define KL_CONFIG_INFO_START(_nasid) \ 193 (klconf_off_t)(KLCONFIG_OFFSET(_nasid) + sizeof(kl_config_hdr_t)) 194 195 #define KL_CONFIG_BOARD_NASID(_brd) ((_brd)->brd_nasid) 196 #define KL_CONFIG_BOARD_SET_NEXT(_brd, _off) ((_brd)->brd_next = (_off)) 197 198 #define KL_CONFIG_DUPLICATE_BOARD(_brd) ((_brd)->brd_flags & DUPLICATE_BOARD) 199 200 #define XBOW_PORT_TYPE_HUB(_xbowp, _link) \ 201 ((_xbowp)->xbow_port_info[(_link) - BASE_XBOW_PORT].port_flag & XBOW_PORT_HUB) 202 #define XBOW_PORT_TYPE_IO(_xbowp, _link) \ 203 ((_xbowp)->xbow_port_info[(_link) - BASE_XBOW_PORT].port_flag & XBOW_PORT_IO) 204 205 #define XBOW_PORT_IS_ENABLED(_xbowp, _link) \ 206 ((_xbowp)->xbow_port_info[(_link) - BASE_XBOW_PORT].port_flag & XBOW_PORT_ENABLE) 207 #define XBOW_PORT_NASID(_xbowp, _link) \ 208 ((_xbowp)->xbow_port_info[(_link) - BASE_XBOW_PORT].port_nasid) 209 210 #define XBOW_PORT_IO 0x1 211 #define XBOW_PORT_HUB 0x2 212 #define XBOW_PORT_ENABLE 0x4 213 214 #define SN0_PORT_FENCE_SHFT 0 215 #define SN0_PORT_FENCE_MASK (1 << SN0_PORT_FENCE_SHFT) 216 217 /* 218 * The KLCONFIG area is organized as a LINKED LIST of BOARDs. A BOARD 219 * can be either 'LOCAL' or 'REMOTE'. LOCAL means it is attached to 220 * the LOCAL/current NODE. REMOTE means it is attached to a different 221 * node.(TBD - Need a way to treat ROUTER boards.) 222 * 223 * There are 2 different structures to represent these boards - 224 * lboard - Local board, rboard - remote board. These 2 structures 225 * can be arbitrarily mixed in the LINKED LIST of BOARDs. (Refer 226 * Figure below). The first byte of the rboard or lboard structure 227 * is used to find out its type - no unions are used. 228 * If it is a lboard, then the config info of this board will be found 229 * on the local node. (LOCAL NODE BASE + offset value gives pointer to 230 * the structure. 231 * If it is a rboard, the local structure contains the node number 232 * and the offset of the beginning of the LINKED LIST on the remote node. 233 * The details of the hardware on a remote node can be built locally, 234 * if required, by reading the LINKED LIST on the remote node and 235 * ignoring all the rboards on that node. 236 * 237 * The local node uses the REMOTE NODE NUMBER + OFFSET to point to the 238 * First board info on the remote node. The remote node list is 239 * traversed as the local list, using the REMOTE BASE ADDRESS and not 240 * the local base address and ignoring all rboard values. 241 * 242 * 243 KLCONFIG 244 245 +------------+ +------------+ +------------+ +------------+ 246 | lboard | +-->| lboard | +-->| rboard | +-->| lboard | 247 +------------+ | +------------+ | +------------+ | +------------+ 248 | board info | | | board info | | |errinfo,bptr| | | board info | 249 +------------+ | +------------+ | +------------+ | +------------+ 250 | offset |--+ | offset |--+ | offset |--+ |offset=NULL | 251 +------------+ +------------+ +------------+ +------------+ 252 253 254 +------------+ 255 | board info | 256 +------------+ +--------------------------------+ 257 | compt 1 |------>| type, rev, diaginfo, size ... | (CPU) 258 +------------+ +--------------------------------+ 259 | compt 2 |--+ 260 +------------+ | +--------------------------------+ 261 | ... | +--->| type, rev, diaginfo, size ... | (MEM_BANK) 262 +------------+ +--------------------------------+ 263 | errinfo |--+ 264 +------------+ | +--------------------------------+ 265 +--->|r/l brd errinfo,compt err flags | 266 +--------------------------------+ 267 268 * 269 * Each BOARD consists of COMPONENTs and the BOARD structure has 270 * pointers (offsets) to its COMPONENT structure. 271 * The COMPONENT structure has version info, size and speed info, revision, 272 * error info and the NIC info. This structure can accommodate any 273 * BOARD with arbitrary COMPONENT composition. 274 * 275 * The ERRORINFO part of each BOARD has error information 276 * that describes errors about the BOARD itself. It also has flags to 277 * indicate the COMPONENT(s) on the board that have errors. The error 278 * information specific to the COMPONENT is present in the respective 279 * COMPONENT structure. 280 * 281 * The ERRORINFO structure is also treated like a COMPONENT, ie. the 282 * BOARD has pointers(offset) to the ERRORINFO structure. The rboard 283 * structure also has a pointer to the ERRORINFO structure. This is 284 * the place to store ERRORINFO about a REMOTE NODE, if the HUB on 285 * that NODE is not working or if the REMOTE MEMORY is BAD. In cases where 286 * only the CPU of the REMOTE NODE is disabled, the ERRORINFO pointer can 287 * be a NODE NUMBER, REMOTE OFFSET combination, pointing to error info 288 * which is present on the REMOTE NODE.(TBD) 289 * REMOTE ERRINFO can be stored on any of the nearest nodes 290 * or on all the nearest nodes.(TBD) 291 * Like BOARD structures, REMOTE ERRINFO structures can be built locally 292 * using the rboard errinfo pointer. 293 * 294 * In order to get useful information from this Data organization, a set of 295 * interface routines are provided (TBD). The important thing to remember while 296 * manipulating the structures, is that, the NODE number information should 297 * be used. If the NODE is non-zero (remote) then each offset should 298 * be added to the REMOTE BASE ADDR else it should be added to the LOCAL BASE ADDR. 299 * This includes offsets for BOARDS, COMPONENTS and ERRORINFO. 300 * 301 * Note that these structures do not provide much info about connectivity. 302 * That info will be part of HWGRAPH, which is an extension of the cfg_t 303 * data structure. (ref IP27prom/cfg.h) It has to be extended to include 304 * the IO part of the Network(TBD). 305 * 306 * The data structures below define the above concepts. 307 */ 308 309 /* 310 * Values for CPU types 311 */ 312 #define KL_CPU_R4000 0x1 /* Standard R4000 */ 313 #define KL_CPU_TFP 0x2 /* TFP processor */ 314 #define KL_CPU_R10000 0x3 /* R10000 (T5) */ 315 #define KL_CPU_NONE (-1) /* no cpu present in slot */ 316 317 /* 318 * IP27 BOARD classes 319 */ 320 321 #define KLCLASS_MASK 0xf0 322 #define KLCLASS_NONE 0x00 323 #define KLCLASS_NODE 0x10 /* CPU, Memory and HUB board */ 324 #define KLCLASS_CPU KLCLASS_NODE 325 #define KLCLASS_IO 0x20 /* BaseIO, 4 ch SCSI, ethernet, FDDI 326 and the non-graphics widget boards */ 327 #define KLCLASS_ROUTER 0x30 /* Router board */ 328 #define KLCLASS_MIDPLANE 0x40 /* We need to treat this as a board 329 so that we can record error info */ 330 #define KLCLASS_GFX 0x50 /* graphics boards */ 331 332 #define KLCLASS_PSEUDO_GFX 0x60 /* HDTV type cards that use a gfx 333 * hw ifc to xtalk and are not gfx 334 * class for sw purposes */ 335 336 #define KLCLASS_MAX 7 /* Bump this if a new CLASS is added */ 337 #define KLTYPE_MAX 10 /* Bump this if a new CLASS is added */ 338 339 #define KLCLASS_UNKNOWN 0xf0 340 341 #define KLCLASS(_x) ((_x) & KLCLASS_MASK) 342 343 /* 344 * IP27 board types 345 */ 346 347 #define KLTYPE_MASK 0x0f 348 #define KLTYPE_NONE 0x00 349 #define KLTYPE_EMPTY 0x00 350 351 #define KLTYPE_WEIRDCPU (KLCLASS_CPU | 0x0) 352 #define KLTYPE_IP27 (KLCLASS_CPU | 0x1) /* 2 CPUs(R10K) per board */ 353 354 #define KLTYPE_WEIRDIO (KLCLASS_IO | 0x0) 355 #define KLTYPE_BASEIO (KLCLASS_IO | 0x1) /* IOC3, SuperIO, Bridge, SCSI */ 356 #define KLTYPE_IO6 KLTYPE_BASEIO /* Additional name */ 357 #define KLTYPE_4CHSCSI (KLCLASS_IO | 0x2) 358 #define KLTYPE_MSCSI KLTYPE_4CHSCSI /* Additional name */ 359 #define KLTYPE_ETHERNET (KLCLASS_IO | 0x3) 360 #define KLTYPE_MENET KLTYPE_ETHERNET /* Additional name */ 361 #define KLTYPE_FDDI (KLCLASS_IO | 0x4) 362 #define KLTYPE_UNUSED (KLCLASS_IO | 0x5) /* XXX UNUSED */ 363 #define KLTYPE_HAROLD (KLCLASS_IO | 0x6) /* PCI SHOE BOX */ 364 #define KLTYPE_PCI KLTYPE_HAROLD 365 #define KLTYPE_VME (KLCLASS_IO | 0x7) /* Any 3rd party VME card */ 366 #define KLTYPE_MIO (KLCLASS_IO | 0x8) 367 #define KLTYPE_FC (KLCLASS_IO | 0x9) 368 #define KLTYPE_LINC (KLCLASS_IO | 0xA) 369 #define KLTYPE_TPU (KLCLASS_IO | 0xB) /* Tensor Processing Unit */ 370 #define KLTYPE_GSN_A (KLCLASS_IO | 0xC) /* Main GSN board */ 371 #define KLTYPE_GSN_B (KLCLASS_IO | 0xD) /* Auxiliary GSN board */ 372 373 #define KLTYPE_GFX (KLCLASS_GFX | 0x0) /* unknown graphics type */ 374 #define KLTYPE_GFX_KONA (KLCLASS_GFX | 0x1) /* KONA graphics on IP27 */ 375 #define KLTYPE_GFX_MGRA (KLCLASS_GFX | 0x3) /* MGRAS graphics on IP27 */ 376 377 #define KLTYPE_WEIRDROUTER (KLCLASS_ROUTER | 0x0) 378 #define KLTYPE_ROUTER (KLCLASS_ROUTER | 0x1) 379 #define KLTYPE_ROUTER2 KLTYPE_ROUTER /* Obsolete! */ 380 #define KLTYPE_NULL_ROUTER (KLCLASS_ROUTER | 0x2) 381 #define KLTYPE_META_ROUTER (KLCLASS_ROUTER | 0x3) 382 383 #define KLTYPE_WEIRDMIDPLANE (KLCLASS_MIDPLANE | 0x0) 384 #define KLTYPE_MIDPLANE8 (KLCLASS_MIDPLANE | 0x1) /* 8 slot backplane */ 385 #define KLTYPE_MIDPLANE KLTYPE_MIDPLANE8 386 #define KLTYPE_PBRICK_XBOW (KLCLASS_MIDPLANE | 0x2) 387 388 #define KLTYPE_IOBRICK (KLCLASS_IOBRICK | 0x0) 389 #define KLTYPE_IBRICK (KLCLASS_IOBRICK | 0x1) 390 #define KLTYPE_PBRICK (KLCLASS_IOBRICK | 0x2) 391 #define KLTYPE_XBRICK (KLCLASS_IOBRICK | 0x3) 392 393 #define KLTYPE_PBRICK_BRIDGE KLTYPE_PBRICK 394 395 /* The value of type should be more than 8 so that hinv prints 396 * out the board name from the NIC string. For values less than 397 * 8 the name of the board needs to be hard coded in a few places. 398 * When bringup started nic names had not standardized and so we 399 * had to hard code. (For people interested in history.) 400 */ 401 #define KLTYPE_XTHD (KLCLASS_PSEUDO_GFX | 0x9) 402 403 #define KLTYPE_UNKNOWN (KLCLASS_UNKNOWN | 0xf) 404 405 #define KLTYPE(_x) ((_x) & KLTYPE_MASK) 406 #define IS_MIO_PRESENT(l) ((l->brd_type == KLTYPE_BASEIO) && \ 407 (l->brd_flags & SECOND_NIC_PRESENT)) 408 #define IS_MIO_IOC3(l, n) (IS_MIO_PRESENT(l) && (n > 2)) 409 410 /* 411 * board structures 412 */ 413 414 #define MAX_COMPTS_PER_BRD 24 415 416 #define LOCAL_BOARD 1 417 #define REMOTE_BOARD 2 418 419 #define LBOARD_STRUCT_VERSION 2 420 421 typedef struct lboard_s { 422 klconf_off_t brd_next; /* Next BOARD */ 423 unsigned char struct_type; /* type of structure, local or remote */ 424 unsigned char brd_type; /* type+class */ 425 unsigned char brd_sversion; /* version of this structure */ 426 unsigned char brd_brevision; /* board revision */ 427 unsigned char brd_promver; /* board prom version, if any */ 428 unsigned char brd_flags; /* Enabled, Disabled etc */ 429 unsigned char brd_slot; /* slot number */ 430 unsigned short brd_debugsw; /* Debug switches */ 431 moduleid_t brd_module; /* module to which it belongs */ 432 partid_t brd_partition; /* Partition number */ 433 unsigned short brd_diagval; /* diagnostic value */ 434 unsigned short brd_diagparm; /* diagnostic parameter */ 435 unsigned char brd_inventory; /* inventory history */ 436 unsigned char brd_numcompts; /* Number of components */ 437 nic_t brd_nic; /* Number in CAN */ 438 nasid_t brd_nasid; /* passed parameter */ 439 klconf_off_t brd_compts[MAX_COMPTS_PER_BRD]; /* pointers to COMPONENTS */ 440 klconf_off_t brd_errinfo; /* Board's error information */ 441 struct lboard_s *brd_parent; /* Logical parent for this brd */ 442 vertex_hdl_t brd_graph_link; /* vertex hdl to connect extern compts */ 443 confidence_t brd_confidence; /* confidence that the board is bad */ 444 nasid_t brd_owner; /* who owns this board */ 445 unsigned char brd_nic_flags; /* To handle 8 more NICs */ 446 char brd_name[32]; 447 } lboard_t; 448 449 450 /* 451 * Make sure we pass back the calias space address for local boards. 452 * klconfig board traversal and error structure extraction defines. 453 */ 454 455 #define BOARD_SLOT(_brd) ((_brd)->brd_slot) 456 457 #define KLCF_CLASS(_brd) KLCLASS((_brd)->brd_type) 458 #define KLCF_TYPE(_brd) KLTYPE((_brd)->brd_type) 459 #define KLCF_REMOTE(_brd) (((_brd)->struct_type & LOCAL_BOARD) ? 0 : 1) 460 #define KLCF_NUM_COMPS(_brd) ((_brd)->brd_numcompts) 461 #define KLCF_MODULE_ID(_brd) ((_brd)->brd_module) 462 463 #define KLCF_NEXT(_brd) \ 464 ((_brd)->brd_next ? \ 465 (lboard_t *)(NODE_OFFSET_TO_K1(NASID_GET(_brd), (_brd)->brd_next)):\ 466 NULL) 467 #define KLCF_COMP(_brd, _ndx) \ 468 (klinfo_t *)(NODE_OFFSET_TO_K1(NASID_GET(_brd), \ 469 (_brd)->brd_compts[(_ndx)])) 470 471 #define KLCF_COMP_ERROR(_brd, _comp) \ 472 (NODE_OFFSET_TO_K1(NASID_GET(_brd), (_comp)->errinfo)) 473 474 #define KLCF_COMP_TYPE(_comp) ((_comp)->struct_type) 475 #define KLCF_BRIDGE_W_ID(_comp) ((_comp)->physid) /* Widget ID */ 476 477 478 479 /* 480 * Generic info structure. This stores common info about a 481 * component. 482 */ 483 484 typedef struct klinfo_s { /* Generic info */ 485 unsigned char struct_type; /* type of this structure */ 486 unsigned char struct_version; /* version of this structure */ 487 unsigned char flags; /* Enabled, disabled etc */ 488 unsigned char revision; /* component revision */ 489 unsigned short diagval; /* result of diagnostics */ 490 unsigned short diagparm; /* diagnostic parameter */ 491 unsigned char inventory; /* previous inventory status */ 492 nic_t nic; /* MUst be aligned properly */ 493 unsigned char physid; /* physical id of component */ 494 unsigned int virtid; /* virtual id as seen by system */ 495 unsigned char widid; /* Widget id - if applicable */ 496 nasid_t nasid; /* node number - from parent */ 497 char pad1; /* pad out structure. */ 498 char pad2; /* pad out structure. */ 499 COMPONENT *arcs_compt; /* ptr to the arcs struct for ease*/ 500 klconf_off_t errinfo; /* component specific errors */ 501 unsigned short pad3; /* pci fields have moved over to */ 502 unsigned short pad4; /* klbri_t */ 503 } klinfo_t ; 504 505 #define KLCONFIG_INFO_ENABLED(_i) ((_i)->flags & KLINFO_ENABLE) 506 /* 507 * Component structures. 508 * Following are the currently identified components: 509 * CPU, HUB, MEM_BANK, 510 * XBOW(consists of 16 WIDGETs, each of which can be HUB or GRAPHICS or BRIDGE) 511 * BRIDGE, IOC3, SuperIO, SCSI, FDDI 512 * ROUTER 513 * GRAPHICS 514 */ 515 #define KLSTRUCT_UNKNOWN 0 516 #define KLSTRUCT_CPU 1 517 #define KLSTRUCT_HUB 2 518 #define KLSTRUCT_MEMBNK 3 519 #define KLSTRUCT_XBOW 4 520 #define KLSTRUCT_BRI 5 521 #define KLSTRUCT_IOC3 6 522 #define KLSTRUCT_PCI 7 523 #define KLSTRUCT_VME 8 524 #define KLSTRUCT_ROU 9 525 #define KLSTRUCT_GFX 10 526 #define KLSTRUCT_SCSI 11 527 #define KLSTRUCT_FDDI 12 528 #define KLSTRUCT_MIO 13 529 #define KLSTRUCT_DISK 14 530 #define KLSTRUCT_TAPE 15 531 #define KLSTRUCT_CDROM 16 532 #define KLSTRUCT_HUB_UART 17 533 #define KLSTRUCT_IOC3ENET 18 534 #define KLSTRUCT_IOC3UART 19 535 #define KLSTRUCT_UNUSED 20 /* XXX UNUSED */ 536 #define KLSTRUCT_IOC3PCKM 21 537 #define KLSTRUCT_RAD 22 538 #define KLSTRUCT_HUB_TTY 23 539 #define KLSTRUCT_IOC3_TTY 24 540 541 /* Early Access IO proms are compatible 542 only with KLSTRUCT values up to 24. */ 543 544 #define KLSTRUCT_FIBERCHANNEL 25 545 #define KLSTRUCT_MOD_SERIAL_NUM 26 546 #define KLSTRUCT_IOC3MS 27 547 #define KLSTRUCT_TPU 28 548 #define KLSTRUCT_GSN_A 29 549 #define KLSTRUCT_GSN_B 30 550 #define KLSTRUCT_XTHD 31 551 552 /* 553 * These are the indices of various components within a lboard structure. 554 */ 555 556 #define IP27_CPU0_INDEX 0 557 #define IP27_CPU1_INDEX 1 558 #define IP27_HUB_INDEX 2 559 #define IP27_MEM_INDEX 3 560 561 #define BASEIO_BRIDGE_INDEX 0 562 #define BASEIO_IOC3_INDEX 1 563 #define BASEIO_SCSI1_INDEX 2 564 #define BASEIO_SCSI2_INDEX 3 565 566 #define MIDPLANE_XBOW_INDEX 0 567 #define ROUTER_COMPONENT_INDEX 0 568 569 #define CH4SCSI_BRIDGE_INDEX 0 570 571 /* Info holders for various hardware components */ 572 573 typedef u64 *pci_t; 574 typedef u64 *vmeb_t; 575 typedef u64 *vmed_t; 576 typedef u64 *fddi_t; 577 typedef u64 *scsi_t; 578 typedef u64 *mio_t; 579 typedef u64 *graphics_t; 580 typedef u64 *router_t; 581 582 /* 583 * The port info in ip27_cfg area translates to a lboart_t in the 584 * KLCONFIG area. But since KLCONFIG does not use pointers, lboart_t 585 * is stored in terms of a nasid and a offset from start of KLCONFIG 586 * area on that nasid. 587 */ 588 typedef struct klport_s { 589 nasid_t port_nasid; 590 unsigned char port_flag; 591 klconf_off_t port_offset; 592 } klport_t; 593 594 typedef struct klcpu_s { /* CPU */ 595 klinfo_t cpu_info; 596 unsigned short cpu_prid; /* Processor PRID value */ 597 unsigned short cpu_fpirr; /* FPU IRR value */ 598 unsigned short cpu_speed; /* Speed in MHZ */ 599 unsigned short cpu_scachesz; /* secondary cache size in MB */ 600 unsigned short cpu_scachespeed;/* secondary cache speed in MHz */ 601 } klcpu_t ; 602 603 #define CPU_STRUCT_VERSION 2 604 605 typedef struct klhub_s { /* HUB */ 606 klinfo_t hub_info; 607 unsigned int hub_flags; /* PCFG_HUB_xxx flags */ 608 klport_t hub_port; /* hub is connected to this */ 609 nic_t hub_box_nic; /* nic of containing box */ 610 klconf_off_t hub_mfg_nic; /* MFG NIC string */ 611 u64 hub_speed; /* Speed of hub in HZ */ 612 } klhub_t ; 613 614 typedef struct klhub_uart_s { /* HUB */ 615 klinfo_t hubuart_info; 616 unsigned int hubuart_flags; /* PCFG_HUB_xxx flags */ 617 nic_t hubuart_box_nic; /* nic of containing box */ 618 } klhub_uart_t ; 619 620 #define MEMORY_STRUCT_VERSION 2 621 622 typedef struct klmembnk_s { /* MEMORY BANK */ 623 klinfo_t membnk_info; 624 short membnk_memsz; /* Total memory in megabytes */ 625 short membnk_dimm_select; /* bank to physical addr mapping*/ 626 short membnk_bnksz[MD_MEM_BANKS]; /* Memory bank sizes */ 627 short membnk_attr; 628 } klmembnk_t ; 629 630 #define KLCONFIG_MEMBNK_SIZE(_info, _bank) \ 631 ((_info)->membnk_bnksz[(_bank)]) 632 633 634 #define MEMBNK_PREMIUM 1 635 #define KLCONFIG_MEMBNK_PREMIUM(_info, _bank) \ 636 ((_info)->membnk_attr & (MEMBNK_PREMIUM << (_bank))) 637 638 #define MAX_SERIAL_NUM_SIZE 10 639 640 typedef struct klmod_serial_num_s { 641 klinfo_t snum_info; 642 union { 643 char snum_str[MAX_SERIAL_NUM_SIZE]; 644 unsigned long long snum_int; 645 } snum; 646 } klmod_serial_num_t; 647 648 /* Macros needed to access serial number structure in lboard_t. 649 Hard coded values are necessary since we cannot treat 650 serial number struct as a component without losing compatibility 651 between prom versions. */ 652 653 #define GET_SNUM_COMP(_l) ((klmod_serial_num_t *)\ 654 KLCF_COMP(_l, _l->brd_numcompts)) 655 656 #define MAX_XBOW_LINKS 16 657 658 typedef struct klxbow_s { /* XBOW */ 659 klinfo_t xbow_info ; 660 klport_t xbow_port_info[MAX_XBOW_LINKS] ; /* Module number */ 661 int xbow_master_hub_link; 662 /* type of brd connected+component struct ptr+flags */ 663 } klxbow_t ; 664 665 #define MAX_PCI_SLOTS 8 666 667 typedef struct klpci_device_s { 668 s32 pci_device_id; /* 32 bits of vendor/device ID. */ 669 s32 pci_device_pad; /* 32 bits of padding. */ 670 } klpci_device_t; 671 672 #define BRIDGE_STRUCT_VERSION 2 673 674 typedef struct klbri_s { /* BRIDGE */ 675 klinfo_t bri_info ; 676 unsigned char bri_eprominfo ; /* IO6prom connected to bridge */ 677 unsigned char bri_bustype ; /* PCI/VME BUS bridge/GIO */ 678 pci_t pci_specific ; /* PCI Board config info */ 679 klpci_device_t bri_devices[MAX_PCI_DEVS] ; /* PCI IDs */ 680 klconf_off_t bri_mfg_nic ; 681 } klbri_t ; 682 683 #define MAX_IOC3_TTY 2 684 685 typedef struct klioc3_s { /* IOC3 */ 686 klinfo_t ioc3_info ; 687 unsigned char ioc3_ssram ; /* Info about ssram */ 688 unsigned char ioc3_nvram ; /* Info about nvram */ 689 klinfo_t ioc3_superio ; /* Info about superio */ 690 klconf_off_t ioc3_tty_off ; 691 klinfo_t ioc3_enet ; 692 klconf_off_t ioc3_enet_off ; 693 klconf_off_t ioc3_kbd_off ; 694 } klioc3_t ; 695 696 #define MAX_VME_SLOTS 8 697 698 typedef struct klvmeb_s { /* VME BRIDGE - PCI CTLR */ 699 klinfo_t vmeb_info ; 700 vmeb_t vmeb_specific ; 701 klconf_off_t vmeb_brdinfo[MAX_VME_SLOTS] ; /* VME Board config info */ 702 } klvmeb_t ; 703 704 typedef struct klvmed_s { /* VME DEVICE - VME BOARD */ 705 klinfo_t vmed_info ; 706 vmed_t vmed_specific ; 707 klconf_off_t vmed_brdinfo[MAX_VME_SLOTS] ; /* VME Board config info */ 708 } klvmed_t ; 709 710 #define ROUTER_VECTOR_VERS 2 711 712 /* XXX - Don't we need the number of ports here?!? */ 713 typedef struct klrou_s { /* ROUTER */ 714 klinfo_t rou_info ; 715 unsigned int rou_flags ; /* PCFG_ROUTER_xxx flags */ 716 nic_t rou_box_nic ; /* nic of the containing module */ 717 klport_t rou_port[MAX_ROUTER_PORTS + 1] ; /* array index 1 to 6 */ 718 klconf_off_t rou_mfg_nic ; /* MFG NIC string */ 719 u64 rou_vector; /* vector from master node */ 720 } klrou_t ; 721 722 /* 723 * Graphics Controller/Device 724 * 725 * (IP27/IO6) Prom versions 6.13 (and 6.5.1 kernels) and earlier 726 * used a couple different structures to store graphics information. 727 * For compatibility reasons, the newer data structure preserves some 728 * of the layout so that fields that are used in the old versions remain 729 * in the same place (with the same info). Determination of what version 730 * of this structure we have is done by checking the cookie field. 731 */ 732 #define KLGFX_COOKIE 0x0c0de000 733 734 typedef struct klgfx_s { /* GRAPHICS Device */ 735 klinfo_t gfx_info; 736 klconf_off_t old_gndevs; /* for compatibility with older proms */ 737 klconf_off_t old_gdoff0; /* for compatibility with older proms */ 738 unsigned int cookie; /* for compatibility with older proms */ 739 unsigned int moduleslot; 740 struct klgfx_s *gfx_next_pipe; 741 graphics_t gfx_specific; 742 klconf_off_t pad0; /* for compatibility with older proms */ 743 klconf_off_t gfx_mfg_nic; 744 } klgfx_t; 745 746 typedef struct klxthd_s { 747 klinfo_t xthd_info ; 748 klconf_off_t xthd_mfg_nic ; /* MFG NIC string */ 749 } klxthd_t ; 750 751 typedef struct kltpu_s { /* TPU board */ 752 klinfo_t tpu_info ; 753 klconf_off_t tpu_mfg_nic ; /* MFG NIC string */ 754 } kltpu_t ; 755 756 typedef struct klgsn_s { /* GSN board */ 757 klinfo_t gsn_info ; 758 klconf_off_t gsn_mfg_nic ; /* MFG NIC string */ 759 } klgsn_t ; 760 761 #define MAX_SCSI_DEVS 16 762 763 /* 764 * NOTE: THis is the max sized kl* structure and is used in klmalloc.c 765 * to allocate space of type COMPONENT. Make sure that if the size of 766 * any other component struct becomes more than this, then redefine 767 * that as the size to be klmalloced. 768 */ 769 770 typedef struct klscsi_s { /* SCSI Controller */ 771 klinfo_t scsi_info ; 772 scsi_t scsi_specific ; 773 unsigned char scsi_numdevs ; 774 klconf_off_t scsi_devinfo[MAX_SCSI_DEVS] ; 775 } klscsi_t ; 776 777 typedef struct klscdev_s { /* SCSI device */ 778 klinfo_t scdev_info ; 779 struct scsidisk_data *scdev_cfg ; /* driver fills up this */ 780 } klscdev_t ; 781 782 typedef struct klttydev_s { /* TTY device */ 783 klinfo_t ttydev_info ; 784 struct terminal_data *ttydev_cfg ; /* driver fills up this */ 785 } klttydev_t ; 786 787 typedef struct klenetdev_s { /* ENET device */ 788 klinfo_t enetdev_info ; 789 struct net_data *enetdev_cfg ; /* driver fills up this */ 790 } klenetdev_t ; 791 792 typedef struct klkbddev_s { /* KBD device */ 793 klinfo_t kbddev_info ; 794 struct keyboard_data *kbddev_cfg ; /* driver fills up this */ 795 } klkbddev_t ; 796 797 typedef struct klmsdev_s { /* mouse device */ 798 klinfo_t msdev_info ; 799 void *msdev_cfg ; 800 } klmsdev_t ; 801 802 #define MAX_FDDI_DEVS 10 /* XXX Is this true */ 803 804 typedef struct klfddi_s { /* FDDI */ 805 klinfo_t fddi_info ; 806 fddi_t fddi_specific ; 807 klconf_off_t fddi_devinfo[MAX_FDDI_DEVS] ; 808 } klfddi_t ; 809 810 typedef struct klmio_s { /* MIO */ 811 klinfo_t mio_info ; 812 mio_t mio_specific ; 813 } klmio_t ; 814 815 816 typedef union klcomp_s { 817 klcpu_t kc_cpu; 818 klhub_t kc_hub; 819 klmembnk_t kc_mem; 820 klxbow_t kc_xbow; 821 klbri_t kc_bri; 822 klioc3_t kc_ioc3; 823 klvmeb_t kc_vmeb; 824 klvmed_t kc_vmed; 825 klrou_t kc_rou; 826 klgfx_t kc_gfx; 827 klscsi_t kc_scsi; 828 klscdev_t kc_scsi_dev; 829 klfddi_t kc_fddi; 830 klmio_t kc_mio; 831 klmod_serial_num_t kc_snum ; 832 } klcomp_t; 833 834 typedef union kldev_s { /* for device structure allocation */ 835 klscdev_t kc_scsi_dev ; 836 klttydev_t kc_tty_dev ; 837 klenetdev_t kc_enet_dev ; 838 klkbddev_t kc_kbd_dev ; 839 } kldev_t ; 840 841 /* Data structure interface routines. TBD */ 842 843 /* Include launch info in this file itself? TBD */ 844 845 /* 846 * TBD - Can the ARCS and device driver related info also be included in the 847 * KLCONFIG area. On the IO4PROM, prom device driver info is part of cfgnode_t 848 * structure, viz private to the IO4prom. 849 */ 850 851 /* 852 * TBD - Allocation issues. 853 * 854 * Do we need to Mark off sepatate heaps for lboard_t, rboard_t, component, 855 * errinfo and allocate from them, or have a single heap and allocate all 856 * structures from it. Debug is easier in the former method since we can 857 * dump all similar structs in one command, but there will be lots of holes, 858 * in memory and max limits are needed for number of structures. 859 * Another way to make it organized, is to have a union of all components 860 * and allocate a aligned chunk of memory greater than the biggest 861 * component. 862 */ 863 864 typedef union { 865 lboard_t *lbinfo ; 866 } biptr_t ; 867 868 869 #define BRI_PER_XBOW 6 870 #define PCI_PER_BRI 8 871 #define DEV_PER_PCI 16 872 873 874 /* Virtual dipswitch values (starting from switch "7"): */ 875 876 #define VDS_NOGFX 0x8000 /* Don't enable gfx and autoboot */ 877 #define VDS_NOMP 0x100 /* Don't start slave processors */ 878 #define VDS_MANUMODE 0x80 /* Manufacturing mode */ 879 #define VDS_NOARB 0x40 /* No bootmaster arbitration */ 880 #define VDS_PODMODE 0x20 /* Go straight to POD mode */ 881 #define VDS_NO_DIAGS 0x10 /* Don't run any diags after BM arb */ 882 #define VDS_DEFAULTS 0x08 /* Use default environment values */ 883 #define VDS_NOMEMCLEAR 0x04 /* Don't run mem cfg code */ 884 #define VDS_2ND_IO4 0x02 /* Boot from the second IO4 */ 885 #define VDS_DEBUG_PROM 0x01 /* Print PROM debugging messages */ 886 887 /* external declarations of Linux kernel functions. */ 888 889 extern lboard_t *find_lboard(lboard_t *start, unsigned char type); 890 extern klinfo_t *find_component(lboard_t *brd, klinfo_t *kli, unsigned char type); 891 extern klinfo_t *find_first_component(lboard_t *brd, unsigned char type); 892 extern lboard_t *find_lboard_class(lboard_t *start, unsigned char brd_class); 893 894 #endif /* _ASM_SN_KLCONFIG_H */ 895
