| /Linux-v5.4/drivers/net/wireless/intersil/hostap/ |
| D | Kconfig | 3 tristate "IEEE 802.11 for Host AP (Prism2/2.5/3 and WEP/TKIP/CCMP)"
21 Host AP mode that allows the card to act as an IEEE 802.11
25 Host AP driver configuration and tools. This site includes
29 This option includes the base Host AP driver code that is shared by
37 bool "Support downloading firmware images with Host AP driver"
40 Configure Host AP driver to include support for firmware image
53 Allow Host AP driver to write firmware images to the non-volatile
62 tristate "Host AP driver for Prism2/2.5/3 in PLX9052 PCI adaptors"
65 Host AP driver's version for Prism2/2.5/3 PC Cards in PLX9052 based
68 "Host AP support for Prism2/2.5/3 IEEE 802.11b" is required for this
[all …]
|
| /Linux-v5.4/Documentation/s390/ |
| D | vfio-ap.rst | 2 Adjunct Processor (AP) facility
8 The Adjunct Processor (AP) facility is an IBM Z cryptographic facility comprised
9 of three AP instructions and from 1 up to 256 PCIe cryptographic adapter cards.
10 The AP devices provide cryptographic functions to all CPUs assigned to a
13 The AP adapter cards are exposed via the AP bus. The motivation for vfio-ap
14 is to make AP cards available to KVM guests using the VFIO mediated device
16 facilities which do most of the hard work of providing direct access to AP
19 AP Architectural Overview
24 * AP adapter
26 An AP adapter is an IBM Z adapter card that can perform cryptographic
[all …]
|
| /Linux-v5.4/Documentation/networking/ |
| D | mac80211-auth-assoc-deauth.txt | 17 mac80211->driver: sta_state(AP, not-exists)
28 mac80211->driver: sta_state(AP, exists)
43 mac80211->driver: sta_state(AP, authenticated)
56 mac80211->driver: sta_state(AP, exists)
57 mac80211->driver: sta_state(AP, authenticated)
62 mac80211->driver: sta_state(AP, associated)
65 mac80211->driver: sta_state(AP, authorized)
81 mac80211->driver: sta_state(AP, authorized)
88 mac80211->driver: sta_state(AP,associated)
89 mac80211->driver: sta_state(AP,authenticated)
[all …]
|
| /Linux-v5.4/Documentation/devicetree/bindings/rtc/ |
| D | rtc-meson-vrtc.txt | 12 application processors (AP) and the secure co-processor (SCP.) When
13 the AP suspends, the SCP will use the value of this register to
15 the SCP will wake up and will then wake the AP.
|
| /Linux-v5.4/Documentation/devicetree/bindings/interrupt-controller/ |
| D | marvell,sei.txt | 10 AP and is wired while a second set comes from the CPs by the mean of
20 coming from the AP, should be 1. The cell is the IRQ
23 for AP interrupts.
|
| /Linux-v5.4/drivers/ide/ |
| D | pdc202xx_old.c | 31 u8 AP = 0, BP = 0, CP = 0; in pdc202xx_set_mode() local
34 pci_read_config_byte(dev, drive_pci, &AP); in pdc202xx_set_mode()
61 AP &= ~0x3f; in pdc202xx_set_mode()
63 AP |= 0x20; /* set IORDY_EN bit */ in pdc202xx_set_mode()
65 AP |= 0x10; /* set Prefetch_EN bit */ in pdc202xx_set_mode()
68 pci_write_config_byte(dev, drive_pci, AP | TA); in pdc202xx_set_mode()
|
| /Linux-v5.4/Documentation/devicetree/bindings/serio/ |
| D | olpc,ap-sp.txt | 1 OLPC AP-SP serio interface
6 - interrupts : SP-AP interrupt
|
| /Linux-v5.4/arch/arm64/boot/dts/rockchip/ |
| D | rk3399pro.dtsi | 10 /* Default to enabled since AP talk to NPU part over pcie */
15 /* Default to enabled since AP talk to NPU part over pcie */
|
| D | rk3399-gru.dtsi | 22 * the AP. AKA:
25 * - Rails _are_ included if the rails go to the AP even if the AP
30 * If two rails are substantially the same from the AP's point of
33 * look the same to the AP because one of these is true:
35 * long as the AP is running.
52 /* EC turns on w/ lpddr_pwr_en; always on for AP */
91 /* EC turns on w/ pp5000_en; always on for AP */
109 /* EC turns on w/ ap_core_en; always on for AP */
138 /* EC turns on w/ ap_core_en; always on for AP */
167 /* EC turns on w/ ap_core_en; always on for AP */
[all …]
|
| /Linux-v5.4/arch/sh/boards/ |
| D | Kconfig | 237 bool "AP-325RXA"
242 Renesas "AP-325RXA" support.
243 Compatible with ALGO SYSTEM CO.,LTD. "AP-320A"
365 bool "AP-SH4A-3A"
370 Select AP-SH4A-3A if configuring for an ALPHAPROJECT AP-SH4A-3A.
373 bool "AP-SH4AD-0A"
379 Select AP-SH4AD-0A if configuring for an ALPHAPROJECT AP-SH4AD-0A.
|
| /Linux-v5.4/drivers/staging/rtl8188eu/ |
| D | Kconfig | 18 bool "Realtek RTL8188EU AP mode"
22 will never be used as an AP, or the target system has limited memory,
|
| /Linux-v5.4/Documentation/devicetree/bindings/clock/ |
| D | arm-syscon-icst.txt | 22 Integrator/AP 22 1 Bit 8 0, rest variable
25 Integrator/AP 46 3 Bit 8 0, rest variable
28 Integrator/AP 22 or 1 17 or (33 or 25 MHz)
|
| D | samsung,s2mps11.txt | 8 The S2MPS11/13/15 and S5M8767 provide three(AP/CP/BT) buffered 32.768 kHz
9 outputs. The S2MPS14 provides two (AP/BT) buffered 32.768 KHz outputs.
|
| /Linux-v5.4/arch/arm/boot/dts/ |
| D | integratorap.dts | 3 * Device Tree for the ARM Integrator/AP platform
10 model = "ARM Integrator/AP";
58 /* 24 MHz chrystal on the Integrator/AP development board */
204 * The Integator/AP predates the idea to have magic numbers
|
| D | bcm4709-buffalo-wxr-1900dhp.dts | 108 /* Switch: AP mode */
110 label = "AP";
|
| D | bcm4708-buffalo-wzr-1750dhp.dts | 122 /* Switch: AP mode */
124 label = "AP";
|
| D | qcom-ipq4019-ap.dk04.1-c3.dts | 7 model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK04.1-C3";
|
| D | qcom-ipq4019-ap.dk04.1-c1.dts | 7 model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK04.1-C1";
|
| D | qcom-ipq8064-ap148.dts | 5 model = "Qualcomm Technologies, Inc. IPQ8064/AP-148";
|
| D | qcom-ipq4019-ap.dk07.1-c2.dts | 7 model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK07.1-C2";
|
| /Linux-v5.4/Documentation/devicetree/bindings/mtd/partitions/ |
| D | arm,arm-firmware-suite.txt | 5 ARM reference designs: Integrator AP, Integrator CP, Versatile AB,
|
| /Linux-v5.4/Documentation/devicetree/bindings/pinctrl/ |
| D | sprd,pinctrl.txt | 13 have several systems (AP/CP/CM4) on one SoC.).
32 Now we have 4 systems for sleep mode on SC9860 SoC: AP system,
51 PUBCP system) do not run linux kernel OS (only AP system run linux
|
| /Linux-v5.4/Documentation/ABI/testing/ |
| D | debugfs-cros-ec | 32 is used for synchronizing the AP host time with the EC
45 the most recent response from the AP's resume message to the EC.
|
| /Linux-v5.4/Documentation/devicetree/bindings/arm/ |
| D | arm-boards | 1 ARM Integrator/AP (Application Platform) and Integrator/CP (Compact Platform)
36 Required properties for the AP system controller:
37 - interrupts: the AP syscon node must include the logical module
46 model = "ARM Integrator/AP";
|
| /Linux-v5.4/sound/soc/sprd/ |
| D | Kconfig | 16 and other AP/CP subsystem.
|
