1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /* Copyright (C) 2007,2008 Freescale Semiconductor, Inc. */
3
4 #include <linux/usb/otg-fsm.h>
5 #include <linux/usb/otg.h>
6 #include <linux/ioctl.h>
7
8 /* USB Command Register Bit Masks */
9 #define USB_CMD_RUN_STOP (0x1<<0)
10 #define USB_CMD_CTRL_RESET (0x1<<1)
11 #define USB_CMD_PERIODIC_SCHEDULE_EN (0x1<<4)
12 #define USB_CMD_ASYNC_SCHEDULE_EN (0x1<<5)
13 #define USB_CMD_INT_AA_DOORBELL (0x1<<6)
14 #define USB_CMD_ASP (0x3<<8)
15 #define USB_CMD_ASYNC_SCH_PARK_EN (0x1<<11)
16 #define USB_CMD_SUTW (0x1<<13)
17 #define USB_CMD_ATDTW (0x1<<14)
18 #define USB_CMD_ITC (0xFF<<16)
19
20 /* bit 15,3,2 are frame list size */
21 #define USB_CMD_FRAME_SIZE_1024 (0x0<<15 | 0x0<<2)
22 #define USB_CMD_FRAME_SIZE_512 (0x0<<15 | 0x1<<2)
23 #define USB_CMD_FRAME_SIZE_256 (0x0<<15 | 0x2<<2)
24 #define USB_CMD_FRAME_SIZE_128 (0x0<<15 | 0x3<<2)
25 #define USB_CMD_FRAME_SIZE_64 (0x1<<15 | 0x0<<2)
26 #define USB_CMD_FRAME_SIZE_32 (0x1<<15 | 0x1<<2)
27 #define USB_CMD_FRAME_SIZE_16 (0x1<<15 | 0x2<<2)
28 #define USB_CMD_FRAME_SIZE_8 (0x1<<15 | 0x3<<2)
29
30 /* bit 9-8 are async schedule park mode count */
31 #define USB_CMD_ASP_00 (0x0<<8)
32 #define USB_CMD_ASP_01 (0x1<<8)
33 #define USB_CMD_ASP_10 (0x2<<8)
34 #define USB_CMD_ASP_11 (0x3<<8)
35 #define USB_CMD_ASP_BIT_POS (8)
36
37 /* bit 23-16 are interrupt threshold control */
38 #define USB_CMD_ITC_NO_THRESHOLD (0x00<<16)
39 #define USB_CMD_ITC_1_MICRO_FRM (0x01<<16)
40 #define USB_CMD_ITC_2_MICRO_FRM (0x02<<16)
41 #define USB_CMD_ITC_4_MICRO_FRM (0x04<<16)
42 #define USB_CMD_ITC_8_MICRO_FRM (0x08<<16)
43 #define USB_CMD_ITC_16_MICRO_FRM (0x10<<16)
44 #define USB_CMD_ITC_32_MICRO_FRM (0x20<<16)
45 #define USB_CMD_ITC_64_MICRO_FRM (0x40<<16)
46 #define USB_CMD_ITC_BIT_POS (16)
47
48 /* USB Status Register Bit Masks */
49 #define USB_STS_INT (0x1<<0)
50 #define USB_STS_ERR (0x1<<1)
51 #define USB_STS_PORT_CHANGE (0x1<<2)
52 #define USB_STS_FRM_LST_ROLL (0x1<<3)
53 #define USB_STS_SYS_ERR (0x1<<4)
54 #define USB_STS_IAA (0x1<<5)
55 #define USB_STS_RESET_RECEIVED (0x1<<6)
56 #define USB_STS_SOF (0x1<<7)
57 #define USB_STS_DCSUSPEND (0x1<<8)
58 #define USB_STS_HC_HALTED (0x1<<12)
59 #define USB_STS_RCL (0x1<<13)
60 #define USB_STS_PERIODIC_SCHEDULE (0x1<<14)
61 #define USB_STS_ASYNC_SCHEDULE (0x1<<15)
62
63 /* USB Interrupt Enable Register Bit Masks */
64 #define USB_INTR_INT_EN (0x1<<0)
65 #define USB_INTR_ERR_INT_EN (0x1<<1)
66 #define USB_INTR_PC_DETECT_EN (0x1<<2)
67 #define USB_INTR_FRM_LST_ROLL_EN (0x1<<3)
68 #define USB_INTR_SYS_ERR_EN (0x1<<4)
69 #define USB_INTR_ASYN_ADV_EN (0x1<<5)
70 #define USB_INTR_RESET_EN (0x1<<6)
71 #define USB_INTR_SOF_EN (0x1<<7)
72 #define USB_INTR_DEVICE_SUSPEND (0x1<<8)
73
74 /* Device Address bit masks */
75 #define USB_DEVICE_ADDRESS_MASK (0x7F<<25)
76 #define USB_DEVICE_ADDRESS_BIT_POS (25)
77 /* PORTSC Register Bit Masks,Only one PORT in OTG mode*/
78 #define PORTSC_CURRENT_CONNECT_STATUS (0x1<<0)
79 #define PORTSC_CONNECT_STATUS_CHANGE (0x1<<1)
80 #define PORTSC_PORT_ENABLE (0x1<<2)
81 #define PORTSC_PORT_EN_DIS_CHANGE (0x1<<3)
82 #define PORTSC_OVER_CURRENT_ACT (0x1<<4)
83 #define PORTSC_OVER_CUURENT_CHG (0x1<<5)
84 #define PORTSC_PORT_FORCE_RESUME (0x1<<6)
85 #define PORTSC_PORT_SUSPEND (0x1<<7)
86 #define PORTSC_PORT_RESET (0x1<<8)
87 #define PORTSC_LINE_STATUS_BITS (0x3<<10)
88 #define PORTSC_PORT_POWER (0x1<<12)
89 #define PORTSC_PORT_INDICTOR_CTRL (0x3<<14)
90 #define PORTSC_PORT_TEST_CTRL (0xF<<16)
91 #define PORTSC_WAKE_ON_CONNECT_EN (0x1<<20)
92 #define PORTSC_WAKE_ON_CONNECT_DIS (0x1<<21)
93 #define PORTSC_WAKE_ON_OVER_CURRENT (0x1<<22)
94 #define PORTSC_PHY_LOW_POWER_SPD (0x1<<23)
95 #define PORTSC_PORT_FORCE_FULL_SPEED (0x1<<24)
96 #define PORTSC_PORT_SPEED_MASK (0x3<<26)
97 #define PORTSC_TRANSCEIVER_WIDTH (0x1<<28)
98 #define PORTSC_PHY_TYPE_SEL (0x3<<30)
99 /* bit 11-10 are line status */
100 #define PORTSC_LINE_STATUS_SE0 (0x0<<10)
101 #define PORTSC_LINE_STATUS_JSTATE (0x1<<10)
102 #define PORTSC_LINE_STATUS_KSTATE (0x2<<10)
103 #define PORTSC_LINE_STATUS_UNDEF (0x3<<10)
104 #define PORTSC_LINE_STATUS_BIT_POS (10)
105
106 /* bit 15-14 are port indicator control */
107 #define PORTSC_PIC_OFF (0x0<<14)
108 #define PORTSC_PIC_AMBER (0x1<<14)
109 #define PORTSC_PIC_GREEN (0x2<<14)
110 #define PORTSC_PIC_UNDEF (0x3<<14)
111 #define PORTSC_PIC_BIT_POS (14)
112
113 /* bit 19-16 are port test control */
114 #define PORTSC_PTC_DISABLE (0x0<<16)
115 #define PORTSC_PTC_JSTATE (0x1<<16)
116 #define PORTSC_PTC_KSTATE (0x2<<16)
117 #define PORTSC_PTC_SEQNAK (0x3<<16)
118 #define PORTSC_PTC_PACKET (0x4<<16)
119 #define PORTSC_PTC_FORCE_EN (0x5<<16)
120 #define PORTSC_PTC_BIT_POS (16)
121
122 /* bit 27-26 are port speed */
123 #define PORTSC_PORT_SPEED_FULL (0x0<<26)
124 #define PORTSC_PORT_SPEED_LOW (0x1<<26)
125 #define PORTSC_PORT_SPEED_HIGH (0x2<<26)
126 #define PORTSC_PORT_SPEED_UNDEF (0x3<<26)
127 #define PORTSC_SPEED_BIT_POS (26)
128
129 /* bit 28 is parallel transceiver width for UTMI interface */
130 #define PORTSC_PTW (0x1<<28)
131 #define PORTSC_PTW_8BIT (0x0<<28)
132 #define PORTSC_PTW_16BIT (0x1<<28)
133
134 /* bit 31-30 are port transceiver select */
135 #define PORTSC_PTS_UTMI (0x0<<30)
136 #define PORTSC_PTS_ULPI (0x2<<30)
137 #define PORTSC_PTS_FSLS_SERIAL (0x3<<30)
138 #define PORTSC_PTS_BIT_POS (30)
139
140 #define PORTSC_W1C_BITS \
141 (PORTSC_CONNECT_STATUS_CHANGE | \
142 PORTSC_PORT_EN_DIS_CHANGE | \
143 PORTSC_OVER_CUURENT_CHG)
144
145 /* OTG Status Control Register Bit Masks */
146 #define OTGSC_CTRL_VBUS_DISCHARGE (0x1<<0)
147 #define OTGSC_CTRL_VBUS_CHARGE (0x1<<1)
148 #define OTGSC_CTRL_OTG_TERMINATION (0x1<<3)
149 #define OTGSC_CTRL_DATA_PULSING (0x1<<4)
150 #define OTGSC_CTRL_ID_PULL_EN (0x1<<5)
151 #define OTGSC_HA_DATA_PULSE (0x1<<6)
152 #define OTGSC_HA_BA (0x1<<7)
153 #define OTGSC_STS_USB_ID (0x1<<8)
154 #define OTGSC_STS_A_VBUS_VALID (0x1<<9)
155 #define OTGSC_STS_A_SESSION_VALID (0x1<<10)
156 #define OTGSC_STS_B_SESSION_VALID (0x1<<11)
157 #define OTGSC_STS_B_SESSION_END (0x1<<12)
158 #define OTGSC_STS_1MS_TOGGLE (0x1<<13)
159 #define OTGSC_STS_DATA_PULSING (0x1<<14)
160 #define OTGSC_INTSTS_USB_ID (0x1<<16)
161 #define OTGSC_INTSTS_A_VBUS_VALID (0x1<<17)
162 #define OTGSC_INTSTS_A_SESSION_VALID (0x1<<18)
163 #define OTGSC_INTSTS_B_SESSION_VALID (0x1<<19)
164 #define OTGSC_INTSTS_B_SESSION_END (0x1<<20)
165 #define OTGSC_INTSTS_1MS (0x1<<21)
166 #define OTGSC_INTSTS_DATA_PULSING (0x1<<22)
167 #define OTGSC_INTR_USB_ID_EN (0x1<<24)
168 #define OTGSC_INTR_A_VBUS_VALID_EN (0x1<<25)
169 #define OTGSC_INTR_A_SESSION_VALID_EN (0x1<<26)
170 #define OTGSC_INTR_B_SESSION_VALID_EN (0x1<<27)
171 #define OTGSC_INTR_B_SESSION_END_EN (0x1<<28)
172 #define OTGSC_INTR_1MS_TIMER_EN (0x1<<29)
173 #define OTGSC_INTR_DATA_PULSING_EN (0x1<<30)
174 #define OTGSC_INTSTS_MASK (0x00ff0000)
175
176 /* USB MODE Register Bit Masks */
177 #define USB_MODE_CTRL_MODE_IDLE (0x0<<0)
178 #define USB_MODE_CTRL_MODE_DEVICE (0x2<<0)
179 #define USB_MODE_CTRL_MODE_HOST (0x3<<0)
180 #define USB_MODE_CTRL_MODE_RSV (0x1<<0)
181 #define USB_MODE_SETUP_LOCK_OFF (0x1<<3)
182 #define USB_MODE_STREAM_DISABLE (0x1<<4)
183 #define USB_MODE_ES (0x1<<2) /* Endian Select */
184
185 /* control Register Bit Masks */
186 #define USB_CTRL_IOENB (0x1<<2)
187 #define USB_CTRL_ULPI_INT0EN (0x1<<0)
188
189 /* BCSR5 */
190 #define BCSR5_INT_USB (0x02)
191
192 /* USB module clk cfg */
193 #define SCCR_OFFS (0xA08)
194 #define SCCR_USB_CLK_DISABLE (0x00000000) /* USB clk disable */
195 #define SCCR_USB_MPHCM_11 (0x00c00000)
196 #define SCCR_USB_MPHCM_01 (0x00400000)
197 #define SCCR_USB_MPHCM_10 (0x00800000)
198 #define SCCR_USB_DRCM_11 (0x00300000)
199 #define SCCR_USB_DRCM_01 (0x00100000)
200 #define SCCR_USB_DRCM_10 (0x00200000)
201
202 #define SICRL_OFFS (0x114)
203 #define SICRL_USB0 (0x40000000)
204 #define SICRL_USB1 (0x20000000)
205
206 #define SICRH_OFFS (0x118)
207 #define SICRH_USB_UTMI (0x00020000)
208
209 /* OTG interrupt enable bit masks */
210 #define OTGSC_INTERRUPT_ENABLE_BITS_MASK \
211 (OTGSC_INTR_USB_ID_EN | \
212 OTGSC_INTR_1MS_TIMER_EN | \
213 OTGSC_INTR_A_VBUS_VALID_EN | \
214 OTGSC_INTR_A_SESSION_VALID_EN | \
215 OTGSC_INTR_B_SESSION_VALID_EN | \
216 OTGSC_INTR_B_SESSION_END_EN | \
217 OTGSC_INTR_DATA_PULSING_EN)
218
219 /* OTG interrupt status bit masks */
220 #define OTGSC_INTERRUPT_STATUS_BITS_MASK \
221 (OTGSC_INTSTS_USB_ID | \
222 OTGSC_INTR_1MS_TIMER_EN | \
223 OTGSC_INTSTS_A_VBUS_VALID | \
224 OTGSC_INTSTS_A_SESSION_VALID | \
225 OTGSC_INTSTS_B_SESSION_VALID | \
226 OTGSC_INTSTS_B_SESSION_END | \
227 OTGSC_INTSTS_DATA_PULSING)
228
229 /*
230 * A-DEVICE timing constants
231 */
232
233 /* Wait for VBUS Rise */
234 #define TA_WAIT_VRISE (100) /* a_wait_vrise 100 ms, section: 6.6.5.1 */
235
236 /* Wait for B-Connect */
237 #define TA_WAIT_BCON (10000) /* a_wait_bcon > 1 sec, section: 6.6.5.2
238 * This is only used to get out of
239 * OTG_STATE_A_WAIT_BCON state if there was
240 * no connection for these many milliseconds
241 */
242
243 /* A-Idle to B-Disconnect */
244 /* It is necessary for this timer to be more than 750 ms because of a bug in OPT
245 * test 5.4 in which B OPT disconnects after 750 ms instead of 75ms as stated
246 * in the test description
247 */
248 #define TA_AIDL_BDIS (5000) /* a_suspend minimum 200 ms, section: 6.6.5.3 */
249
250 /* B-Idle to A-Disconnect */
251 #define TA_BIDL_ADIS (12) /* 3 to 200 ms */
252
253 /* B-device timing constants */
254
255
256 /* Data-Line Pulse Time*/
257 #define TB_DATA_PLS (10) /* b_srp_init,continue 5~10ms, section:5.3.3 */
258 #define TB_DATA_PLS_MIN (5) /* minimum 5 ms */
259 #define TB_DATA_PLS_MAX (10) /* maximum 10 ms */
260
261 /* SRP Initiate Time */
262 #define TB_SRP_INIT (100) /* b_srp_init,maximum 100 ms, section:5.3.8 */
263
264 /* SRP Fail Time */
265 #define TB_SRP_FAIL (7000) /* b_srp_init,Fail time 5~30s, section:6.8.2.2*/
266
267 /* SRP result wait time */
268 #define TB_SRP_WAIT (60)
269
270 /* VBus time */
271 #define TB_VBUS_PLS (30) /* time to keep vbus pulsing asserted */
272
273 /* Discharge time */
274 /* This time should be less than 10ms. It varies from system to system. */
275 #define TB_VBUS_DSCHRG (8)
276
277 /* A-SE0 to B-Reset */
278 #define TB_ASE0_BRST (20) /* b_wait_acon, mini 3.125 ms,section:6.8.2.4 */
279
280 /* A bus suspend timer before we can switch to b_wait_aconn */
281 #define TB_A_SUSPEND (7)
282 #define TB_BUS_RESUME (12)
283
284 /* SE0 Time Before SRP */
285 #define TB_SE0_SRP (2) /* b_idle,minimum 2 ms, section:5.3.2 */
286
287 #define SET_OTG_STATE(phy, newstate) ((phy)->otg->state = newstate)
288
289 struct usb_dr_mmap {
290 /* Capability register */
291 u8 res1[256];
292 u16 caplength; /* Capability Register Length */
293 u16 hciversion; /* Host Controller Interface Version */
294 u32 hcsparams; /* Host Controller Structual Parameters */
295 u32 hccparams; /* Host Controller Capability Parameters */
296 u8 res2[20];
297 u32 dciversion; /* Device Controller Interface Version */
298 u32 dccparams; /* Device Controller Capability Parameters */
299 u8 res3[24];
300 /* Operation register */
301 u32 usbcmd; /* USB Command Register */
302 u32 usbsts; /* USB Status Register */
303 u32 usbintr; /* USB Interrupt Enable Register */
304 u32 frindex; /* Frame Index Register */
305 u8 res4[4];
306 u32 deviceaddr; /* Device Address */
307 u32 endpointlistaddr; /* Endpoint List Address Register */
308 u8 res5[4];
309 u32 burstsize; /* Master Interface Data Burst Size Register */
310 u32 txttfilltuning; /* Transmit FIFO Tuning Controls Register */
311 u8 res6[8];
312 u32 ulpiview; /* ULPI register access */
313 u8 res7[12];
314 u32 configflag; /* Configure Flag Register */
315 u32 portsc; /* Port 1 Status and Control Register */
316 u8 res8[28];
317 u32 otgsc; /* On-The-Go Status and Control */
318 u32 usbmode; /* USB Mode Register */
319 u32 endptsetupstat; /* Endpoint Setup Status Register */
320 u32 endpointprime; /* Endpoint Initialization Register */
321 u32 endptflush; /* Endpoint Flush Register */
322 u32 endptstatus; /* Endpoint Status Register */
323 u32 endptcomplete; /* Endpoint Complete Register */
324 u32 endptctrl[6]; /* Endpoint Control Registers */
325 u8 res9[552];
326 u32 snoop1;
327 u32 snoop2;
328 u32 age_cnt_thresh; /* Age Count Threshold Register */
329 u32 pri_ctrl; /* Priority Control Register */
330 u32 si_ctrl; /* System Interface Control Register */
331 u8 res10[236];
332 u32 control; /* General Purpose Control Register */
333 };
334
335 struct fsl_otg_timer {
336 unsigned long expires; /* Number of count increase to timeout */
337 unsigned long count; /* Tick counter */
338 void (*function)(unsigned long); /* Timeout function */
339 unsigned long data; /* Data passed to function */
340 struct list_head list;
341 };
342
otg_timer_initializer(void (* function)(unsigned long),unsigned long expires,unsigned long data)343 inline struct fsl_otg_timer *otg_timer_initializer
344 (void (*function)(unsigned long), unsigned long expires, unsigned long data)
345 {
346 struct fsl_otg_timer *timer;
347
348 timer = kmalloc(sizeof(struct fsl_otg_timer), GFP_KERNEL);
349 if (!timer)
350 return NULL;
351 timer->function = function;
352 timer->expires = expires;
353 timer->data = data;
354 return timer;
355 }
356
357 struct fsl_otg {
358 struct usb_phy phy;
359 struct otg_fsm fsm;
360 struct usb_dr_mmap *dr_mem_map;
361 struct delayed_work otg_event;
362
363 /* used for usb host */
364 struct work_struct work_wq;
365 u8 host_working;
366
367 int irq;
368 };
369
370 struct fsl_otg_config {
371 u8 otg_port;
372 };
373
374 #define FSL_OTG_NAME "fsl-usb2-otg"
375
376 void fsl_otg_add_timer(struct otg_fsm *fsm, void *timer);
377 void fsl_otg_del_timer(struct otg_fsm *fsm, void *timer);
378 void fsl_otg_pulse_vbus(void);
379
