1 /* SPDX-License-Identifier: GPL-2.0-only */ 2 /* 3 * scc2698.h 4 * 5 * driver for the IPOCTAL boards 6 * 7 * Copyright (C) 2009-2012 CERN (www.cern.ch) 8 * Author: Nicolas Serafini, EIC2 SA 9 * Author: Samuel Iglesias Gonsalvez <siglesias@igalia.com> 10 */ 11 12 #ifndef SCC2698_H_ 13 #define SCC2698_H_ 14 15 /* 16 * union scc2698_channel - Channel access to scc2698 IO 17 * 18 * dn value are only spacer. 19 * 20 */ 21 union scc2698_channel { 22 struct { 23 u8 d0, mr; /* Mode register 1/2*/ 24 u8 d1, sr; /* Status register */ 25 u8 d2, r1; /* reserved */ 26 u8 d3, rhr; /* Receive holding register (R) */ 27 u8 junk[8]; /* other crap for block control */ 28 } __packed r; /* Read access */ 29 struct { 30 u8 d0, mr; /* Mode register 1/2 */ 31 u8 d1, csr; /* Clock select register */ 32 u8 d2, cr; /* Command register */ 33 u8 d3, thr; /* Transmit holding register */ 34 u8 junk[8]; /* other crap for block control */ 35 } __packed w; /* Write access */ 36 }; 37 38 /* 39 * union scc2698_block - Block access to scc2698 IO 40 * 41 * The scc2698 contain 4 block. 42 * Each block containt two channel a and b. 43 * dn value are only spacer. 44 * 45 */ 46 union scc2698_block { 47 struct { 48 u8 d0, mra; /* Mode register 1/2 (a) */ 49 u8 d1, sra; /* Status register (a) */ 50 u8 d2, r1; /* reserved */ 51 u8 d3, rhra; /* Receive holding register (a) */ 52 u8 d4, ipcr; /* Input port change register of block */ 53 u8 d5, isr; /* Interrupt status register of block */ 54 u8 d6, ctur; /* Counter timer upper register of block */ 55 u8 d7, ctlr; /* Counter timer lower register of block */ 56 u8 d8, mrb; /* Mode register 1/2 (b) */ 57 u8 d9, srb; /* Status register (b) */ 58 u8 da, r2; /* reserved */ 59 u8 db, rhrb; /* Receive holding register (b) */ 60 u8 dc, r3; /* reserved */ 61 u8 dd, ip; /* Input port register of block */ 62 u8 de, ctg; /* Start counter timer of block */ 63 u8 df, cts; /* Stop counter timer of block */ 64 } __packed r; /* Read access */ 65 struct { 66 u8 d0, mra; /* Mode register 1/2 (a) */ 67 u8 d1, csra; /* Clock select register (a) */ 68 u8 d2, cra; /* Command register (a) */ 69 u8 d3, thra; /* Transmit holding register (a) */ 70 u8 d4, acr; /* Auxiliary control register of block */ 71 u8 d5, imr; /* Interrupt mask register of block */ 72 u8 d6, ctu; /* Counter timer upper register of block */ 73 u8 d7, ctl; /* Counter timer lower register of block */ 74 u8 d8, mrb; /* Mode register 1/2 (b) */ 75 u8 d9, csrb; /* Clock select register (a) */ 76 u8 da, crb; /* Command register (b) */ 77 u8 db, thrb; /* Transmit holding register (b) */ 78 u8 dc, r1; /* reserved */ 79 u8 dd, opcr; /* Output port configuration register of block */ 80 u8 de, r2; /* reserved */ 81 u8 df, r3; /* reserved */ 82 } __packed w; /* Write access */ 83 }; 84 85 #define MR1_CHRL_5_BITS (0x0 << 0) 86 #define MR1_CHRL_6_BITS (0x1 << 0) 87 #define MR1_CHRL_7_BITS (0x2 << 0) 88 #define MR1_CHRL_8_BITS (0x3 << 0) 89 #define MR1_PARITY_EVEN (0x1 << 2) 90 #define MR1_PARITY_ODD (0x0 << 2) 91 #define MR1_PARITY_ON (0x0 << 3) 92 #define MR1_PARITY_FORCE (0x1 << 3) 93 #define MR1_PARITY_OFF (0x2 << 3) 94 #define MR1_PARITY_SPECIAL (0x3 << 3) 95 #define MR1_ERROR_CHAR (0x0 << 5) 96 #define MR1_ERROR_BLOCK (0x1 << 5) 97 #define MR1_RxINT_RxRDY (0x0 << 6) 98 #define MR1_RxINT_FFULL (0x1 << 6) 99 #define MR1_RxRTS_CONTROL_ON (0x1 << 7) 100 #define MR1_RxRTS_CONTROL_OFF (0x0 << 7) 101 102 #define MR2_STOP_BITS_LENGTH_1 (0x7 << 0) 103 #define MR2_STOP_BITS_LENGTH_2 (0xF << 0) 104 #define MR2_CTS_ENABLE_TX_ON (0x1 << 4) 105 #define MR2_CTS_ENABLE_TX_OFF (0x0 << 4) 106 #define MR2_TxRTS_CONTROL_ON (0x1 << 5) 107 #define MR2_TxRTS_CONTROL_OFF (0x0 << 5) 108 #define MR2_CH_MODE_NORMAL (0x0 << 6) 109 #define MR2_CH_MODE_ECHO (0x1 << 6) 110 #define MR2_CH_MODE_LOCAL (0x2 << 6) 111 #define MR2_CH_MODE_REMOTE (0x3 << 6) 112 113 #define CR_ENABLE_RX (0x1 << 0) 114 #define CR_DISABLE_RX (0x1 << 1) 115 #define CR_ENABLE_TX (0x1 << 2) 116 #define CR_DISABLE_TX (0x1 << 3) 117 #define CR_CMD_RESET_MR (0x1 << 4) 118 #define CR_CMD_RESET_RX (0x2 << 4) 119 #define CR_CMD_RESET_TX (0x3 << 4) 120 #define CR_CMD_RESET_ERR_STATUS (0x4 << 4) 121 #define CR_CMD_RESET_BREAK_CHANGE (0x5 << 4) 122 #define CR_CMD_START_BREAK (0x6 << 4) 123 #define CR_CMD_STOP_BREAK (0x7 << 4) 124 #define CR_CMD_ASSERT_RTSN (0x8 << 4) 125 #define CR_CMD_NEGATE_RTSN (0x9 << 4) 126 #define CR_CMD_SET_TIMEOUT_MODE (0xA << 4) 127 #define CR_CMD_DISABLE_TIMEOUT_MODE (0xC << 4) 128 129 #define SR_RX_READY (0x1 << 0) 130 #define SR_FIFO_FULL (0x1 << 1) 131 #define SR_TX_READY (0x1 << 2) 132 #define SR_TX_EMPTY (0x1 << 3) 133 #define SR_OVERRUN_ERROR (0x1 << 4) 134 #define SR_PARITY_ERROR (0x1 << 5) 135 #define SR_FRAMING_ERROR (0x1 << 6) 136 #define SR_RECEIVED_BREAK (0x1 << 7) 137 138 #define SR_ERROR (0xF0) 139 140 #define ACR_DELTA_IP0_IRQ_EN (0x1 << 0) 141 #define ACR_DELTA_IP1_IRQ_EN (0x1 << 1) 142 #define ACR_DELTA_IP2_IRQ_EN (0x1 << 2) 143 #define ACR_DELTA_IP3_IRQ_EN (0x1 << 3) 144 #define ACR_CT_Mask (0x7 << 4) 145 #define ACR_CExt (0x0 << 4) 146 #define ACR_CTxCA (0x1 << 4) 147 #define ACR_CTxCB (0x2 << 4) 148 #define ACR_CClk16 (0x3 << 4) 149 #define ACR_TExt (0x4 << 4) 150 #define ACR_TExt16 (0x5 << 4) 151 #define ACR_TClk (0x6 << 4) 152 #define ACR_TClk16 (0x7 << 4) 153 #define ACR_BRG_SET1 (0x0 << 7) 154 #define ACR_BRG_SET2 (0x1 << 7) 155 156 #define TX_CLK_75 (0x0 << 0) 157 #define TX_CLK_110 (0x1 << 0) 158 #define TX_CLK_38400 (0x2 << 0) 159 #define TX_CLK_150 (0x3 << 0) 160 #define TX_CLK_300 (0x4 << 0) 161 #define TX_CLK_600 (0x5 << 0) 162 #define TX_CLK_1200 (0x6 << 0) 163 #define TX_CLK_2000 (0x7 << 0) 164 #define TX_CLK_2400 (0x8 << 0) 165 #define TX_CLK_4800 (0x9 << 0) 166 #define TX_CLK_1800 (0xA << 0) 167 #define TX_CLK_9600 (0xB << 0) 168 #define TX_CLK_19200 (0xC << 0) 169 #define RX_CLK_75 (0x0 << 4) 170 #define RX_CLK_110 (0x1 << 4) 171 #define RX_CLK_38400 (0x2 << 4) 172 #define RX_CLK_150 (0x3 << 4) 173 #define RX_CLK_300 (0x4 << 4) 174 #define RX_CLK_600 (0x5 << 4) 175 #define RX_CLK_1200 (0x6 << 4) 176 #define RX_CLK_2000 (0x7 << 4) 177 #define RX_CLK_2400 (0x8 << 4) 178 #define RX_CLK_4800 (0x9 << 4) 179 #define RX_CLK_1800 (0xA << 4) 180 #define RX_CLK_9600 (0xB << 4) 181 #define RX_CLK_19200 (0xC << 4) 182 183 #define OPCR_MPOa_RTSN (0x0 << 0) 184 #define OPCR_MPOa_C_TO (0x1 << 0) 185 #define OPCR_MPOa_TxC1X (0x2 << 0) 186 #define OPCR_MPOa_TxC16X (0x3 << 0) 187 #define OPCR_MPOa_RxC1X (0x4 << 0) 188 #define OPCR_MPOa_RxC16X (0x5 << 0) 189 #define OPCR_MPOa_TxRDY (0x6 << 0) 190 #define OPCR_MPOa_RxRDY_FF (0x7 << 0) 191 192 #define OPCR_MPOb_RTSN (0x0 << 4) 193 #define OPCR_MPOb_C_TO (0x1 << 4) 194 #define OPCR_MPOb_TxC1X (0x2 << 4) 195 #define OPCR_MPOb_TxC16X (0x3 << 4) 196 #define OPCR_MPOb_RxC1X (0x4 << 4) 197 #define OPCR_MPOb_RxC16X (0x5 << 4) 198 #define OPCR_MPOb_TxRDY (0x6 << 4) 199 #define OPCR_MPOb_RxRDY_FF (0x7 << 4) 200 201 #define OPCR_MPP_INPUT (0x0 << 7) 202 #define OPCR_MPP_OUTPUT (0x1 << 7) 203 204 #define IMR_TxRDY_A (0x1 << 0) 205 #define IMR_RxRDY_FFULL_A (0x1 << 1) 206 #define IMR_DELTA_BREAK_A (0x1 << 2) 207 #define IMR_COUNTER_READY (0x1 << 3) 208 #define IMR_TxRDY_B (0x1 << 4) 209 #define IMR_RxRDY_FFULL_B (0x1 << 5) 210 #define IMR_DELTA_BREAK_B (0x1 << 6) 211 #define IMR_INPUT_PORT_CHANGE (0x1 << 7) 212 213 #define ISR_TxRDY_A (0x1 << 0) 214 #define ISR_RxRDY_FFULL_A (0x1 << 1) 215 #define ISR_DELTA_BREAK_A (0x1 << 2) 216 #define ISR_COUNTER_READY (0x1 << 3) 217 #define ISR_TxRDY_B (0x1 << 4) 218 #define ISR_RxRDY_FFULL_B (0x1 << 5) 219 #define ISR_DELTA_BREAK_B (0x1 << 6) 220 #define ISR_INPUT_PORT_CHANGE (0x1 << 7) 221 222 #define ACK_INT_REQ0 0 223 #define ACK_INT_REQ1 2 224 225 #endif /* SCC2698_H_ */ 226
