1 /* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ 2 /* 3 * VFIO API definition 4 * 5 * Copyright (C) 2012 Red Hat, Inc. All rights reserved. 6 * Author: Alex Williamson <alex.williamson@redhat.com> 7 * 8 * This program is free software; you can redistribute it and/or modify 9 * it under the terms of the GNU General Public License version 2 as 10 * published by the Free Software Foundation. 11 */ 12 #ifndef _UAPIVFIO_H 13 #define _UAPIVFIO_H 14 15 #include <linux/types.h> 16 #include <linux/ioctl.h> 17 18 #define VFIO_API_VERSION 0 19 20 21 /* Kernel & User level defines for VFIO IOCTLs. */ 22 23 /* Extensions */ 24 25 #define VFIO_TYPE1_IOMMU 1 26 #define VFIO_SPAPR_TCE_IOMMU 2 27 #define VFIO_TYPE1v2_IOMMU 3 28 /* 29 * IOMMU enforces DMA cache coherence (ex. PCIe NoSnoop stripping). This 30 * capability is subject to change as groups are added or removed. 31 */ 32 #define VFIO_DMA_CC_IOMMU 4 33 34 /* Check if EEH is supported */ 35 #define VFIO_EEH 5 36 37 /* Two-stage IOMMU */ 38 #define VFIO_TYPE1_NESTING_IOMMU 6 /* Implies v2 */ 39 40 #define VFIO_SPAPR_TCE_v2_IOMMU 7 41 42 /* 43 * The No-IOMMU IOMMU offers no translation or isolation for devices and 44 * supports no ioctls outside of VFIO_CHECK_EXTENSION. Use of VFIO's No-IOMMU 45 * code will taint the host kernel and should be used with extreme caution. 46 */ 47 #define VFIO_NOIOMMU_IOMMU 8 48 49 /* 50 * The IOCTL interface is designed for extensibility by embedding the 51 * structure length (argsz) and flags into structures passed between 52 * kernel and userspace. We therefore use the _IO() macro for these 53 * defines to avoid implicitly embedding a size into the ioctl request. 54 * As structure fields are added, argsz will increase to match and flag 55 * bits will be defined to indicate additional fields with valid data. 56 * It's *always* the caller's responsibility to indicate the size of 57 * the structure passed by setting argsz appropriately. 58 */ 59 60 #define VFIO_TYPE (';') 61 #define VFIO_BASE 100 62 63 /* 64 * For extension of INFO ioctls, VFIO makes use of a capability chain 65 * designed after PCI/e capabilities. A flag bit indicates whether 66 * this capability chain is supported and a field defined in the fixed 67 * structure defines the offset of the first capability in the chain. 68 * This field is only valid when the corresponding bit in the flags 69 * bitmap is set. This offset field is relative to the start of the 70 * INFO buffer, as is the next field within each capability header. 71 * The id within the header is a shared address space per INFO ioctl, 72 * while the version field is specific to the capability id. The 73 * contents following the header are specific to the capability id. 74 */ 75 struct vfio_info_cap_header { 76 __u16 id; /* Identifies capability */ 77 __u16 version; /* Version specific to the capability ID */ 78 __u32 next; /* Offset of next capability */ 79 }; 80 81 /* 82 * Callers of INFO ioctls passing insufficiently sized buffers will see 83 * the capability chain flag bit set, a zero value for the first capability 84 * offset (if available within the provided argsz), and argsz will be 85 * updated to report the necessary buffer size. For compatibility, the 86 * INFO ioctl will not report error in this case, but the capability chain 87 * will not be available. 88 */ 89 90 /* -------- IOCTLs for VFIO file descriptor (/dev/vfio/vfio) -------- */ 91 92 /** 93 * VFIO_GET_API_VERSION - _IO(VFIO_TYPE, VFIO_BASE + 0) 94 * 95 * Report the version of the VFIO API. This allows us to bump the entire 96 * API version should we later need to add or change features in incompatible 97 * ways. 98 * Return: VFIO_API_VERSION 99 * Availability: Always 100 */ 101 #define VFIO_GET_API_VERSION _IO(VFIO_TYPE, VFIO_BASE + 0) 102 103 /** 104 * VFIO_CHECK_EXTENSION - _IOW(VFIO_TYPE, VFIO_BASE + 1, __u32) 105 * 106 * Check whether an extension is supported. 107 * Return: 0 if not supported, 1 (or some other positive integer) if supported. 108 * Availability: Always 109 */ 110 #define VFIO_CHECK_EXTENSION _IO(VFIO_TYPE, VFIO_BASE + 1) 111 112 /** 113 * VFIO_SET_IOMMU - _IOW(VFIO_TYPE, VFIO_BASE + 2, __s32) 114 * 115 * Set the iommu to the given type. The type must be supported by an 116 * iommu driver as verified by calling CHECK_EXTENSION using the same 117 * type. A group must be set to this file descriptor before this 118 * ioctl is available. The IOMMU interfaces enabled by this call are 119 * specific to the value set. 120 * Return: 0 on success, -errno on failure 121 * Availability: When VFIO group attached 122 */ 123 #define VFIO_SET_IOMMU _IO(VFIO_TYPE, VFIO_BASE + 2) 124 125 /* -------- IOCTLs for GROUP file descriptors (/dev/vfio/$GROUP) -------- */ 126 127 /** 128 * VFIO_GROUP_GET_STATUS - _IOR(VFIO_TYPE, VFIO_BASE + 3, 129 * struct vfio_group_status) 130 * 131 * Retrieve information about the group. Fills in provided 132 * struct vfio_group_info. Caller sets argsz. 133 * Return: 0 on succes, -errno on failure. 134 * Availability: Always 135 */ 136 struct vfio_group_status { 137 __u32 argsz; 138 __u32 flags; 139 #define VFIO_GROUP_FLAGS_VIABLE (1 << 0) 140 #define VFIO_GROUP_FLAGS_CONTAINER_SET (1 << 1) 141 }; 142 #define VFIO_GROUP_GET_STATUS _IO(VFIO_TYPE, VFIO_BASE + 3) 143 144 /** 145 * VFIO_GROUP_SET_CONTAINER - _IOW(VFIO_TYPE, VFIO_BASE + 4, __s32) 146 * 147 * Set the container for the VFIO group to the open VFIO file 148 * descriptor provided. Groups may only belong to a single 149 * container. Containers may, at their discretion, support multiple 150 * groups. Only when a container is set are all of the interfaces 151 * of the VFIO file descriptor and the VFIO group file descriptor 152 * available to the user. 153 * Return: 0 on success, -errno on failure. 154 * Availability: Always 155 */ 156 #define VFIO_GROUP_SET_CONTAINER _IO(VFIO_TYPE, VFIO_BASE + 4) 157 158 /** 159 * VFIO_GROUP_UNSET_CONTAINER - _IO(VFIO_TYPE, VFIO_BASE + 5) 160 * 161 * Remove the group from the attached container. This is the 162 * opposite of the SET_CONTAINER call and returns the group to 163 * an initial state. All device file descriptors must be released 164 * prior to calling this interface. When removing the last group 165 * from a container, the IOMMU will be disabled and all state lost, 166 * effectively also returning the VFIO file descriptor to an initial 167 * state. 168 * Return: 0 on success, -errno on failure. 169 * Availability: When attached to container 170 */ 171 #define VFIO_GROUP_UNSET_CONTAINER _IO(VFIO_TYPE, VFIO_BASE + 5) 172 173 /** 174 * VFIO_GROUP_GET_DEVICE_FD - _IOW(VFIO_TYPE, VFIO_BASE + 6, char) 175 * 176 * Return a new file descriptor for the device object described by 177 * the provided string. The string should match a device listed in 178 * the devices subdirectory of the IOMMU group sysfs entry. The 179 * group containing the device must already be added to this context. 180 * Return: new file descriptor on success, -errno on failure. 181 * Availability: When attached to container 182 */ 183 #define VFIO_GROUP_GET_DEVICE_FD _IO(VFIO_TYPE, VFIO_BASE + 6) 184 185 /* --------------- IOCTLs for DEVICE file descriptors --------------- */ 186 187 /** 188 * VFIO_DEVICE_GET_INFO - _IOR(VFIO_TYPE, VFIO_BASE + 7, 189 * struct vfio_device_info) 190 * 191 * Retrieve information about the device. Fills in provided 192 * struct vfio_device_info. Caller sets argsz. 193 * Return: 0 on success, -errno on failure. 194 */ 195 struct vfio_device_info { 196 __u32 argsz; 197 __u32 flags; 198 #define VFIO_DEVICE_FLAGS_RESET (1 << 0) /* Device supports reset */ 199 #define VFIO_DEVICE_FLAGS_PCI (1 << 1) /* vfio-pci device */ 200 #define VFIO_DEVICE_FLAGS_PLATFORM (1 << 2) /* vfio-platform device */ 201 #define VFIO_DEVICE_FLAGS_AMBA (1 << 3) /* vfio-amba device */ 202 #define VFIO_DEVICE_FLAGS_CCW (1 << 4) /* vfio-ccw device */ 203 #define VFIO_DEVICE_FLAGS_AP (1 << 5) /* vfio-ap device */ 204 __u32 num_regions; /* Max region index + 1 */ 205 __u32 num_irqs; /* Max IRQ index + 1 */ 206 }; 207 #define VFIO_DEVICE_GET_INFO _IO(VFIO_TYPE, VFIO_BASE + 7) 208 209 /* 210 * Vendor driver using Mediated device framework should provide device_api 211 * attribute in supported type attribute groups. Device API string should be one 212 * of the following corresponding to device flags in vfio_device_info structure. 213 */ 214 215 #define VFIO_DEVICE_API_PCI_STRING "vfio-pci" 216 #define VFIO_DEVICE_API_PLATFORM_STRING "vfio-platform" 217 #define VFIO_DEVICE_API_AMBA_STRING "vfio-amba" 218 #define VFIO_DEVICE_API_CCW_STRING "vfio-ccw" 219 #define VFIO_DEVICE_API_AP_STRING "vfio-ap" 220 221 /** 222 * VFIO_DEVICE_GET_REGION_INFO - _IOWR(VFIO_TYPE, VFIO_BASE + 8, 223 * struct vfio_region_info) 224 * 225 * Retrieve information about a device region. Caller provides 226 * struct vfio_region_info with index value set. Caller sets argsz. 227 * Implementation of region mapping is bus driver specific. This is 228 * intended to describe MMIO, I/O port, as well as bus specific 229 * regions (ex. PCI config space). Zero sized regions may be used 230 * to describe unimplemented regions (ex. unimplemented PCI BARs). 231 * Return: 0 on success, -errno on failure. 232 */ 233 struct vfio_region_info { 234 __u32 argsz; 235 __u32 flags; 236 #define VFIO_REGION_INFO_FLAG_READ (1 << 0) /* Region supports read */ 237 #define VFIO_REGION_INFO_FLAG_WRITE (1 << 1) /* Region supports write */ 238 #define VFIO_REGION_INFO_FLAG_MMAP (1 << 2) /* Region supports mmap */ 239 #define VFIO_REGION_INFO_FLAG_CAPS (1 << 3) /* Info supports caps */ 240 __u32 index; /* Region index */ 241 __u32 cap_offset; /* Offset within info struct of first cap */ 242 __u64 size; /* Region size (bytes) */ 243 __u64 offset; /* Region offset from start of device fd */ 244 }; 245 #define VFIO_DEVICE_GET_REGION_INFO _IO(VFIO_TYPE, VFIO_BASE + 8) 246 247 /* 248 * The sparse mmap capability allows finer granularity of specifying areas 249 * within a region with mmap support. When specified, the user should only 250 * mmap the offset ranges specified by the areas array. mmaps outside of the 251 * areas specified may fail (such as the range covering a PCI MSI-X table) or 252 * may result in improper device behavior. 253 * 254 * The structures below define version 1 of this capability. 255 */ 256 #define VFIO_REGION_INFO_CAP_SPARSE_MMAP 1 257 258 struct vfio_region_sparse_mmap_area { 259 __u64 offset; /* Offset of mmap'able area within region */ 260 __u64 size; /* Size of mmap'able area */ 261 }; 262 263 struct vfio_region_info_cap_sparse_mmap { 264 struct vfio_info_cap_header header; 265 __u32 nr_areas; 266 __u32 reserved; 267 struct vfio_region_sparse_mmap_area areas[]; 268 }; 269 270 /* 271 * The device specific type capability allows regions unique to a specific 272 * device or class of devices to be exposed. This helps solve the problem for 273 * vfio bus drivers of defining which region indexes correspond to which region 274 * on the device, without needing to resort to static indexes, as done by 275 * vfio-pci. For instance, if we were to go back in time, we might remove 276 * VFIO_PCI_VGA_REGION_INDEX and let vfio-pci simply define that all indexes 277 * greater than or equal to VFIO_PCI_NUM_REGIONS are device specific and we'd 278 * make a "VGA" device specific type to describe the VGA access space. This 279 * means that non-VGA devices wouldn't need to waste this index, and thus the 280 * address space associated with it due to implementation of device file 281 * descriptor offsets in vfio-pci. 282 * 283 * The current implementation is now part of the user ABI, so we can't use this 284 * for VGA, but there are other upcoming use cases, such as opregions for Intel 285 * IGD devices and framebuffers for vGPU devices. We missed VGA, but we'll 286 * use this for future additions. 287 * 288 * The structure below defines version 1 of this capability. 289 */ 290 #define VFIO_REGION_INFO_CAP_TYPE 2 291 292 struct vfio_region_info_cap_type { 293 struct vfio_info_cap_header header; 294 __u32 type; /* global per bus driver */ 295 __u32 subtype; /* type specific */ 296 }; 297 298 /* 299 * List of region types, global per bus driver. 300 * If you introduce a new type, please add it here. 301 */ 302 303 /* PCI region type containing a PCI vendor part */ 304 #define VFIO_REGION_TYPE_PCI_VENDOR_TYPE (1 << 31) 305 #define VFIO_REGION_TYPE_PCI_VENDOR_MASK (0xffff) 306 #define VFIO_REGION_TYPE_GFX (1) 307 #define VFIO_REGION_TYPE_CCW (2) 308 309 /* sub-types for VFIO_REGION_TYPE_PCI_* */ 310 311 /* 8086 vendor PCI sub-types */ 312 #define VFIO_REGION_SUBTYPE_INTEL_IGD_OPREGION (1) 313 #define VFIO_REGION_SUBTYPE_INTEL_IGD_HOST_CFG (2) 314 #define VFIO_REGION_SUBTYPE_INTEL_IGD_LPC_CFG (3) 315 316 /* 10de vendor PCI sub-types */ 317 /* 318 * NVIDIA GPU NVlink2 RAM is coherent RAM mapped onto the host address space. 319 */ 320 #define VFIO_REGION_SUBTYPE_NVIDIA_NVLINK2_RAM (1) 321 322 /* 1014 vendor PCI sub-types */ 323 /* 324 * IBM NPU NVlink2 ATSD (Address Translation Shootdown) register of NPU 325 * to do TLB invalidation on a GPU. 326 */ 327 #define VFIO_REGION_SUBTYPE_IBM_NVLINK2_ATSD (1) 328 329 /* sub-types for VFIO_REGION_TYPE_GFX */ 330 #define VFIO_REGION_SUBTYPE_GFX_EDID (1) 331 332 /** 333 * struct vfio_region_gfx_edid - EDID region layout. 334 * 335 * Set display link state and EDID blob. 336 * 337 * The EDID blob has monitor information such as brand, name, serial 338 * number, physical size, supported video modes and more. 339 * 340 * This special region allows userspace (typically qemu) set a virtual 341 * EDID for the virtual monitor, which allows a flexible display 342 * configuration. 343 * 344 * For the edid blob spec look here: 345 * https://en.wikipedia.org/wiki/Extended_Display_Identification_Data 346 * 347 * On linux systems you can find the EDID blob in sysfs: 348 * /sys/class/drm/${card}/${connector}/edid 349 * 350 * You can use the edid-decode ulility (comes with xorg-x11-utils) to 351 * decode the EDID blob. 352 * 353 * @edid_offset: location of the edid blob, relative to the 354 * start of the region (readonly). 355 * @edid_max_size: max size of the edid blob (readonly). 356 * @edid_size: actual edid size (read/write). 357 * @link_state: display link state (read/write). 358 * VFIO_DEVICE_GFX_LINK_STATE_UP: Monitor is turned on. 359 * VFIO_DEVICE_GFX_LINK_STATE_DOWN: Monitor is turned off. 360 * @max_xres: max display width (0 == no limitation, readonly). 361 * @max_yres: max display height (0 == no limitation, readonly). 362 * 363 * EDID update protocol: 364 * (1) set link-state to down. 365 * (2) update edid blob and size. 366 * (3) set link-state to up. 367 */ 368 struct vfio_region_gfx_edid { 369 __u32 edid_offset; 370 __u32 edid_max_size; 371 __u32 edid_size; 372 __u32 max_xres; 373 __u32 max_yres; 374 __u32 link_state; 375 #define VFIO_DEVICE_GFX_LINK_STATE_UP 1 376 #define VFIO_DEVICE_GFX_LINK_STATE_DOWN 2 377 }; 378 379 /* sub-types for VFIO_REGION_TYPE_CCW */ 380 #define VFIO_REGION_SUBTYPE_CCW_ASYNC_CMD (1) 381 382 /* 383 * The MSIX mappable capability informs that MSIX data of a BAR can be mmapped 384 * which allows direct access to non-MSIX registers which happened to be within 385 * the same system page. 386 * 387 * Even though the userspace gets direct access to the MSIX data, the existing 388 * VFIO_DEVICE_SET_IRQS interface must still be used for MSIX configuration. 389 */ 390 #define VFIO_REGION_INFO_CAP_MSIX_MAPPABLE 3 391 392 /* 393 * Capability with compressed real address (aka SSA - small system address) 394 * where GPU RAM is mapped on a system bus. Used by a GPU for DMA routing 395 * and by the userspace to associate a NVLink bridge with a GPU. 396 */ 397 #define VFIO_REGION_INFO_CAP_NVLINK2_SSATGT 4 398 399 struct vfio_region_info_cap_nvlink2_ssatgt { 400 struct vfio_info_cap_header header; 401 __u64 tgt; 402 }; 403 404 /* 405 * Capability with an NVLink link speed. The value is read by 406 * the NVlink2 bridge driver from the bridge's "ibm,nvlink-speed" 407 * property in the device tree. The value is fixed in the hardware 408 * and failing to provide the correct value results in the link 409 * not working with no indication from the driver why. 410 */ 411 #define VFIO_REGION_INFO_CAP_NVLINK2_LNKSPD 5 412 413 struct vfio_region_info_cap_nvlink2_lnkspd { 414 struct vfio_info_cap_header header; 415 __u32 link_speed; 416 __u32 __pad; 417 }; 418 419 /** 420 * VFIO_DEVICE_GET_IRQ_INFO - _IOWR(VFIO_TYPE, VFIO_BASE + 9, 421 * struct vfio_irq_info) 422 * 423 * Retrieve information about a device IRQ. Caller provides 424 * struct vfio_irq_info with index value set. Caller sets argsz. 425 * Implementation of IRQ mapping is bus driver specific. Indexes 426 * using multiple IRQs are primarily intended to support MSI-like 427 * interrupt blocks. Zero count irq blocks may be used to describe 428 * unimplemented interrupt types. 429 * 430 * The EVENTFD flag indicates the interrupt index supports eventfd based 431 * signaling. 432 * 433 * The MASKABLE flags indicates the index supports MASK and UNMASK 434 * actions described below. 435 * 436 * AUTOMASKED indicates that after signaling, the interrupt line is 437 * automatically masked by VFIO and the user needs to unmask the line 438 * to receive new interrupts. This is primarily intended to distinguish 439 * level triggered interrupts. 440 * 441 * The NORESIZE flag indicates that the interrupt lines within the index 442 * are setup as a set and new subindexes cannot be enabled without first 443 * disabling the entire index. This is used for interrupts like PCI MSI 444 * and MSI-X where the driver may only use a subset of the available 445 * indexes, but VFIO needs to enable a specific number of vectors 446 * upfront. In the case of MSI-X, where the user can enable MSI-X and 447 * then add and unmask vectors, it's up to userspace to make the decision 448 * whether to allocate the maximum supported number of vectors or tear 449 * down setup and incrementally increase the vectors as each is enabled. 450 */ 451 struct vfio_irq_info { 452 __u32 argsz; 453 __u32 flags; 454 #define VFIO_IRQ_INFO_EVENTFD (1 << 0) 455 #define VFIO_IRQ_INFO_MASKABLE (1 << 1) 456 #define VFIO_IRQ_INFO_AUTOMASKED (1 << 2) 457 #define VFIO_IRQ_INFO_NORESIZE (1 << 3) 458 __u32 index; /* IRQ index */ 459 __u32 count; /* Number of IRQs within this index */ 460 }; 461 #define VFIO_DEVICE_GET_IRQ_INFO _IO(VFIO_TYPE, VFIO_BASE + 9) 462 463 /** 464 * VFIO_DEVICE_SET_IRQS - _IOW(VFIO_TYPE, VFIO_BASE + 10, struct vfio_irq_set) 465 * 466 * Set signaling, masking, and unmasking of interrupts. Caller provides 467 * struct vfio_irq_set with all fields set. 'start' and 'count' indicate 468 * the range of subindexes being specified. 469 * 470 * The DATA flags specify the type of data provided. If DATA_NONE, the 471 * operation performs the specified action immediately on the specified 472 * interrupt(s). For example, to unmask AUTOMASKED interrupt [0,0]: 473 * flags = (DATA_NONE|ACTION_UNMASK), index = 0, start = 0, count = 1. 474 * 475 * DATA_BOOL allows sparse support for the same on arrays of interrupts. 476 * For example, to mask interrupts [0,1] and [0,3] (but not [0,2]): 477 * flags = (DATA_BOOL|ACTION_MASK), index = 0, start = 1, count = 3, 478 * data = {1,0,1} 479 * 480 * DATA_EVENTFD binds the specified ACTION to the provided __s32 eventfd. 481 * A value of -1 can be used to either de-assign interrupts if already 482 * assigned or skip un-assigned interrupts. For example, to set an eventfd 483 * to be trigger for interrupts [0,0] and [0,2]: 484 * flags = (DATA_EVENTFD|ACTION_TRIGGER), index = 0, start = 0, count = 3, 485 * data = {fd1, -1, fd2} 486 * If index [0,1] is previously set, two count = 1 ioctls calls would be 487 * required to set [0,0] and [0,2] without changing [0,1]. 488 * 489 * Once a signaling mechanism is set, DATA_BOOL or DATA_NONE can be used 490 * with ACTION_TRIGGER to perform kernel level interrupt loopback testing 491 * from userspace (ie. simulate hardware triggering). 492 * 493 * Setting of an event triggering mechanism to userspace for ACTION_TRIGGER 494 * enables the interrupt index for the device. Individual subindex interrupts 495 * can be disabled using the -1 value for DATA_EVENTFD or the index can be 496 * disabled as a whole with: flags = (DATA_NONE|ACTION_TRIGGER), count = 0. 497 * 498 * Note that ACTION_[UN]MASK specify user->kernel signaling (irqfds) while 499 * ACTION_TRIGGER specifies kernel->user signaling. 500 */ 501 struct vfio_irq_set { 502 __u32 argsz; 503 __u32 flags; 504 #define VFIO_IRQ_SET_DATA_NONE (1 << 0) /* Data not present */ 505 #define VFIO_IRQ_SET_DATA_BOOL (1 << 1) /* Data is bool (u8) */ 506 #define VFIO_IRQ_SET_DATA_EVENTFD (1 << 2) /* Data is eventfd (s32) */ 507 #define VFIO_IRQ_SET_ACTION_MASK (1 << 3) /* Mask interrupt */ 508 #define VFIO_IRQ_SET_ACTION_UNMASK (1 << 4) /* Unmask interrupt */ 509 #define VFIO_IRQ_SET_ACTION_TRIGGER (1 << 5) /* Trigger interrupt */ 510 __u32 index; 511 __u32 start; 512 __u32 count; 513 __u8 data[]; 514 }; 515 #define VFIO_DEVICE_SET_IRQS _IO(VFIO_TYPE, VFIO_BASE + 10) 516 517 #define VFIO_IRQ_SET_DATA_TYPE_MASK (VFIO_IRQ_SET_DATA_NONE | \ 518 VFIO_IRQ_SET_DATA_BOOL | \ 519 VFIO_IRQ_SET_DATA_EVENTFD) 520 #define VFIO_IRQ_SET_ACTION_TYPE_MASK (VFIO_IRQ_SET_ACTION_MASK | \ 521 VFIO_IRQ_SET_ACTION_UNMASK | \ 522 VFIO_IRQ_SET_ACTION_TRIGGER) 523 /** 524 * VFIO_DEVICE_RESET - _IO(VFIO_TYPE, VFIO_BASE + 11) 525 * 526 * Reset a device. 527 */ 528 #define VFIO_DEVICE_RESET _IO(VFIO_TYPE, VFIO_BASE + 11) 529 530 /* 531 * The VFIO-PCI bus driver makes use of the following fixed region and 532 * IRQ index mapping. Unimplemented regions return a size of zero. 533 * Unimplemented IRQ types return a count of zero. 534 */ 535 536 enum { 537 VFIO_PCI_BAR0_REGION_INDEX, 538 VFIO_PCI_BAR1_REGION_INDEX, 539 VFIO_PCI_BAR2_REGION_INDEX, 540 VFIO_PCI_BAR3_REGION_INDEX, 541 VFIO_PCI_BAR4_REGION_INDEX, 542 VFIO_PCI_BAR5_REGION_INDEX, 543 VFIO_PCI_ROM_REGION_INDEX, 544 VFIO_PCI_CONFIG_REGION_INDEX, 545 /* 546 * Expose VGA regions defined for PCI base class 03, subclass 00. 547 * This includes I/O port ranges 0x3b0 to 0x3bb and 0x3c0 to 0x3df 548 * as well as the MMIO range 0xa0000 to 0xbffff. Each implemented 549 * range is found at it's identity mapped offset from the region 550 * offset, for example 0x3b0 is region_info.offset + 0x3b0. Areas 551 * between described ranges are unimplemented. 552 */ 553 VFIO_PCI_VGA_REGION_INDEX, 554 VFIO_PCI_NUM_REGIONS = 9 /* Fixed user ABI, region indexes >=9 use */ 555 /* device specific cap to define content. */ 556 }; 557 558 enum { 559 VFIO_PCI_INTX_IRQ_INDEX, 560 VFIO_PCI_MSI_IRQ_INDEX, 561 VFIO_PCI_MSIX_IRQ_INDEX, 562 VFIO_PCI_ERR_IRQ_INDEX, 563 VFIO_PCI_REQ_IRQ_INDEX, 564 VFIO_PCI_NUM_IRQS 565 }; 566 567 /* 568 * The vfio-ccw bus driver makes use of the following fixed region and 569 * IRQ index mapping. Unimplemented regions return a size of zero. 570 * Unimplemented IRQ types return a count of zero. 571 */ 572 573 enum { 574 VFIO_CCW_CONFIG_REGION_INDEX, 575 VFIO_CCW_NUM_REGIONS 576 }; 577 578 enum { 579 VFIO_CCW_IO_IRQ_INDEX, 580 VFIO_CCW_NUM_IRQS 581 }; 582 583 /** 584 * VFIO_DEVICE_GET_PCI_HOT_RESET_INFO - _IORW(VFIO_TYPE, VFIO_BASE + 12, 585 * struct vfio_pci_hot_reset_info) 586 * 587 * Return: 0 on success, -errno on failure: 588 * -enospc = insufficient buffer, -enodev = unsupported for device. 589 */ 590 struct vfio_pci_dependent_device { 591 __u32 group_id; 592 __u16 segment; 593 __u8 bus; 594 __u8 devfn; /* Use PCI_SLOT/PCI_FUNC */ 595 }; 596 597 struct vfio_pci_hot_reset_info { 598 __u32 argsz; 599 __u32 flags; 600 __u32 count; 601 struct vfio_pci_dependent_device devices[]; 602 }; 603 604 #define VFIO_DEVICE_GET_PCI_HOT_RESET_INFO _IO(VFIO_TYPE, VFIO_BASE + 12) 605 606 /** 607 * VFIO_DEVICE_PCI_HOT_RESET - _IOW(VFIO_TYPE, VFIO_BASE + 13, 608 * struct vfio_pci_hot_reset) 609 * 610 * Return: 0 on success, -errno on failure. 611 */ 612 struct vfio_pci_hot_reset { 613 __u32 argsz; 614 __u32 flags; 615 __u32 count; 616 __s32 group_fds[]; 617 }; 618 619 #define VFIO_DEVICE_PCI_HOT_RESET _IO(VFIO_TYPE, VFIO_BASE + 13) 620 621 /** 622 * VFIO_DEVICE_QUERY_GFX_PLANE - _IOW(VFIO_TYPE, VFIO_BASE + 14, 623 * struct vfio_device_query_gfx_plane) 624 * 625 * Set the drm_plane_type and flags, then retrieve the gfx plane info. 626 * 627 * flags supported: 628 * - VFIO_GFX_PLANE_TYPE_PROBE and VFIO_GFX_PLANE_TYPE_DMABUF are set 629 * to ask if the mdev supports dma-buf. 0 on support, -EINVAL on no 630 * support for dma-buf. 631 * - VFIO_GFX_PLANE_TYPE_PROBE and VFIO_GFX_PLANE_TYPE_REGION are set 632 * to ask if the mdev supports region. 0 on support, -EINVAL on no 633 * support for region. 634 * - VFIO_GFX_PLANE_TYPE_DMABUF or VFIO_GFX_PLANE_TYPE_REGION is set 635 * with each call to query the plane info. 636 * - Others are invalid and return -EINVAL. 637 * 638 * Note: 639 * 1. Plane could be disabled by guest. In that case, success will be 640 * returned with zero-initialized drm_format, size, width and height 641 * fields. 642 * 2. x_hot/y_hot is set to 0xFFFFFFFF if no hotspot information available 643 * 644 * Return: 0 on success, -errno on other failure. 645 */ 646 struct vfio_device_gfx_plane_info { 647 __u32 argsz; 648 __u32 flags; 649 #define VFIO_GFX_PLANE_TYPE_PROBE (1 << 0) 650 #define VFIO_GFX_PLANE_TYPE_DMABUF (1 << 1) 651 #define VFIO_GFX_PLANE_TYPE_REGION (1 << 2) 652 /* in */ 653 __u32 drm_plane_type; /* type of plane: DRM_PLANE_TYPE_* */ 654 /* out */ 655 __u32 drm_format; /* drm format of plane */ 656 __u64 drm_format_mod; /* tiled mode */ 657 __u32 width; /* width of plane */ 658 __u32 height; /* height of plane */ 659 __u32 stride; /* stride of plane */ 660 __u32 size; /* size of plane in bytes, align on page*/ 661 __u32 x_pos; /* horizontal position of cursor plane */ 662 __u32 y_pos; /* vertical position of cursor plane*/ 663 __u32 x_hot; /* horizontal position of cursor hotspot */ 664 __u32 y_hot; /* vertical position of cursor hotspot */ 665 union { 666 __u32 region_index; /* region index */ 667 __u32 dmabuf_id; /* dma-buf id */ 668 }; 669 }; 670 671 #define VFIO_DEVICE_QUERY_GFX_PLANE _IO(VFIO_TYPE, VFIO_BASE + 14) 672 673 /** 674 * VFIO_DEVICE_GET_GFX_DMABUF - _IOW(VFIO_TYPE, VFIO_BASE + 15, __u32) 675 * 676 * Return a new dma-buf file descriptor for an exposed guest framebuffer 677 * described by the provided dmabuf_id. The dmabuf_id is returned from VFIO_ 678 * DEVICE_QUERY_GFX_PLANE as a token of the exposed guest framebuffer. 679 */ 680 681 #define VFIO_DEVICE_GET_GFX_DMABUF _IO(VFIO_TYPE, VFIO_BASE + 15) 682 683 /** 684 * VFIO_DEVICE_IOEVENTFD - _IOW(VFIO_TYPE, VFIO_BASE + 16, 685 * struct vfio_device_ioeventfd) 686 * 687 * Perform a write to the device at the specified device fd offset, with 688 * the specified data and width when the provided eventfd is triggered. 689 * vfio bus drivers may not support this for all regions, for all widths, 690 * or at all. vfio-pci currently only enables support for BAR regions, 691 * excluding the MSI-X vector table. 692 * 693 * Return: 0 on success, -errno on failure. 694 */ 695 struct vfio_device_ioeventfd { 696 __u32 argsz; 697 __u32 flags; 698 #define VFIO_DEVICE_IOEVENTFD_8 (1 << 0) /* 1-byte write */ 699 #define VFIO_DEVICE_IOEVENTFD_16 (1 << 1) /* 2-byte write */ 700 #define VFIO_DEVICE_IOEVENTFD_32 (1 << 2) /* 4-byte write */ 701 #define VFIO_DEVICE_IOEVENTFD_64 (1 << 3) /* 8-byte write */ 702 #define VFIO_DEVICE_IOEVENTFD_SIZE_MASK (0xf) 703 __u64 offset; /* device fd offset of write */ 704 __u64 data; /* data to be written */ 705 __s32 fd; /* -1 for de-assignment */ 706 }; 707 708 #define VFIO_DEVICE_IOEVENTFD _IO(VFIO_TYPE, VFIO_BASE + 16) 709 710 /* -------- API for Type1 VFIO IOMMU -------- */ 711 712 /** 713 * VFIO_IOMMU_GET_INFO - _IOR(VFIO_TYPE, VFIO_BASE + 12, struct vfio_iommu_info) 714 * 715 * Retrieve information about the IOMMU object. Fills in provided 716 * struct vfio_iommu_info. Caller sets argsz. 717 * 718 * XXX Should we do these by CHECK_EXTENSION too? 719 */ 720 struct vfio_iommu_type1_info { 721 __u32 argsz; 722 __u32 flags; 723 #define VFIO_IOMMU_INFO_PGSIZES (1 << 0) /* supported page sizes info */ 724 #define VFIO_IOMMU_INFO_CAPS (1 << 1) /* Info supports caps */ 725 __u64 iova_pgsizes; /* Bitmap of supported page sizes */ 726 __u32 cap_offset; /* Offset within info struct of first cap */ 727 }; 728 729 /* 730 * The IOVA capability allows to report the valid IOVA range(s) 731 * excluding any non-relaxable reserved regions exposed by 732 * devices attached to the container. Any DMA map attempt 733 * outside the valid iova range will return error. 734 * 735 * The structures below define version 1 of this capability. 736 */ 737 #define VFIO_IOMMU_TYPE1_INFO_CAP_IOVA_RANGE 1 738 739 struct vfio_iova_range { 740 __u64 start; 741 __u64 end; 742 }; 743 744 struct vfio_iommu_type1_info_cap_iova_range { 745 struct vfio_info_cap_header header; 746 __u32 nr_iovas; 747 __u32 reserved; 748 struct vfio_iova_range iova_ranges[]; 749 }; 750 751 #define VFIO_IOMMU_GET_INFO _IO(VFIO_TYPE, VFIO_BASE + 12) 752 753 /** 754 * VFIO_IOMMU_MAP_DMA - _IOW(VFIO_TYPE, VFIO_BASE + 13, struct vfio_dma_map) 755 * 756 * Map process virtual addresses to IO virtual addresses using the 757 * provided struct vfio_dma_map. Caller sets argsz. READ &/ WRITE required. 758 */ 759 struct vfio_iommu_type1_dma_map { 760 __u32 argsz; 761 __u32 flags; 762 #define VFIO_DMA_MAP_FLAG_READ (1 << 0) /* readable from device */ 763 #define VFIO_DMA_MAP_FLAG_WRITE (1 << 1) /* writable from device */ 764 __u64 vaddr; /* Process virtual address */ 765 __u64 iova; /* IO virtual address */ 766 __u64 size; /* Size of mapping (bytes) */ 767 }; 768 769 #define VFIO_IOMMU_MAP_DMA _IO(VFIO_TYPE, VFIO_BASE + 13) 770 771 /** 772 * VFIO_IOMMU_UNMAP_DMA - _IOWR(VFIO_TYPE, VFIO_BASE + 14, 773 * struct vfio_dma_unmap) 774 * 775 * Unmap IO virtual addresses using the provided struct vfio_dma_unmap. 776 * Caller sets argsz. The actual unmapped size is returned in the size 777 * field. No guarantee is made to the user that arbitrary unmaps of iova 778 * or size different from those used in the original mapping call will 779 * succeed. 780 */ 781 struct vfio_iommu_type1_dma_unmap { 782 __u32 argsz; 783 __u32 flags; 784 __u64 iova; /* IO virtual address */ 785 __u64 size; /* Size of mapping (bytes) */ 786 }; 787 788 #define VFIO_IOMMU_UNMAP_DMA _IO(VFIO_TYPE, VFIO_BASE + 14) 789 790 /* 791 * IOCTLs to enable/disable IOMMU container usage. 792 * No parameters are supported. 793 */ 794 #define VFIO_IOMMU_ENABLE _IO(VFIO_TYPE, VFIO_BASE + 15) 795 #define VFIO_IOMMU_DISABLE _IO(VFIO_TYPE, VFIO_BASE + 16) 796 797 /* -------- Additional API for SPAPR TCE (Server POWERPC) IOMMU -------- */ 798 799 /* 800 * The SPAPR TCE DDW info struct provides the information about 801 * the details of Dynamic DMA window capability. 802 * 803 * @pgsizes contains a page size bitmask, 4K/64K/16M are supported. 804 * @max_dynamic_windows_supported tells the maximum number of windows 805 * which the platform can create. 806 * @levels tells the maximum number of levels in multi-level IOMMU tables; 807 * this allows splitting a table into smaller chunks which reduces 808 * the amount of physically contiguous memory required for the table. 809 */ 810 struct vfio_iommu_spapr_tce_ddw_info { 811 __u64 pgsizes; /* Bitmap of supported page sizes */ 812 __u32 max_dynamic_windows_supported; 813 __u32 levels; 814 }; 815 816 /* 817 * The SPAPR TCE info struct provides the information about the PCI bus 818 * address ranges available for DMA, these values are programmed into 819 * the hardware so the guest has to know that information. 820 * 821 * The DMA 32 bit window start is an absolute PCI bus address. 822 * The IOVA address passed via map/unmap ioctls are absolute PCI bus 823 * addresses too so the window works as a filter rather than an offset 824 * for IOVA addresses. 825 * 826 * Flags supported: 827 * - VFIO_IOMMU_SPAPR_INFO_DDW: informs the userspace that dynamic DMA windows 828 * (DDW) support is present. @ddw is only supported when DDW is present. 829 */ 830 struct vfio_iommu_spapr_tce_info { 831 __u32 argsz; 832 __u32 flags; 833 #define VFIO_IOMMU_SPAPR_INFO_DDW (1 << 0) /* DDW supported */ 834 __u32 dma32_window_start; /* 32 bit window start (bytes) */ 835 __u32 dma32_window_size; /* 32 bit window size (bytes) */ 836 struct vfio_iommu_spapr_tce_ddw_info ddw; 837 }; 838 839 #define VFIO_IOMMU_SPAPR_TCE_GET_INFO _IO(VFIO_TYPE, VFIO_BASE + 12) 840 841 /* 842 * EEH PE operation struct provides ways to: 843 * - enable/disable EEH functionality; 844 * - unfreeze IO/DMA for frozen PE; 845 * - read PE state; 846 * - reset PE; 847 * - configure PE; 848 * - inject EEH error. 849 */ 850 struct vfio_eeh_pe_err { 851 __u32 type; 852 __u32 func; 853 __u64 addr; 854 __u64 mask; 855 }; 856 857 struct vfio_eeh_pe_op { 858 __u32 argsz; 859 __u32 flags; 860 __u32 op; 861 union { 862 struct vfio_eeh_pe_err err; 863 }; 864 }; 865 866 #define VFIO_EEH_PE_DISABLE 0 /* Disable EEH functionality */ 867 #define VFIO_EEH_PE_ENABLE 1 /* Enable EEH functionality */ 868 #define VFIO_EEH_PE_UNFREEZE_IO 2 /* Enable IO for frozen PE */ 869 #define VFIO_EEH_PE_UNFREEZE_DMA 3 /* Enable DMA for frozen PE */ 870 #define VFIO_EEH_PE_GET_STATE 4 /* PE state retrieval */ 871 #define VFIO_EEH_PE_STATE_NORMAL 0 /* PE in functional state */ 872 #define VFIO_EEH_PE_STATE_RESET 1 /* PE reset in progress */ 873 #define VFIO_EEH_PE_STATE_STOPPED 2 /* Stopped DMA and IO */ 874 #define VFIO_EEH_PE_STATE_STOPPED_DMA 4 /* Stopped DMA only */ 875 #define VFIO_EEH_PE_STATE_UNAVAIL 5 /* State unavailable */ 876 #define VFIO_EEH_PE_RESET_DEACTIVATE 5 /* Deassert PE reset */ 877 #define VFIO_EEH_PE_RESET_HOT 6 /* Assert hot reset */ 878 #define VFIO_EEH_PE_RESET_FUNDAMENTAL 7 /* Assert fundamental reset */ 879 #define VFIO_EEH_PE_CONFIGURE 8 /* PE configuration */ 880 #define VFIO_EEH_PE_INJECT_ERR 9 /* Inject EEH error */ 881 882 #define VFIO_EEH_PE_OP _IO(VFIO_TYPE, VFIO_BASE + 21) 883 884 /** 885 * VFIO_IOMMU_SPAPR_REGISTER_MEMORY - _IOW(VFIO_TYPE, VFIO_BASE + 17, struct vfio_iommu_spapr_register_memory) 886 * 887 * Registers user space memory where DMA is allowed. It pins 888 * user pages and does the locked memory accounting so 889 * subsequent VFIO_IOMMU_MAP_DMA/VFIO_IOMMU_UNMAP_DMA calls 890 * get faster. 891 */ 892 struct vfio_iommu_spapr_register_memory { 893 __u32 argsz; 894 __u32 flags; 895 __u64 vaddr; /* Process virtual address */ 896 __u64 size; /* Size of mapping (bytes) */ 897 }; 898 #define VFIO_IOMMU_SPAPR_REGISTER_MEMORY _IO(VFIO_TYPE, VFIO_BASE + 17) 899 900 /** 901 * VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY - _IOW(VFIO_TYPE, VFIO_BASE + 18, struct vfio_iommu_spapr_register_memory) 902 * 903 * Unregisters user space memory registered with 904 * VFIO_IOMMU_SPAPR_REGISTER_MEMORY. 905 * Uses vfio_iommu_spapr_register_memory for parameters. 906 */ 907 #define VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY _IO(VFIO_TYPE, VFIO_BASE + 18) 908 909 /** 910 * VFIO_IOMMU_SPAPR_TCE_CREATE - _IOWR(VFIO_TYPE, VFIO_BASE + 19, struct vfio_iommu_spapr_tce_create) 911 * 912 * Creates an additional TCE table and programs it (sets a new DMA window) 913 * to every IOMMU group in the container. It receives page shift, window 914 * size and number of levels in the TCE table being created. 915 * 916 * It allocates and returns an offset on a PCI bus of the new DMA window. 917 */ 918 struct vfio_iommu_spapr_tce_create { 919 __u32 argsz; 920 __u32 flags; 921 /* in */ 922 __u32 page_shift; 923 __u32 __resv1; 924 __u64 window_size; 925 __u32 levels; 926 __u32 __resv2; 927 /* out */ 928 __u64 start_addr; 929 }; 930 #define VFIO_IOMMU_SPAPR_TCE_CREATE _IO(VFIO_TYPE, VFIO_BASE + 19) 931 932 /** 933 * VFIO_IOMMU_SPAPR_TCE_REMOVE - _IOW(VFIO_TYPE, VFIO_BASE + 20, struct vfio_iommu_spapr_tce_remove) 934 * 935 * Unprograms a TCE table from all groups in the container and destroys it. 936 * It receives a PCI bus offset as a window id. 937 */ 938 struct vfio_iommu_spapr_tce_remove { 939 __u32 argsz; 940 __u32 flags; 941 /* in */ 942 __u64 start_addr; 943 }; 944 #define VFIO_IOMMU_SPAPR_TCE_REMOVE _IO(VFIO_TYPE, VFIO_BASE + 20) 945 946 /* ***************************************************************** */ 947 948 #endif /* _UAPIVFIO_H */ 949
