Home
last modified time | relevance | path

Searched refs:KSEG1ADDR (Results 1 – 25 of 71) sorted by relevance

123

/Linux-v5.4/arch/mips/include/asm/mach-ar7/
Dar7.h111 return (readl((void *)KSEG1ADDR(AR7_REGS_GPIO + 0x24)) & 0xffff) == in ar7_is_titan()
118 KSEG1ADDR(AR7_REGS_GPIO + 0x14)) & 0xffff); in ar7_chip_id()
123 unsigned int val = readl((void *)KSEG1ADDR(AR7_REGS_GPIO + in titan_chip_id()
130 return (readl((void *)KSEG1ADDR(AR7_REGS_GPIO + (ar7_is_titan() ? 0x24 : in ar7_chip_rev()
157 (void *)KSEG1ADDR(AR7_REGS_RESET + AR7_RESET_PERIPHERAL); in ar7_device_enable()
165 (void *)KSEG1ADDR(AR7_REGS_RESET + AR7_RESET_PERIPHERAL); in ar7_device_disable()
178 void *power_reg = (void *)KSEG1ADDR(AR7_REGS_POWER); in ar7_device_on()
185 void *power_reg = (void *)KSEG1ADDR(AR7_REGS_POWER); in ar7_device_off()
/Linux-v5.4/arch/mips/include/asm/lasat/
Dlasatint.h6 #define LASAT_INT_STATUS_REG_100 (KSEG1ADDR(0x1c880000))
7 #define LASAT_INT_MASK_REG_100 (KSEG1ADDR(0x1c890000))
11 #define LASAT_INT_STATUS_REG_200 (KSEG1ADDR(0x1104003c))
12 #define LASAT_INT_MASK_REG_200 (KSEG1ADDR(0x1104003c))
Dpicvue.h3 #define PVC_REG_100 KSEG1ADDR(0x1c820000)
11 #define PVC_REG_200 KSEG1ADDR(0x11000000)
Deeprom.h5 #define AT93C_REG_100 KSEG1ADDR(0x1c810000)
13 #define AT93C_REG_200 KSEG1ADDR(0x11000000)
Dds1603.h5 #define DS1603_REG_100 (KSEG1ADDR(0x1c810000))
12 #define DS1603_REG_200 (KSEG1ADDR(0x11000000))
/Linux-v5.4/arch/mips/alchemy/common/
Dirq.c291 void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR); in au1x_ic0_unmask()
301 void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR); in au1x_ic1_unmask()
311 void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR); in au1x_ic0_mask()
321 void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR); in au1x_ic1_mask()
331 void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR); in au1x_ic0_ack()
345 void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR); in au1x_ic1_ack()
359 void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR); in au1x_ic0_maskack()
371 void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR); in au1x_ic1_maskack()
438 base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR); in au1x_ic_settype()
442 base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR); in au1x_ic_settype()
[all …]
Dusb.c268 (void __iomem *)KSEG1ADDR(AU1300_USB_CTL_PHYS_ADDR); in au1300_usb_control()
296 (void __iomem *)KSEG1ADDR(AU1300_USB_CTL_PHYS_ADDR); in au1300_usb_init()
363 (void __iomem *)KSEG1ADDR(AU1200_USB_CTL_PHYS_ADDR); in au1200_usb_control()
386 (void __iomem *)KSEG1ADDR(AU1200_USB_CTL_PHYS_ADDR); in au1200_usb_init()
394 void __iomem *base = (void __iomem *)KSEG1ADDR(rb + reg); in au1000_usb_init()
427 void __iomem *base = (void __iomem *)KSEG1ADDR(rb); in __au1xx0_ohci_control()
514 void __iomem *base = (void __iomem *)KSEG1ADDR(br); in au1000_usb_pm()
532 (void __iomem *)KSEG1ADDR(AU1200_USB_OTG_PHYS_ADDR); in au1200_usb_pm()
552 (void __iomem *)KSEG1ADDR(AU1300_USB_CTL_PHYS_ADDR); in au1300_usb_pm()
/Linux-v5.4/arch/mips/lasat/
Dsetup.c47 .reset_reg = (void *)KSEG1ADDR(0x1c840000),
48 .flash_wp_reg = (void *)KSEG1ADDR(0x1c800000), 2
50 .reset_reg = (void *)KSEG1ADDR(0x11080000),
51 .flash_wp_reg = (void *)KSEG1ADDR(0x11000000), 6
Dserial.c37 lasat_serial_res[0].start = KSEG1ADDR(LASAT_UART_REGS_BASE_100); in lasat_uart_add()
49 lasat_serial_res[0].start = KSEG1ADDR(LASAT_UART_REGS_BASE_200); in lasat_uart_add()
/Linux-v5.4/arch/mips/ath79/
Dearly_printk.c36 void __iomem *base = (void __iomem *)(KSEG1ADDR(AR71XX_UART_BASE)); in prom_putchar_ar71xx()
45 void __iomem *base = (void __iomem *)(KSEG1ADDR(AR933X_UART_BASE)); in prom_putchar_ar933x()
94 gpio_base = (void __iomem *)KSEG1ADDR(AR71XX_GPIO_BASE); in prom_enable_uart()
105 base = (void __iomem *)(KSEG1ADDR(AR71XX_RESET_BASE)); in prom_putchar_init()
/Linux-v5.4/arch/mips/rb532/
Dirq.c62 .base_addr = (u32 *) KSEG1ADDR(IC_GROUP0_PEND + 0 * IC_GROUP_OFFSET)},
65 .base_addr = (u32 *) KSEG1ADDR(IC_GROUP0_PEND + 1 * IC_GROUP_OFFSET)},
68 .base_addr = (u32 *) KSEG1ADDR(IC_GROUP0_PEND + 2 * IC_GROUP_OFFSET)},
71 .base_addr = (u32 *) KSEG1ADDR(IC_GROUP0_PEND + 3 * IC_GROUP_OFFSET)},
74 .base_addr = (u32 *) KSEG1ADDR(IC_GROUP0_PEND + 4 * IC_GROUP_OFFSET)}
/Linux-v5.4/arch/mips/ralink/
Dearly_printk.c31 static __iomem void *uart_membase = (__iomem void *) KSEG1ADDR(EARLY_UART_BASE);
32 static __iomem void *chipid_membase = (__iomem void *) KSEG1ADDR(CHIPID_BASE);
64 uart_membase = (__iomem void *) KSEG1ADDR(EARLY_UART_BASE + in find_uart_base()
Dprom.c42 argv = (char **) KSEG1ADDR(fw_arg1); in prom_init_cmdline()
51 char *p = (char *) KSEG1ADDR(argv[i]); in prom_init_cmdline()
/Linux-v5.4/arch/mips/include/asm/mach-au1x00/
Dgpio-au1000.h275 void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_SYS_PHYS_ADDR); in alchemy_gpio1_input_enable()
286 void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR); in __alchemy_gpio2_mod_dir()
300 void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR); in alchemy_gpio2_set_value()
309 void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR); in alchemy_gpio2_get_value()
361 void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR); in __alchemy_gpio2_mod_int()
443 void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR); in alchemy_gpio2_enable()
457 void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR); in alchemy_gpio2_disable()
Dau1000.h603 void __iomem *b = (void __iomem *)KSEG1ADDR(AU1000_SYS_PHYS_ADDR); in alchemy_rdsys()
610 void __iomem *b = (void __iomem *)KSEG1ADDR(AU1000_SYS_PHYS_ADDR); in alchemy_wrsys()
619 void __iomem *b = (void __iomem *)KSEG1ADDR(AU1000_STATIC_MEM_PHYS_ADDR); in alchemy_rdsmem()
626 void __iomem *b = (void __iomem *)KSEG1ADDR(AU1000_STATIC_MEM_PHYS_ADDR); in alchemy_wrsmem()
726 void __iomem *addr = (void __iomem *)KSEG1ADDR(uart_phys); in alchemy_uart_enable()
741 void __iomem *addr = (void __iomem *)KSEG1ADDR(uart_phys); in alchemy_uart_disable()
749 void __iomem *base = (void __iomem *)KSEG1ADDR(uart_phys); in alchemy_uart_putchar()
/Linux-v5.4/include/video/
Dmaxinefb.h16 #define MAXINEFB_IMS332_ADDRESS KSEG1ADDR(0x1c140000)
22 #define DS5000_xx_ONBOARD_FBMEM_START KSEG1ADDR(0x0a000000)
/Linux-v5.4/arch/mips/ath25/
Dearly_printk.c35 base = (void __iomem *)(KSEG1ADDR(AR2315_UART0_BASE)); in prom_putchar()
37 base = (void __iomem *)(KSEG1ADDR(AR5312_UART0_BASE)); in prom_putchar()
/Linux-v5.4/arch/mips/ar7/
Dmemory.c23 u32 *addr = (u32 *)KSEG1ADDR(AR7_SDRAM_BASE + size - 4); in memsize()
24 u32 *kernel_end = (u32 *)KSEG1ADDR(CPHYSADDR((u32)&_end)); in memsize()
Dprom.c175 struct psbl_rec *psbl = (struct psbl_rec *)(KSEG1ADDR(0x14000300)); in ar7_init_env()
176 void *psp_env = (void *)KSEG1ADDR(psbl->env_base); in ar7_init_env()
240 #define PORT(offset) (KSEG1ADDR(AR7_REGS_UART0 + (offset * 4)))
/Linux-v5.4/arch/mips/emma/markeins/
Dplatform.c96 .membase= (void __iomem*)KSEG1ADDR(EMMA2RH_PFUR0_BASE + 3),
104 .membase = (void __iomem*)KSEG1ADDR(EMMA2RH_PFUR1_BASE + 3),
112 .membase = (void __iomem*)KSEG1ADDR(EMMA2RH_PFUR2_BASE + 3),
/Linux-v5.4/arch/mips/lantiq/
Dprom.c54 char **argv = (char **) KSEG1ADDR(fw_arg1); in prom_init_cmdline()
60 char *p = (char *) KSEG1ADDR(argv[i]); in prom_init_cmdline()
/Linux-v5.4/arch/mips/pci/
Dops-vr41xx.c19 #define PCICONFDREG (void __iomem *)KSEG1ADDR(0x0f000c14)
20 #define PCICONFAREG (void __iomem *)KSEG1ADDR(0x0f000c18)
Dops-nile4.c51 KSEG1ADDR(PCI_WINDOW1) + in nile4_pcibios_config_access()
55 adr = KSEG1ADDR(PCI_WINDOW1) | (busnum << 16) | (devfn << 8) | in nile4_pcibios_config_access()
Dops-emma2rh.c73 u32 base = KSEG1ADDR(EMMA2RH_PCI_CONFIG_BASE); in pci_config_read()
118 u32 base = KSEG1ADDR(EMMA2RH_PCI_CONFIG_BASE); in pci_config_write()
/Linux-v5.4/arch/mips/alchemy/devboards/
Ddb1550.c47 base = (void __iomem *)KSEG1ADDR(AU1550_PSC1_PHYS_ADDR); in db1550_hw_setup()
608 (void __iomem *)KSEG1ADDR(AU1550_PSC1_PHYS_ADDR) + PSC_SEL_OFFSET); in db1550_dev_setup()
611 (void __iomem *)KSEG1ADDR(AU1550_PSC3_PHYS_ADDR) + PSC_SEL_OFFSET); in db1550_dev_setup()
615 (void __iomem *)KSEG1ADDR(AU1550_PSC0_PHYS_ADDR) + PSC_SEL_OFFSET); in db1550_dev_setup()
618 (void __iomem *)KSEG1ADDR(AU1550_PSC2_PHYS_ADDR) + PSC_SEL_OFFSET); in db1550_dev_setup()

123