1 /* SPDX-License-Identifier: ISC */
2 /*
3  * Copyright (c) 2005-2011 Atheros Communications Inc.
4  * Copyright (c) 2011-2017 Qualcomm Atheros, Inc.
5  * Copyright (c) 2018-2019, The Linux Foundation. All rights reserved.
6  */
7 
8 #ifndef _WMI_H_
9 #define _WMI_H_
10 
11 #include <linux/types.h>
12 #include <linux/ieee80211.h>
13 
14 /*
15  * This file specifies the WMI interface for the Unified Software
16  * Architecture.
17  *
18  * It includes definitions of all the commands and events. Commands are
19  * messages from the host to the target. Events and Replies are messages
20  * from the target to the host.
21  *
22  * Ownership of correctness in regards to WMI commands belongs to the host
23  * driver and the target is not required to validate parameters for value,
24  * proper range, or any other checking.
25  *
26  * Guidelines for extending this interface are below.
27  *
28  * 1. Add new WMI commands ONLY within the specified range - 0x9000 - 0x9fff
29  *
30  * 2. Use ONLY u32 type for defining member variables within WMI
31  *    command/event structures. Do not use u8, u16, bool or
32  *    enum types within these structures.
33  *
34  * 3. DO NOT define bit fields within structures. Implement bit fields
35  *    using masks if necessary. Do not use the programming language's bit
36  *    field definition.
37  *
38  * 4. Define macros for encode/decode of u8, u16 fields within
39  *    the u32 variables. Use these macros for set/get of these fields.
40  *    Try to use this to optimize the structure without bloating it with
41  *    u32 variables for every lower sized field.
42  *
43  * 5. Do not use PACK/UNPACK attributes for the structures as each member
44  *    variable is already 4-byte aligned by virtue of being a u32
45  *    type.
46  *
47  * 6. Comment each parameter part of the WMI command/event structure by
48  *    using the 2 stars at the beginning of C comment instead of one star to
49  *    enable HTML document generation using Doxygen.
50  *
51  */
52 
53 /* Control Path */
54 struct wmi_cmd_hdr {
55 	__le32 cmd_id;
56 } __packed;
57 
58 #define WMI_CMD_HDR_CMD_ID_MASK   0x00FFFFFF
59 #define WMI_CMD_HDR_CMD_ID_LSB    0
60 #define WMI_CMD_HDR_PLT_PRIV_MASK 0xFF000000
61 #define WMI_CMD_HDR_PLT_PRIV_LSB  24
62 
63 #define HTC_PROTOCOL_VERSION    0x0002
64 #define WMI_PROTOCOL_VERSION    0x0002
65 
66 /*
67  * There is no signed version of __le32, so for a temporary solution come
68  * up with our own version. The idea is from fs/ntfs/endian.h.
69  *
70  * Use a_ prefix so that it doesn't conflict if we get proper support to
71  * linux/types.h.
72  */
73 typedef __s32 __bitwise a_sle32;
74 
a_cpu_to_sle32(s32 val)75 static inline a_sle32 a_cpu_to_sle32(s32 val)
76 {
77 	return (__force a_sle32)cpu_to_le32(val);
78 }
79 
a_sle32_to_cpu(a_sle32 val)80 static inline s32 a_sle32_to_cpu(a_sle32 val)
81 {
82 	return le32_to_cpu((__force __le32)val);
83 }
84 
85 enum wmi_service {
86 	WMI_SERVICE_BEACON_OFFLOAD = 0,
87 	WMI_SERVICE_SCAN_OFFLOAD,
88 	WMI_SERVICE_ROAM_OFFLOAD,
89 	WMI_SERVICE_BCN_MISS_OFFLOAD,
90 	WMI_SERVICE_STA_PWRSAVE,
91 	WMI_SERVICE_STA_ADVANCED_PWRSAVE,
92 	WMI_SERVICE_AP_UAPSD,
93 	WMI_SERVICE_AP_DFS,
94 	WMI_SERVICE_11AC,
95 	WMI_SERVICE_BLOCKACK,
96 	WMI_SERVICE_PHYERR,
97 	WMI_SERVICE_BCN_FILTER,
98 	WMI_SERVICE_RTT,
99 	WMI_SERVICE_RATECTRL,
100 	WMI_SERVICE_WOW,
101 	WMI_SERVICE_RATECTRL_CACHE,
102 	WMI_SERVICE_IRAM_TIDS,
103 	WMI_SERVICE_ARPNS_OFFLOAD,
104 	WMI_SERVICE_NLO,
105 	WMI_SERVICE_GTK_OFFLOAD,
106 	WMI_SERVICE_SCAN_SCH,
107 	WMI_SERVICE_CSA_OFFLOAD,
108 	WMI_SERVICE_CHATTER,
109 	WMI_SERVICE_COEX_FREQAVOID,
110 	WMI_SERVICE_PACKET_POWER_SAVE,
111 	WMI_SERVICE_FORCE_FW_HANG,
112 	WMI_SERVICE_GPIO,
113 	WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM,
114 	WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG,
115 	WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG,
116 	WMI_SERVICE_STA_KEEP_ALIVE,
117 	WMI_SERVICE_TX_ENCAP,
118 	WMI_SERVICE_BURST,
119 	WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT,
120 	WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT,
121 	WMI_SERVICE_ROAM_SCAN_OFFLOAD,
122 	WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC,
123 	WMI_SERVICE_EARLY_RX,
124 	WMI_SERVICE_STA_SMPS,
125 	WMI_SERVICE_FWTEST,
126 	WMI_SERVICE_STA_WMMAC,
127 	WMI_SERVICE_TDLS,
128 	WMI_SERVICE_MCC_BCN_INTERVAL_CHANGE,
129 	WMI_SERVICE_ADAPTIVE_OCS,
130 	WMI_SERVICE_BA_SSN_SUPPORT,
131 	WMI_SERVICE_FILTER_IPSEC_NATKEEPALIVE,
132 	WMI_SERVICE_WLAN_HB,
133 	WMI_SERVICE_LTE_ANT_SHARE_SUPPORT,
134 	WMI_SERVICE_BATCH_SCAN,
135 	WMI_SERVICE_QPOWER,
136 	WMI_SERVICE_PLMREQ,
137 	WMI_SERVICE_THERMAL_MGMT,
138 	WMI_SERVICE_RMC,
139 	WMI_SERVICE_MHF_OFFLOAD,
140 	WMI_SERVICE_COEX_SAR,
141 	WMI_SERVICE_BCN_TXRATE_OVERRIDE,
142 	WMI_SERVICE_NAN,
143 	WMI_SERVICE_L1SS_STAT,
144 	WMI_SERVICE_ESTIMATE_LINKSPEED,
145 	WMI_SERVICE_OBSS_SCAN,
146 	WMI_SERVICE_TDLS_OFFCHAN,
147 	WMI_SERVICE_TDLS_UAPSD_BUFFER_STA,
148 	WMI_SERVICE_TDLS_UAPSD_SLEEP_STA,
149 	WMI_SERVICE_IBSS_PWRSAVE,
150 	WMI_SERVICE_LPASS,
151 	WMI_SERVICE_EXTSCAN,
152 	WMI_SERVICE_D0WOW,
153 	WMI_SERVICE_HSOFFLOAD,
154 	WMI_SERVICE_ROAM_HO_OFFLOAD,
155 	WMI_SERVICE_RX_FULL_REORDER,
156 	WMI_SERVICE_DHCP_OFFLOAD,
157 	WMI_SERVICE_STA_RX_IPA_OFFLOAD_SUPPORT,
158 	WMI_SERVICE_MDNS_OFFLOAD,
159 	WMI_SERVICE_SAP_AUTH_OFFLOAD,
160 	WMI_SERVICE_ATF,
161 	WMI_SERVICE_COEX_GPIO,
162 	WMI_SERVICE_ENHANCED_PROXY_STA,
163 	WMI_SERVICE_TT,
164 	WMI_SERVICE_PEER_CACHING,
165 	WMI_SERVICE_AUX_SPECTRAL_INTF,
166 	WMI_SERVICE_AUX_CHAN_LOAD_INTF,
167 	WMI_SERVICE_BSS_CHANNEL_INFO_64,
168 	WMI_SERVICE_EXT_RES_CFG_SUPPORT,
169 	WMI_SERVICE_MESH_11S,
170 	WMI_SERVICE_MESH_NON_11S,
171 	WMI_SERVICE_PEER_STATS,
172 	WMI_SERVICE_RESTRT_CHNL_SUPPORT,
173 	WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT,
174 	WMI_SERVICE_TX_MODE_PUSH_ONLY,
175 	WMI_SERVICE_TX_MODE_PUSH_PULL,
176 	WMI_SERVICE_TX_MODE_DYNAMIC,
177 	WMI_SERVICE_VDEV_RX_FILTER,
178 	WMI_SERVICE_BTCOEX,
179 	WMI_SERVICE_CHECK_CAL_VERSION,
180 	WMI_SERVICE_DBGLOG_WARN2,
181 	WMI_SERVICE_BTCOEX_DUTY_CYCLE,
182 	WMI_SERVICE_4_WIRE_COEX_SUPPORT,
183 	WMI_SERVICE_EXTENDED_NSS_SUPPORT,
184 	WMI_SERVICE_PROG_GPIO_BAND_SELECT,
185 	WMI_SERVICE_SMART_LOGGING_SUPPORT,
186 	WMI_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE,
187 	WMI_SERVICE_TDLS_EXPLICIT_MODE_ONLY,
188 	WMI_SERVICE_MGMT_TX_WMI,
189 	WMI_SERVICE_TDLS_WIDER_BANDWIDTH,
190 	WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS,
191 	WMI_SERVICE_HOST_DFS_CHECK_SUPPORT,
192 	WMI_SERVICE_TPC_STATS_FINAL,
193 	WMI_SERVICE_RESET_CHIP,
194 	WMI_SERVICE_SPOOF_MAC_SUPPORT,
195 	WMI_SERVICE_TX_DATA_ACK_RSSI,
196 	WMI_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT,
197 	WMI_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT,
198 	WMI_SERVICE_BB_TIMING_CONFIG_SUPPORT,
199 	WMI_SERVICE_THERM_THROT,
200 	WMI_SERVICE_RTT_RESPONDER_ROLE,
201 	WMI_SERVICE_PER_PACKET_SW_ENCRYPT,
202 	WMI_SERVICE_REPORT_AIRTIME,
203 	WMI_SERVICE_SYNC_DELETE_CMDS,
204 	WMI_SERVICE_TX_PWR_PER_PEER,
205 	WMI_SERVICE_SUPPORT_EXTEND_ADDRESS,
206 	WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT,
207 	WMI_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT,
208 
209 	/* Remember to add the new value to wmi_service_name()! */
210 
211 	/* keep last */
212 	WMI_SERVICE_MAX,
213 };
214 
215 enum wmi_10x_service {
216 	WMI_10X_SERVICE_BEACON_OFFLOAD = 0,
217 	WMI_10X_SERVICE_SCAN_OFFLOAD,
218 	WMI_10X_SERVICE_ROAM_OFFLOAD,
219 	WMI_10X_SERVICE_BCN_MISS_OFFLOAD,
220 	WMI_10X_SERVICE_STA_PWRSAVE,
221 	WMI_10X_SERVICE_STA_ADVANCED_PWRSAVE,
222 	WMI_10X_SERVICE_AP_UAPSD,
223 	WMI_10X_SERVICE_AP_DFS,
224 	WMI_10X_SERVICE_11AC,
225 	WMI_10X_SERVICE_BLOCKACK,
226 	WMI_10X_SERVICE_PHYERR,
227 	WMI_10X_SERVICE_BCN_FILTER,
228 	WMI_10X_SERVICE_RTT,
229 	WMI_10X_SERVICE_RATECTRL,
230 	WMI_10X_SERVICE_WOW,
231 	WMI_10X_SERVICE_RATECTRL_CACHE,
232 	WMI_10X_SERVICE_IRAM_TIDS,
233 	WMI_10X_SERVICE_BURST,
234 
235 	/* introduced in 10.2 */
236 	WMI_10X_SERVICE_SMART_ANTENNA_SW_SUPPORT,
237 	WMI_10X_SERVICE_FORCE_FW_HANG,
238 	WMI_10X_SERVICE_SMART_ANTENNA_HW_SUPPORT,
239 	WMI_10X_SERVICE_ATF,
240 	WMI_10X_SERVICE_COEX_GPIO,
241 	WMI_10X_SERVICE_AUX_SPECTRAL_INTF,
242 	WMI_10X_SERVICE_AUX_CHAN_LOAD_INTF,
243 	WMI_10X_SERVICE_BSS_CHANNEL_INFO_64,
244 	WMI_10X_SERVICE_MESH,
245 	WMI_10X_SERVICE_EXT_RES_CFG_SUPPORT,
246 	WMI_10X_SERVICE_PEER_STATS,
247 	WMI_10X_SERVICE_RESET_CHIP,
248 	WMI_10X_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS,
249 	WMI_10X_SERVICE_VDEV_BCN_RATE_CONTROL,
250 	WMI_10X_SERVICE_PER_PACKET_SW_ENCRYPT,
251 	WMI_10X_SERVICE_BB_TIMING_CONFIG_SUPPORT,
252 };
253 
254 enum wmi_main_service {
255 	WMI_MAIN_SERVICE_BEACON_OFFLOAD = 0,
256 	WMI_MAIN_SERVICE_SCAN_OFFLOAD,
257 	WMI_MAIN_SERVICE_ROAM_OFFLOAD,
258 	WMI_MAIN_SERVICE_BCN_MISS_OFFLOAD,
259 	WMI_MAIN_SERVICE_STA_PWRSAVE,
260 	WMI_MAIN_SERVICE_STA_ADVANCED_PWRSAVE,
261 	WMI_MAIN_SERVICE_AP_UAPSD,
262 	WMI_MAIN_SERVICE_AP_DFS,
263 	WMI_MAIN_SERVICE_11AC,
264 	WMI_MAIN_SERVICE_BLOCKACK,
265 	WMI_MAIN_SERVICE_PHYERR,
266 	WMI_MAIN_SERVICE_BCN_FILTER,
267 	WMI_MAIN_SERVICE_RTT,
268 	WMI_MAIN_SERVICE_RATECTRL,
269 	WMI_MAIN_SERVICE_WOW,
270 	WMI_MAIN_SERVICE_RATECTRL_CACHE,
271 	WMI_MAIN_SERVICE_IRAM_TIDS,
272 	WMI_MAIN_SERVICE_ARPNS_OFFLOAD,
273 	WMI_MAIN_SERVICE_NLO,
274 	WMI_MAIN_SERVICE_GTK_OFFLOAD,
275 	WMI_MAIN_SERVICE_SCAN_SCH,
276 	WMI_MAIN_SERVICE_CSA_OFFLOAD,
277 	WMI_MAIN_SERVICE_CHATTER,
278 	WMI_MAIN_SERVICE_COEX_FREQAVOID,
279 	WMI_MAIN_SERVICE_PACKET_POWER_SAVE,
280 	WMI_MAIN_SERVICE_FORCE_FW_HANG,
281 	WMI_MAIN_SERVICE_GPIO,
282 	WMI_MAIN_SERVICE_STA_DTIM_PS_MODULATED_DTIM,
283 	WMI_MAIN_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG,
284 	WMI_MAIN_SERVICE_STA_UAPSD_VAR_AUTO_TRIG,
285 	WMI_MAIN_SERVICE_STA_KEEP_ALIVE,
286 	WMI_MAIN_SERVICE_TX_ENCAP,
287 };
288 
289 enum wmi_10_4_service {
290 	WMI_10_4_SERVICE_BEACON_OFFLOAD = 0,
291 	WMI_10_4_SERVICE_SCAN_OFFLOAD,
292 	WMI_10_4_SERVICE_ROAM_OFFLOAD,
293 	WMI_10_4_SERVICE_BCN_MISS_OFFLOAD,
294 	WMI_10_4_SERVICE_STA_PWRSAVE,
295 	WMI_10_4_SERVICE_STA_ADVANCED_PWRSAVE,
296 	WMI_10_4_SERVICE_AP_UAPSD,
297 	WMI_10_4_SERVICE_AP_DFS,
298 	WMI_10_4_SERVICE_11AC,
299 	WMI_10_4_SERVICE_BLOCKACK,
300 	WMI_10_4_SERVICE_PHYERR,
301 	WMI_10_4_SERVICE_BCN_FILTER,
302 	WMI_10_4_SERVICE_RTT,
303 	WMI_10_4_SERVICE_RATECTRL,
304 	WMI_10_4_SERVICE_WOW,
305 	WMI_10_4_SERVICE_RATECTRL_CACHE,
306 	WMI_10_4_SERVICE_IRAM_TIDS,
307 	WMI_10_4_SERVICE_BURST,
308 	WMI_10_4_SERVICE_SMART_ANTENNA_SW_SUPPORT,
309 	WMI_10_4_SERVICE_GTK_OFFLOAD,
310 	WMI_10_4_SERVICE_SCAN_SCH,
311 	WMI_10_4_SERVICE_CSA_OFFLOAD,
312 	WMI_10_4_SERVICE_CHATTER,
313 	WMI_10_4_SERVICE_COEX_FREQAVOID,
314 	WMI_10_4_SERVICE_PACKET_POWER_SAVE,
315 	WMI_10_4_SERVICE_FORCE_FW_HANG,
316 	WMI_10_4_SERVICE_SMART_ANTENNA_HW_SUPPORT,
317 	WMI_10_4_SERVICE_GPIO,
318 	WMI_10_4_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG,
319 	WMI_10_4_SERVICE_STA_UAPSD_VAR_AUTO_TRIG,
320 	WMI_10_4_SERVICE_STA_KEEP_ALIVE,
321 	WMI_10_4_SERVICE_TX_ENCAP,
322 	WMI_10_4_SERVICE_AP_PS_DETECT_OUT_OF_SYNC,
323 	WMI_10_4_SERVICE_EARLY_RX,
324 	WMI_10_4_SERVICE_ENHANCED_PROXY_STA,
325 	WMI_10_4_SERVICE_TT,
326 	WMI_10_4_SERVICE_ATF,
327 	WMI_10_4_SERVICE_PEER_CACHING,
328 	WMI_10_4_SERVICE_COEX_GPIO,
329 	WMI_10_4_SERVICE_AUX_SPECTRAL_INTF,
330 	WMI_10_4_SERVICE_AUX_CHAN_LOAD_INTF,
331 	WMI_10_4_SERVICE_BSS_CHANNEL_INFO_64,
332 	WMI_10_4_SERVICE_EXT_RES_CFG_SUPPORT,
333 	WMI_10_4_SERVICE_MESH_NON_11S,
334 	WMI_10_4_SERVICE_RESTRT_CHNL_SUPPORT,
335 	WMI_10_4_SERVICE_PEER_STATS,
336 	WMI_10_4_SERVICE_MESH_11S,
337 	WMI_10_4_SERVICE_PERIODIC_CHAN_STAT_SUPPORT,
338 	WMI_10_4_SERVICE_TX_MODE_PUSH_ONLY,
339 	WMI_10_4_SERVICE_TX_MODE_PUSH_PULL,
340 	WMI_10_4_SERVICE_TX_MODE_DYNAMIC,
341 	WMI_10_4_SERVICE_VDEV_RX_FILTER,
342 	WMI_10_4_SERVICE_BTCOEX,
343 	WMI_10_4_SERVICE_CHECK_CAL_VERSION,
344 	WMI_10_4_SERVICE_DBGLOG_WARN2,
345 	WMI_10_4_SERVICE_BTCOEX_DUTY_CYCLE,
346 	WMI_10_4_SERVICE_4_WIRE_COEX_SUPPORT,
347 	WMI_10_4_SERVICE_EXTENDED_NSS_SUPPORT,
348 	WMI_10_4_SERVICE_PROG_GPIO_BAND_SELECT,
349 	WMI_10_4_SERVICE_SMART_LOGGING_SUPPORT,
350 	WMI_10_4_SERVICE_TDLS,
351 	WMI_10_4_SERVICE_TDLS_OFFCHAN,
352 	WMI_10_4_SERVICE_TDLS_UAPSD_BUFFER_STA,
353 	WMI_10_4_SERVICE_TDLS_UAPSD_SLEEP_STA,
354 	WMI_10_4_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE,
355 	WMI_10_4_SERVICE_TDLS_EXPLICIT_MODE_ONLY,
356 	WMI_10_4_SERVICE_TDLS_WIDER_BANDWIDTH,
357 	WMI_10_4_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS,
358 	WMI_10_4_SERVICE_HOST_DFS_CHECK_SUPPORT,
359 	WMI_10_4_SERVICE_TPC_STATS_FINAL,
360 	WMI_10_4_SERVICE_CFR_CAPTURE_SUPPORT,
361 	WMI_10_4_SERVICE_TX_DATA_ACK_RSSI,
362 	WMI_10_4_SERVICE_CFR_CAPTURE_IND_MSG_TYPE_LEGACY,
363 	WMI_10_4_SERVICE_PER_PACKET_SW_ENCRYPT,
364 	WMI_10_4_SERVICE_PEER_TID_CONFIGS_SUPPORT,
365 	WMI_10_4_SERVICE_VDEV_BCN_RATE_CONTROL,
366 	WMI_10_4_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT,
367 	WMI_10_4_SERVICE_HTT_ASSERT_TRIGGER_SUPPORT,
368 	WMI_10_4_SERVICE_VDEV_FILTER_NEIGHBOR_RX_PACKETS,
369 	WMI_10_4_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT,
370 	WMI_10_4_SERVICE_PEER_CHWIDTH_CHANGE,
371 	WMI_10_4_SERVICE_RX_FILTER_OUT_COUNT,
372 	WMI_10_4_SERVICE_RTT_RESPONDER_ROLE,
373 	WMI_10_4_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT,
374 	WMI_10_4_SERVICE_REPORT_AIRTIME,
375 	WMI_10_4_SERVICE_TX_PWR_PER_PEER,
376 	WMI_10_4_SERVICE_FETCH_PEER_TX_PN,
377 	WMI_10_4_SERVICE_MULTIPLE_VDEV_RESTART,
378 	WMI_10_4_SERVICE_ENHANCED_RADIO_COUNTERS,
379 	WMI_10_4_SERVICE_QINQ_SUPPORT,
380 	WMI_10_4_SERVICE_RESET_CHIP,
381 };
382 
wmi_service_name(enum wmi_service service_id)383 static inline char *wmi_service_name(enum wmi_service service_id)
384 {
385 #define SVCSTR(x) case x: return #x
386 
387 	switch (service_id) {
388 	SVCSTR(WMI_SERVICE_BEACON_OFFLOAD);
389 	SVCSTR(WMI_SERVICE_SCAN_OFFLOAD);
390 	SVCSTR(WMI_SERVICE_ROAM_OFFLOAD);
391 	SVCSTR(WMI_SERVICE_BCN_MISS_OFFLOAD);
392 	SVCSTR(WMI_SERVICE_STA_PWRSAVE);
393 	SVCSTR(WMI_SERVICE_STA_ADVANCED_PWRSAVE);
394 	SVCSTR(WMI_SERVICE_AP_UAPSD);
395 	SVCSTR(WMI_SERVICE_AP_DFS);
396 	SVCSTR(WMI_SERVICE_11AC);
397 	SVCSTR(WMI_SERVICE_BLOCKACK);
398 	SVCSTR(WMI_SERVICE_PHYERR);
399 	SVCSTR(WMI_SERVICE_BCN_FILTER);
400 	SVCSTR(WMI_SERVICE_RTT);
401 	SVCSTR(WMI_SERVICE_RATECTRL);
402 	SVCSTR(WMI_SERVICE_WOW);
403 	SVCSTR(WMI_SERVICE_RATECTRL_CACHE);
404 	SVCSTR(WMI_SERVICE_IRAM_TIDS);
405 	SVCSTR(WMI_SERVICE_ARPNS_OFFLOAD);
406 	SVCSTR(WMI_SERVICE_NLO);
407 	SVCSTR(WMI_SERVICE_GTK_OFFLOAD);
408 	SVCSTR(WMI_SERVICE_SCAN_SCH);
409 	SVCSTR(WMI_SERVICE_CSA_OFFLOAD);
410 	SVCSTR(WMI_SERVICE_CHATTER);
411 	SVCSTR(WMI_SERVICE_COEX_FREQAVOID);
412 	SVCSTR(WMI_SERVICE_PACKET_POWER_SAVE);
413 	SVCSTR(WMI_SERVICE_FORCE_FW_HANG);
414 	SVCSTR(WMI_SERVICE_GPIO);
415 	SVCSTR(WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM);
416 	SVCSTR(WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG);
417 	SVCSTR(WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG);
418 	SVCSTR(WMI_SERVICE_STA_KEEP_ALIVE);
419 	SVCSTR(WMI_SERVICE_TX_ENCAP);
420 	SVCSTR(WMI_SERVICE_BURST);
421 	SVCSTR(WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT);
422 	SVCSTR(WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT);
423 	SVCSTR(WMI_SERVICE_ROAM_SCAN_OFFLOAD);
424 	SVCSTR(WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC);
425 	SVCSTR(WMI_SERVICE_EARLY_RX);
426 	SVCSTR(WMI_SERVICE_STA_SMPS);
427 	SVCSTR(WMI_SERVICE_FWTEST);
428 	SVCSTR(WMI_SERVICE_STA_WMMAC);
429 	SVCSTR(WMI_SERVICE_TDLS);
430 	SVCSTR(WMI_SERVICE_MCC_BCN_INTERVAL_CHANGE);
431 	SVCSTR(WMI_SERVICE_ADAPTIVE_OCS);
432 	SVCSTR(WMI_SERVICE_BA_SSN_SUPPORT);
433 	SVCSTR(WMI_SERVICE_FILTER_IPSEC_NATKEEPALIVE);
434 	SVCSTR(WMI_SERVICE_WLAN_HB);
435 	SVCSTR(WMI_SERVICE_LTE_ANT_SHARE_SUPPORT);
436 	SVCSTR(WMI_SERVICE_BATCH_SCAN);
437 	SVCSTR(WMI_SERVICE_QPOWER);
438 	SVCSTR(WMI_SERVICE_PLMREQ);
439 	SVCSTR(WMI_SERVICE_THERMAL_MGMT);
440 	SVCSTR(WMI_SERVICE_RMC);
441 	SVCSTR(WMI_SERVICE_MHF_OFFLOAD);
442 	SVCSTR(WMI_SERVICE_COEX_SAR);
443 	SVCSTR(WMI_SERVICE_BCN_TXRATE_OVERRIDE);
444 	SVCSTR(WMI_SERVICE_NAN);
445 	SVCSTR(WMI_SERVICE_L1SS_STAT);
446 	SVCSTR(WMI_SERVICE_ESTIMATE_LINKSPEED);
447 	SVCSTR(WMI_SERVICE_OBSS_SCAN);
448 	SVCSTR(WMI_SERVICE_TDLS_OFFCHAN);
449 	SVCSTR(WMI_SERVICE_TDLS_UAPSD_BUFFER_STA);
450 	SVCSTR(WMI_SERVICE_TDLS_UAPSD_SLEEP_STA);
451 	SVCSTR(WMI_SERVICE_IBSS_PWRSAVE);
452 	SVCSTR(WMI_SERVICE_LPASS);
453 	SVCSTR(WMI_SERVICE_EXTSCAN);
454 	SVCSTR(WMI_SERVICE_D0WOW);
455 	SVCSTR(WMI_SERVICE_HSOFFLOAD);
456 	SVCSTR(WMI_SERVICE_ROAM_HO_OFFLOAD);
457 	SVCSTR(WMI_SERVICE_RX_FULL_REORDER);
458 	SVCSTR(WMI_SERVICE_DHCP_OFFLOAD);
459 	SVCSTR(WMI_SERVICE_STA_RX_IPA_OFFLOAD_SUPPORT);
460 	SVCSTR(WMI_SERVICE_MDNS_OFFLOAD);
461 	SVCSTR(WMI_SERVICE_SAP_AUTH_OFFLOAD);
462 	SVCSTR(WMI_SERVICE_ATF);
463 	SVCSTR(WMI_SERVICE_COEX_GPIO);
464 	SVCSTR(WMI_SERVICE_ENHANCED_PROXY_STA);
465 	SVCSTR(WMI_SERVICE_TT);
466 	SVCSTR(WMI_SERVICE_PEER_CACHING);
467 	SVCSTR(WMI_SERVICE_AUX_SPECTRAL_INTF);
468 	SVCSTR(WMI_SERVICE_AUX_CHAN_LOAD_INTF);
469 	SVCSTR(WMI_SERVICE_BSS_CHANNEL_INFO_64);
470 	SVCSTR(WMI_SERVICE_EXT_RES_CFG_SUPPORT);
471 	SVCSTR(WMI_SERVICE_MESH_11S);
472 	SVCSTR(WMI_SERVICE_MESH_NON_11S);
473 	SVCSTR(WMI_SERVICE_PEER_STATS);
474 	SVCSTR(WMI_SERVICE_RESTRT_CHNL_SUPPORT);
475 	SVCSTR(WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT);
476 	SVCSTR(WMI_SERVICE_TX_MODE_PUSH_ONLY);
477 	SVCSTR(WMI_SERVICE_TX_MODE_PUSH_PULL);
478 	SVCSTR(WMI_SERVICE_TX_MODE_DYNAMIC);
479 	SVCSTR(WMI_SERVICE_VDEV_RX_FILTER);
480 	SVCSTR(WMI_SERVICE_BTCOEX);
481 	SVCSTR(WMI_SERVICE_CHECK_CAL_VERSION);
482 	SVCSTR(WMI_SERVICE_DBGLOG_WARN2);
483 	SVCSTR(WMI_SERVICE_BTCOEX_DUTY_CYCLE);
484 	SVCSTR(WMI_SERVICE_4_WIRE_COEX_SUPPORT);
485 	SVCSTR(WMI_SERVICE_EXTENDED_NSS_SUPPORT);
486 	SVCSTR(WMI_SERVICE_PROG_GPIO_BAND_SELECT);
487 	SVCSTR(WMI_SERVICE_SMART_LOGGING_SUPPORT);
488 	SVCSTR(WMI_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE);
489 	SVCSTR(WMI_SERVICE_TDLS_EXPLICIT_MODE_ONLY);
490 	SVCSTR(WMI_SERVICE_MGMT_TX_WMI);
491 	SVCSTR(WMI_SERVICE_TDLS_WIDER_BANDWIDTH);
492 	SVCSTR(WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS);
493 	SVCSTR(WMI_SERVICE_HOST_DFS_CHECK_SUPPORT);
494 	SVCSTR(WMI_SERVICE_TPC_STATS_FINAL);
495 	SVCSTR(WMI_SERVICE_RESET_CHIP);
496 	SVCSTR(WMI_SERVICE_SPOOF_MAC_SUPPORT);
497 	SVCSTR(WMI_SERVICE_TX_DATA_ACK_RSSI);
498 	SVCSTR(WMI_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT);
499 	SVCSTR(WMI_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT);
500 	SVCSTR(WMI_SERVICE_BB_TIMING_CONFIG_SUPPORT);
501 	SVCSTR(WMI_SERVICE_THERM_THROT);
502 	SVCSTR(WMI_SERVICE_RTT_RESPONDER_ROLE);
503 	SVCSTR(WMI_SERVICE_PER_PACKET_SW_ENCRYPT);
504 	SVCSTR(WMI_SERVICE_REPORT_AIRTIME);
505 	SVCSTR(WMI_SERVICE_SYNC_DELETE_CMDS);
506 	SVCSTR(WMI_SERVICE_TX_PWR_PER_PEER);
507 	SVCSTR(WMI_SERVICE_SUPPORT_EXTEND_ADDRESS);
508 	SVCSTR(WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT);
509 	SVCSTR(WMI_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT);
510 
511 	case WMI_SERVICE_MAX:
512 		return NULL;
513 	}
514 
515 #undef SVCSTR
516 
517 	return NULL;
518 }
519 
520 #define WMI_SERVICE_IS_ENABLED(wmi_svc_bmap, svc_id, len) \
521 	((svc_id) < (len) && \
522 	 __le32_to_cpu((wmi_svc_bmap)[(svc_id) / (sizeof(u32))]) & \
523 	 BIT((svc_id) % (sizeof(u32))))
524 
525 /* This extension is required to accommodate new services, current limit
526  * for wmi_services is 64 as target is using only 4-bits of each 32-bit
527  * wmi_service word. Extending this to make use of remaining unused bits
528  * for new services.
529  */
530 #define WMI_EXT_SERVICE_IS_ENABLED(wmi_svc_bmap, svc_id, len) \
531 	((svc_id) >= (len) && \
532 	__le32_to_cpu((wmi_svc_bmap)[((svc_id) - (len)) / 28]) & \
533 	BIT(((((svc_id) - (len)) % 28) & 0x1f) + 4))
534 
535 #define SVCMAP(x, y, len) \
536 	do { \
537 		if ((WMI_SERVICE_IS_ENABLED((in), (x), (len))) || \
538 		    (WMI_EXT_SERVICE_IS_ENABLED((in), (x), (len)))) \
539 			__set_bit(y, out); \
540 	} while (0)
541 
wmi_10x_svc_map(const __le32 * in,unsigned long * out,size_t len)542 static inline void wmi_10x_svc_map(const __le32 *in, unsigned long *out,
543 				   size_t len)
544 {
545 	SVCMAP(WMI_10X_SERVICE_BEACON_OFFLOAD,
546 	       WMI_SERVICE_BEACON_OFFLOAD, len);
547 	SVCMAP(WMI_10X_SERVICE_SCAN_OFFLOAD,
548 	       WMI_SERVICE_SCAN_OFFLOAD, len);
549 	SVCMAP(WMI_10X_SERVICE_ROAM_OFFLOAD,
550 	       WMI_SERVICE_ROAM_OFFLOAD, len);
551 	SVCMAP(WMI_10X_SERVICE_BCN_MISS_OFFLOAD,
552 	       WMI_SERVICE_BCN_MISS_OFFLOAD, len);
553 	SVCMAP(WMI_10X_SERVICE_STA_PWRSAVE,
554 	       WMI_SERVICE_STA_PWRSAVE, len);
555 	SVCMAP(WMI_10X_SERVICE_STA_ADVANCED_PWRSAVE,
556 	       WMI_SERVICE_STA_ADVANCED_PWRSAVE, len);
557 	SVCMAP(WMI_10X_SERVICE_AP_UAPSD,
558 	       WMI_SERVICE_AP_UAPSD, len);
559 	SVCMAP(WMI_10X_SERVICE_AP_DFS,
560 	       WMI_SERVICE_AP_DFS, len);
561 	SVCMAP(WMI_10X_SERVICE_11AC,
562 	       WMI_SERVICE_11AC, len);
563 	SVCMAP(WMI_10X_SERVICE_BLOCKACK,
564 	       WMI_SERVICE_BLOCKACK, len);
565 	SVCMAP(WMI_10X_SERVICE_PHYERR,
566 	       WMI_SERVICE_PHYERR, len);
567 	SVCMAP(WMI_10X_SERVICE_BCN_FILTER,
568 	       WMI_SERVICE_BCN_FILTER, len);
569 	SVCMAP(WMI_10X_SERVICE_RTT,
570 	       WMI_SERVICE_RTT, len);
571 	SVCMAP(WMI_10X_SERVICE_RATECTRL,
572 	       WMI_SERVICE_RATECTRL, len);
573 	SVCMAP(WMI_10X_SERVICE_WOW,
574 	       WMI_SERVICE_WOW, len);
575 	SVCMAP(WMI_10X_SERVICE_RATECTRL_CACHE,
576 	       WMI_SERVICE_RATECTRL_CACHE, len);
577 	SVCMAP(WMI_10X_SERVICE_IRAM_TIDS,
578 	       WMI_SERVICE_IRAM_TIDS, len);
579 	SVCMAP(WMI_10X_SERVICE_BURST,
580 	       WMI_SERVICE_BURST, len);
581 	SVCMAP(WMI_10X_SERVICE_SMART_ANTENNA_SW_SUPPORT,
582 	       WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT, len);
583 	SVCMAP(WMI_10X_SERVICE_FORCE_FW_HANG,
584 	       WMI_SERVICE_FORCE_FW_HANG, len);
585 	SVCMAP(WMI_10X_SERVICE_SMART_ANTENNA_HW_SUPPORT,
586 	       WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT, len);
587 	SVCMAP(WMI_10X_SERVICE_ATF,
588 	       WMI_SERVICE_ATF, len);
589 	SVCMAP(WMI_10X_SERVICE_COEX_GPIO,
590 	       WMI_SERVICE_COEX_GPIO, len);
591 	SVCMAP(WMI_10X_SERVICE_AUX_SPECTRAL_INTF,
592 	       WMI_SERVICE_AUX_SPECTRAL_INTF, len);
593 	SVCMAP(WMI_10X_SERVICE_AUX_CHAN_LOAD_INTF,
594 	       WMI_SERVICE_AUX_CHAN_LOAD_INTF, len);
595 	SVCMAP(WMI_10X_SERVICE_BSS_CHANNEL_INFO_64,
596 	       WMI_SERVICE_BSS_CHANNEL_INFO_64, len);
597 	SVCMAP(WMI_10X_SERVICE_MESH,
598 	       WMI_SERVICE_MESH_11S, len);
599 	SVCMAP(WMI_10X_SERVICE_EXT_RES_CFG_SUPPORT,
600 	       WMI_SERVICE_EXT_RES_CFG_SUPPORT, len);
601 	SVCMAP(WMI_10X_SERVICE_PEER_STATS,
602 	       WMI_SERVICE_PEER_STATS, len);
603 	SVCMAP(WMI_10X_SERVICE_RESET_CHIP,
604 	       WMI_SERVICE_RESET_CHIP, len);
605 	SVCMAP(WMI_10X_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS,
606 	       WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, len);
607 	SVCMAP(WMI_10X_SERVICE_BB_TIMING_CONFIG_SUPPORT,
608 	       WMI_SERVICE_BB_TIMING_CONFIG_SUPPORT, len);
609 	SVCMAP(WMI_10X_SERVICE_PER_PACKET_SW_ENCRYPT,
610 	       WMI_SERVICE_PER_PACKET_SW_ENCRYPT, len);
611 }
612 
wmi_main_svc_map(const __le32 * in,unsigned long * out,size_t len)613 static inline void wmi_main_svc_map(const __le32 *in, unsigned long *out,
614 				    size_t len)
615 {
616 	SVCMAP(WMI_MAIN_SERVICE_BEACON_OFFLOAD,
617 	       WMI_SERVICE_BEACON_OFFLOAD, len);
618 	SVCMAP(WMI_MAIN_SERVICE_SCAN_OFFLOAD,
619 	       WMI_SERVICE_SCAN_OFFLOAD, len);
620 	SVCMAP(WMI_MAIN_SERVICE_ROAM_OFFLOAD,
621 	       WMI_SERVICE_ROAM_OFFLOAD, len);
622 	SVCMAP(WMI_MAIN_SERVICE_BCN_MISS_OFFLOAD,
623 	       WMI_SERVICE_BCN_MISS_OFFLOAD, len);
624 	SVCMAP(WMI_MAIN_SERVICE_STA_PWRSAVE,
625 	       WMI_SERVICE_STA_PWRSAVE, len);
626 	SVCMAP(WMI_MAIN_SERVICE_STA_ADVANCED_PWRSAVE,
627 	       WMI_SERVICE_STA_ADVANCED_PWRSAVE, len);
628 	SVCMAP(WMI_MAIN_SERVICE_AP_UAPSD,
629 	       WMI_SERVICE_AP_UAPSD, len);
630 	SVCMAP(WMI_MAIN_SERVICE_AP_DFS,
631 	       WMI_SERVICE_AP_DFS, len);
632 	SVCMAP(WMI_MAIN_SERVICE_11AC,
633 	       WMI_SERVICE_11AC, len);
634 	SVCMAP(WMI_MAIN_SERVICE_BLOCKACK,
635 	       WMI_SERVICE_BLOCKACK, len);
636 	SVCMAP(WMI_MAIN_SERVICE_PHYERR,
637 	       WMI_SERVICE_PHYERR, len);
638 	SVCMAP(WMI_MAIN_SERVICE_BCN_FILTER,
639 	       WMI_SERVICE_BCN_FILTER, len);
640 	SVCMAP(WMI_MAIN_SERVICE_RTT,
641 	       WMI_SERVICE_RTT, len);
642 	SVCMAP(WMI_MAIN_SERVICE_RATECTRL,
643 	       WMI_SERVICE_RATECTRL, len);
644 	SVCMAP(WMI_MAIN_SERVICE_WOW,
645 	       WMI_SERVICE_WOW, len);
646 	SVCMAP(WMI_MAIN_SERVICE_RATECTRL_CACHE,
647 	       WMI_SERVICE_RATECTRL_CACHE, len);
648 	SVCMAP(WMI_MAIN_SERVICE_IRAM_TIDS,
649 	       WMI_SERVICE_IRAM_TIDS, len);
650 	SVCMAP(WMI_MAIN_SERVICE_ARPNS_OFFLOAD,
651 	       WMI_SERVICE_ARPNS_OFFLOAD, len);
652 	SVCMAP(WMI_MAIN_SERVICE_NLO,
653 	       WMI_SERVICE_NLO, len);
654 	SVCMAP(WMI_MAIN_SERVICE_GTK_OFFLOAD,
655 	       WMI_SERVICE_GTK_OFFLOAD, len);
656 	SVCMAP(WMI_MAIN_SERVICE_SCAN_SCH,
657 	       WMI_SERVICE_SCAN_SCH, len);
658 	SVCMAP(WMI_MAIN_SERVICE_CSA_OFFLOAD,
659 	       WMI_SERVICE_CSA_OFFLOAD, len);
660 	SVCMAP(WMI_MAIN_SERVICE_CHATTER,
661 	       WMI_SERVICE_CHATTER, len);
662 	SVCMAP(WMI_MAIN_SERVICE_COEX_FREQAVOID,
663 	       WMI_SERVICE_COEX_FREQAVOID, len);
664 	SVCMAP(WMI_MAIN_SERVICE_PACKET_POWER_SAVE,
665 	       WMI_SERVICE_PACKET_POWER_SAVE, len);
666 	SVCMAP(WMI_MAIN_SERVICE_FORCE_FW_HANG,
667 	       WMI_SERVICE_FORCE_FW_HANG, len);
668 	SVCMAP(WMI_MAIN_SERVICE_GPIO,
669 	       WMI_SERVICE_GPIO, len);
670 	SVCMAP(WMI_MAIN_SERVICE_STA_DTIM_PS_MODULATED_DTIM,
671 	       WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM, len);
672 	SVCMAP(WMI_MAIN_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG,
673 	       WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, len);
674 	SVCMAP(WMI_MAIN_SERVICE_STA_UAPSD_VAR_AUTO_TRIG,
675 	       WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, len);
676 	SVCMAP(WMI_MAIN_SERVICE_STA_KEEP_ALIVE,
677 	       WMI_SERVICE_STA_KEEP_ALIVE, len);
678 	SVCMAP(WMI_MAIN_SERVICE_TX_ENCAP,
679 	       WMI_SERVICE_TX_ENCAP, len);
680 }
681 
wmi_10_4_svc_map(const __le32 * in,unsigned long * out,size_t len)682 static inline void wmi_10_4_svc_map(const __le32 *in, unsigned long *out,
683 				    size_t len)
684 {
685 	SVCMAP(WMI_10_4_SERVICE_BEACON_OFFLOAD,
686 	       WMI_SERVICE_BEACON_OFFLOAD, len);
687 	SVCMAP(WMI_10_4_SERVICE_SCAN_OFFLOAD,
688 	       WMI_SERVICE_SCAN_OFFLOAD, len);
689 	SVCMAP(WMI_10_4_SERVICE_ROAM_OFFLOAD,
690 	       WMI_SERVICE_ROAM_OFFLOAD, len);
691 	SVCMAP(WMI_10_4_SERVICE_BCN_MISS_OFFLOAD,
692 	       WMI_SERVICE_BCN_MISS_OFFLOAD, len);
693 	SVCMAP(WMI_10_4_SERVICE_STA_PWRSAVE,
694 	       WMI_SERVICE_STA_PWRSAVE, len);
695 	SVCMAP(WMI_10_4_SERVICE_STA_ADVANCED_PWRSAVE,
696 	       WMI_SERVICE_STA_ADVANCED_PWRSAVE, len);
697 	SVCMAP(WMI_10_4_SERVICE_AP_UAPSD,
698 	       WMI_SERVICE_AP_UAPSD, len);
699 	SVCMAP(WMI_10_4_SERVICE_AP_DFS,
700 	       WMI_SERVICE_AP_DFS, len);
701 	SVCMAP(WMI_10_4_SERVICE_11AC,
702 	       WMI_SERVICE_11AC, len);
703 	SVCMAP(WMI_10_4_SERVICE_BLOCKACK,
704 	       WMI_SERVICE_BLOCKACK, len);
705 	SVCMAP(WMI_10_4_SERVICE_PHYERR,
706 	       WMI_SERVICE_PHYERR, len);
707 	SVCMAP(WMI_10_4_SERVICE_BCN_FILTER,
708 	       WMI_SERVICE_BCN_FILTER, len);
709 	SVCMAP(WMI_10_4_SERVICE_RTT,
710 	       WMI_SERVICE_RTT, len);
711 	SVCMAP(WMI_10_4_SERVICE_RATECTRL,
712 	       WMI_SERVICE_RATECTRL, len);
713 	SVCMAP(WMI_10_4_SERVICE_WOW,
714 	       WMI_SERVICE_WOW, len);
715 	SVCMAP(WMI_10_4_SERVICE_RATECTRL_CACHE,
716 	       WMI_SERVICE_RATECTRL_CACHE, len);
717 	SVCMAP(WMI_10_4_SERVICE_IRAM_TIDS,
718 	       WMI_SERVICE_IRAM_TIDS, len);
719 	SVCMAP(WMI_10_4_SERVICE_BURST,
720 	       WMI_SERVICE_BURST, len);
721 	SVCMAP(WMI_10_4_SERVICE_SMART_ANTENNA_SW_SUPPORT,
722 	       WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT, len);
723 	SVCMAP(WMI_10_4_SERVICE_GTK_OFFLOAD,
724 	       WMI_SERVICE_GTK_OFFLOAD, len);
725 	SVCMAP(WMI_10_4_SERVICE_SCAN_SCH,
726 	       WMI_SERVICE_SCAN_SCH, len);
727 	SVCMAP(WMI_10_4_SERVICE_CSA_OFFLOAD,
728 	       WMI_SERVICE_CSA_OFFLOAD, len);
729 	SVCMAP(WMI_10_4_SERVICE_CHATTER,
730 	       WMI_SERVICE_CHATTER, len);
731 	SVCMAP(WMI_10_4_SERVICE_COEX_FREQAVOID,
732 	       WMI_SERVICE_COEX_FREQAVOID, len);
733 	SVCMAP(WMI_10_4_SERVICE_PACKET_POWER_SAVE,
734 	       WMI_SERVICE_PACKET_POWER_SAVE, len);
735 	SVCMAP(WMI_10_4_SERVICE_FORCE_FW_HANG,
736 	       WMI_SERVICE_FORCE_FW_HANG, len);
737 	SVCMAP(WMI_10_4_SERVICE_SMART_ANTENNA_HW_SUPPORT,
738 	       WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT, len);
739 	SVCMAP(WMI_10_4_SERVICE_GPIO,
740 	       WMI_SERVICE_GPIO, len);
741 	SVCMAP(WMI_10_4_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG,
742 	       WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, len);
743 	SVCMAP(WMI_10_4_SERVICE_STA_UAPSD_VAR_AUTO_TRIG,
744 	       WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, len);
745 	SVCMAP(WMI_10_4_SERVICE_STA_KEEP_ALIVE,
746 	       WMI_SERVICE_STA_KEEP_ALIVE, len);
747 	SVCMAP(WMI_10_4_SERVICE_TX_ENCAP,
748 	       WMI_SERVICE_TX_ENCAP, len);
749 	SVCMAP(WMI_10_4_SERVICE_AP_PS_DETECT_OUT_OF_SYNC,
750 	       WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC, len);
751 	SVCMAP(WMI_10_4_SERVICE_EARLY_RX,
752 	       WMI_SERVICE_EARLY_RX, len);
753 	SVCMAP(WMI_10_4_SERVICE_ENHANCED_PROXY_STA,
754 	       WMI_SERVICE_ENHANCED_PROXY_STA, len);
755 	SVCMAP(WMI_10_4_SERVICE_TT,
756 	       WMI_SERVICE_TT, len);
757 	SVCMAP(WMI_10_4_SERVICE_ATF,
758 	       WMI_SERVICE_ATF, len);
759 	SVCMAP(WMI_10_4_SERVICE_PEER_CACHING,
760 	       WMI_SERVICE_PEER_CACHING, len);
761 	SVCMAP(WMI_10_4_SERVICE_COEX_GPIO,
762 	       WMI_SERVICE_COEX_GPIO, len);
763 	SVCMAP(WMI_10_4_SERVICE_AUX_SPECTRAL_INTF,
764 	       WMI_SERVICE_AUX_SPECTRAL_INTF, len);
765 	SVCMAP(WMI_10_4_SERVICE_AUX_CHAN_LOAD_INTF,
766 	       WMI_SERVICE_AUX_CHAN_LOAD_INTF, len);
767 	SVCMAP(WMI_10_4_SERVICE_BSS_CHANNEL_INFO_64,
768 	       WMI_SERVICE_BSS_CHANNEL_INFO_64, len);
769 	SVCMAP(WMI_10_4_SERVICE_EXT_RES_CFG_SUPPORT,
770 	       WMI_SERVICE_EXT_RES_CFG_SUPPORT, len);
771 	SVCMAP(WMI_10_4_SERVICE_MESH_NON_11S,
772 	       WMI_SERVICE_MESH_NON_11S, len);
773 	SVCMAP(WMI_10_4_SERVICE_RESTRT_CHNL_SUPPORT,
774 	       WMI_SERVICE_RESTRT_CHNL_SUPPORT, len);
775 	SVCMAP(WMI_10_4_SERVICE_PEER_STATS,
776 	       WMI_SERVICE_PEER_STATS, len);
777 	SVCMAP(WMI_10_4_SERVICE_MESH_11S,
778 	       WMI_SERVICE_MESH_11S, len);
779 	SVCMAP(WMI_10_4_SERVICE_PERIODIC_CHAN_STAT_SUPPORT,
780 	       WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT, len);
781 	SVCMAP(WMI_10_4_SERVICE_TX_MODE_PUSH_ONLY,
782 	       WMI_SERVICE_TX_MODE_PUSH_ONLY, len);
783 	SVCMAP(WMI_10_4_SERVICE_TX_MODE_PUSH_PULL,
784 	       WMI_SERVICE_TX_MODE_PUSH_PULL, len);
785 	SVCMAP(WMI_10_4_SERVICE_TX_MODE_DYNAMIC,
786 	       WMI_SERVICE_TX_MODE_DYNAMIC, len);
787 	SVCMAP(WMI_10_4_SERVICE_VDEV_RX_FILTER,
788 	       WMI_SERVICE_VDEV_RX_FILTER, len);
789 	SVCMAP(WMI_10_4_SERVICE_BTCOEX,
790 	       WMI_SERVICE_BTCOEX, len);
791 	SVCMAP(WMI_10_4_SERVICE_CHECK_CAL_VERSION,
792 	       WMI_SERVICE_CHECK_CAL_VERSION, len);
793 	SVCMAP(WMI_10_4_SERVICE_DBGLOG_WARN2,
794 	       WMI_SERVICE_DBGLOG_WARN2, len);
795 	SVCMAP(WMI_10_4_SERVICE_BTCOEX_DUTY_CYCLE,
796 	       WMI_SERVICE_BTCOEX_DUTY_CYCLE, len);
797 	SVCMAP(WMI_10_4_SERVICE_4_WIRE_COEX_SUPPORT,
798 	       WMI_SERVICE_4_WIRE_COEX_SUPPORT, len);
799 	SVCMAP(WMI_10_4_SERVICE_EXTENDED_NSS_SUPPORT,
800 	       WMI_SERVICE_EXTENDED_NSS_SUPPORT, len);
801 	SVCMAP(WMI_10_4_SERVICE_PROG_GPIO_BAND_SELECT,
802 	       WMI_SERVICE_PROG_GPIO_BAND_SELECT, len);
803 	SVCMAP(WMI_10_4_SERVICE_SMART_LOGGING_SUPPORT,
804 	       WMI_SERVICE_SMART_LOGGING_SUPPORT, len);
805 	SVCMAP(WMI_10_4_SERVICE_TDLS,
806 	       WMI_SERVICE_TDLS, len);
807 	SVCMAP(WMI_10_4_SERVICE_TDLS_OFFCHAN,
808 	       WMI_SERVICE_TDLS_OFFCHAN, len);
809 	SVCMAP(WMI_10_4_SERVICE_TDLS_UAPSD_BUFFER_STA,
810 	       WMI_SERVICE_TDLS_UAPSD_BUFFER_STA, len);
811 	SVCMAP(WMI_10_4_SERVICE_TDLS_UAPSD_SLEEP_STA,
812 	       WMI_SERVICE_TDLS_UAPSD_SLEEP_STA, len);
813 	SVCMAP(WMI_10_4_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE,
814 	       WMI_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE, len);
815 	SVCMAP(WMI_10_4_SERVICE_TDLS_EXPLICIT_MODE_ONLY,
816 	       WMI_SERVICE_TDLS_EXPLICIT_MODE_ONLY, len);
817 	SVCMAP(WMI_10_4_SERVICE_TDLS_WIDER_BANDWIDTH,
818 	       WMI_SERVICE_TDLS_WIDER_BANDWIDTH, len);
819 	SVCMAP(WMI_10_4_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS,
820 	       WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, len);
821 	SVCMAP(WMI_10_4_SERVICE_HOST_DFS_CHECK_SUPPORT,
822 	       WMI_SERVICE_HOST_DFS_CHECK_SUPPORT, len);
823 	SVCMAP(WMI_10_4_SERVICE_TPC_STATS_FINAL,
824 	       WMI_SERVICE_TPC_STATS_FINAL, len);
825 	SVCMAP(WMI_10_4_SERVICE_TX_DATA_ACK_RSSI,
826 	       WMI_SERVICE_TX_DATA_ACK_RSSI, len);
827 	SVCMAP(WMI_10_4_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT,
828 	       WMI_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT, len);
829 	SVCMAP(WMI_10_4_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT,
830 	       WMI_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT, len);
831 	SVCMAP(WMI_10_4_SERVICE_RTT_RESPONDER_ROLE,
832 	       WMI_SERVICE_RTT_RESPONDER_ROLE, len);
833 	SVCMAP(WMI_10_4_SERVICE_PER_PACKET_SW_ENCRYPT,
834 	       WMI_SERVICE_PER_PACKET_SW_ENCRYPT, len);
835 	SVCMAP(WMI_10_4_SERVICE_REPORT_AIRTIME,
836 	       WMI_SERVICE_REPORT_AIRTIME, len);
837 	SVCMAP(WMI_10_4_SERVICE_TX_PWR_PER_PEER,
838 	       WMI_SERVICE_TX_PWR_PER_PEER, len);
839 	SVCMAP(WMI_10_4_SERVICE_RESET_CHIP,
840 	       WMI_SERVICE_RESET_CHIP, len);
841 	SVCMAP(WMI_10_4_SERVICE_PEER_TID_CONFIGS_SUPPORT,
842 	       WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT, len);
843 	SVCMAP(WMI_10_4_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT,
844 	       WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT, len);
845 }
846 
847 #undef SVCMAP
848 
849 /* 2 word representation of MAC addr */
850 struct wmi_mac_addr {
851 	union {
852 		u8 addr[6];
853 		struct {
854 			u32 word0;
855 			u32 word1;
856 		} __packed;
857 	} __packed;
858 } __packed;
859 
860 struct wmi_cmd_map {
861 	u32 init_cmdid;
862 	u32 start_scan_cmdid;
863 	u32 stop_scan_cmdid;
864 	u32 scan_chan_list_cmdid;
865 	u32 scan_sch_prio_tbl_cmdid;
866 	u32 scan_prob_req_oui_cmdid;
867 	u32 pdev_set_regdomain_cmdid;
868 	u32 pdev_set_channel_cmdid;
869 	u32 pdev_set_param_cmdid;
870 	u32 pdev_pktlog_enable_cmdid;
871 	u32 pdev_pktlog_disable_cmdid;
872 	u32 pdev_set_wmm_params_cmdid;
873 	u32 pdev_set_ht_cap_ie_cmdid;
874 	u32 pdev_set_vht_cap_ie_cmdid;
875 	u32 pdev_set_dscp_tid_map_cmdid;
876 	u32 pdev_set_quiet_mode_cmdid;
877 	u32 pdev_green_ap_ps_enable_cmdid;
878 	u32 pdev_get_tpc_config_cmdid;
879 	u32 pdev_set_base_macaddr_cmdid;
880 	u32 vdev_create_cmdid;
881 	u32 vdev_delete_cmdid;
882 	u32 vdev_start_request_cmdid;
883 	u32 vdev_restart_request_cmdid;
884 	u32 vdev_up_cmdid;
885 	u32 vdev_stop_cmdid;
886 	u32 vdev_down_cmdid;
887 	u32 vdev_set_param_cmdid;
888 	u32 vdev_install_key_cmdid;
889 	u32 peer_create_cmdid;
890 	u32 peer_delete_cmdid;
891 	u32 peer_flush_tids_cmdid;
892 	u32 peer_set_param_cmdid;
893 	u32 peer_assoc_cmdid;
894 	u32 peer_add_wds_entry_cmdid;
895 	u32 peer_remove_wds_entry_cmdid;
896 	u32 peer_mcast_group_cmdid;
897 	u32 bcn_tx_cmdid;
898 	u32 pdev_send_bcn_cmdid;
899 	u32 bcn_tmpl_cmdid;
900 	u32 bcn_filter_rx_cmdid;
901 	u32 prb_req_filter_rx_cmdid;
902 	u32 mgmt_tx_cmdid;
903 	u32 mgmt_tx_send_cmdid;
904 	u32 prb_tmpl_cmdid;
905 	u32 addba_clear_resp_cmdid;
906 	u32 addba_send_cmdid;
907 	u32 addba_status_cmdid;
908 	u32 delba_send_cmdid;
909 	u32 addba_set_resp_cmdid;
910 	u32 send_singleamsdu_cmdid;
911 	u32 sta_powersave_mode_cmdid;
912 	u32 sta_powersave_param_cmdid;
913 	u32 sta_mimo_ps_mode_cmdid;
914 	u32 pdev_dfs_enable_cmdid;
915 	u32 pdev_dfs_disable_cmdid;
916 	u32 roam_scan_mode;
917 	u32 roam_scan_rssi_threshold;
918 	u32 roam_scan_period;
919 	u32 roam_scan_rssi_change_threshold;
920 	u32 roam_ap_profile;
921 	u32 ofl_scan_add_ap_profile;
922 	u32 ofl_scan_remove_ap_profile;
923 	u32 ofl_scan_period;
924 	u32 p2p_dev_set_device_info;
925 	u32 p2p_dev_set_discoverability;
926 	u32 p2p_go_set_beacon_ie;
927 	u32 p2p_go_set_probe_resp_ie;
928 	u32 p2p_set_vendor_ie_data_cmdid;
929 	u32 ap_ps_peer_param_cmdid;
930 	u32 ap_ps_peer_uapsd_coex_cmdid;
931 	u32 peer_rate_retry_sched_cmdid;
932 	u32 wlan_profile_trigger_cmdid;
933 	u32 wlan_profile_set_hist_intvl_cmdid;
934 	u32 wlan_profile_get_profile_data_cmdid;
935 	u32 wlan_profile_enable_profile_id_cmdid;
936 	u32 wlan_profile_list_profile_id_cmdid;
937 	u32 pdev_suspend_cmdid;
938 	u32 pdev_resume_cmdid;
939 	u32 add_bcn_filter_cmdid;
940 	u32 rmv_bcn_filter_cmdid;
941 	u32 wow_add_wake_pattern_cmdid;
942 	u32 wow_del_wake_pattern_cmdid;
943 	u32 wow_enable_disable_wake_event_cmdid;
944 	u32 wow_enable_cmdid;
945 	u32 wow_hostwakeup_from_sleep_cmdid;
946 	u32 rtt_measreq_cmdid;
947 	u32 rtt_tsf_cmdid;
948 	u32 vdev_spectral_scan_configure_cmdid;
949 	u32 vdev_spectral_scan_enable_cmdid;
950 	u32 request_stats_cmdid;
951 	u32 request_peer_stats_info_cmdid;
952 	u32 set_arp_ns_offload_cmdid;
953 	u32 network_list_offload_config_cmdid;
954 	u32 gtk_offload_cmdid;
955 	u32 csa_offload_enable_cmdid;
956 	u32 csa_offload_chanswitch_cmdid;
957 	u32 chatter_set_mode_cmdid;
958 	u32 peer_tid_addba_cmdid;
959 	u32 peer_tid_delba_cmdid;
960 	u32 sta_dtim_ps_method_cmdid;
961 	u32 sta_uapsd_auto_trig_cmdid;
962 	u32 sta_keepalive_cmd;
963 	u32 echo_cmdid;
964 	u32 pdev_utf_cmdid;
965 	u32 dbglog_cfg_cmdid;
966 	u32 pdev_qvit_cmdid;
967 	u32 pdev_ftm_intg_cmdid;
968 	u32 vdev_set_keepalive_cmdid;
969 	u32 vdev_get_keepalive_cmdid;
970 	u32 force_fw_hang_cmdid;
971 	u32 gpio_config_cmdid;
972 	u32 gpio_output_cmdid;
973 	u32 pdev_get_temperature_cmdid;
974 	u32 vdev_set_wmm_params_cmdid;
975 	u32 tdls_set_state_cmdid;
976 	u32 tdls_peer_update_cmdid;
977 	u32 adaptive_qcs_cmdid;
978 	u32 scan_update_request_cmdid;
979 	u32 vdev_standby_response_cmdid;
980 	u32 vdev_resume_response_cmdid;
981 	u32 wlan_peer_caching_add_peer_cmdid;
982 	u32 wlan_peer_caching_evict_peer_cmdid;
983 	u32 wlan_peer_caching_restore_peer_cmdid;
984 	u32 wlan_peer_caching_print_all_peers_info_cmdid;
985 	u32 peer_update_wds_entry_cmdid;
986 	u32 peer_add_proxy_sta_entry_cmdid;
987 	u32 rtt_keepalive_cmdid;
988 	u32 oem_req_cmdid;
989 	u32 nan_cmdid;
990 	u32 vdev_ratemask_cmdid;
991 	u32 qboost_cfg_cmdid;
992 	u32 pdev_smart_ant_enable_cmdid;
993 	u32 pdev_smart_ant_set_rx_antenna_cmdid;
994 	u32 peer_smart_ant_set_tx_antenna_cmdid;
995 	u32 peer_smart_ant_set_train_info_cmdid;
996 	u32 peer_smart_ant_set_node_config_ops_cmdid;
997 	u32 pdev_set_antenna_switch_table_cmdid;
998 	u32 pdev_set_ctl_table_cmdid;
999 	u32 pdev_set_mimogain_table_cmdid;
1000 	u32 pdev_ratepwr_table_cmdid;
1001 	u32 pdev_ratepwr_chainmsk_table_cmdid;
1002 	u32 pdev_fips_cmdid;
1003 	u32 tt_set_conf_cmdid;
1004 	u32 fwtest_cmdid;
1005 	u32 vdev_atf_request_cmdid;
1006 	u32 peer_atf_request_cmdid;
1007 	u32 pdev_get_ani_cck_config_cmdid;
1008 	u32 pdev_get_ani_ofdm_config_cmdid;
1009 	u32 pdev_reserve_ast_entry_cmdid;
1010 	u32 pdev_get_nfcal_power_cmdid;
1011 	u32 pdev_get_tpc_cmdid;
1012 	u32 pdev_get_ast_info_cmdid;
1013 	u32 vdev_set_dscp_tid_map_cmdid;
1014 	u32 pdev_get_info_cmdid;
1015 	u32 vdev_get_info_cmdid;
1016 	u32 vdev_filter_neighbor_rx_packets_cmdid;
1017 	u32 mu_cal_start_cmdid;
1018 	u32 set_cca_params_cmdid;
1019 	u32 pdev_bss_chan_info_request_cmdid;
1020 	u32 pdev_enable_adaptive_cca_cmdid;
1021 	u32 ext_resource_cfg_cmdid;
1022 	u32 vdev_set_ie_cmdid;
1023 	u32 set_lteu_config_cmdid;
1024 	u32 atf_ssid_grouping_request_cmdid;
1025 	u32 peer_atf_ext_request_cmdid;
1026 	u32 set_periodic_channel_stats_cfg_cmdid;
1027 	u32 peer_bwf_request_cmdid;
1028 	u32 btcoex_cfg_cmdid;
1029 	u32 peer_tx_mu_txmit_count_cmdid;
1030 	u32 peer_tx_mu_txmit_rstcnt_cmdid;
1031 	u32 peer_gid_userpos_list_cmdid;
1032 	u32 pdev_check_cal_version_cmdid;
1033 	u32 coex_version_cfg_cmid;
1034 	u32 pdev_get_rx_filter_cmdid;
1035 	u32 pdev_extended_nss_cfg_cmdid;
1036 	u32 vdev_set_scan_nac_rssi_cmdid;
1037 	u32 prog_gpio_band_select_cmdid;
1038 	u32 config_smart_logging_cmdid;
1039 	u32 debug_fatal_condition_cmdid;
1040 	u32 get_tsf_timer_cmdid;
1041 	u32 pdev_get_tpc_table_cmdid;
1042 	u32 vdev_sifs_trigger_time_cmdid;
1043 	u32 pdev_wds_entry_list_cmdid;
1044 	u32 tdls_set_offchan_mode_cmdid;
1045 	u32 radar_found_cmdid;
1046 	u32 set_bb_timing_cmdid;
1047 	u32 per_peer_per_tid_config_cmdid;
1048 };
1049 
1050 /*
1051  * wmi command groups.
1052  */
1053 enum wmi_cmd_group {
1054 	/* 0 to 2 are reserved */
1055 	WMI_GRP_START = 0x3,
1056 	WMI_GRP_SCAN = WMI_GRP_START,
1057 	WMI_GRP_PDEV,
1058 	WMI_GRP_VDEV,
1059 	WMI_GRP_PEER,
1060 	WMI_GRP_MGMT,
1061 	WMI_GRP_BA_NEG,
1062 	WMI_GRP_STA_PS,
1063 	WMI_GRP_DFS,
1064 	WMI_GRP_ROAM,
1065 	WMI_GRP_OFL_SCAN,
1066 	WMI_GRP_P2P,
1067 	WMI_GRP_AP_PS,
1068 	WMI_GRP_RATE_CTRL,
1069 	WMI_GRP_PROFILE,
1070 	WMI_GRP_SUSPEND,
1071 	WMI_GRP_BCN_FILTER,
1072 	WMI_GRP_WOW,
1073 	WMI_GRP_RTT,
1074 	WMI_GRP_SPECTRAL,
1075 	WMI_GRP_STATS,
1076 	WMI_GRP_ARP_NS_OFL,
1077 	WMI_GRP_NLO_OFL,
1078 	WMI_GRP_GTK_OFL,
1079 	WMI_GRP_CSA_OFL,
1080 	WMI_GRP_CHATTER,
1081 	WMI_GRP_TID_ADDBA,
1082 	WMI_GRP_MISC,
1083 	WMI_GRP_GPIO,
1084 };
1085 
1086 #define WMI_CMD_GRP(grp_id) (((grp_id) << 12) | 0x1)
1087 #define WMI_EVT_GRP_START_ID(grp_id) (((grp_id) << 12) | 0x1)
1088 
1089 #define WMI_CMD_UNSUPPORTED 0
1090 
1091 /* Command IDs and command events for MAIN FW. */
1092 enum wmi_cmd_id {
1093 	WMI_INIT_CMDID = 0x1,
1094 
1095 	/* Scan specific commands */
1096 	WMI_START_SCAN_CMDID = WMI_CMD_GRP(WMI_GRP_SCAN),
1097 	WMI_STOP_SCAN_CMDID,
1098 	WMI_SCAN_CHAN_LIST_CMDID,
1099 	WMI_SCAN_SCH_PRIO_TBL_CMDID,
1100 
1101 	/* PDEV (physical device) specific commands */
1102 	WMI_PDEV_SET_REGDOMAIN_CMDID = WMI_CMD_GRP(WMI_GRP_PDEV),
1103 	WMI_PDEV_SET_CHANNEL_CMDID,
1104 	WMI_PDEV_SET_PARAM_CMDID,
1105 	WMI_PDEV_PKTLOG_ENABLE_CMDID,
1106 	WMI_PDEV_PKTLOG_DISABLE_CMDID,
1107 	WMI_PDEV_SET_WMM_PARAMS_CMDID,
1108 	WMI_PDEV_SET_HT_CAP_IE_CMDID,
1109 	WMI_PDEV_SET_VHT_CAP_IE_CMDID,
1110 	WMI_PDEV_SET_DSCP_TID_MAP_CMDID,
1111 	WMI_PDEV_SET_QUIET_MODE_CMDID,
1112 	WMI_PDEV_GREEN_AP_PS_ENABLE_CMDID,
1113 	WMI_PDEV_GET_TPC_CONFIG_CMDID,
1114 	WMI_PDEV_SET_BASE_MACADDR_CMDID,
1115 
1116 	/* VDEV (virtual device) specific commands */
1117 	WMI_VDEV_CREATE_CMDID = WMI_CMD_GRP(WMI_GRP_VDEV),
1118 	WMI_VDEV_DELETE_CMDID,
1119 	WMI_VDEV_START_REQUEST_CMDID,
1120 	WMI_VDEV_RESTART_REQUEST_CMDID,
1121 	WMI_VDEV_UP_CMDID,
1122 	WMI_VDEV_STOP_CMDID,
1123 	WMI_VDEV_DOWN_CMDID,
1124 	WMI_VDEV_SET_PARAM_CMDID,
1125 	WMI_VDEV_INSTALL_KEY_CMDID,
1126 
1127 	/* peer specific commands */
1128 	WMI_PEER_CREATE_CMDID = WMI_CMD_GRP(WMI_GRP_PEER),
1129 	WMI_PEER_DELETE_CMDID,
1130 	WMI_PEER_FLUSH_TIDS_CMDID,
1131 	WMI_PEER_SET_PARAM_CMDID,
1132 	WMI_PEER_ASSOC_CMDID,
1133 	WMI_PEER_ADD_WDS_ENTRY_CMDID,
1134 	WMI_PEER_REMOVE_WDS_ENTRY_CMDID,
1135 	WMI_PEER_MCAST_GROUP_CMDID,
1136 
1137 	/* beacon/management specific commands */
1138 	WMI_BCN_TX_CMDID = WMI_CMD_GRP(WMI_GRP_MGMT),
1139 	WMI_PDEV_SEND_BCN_CMDID,
1140 	WMI_BCN_TMPL_CMDID,
1141 	WMI_BCN_FILTER_RX_CMDID,
1142 	WMI_PRB_REQ_FILTER_RX_CMDID,
1143 	WMI_MGMT_TX_CMDID,
1144 	WMI_PRB_TMPL_CMDID,
1145 
1146 	/* commands to directly control BA negotiation directly from host. */
1147 	WMI_ADDBA_CLEAR_RESP_CMDID = WMI_CMD_GRP(WMI_GRP_BA_NEG),
1148 	WMI_ADDBA_SEND_CMDID,
1149 	WMI_ADDBA_STATUS_CMDID,
1150 	WMI_DELBA_SEND_CMDID,
1151 	WMI_ADDBA_SET_RESP_CMDID,
1152 	WMI_SEND_SINGLEAMSDU_CMDID,
1153 
1154 	/* Station power save specific config */
1155 	WMI_STA_POWERSAVE_MODE_CMDID = WMI_CMD_GRP(WMI_GRP_STA_PS),
1156 	WMI_STA_POWERSAVE_PARAM_CMDID,
1157 	WMI_STA_MIMO_PS_MODE_CMDID,
1158 
1159 	/** DFS-specific commands */
1160 	WMI_PDEV_DFS_ENABLE_CMDID = WMI_CMD_GRP(WMI_GRP_DFS),
1161 	WMI_PDEV_DFS_DISABLE_CMDID,
1162 
1163 	/* Roaming specific  commands */
1164 	WMI_ROAM_SCAN_MODE = WMI_CMD_GRP(WMI_GRP_ROAM),
1165 	WMI_ROAM_SCAN_RSSI_THRESHOLD,
1166 	WMI_ROAM_SCAN_PERIOD,
1167 	WMI_ROAM_SCAN_RSSI_CHANGE_THRESHOLD,
1168 	WMI_ROAM_AP_PROFILE,
1169 
1170 	/* offload scan specific commands */
1171 	WMI_OFL_SCAN_ADD_AP_PROFILE = WMI_CMD_GRP(WMI_GRP_OFL_SCAN),
1172 	WMI_OFL_SCAN_REMOVE_AP_PROFILE,
1173 	WMI_OFL_SCAN_PERIOD,
1174 
1175 	/* P2P specific commands */
1176 	WMI_P2P_DEV_SET_DEVICE_INFO = WMI_CMD_GRP(WMI_GRP_P2P),
1177 	WMI_P2P_DEV_SET_DISCOVERABILITY,
1178 	WMI_P2P_GO_SET_BEACON_IE,
1179 	WMI_P2P_GO_SET_PROBE_RESP_IE,
1180 	WMI_P2P_SET_VENDOR_IE_DATA_CMDID,
1181 
1182 	/* AP power save specific config */
1183 	WMI_AP_PS_PEER_PARAM_CMDID = WMI_CMD_GRP(WMI_GRP_AP_PS),
1184 	WMI_AP_PS_PEER_UAPSD_COEX_CMDID,
1185 
1186 	/* Rate-control specific commands */
1187 	WMI_PEER_RATE_RETRY_SCHED_CMDID =
1188 	WMI_CMD_GRP(WMI_GRP_RATE_CTRL),
1189 
1190 	/* WLAN Profiling commands. */
1191 	WMI_WLAN_PROFILE_TRIGGER_CMDID = WMI_CMD_GRP(WMI_GRP_PROFILE),
1192 	WMI_WLAN_PROFILE_SET_HIST_INTVL_CMDID,
1193 	WMI_WLAN_PROFILE_GET_PROFILE_DATA_CMDID,
1194 	WMI_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID,
1195 	WMI_WLAN_PROFILE_LIST_PROFILE_ID_CMDID,
1196 
1197 	/* Suspend resume command Ids */
1198 	WMI_PDEV_SUSPEND_CMDID = WMI_CMD_GRP(WMI_GRP_SUSPEND),
1199 	WMI_PDEV_RESUME_CMDID,
1200 
1201 	/* Beacon filter commands */
1202 	WMI_ADD_BCN_FILTER_CMDID = WMI_CMD_GRP(WMI_GRP_BCN_FILTER),
1203 	WMI_RMV_BCN_FILTER_CMDID,
1204 
1205 	/* WOW Specific WMI commands*/
1206 	WMI_WOW_ADD_WAKE_PATTERN_CMDID = WMI_CMD_GRP(WMI_GRP_WOW),
1207 	WMI_WOW_DEL_WAKE_PATTERN_CMDID,
1208 	WMI_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID,
1209 	WMI_WOW_ENABLE_CMDID,
1210 	WMI_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID,
1211 
1212 	/* RTT measurement related cmd */
1213 	WMI_RTT_MEASREQ_CMDID = WMI_CMD_GRP(WMI_GRP_RTT),
1214 	WMI_RTT_TSF_CMDID,
1215 
1216 	/* spectral scan commands */
1217 	WMI_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID = WMI_CMD_GRP(WMI_GRP_SPECTRAL),
1218 	WMI_VDEV_SPECTRAL_SCAN_ENABLE_CMDID,
1219 
1220 	/* F/W stats */
1221 	WMI_REQUEST_STATS_CMDID = WMI_CMD_GRP(WMI_GRP_STATS),
1222 
1223 	/* ARP OFFLOAD REQUEST*/
1224 	WMI_SET_ARP_NS_OFFLOAD_CMDID = WMI_CMD_GRP(WMI_GRP_ARP_NS_OFL),
1225 
1226 	/* NS offload confid*/
1227 	WMI_NETWORK_LIST_OFFLOAD_CONFIG_CMDID = WMI_CMD_GRP(WMI_GRP_NLO_OFL),
1228 
1229 	/* GTK offload Specific WMI commands*/
1230 	WMI_GTK_OFFLOAD_CMDID = WMI_CMD_GRP(WMI_GRP_GTK_OFL),
1231 
1232 	/* CSA offload Specific WMI commands*/
1233 	WMI_CSA_OFFLOAD_ENABLE_CMDID = WMI_CMD_GRP(WMI_GRP_CSA_OFL),
1234 	WMI_CSA_OFFLOAD_CHANSWITCH_CMDID,
1235 
1236 	/* Chatter commands*/
1237 	WMI_CHATTER_SET_MODE_CMDID = WMI_CMD_GRP(WMI_GRP_CHATTER),
1238 
1239 	/* addba specific commands */
1240 	WMI_PEER_TID_ADDBA_CMDID = WMI_CMD_GRP(WMI_GRP_TID_ADDBA),
1241 	WMI_PEER_TID_DELBA_CMDID,
1242 
1243 	/* set station mimo powersave method */
1244 	WMI_STA_DTIM_PS_METHOD_CMDID,
1245 	/* Configure the Station UAPSD AC Auto Trigger Parameters */
1246 	WMI_STA_UAPSD_AUTO_TRIG_CMDID,
1247 
1248 	/* STA Keep alive parameter configuration,
1249 	 * Requires WMI_SERVICE_STA_KEEP_ALIVE
1250 	 */
1251 	WMI_STA_KEEPALIVE_CMD,
1252 
1253 	/* misc command group */
1254 	WMI_ECHO_CMDID = WMI_CMD_GRP(WMI_GRP_MISC),
1255 	WMI_PDEV_UTF_CMDID,
1256 	WMI_DBGLOG_CFG_CMDID,
1257 	WMI_PDEV_QVIT_CMDID,
1258 	WMI_PDEV_FTM_INTG_CMDID,
1259 	WMI_VDEV_SET_KEEPALIVE_CMDID,
1260 	WMI_VDEV_GET_KEEPALIVE_CMDID,
1261 	WMI_FORCE_FW_HANG_CMDID,
1262 
1263 	/* GPIO Configuration */
1264 	WMI_GPIO_CONFIG_CMDID = WMI_CMD_GRP(WMI_GRP_GPIO),
1265 	WMI_GPIO_OUTPUT_CMDID,
1266 };
1267 
1268 enum wmi_event_id {
1269 	WMI_SERVICE_READY_EVENTID = 0x1,
1270 	WMI_READY_EVENTID,
1271 	WMI_SERVICE_AVAILABLE_EVENTID,
1272 
1273 	/* Scan specific events */
1274 	WMI_SCAN_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_SCAN),
1275 
1276 	/* PDEV specific events */
1277 	WMI_PDEV_TPC_CONFIG_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_PDEV),
1278 	WMI_CHAN_INFO_EVENTID,
1279 	WMI_PHYERR_EVENTID,
1280 
1281 	/* VDEV specific events */
1282 	WMI_VDEV_START_RESP_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_VDEV),
1283 	WMI_VDEV_STOPPED_EVENTID,
1284 	WMI_VDEV_INSTALL_KEY_COMPLETE_EVENTID,
1285 
1286 	/* peer specific events */
1287 	WMI_PEER_STA_KICKOUT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_PEER),
1288 
1289 	/* beacon/mgmt specific events */
1290 	WMI_MGMT_RX_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_MGMT),
1291 	WMI_HOST_SWBA_EVENTID,
1292 	WMI_TBTTOFFSET_UPDATE_EVENTID,
1293 
1294 	/* ADDBA Related WMI Events*/
1295 	WMI_TX_DELBA_COMPLETE_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_BA_NEG),
1296 	WMI_TX_ADDBA_COMPLETE_EVENTID,
1297 
1298 	/* Roam event to trigger roaming on host */
1299 	WMI_ROAM_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_ROAM),
1300 	WMI_PROFILE_MATCH,
1301 
1302 	/* WoW */
1303 	WMI_WOW_WAKEUP_HOST_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_WOW),
1304 
1305 	/* RTT */
1306 	WMI_RTT_MEASUREMENT_REPORT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_RTT),
1307 	WMI_TSF_MEASUREMENT_REPORT_EVENTID,
1308 	WMI_RTT_ERROR_REPORT_EVENTID,
1309 
1310 	/* GTK offload */
1311 	WMI_GTK_OFFLOAD_STATUS_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_GTK_OFL),
1312 	WMI_GTK_REKEY_FAIL_EVENTID,
1313 
1314 	/* CSA IE received event */
1315 	WMI_CSA_HANDLING_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_CSA_OFL),
1316 
1317 	/* Misc events */
1318 	WMI_ECHO_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_MISC),
1319 	WMI_PDEV_UTF_EVENTID,
1320 	WMI_DEBUG_MESG_EVENTID,
1321 	WMI_UPDATE_STATS_EVENTID,
1322 	WMI_DEBUG_PRINT_EVENTID,
1323 	WMI_DCS_INTERFERENCE_EVENTID,
1324 	WMI_PDEV_QVIT_EVENTID,
1325 	WMI_WLAN_PROFILE_DATA_EVENTID,
1326 	WMI_PDEV_FTM_INTG_EVENTID,
1327 	WMI_WLAN_FREQ_AVOID_EVENTID,
1328 	WMI_VDEV_GET_KEEPALIVE_EVENTID,
1329 
1330 	/* GPIO Event */
1331 	WMI_GPIO_INPUT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_GPIO),
1332 };
1333 
1334 /* Command IDs and command events for 10.X firmware */
1335 enum wmi_10x_cmd_id {
1336 	WMI_10X_START_CMDID = 0x9000,
1337 	WMI_10X_END_CMDID = 0x9FFF,
1338 
1339 	/* initialize the wlan sub system */
1340 	WMI_10X_INIT_CMDID,
1341 
1342 	/* Scan specific commands */
1343 
1344 	WMI_10X_START_SCAN_CMDID = WMI_10X_START_CMDID,
1345 	WMI_10X_STOP_SCAN_CMDID,
1346 	WMI_10X_SCAN_CHAN_LIST_CMDID,
1347 	WMI_10X_ECHO_CMDID,
1348 
1349 	/* PDEV(physical device) specific commands */
1350 	WMI_10X_PDEV_SET_REGDOMAIN_CMDID,
1351 	WMI_10X_PDEV_SET_CHANNEL_CMDID,
1352 	WMI_10X_PDEV_SET_PARAM_CMDID,
1353 	WMI_10X_PDEV_PKTLOG_ENABLE_CMDID,
1354 	WMI_10X_PDEV_PKTLOG_DISABLE_CMDID,
1355 	WMI_10X_PDEV_SET_WMM_PARAMS_CMDID,
1356 	WMI_10X_PDEV_SET_HT_CAP_IE_CMDID,
1357 	WMI_10X_PDEV_SET_VHT_CAP_IE_CMDID,
1358 	WMI_10X_PDEV_SET_BASE_MACADDR_CMDID,
1359 	WMI_10X_PDEV_SET_DSCP_TID_MAP_CMDID,
1360 	WMI_10X_PDEV_SET_QUIET_MODE_CMDID,
1361 	WMI_10X_PDEV_GREEN_AP_PS_ENABLE_CMDID,
1362 	WMI_10X_PDEV_GET_TPC_CONFIG_CMDID,
1363 
1364 	/* VDEV(virtual device) specific commands */
1365 	WMI_10X_VDEV_CREATE_CMDID,
1366 	WMI_10X_VDEV_DELETE_CMDID,
1367 	WMI_10X_VDEV_START_REQUEST_CMDID,
1368 	WMI_10X_VDEV_RESTART_REQUEST_CMDID,
1369 	WMI_10X_VDEV_UP_CMDID,
1370 	WMI_10X_VDEV_STOP_CMDID,
1371 	WMI_10X_VDEV_DOWN_CMDID,
1372 	WMI_10X_VDEV_STANDBY_RESPONSE_CMDID,
1373 	WMI_10X_VDEV_RESUME_RESPONSE_CMDID,
1374 	WMI_10X_VDEV_SET_PARAM_CMDID,
1375 	WMI_10X_VDEV_INSTALL_KEY_CMDID,
1376 
1377 	/* peer specific commands */
1378 	WMI_10X_PEER_CREATE_CMDID,
1379 	WMI_10X_PEER_DELETE_CMDID,
1380 	WMI_10X_PEER_FLUSH_TIDS_CMDID,
1381 	WMI_10X_PEER_SET_PARAM_CMDID,
1382 	WMI_10X_PEER_ASSOC_CMDID,
1383 	WMI_10X_PEER_ADD_WDS_ENTRY_CMDID,
1384 	WMI_10X_PEER_REMOVE_WDS_ENTRY_CMDID,
1385 	WMI_10X_PEER_MCAST_GROUP_CMDID,
1386 
1387 	/* beacon/management specific commands */
1388 
1389 	WMI_10X_BCN_TX_CMDID,
1390 	WMI_10X_BCN_PRB_TMPL_CMDID,
1391 	WMI_10X_BCN_FILTER_RX_CMDID,
1392 	WMI_10X_PRB_REQ_FILTER_RX_CMDID,
1393 	WMI_10X_MGMT_TX_CMDID,
1394 
1395 	/* commands to directly control ba negotiation directly from host. */
1396 	WMI_10X_ADDBA_CLEAR_RESP_CMDID,
1397 	WMI_10X_ADDBA_SEND_CMDID,
1398 	WMI_10X_ADDBA_STATUS_CMDID,
1399 	WMI_10X_DELBA_SEND_CMDID,
1400 	WMI_10X_ADDBA_SET_RESP_CMDID,
1401 	WMI_10X_SEND_SINGLEAMSDU_CMDID,
1402 
1403 	/* Station power save specific config */
1404 	WMI_10X_STA_POWERSAVE_MODE_CMDID,
1405 	WMI_10X_STA_POWERSAVE_PARAM_CMDID,
1406 	WMI_10X_STA_MIMO_PS_MODE_CMDID,
1407 
1408 	/* set debug log config */
1409 	WMI_10X_DBGLOG_CFG_CMDID,
1410 
1411 	/* DFS-specific commands */
1412 	WMI_10X_PDEV_DFS_ENABLE_CMDID,
1413 	WMI_10X_PDEV_DFS_DISABLE_CMDID,
1414 
1415 	/* QVIT specific command id */
1416 	WMI_10X_PDEV_QVIT_CMDID,
1417 
1418 	/* Offload Scan and Roaming related  commands */
1419 	WMI_10X_ROAM_SCAN_MODE,
1420 	WMI_10X_ROAM_SCAN_RSSI_THRESHOLD,
1421 	WMI_10X_ROAM_SCAN_PERIOD,
1422 	WMI_10X_ROAM_SCAN_RSSI_CHANGE_THRESHOLD,
1423 	WMI_10X_ROAM_AP_PROFILE,
1424 	WMI_10X_OFL_SCAN_ADD_AP_PROFILE,
1425 	WMI_10X_OFL_SCAN_REMOVE_AP_PROFILE,
1426 	WMI_10X_OFL_SCAN_PERIOD,
1427 
1428 	/* P2P specific commands */
1429 	WMI_10X_P2P_DEV_SET_DEVICE_INFO,
1430 	WMI_10X_P2P_DEV_SET_DISCOVERABILITY,
1431 	WMI_10X_P2P_GO_SET_BEACON_IE,
1432 	WMI_10X_P2P_GO_SET_PROBE_RESP_IE,
1433 
1434 	/* AP power save specific config */
1435 	WMI_10X_AP_PS_PEER_PARAM_CMDID,
1436 	WMI_10X_AP_PS_PEER_UAPSD_COEX_CMDID,
1437 
1438 	/* Rate-control specific commands */
1439 	WMI_10X_PEER_RATE_RETRY_SCHED_CMDID,
1440 
1441 	/* WLAN Profiling commands. */
1442 	WMI_10X_WLAN_PROFILE_TRIGGER_CMDID,
1443 	WMI_10X_WLAN_PROFILE_SET_HIST_INTVL_CMDID,
1444 	WMI_10X_WLAN_PROFILE_GET_PROFILE_DATA_CMDID,
1445 	WMI_10X_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID,
1446 	WMI_10X_WLAN_PROFILE_LIST_PROFILE_ID_CMDID,
1447 
1448 	/* Suspend resume command Ids */
1449 	WMI_10X_PDEV_SUSPEND_CMDID,
1450 	WMI_10X_PDEV_RESUME_CMDID,
1451 
1452 	/* Beacon filter commands */
1453 	WMI_10X_ADD_BCN_FILTER_CMDID,
1454 	WMI_10X_RMV_BCN_FILTER_CMDID,
1455 
1456 	/* WOW Specific WMI commands*/
1457 	WMI_10X_WOW_ADD_WAKE_PATTERN_CMDID,
1458 	WMI_10X_WOW_DEL_WAKE_PATTERN_CMDID,
1459 	WMI_10X_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID,
1460 	WMI_10X_WOW_ENABLE_CMDID,
1461 	WMI_10X_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID,
1462 
1463 	/* RTT measurement related cmd */
1464 	WMI_10X_RTT_MEASREQ_CMDID,
1465 	WMI_10X_RTT_TSF_CMDID,
1466 
1467 	/* transmit beacon by value */
1468 	WMI_10X_PDEV_SEND_BCN_CMDID,
1469 
1470 	/* F/W stats */
1471 	WMI_10X_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID,
1472 	WMI_10X_VDEV_SPECTRAL_SCAN_ENABLE_CMDID,
1473 	WMI_10X_REQUEST_STATS_CMDID,
1474 
1475 	/* GPIO Configuration */
1476 	WMI_10X_GPIO_CONFIG_CMDID,
1477 	WMI_10X_GPIO_OUTPUT_CMDID,
1478 
1479 	WMI_10X_PDEV_UTF_CMDID = WMI_10X_END_CMDID - 1,
1480 };
1481 
1482 enum wmi_10x_event_id {
1483 	WMI_10X_SERVICE_READY_EVENTID = 0x8000,
1484 	WMI_10X_READY_EVENTID,
1485 	WMI_10X_START_EVENTID = 0x9000,
1486 	WMI_10X_END_EVENTID = 0x9FFF,
1487 
1488 	/* Scan specific events */
1489 	WMI_10X_SCAN_EVENTID = WMI_10X_START_EVENTID,
1490 	WMI_10X_ECHO_EVENTID,
1491 	WMI_10X_DEBUG_MESG_EVENTID,
1492 	WMI_10X_UPDATE_STATS_EVENTID,
1493 
1494 	/* Instantaneous RSSI event */
1495 	WMI_10X_INST_RSSI_STATS_EVENTID,
1496 
1497 	/* VDEV specific events */
1498 	WMI_10X_VDEV_START_RESP_EVENTID,
1499 	WMI_10X_VDEV_STANDBY_REQ_EVENTID,
1500 	WMI_10X_VDEV_RESUME_REQ_EVENTID,
1501 	WMI_10X_VDEV_STOPPED_EVENTID,
1502 
1503 	/* peer  specific events */
1504 	WMI_10X_PEER_STA_KICKOUT_EVENTID,
1505 
1506 	/* beacon/mgmt specific events */
1507 	WMI_10X_HOST_SWBA_EVENTID,
1508 	WMI_10X_TBTTOFFSET_UPDATE_EVENTID,
1509 	WMI_10X_MGMT_RX_EVENTID,
1510 
1511 	/* Channel stats event */
1512 	WMI_10X_CHAN_INFO_EVENTID,
1513 
1514 	/* PHY Error specific WMI event */
1515 	WMI_10X_PHYERR_EVENTID,
1516 
1517 	/* Roam event to trigger roaming on host */
1518 	WMI_10X_ROAM_EVENTID,
1519 
1520 	/* matching AP found from list of profiles */
1521 	WMI_10X_PROFILE_MATCH,
1522 
1523 	/* debug print message used for tracing FW code while debugging */
1524 	WMI_10X_DEBUG_PRINT_EVENTID,
1525 	/* VI spoecific event */
1526 	WMI_10X_PDEV_QVIT_EVENTID,
1527 	/* FW code profile data in response to profile request */
1528 	WMI_10X_WLAN_PROFILE_DATA_EVENTID,
1529 
1530 	/*RTT related event ID*/
1531 	WMI_10X_RTT_MEASUREMENT_REPORT_EVENTID,
1532 	WMI_10X_TSF_MEASUREMENT_REPORT_EVENTID,
1533 	WMI_10X_RTT_ERROR_REPORT_EVENTID,
1534 
1535 	WMI_10X_WOW_WAKEUP_HOST_EVENTID,
1536 	WMI_10X_DCS_INTERFERENCE_EVENTID,
1537 
1538 	/* TPC config for the current operating channel */
1539 	WMI_10X_PDEV_TPC_CONFIG_EVENTID,
1540 
1541 	WMI_10X_GPIO_INPUT_EVENTID,
1542 	WMI_10X_PDEV_UTF_EVENTID = WMI_10X_END_EVENTID - 1,
1543 };
1544 
1545 enum wmi_10_2_cmd_id {
1546 	WMI_10_2_START_CMDID = 0x9000,
1547 	WMI_10_2_END_CMDID = 0x9FFF,
1548 	WMI_10_2_INIT_CMDID,
1549 	WMI_10_2_START_SCAN_CMDID = WMI_10_2_START_CMDID,
1550 	WMI_10_2_STOP_SCAN_CMDID,
1551 	WMI_10_2_SCAN_CHAN_LIST_CMDID,
1552 	WMI_10_2_ECHO_CMDID,
1553 	WMI_10_2_PDEV_SET_REGDOMAIN_CMDID,
1554 	WMI_10_2_PDEV_SET_CHANNEL_CMDID,
1555 	WMI_10_2_PDEV_SET_PARAM_CMDID,
1556 	WMI_10_2_PDEV_PKTLOG_ENABLE_CMDID,
1557 	WMI_10_2_PDEV_PKTLOG_DISABLE_CMDID,
1558 	WMI_10_2_PDEV_SET_WMM_PARAMS_CMDID,
1559 	WMI_10_2_PDEV_SET_HT_CAP_IE_CMDID,
1560 	WMI_10_2_PDEV_SET_VHT_CAP_IE_CMDID,
1561 	WMI_10_2_PDEV_SET_BASE_MACADDR_CMDID,
1562 	WMI_10_2_PDEV_SET_QUIET_MODE_CMDID,
1563 	WMI_10_2_PDEV_GREEN_AP_PS_ENABLE_CMDID,
1564 	WMI_10_2_PDEV_GET_TPC_CONFIG_CMDID,
1565 	WMI_10_2_VDEV_CREATE_CMDID,
1566 	WMI_10_2_VDEV_DELETE_CMDID,
1567 	WMI_10_2_VDEV_START_REQUEST_CMDID,
1568 	WMI_10_2_VDEV_RESTART_REQUEST_CMDID,
1569 	WMI_10_2_VDEV_UP_CMDID,
1570 	WMI_10_2_VDEV_STOP_CMDID,
1571 	WMI_10_2_VDEV_DOWN_CMDID,
1572 	WMI_10_2_VDEV_STANDBY_RESPONSE_CMDID,
1573 	WMI_10_2_VDEV_RESUME_RESPONSE_CMDID,
1574 	WMI_10_2_VDEV_SET_PARAM_CMDID,
1575 	WMI_10_2_VDEV_INSTALL_KEY_CMDID,
1576 	WMI_10_2_VDEV_SET_DSCP_TID_MAP_CMDID,
1577 	WMI_10_2_PEER_CREATE_CMDID,
1578 	WMI_10_2_PEER_DELETE_CMDID,
1579 	WMI_10_2_PEER_FLUSH_TIDS_CMDID,
1580 	WMI_10_2_PEER_SET_PARAM_CMDID,
1581 	WMI_10_2_PEER_ASSOC_CMDID,
1582 	WMI_10_2_PEER_ADD_WDS_ENTRY_CMDID,
1583 	WMI_10_2_PEER_UPDATE_WDS_ENTRY_CMDID,
1584 	WMI_10_2_PEER_REMOVE_WDS_ENTRY_CMDID,
1585 	WMI_10_2_PEER_MCAST_GROUP_CMDID,
1586 	WMI_10_2_BCN_TX_CMDID,
1587 	WMI_10_2_BCN_PRB_TMPL_CMDID,
1588 	WMI_10_2_BCN_FILTER_RX_CMDID,
1589 	WMI_10_2_PRB_REQ_FILTER_RX_CMDID,
1590 	WMI_10_2_MGMT_TX_CMDID,
1591 	WMI_10_2_ADDBA_CLEAR_RESP_CMDID,
1592 	WMI_10_2_ADDBA_SEND_CMDID,
1593 	WMI_10_2_ADDBA_STATUS_CMDID,
1594 	WMI_10_2_DELBA_SEND_CMDID,
1595 	WMI_10_2_ADDBA_SET_RESP_CMDID,
1596 	WMI_10_2_SEND_SINGLEAMSDU_CMDID,
1597 	WMI_10_2_STA_POWERSAVE_MODE_CMDID,
1598 	WMI_10_2_STA_POWERSAVE_PARAM_CMDID,
1599 	WMI_10_2_STA_MIMO_PS_MODE_CMDID,
1600 	WMI_10_2_DBGLOG_CFG_CMDID,
1601 	WMI_10_2_PDEV_DFS_ENABLE_CMDID,
1602 	WMI_10_2_PDEV_DFS_DISABLE_CMDID,
1603 	WMI_10_2_PDEV_QVIT_CMDID,
1604 	WMI_10_2_ROAM_SCAN_MODE,
1605 	WMI_10_2_ROAM_SCAN_RSSI_THRESHOLD,
1606 	WMI_10_2_ROAM_SCAN_PERIOD,
1607 	WMI_10_2_ROAM_SCAN_RSSI_CHANGE_THRESHOLD,
1608 	WMI_10_2_ROAM_AP_PROFILE,
1609 	WMI_10_2_OFL_SCAN_ADD_AP_PROFILE,
1610 	WMI_10_2_OFL_SCAN_REMOVE_AP_PROFILE,
1611 	WMI_10_2_OFL_SCAN_PERIOD,
1612 	WMI_10_2_P2P_DEV_SET_DEVICE_INFO,
1613 	WMI_10_2_P2P_DEV_SET_DISCOVERABILITY,
1614 	WMI_10_2_P2P_GO_SET_BEACON_IE,
1615 	WMI_10_2_P2P_GO_SET_PROBE_RESP_IE,
1616 	WMI_10_2_AP_PS_PEER_PARAM_CMDID,
1617 	WMI_10_2_AP_PS_PEER_UAPSD_COEX_CMDID,
1618 	WMI_10_2_PEER_RATE_RETRY_SCHED_CMDID,
1619 	WMI_10_2_WLAN_PROFILE_TRIGGER_CMDID,
1620 	WMI_10_2_WLAN_PROFILE_SET_HIST_INTVL_CMDID,
1621 	WMI_10_2_WLAN_PROFILE_GET_PROFILE_DATA_CMDID,
1622 	WMI_10_2_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID,
1623 	WMI_10_2_WLAN_PROFILE_LIST_PROFILE_ID_CMDID,
1624 	WMI_10_2_PDEV_SUSPEND_CMDID,
1625 	WMI_10_2_PDEV_RESUME_CMDID,
1626 	WMI_10_2_ADD_BCN_FILTER_CMDID,
1627 	WMI_10_2_RMV_BCN_FILTER_CMDID,
1628 	WMI_10_2_WOW_ADD_WAKE_PATTERN_CMDID,
1629 	WMI_10_2_WOW_DEL_WAKE_PATTERN_CMDID,
1630 	WMI_10_2_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID,
1631 	WMI_10_2_WOW_ENABLE_CMDID,
1632 	WMI_10_2_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID,
1633 	WMI_10_2_RTT_MEASREQ_CMDID,
1634 	WMI_10_2_RTT_TSF_CMDID,
1635 	WMI_10_2_RTT_KEEPALIVE_CMDID,
1636 	WMI_10_2_PDEV_SEND_BCN_CMDID,
1637 	WMI_10_2_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID,
1638 	WMI_10_2_VDEV_SPECTRAL_SCAN_ENABLE_CMDID,
1639 	WMI_10_2_REQUEST_STATS_CMDID,
1640 	WMI_10_2_GPIO_CONFIG_CMDID,
1641 	WMI_10_2_GPIO_OUTPUT_CMDID,
1642 	WMI_10_2_VDEV_RATEMASK_CMDID,
1643 	WMI_10_2_PDEV_SMART_ANT_ENABLE_CMDID,
1644 	WMI_10_2_PDEV_SMART_ANT_SET_RX_ANTENNA_CMDID,
1645 	WMI_10_2_PEER_SMART_ANT_SET_TX_ANTENNA_CMDID,
1646 	WMI_10_2_PEER_SMART_ANT_SET_TRAIN_INFO_CMDID,
1647 	WMI_10_2_PEER_SMART_ANT_SET_NODE_CONFIG_OPS_CMDID,
1648 	WMI_10_2_FORCE_FW_HANG_CMDID,
1649 	WMI_10_2_PDEV_SET_ANTENNA_SWITCH_TABLE_CMDID,
1650 	WMI_10_2_PDEV_SET_CTL_TABLE_CMDID,
1651 	WMI_10_2_PDEV_SET_MIMOGAIN_TABLE_CMDID,
1652 	WMI_10_2_PDEV_RATEPWR_TABLE_CMDID,
1653 	WMI_10_2_PDEV_RATEPWR_CHAINMSK_TABLE_CMDID,
1654 	WMI_10_2_PDEV_GET_INFO,
1655 	WMI_10_2_VDEV_GET_INFO,
1656 	WMI_10_2_VDEV_ATF_REQUEST_CMDID,
1657 	WMI_10_2_PEER_ATF_REQUEST_CMDID,
1658 	WMI_10_2_PDEV_GET_TEMPERATURE_CMDID,
1659 	WMI_10_2_MU_CAL_START_CMDID,
1660 	WMI_10_2_SET_LTEU_CONFIG_CMDID,
1661 	WMI_10_2_SET_CCA_PARAMS,
1662 	WMI_10_2_PDEV_BSS_CHAN_INFO_REQUEST_CMDID,
1663 	WMI_10_2_FWTEST_CMDID,
1664 	WMI_10_2_PDEV_SET_BB_TIMING_CONFIG_CMDID,
1665 	WMI_10_2_PDEV_UTF_CMDID = WMI_10_2_END_CMDID - 1,
1666 };
1667 
1668 enum wmi_10_2_event_id {
1669 	WMI_10_2_SERVICE_READY_EVENTID = 0x8000,
1670 	WMI_10_2_READY_EVENTID,
1671 	WMI_10_2_DEBUG_MESG_EVENTID,
1672 	WMI_10_2_START_EVENTID = 0x9000,
1673 	WMI_10_2_END_EVENTID = 0x9FFF,
1674 	WMI_10_2_SCAN_EVENTID = WMI_10_2_START_EVENTID,
1675 	WMI_10_2_ECHO_EVENTID,
1676 	WMI_10_2_UPDATE_STATS_EVENTID,
1677 	WMI_10_2_INST_RSSI_STATS_EVENTID,
1678 	WMI_10_2_VDEV_START_RESP_EVENTID,
1679 	WMI_10_2_VDEV_STANDBY_REQ_EVENTID,
1680 	WMI_10_2_VDEV_RESUME_REQ_EVENTID,
1681 	WMI_10_2_VDEV_STOPPED_EVENTID,
1682 	WMI_10_2_PEER_STA_KICKOUT_EVENTID,
1683 	WMI_10_2_HOST_SWBA_EVENTID,
1684 	WMI_10_2_TBTTOFFSET_UPDATE_EVENTID,
1685 	WMI_10_2_MGMT_RX_EVENTID,
1686 	WMI_10_2_CHAN_INFO_EVENTID,
1687 	WMI_10_2_PHYERR_EVENTID,
1688 	WMI_10_2_ROAM_EVENTID,
1689 	WMI_10_2_PROFILE_MATCH,
1690 	WMI_10_2_DEBUG_PRINT_EVENTID,
1691 	WMI_10_2_PDEV_QVIT_EVENTID,
1692 	WMI_10_2_WLAN_PROFILE_DATA_EVENTID,
1693 	WMI_10_2_RTT_MEASUREMENT_REPORT_EVENTID,
1694 	WMI_10_2_TSF_MEASUREMENT_REPORT_EVENTID,
1695 	WMI_10_2_RTT_ERROR_REPORT_EVENTID,
1696 	WMI_10_2_RTT_KEEPALIVE_EVENTID,
1697 	WMI_10_2_WOW_WAKEUP_HOST_EVENTID,
1698 	WMI_10_2_DCS_INTERFERENCE_EVENTID,
1699 	WMI_10_2_PDEV_TPC_CONFIG_EVENTID,
1700 	WMI_10_2_GPIO_INPUT_EVENTID,
1701 	WMI_10_2_PEER_RATECODE_LIST_EVENTID,
1702 	WMI_10_2_GENERIC_BUFFER_EVENTID,
1703 	WMI_10_2_MCAST_BUF_RELEASE_EVENTID,
1704 	WMI_10_2_MCAST_LIST_AGEOUT_EVENTID,
1705 	WMI_10_2_WDS_PEER_EVENTID,
1706 	WMI_10_2_PEER_STA_PS_STATECHG_EVENTID,
1707 	WMI_10_2_PDEV_TEMPERATURE_EVENTID,
1708 	WMI_10_2_MU_REPORT_EVENTID,
1709 	WMI_10_2_PDEV_BSS_CHAN_INFO_EVENTID,
1710 	WMI_10_2_PDEV_UTF_EVENTID = WMI_10_2_END_EVENTID - 1,
1711 };
1712 
1713 enum wmi_10_4_cmd_id {
1714 	WMI_10_4_START_CMDID = 0x9000,
1715 	WMI_10_4_END_CMDID = 0x9FFF,
1716 	WMI_10_4_INIT_CMDID,
1717 	WMI_10_4_START_SCAN_CMDID = WMI_10_4_START_CMDID,
1718 	WMI_10_4_STOP_SCAN_CMDID,
1719 	WMI_10_4_SCAN_CHAN_LIST_CMDID,
1720 	WMI_10_4_SCAN_SCH_PRIO_TBL_CMDID,
1721 	WMI_10_4_SCAN_UPDATE_REQUEST_CMDID,
1722 	WMI_10_4_ECHO_CMDID,
1723 	WMI_10_4_PDEV_SET_REGDOMAIN_CMDID,
1724 	WMI_10_4_PDEV_SET_CHANNEL_CMDID,
1725 	WMI_10_4_PDEV_SET_PARAM_CMDID,
1726 	WMI_10_4_PDEV_PKTLOG_ENABLE_CMDID,
1727 	WMI_10_4_PDEV_PKTLOG_DISABLE_CMDID,
1728 	WMI_10_4_PDEV_SET_WMM_PARAMS_CMDID,
1729 	WMI_10_4_PDEV_SET_HT_CAP_IE_CMDID,
1730 	WMI_10_4_PDEV_SET_VHT_CAP_IE_CMDID,
1731 	WMI_10_4_PDEV_SET_BASE_MACADDR_CMDID,
1732 	WMI_10_4_PDEV_SET_DSCP_TID_MAP_CMDID,
1733 	WMI_10_4_PDEV_SET_QUIET_MODE_CMDID,
1734 	WMI_10_4_PDEV_GREEN_AP_PS_ENABLE_CMDID,
1735 	WMI_10_4_PDEV_GET_TPC_CONFIG_CMDID,
1736 	WMI_10_4_VDEV_CREATE_CMDID,
1737 	WMI_10_4_VDEV_DELETE_CMDID,
1738 	WMI_10_4_VDEV_START_REQUEST_CMDID,
1739 	WMI_10_4_VDEV_RESTART_REQUEST_CMDID,
1740 	WMI_10_4_VDEV_UP_CMDID,
1741 	WMI_10_4_VDEV_STOP_CMDID,
1742 	WMI_10_4_VDEV_DOWN_CMDID,
1743 	WMI_10_4_VDEV_STANDBY_RESPONSE_CMDID,
1744 	WMI_10_4_VDEV_RESUME_RESPONSE_CMDID,
1745 	WMI_10_4_VDEV_SET_PARAM_CMDID,
1746 	WMI_10_4_VDEV_INSTALL_KEY_CMDID,
1747 	WMI_10_4_WLAN_PEER_CACHING_ADD_PEER_CMDID,
1748 	WMI_10_4_WLAN_PEER_CACHING_EVICT_PEER_CMDID,
1749 	WMI_10_4_WLAN_PEER_CACHING_RESTORE_PEER_CMDID,
1750 	WMI_10_4_WLAN_PEER_CACHING_PRINT_ALL_PEERS_INFO_CMDID,
1751 	WMI_10_4_PEER_CREATE_CMDID,
1752 	WMI_10_4_PEER_DELETE_CMDID,
1753 	WMI_10_4_PEER_FLUSH_TIDS_CMDID,
1754 	WMI_10_4_PEER_SET_PARAM_CMDID,
1755 	WMI_10_4_PEER_ASSOC_CMDID,
1756 	WMI_10_4_PEER_ADD_WDS_ENTRY_CMDID,
1757 	WMI_10_4_PEER_UPDATE_WDS_ENTRY_CMDID,
1758 	WMI_10_4_PEER_REMOVE_WDS_ENTRY_CMDID,
1759 	WMI_10_4_PEER_ADD_PROXY_STA_ENTRY_CMDID,
1760 	WMI_10_4_PEER_MCAST_GROUP_CMDID,
1761 	WMI_10_4_BCN_TX_CMDID,
1762 	WMI_10_4_PDEV_SEND_BCN_CMDID,
1763 	WMI_10_4_BCN_PRB_TMPL_CMDID,
1764 	WMI_10_4_BCN_FILTER_RX_CMDID,
1765 	WMI_10_4_PRB_REQ_FILTER_RX_CMDID,
1766 	WMI_10_4_MGMT_TX_CMDID,
1767 	WMI_10_4_PRB_TMPL_CMDID,
1768 	WMI_10_4_ADDBA_CLEAR_RESP_CMDID,
1769 	WMI_10_4_ADDBA_SEND_CMDID,
1770 	WMI_10_4_ADDBA_STATUS_CMDID,
1771 	WMI_10_4_DELBA_SEND_CMDID,
1772 	WMI_10_4_ADDBA_SET_RESP_CMDID,
1773 	WMI_10_4_SEND_SINGLEAMSDU_CMDID,
1774 	WMI_10_4_STA_POWERSAVE_MODE_CMDID,
1775 	WMI_10_4_STA_POWERSAVE_PARAM_CMDID,
1776 	WMI_10_4_STA_MIMO_PS_MODE_CMDID,
1777 	WMI_10_4_DBGLOG_CFG_CMDID,
1778 	WMI_10_4_PDEV_DFS_ENABLE_CMDID,
1779 	WMI_10_4_PDEV_DFS_DISABLE_CMDID,
1780 	WMI_10_4_PDEV_QVIT_CMDID,
1781 	WMI_10_4_ROAM_SCAN_MODE,
1782 	WMI_10_4_ROAM_SCAN_RSSI_THRESHOLD,
1783 	WMI_10_4_ROAM_SCAN_PERIOD,
1784 	WMI_10_4_ROAM_SCAN_RSSI_CHANGE_THRESHOLD,
1785 	WMI_10_4_ROAM_AP_PROFILE,
1786 	WMI_10_4_OFL_SCAN_ADD_AP_PROFILE,
1787 	WMI_10_4_OFL_SCAN_REMOVE_AP_PROFILE,
1788 	WMI_10_4_OFL_SCAN_PERIOD,
1789 	WMI_10_4_P2P_DEV_SET_DEVICE_INFO,
1790 	WMI_10_4_P2P_DEV_SET_DISCOVERABILITY,
1791 	WMI_10_4_P2P_GO_SET_BEACON_IE,
1792 	WMI_10_4_P2P_GO_SET_PROBE_RESP_IE,
1793 	WMI_10_4_P2P_SET_VENDOR_IE_DATA_CMDID,
1794 	WMI_10_4_AP_PS_PEER_PARAM_CMDID,
1795 	WMI_10_4_AP_PS_PEER_UAPSD_COEX_CMDID,
1796 	WMI_10_4_PEER_RATE_RETRY_SCHED_CMDID,
1797 	WMI_10_4_WLAN_PROFILE_TRIGGER_CMDID,
1798 	WMI_10_4_WLAN_PROFILE_SET_HIST_INTVL_CMDID,
1799 	WMI_10_4_WLAN_PROFILE_GET_PROFILE_DATA_CMDID,
1800 	WMI_10_4_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID,
1801 	WMI_10_4_WLAN_PROFILE_LIST_PROFILE_ID_CMDID,
1802 	WMI_10_4_PDEV_SUSPEND_CMDID,
1803 	WMI_10_4_PDEV_RESUME_CMDID,
1804 	WMI_10_4_ADD_BCN_FILTER_CMDID,
1805 	WMI_10_4_RMV_BCN_FILTER_CMDID,
1806 	WMI_10_4_WOW_ADD_WAKE_PATTERN_CMDID,
1807 	WMI_10_4_WOW_DEL_WAKE_PATTERN_CMDID,
1808 	WMI_10_4_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID,
1809 	WMI_10_4_WOW_ENABLE_CMDID,
1810 	WMI_10_4_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID,
1811 	WMI_10_4_RTT_MEASREQ_CMDID,
1812 	WMI_10_4_RTT_TSF_CMDID,
1813 	WMI_10_4_RTT_KEEPALIVE_CMDID,
1814 	WMI_10_4_OEM_REQ_CMDID,
1815 	WMI_10_4_NAN_CMDID,
1816 	WMI_10_4_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID,
1817 	WMI_10_4_VDEV_SPECTRAL_SCAN_ENABLE_CMDID,
1818 	WMI_10_4_REQUEST_STATS_CMDID,
1819 	WMI_10_4_GPIO_CONFIG_CMDID,
1820 	WMI_10_4_GPIO_OUTPUT_CMDID,
1821 	WMI_10_4_VDEV_RATEMASK_CMDID,
1822 	WMI_10_4_CSA_OFFLOAD_ENABLE_CMDID,
1823 	WMI_10_4_GTK_OFFLOAD_CMDID,
1824 	WMI_10_4_QBOOST_CFG_CMDID,
1825 	WMI_10_4_CSA_OFFLOAD_CHANSWITCH_CMDID,
1826 	WMI_10_4_PDEV_SMART_ANT_ENABLE_CMDID,
1827 	WMI_10_4_PDEV_SMART_ANT_SET_RX_ANTENNA_CMDID,
1828 	WMI_10_4_PEER_SMART_ANT_SET_TX_ANTENNA_CMDID,
1829 	WMI_10_4_PEER_SMART_ANT_SET_TRAIN_INFO_CMDID,
1830 	WMI_10_4_PEER_SMART_ANT_SET_NODE_CONFIG_OPS_CMDID,
1831 	WMI_10_4_VDEV_SET_KEEPALIVE_CMDID,
1832 	WMI_10_4_VDEV_GET_KEEPALIVE_CMDID,
1833 	WMI_10_4_FORCE_FW_HANG_CMDID,
1834 	WMI_10_4_PDEV_SET_ANTENNA_SWITCH_TABLE_CMDID,
1835 	WMI_10_4_PDEV_SET_CTL_TABLE_CMDID,
1836 	WMI_10_4_PDEV_SET_MIMOGAIN_TABLE_CMDID,
1837 	WMI_10_4_PDEV_RATEPWR_TABLE_CMDID,
1838 	WMI_10_4_PDEV_RATEPWR_CHAINMSK_TABLE_CMDID,
1839 	WMI_10_4_PDEV_FIPS_CMDID,
1840 	WMI_10_4_TT_SET_CONF_CMDID,
1841 	WMI_10_4_FWTEST_CMDID,
1842 	WMI_10_4_VDEV_ATF_REQUEST_CMDID,
1843 	WMI_10_4_PEER_ATF_REQUEST_CMDID,
1844 	WMI_10_4_PDEV_GET_ANI_CCK_CONFIG_CMDID,
1845 	WMI_10_4_PDEV_GET_ANI_OFDM_CONFIG_CMDID,
1846 	WMI_10_4_PDEV_RESERVE_AST_ENTRY_CMDID,
1847 	WMI_10_4_PDEV_GET_NFCAL_POWER_CMDID,
1848 	WMI_10_4_PDEV_GET_TPC_CMDID,
1849 	WMI_10_4_PDEV_GET_AST_INFO_CMDID,
1850 	WMI_10_4_VDEV_SET_DSCP_TID_MAP_CMDID,
1851 	WMI_10_4_PDEV_GET_TEMPERATURE_CMDID,
1852 	WMI_10_4_PDEV_GET_INFO_CMDID,
1853 	WMI_10_4_VDEV_GET_INFO_CMDID,
1854 	WMI_10_4_VDEV_FILTER_NEIGHBOR_RX_PACKETS_CMDID,
1855 	WMI_10_4_MU_CAL_START_CMDID,
1856 	WMI_10_4_SET_CCA_PARAMS_CMDID,
1857 	WMI_10_4_PDEV_BSS_CHAN_INFO_REQUEST_CMDID,
1858 	WMI_10_4_EXT_RESOURCE_CFG_CMDID,
1859 	WMI_10_4_VDEV_SET_IE_CMDID,
1860 	WMI_10_4_SET_LTEU_CONFIG_CMDID,
1861 	WMI_10_4_ATF_SSID_GROUPING_REQUEST_CMDID,
1862 	WMI_10_4_PEER_ATF_EXT_REQUEST_CMDID,
1863 	WMI_10_4_SET_PERIODIC_CHANNEL_STATS_CONFIG,
1864 	WMI_10_4_PEER_BWF_REQUEST_CMDID,
1865 	WMI_10_4_BTCOEX_CFG_CMDID,
1866 	WMI_10_4_PEER_TX_MU_TXMIT_COUNT_CMDID,
1867 	WMI_10_4_PEER_TX_MU_TXMIT_RSTCNT_CMDID,
1868 	WMI_10_4_PEER_GID_USERPOS_LIST_CMDID,
1869 	WMI_10_4_PDEV_CHECK_CAL_VERSION_CMDID,
1870 	WMI_10_4_COEX_VERSION_CFG_CMID,
1871 	WMI_10_4_PDEV_GET_RX_FILTER_CMDID,
1872 	WMI_10_4_PDEV_EXTENDED_NSS_CFG_CMDID,
1873 	WMI_10_4_VDEV_SET_SCAN_NAC_RSSI_CMDID,
1874 	WMI_10_4_PROG_GPIO_BAND_SELECT_CMDID,
1875 	WMI_10_4_CONFIG_SMART_LOGGING_CMDID,
1876 	WMI_10_4_DEBUG_FATAL_CONDITION_CMDID,
1877 	WMI_10_4_GET_TSF_TIMER_CMDID,
1878 	WMI_10_4_PDEV_GET_TPC_TABLE_CMDID,
1879 	WMI_10_4_VDEV_SIFS_TRIGGER_TIME_CMDID,
1880 	WMI_10_4_PDEV_WDS_ENTRY_LIST_CMDID,
1881 	WMI_10_4_TDLS_SET_STATE_CMDID,
1882 	WMI_10_4_TDLS_PEER_UPDATE_CMDID,
1883 	WMI_10_4_TDLS_SET_OFFCHAN_MODE_CMDID,
1884 	WMI_10_4_PDEV_SEND_FD_CMDID,
1885 	WMI_10_4_ENABLE_FILS_CMDID,
1886 	WMI_10_4_PDEV_SET_BRIDGE_MACADDR_CMDID,
1887 	WMI_10_4_ATF_GROUP_WMM_AC_CONFIG_REQUEST_CMDID,
1888 	WMI_10_4_RADAR_FOUND_CMDID,
1889 	WMI_10_4_PEER_CFR_CAPTURE_CMDID,
1890 	WMI_10_4_PER_PEER_PER_TID_CONFIG_CMDID,
1891 	WMI_10_4_PDEV_UTF_CMDID = WMI_10_4_END_CMDID - 1,
1892 };
1893 
1894 enum wmi_10_4_event_id {
1895 	WMI_10_4_SERVICE_READY_EVENTID = 0x8000,
1896 	WMI_10_4_READY_EVENTID,
1897 	WMI_10_4_DEBUG_MESG_EVENTID,
1898 	WMI_10_4_START_EVENTID = 0x9000,
1899 	WMI_10_4_END_EVENTID = 0x9FFF,
1900 	WMI_10_4_SCAN_EVENTID = WMI_10_4_START_EVENTID,
1901 	WMI_10_4_ECHO_EVENTID,
1902 	WMI_10_4_UPDATE_STATS_EVENTID,
1903 	WMI_10_4_INST_RSSI_STATS_EVENTID,
1904 	WMI_10_4_VDEV_START_RESP_EVENTID,
1905 	WMI_10_4_VDEV_STANDBY_REQ_EVENTID,
1906 	WMI_10_4_VDEV_RESUME_REQ_EVENTID,
1907 	WMI_10_4_VDEV_STOPPED_EVENTID,
1908 	WMI_10_4_PEER_STA_KICKOUT_EVENTID,
1909 	WMI_10_4_HOST_SWBA_EVENTID,
1910 	WMI_10_4_TBTTOFFSET_UPDATE_EVENTID,
1911 	WMI_10_4_MGMT_RX_EVENTID,
1912 	WMI_10_4_CHAN_INFO_EVENTID,
1913 	WMI_10_4_PHYERR_EVENTID,
1914 	WMI_10_4_ROAM_EVENTID,
1915 	WMI_10_4_PROFILE_MATCH,
1916 	WMI_10_4_DEBUG_PRINT_EVENTID,
1917 	WMI_10_4_PDEV_QVIT_EVENTID,
1918 	WMI_10_4_WLAN_PROFILE_DATA_EVENTID,
1919 	WMI_10_4_RTT_MEASUREMENT_REPORT_EVENTID,
1920 	WMI_10_4_TSF_MEASUREMENT_REPORT_EVENTID,
1921 	WMI_10_4_RTT_ERROR_REPORT_EVENTID,
1922 	WMI_10_4_RTT_KEEPALIVE_EVENTID,
1923 	WMI_10_4_OEM_CAPABILITY_EVENTID,
1924 	WMI_10_4_OEM_MEASUREMENT_REPORT_EVENTID,
1925 	WMI_10_4_OEM_ERROR_REPORT_EVENTID,
1926 	WMI_10_4_NAN_EVENTID,
1927 	WMI_10_4_WOW_WAKEUP_HOST_EVENTID,
1928 	WMI_10_4_GTK_OFFLOAD_STATUS_EVENTID,
1929 	WMI_10_4_GTK_REKEY_FAIL_EVENTID,
1930 	WMI_10_4_DCS_INTERFERENCE_EVENTID,
1931 	WMI_10_4_PDEV_TPC_CONFIG_EVENTID,
1932 	WMI_10_4_CSA_HANDLING_EVENTID,
1933 	WMI_10_4_GPIO_INPUT_EVENTID,
1934 	WMI_10_4_PEER_RATECODE_LIST_EVENTID,
1935 	WMI_10_4_GENERIC_BUFFER_EVENTID,
1936 	WMI_10_4_MCAST_BUF_RELEASE_EVENTID,
1937 	WMI_10_4_MCAST_LIST_AGEOUT_EVENTID,
1938 	WMI_10_4_VDEV_GET_KEEPALIVE_EVENTID,
1939 	WMI_10_4_WDS_PEER_EVENTID,
1940 	WMI_10_4_PEER_STA_PS_STATECHG_EVENTID,
1941 	WMI_10_4_PDEV_FIPS_EVENTID,
1942 	WMI_10_4_TT_STATS_EVENTID,
1943 	WMI_10_4_PDEV_CHANNEL_HOPPING_EVENTID,
1944 	WMI_10_4_PDEV_ANI_CCK_LEVEL_EVENTID,
1945 	WMI_10_4_PDEV_ANI_OFDM_LEVEL_EVENTID,
1946 	WMI_10_4_PDEV_RESERVE_AST_ENTRY_EVENTID,
1947 	WMI_10_4_PDEV_NFCAL_POWER_EVENTID,
1948 	WMI_10_4_PDEV_TPC_EVENTID,
1949 	WMI_10_4_PDEV_GET_AST_INFO_EVENTID,
1950 	WMI_10_4_PDEV_TEMPERATURE_EVENTID,
1951 	WMI_10_4_PDEV_NFCAL_POWER_ALL_CHANNELS_EVENTID,
1952 	WMI_10_4_PDEV_BSS_CHAN_INFO_EVENTID,
1953 	WMI_10_4_MU_REPORT_EVENTID,
1954 	WMI_10_4_TX_DATA_TRAFFIC_CTRL_EVENTID,
1955 	WMI_10_4_PEER_TX_MU_TXMIT_COUNT_EVENTID,
1956 	WMI_10_4_PEER_GID_USERPOS_LIST_EVENTID,
1957 	WMI_10_4_PDEV_CHECK_CAL_VERSION_EVENTID,
1958 	WMI_10_4_ATF_PEER_STATS_EVENTID,
1959 	WMI_10_4_PDEV_GET_RX_FILTER_EVENTID,
1960 	WMI_10_4_NAC_RSSI_EVENTID,
1961 	WMI_10_4_DEBUG_FATAL_CONDITION_EVENTID,
1962 	WMI_10_4_GET_TSF_TIMER_RESP_EVENTID,
1963 	WMI_10_4_PDEV_TPC_TABLE_EVENTID,
1964 	WMI_10_4_PDEV_WDS_ENTRY_LIST_EVENTID,
1965 	WMI_10_4_TDLS_PEER_EVENTID,
1966 	WMI_10_4_HOST_SWFDA_EVENTID,
1967 	WMI_10_4_ESP_ESTIMATE_EVENTID,
1968 	WMI_10_4_DFS_STATUS_CHECK_EVENTID,
1969 	WMI_10_4_PDEV_UTF_EVENTID = WMI_10_4_END_EVENTID - 1,
1970 };
1971 
1972 enum wmi_phy_mode {
1973 	MODE_11A        = 0,   /* 11a Mode */
1974 	MODE_11G        = 1,   /* 11b/g Mode */
1975 	MODE_11B        = 2,   /* 11b Mode */
1976 	MODE_11GONLY    = 3,   /* 11g only Mode */
1977 	MODE_11NA_HT20   = 4,  /* 11a HT20 mode */
1978 	MODE_11NG_HT20   = 5,  /* 11g HT20 mode */
1979 	MODE_11NA_HT40   = 6,  /* 11a HT40 mode */
1980 	MODE_11NG_HT40   = 7,  /* 11g HT40 mode */
1981 	MODE_11AC_VHT20 = 8,
1982 	MODE_11AC_VHT40 = 9,
1983 	MODE_11AC_VHT80 = 10,
1984 	/*    MODE_11AC_VHT160 = 11, */
1985 	MODE_11AC_VHT20_2G = 11,
1986 	MODE_11AC_VHT40_2G = 12,
1987 	MODE_11AC_VHT80_2G = 13,
1988 	MODE_11AC_VHT80_80 = 14,
1989 	MODE_11AC_VHT160 = 15,
1990 	MODE_UNKNOWN    = 16,
1991 	MODE_MAX        = 16
1992 };
1993 
ath10k_wmi_phymode_str(enum wmi_phy_mode mode)1994 static inline const char *ath10k_wmi_phymode_str(enum wmi_phy_mode mode)
1995 {
1996 	switch (mode) {
1997 	case MODE_11A:
1998 		return "11a";
1999 	case MODE_11G:
2000 		return "11g";
2001 	case MODE_11B:
2002 		return "11b";
2003 	case MODE_11GONLY:
2004 		return "11gonly";
2005 	case MODE_11NA_HT20:
2006 		return "11na-ht20";
2007 	case MODE_11NG_HT20:
2008 		return "11ng-ht20";
2009 	case MODE_11NA_HT40:
2010 		return "11na-ht40";
2011 	case MODE_11NG_HT40:
2012 		return "11ng-ht40";
2013 	case MODE_11AC_VHT20:
2014 		return "11ac-vht20";
2015 	case MODE_11AC_VHT40:
2016 		return "11ac-vht40";
2017 	case MODE_11AC_VHT80:
2018 		return "11ac-vht80";
2019 	case MODE_11AC_VHT160:
2020 		return "11ac-vht160";
2021 	case MODE_11AC_VHT80_80:
2022 		return "11ac-vht80+80";
2023 	case MODE_11AC_VHT20_2G:
2024 		return "11ac-vht20-2g";
2025 	case MODE_11AC_VHT40_2G:
2026 		return "11ac-vht40-2g";
2027 	case MODE_11AC_VHT80_2G:
2028 		return "11ac-vht80-2g";
2029 	case MODE_UNKNOWN:
2030 		/* skip */
2031 		break;
2032 
2033 		/* no default handler to allow compiler to check that the
2034 		 * enum is fully handled
2035 		 */
2036 	}
2037 
2038 	return "<unknown>";
2039 }
2040 
2041 #define WMI_CHAN_LIST_TAG	0x1
2042 #define WMI_SSID_LIST_TAG	0x2
2043 #define WMI_BSSID_LIST_TAG	0x3
2044 #define WMI_IE_TAG		0x4
2045 
2046 struct wmi_channel {
2047 	__le32 mhz;
2048 	__le32 band_center_freq1;
2049 	__le32 band_center_freq2; /* valid for 11ac, 80plus80 */
2050 	union {
2051 		__le32 flags; /* WMI_CHAN_FLAG_ */
2052 		struct {
2053 			u8 mode; /* only 6 LSBs */
2054 		} __packed;
2055 	} __packed;
2056 	union {
2057 		__le32 reginfo0;
2058 		struct {
2059 			/* note: power unit is 0.5 dBm */
2060 			u8 min_power;
2061 			u8 max_power;
2062 			u8 reg_power;
2063 			u8 reg_classid;
2064 		} __packed;
2065 	} __packed;
2066 	union {
2067 		__le32 reginfo1;
2068 		struct {
2069 			u8 antenna_max;
2070 			u8 max_tx_power;
2071 		} __packed;
2072 	} __packed;
2073 } __packed;
2074 
2075 struct wmi_channel_arg {
2076 	u32 freq;
2077 	u32 band_center_freq1;
2078 	u32 band_center_freq2;
2079 	bool passive;
2080 	bool allow_ibss;
2081 	bool allow_ht;
2082 	bool allow_vht;
2083 	bool ht40plus;
2084 	bool chan_radar;
2085 	/* note: power unit is 0.5 dBm */
2086 	u32 min_power;
2087 	u32 max_power;
2088 	u32 max_reg_power;
2089 	u32 max_antenna_gain;
2090 	u32 reg_class_id;
2091 	enum wmi_phy_mode mode;
2092 };
2093 
2094 enum wmi_channel_change_cause {
2095 	WMI_CHANNEL_CHANGE_CAUSE_NONE = 0,
2096 	WMI_CHANNEL_CHANGE_CAUSE_CSA,
2097 };
2098 
2099 #define WMI_CHAN_FLAG_HT40_PLUS      (1 << 6)
2100 #define WMI_CHAN_FLAG_PASSIVE        (1 << 7)
2101 #define WMI_CHAN_FLAG_ADHOC_ALLOWED  (1 << 8)
2102 #define WMI_CHAN_FLAG_AP_DISABLED    (1 << 9)
2103 #define WMI_CHAN_FLAG_DFS            (1 << 10)
2104 #define WMI_CHAN_FLAG_ALLOW_HT       (1 << 11)
2105 #define WMI_CHAN_FLAG_ALLOW_VHT      (1 << 12)
2106 
2107 /* Indicate reason for channel switch */
2108 #define WMI_CHANNEL_CHANGE_CAUSE_CSA (1 << 13)
2109 /* DFS required on channel for 2nd segment of VHT160 and VHT80+80*/
2110 #define WMI_CHAN_FLAG_DFS_CFREQ2  (1 << 15)
2111 #define WMI_MAX_SPATIAL_STREAM        3 /* default max ss */
2112 
2113 /* HT Capabilities*/
2114 #define WMI_HT_CAP_ENABLED                0x0001   /* HT Enabled/ disabled */
2115 #define WMI_HT_CAP_HT20_SGI       0x0002   /* Short Guard Interval with HT20 */
2116 #define WMI_HT_CAP_DYNAMIC_SMPS           0x0004   /* Dynamic MIMO powersave */
2117 #define WMI_HT_CAP_TX_STBC                0x0008   /* B3 TX STBC */
2118 #define WMI_HT_CAP_TX_STBC_MASK_SHIFT     3
2119 #define WMI_HT_CAP_RX_STBC                0x0030   /* B4-B5 RX STBC */
2120 #define WMI_HT_CAP_RX_STBC_MASK_SHIFT     4
2121 #define WMI_HT_CAP_LDPC                   0x0040   /* LDPC supported */
2122 #define WMI_HT_CAP_L_SIG_TXOP_PROT        0x0080   /* L-SIG TXOP Protection */
2123 #define WMI_HT_CAP_MPDU_DENSITY           0x0700   /* MPDU Density */
2124 #define WMI_HT_CAP_MPDU_DENSITY_MASK_SHIFT 8
2125 #define WMI_HT_CAP_HT40_SGI               0x0800
2126 #define WMI_HT_CAP_RX_LDPC                0x1000   /* LDPC RX support */
2127 #define WMI_HT_CAP_TX_LDPC                0x2000   /* LDPC TX support */
2128 
2129 #define WMI_HT_CAP_DEFAULT_ALL (WMI_HT_CAP_ENABLED       | \
2130 				WMI_HT_CAP_HT20_SGI      | \
2131 				WMI_HT_CAP_HT40_SGI      | \
2132 				WMI_HT_CAP_TX_STBC       | \
2133 				WMI_HT_CAP_RX_STBC       | \
2134 				WMI_HT_CAP_LDPC)
2135 
2136 /*
2137  * WMI_VHT_CAP_* these maps to ieee 802.11ac vht capability information
2138  * field. The fields not defined here are not supported, or reserved.
2139  * Do not change these masks and if you have to add new one follow the
2140  * bitmask as specified by 802.11ac draft.
2141  */
2142 
2143 #define WMI_VHT_CAP_MAX_MPDU_LEN_MASK            0x00000003
2144 #define WMI_VHT_CAP_RX_LDPC                      0x00000010
2145 #define WMI_VHT_CAP_SGI_80MHZ                    0x00000020
2146 #define WMI_VHT_CAP_SGI_160MHZ                   0x00000040
2147 #define WMI_VHT_CAP_TX_STBC                      0x00000080
2148 #define WMI_VHT_CAP_RX_STBC_MASK                 0x00000300
2149 #define WMI_VHT_CAP_RX_STBC_MASK_SHIFT           8
2150 #define WMI_VHT_CAP_SU_BFER                      0x00000800
2151 #define WMI_VHT_CAP_SU_BFEE                      0x00001000
2152 #define WMI_VHT_CAP_MAX_CS_ANT_MASK              0x0000E000
2153 #define WMI_VHT_CAP_MAX_CS_ANT_MASK_SHIFT        13
2154 #define WMI_VHT_CAP_MAX_SND_DIM_MASK             0x00070000
2155 #define WMI_VHT_CAP_MAX_SND_DIM_MASK_SHIFT       16
2156 #define WMI_VHT_CAP_MU_BFER                      0x00080000
2157 #define WMI_VHT_CAP_MU_BFEE                      0x00100000
2158 #define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP            0x03800000
2159 #define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP_SHIFT      23
2160 #define WMI_VHT_CAP_RX_FIXED_ANT                 0x10000000
2161 #define WMI_VHT_CAP_TX_FIXED_ANT                 0x20000000
2162 
2163 /* The following also refer for max HT AMSDU */
2164 #define WMI_VHT_CAP_MAX_MPDU_LEN_3839            0x00000000
2165 #define WMI_VHT_CAP_MAX_MPDU_LEN_7935            0x00000001
2166 #define WMI_VHT_CAP_MAX_MPDU_LEN_11454           0x00000002
2167 
2168 #define WMI_VHT_CAP_DEFAULT_ALL (WMI_VHT_CAP_MAX_MPDU_LEN_11454  | \
2169 				 WMI_VHT_CAP_RX_LDPC             | \
2170 				 WMI_VHT_CAP_SGI_80MHZ           | \
2171 				 WMI_VHT_CAP_TX_STBC             | \
2172 				 WMI_VHT_CAP_RX_STBC_MASK        | \
2173 				 WMI_VHT_CAP_MAX_AMPDU_LEN_EXP   | \
2174 				 WMI_VHT_CAP_RX_FIXED_ANT        | \
2175 				 WMI_VHT_CAP_TX_FIXED_ANT)
2176 
2177 /*
2178  * Interested readers refer to Rx/Tx MCS Map definition as defined in
2179  * 802.11ac
2180  */
2181 #define WMI_VHT_MAX_MCS_4_SS_MASK(r, ss)      ((3 & (r)) << (((ss) - 1) << 1))
2182 #define WMI_VHT_MAX_SUPP_RATE_MASK           0x1fff0000
2183 #define WMI_VHT_MAX_SUPP_RATE_MASK_SHIFT     16
2184 
2185 enum {
2186 	REGDMN_MODE_11A              = 0x00001, /* 11a channels */
2187 	REGDMN_MODE_TURBO            = 0x00002, /* 11a turbo-only channels */
2188 	REGDMN_MODE_11B              = 0x00004, /* 11b channels */
2189 	REGDMN_MODE_PUREG            = 0x00008, /* 11g channels (OFDM only) */
2190 	REGDMN_MODE_11G              = 0x00008, /* XXX historical */
2191 	REGDMN_MODE_108G             = 0x00020, /* 11a+Turbo channels */
2192 	REGDMN_MODE_108A             = 0x00040, /* 11g+Turbo channels */
2193 	REGDMN_MODE_XR               = 0x00100, /* XR channels */
2194 	REGDMN_MODE_11A_HALF_RATE    = 0x00200, /* 11A half rate channels */
2195 	REGDMN_MODE_11A_QUARTER_RATE = 0x00400, /* 11A quarter rate channels */
2196 	REGDMN_MODE_11NG_HT20        = 0x00800, /* 11N-G HT20 channels */
2197 	REGDMN_MODE_11NA_HT20        = 0x01000, /* 11N-A HT20 channels */
2198 	REGDMN_MODE_11NG_HT40PLUS    = 0x02000, /* 11N-G HT40 + channels */
2199 	REGDMN_MODE_11NG_HT40MINUS   = 0x04000, /* 11N-G HT40 - channels */
2200 	REGDMN_MODE_11NA_HT40PLUS    = 0x08000, /* 11N-A HT40 + channels */
2201 	REGDMN_MODE_11NA_HT40MINUS   = 0x10000, /* 11N-A HT40 - channels */
2202 	REGDMN_MODE_11AC_VHT20       = 0x20000, /* 5Ghz, VHT20 */
2203 	REGDMN_MODE_11AC_VHT40PLUS   = 0x40000, /* 5Ghz, VHT40 + channels */
2204 	REGDMN_MODE_11AC_VHT40MINUS  = 0x80000, /* 5Ghz  VHT40 - channels */
2205 	REGDMN_MODE_11AC_VHT80       = 0x100000, /* 5Ghz, VHT80 channels */
2206 	REGDMN_MODE_11AC_VHT160      = 0x200000,     /* 5Ghz, VHT160 channels */
2207 	REGDMN_MODE_11AC_VHT80_80    = 0x400000,     /* 5Ghz, VHT80+80 channels */
2208 	REGDMN_MODE_ALL              = 0xffffffff
2209 };
2210 
2211 #define REGDMN_CAP1_CHAN_HALF_RATE        0x00000001
2212 #define REGDMN_CAP1_CHAN_QUARTER_RATE     0x00000002
2213 #define REGDMN_CAP1_CHAN_HAL49GHZ         0x00000004
2214 
2215 /* regulatory capabilities */
2216 #define REGDMN_EEPROM_EEREGCAP_EN_FCC_MIDBAND   0x0040
2217 #define REGDMN_EEPROM_EEREGCAP_EN_KK_U1_EVEN    0x0080
2218 #define REGDMN_EEPROM_EEREGCAP_EN_KK_U2         0x0100
2219 #define REGDMN_EEPROM_EEREGCAP_EN_KK_MIDBAND    0x0200
2220 #define REGDMN_EEPROM_EEREGCAP_EN_KK_U1_ODD     0x0400
2221 #define REGDMN_EEPROM_EEREGCAP_EN_KK_NEW_11A    0x0800
2222 
2223 struct hal_reg_capabilities {
2224 	/* regdomain value specified in EEPROM */
2225 	__le32 eeprom_rd;
2226 	/*regdomain */
2227 	__le32 eeprom_rd_ext;
2228 	/* CAP1 capabilities bit map. */
2229 	__le32 regcap1;
2230 	/* REGDMN EEPROM CAP. */
2231 	__le32 regcap2;
2232 	/* REGDMN MODE */
2233 	__le32 wireless_modes;
2234 	__le32 low_2ghz_chan;
2235 	__le32 high_2ghz_chan;
2236 	__le32 low_5ghz_chan;
2237 	__le32 high_5ghz_chan;
2238 } __packed;
2239 
2240 enum wlan_mode_capability {
2241 	WHAL_WLAN_11A_CAPABILITY   = 0x1,
2242 	WHAL_WLAN_11G_CAPABILITY   = 0x2,
2243 	WHAL_WLAN_11AG_CAPABILITY  = 0x3,
2244 };
2245 
2246 /* structure used by FW for requesting host memory */
2247 struct wlan_host_mem_req {
2248 	/* ID of the request */
2249 	__le32 req_id;
2250 	/* size of the  of each unit */
2251 	__le32 unit_size;
2252 	/* flags to  indicate that
2253 	 * the number units is dependent
2254 	 * on number of resources(num vdevs num peers .. etc)
2255 	 */
2256 	__le32 num_unit_info;
2257 	/*
2258 	 * actual number of units to allocate . if flags in the num_unit_info
2259 	 * indicate that number of units is tied to number of a particular
2260 	 * resource to allocate then  num_units filed is set to 0 and host
2261 	 * will derive the number units from number of the resources it is
2262 	 * requesting.
2263 	 */
2264 	__le32 num_units;
2265 } __packed;
2266 
2267 /*
2268  * The following struct holds optional payload for
2269  * wmi_service_ready_event,e.g., 11ac pass some of the
2270  * device capability to the host.
2271  */
2272 struct wmi_service_ready_event {
2273 	__le32 sw_version;
2274 	__le32 sw_version_1;
2275 	__le32 abi_version;
2276 	/* WMI_PHY_CAPABILITY */
2277 	__le32 phy_capability;
2278 	/* Maximum number of frag table entries that SW will populate less 1 */
2279 	__le32 max_frag_entry;
2280 	__le32 wmi_service_bitmap[16];
2281 	__le32 num_rf_chains;
2282 	/*
2283 	 * The following field is only valid for service type
2284 	 * WMI_SERVICE_11AC
2285 	 */
2286 	__le32 ht_cap_info; /* WMI HT Capability */
2287 	__le32 vht_cap_info; /* VHT capability info field of 802.11ac */
2288 	__le32 vht_supp_mcs; /* VHT Supported MCS Set field Rx/Tx same */
2289 	__le32 hw_min_tx_power;
2290 	__le32 hw_max_tx_power;
2291 	struct hal_reg_capabilities hal_reg_capabilities;
2292 	__le32 sys_cap_info;
2293 	__le32 min_pkt_size_enable; /* Enterprise mode short pkt enable */
2294 	/*
2295 	 * Max beacon and Probe Response IE offload size
2296 	 * (includes optional P2P IEs)
2297 	 */
2298 	__le32 max_bcn_ie_size;
2299 	/*
2300 	 * request to host to allocate a chuck of memory and pss it down to FW
2301 	 * via WM_INIT. FW uses this as FW extesnsion memory for saving its
2302 	 * data structures. Only valid for low latency interfaces like PCIE
2303 	 * where FW can access this memory directly (or) by DMA.
2304 	 */
2305 	__le32 num_mem_reqs;
2306 	struct wlan_host_mem_req mem_reqs[];
2307 } __packed;
2308 
2309 /* This is the definition from 10.X firmware branch */
2310 struct wmi_10x_service_ready_event {
2311 	__le32 sw_version;
2312 	__le32 abi_version;
2313 
2314 	/* WMI_PHY_CAPABILITY */
2315 	__le32 phy_capability;
2316 
2317 	/* Maximum number of frag table entries that SW will populate less 1 */
2318 	__le32 max_frag_entry;
2319 	__le32 wmi_service_bitmap[16];
2320 	__le32 num_rf_chains;
2321 
2322 	/*
2323 	 * The following field is only valid for service type
2324 	 * WMI_SERVICE_11AC
2325 	 */
2326 	__le32 ht_cap_info; /* WMI HT Capability */
2327 	__le32 vht_cap_info; /* VHT capability info field of 802.11ac */
2328 	__le32 vht_supp_mcs; /* VHT Supported MCS Set field Rx/Tx same */
2329 	__le32 hw_min_tx_power;
2330 	__le32 hw_max_tx_power;
2331 
2332 	struct hal_reg_capabilities hal_reg_capabilities;
2333 
2334 	__le32 sys_cap_info;
2335 	__le32 min_pkt_size_enable; /* Enterprise mode short pkt enable */
2336 
2337 	/*
2338 	 * request to host to allocate a chuck of memory and pss it down to FW
2339 	 * via WM_INIT. FW uses this as FW extesnsion memory for saving its
2340 	 * data structures. Only valid for low latency interfaces like PCIE
2341 	 * where FW can access this memory directly (or) by DMA.
2342 	 */
2343 	__le32 num_mem_reqs;
2344 
2345 	struct wlan_host_mem_req mem_reqs[];
2346 } __packed;
2347 
2348 #define WMI_SERVICE_READY_TIMEOUT_HZ (5 * HZ)
2349 #define WMI_UNIFIED_READY_TIMEOUT_HZ (5 * HZ)
2350 
2351 struct wmi_ready_event {
2352 	__le32 sw_version;
2353 	__le32 abi_version;
2354 	struct wmi_mac_addr mac_addr;
2355 	__le32 status;
2356 } __packed;
2357 
2358 struct wmi_resource_config {
2359 	/* number of virtual devices (VAPs) to support */
2360 	__le32 num_vdevs;
2361 
2362 	/* number of peer nodes to support */
2363 	__le32 num_peers;
2364 
2365 	/*
2366 	 * In offload mode target supports features like WOW, chatter and
2367 	 * other protocol offloads. In order to support them some
2368 	 * functionalities like reorder buffering, PN checking need to be
2369 	 * done in target. This determines maximum number of peers supported
2370 	 * by target in offload mode
2371 	 */
2372 	__le32 num_offload_peers;
2373 
2374 	/* For target-based RX reordering */
2375 	__le32 num_offload_reorder_bufs;
2376 
2377 	/* number of keys per peer */
2378 	__le32 num_peer_keys;
2379 
2380 	/* total number of TX/RX data TIDs */
2381 	__le32 num_tids;
2382 
2383 	/*
2384 	 * max skid for resolving hash collisions
2385 	 *
2386 	 *   The address search table is sparse, so that if two MAC addresses
2387 	 *   result in the same hash value, the second of these conflicting
2388 	 *   entries can slide to the next index in the address search table,
2389 	 *   and use it, if it is unoccupied.  This ast_skid_limit parameter
2390 	 *   specifies the upper bound on how many subsequent indices to search
2391 	 *   over to find an unoccupied space.
2392 	 */
2393 	__le32 ast_skid_limit;
2394 
2395 	/*
2396 	 * the nominal chain mask for transmit
2397 	 *
2398 	 *   The chain mask may be modified dynamically, e.g. to operate AP
2399 	 *   tx with a reduced number of chains if no clients are associated.
2400 	 *   This configuration parameter specifies the nominal chain-mask that
2401 	 *   should be used when not operating with a reduced set of tx chains.
2402 	 */
2403 	__le32 tx_chain_mask;
2404 
2405 	/*
2406 	 * the nominal chain mask for receive
2407 	 *
2408 	 *   The chain mask may be modified dynamically, e.g. for a client
2409 	 *   to use a reduced number of chains for receive if the traffic to
2410 	 *   the client is low enough that it doesn't require downlink MIMO
2411 	 *   or antenna diversity.
2412 	 *   This configuration parameter specifies the nominal chain-mask that
2413 	 *   should be used when not operating with a reduced set of rx chains.
2414 	 */
2415 	__le32 rx_chain_mask;
2416 
2417 	/*
2418 	 * what rx reorder timeout (ms) to use for the AC
2419 	 *
2420 	 *   Each WMM access class (voice, video, best-effort, background) will
2421 	 *   have its own timeout value to dictate how long to wait for missing
2422 	 *   rx MPDUs to arrive before flushing subsequent MPDUs that have
2423 	 *   already been received.
2424 	 *   This parameter specifies the timeout in milliseconds for each
2425 	 *   class.
2426 	 */
2427 	__le32 rx_timeout_pri_vi;
2428 	__le32 rx_timeout_pri_vo;
2429 	__le32 rx_timeout_pri_be;
2430 	__le32 rx_timeout_pri_bk;
2431 
2432 	/*
2433 	 * what mode the rx should decap packets to
2434 	 *
2435 	 *   MAC can decap to RAW (no decap), native wifi or Ethernet types
2436 	 *   THis setting also determines the default TX behavior, however TX
2437 	 *   behavior can be modified on a per VAP basis during VAP init
2438 	 */
2439 	__le32 rx_decap_mode;
2440 
2441 	/* what is the maximum number of scan requests that can be queued */
2442 	__le32 scan_max_pending_reqs;
2443 
2444 	/* maximum VDEV that could use BMISS offload */
2445 	__le32 bmiss_offload_max_vdev;
2446 
2447 	/* maximum VDEV that could use offload roaming */
2448 	__le32 roam_offload_max_vdev;
2449 
2450 	/* maximum AP profiles that would push to offload roaming */
2451 	__le32 roam_offload_max_ap_profiles;
2452 
2453 	/*
2454 	 * how many groups to use for mcast->ucast conversion
2455 	 *
2456 	 *   The target's WAL maintains a table to hold information regarding
2457 	 *   which peers belong to a given multicast group, so that if
2458 	 *   multicast->unicast conversion is enabled, the target can convert
2459 	 *   multicast tx frames to a series of unicast tx frames, to each
2460 	 *   peer within the multicast group.
2461 	     This num_mcast_groups configuration parameter tells the target how
2462 	 *   many multicast groups to provide storage for within its multicast
2463 	 *   group membership table.
2464 	 */
2465 	__le32 num_mcast_groups;
2466 
2467 	/*
2468 	 * size to alloc for the mcast membership table
2469 	 *
2470 	 *   This num_mcast_table_elems configuration parameter tells the
2471 	 *   target how many peer elements it needs to provide storage for in
2472 	 *   its multicast group membership table.
2473 	 *   These multicast group membership table elements are shared by the
2474 	 *   multicast groups stored within the table.
2475 	 */
2476 	__le32 num_mcast_table_elems;
2477 
2478 	/*
2479 	 * whether/how to do multicast->unicast conversion
2480 	 *
2481 	 *   This configuration parameter specifies whether the target should
2482 	 *   perform multicast --> unicast conversion on transmit, and if so,
2483 	 *   what to do if it finds no entries in its multicast group
2484 	 *   membership table for the multicast IP address in the tx frame.
2485 	 *   Configuration value:
2486 	 *   0 -> Do not perform multicast to unicast conversion.
2487 	 *   1 -> Convert multicast frames to unicast, if the IP multicast
2488 	 *        address from the tx frame is found in the multicast group
2489 	 *        membership table.  If the IP multicast address is not found,
2490 	 *        drop the frame.
2491 	 *   2 -> Convert multicast frames to unicast, if the IP multicast
2492 	 *        address from the tx frame is found in the multicast group
2493 	 *        membership table.  If the IP multicast address is not found,
2494 	 *        transmit the frame as multicast.
2495 	 */
2496 	__le32 mcast2ucast_mode;
2497 
2498 	/*
2499 	 * how much memory to allocate for a tx PPDU dbg log
2500 	 *
2501 	 *   This parameter controls how much memory the target will allocate
2502 	 *   to store a log of tx PPDU meta-information (how large the PPDU
2503 	 *   was, when it was sent, whether it was successful, etc.)
2504 	 */
2505 	__le32 tx_dbg_log_size;
2506 
2507 	/* how many AST entries to be allocated for WDS */
2508 	__le32 num_wds_entries;
2509 
2510 	/*
2511 	 * MAC DMA burst size, e.g., For target PCI limit can be
2512 	 * 0 -default, 1 256B
2513 	 */
2514 	__le32 dma_burst_size;
2515 
2516 	/*
2517 	 * Fixed delimiters to be inserted after every MPDU to
2518 	 * account for interface latency to avoid underrun.
2519 	 */
2520 	__le32 mac_aggr_delim;
2521 
2522 	/*
2523 	 *   determine whether target is responsible for detecting duplicate
2524 	 *   non-aggregate MPDU and timing out stale fragments.
2525 	 *
2526 	 *   A-MPDU reordering is always performed on the target.
2527 	 *
2528 	 *   0: target responsible for frag timeout and dup checking
2529 	 *   1: host responsible for frag timeout and dup checking
2530 	 */
2531 	__le32 rx_skip_defrag_timeout_dup_detection_check;
2532 
2533 	/*
2534 	 * Configuration for VoW :
2535 	 * No of Video Nodes to be supported
2536 	 * and Max no of descriptors for each Video link (node).
2537 	 */
2538 	__le32 vow_config;
2539 
2540 	/* maximum VDEV that could use GTK offload */
2541 	__le32 gtk_offload_max_vdev;
2542 
2543 	/* Number of msdu descriptors target should use */
2544 	__le32 num_msdu_desc;
2545 
2546 	/*
2547 	 * Max. number of Tx fragments per MSDU
2548 	 *  This parameter controls the max number of Tx fragments per MSDU.
2549 	 *  This is sent by the target as part of the WMI_SERVICE_READY event
2550 	 *  and is overridden by the OS shim as required.
2551 	 */
2552 	__le32 max_frag_entries;
2553 } __packed;
2554 
2555 struct wmi_resource_config_10x {
2556 	/* number of virtual devices (VAPs) to support */
2557 	__le32 num_vdevs;
2558 
2559 	/* number of peer nodes to support */
2560 	__le32 num_peers;
2561 
2562 	/* number of keys per peer */
2563 	__le32 num_peer_keys;
2564 
2565 	/* total number of TX/RX data TIDs */
2566 	__le32 num_tids;
2567 
2568 	/*
2569 	 * max skid for resolving hash collisions
2570 	 *
2571 	 *   The address search table is sparse, so that if two MAC addresses
2572 	 *   result in the same hash value, the second of these conflicting
2573 	 *   entries can slide to the next index in the address search table,
2574 	 *   and use it, if it is unoccupied.  This ast_skid_limit parameter
2575 	 *   specifies the upper bound on how many subsequent indices to search
2576 	 *   over to find an unoccupied space.
2577 	 */
2578 	__le32 ast_skid_limit;
2579 
2580 	/*
2581 	 * the nominal chain mask for transmit
2582 	 *
2583 	 *   The chain mask may be modified dynamically, e.g. to operate AP
2584 	 *   tx with a reduced number of chains if no clients are associated.
2585 	 *   This configuration parameter specifies the nominal chain-mask that
2586 	 *   should be used when not operating with a reduced set of tx chains.
2587 	 */
2588 	__le32 tx_chain_mask;
2589 
2590 	/*
2591 	 * the nominal chain mask for receive
2592 	 *
2593 	 *   The chain mask may be modified dynamically, e.g. for a client
2594 	 *   to use a reduced number of chains for receive if the traffic to
2595 	 *   the client is low enough that it doesn't require downlink MIMO
2596 	 *   or antenna diversity.
2597 	 *   This configuration parameter specifies the nominal chain-mask that
2598 	 *   should be used when not operating with a reduced set of rx chains.
2599 	 */
2600 	__le32 rx_chain_mask;
2601 
2602 	/*
2603 	 * what rx reorder timeout (ms) to use for the AC
2604 	 *
2605 	 *   Each WMM access class (voice, video, best-effort, background) will
2606 	 *   have its own timeout value to dictate how long to wait for missing
2607 	 *   rx MPDUs to arrive before flushing subsequent MPDUs that have
2608 	 *   already been received.
2609 	 *   This parameter specifies the timeout in milliseconds for each
2610 	 *   class.
2611 	 */
2612 	__le32 rx_timeout_pri_vi;
2613 	__le32 rx_timeout_pri_vo;
2614 	__le32 rx_timeout_pri_be;
2615 	__le32 rx_timeout_pri_bk;
2616 
2617 	/*
2618 	 * what mode the rx should decap packets to
2619 	 *
2620 	 *   MAC can decap to RAW (no decap), native wifi or Ethernet types
2621 	 *   THis setting also determines the default TX behavior, however TX
2622 	 *   behavior can be modified on a per VAP basis during VAP init
2623 	 */
2624 	__le32 rx_decap_mode;
2625 
2626 	/* what is the maximum number of scan requests that can be queued */
2627 	__le32 scan_max_pending_reqs;
2628 
2629 	/* maximum VDEV that could use BMISS offload */
2630 	__le32 bmiss_offload_max_vdev;
2631 
2632 	/* maximum VDEV that could use offload roaming */
2633 	__le32 roam_offload_max_vdev;
2634 
2635 	/* maximum AP profiles that would push to offload roaming */
2636 	__le32 roam_offload_max_ap_profiles;
2637 
2638 	/*
2639 	 * how many groups to use for mcast->ucast conversion
2640 	 *
2641 	 *   The target's WAL maintains a table to hold information regarding
2642 	 *   which peers belong to a given multicast group, so that if
2643 	 *   multicast->unicast conversion is enabled, the target can convert
2644 	 *   multicast tx frames to a series of unicast tx frames, to each
2645 	 *   peer within the multicast group.
2646 	     This num_mcast_groups configuration parameter tells the target how
2647 	 *   many multicast groups to provide storage for within its multicast
2648 	 *   group membership table.
2649 	 */
2650 	__le32 num_mcast_groups;
2651 
2652 	/*
2653 	 * size to alloc for the mcast membership table
2654 	 *
2655 	 *   This num_mcast_table_elems configuration parameter tells the
2656 	 *   target how many peer elements it needs to provide storage for in
2657 	 *   its multicast group membership table.
2658 	 *   These multicast group membership table elements are shared by the
2659 	 *   multicast groups stored within the table.
2660 	 */
2661 	__le32 num_mcast_table_elems;
2662 
2663 	/*
2664 	 * whether/how to do multicast->unicast conversion
2665 	 *
2666 	 *   This configuration parameter specifies whether the target should
2667 	 *   perform multicast --> unicast conversion on transmit, and if so,
2668 	 *   what to do if it finds no entries in its multicast group
2669 	 *   membership table for the multicast IP address in the tx frame.
2670 	 *   Configuration value:
2671 	 *   0 -> Do not perform multicast to unicast conversion.
2672 	 *   1 -> Convert multicast frames to unicast, if the IP multicast
2673 	 *        address from the tx frame is found in the multicast group
2674 	 *        membership table.  If the IP multicast address is not found,
2675 	 *        drop the frame.
2676 	 *   2 -> Convert multicast frames to unicast, if the IP multicast
2677 	 *        address from the tx frame is found in the multicast group
2678 	 *        membership table.  If the IP multicast address is not found,
2679 	 *        transmit the frame as multicast.
2680 	 */
2681 	__le32 mcast2ucast_mode;
2682 
2683 	/*
2684 	 * how much memory to allocate for a tx PPDU dbg log
2685 	 *
2686 	 *   This parameter controls how much memory the target will allocate
2687 	 *   to store a log of tx PPDU meta-information (how large the PPDU
2688 	 *   was, when it was sent, whether it was successful, etc.)
2689 	 */
2690 	__le32 tx_dbg_log_size;
2691 
2692 	/* how many AST entries to be allocated for WDS */
2693 	__le32 num_wds_entries;
2694 
2695 	/*
2696 	 * MAC DMA burst size, e.g., For target PCI limit can be
2697 	 * 0 -default, 1 256B
2698 	 */
2699 	__le32 dma_burst_size;
2700 
2701 	/*
2702 	 * Fixed delimiters to be inserted after every MPDU to
2703 	 * account for interface latency to avoid underrun.
2704 	 */
2705 	__le32 mac_aggr_delim;
2706 
2707 	/*
2708 	 *   determine whether target is responsible for detecting duplicate
2709 	 *   non-aggregate MPDU and timing out stale fragments.
2710 	 *
2711 	 *   A-MPDU reordering is always performed on the target.
2712 	 *
2713 	 *   0: target responsible for frag timeout and dup checking
2714 	 *   1: host responsible for frag timeout and dup checking
2715 	 */
2716 	__le32 rx_skip_defrag_timeout_dup_detection_check;
2717 
2718 	/*
2719 	 * Configuration for VoW :
2720 	 * No of Video Nodes to be supported
2721 	 * and Max no of descriptors for each Video link (node).
2722 	 */
2723 	__le32 vow_config;
2724 
2725 	/* Number of msdu descriptors target should use */
2726 	__le32 num_msdu_desc;
2727 
2728 	/*
2729 	 * Max. number of Tx fragments per MSDU
2730 	 *  This parameter controls the max number of Tx fragments per MSDU.
2731 	 *  This is sent by the target as part of the WMI_SERVICE_READY event
2732 	 *  and is overridden by the OS shim as required.
2733 	 */
2734 	__le32 max_frag_entries;
2735 } __packed;
2736 
2737 enum wmi_10_2_feature_mask {
2738 	WMI_10_2_RX_BATCH_MODE = BIT(0),
2739 	WMI_10_2_ATF_CONFIG    = BIT(1),
2740 	WMI_10_2_COEX_GPIO     = BIT(3),
2741 	WMI_10_2_BSS_CHAN_INFO = BIT(6),
2742 	WMI_10_2_PEER_STATS    = BIT(7),
2743 };
2744 
2745 struct wmi_resource_config_10_2 {
2746 	struct wmi_resource_config_10x common;
2747 	__le32 max_peer_ext_stats;
2748 	__le32 smart_ant_cap; /* 0-disable, 1-enable */
2749 	__le32 bk_min_free;
2750 	__le32 be_min_free;
2751 	__le32 vi_min_free;
2752 	__le32 vo_min_free;
2753 	__le32 feature_mask;
2754 } __packed;
2755 
2756 #define NUM_UNITS_IS_NUM_VDEVS         BIT(0)
2757 #define NUM_UNITS_IS_NUM_PEERS         BIT(1)
2758 #define NUM_UNITS_IS_NUM_ACTIVE_PEERS  BIT(2)
2759 
2760 struct wmi_resource_config_10_4 {
2761 	/* Number of virtual devices (VAPs) to support */
2762 	__le32 num_vdevs;
2763 
2764 	/* Number of peer nodes to support */
2765 	__le32 num_peers;
2766 
2767 	/* Number of active peer nodes to support */
2768 	__le32 num_active_peers;
2769 
2770 	/* In offload mode, target supports features like WOW, chatter and other
2771 	 * protocol offloads. In order to support them some functionalities like
2772 	 * reorder buffering, PN checking need to be done in target.
2773 	 * This determines maximum number of peers supported by target in
2774 	 * offload mode.
2775 	 */
2776 	__le32 num_offload_peers;
2777 
2778 	/* Number of reorder buffers available for doing target based reorder
2779 	 * Rx reorder buffering
2780 	 */
2781 	__le32 num_offload_reorder_buffs;
2782 
2783 	/* Number of keys per peer */
2784 	__le32 num_peer_keys;
2785 
2786 	/* Total number of TX/RX data TIDs */
2787 	__le32 num_tids;
2788 
2789 	/* Max skid for resolving hash collisions.
2790 	 * The address search table is sparse, so that if two MAC addresses
2791 	 * result in the same hash value, the second of these conflicting
2792 	 * entries can slide to the next index in the address search table,
2793 	 * and use it, if it is unoccupied.  This ast_skid_limit parameter
2794 	 * specifies the upper bound on how many subsequent indices to search
2795 	 * over to find an unoccupied space.
2796 	 */
2797 	__le32 ast_skid_limit;
2798 
2799 	/* The nominal chain mask for transmit.
2800 	 * The chain mask may be modified dynamically, e.g. to operate AP tx
2801 	 * with a reduced number of chains if no clients are associated.
2802 	 * This configuration parameter specifies the nominal chain-mask that
2803 	 * should be used when not operating with a reduced set of tx chains.
2804 	 */
2805 	__le32 tx_chain_mask;
2806 
2807 	/* The nominal chain mask for receive.
2808 	 * The chain mask may be modified dynamically, e.g. for a client to use
2809 	 * a reduced number of chains for receive if the traffic to the client
2810 	 * is low enough that it doesn't require downlink MIMO or antenna
2811 	 * diversity. This configuration parameter specifies the nominal
2812 	 * chain-mask that should be used when not operating with a reduced
2813 	 * set of rx chains.
2814 	 */
2815 	__le32 rx_chain_mask;
2816 
2817 	/* What rx reorder timeout (ms) to use for the AC.
2818 	 * Each WMM access class (voice, video, best-effort, background) will
2819 	 * have its own timeout value to dictate how long to wait for missing
2820 	 * rx MPDUs to arrive before flushing subsequent MPDUs that have already
2821 	 * been received. This parameter specifies the timeout in milliseconds
2822 	 * for each class.
2823 	 */
2824 	__le32 rx_timeout_pri[4];
2825 
2826 	/* What mode the rx should decap packets to.
2827 	 * MAC can decap to RAW (no decap), native wifi or Ethernet types.
2828 	 * This setting also determines the default TX behavior, however TX
2829 	 * behavior can be modified on a per VAP basis during VAP init
2830 	 */
2831 	__le32 rx_decap_mode;
2832 
2833 	__le32 scan_max_pending_req;
2834 
2835 	__le32 bmiss_offload_max_vdev;
2836 
2837 	__le32 roam_offload_max_vdev;
2838 
2839 	__le32 roam_offload_max_ap_profiles;
2840 
2841 	/* How many groups to use for mcast->ucast conversion.
2842 	 * The target's WAL maintains a table to hold information regarding
2843 	 * which peers belong to a given multicast group, so that if
2844 	 * multicast->unicast conversion is enabled, the target can convert
2845 	 * multicast tx frames to a series of unicast tx frames, to each peer
2846 	 * within the multicast group. This num_mcast_groups configuration
2847 	 * parameter tells the target how many multicast groups to provide
2848 	 * storage for within its multicast group membership table.
2849 	 */
2850 	__le32 num_mcast_groups;
2851 
2852 	/* Size to alloc for the mcast membership table.
2853 	 * This num_mcast_table_elems configuration parameter tells the target
2854 	 * how many peer elements it needs to provide storage for in its
2855 	 * multicast group membership table. These multicast group membership
2856 	 * table elements are shared by the multicast groups stored within
2857 	 * the table.
2858 	 */
2859 	__le32 num_mcast_table_elems;
2860 
2861 	/* Whether/how to do multicast->unicast conversion.
2862 	 * This configuration parameter specifies whether the target should
2863 	 * perform multicast --> unicast conversion on transmit, and if so,
2864 	 * what to do if it finds no entries in its multicast group membership
2865 	 * table for the multicast IP address in the tx frame.
2866 	 * Configuration value:
2867 	 * 0 -> Do not perform multicast to unicast conversion.
2868 	 * 1 -> Convert multicast frames to unicast, if the IP multicast address
2869 	 *      from the tx frame is found in the multicast group membership
2870 	 *      table.  If the IP multicast address is not found, drop the frame
2871 	 * 2 -> Convert multicast frames to unicast, if the IP multicast address
2872 	 *      from the tx frame is found in the multicast group membership
2873 	 *      table.  If the IP multicast address is not found, transmit the
2874 	 *      frame as multicast.
2875 	 */
2876 	__le32 mcast2ucast_mode;
2877 
2878 	/* How much memory to allocate for a tx PPDU dbg log.
2879 	 * This parameter controls how much memory the target will allocate to
2880 	 * store a log of tx PPDU meta-information (how large the PPDU was,
2881 	 * when it was sent, whether it was successful, etc.)
2882 	 */
2883 	__le32 tx_dbg_log_size;
2884 
2885 	/* How many AST entries to be allocated for WDS */
2886 	__le32 num_wds_entries;
2887 
2888 	/* MAC DMA burst size. 0 -default, 1 -256B */
2889 	__le32 dma_burst_size;
2890 
2891 	/* Fixed delimiters to be inserted after every MPDU to account for
2892 	 * interface latency to avoid underrun.
2893 	 */
2894 	__le32 mac_aggr_delim;
2895 
2896 	/* Determine whether target is responsible for detecting duplicate
2897 	 * non-aggregate MPDU and timing out stale fragments. A-MPDU reordering
2898 	 * is always performed on the target.
2899 	 *
2900 	 * 0: target responsible for frag timeout and dup checking
2901 	 * 1: host responsible for frag timeout and dup checking
2902 	 */
2903 	__le32 rx_skip_defrag_timeout_dup_detection_check;
2904 
2905 	/* Configuration for VoW : No of Video nodes to be supported and max
2906 	 * no of descriptors for each video link (node).
2907 	 */
2908 	__le32 vow_config;
2909 
2910 	/* Maximum vdev that could use gtk offload */
2911 	__le32 gtk_offload_max_vdev;
2912 
2913 	/* Number of msdu descriptors target should use */
2914 	__le32 num_msdu_desc;
2915 
2916 	/* Max number of tx fragments per MSDU.
2917 	 * This parameter controls the max number of tx fragments per MSDU.
2918 	 * This will passed by target as part of the WMI_SERVICE_READY event
2919 	 * and is overridden by the OS shim as required.
2920 	 */
2921 	__le32 max_frag_entries;
2922 
2923 	/* Max number of extended peer stats.
2924 	 * This parameter controls the max number of peers for which extended
2925 	 * statistics are supported by target
2926 	 */
2927 	__le32 max_peer_ext_stats;
2928 
2929 	/* Smart antenna capabilities information.
2930 	 * 1 - Smart antenna is enabled
2931 	 * 0 - Smart antenna is disabled
2932 	 * In future this can contain smart antenna specific capabilities.
2933 	 */
2934 	__le32 smart_ant_cap;
2935 
2936 	/* User can configure the buffers allocated for each AC (BE, BK, VI, VO)
2937 	 * during init.
2938 	 */
2939 	__le32 bk_minfree;
2940 	__le32 be_minfree;
2941 	__le32 vi_minfree;
2942 	__le32 vo_minfree;
2943 
2944 	/* Rx batch mode capability.
2945 	 * 1 - Rx batch mode enabled
2946 	 * 0 - Rx batch mode disabled
2947 	 */
2948 	__le32 rx_batchmode;
2949 
2950 	/* Thermal throttling capability.
2951 	 * 1 - Capable of thermal throttling
2952 	 * 0 - Not capable of thermal throttling
2953 	 */
2954 	__le32 tt_support;
2955 
2956 	/* ATF configuration.
2957 	 * 1  - Enable ATF
2958 	 * 0  - Disable ATF
2959 	 */
2960 	__le32 atf_config;
2961 
2962 	/* Configure padding to manage IP header un-alignment
2963 	 * 1  - Enable padding
2964 	 * 0  - Disable padding
2965 	 */
2966 	__le32 iphdr_pad_config;
2967 
2968 	/* qwrap configuration (bits 15-0)
2969 	 * 1  - This is qwrap configuration
2970 	 * 0  - This is not qwrap
2971 	 *
2972 	 * Bits 31-16 is alloc_frag_desc_for_data_pkt (1 enables, 0 disables)
2973 	 * In order to get ack-RSSI reporting and to specify the tx-rate for
2974 	 * individual frames, this option must be enabled.  This uses an extra
2975 	 * 4 bytes per tx-msdu descriptor, so don't enable it unless you need it.
2976 	 */
2977 	__le32 qwrap_config;
2978 } __packed;
2979 
2980 enum wmi_coex_version {
2981 	WMI_NO_COEX_VERSION_SUPPORT	= 0,
2982 	/* 3 wire coex support*/
2983 	WMI_COEX_VERSION_1		= 1,
2984 	/* 2.5 wire coex support*/
2985 	WMI_COEX_VERSION_2		= 2,
2986 	/* 2.5 wire coex with duty cycle support */
2987 	WMI_COEX_VERSION_3		= 3,
2988 	/* 4 wire coex support*/
2989 	WMI_COEX_VERSION_4		= 4,
2990 };
2991 
2992 /**
2993  * enum wmi_10_4_feature_mask - WMI 10.4 feature enable/disable flags
2994  * @WMI_10_4_LTEU_SUPPORT: LTEU config
2995  * @WMI_10_4_COEX_GPIO_SUPPORT: COEX GPIO config
2996  * @WMI_10_4_AUX_RADIO_SPECTRAL_INTF: AUX Radio Enhancement for spectral scan
2997  * @WMI_10_4_AUX_RADIO_CHAN_LOAD_INTF: AUX Radio Enhancement for chan load scan
2998  * @WMI_10_4_BSS_CHANNEL_INFO_64: BSS channel info stats
2999  * @WMI_10_4_PEER_STATS: Per station stats
3000  * @WMI_10_4_VDEV_STATS: Per vdev stats
3001  * @WMI_10_4_TDLS: Implicit TDLS support in firmware enable/disable
3002  * @WMI_10_4_TDLS_OFFCHAN: TDLS offchannel support enable/disable
3003  * @WMI_10_4_TDLS_UAPSD_BUFFER_STA: TDLS buffer sta support enable/disable
3004  * @WMI_10_4_TDLS_UAPSD_SLEEP_STA: TDLS sleep sta support enable/disable
3005  * @WMI_10_4_TDLS_CONN_TRACKER_IN_HOST_MODE: TDLS connection tracker in host
3006  *	enable/disable
3007  * @WMI_10_4_TDLS_EXPLICIT_MODE_ONLY:Explicit TDLS mode enable/disable
3008  * @WMI_10_4_TX_DATA_ACK_RSSI: Enable DATA ACK RSSI if firmware is capable
3009  */
3010 enum wmi_10_4_feature_mask {
3011 	WMI_10_4_LTEU_SUPPORT			= BIT(0),
3012 	WMI_10_4_COEX_GPIO_SUPPORT		= BIT(1),
3013 	WMI_10_4_AUX_RADIO_SPECTRAL_INTF	= BIT(2),
3014 	WMI_10_4_AUX_RADIO_CHAN_LOAD_INTF	= BIT(3),
3015 	WMI_10_4_BSS_CHANNEL_INFO_64		= BIT(4),
3016 	WMI_10_4_PEER_STATS			= BIT(5),
3017 	WMI_10_4_VDEV_STATS			= BIT(6),
3018 	WMI_10_4_TDLS				= BIT(7),
3019 	WMI_10_4_TDLS_OFFCHAN			= BIT(8),
3020 	WMI_10_4_TDLS_UAPSD_BUFFER_STA		= BIT(9),
3021 	WMI_10_4_TDLS_UAPSD_SLEEP_STA		= BIT(10),
3022 	WMI_10_4_TDLS_CONN_TRACKER_IN_HOST_MODE = BIT(11),
3023 	WMI_10_4_TDLS_EXPLICIT_MODE_ONLY	= BIT(12),
3024 	WMI_10_4_TX_DATA_ACK_RSSI               = BIT(16),
3025 	WMI_10_4_EXT_PEER_TID_CONFIGS_SUPPORT	= BIT(17),
3026 	WMI_10_4_REPORT_AIRTIME			= BIT(18),
3027 
3028 };
3029 
3030 struct wmi_ext_resource_config_10_4_cmd {
3031 	/* contains enum wmi_host_platform_type */
3032 	__le32 host_platform_config;
3033 	/* see enum wmi_10_4_feature_mask */
3034 	__le32 fw_feature_bitmap;
3035 	/* WLAN priority GPIO number */
3036 	__le32 wlan_gpio_priority;
3037 	/* see enum wmi_coex_version */
3038 	__le32 coex_version;
3039 	/* COEX GPIO config */
3040 	__le32 coex_gpio_pin1;
3041 	__le32 coex_gpio_pin2;
3042 	__le32 coex_gpio_pin3;
3043 	/* number of vdevs allowed to perform tdls */
3044 	__le32 num_tdls_vdevs;
3045 	/* number of peers to track per TDLS vdev */
3046 	__le32 num_tdls_conn_table_entries;
3047 	/* number of tdls sleep sta supported */
3048 	__le32 max_tdls_concurrent_sleep_sta;
3049 	/* number of tdls buffer sta supported */
3050 	__le32 max_tdls_concurrent_buffer_sta;
3051 };
3052 
3053 /* structure describing host memory chunk. */
3054 struct host_memory_chunk {
3055 	/* id of the request that is passed up in service ready */
3056 	__le32 req_id;
3057 	/* the physical address the memory chunk */
3058 	__le32 ptr;
3059 	/* size of the chunk */
3060 	__le32 size;
3061 } __packed;
3062 
3063 #define WMI_IRAM_RECOVERY_HOST_MEM_REQ_ID 8
3064 
3065 struct wmi_host_mem_chunks {
3066 	__le32 count;
3067 	/* some fw revisions require at least 1 chunk regardless of count */
3068 	struct host_memory_chunk items[1];
3069 } __packed;
3070 
3071 struct wmi_init_cmd {
3072 	struct wmi_resource_config resource_config;
3073 	struct wmi_host_mem_chunks mem_chunks;
3074 } __packed;
3075 
3076 /* _10x structure is from 10.X FW API */
3077 struct wmi_init_cmd_10x {
3078 	struct wmi_resource_config_10x resource_config;
3079 	struct wmi_host_mem_chunks mem_chunks;
3080 } __packed;
3081 
3082 struct wmi_init_cmd_10_2 {
3083 	struct wmi_resource_config_10_2 resource_config;
3084 	struct wmi_host_mem_chunks mem_chunks;
3085 } __packed;
3086 
3087 struct wmi_init_cmd_10_4 {
3088 	struct wmi_resource_config_10_4 resource_config;
3089 	struct wmi_host_mem_chunks mem_chunks;
3090 } __packed;
3091 
3092 struct wmi_chan_list_entry {
3093 	__le16 freq;
3094 	u8 phy_mode; /* valid for 10.2 only */
3095 	u8 reserved;
3096 } __packed;
3097 
3098 /* TLV for channel list */
3099 struct wmi_chan_list {
3100 	__le32 tag; /* WMI_CHAN_LIST_TAG */
3101 	__le32 num_chan;
3102 	struct wmi_chan_list_entry channel_list[];
3103 } __packed;
3104 
3105 struct wmi_bssid_list {
3106 	__le32 tag; /* WMI_BSSID_LIST_TAG */
3107 	__le32 num_bssid;
3108 	struct wmi_mac_addr bssid_list[];
3109 } __packed;
3110 
3111 struct wmi_ie_data {
3112 	__le32 tag; /* WMI_IE_TAG */
3113 	__le32 ie_len;
3114 	u8 ie_data[];
3115 } __packed;
3116 
3117 struct wmi_ssid {
3118 	__le32 ssid_len;
3119 	u8 ssid[32];
3120 } __packed;
3121 
3122 struct wmi_ssid_list {
3123 	__le32 tag; /* WMI_SSID_LIST_TAG */
3124 	__le32 num_ssids;
3125 	struct wmi_ssid ssids[];
3126 } __packed;
3127 
3128 /* prefix used by scan requestor ids on the host */
3129 #define WMI_HOST_SCAN_REQUESTOR_ID_PREFIX 0xA000
3130 
3131 /* prefix used by scan request ids generated on the host */
3132 /* host cycles through the lower 12 bits to generate ids */
3133 #define WMI_HOST_SCAN_REQ_ID_PREFIX 0xA000
3134 
3135 #define WLAN_SCAN_PARAMS_MAX_SSID    16
3136 #define WLAN_SCAN_PARAMS_MAX_BSSID   4
3137 #define WLAN_SCAN_PARAMS_MAX_IE_LEN  256
3138 
3139 /* Values lower than this may be refused by some firmware revisions with a scan
3140  * completion with a timedout reason.
3141  */
3142 #define WMI_SCAN_CHAN_MIN_TIME_MSEC 40
3143 
3144 /* Scan priority numbers must be sequential, starting with 0 */
3145 enum wmi_scan_priority {
3146 	WMI_SCAN_PRIORITY_VERY_LOW = 0,
3147 	WMI_SCAN_PRIORITY_LOW,
3148 	WMI_SCAN_PRIORITY_MEDIUM,
3149 	WMI_SCAN_PRIORITY_HIGH,
3150 	WMI_SCAN_PRIORITY_VERY_HIGH,
3151 	WMI_SCAN_PRIORITY_COUNT   /* number of priorities supported */
3152 };
3153 
3154 struct wmi_start_scan_common {
3155 	/* Scan ID */
3156 	__le32 scan_id;
3157 	/* Scan requestor ID */
3158 	__le32 scan_req_id;
3159 	/* VDEV id(interface) that is requesting scan */
3160 	__le32 vdev_id;
3161 	/* Scan Priority, input to scan scheduler */
3162 	__le32 scan_priority;
3163 	/* Scan events subscription */
3164 	__le32 notify_scan_events;
3165 	/* dwell time in msec on active channels */
3166 	__le32 dwell_time_active;
3167 	/* dwell time in msec on passive channels */
3168 	__le32 dwell_time_passive;
3169 	/*
3170 	 * min time in msec on the BSS channel,only valid if atleast one
3171 	 * VDEV is active
3172 	 */
3173 	__le32 min_rest_time;
3174 	/*
3175 	 * max rest time in msec on the BSS channel,only valid if at least
3176 	 * one VDEV is active
3177 	 */
3178 	/*
3179 	 * the scanner will rest on the bss channel at least min_rest_time
3180 	 * after min_rest_time the scanner will start checking for tx/rx
3181 	 * activity on all VDEVs. if there is no activity the scanner will
3182 	 * switch to off channel. if there is activity the scanner will let
3183 	 * the radio on the bss channel until max_rest_time expires.at
3184 	 * max_rest_time scanner will switch to off channel irrespective of
3185 	 * activity. activity is determined by the idle_time parameter.
3186 	 */
3187 	__le32 max_rest_time;
3188 	/*
3189 	 * time before sending next set of probe requests.
3190 	 * The scanner keeps repeating probe requests transmission with
3191 	 * period specified by repeat_probe_time.
3192 	 * The number of probe requests specified depends on the ssid_list
3193 	 * and bssid_list
3194 	 */
3195 	__le32 repeat_probe_time;
3196 	/* time in msec between 2 consequetive probe requests with in a set. */
3197 	__le32 probe_spacing_time;
3198 	/*
3199 	 * data inactivity time in msec on bss channel that will be used by
3200 	 * scanner for measuring the inactivity.
3201 	 */
3202 	__le32 idle_time;
3203 	/* maximum time in msec allowed for scan  */
3204 	__le32 max_scan_time;
3205 	/*
3206 	 * delay in msec before sending first probe request after switching
3207 	 * to a channel
3208 	 */
3209 	__le32 probe_delay;
3210 	/* Scan control flags */
3211 	__le32 scan_ctrl_flags;
3212 } __packed;
3213 
3214 struct wmi_start_scan_tlvs {
3215 	/* TLV parameters. These includes channel list, ssid list, bssid list,
3216 	 * extra ies.
3217 	 */
3218 	u8 tlvs[0];
3219 } __packed;
3220 
3221 struct wmi_start_scan_cmd {
3222 	struct wmi_start_scan_common common;
3223 	__le32 burst_duration_ms;
3224 	struct wmi_start_scan_tlvs tlvs;
3225 } __packed;
3226 
3227 /* This is the definition from 10.X firmware branch */
3228 struct wmi_10x_start_scan_cmd {
3229 	struct wmi_start_scan_common common;
3230 	struct wmi_start_scan_tlvs tlvs;
3231 } __packed;
3232 
3233 struct wmi_ssid_arg {
3234 	int len;
3235 	const u8 *ssid;
3236 };
3237 
3238 struct wmi_bssid_arg {
3239 	const u8 *bssid;
3240 };
3241 
3242 struct wmi_start_scan_arg {
3243 	u32 scan_id;
3244 	u32 scan_req_id;
3245 	u32 vdev_id;
3246 	u32 scan_priority;
3247 	u32 notify_scan_events;
3248 	u32 dwell_time_active;
3249 	u32 dwell_time_passive;
3250 	u32 min_rest_time;
3251 	u32 max_rest_time;
3252 	u32 repeat_probe_time;
3253 	u32 probe_spacing_time;
3254 	u32 idle_time;
3255 	u32 max_scan_time;
3256 	u32 probe_delay;
3257 	u32 scan_ctrl_flags;
3258 	u32 burst_duration_ms;
3259 
3260 	u32 ie_len;
3261 	u32 n_channels;
3262 	u32 n_ssids;
3263 	u32 n_bssids;
3264 
3265 	u8 ie[WLAN_SCAN_PARAMS_MAX_IE_LEN];
3266 	u16 channels[64];
3267 	struct wmi_ssid_arg ssids[WLAN_SCAN_PARAMS_MAX_SSID];
3268 	struct wmi_bssid_arg bssids[WLAN_SCAN_PARAMS_MAX_BSSID];
3269 	struct wmi_mac_addr mac_addr;
3270 	struct wmi_mac_addr mac_mask;
3271 };
3272 
3273 /* scan control flags */
3274 
3275 /* passively scan all channels including active channels */
3276 #define WMI_SCAN_FLAG_PASSIVE        0x1
3277 /* add wild card ssid probe request even though ssid_list is specified. */
3278 #define WMI_SCAN_ADD_BCAST_PROBE_REQ 0x2
3279 /* add cck rates to rates/xrate ie for the generated probe request */
3280 #define WMI_SCAN_ADD_CCK_RATES 0x4
3281 /* add ofdm rates to rates/xrate ie for the generated probe request */
3282 #define WMI_SCAN_ADD_OFDM_RATES 0x8
3283 /* To enable indication of Chan load and Noise floor to host */
3284 #define WMI_SCAN_CHAN_STAT_EVENT 0x10
3285 /* Filter Probe request frames  */
3286 #define WMI_SCAN_FILTER_PROBE_REQ 0x20
3287 /* When set, DFS channels will not be scanned */
3288 #define WMI_SCAN_BYPASS_DFS_CHN 0x40
3289 /* Different FW scan engine may choose to bail out on errors.
3290  * Allow the driver to have influence over that.
3291  */
3292 #define WMI_SCAN_CONTINUE_ON_ERROR 0x80
3293 
3294 /* Use random MAC address for TA for Probe Request frame and add
3295  * OUI specified by WMI_SCAN_PROB_REQ_OUI_CMDID to the Probe Request frame.
3296  * if OUI is not set by WMI_SCAN_PROB_REQ_OUI_CMDID then the flag is ignored.
3297  */
3298 #define WMI_SCAN_ADD_SPOOFED_MAC_IN_PROBE_REQ   0x1000
3299 
3300 /* WMI_SCAN_CLASS_MASK must be the same value as IEEE80211_SCAN_CLASS_MASK */
3301 #define WMI_SCAN_CLASS_MASK 0xFF000000
3302 
3303 enum wmi_stop_scan_type {
3304 	WMI_SCAN_STOP_ONE	= 0x00000000, /* stop by scan_id */
3305 	WMI_SCAN_STOP_VDEV_ALL	= 0x01000000, /* stop by vdev_id */
3306 	WMI_SCAN_STOP_ALL	= 0x04000000, /* stop all scans */
3307 };
3308 
3309 struct wmi_stop_scan_cmd {
3310 	__le32 scan_req_id;
3311 	__le32 scan_id;
3312 	__le32 req_type;
3313 	__le32 vdev_id;
3314 } __packed;
3315 
3316 struct wmi_stop_scan_arg {
3317 	u32 req_id;
3318 	enum wmi_stop_scan_type req_type;
3319 	union {
3320 		u32 scan_id;
3321 		u32 vdev_id;
3322 	} u;
3323 };
3324 
3325 struct wmi_scan_chan_list_cmd {
3326 	__le32 num_scan_chans;
3327 	struct wmi_channel chan_info[];
3328 } __packed;
3329 
3330 struct wmi_scan_chan_list_arg {
3331 	u32 n_channels;
3332 	struct wmi_channel_arg *channels;
3333 };
3334 
3335 enum wmi_bss_filter {
3336 	WMI_BSS_FILTER_NONE = 0,        /* no beacons forwarded */
3337 	WMI_BSS_FILTER_ALL,             /* all beacons forwarded */
3338 	WMI_BSS_FILTER_PROFILE,         /* only beacons matching profile */
3339 	WMI_BSS_FILTER_ALL_BUT_PROFILE, /* all but beacons matching profile */
3340 	WMI_BSS_FILTER_CURRENT_BSS,     /* only beacons matching current BSS */
3341 	WMI_BSS_FILTER_ALL_BUT_BSS,     /* all but beacons matching BSS */
3342 	WMI_BSS_FILTER_PROBED_SSID,     /* beacons matching probed ssid */
3343 	WMI_BSS_FILTER_LAST_BSS,        /* marker only */
3344 };
3345 
3346 enum wmi_scan_event_type {
3347 	WMI_SCAN_EVENT_STARTED              = BIT(0),
3348 	WMI_SCAN_EVENT_COMPLETED            = BIT(1),
3349 	WMI_SCAN_EVENT_BSS_CHANNEL          = BIT(2),
3350 	WMI_SCAN_EVENT_FOREIGN_CHANNEL      = BIT(3),
3351 	WMI_SCAN_EVENT_DEQUEUED             = BIT(4),
3352 	/* possibly by high-prio scan */
3353 	WMI_SCAN_EVENT_PREEMPTED            = BIT(5),
3354 	WMI_SCAN_EVENT_START_FAILED         = BIT(6),
3355 	WMI_SCAN_EVENT_RESTARTED            = BIT(7),
3356 	WMI_SCAN_EVENT_FOREIGN_CHANNEL_EXIT = BIT(8),
3357 	WMI_SCAN_EVENT_MAX                  = BIT(15),
3358 };
3359 
3360 enum wmi_scan_completion_reason {
3361 	WMI_SCAN_REASON_COMPLETED,
3362 	WMI_SCAN_REASON_CANCELLED,
3363 	WMI_SCAN_REASON_PREEMPTED,
3364 	WMI_SCAN_REASON_TIMEDOUT,
3365 	WMI_SCAN_REASON_INTERNAL_FAILURE,
3366 	WMI_SCAN_REASON_MAX,
3367 };
3368 
3369 struct wmi_scan_event {
3370 	__le32 event_type; /* %WMI_SCAN_EVENT_ */
3371 	__le32 reason; /* %WMI_SCAN_REASON_ */
3372 	__le32 channel_freq; /* only valid for WMI_SCAN_EVENT_FOREIGN_CHANNEL */
3373 	__le32 scan_req_id;
3374 	__le32 scan_id;
3375 	__le32 vdev_id;
3376 } __packed;
3377 
3378 /*
3379  * This defines how much headroom is kept in the
3380  * receive frame between the descriptor and the
3381  * payload, in order for the WMI PHY error and
3382  * management handler to insert header contents.
3383  *
3384  * This is in bytes.
3385  */
3386 #define WMI_MGMT_RX_HDR_HEADROOM    52
3387 
3388 /*
3389  * This event will be used for sending scan results
3390  * as well as rx mgmt frames to the host. The rx buffer
3391  * will be sent as part of this WMI event. It would be a
3392  * good idea to pass all the fields in the RX status
3393  * descriptor up to the host.
3394  */
3395 struct wmi_mgmt_rx_hdr_v1 {
3396 	__le32 channel;
3397 	__le32 snr;
3398 	__le32 rate;
3399 	__le32 phy_mode;
3400 	__le32 buf_len;
3401 	__le32 status; /* %WMI_RX_STATUS_ */
3402 } __packed;
3403 
3404 struct wmi_mgmt_rx_hdr_v2 {
3405 	struct wmi_mgmt_rx_hdr_v1 v1;
3406 	__le32 rssi_ctl[4];
3407 } __packed;
3408 
3409 struct wmi_mgmt_rx_event_v1 {
3410 	struct wmi_mgmt_rx_hdr_v1 hdr;
3411 	u8 buf[];
3412 } __packed;
3413 
3414 struct wmi_mgmt_rx_event_v2 {
3415 	struct wmi_mgmt_rx_hdr_v2 hdr;
3416 	u8 buf[];
3417 } __packed;
3418 
3419 struct wmi_10_4_mgmt_rx_hdr {
3420 	__le32 channel;
3421 	__le32 snr;
3422 	    u8 rssi_ctl[4];
3423 	__le32 rate;
3424 	__le32 phy_mode;
3425 	__le32 buf_len;
3426 	__le32 status;
3427 } __packed;
3428 
3429 struct wmi_10_4_mgmt_rx_event {
3430 	struct wmi_10_4_mgmt_rx_hdr hdr;
3431 	u8 buf[];
3432 } __packed;
3433 
3434 struct wmi_mgmt_rx_ext_info {
3435 	__le64 rx_mac_timestamp;
3436 } __packed __aligned(4);
3437 
3438 #define WMI_RX_STATUS_OK			0x00
3439 #define WMI_RX_STATUS_ERR_CRC			0x01
3440 #define WMI_RX_STATUS_ERR_DECRYPT		0x08
3441 #define WMI_RX_STATUS_ERR_MIC			0x10
3442 #define WMI_RX_STATUS_ERR_KEY_CACHE_MISS	0x20
3443 /* Extension data at the end of mgmt frame */
3444 #define WMI_RX_STATUS_EXT_INFO		0x40
3445 
3446 #define PHY_ERROR_GEN_SPECTRAL_SCAN		0x26
3447 #define PHY_ERROR_GEN_FALSE_RADAR_EXT		0x24
3448 #define PHY_ERROR_GEN_RADAR			0x05
3449 
3450 #define PHY_ERROR_10_4_RADAR_MASK               0x4
3451 #define PHY_ERROR_10_4_SPECTRAL_SCAN_MASK       0x4000000
3452 
3453 enum phy_err_type {
3454 	PHY_ERROR_UNKNOWN,
3455 	PHY_ERROR_SPECTRAL_SCAN,
3456 	PHY_ERROR_FALSE_RADAR_EXT,
3457 	PHY_ERROR_RADAR
3458 };
3459 
3460 struct wmi_phyerr {
3461 	__le32 tsf_timestamp;
3462 	__le16 freq1;
3463 	__le16 freq2;
3464 	u8 rssi_combined;
3465 	u8 chan_width_mhz;
3466 	u8 phy_err_code;
3467 	u8 rsvd0;
3468 	__le32 rssi_chains[4];
3469 	__le16 nf_chains[4];
3470 	__le32 buf_len;
3471 	u8 buf[];
3472 } __packed;
3473 
3474 struct wmi_phyerr_event {
3475 	__le32 num_phyerrs;
3476 	__le32 tsf_l32;
3477 	__le32 tsf_u32;
3478 	struct wmi_phyerr phyerrs[];
3479 } __packed;
3480 
3481 struct wmi_10_4_phyerr_event {
3482 	__le32 tsf_l32;
3483 	__le32 tsf_u32;
3484 	__le16 freq1;
3485 	__le16 freq2;
3486 	u8 rssi_combined;
3487 	u8 chan_width_mhz;
3488 	u8 phy_err_code;
3489 	u8 rsvd0;
3490 	__le32 rssi_chains[4];
3491 	__le16 nf_chains[4];
3492 	__le32 phy_err_mask[2];
3493 	__le32 tsf_timestamp;
3494 	__le32 buf_len;
3495 	u8 buf[];
3496 } __packed;
3497 
3498 struct wmi_radar_found_info {
3499 	__le32 pri_min;
3500 	__le32 pri_max;
3501 	__le32 width_min;
3502 	__le32 width_max;
3503 	__le32 sidx_min;
3504 	__le32 sidx_max;
3505 } __packed;
3506 
3507 enum wmi_radar_confirmation_status {
3508 	/* Detected radar was due to SW pulses */
3509 	WMI_SW_RADAR_DETECTED    = 0,
3510 
3511 	WMI_RADAR_DETECTION_FAIL = 1,
3512 
3513 	/* Real radar detected */
3514 	WMI_HW_RADAR_DETECTED    = 2,
3515 };
3516 
3517 #define PHYERR_TLV_SIG				0xBB
3518 #define PHYERR_TLV_TAG_SEARCH_FFT_REPORT	0xFB
3519 #define PHYERR_TLV_TAG_RADAR_PULSE_SUMMARY	0xF8
3520 #define PHYERR_TLV_TAG_SPECTRAL_SUMMARY_REPORT	0xF9
3521 
3522 struct phyerr_radar_report {
3523 	__le32 reg0; /* RADAR_REPORT_REG0_* */
3524 	__le32 reg1; /* RADAR_REPORT_REG1_* */
3525 } __packed;
3526 
3527 #define RADAR_REPORT_REG0_PULSE_IS_CHIRP_MASK		0x80000000
3528 #define RADAR_REPORT_REG0_PULSE_IS_CHIRP_LSB		31
3529 
3530 #define RADAR_REPORT_REG0_PULSE_IS_MAX_WIDTH_MASK	0x40000000
3531 #define RADAR_REPORT_REG0_PULSE_IS_MAX_WIDTH_LSB	30
3532 
3533 #define RADAR_REPORT_REG0_AGC_TOTAL_GAIN_MASK		0x3FF00000
3534 #define RADAR_REPORT_REG0_AGC_TOTAL_GAIN_LSB		20
3535 
3536 #define RADAR_REPORT_REG0_PULSE_DELTA_DIFF_MASK		0x000F0000
3537 #define RADAR_REPORT_REG0_PULSE_DELTA_DIFF_LSB		16
3538 
3539 #define RADAR_REPORT_REG0_PULSE_DELTA_PEAK_MASK		0x0000FC00
3540 #define RADAR_REPORT_REG0_PULSE_DELTA_PEAK_LSB		10
3541 
3542 #define RADAR_REPORT_REG0_PULSE_SIDX_MASK		0x000003FF
3543 #define RADAR_REPORT_REG0_PULSE_SIDX_LSB		0
3544 
3545 #define RADAR_REPORT_REG1_PULSE_SRCH_FFT_VALID_MASK	0x80000000
3546 #define RADAR_REPORT_REG1_PULSE_SRCH_FFT_VALID_LSB	31
3547 
3548 #define RADAR_REPORT_REG1_PULSE_AGC_MB_GAIN_MASK	0x7F000000
3549 #define RADAR_REPORT_REG1_PULSE_AGC_MB_GAIN_LSB		24
3550 
3551 #define RADAR_REPORT_REG1_PULSE_SUBCHAN_MASK_MASK	0x00FF0000
3552 #define RADAR_REPORT_REG1_PULSE_SUBCHAN_MASK_LSB	16
3553 
3554 #define RADAR_REPORT_REG1_PULSE_TSF_OFFSET_MASK		0x0000FF00
3555 #define RADAR_REPORT_REG1_PULSE_TSF_OFFSET_LSB		8
3556 
3557 #define RADAR_REPORT_REG1_PULSE_DUR_MASK		0x000000FF
3558 #define RADAR_REPORT_REG1_PULSE_DUR_LSB			0
3559 
3560 struct phyerr_fft_report {
3561 	__le32 reg0; /* SEARCH_FFT_REPORT_REG0_ * */
3562 	__le32 reg1; /* SEARCH_FFT_REPORT_REG1_ * */
3563 } __packed;
3564 
3565 #define SEARCH_FFT_REPORT_REG0_TOTAL_GAIN_DB_MASK	0xFF800000
3566 #define SEARCH_FFT_REPORT_REG0_TOTAL_GAIN_DB_LSB	23
3567 
3568 #define SEARCH_FFT_REPORT_REG0_BASE_PWR_DB_MASK		0x007FC000
3569 #define SEARCH_FFT_REPORT_REG0_BASE_PWR_DB_LSB		14
3570 
3571 #define SEARCH_FFT_REPORT_REG0_FFT_CHN_IDX_MASK		0x00003000
3572 #define SEARCH_FFT_REPORT_REG0_FFT_CHN_IDX_LSB		12
3573 
3574 #define SEARCH_FFT_REPORT_REG0_PEAK_SIDX_MASK		0x00000FFF
3575 #define SEARCH_FFT_REPORT_REG0_PEAK_SIDX_LSB		0
3576 
3577 #define SEARCH_FFT_REPORT_REG1_RELPWR_DB_MASK		0xFC000000
3578 #define SEARCH_FFT_REPORT_REG1_RELPWR_DB_LSB		26
3579 
3580 #define SEARCH_FFT_REPORT_REG1_AVGPWR_DB_MASK		0x03FC0000
3581 #define SEARCH_FFT_REPORT_REG1_AVGPWR_DB_LSB		18
3582 
3583 #define SEARCH_FFT_REPORT_REG1_PEAK_MAG_MASK		0x0003FF00
3584 #define SEARCH_FFT_REPORT_REG1_PEAK_MAG_LSB		8
3585 
3586 #define SEARCH_FFT_REPORT_REG1_NUM_STR_BINS_IB_MASK	0x000000FF
3587 #define SEARCH_FFT_REPORT_REG1_NUM_STR_BINS_IB_LSB	0
3588 
3589 struct phyerr_tlv {
3590 	__le16 len;
3591 	u8 tag;
3592 	u8 sig;
3593 } __packed;
3594 
3595 #define DFS_RSSI_POSSIBLY_FALSE			50
3596 #define DFS_PEAK_MAG_THOLD_POSSIBLY_FALSE	40
3597 
3598 struct wmi_mgmt_tx_hdr {
3599 	__le32 vdev_id;
3600 	struct wmi_mac_addr peer_macaddr;
3601 	__le32 tx_rate;
3602 	__le32 tx_power;
3603 	__le32 buf_len;
3604 } __packed;
3605 
3606 struct wmi_mgmt_tx_cmd {
3607 	struct wmi_mgmt_tx_hdr hdr;
3608 	u8 buf[];
3609 } __packed;
3610 
3611 struct wmi_echo_event {
3612 	__le32 value;
3613 } __packed;
3614 
3615 struct wmi_echo_cmd {
3616 	__le32 value;
3617 } __packed;
3618 
3619 struct wmi_pdev_set_regdomain_cmd {
3620 	__le32 reg_domain;
3621 	__le32 reg_domain_2G;
3622 	__le32 reg_domain_5G;
3623 	__le32 conformance_test_limit_2G;
3624 	__le32 conformance_test_limit_5G;
3625 } __packed;
3626 
3627 enum wmi_dfs_region {
3628 	/* Uninitialized dfs domain */
3629 	WMI_UNINIT_DFS_DOMAIN = 0,
3630 
3631 	/* FCC3 dfs domain */
3632 	WMI_FCC_DFS_DOMAIN = 1,
3633 
3634 	/* ETSI dfs domain */
3635 	WMI_ETSI_DFS_DOMAIN = 2,
3636 
3637 	/*Japan dfs domain */
3638 	WMI_MKK4_DFS_DOMAIN = 3,
3639 };
3640 
3641 struct wmi_pdev_set_regdomain_cmd_10x {
3642 	__le32 reg_domain;
3643 	__le32 reg_domain_2G;
3644 	__le32 reg_domain_5G;
3645 	__le32 conformance_test_limit_2G;
3646 	__le32 conformance_test_limit_5G;
3647 
3648 	/* dfs domain from wmi_dfs_region */
3649 	__le32 dfs_domain;
3650 } __packed;
3651 
3652 /* Command to set/unset chip in quiet mode */
3653 struct wmi_pdev_set_quiet_cmd {
3654 	/* period in TUs */
3655 	__le32 period;
3656 
3657 	/* duration in TUs */
3658 	__le32 duration;
3659 
3660 	/* offset in TUs */
3661 	__le32 next_start;
3662 
3663 	/* enable/disable */
3664 	__le32 enabled;
3665 } __packed;
3666 
3667 /*
3668  * 802.11g protection mode.
3669  */
3670 enum ath10k_protmode {
3671 	ATH10K_PROT_NONE     = 0,    /* no protection */
3672 	ATH10K_PROT_CTSONLY  = 1,    /* CTS to self */
3673 	ATH10K_PROT_RTSCTS   = 2,    /* RTS-CTS */
3674 };
3675 
3676 enum wmi_rtscts_profile {
3677 	WMI_RTSCTS_FOR_NO_RATESERIES = 0,
3678 	WMI_RTSCTS_FOR_SECOND_RATESERIES,
3679 	WMI_RTSCTS_ACROSS_SW_RETRIES
3680 };
3681 
3682 #define WMI_RTSCTS_ENABLED		1
3683 #define WMI_RTSCTS_SET_MASK		0x0f
3684 #define WMI_RTSCTS_SET_LSB		0
3685 
3686 #define WMI_RTSCTS_PROFILE_MASK		0xf0
3687 #define WMI_RTSCTS_PROFILE_LSB		4
3688 
3689 enum wmi_beacon_gen_mode {
3690 	WMI_BEACON_STAGGERED_MODE = 0,
3691 	WMI_BEACON_BURST_MODE = 1
3692 };
3693 
3694 enum wmi_csa_event_ies_present_flag {
3695 	WMI_CSA_IE_PRESENT = 0x00000001,
3696 	WMI_XCSA_IE_PRESENT = 0x00000002,
3697 	WMI_WBW_IE_PRESENT = 0x00000004,
3698 	WMI_CSWARP_IE_PRESENT = 0x00000008,
3699 };
3700 
3701 /* wmi CSA receive event from beacon frame */
3702 struct wmi_csa_event {
3703 	__le32 i_fc_dur;
3704 	/* Bit 0-15: FC */
3705 	/* Bit 16-31: DUR */
3706 	struct wmi_mac_addr i_addr1;
3707 	struct wmi_mac_addr i_addr2;
3708 	__le32 csa_ie[2];
3709 	__le32 xcsa_ie[2];
3710 	__le32 wb_ie[2];
3711 	__le32 cswarp_ie;
3712 	__le32 ies_present_flag; /* wmi_csa_event_ies_present_flag */
3713 } __packed;
3714 
3715 /* the definition of different PDEV parameters */
3716 #define PDEV_DEFAULT_STATS_UPDATE_PERIOD    500
3717 #define VDEV_DEFAULT_STATS_UPDATE_PERIOD    500
3718 #define PEER_DEFAULT_STATS_UPDATE_PERIOD    500
3719 
3720 struct wmi_pdev_param_map {
3721 	u32 tx_chain_mask;
3722 	u32 rx_chain_mask;
3723 	u32 txpower_limit2g;
3724 	u32 txpower_limit5g;
3725 	u32 txpower_scale;
3726 	u32 beacon_gen_mode;
3727 	u32 beacon_tx_mode;
3728 	u32 resmgr_offchan_mode;
3729 	u32 protection_mode;
3730 	u32 dynamic_bw;
3731 	u32 non_agg_sw_retry_th;
3732 	u32 agg_sw_retry_th;
3733 	u32 sta_kickout_th;
3734 	u32 ac_aggrsize_scaling;
3735 	u32 ltr_enable;
3736 	u32 ltr_ac_latency_be;
3737 	u32 ltr_ac_latency_bk;
3738 	u32 ltr_ac_latency_vi;
3739 	u32 ltr_ac_latency_vo;
3740 	u32 ltr_ac_latency_timeout;
3741 	u32 ltr_sleep_override;
3742 	u32 ltr_rx_override;
3743 	u32 ltr_tx_activity_timeout;
3744 	u32 l1ss_enable;
3745 	u32 dsleep_enable;
3746 	u32 pcielp_txbuf_flush;
3747 	u32 pcielp_txbuf_watermark;
3748 	u32 pcielp_txbuf_tmo_en;
3749 	u32 pcielp_txbuf_tmo_value;
3750 	u32 pdev_stats_update_period;
3751 	u32 vdev_stats_update_period;
3752 	u32 peer_stats_update_period;
3753 	u32 bcnflt_stats_update_period;
3754 	u32 pmf_qos;
3755 	u32 arp_ac_override;
3756 	u32 dcs;
3757 	u32 ani_enable;
3758 	u32 ani_poll_period;
3759 	u32 ani_listen_period;
3760 	u32 ani_ofdm_level;
3761 	u32 ani_cck_level;
3762 	u32 dyntxchain;
3763 	u32 proxy_sta;
3764 	u32 idle_ps_config;
3765 	u32 power_gating_sleep;
3766 	u32 fast_channel_reset;
3767 	u32 burst_dur;
3768 	u32 burst_enable;
3769 	u32 cal_period;
3770 	u32 aggr_burst;
3771 	u32 rx_decap_mode;
3772 	u32 smart_antenna_default_antenna;
3773 	u32 igmpmld_override;
3774 	u32 igmpmld_tid;
3775 	u32 antenna_gain;
3776 	u32 rx_filter;
3777 	u32 set_mcast_to_ucast_tid;
3778 	u32 proxy_sta_mode;
3779 	u32 set_mcast2ucast_mode;
3780 	u32 set_mcast2ucast_buffer;
3781 	u32 remove_mcast2ucast_buffer;
3782 	u32 peer_sta_ps_statechg_enable;
3783 	u32 igmpmld_ac_override;
3784 	u32 block_interbss;
3785 	u32 set_disable_reset_cmdid;
3786 	u32 set_msdu_ttl_cmdid;
3787 	u32 set_ppdu_duration_cmdid;
3788 	u32 txbf_sound_period_cmdid;
3789 	u32 set_promisc_mode_cmdid;
3790 	u32 set_burst_mode_cmdid;
3791 	u32 en_stats;
3792 	u32 mu_group_policy;
3793 	u32 noise_detection;
3794 	u32 noise_threshold;
3795 	u32 dpd_enable;
3796 	u32 set_mcast_bcast_echo;
3797 	u32 atf_strict_sch;
3798 	u32 atf_sched_duration;
3799 	u32 ant_plzn;
3800 	u32 mgmt_retry_limit;
3801 	u32 sensitivity_level;
3802 	u32 signed_txpower_2g;
3803 	u32 signed_txpower_5g;
3804 	u32 enable_per_tid_amsdu;
3805 	u32 enable_per_tid_ampdu;
3806 	u32 cca_threshold;
3807 	u32 rts_fixed_rate;
3808 	u32 pdev_reset;
3809 	u32 wapi_mbssid_offset;
3810 	u32 arp_srcaddr;
3811 	u32 arp_dstaddr;
3812 	u32 enable_btcoex;
3813 	u32 rfkill_config;
3814 	u32 rfkill_enable;
3815 	u32 peer_stats_info_enable;
3816 };
3817 
3818 #define WMI_PDEV_PARAM_UNSUPPORTED 0
3819 
3820 enum wmi_pdev_param {
3821 	/* TX chain mask */
3822 	WMI_PDEV_PARAM_TX_CHAIN_MASK = 0x1,
3823 	/* RX chain mask */
3824 	WMI_PDEV_PARAM_RX_CHAIN_MASK,
3825 	/* TX power limit for 2G Radio */
3826 	WMI_PDEV_PARAM_TXPOWER_LIMIT2G,
3827 	/* TX power limit for 5G Radio */
3828 	WMI_PDEV_PARAM_TXPOWER_LIMIT5G,
3829 	/* TX power scale */
3830 	WMI_PDEV_PARAM_TXPOWER_SCALE,
3831 	/* Beacon generation mode . 0: host, 1: target   */
3832 	WMI_PDEV_PARAM_BEACON_GEN_MODE,
3833 	/* Beacon generation mode . 0: staggered 1: bursted   */
3834 	WMI_PDEV_PARAM_BEACON_TX_MODE,
3835 	/*
3836 	 * Resource manager off chan mode .
3837 	 * 0: turn off offchan mode. 1: turn on offchan mode
3838 	 */
3839 	WMI_PDEV_PARAM_RESMGR_OFFCHAN_MODE,
3840 	/*
3841 	 * Protection mode:
3842 	 * 0: no protection 1:use CTS-to-self 2: use RTS/CTS
3843 	 */
3844 	WMI_PDEV_PARAM_PROTECTION_MODE,
3845 	/*
3846 	 * Dynamic bandwidth - 0: disable, 1: enable
3847 	 *
3848 	 * When enabled HW rate control tries different bandwidths when
3849 	 * retransmitting frames.
3850 	 */
3851 	WMI_PDEV_PARAM_DYNAMIC_BW,
3852 	/* Non aggregrate/ 11g sw retry threshold.0-disable */
3853 	WMI_PDEV_PARAM_NON_AGG_SW_RETRY_TH,
3854 	/* aggregrate sw retry threshold. 0-disable*/
3855 	WMI_PDEV_PARAM_AGG_SW_RETRY_TH,
3856 	/* Station kickout threshold (non of consecutive failures).0-disable */
3857 	WMI_PDEV_PARAM_STA_KICKOUT_TH,
3858 	/* Aggerate size scaling configuration per AC */
3859 	WMI_PDEV_PARAM_AC_AGGRSIZE_SCALING,
3860 	/* LTR enable */
3861 	WMI_PDEV_PARAM_LTR_ENABLE,
3862 	/* LTR latency for BE, in us */
3863 	WMI_PDEV_PARAM_LTR_AC_LATENCY_BE,
3864 	/* LTR latency for BK, in us */
3865 	WMI_PDEV_PARAM_LTR_AC_LATENCY_BK,
3866 	/* LTR latency for VI, in us */
3867 	WMI_PDEV_PARAM_LTR_AC_LATENCY_VI,
3868 	/* LTR latency for VO, in us  */
3869 	WMI_PDEV_PARAM_LTR_AC_LATENCY_VO,
3870 	/* LTR AC latency timeout, in ms */
3871 	WMI_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT,
3872 	/* LTR platform latency override, in us */
3873 	WMI_PDEV_PARAM_LTR_SLEEP_OVERRIDE,
3874 	/* LTR-RX override, in us */
3875 	WMI_PDEV_PARAM_LTR_RX_OVERRIDE,
3876 	/* Tx activity timeout for LTR, in us */
3877 	WMI_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT,
3878 	/* L1SS state machine enable */
3879 	WMI_PDEV_PARAM_L1SS_ENABLE,
3880 	/* Deep sleep state machine enable */
3881 	WMI_PDEV_PARAM_DSLEEP_ENABLE,
3882 	/* RX buffering flush enable */
3883 	WMI_PDEV_PARAM_PCIELP_TXBUF_FLUSH,
3884 	/* RX buffering matermark */
3885 	WMI_PDEV_PARAM_PCIELP_TXBUF_WATERMARK,
3886 	/* RX buffering timeout enable */
3887 	WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_EN,
3888 	/* RX buffering timeout value */
3889 	WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_VALUE,
3890 	/* pdev level stats update period in ms */
3891 	WMI_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD,
3892 	/* vdev level stats update period in ms */
3893 	WMI_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD,
3894 	/* peer level stats update period in ms */
3895 	WMI_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD,
3896 	/* beacon filter status update period */
3897 	WMI_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD,
3898 	/* QOS Mgmt frame protection MFP/PMF 0: disable, 1: enable */
3899 	WMI_PDEV_PARAM_PMF_QOS,
3900 	/* Access category on which ARP frames are sent */
3901 	WMI_PDEV_PARAM_ARP_AC_OVERRIDE,
3902 	/* DCS configuration */
3903 	WMI_PDEV_PARAM_DCS,
3904 	/* Enable/Disable ANI on target */
3905 	WMI_PDEV_PARAM_ANI_ENABLE,
3906 	/* configure the ANI polling period */
3907 	WMI_PDEV_PARAM_ANI_POLL_PERIOD,
3908 	/* configure the ANI listening period */
3909 	WMI_PDEV_PARAM_ANI_LISTEN_PERIOD,
3910 	/* configure OFDM immunity level */
3911 	WMI_PDEV_PARAM_ANI_OFDM_LEVEL,
3912 	/* configure CCK immunity level */
3913 	WMI_PDEV_PARAM_ANI_CCK_LEVEL,
3914 	/* Enable/Disable CDD for 1x1 STAs in rate control module */
3915 	WMI_PDEV_PARAM_DYNTXCHAIN,
3916 	/* Enable/Disable proxy STA */
3917 	WMI_PDEV_PARAM_PROXY_STA,
3918 	/* Enable/Disable low power state when all VDEVs are inactive/idle. */
3919 	WMI_PDEV_PARAM_IDLE_PS_CONFIG,
3920 	/* Enable/Disable power gating sleep */
3921 	WMI_PDEV_PARAM_POWER_GATING_SLEEP,
3922 };
3923 
3924 enum wmi_10x_pdev_param {
3925 	/* TX chian mask */
3926 	WMI_10X_PDEV_PARAM_TX_CHAIN_MASK = 0x1,
3927 	/* RX chian mask */
3928 	WMI_10X_PDEV_PARAM_RX_CHAIN_MASK,
3929 	/* TX power limit for 2G Radio */
3930 	WMI_10X_PDEV_PARAM_TXPOWER_LIMIT2G,
3931 	/* TX power limit for 5G Radio */
3932 	WMI_10X_PDEV_PARAM_TXPOWER_LIMIT5G,
3933 	/* TX power scale */
3934 	WMI_10X_PDEV_PARAM_TXPOWER_SCALE,
3935 	/* Beacon generation mode . 0: host, 1: target   */
3936 	WMI_10X_PDEV_PARAM_BEACON_GEN_MODE,
3937 	/* Beacon generation mode . 0: staggered 1: bursted   */
3938 	WMI_10X_PDEV_PARAM_BEACON_TX_MODE,
3939 	/*
3940 	 * Resource manager off chan mode .
3941 	 * 0: turn off offchan mode. 1: turn on offchan mode
3942 	 */
3943 	WMI_10X_PDEV_PARAM_RESMGR_OFFCHAN_MODE,
3944 	/*
3945 	 * Protection mode:
3946 	 * 0: no protection 1:use CTS-to-self 2: use RTS/CTS
3947 	 */
3948 	WMI_10X_PDEV_PARAM_PROTECTION_MODE,
3949 	/* Dynamic bandwidth 0: disable 1: enable */
3950 	WMI_10X_PDEV_PARAM_DYNAMIC_BW,
3951 	/* Non aggregrate/ 11g sw retry threshold.0-disable */
3952 	WMI_10X_PDEV_PARAM_NON_AGG_SW_RETRY_TH,
3953 	/* aggregrate sw retry threshold. 0-disable*/
3954 	WMI_10X_PDEV_PARAM_AGG_SW_RETRY_TH,
3955 	/* Station kickout threshold (non of consecutive failures).0-disable */
3956 	WMI_10X_PDEV_PARAM_STA_KICKOUT_TH,
3957 	/* Aggerate size scaling configuration per AC */
3958 	WMI_10X_PDEV_PARAM_AC_AGGRSIZE_SCALING,
3959 	/* LTR enable */
3960 	WMI_10X_PDEV_PARAM_LTR_ENABLE,
3961 	/* LTR latency for BE, in us */
3962 	WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_BE,
3963 	/* LTR latency for BK, in us */
3964 	WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_BK,
3965 	/* LTR latency for VI, in us */
3966 	WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_VI,
3967 	/* LTR latency for VO, in us  */
3968 	WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_VO,
3969 	/* LTR AC latency timeout, in ms */
3970 	WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT,
3971 	/* LTR platform latency override, in us */
3972 	WMI_10X_PDEV_PARAM_LTR_SLEEP_OVERRIDE,
3973 	/* LTR-RX override, in us */
3974 	WMI_10X_PDEV_PARAM_LTR_RX_OVERRIDE,
3975 	/* Tx activity timeout for LTR, in us */
3976 	WMI_10X_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT,
3977 	/* L1SS state machine enable */
3978 	WMI_10X_PDEV_PARAM_L1SS_ENABLE,
3979 	/* Deep sleep state machine enable */
3980 	WMI_10X_PDEV_PARAM_DSLEEP_ENABLE,
3981 	/* pdev level stats update period in ms */
3982 	WMI_10X_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD,
3983 	/* vdev level stats update period in ms */
3984 	WMI_10X_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD,
3985 	/* peer level stats update period in ms */
3986 	WMI_10X_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD,
3987 	/* beacon filter status update period */
3988 	WMI_10X_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD,
3989 	/* QOS Mgmt frame protection MFP/PMF 0: disable, 1: enable */
3990 	WMI_10X_PDEV_PARAM_PMF_QOS,
3991 	/* Access category on which ARP and DHCP frames are sent */
3992 	WMI_10X_PDEV_PARAM_ARPDHCP_AC_OVERRIDE,
3993 	/* DCS configuration */
3994 	WMI_10X_PDEV_PARAM_DCS,
3995 	/* Enable/Disable ANI on target */
3996 	WMI_10X_PDEV_PARAM_ANI_ENABLE,
3997 	/* configure the ANI polling period */
3998 	WMI_10X_PDEV_PARAM_ANI_POLL_PERIOD,
3999 	/* configure the ANI listening period */
4000 	WMI_10X_PDEV_PARAM_ANI_LISTEN_PERIOD,
4001 	/* configure OFDM immunity level */
4002 	WMI_10X_PDEV_PARAM_ANI_OFDM_LEVEL,
4003 	/* configure CCK immunity level */
4004 	WMI_10X_PDEV_PARAM_ANI_CCK_LEVEL,
4005 	/* Enable/Disable CDD for 1x1 STAs in rate control module */
4006 	WMI_10X_PDEV_PARAM_DYNTXCHAIN,
4007 	/* Enable/Disable Fast channel reset*/
4008 	WMI_10X_PDEV_PARAM_FAST_CHANNEL_RESET,
4009 	/* Set Bursting DUR */
4010 	WMI_10X_PDEV_PARAM_BURST_DUR,
4011 	/* Set Bursting Enable*/
4012 	WMI_10X_PDEV_PARAM_BURST_ENABLE,
4013 
4014 	/* following are available as of firmware 10.2 */
4015 	WMI_10X_PDEV_PARAM_SMART_ANTENNA_DEFAULT_ANTENNA,
4016 	WMI_10X_PDEV_PARAM_IGMPMLD_OVERRIDE,
4017 	WMI_10X_PDEV_PARAM_IGMPMLD_TID,
4018 	WMI_10X_PDEV_PARAM_ANTENNA_GAIN,
4019 	WMI_10X_PDEV_PARAM_RX_DECAP_MODE,
4020 	WMI_10X_PDEV_PARAM_RX_FILTER,
4021 	WMI_10X_PDEV_PARAM_SET_MCAST_TO_UCAST_TID,
4022 	WMI_10X_PDEV_PARAM_PROXY_STA_MODE,
4023 	WMI_10X_PDEV_PARAM_SET_MCAST2UCAST_MODE,
4024 	WMI_10X_PDEV_PARAM_SET_MCAST2UCAST_BUFFER,
4025 	WMI_10X_PDEV_PARAM_REMOVE_MCAST2UCAST_BUFFER,
4026 	WMI_10X_PDEV_PARAM_PEER_STA_PS_STATECHG_ENABLE,
4027 	WMI_10X_PDEV_PARAM_RTS_FIXED_RATE,
4028 	WMI_10X_PDEV_PARAM_CAL_PERIOD,
4029 	WMI_10X_PDEV_PARAM_ATF_STRICT_SCH,
4030 	WMI_10X_PDEV_PARAM_ATF_SCHED_DURATION,
4031 	WMI_10X_PDEV_PARAM_SET_PROMISC_MODE_CMDID,
4032 	WMI_10X_PDEV_PARAM_PDEV_RESET
4033 };
4034 
4035 enum wmi_10_4_pdev_param {
4036 	WMI_10_4_PDEV_PARAM_TX_CHAIN_MASK = 0x1,
4037 	WMI_10_4_PDEV_PARAM_RX_CHAIN_MASK,
4038 	WMI_10_4_PDEV_PARAM_TXPOWER_LIMIT2G,
4039 	WMI_10_4_PDEV_PARAM_TXPOWER_LIMIT5G,
4040 	WMI_10_4_PDEV_PARAM_TXPOWER_SCALE,
4041 	WMI_10_4_PDEV_PARAM_BEACON_GEN_MODE,
4042 	WMI_10_4_PDEV_PARAM_BEACON_TX_MODE,
4043 	WMI_10_4_PDEV_PARAM_RESMGR_OFFCHAN_MODE,
4044 	WMI_10_4_PDEV_PARAM_PROTECTION_MODE,
4045 	WMI_10_4_PDEV_PARAM_DYNAMIC_BW,
4046 	WMI_10_4_PDEV_PARAM_NON_AGG_SW_RETRY_TH,
4047 	WMI_10_4_PDEV_PARAM_AGG_SW_RETRY_TH,
4048 	WMI_10_4_PDEV_PARAM_STA_KICKOUT_TH,
4049 	WMI_10_4_PDEV_PARAM_AC_AGGRSIZE_SCALING,
4050 	WMI_10_4_PDEV_PARAM_LTR_ENABLE,
4051 	WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_BE,
4052 	WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_BK,
4053 	WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_VI,
4054 	WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_VO,
4055 	WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT,
4056 	WMI_10_4_PDEV_PARAM_LTR_SLEEP_OVERRIDE,
4057 	WMI_10_4_PDEV_PARAM_LTR_RX_OVERRIDE,
4058 	WMI_10_4_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT,
4059 	WMI_10_4_PDEV_PARAM_L1SS_ENABLE,
4060 	WMI_10_4_PDEV_PARAM_DSLEEP_ENABLE,
4061 	WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_FLUSH,
4062 	WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_WATERMARK,
4063 	WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_TMO_EN,
4064 	WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_TMO_VALUE,
4065 	WMI_10_4_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD,
4066 	WMI_10_4_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD,
4067 	WMI_10_4_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD,
4068 	WMI_10_4_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD,
4069 	WMI_10_4_PDEV_PARAM_PMF_QOS,
4070 	WMI_10_4_PDEV_PARAM_ARP_AC_OVERRIDE,
4071 	WMI_10_4_PDEV_PARAM_DCS,
4072 	WMI_10_4_PDEV_PARAM_ANI_ENABLE,
4073 	WMI_10_4_PDEV_PARAM_ANI_POLL_PERIOD,
4074 	WMI_10_4_PDEV_PARAM_ANI_LISTEN_PERIOD,
4075 	WMI_10_4_PDEV_PARAM_ANI_OFDM_LEVEL,
4076 	WMI_10_4_PDEV_PARAM_ANI_CCK_LEVEL,
4077 	WMI_10_4_PDEV_PARAM_DYNTXCHAIN,
4078 	WMI_10_4_PDEV_PARAM_PROXY_STA,
4079 	WMI_10_4_PDEV_PARAM_IDLE_PS_CONFIG,
4080 	WMI_10_4_PDEV_PARAM_POWER_GATING_SLEEP,
4081 	WMI_10_4_PDEV_PARAM_AGGR_BURST,
4082 	WMI_10_4_PDEV_PARAM_RX_DECAP_MODE,
4083 	WMI_10_4_PDEV_PARAM_FAST_CHANNEL_RESET,
4084 	WMI_10_4_PDEV_PARAM_BURST_DUR,
4085 	WMI_10_4_PDEV_PARAM_BURST_ENABLE,
4086 	WMI_10_4_PDEV_PARAM_SMART_ANTENNA_DEFAULT_ANTENNA,
4087 	WMI_10_4_PDEV_PARAM_IGMPMLD_OVERRIDE,
4088 	WMI_10_4_PDEV_PARAM_IGMPMLD_TID,
4089 	WMI_10_4_PDEV_PARAM_ANTENNA_GAIN,
4090 	WMI_10_4_PDEV_PARAM_RX_FILTER,
4091 	WMI_10_4_PDEV_SET_MCAST_TO_UCAST_TID,
4092 	WMI_10_4_PDEV_PARAM_PROXY_STA_MODE,
4093 	WMI_10_4_PDEV_PARAM_SET_MCAST2UCAST_MODE,
4094 	WMI_10_4_PDEV_PARAM_SET_MCAST2UCAST_BUFFER,
4095 	WMI_10_4_PDEV_PARAM_REMOVE_MCAST2UCAST_BUFFER,
4096 	WMI_10_4_PDEV_PEER_STA_PS_STATECHG_ENABLE,
4097 	WMI_10_4_PDEV_PARAM_IGMPMLD_AC_OVERRIDE,
4098 	WMI_10_4_PDEV_PARAM_BLOCK_INTERBSS,
4099 	WMI_10_4_PDEV_PARAM_SET_DISABLE_RESET_CMDID,
4100 	WMI_10_4_PDEV_PARAM_SET_MSDU_TTL_CMDID,
4101 	WMI_10_4_PDEV_PARAM_SET_PPDU_DURATION_CMDID,
4102 	WMI_10_4_PDEV_PARAM_TXBF_SOUND_PERIOD_CMDID,
4103 	WMI_10_4_PDEV_PARAM_SET_PROMISC_MODE_CMDID,
4104 	WMI_10_4_PDEV_PARAM_SET_BURST_MODE_CMDID,
4105 	WMI_10_4_PDEV_PARAM_EN_STATS,
4106 	WMI_10_4_PDEV_PARAM_MU_GROUP_POLICY,
4107 	WMI_10_4_PDEV_PARAM_NOISE_DETECTION,
4108 	WMI_10_4_PDEV_PARAM_NOISE_THRESHOLD,
4109 	WMI_10_4_PDEV_PARAM_DPD_ENABLE,
4110 	WMI_10_4_PDEV_PARAM_SET_MCAST_BCAST_ECHO,
4111 	WMI_10_4_PDEV_PARAM_ATF_STRICT_SCH,
4112 	WMI_10_4_PDEV_PARAM_ATF_SCHED_DURATION,
4113 	WMI_10_4_PDEV_PARAM_ANT_PLZN,
4114 	WMI_10_4_PDEV_PARAM_MGMT_RETRY_LIMIT,
4115 	WMI_10_4_PDEV_PARAM_SENSITIVITY_LEVEL,
4116 	WMI_10_4_PDEV_PARAM_SIGNED_TXPOWER_2G,
4117 	WMI_10_4_PDEV_PARAM_SIGNED_TXPOWER_5G,
4118 	WMI_10_4_PDEV_PARAM_ENABLE_PER_TID_AMSDU,
4119 	WMI_10_4_PDEV_PARAM_ENABLE_PER_TID_AMPDU,
4120 	WMI_10_4_PDEV_PARAM_CCA_THRESHOLD,
4121 	WMI_10_4_PDEV_PARAM_RTS_FIXED_RATE,
4122 	WMI_10_4_PDEV_PARAM_CAL_PERIOD,
4123 	WMI_10_4_PDEV_PARAM_PDEV_RESET,
4124 	WMI_10_4_PDEV_PARAM_WAPI_MBSSID_OFFSET,
4125 	WMI_10_4_PDEV_PARAM_ARP_SRCADDR,
4126 	WMI_10_4_PDEV_PARAM_ARP_DSTADDR,
4127 	WMI_10_4_PDEV_PARAM_TXPOWER_DECR_DB,
4128 	WMI_10_4_PDEV_PARAM_RX_BATCHMODE,
4129 	WMI_10_4_PDEV_PARAM_PACKET_AGGR_DELAY,
4130 	WMI_10_4_PDEV_PARAM_ATF_OBSS_NOISE_SCH,
4131 	WMI_10_4_PDEV_PARAM_ATF_OBSS_NOISE_SCALING_FACTOR,
4132 	WMI_10_4_PDEV_PARAM_CUST_TXPOWER_SCALE,
4133 	WMI_10_4_PDEV_PARAM_ATF_DYNAMIC_ENABLE,
4134 	WMI_10_4_PDEV_PARAM_ATF_SSID_GROUP_POLICY,
4135 	WMI_10_4_PDEV_PARAM_ENABLE_BTCOEX,
4136 };
4137 
4138 struct wmi_pdev_set_param_cmd {
4139 	__le32 param_id;
4140 	__le32 param_value;
4141 } __packed;
4142 
4143 struct wmi_pdev_set_base_macaddr_cmd {
4144 	struct wmi_mac_addr mac_addr;
4145 } __packed;
4146 
4147 /* valid period is 1 ~ 60000ms, unit in millisecond */
4148 #define WMI_PDEV_PARAM_CAL_PERIOD_MAX 60000
4149 
4150 struct wmi_pdev_get_tpc_config_cmd {
4151 	/* parameter   */
4152 	__le32 param;
4153 } __packed;
4154 
4155 #define WMI_TPC_CONFIG_PARAM		1
4156 #define WMI_TPC_FINAL_RATE_MAX		240
4157 #define WMI_TPC_TX_N_CHAIN		4
4158 #define WMI_TPC_RATE_MAX               (WMI_TPC_TX_N_CHAIN * 65)
4159 #define WMI_TPC_PREAM_TABLE_MAX		10
4160 #define WMI_TPC_FLAG			3
4161 #define WMI_TPC_BUF_SIZE		10
4162 #define WMI_TPC_BEAMFORMING		2
4163 
4164 enum wmi_tpc_table_type {
4165 	WMI_TPC_TABLE_TYPE_CDD = 0,
4166 	WMI_TPC_TABLE_TYPE_STBC = 1,
4167 	WMI_TPC_TABLE_TYPE_TXBF = 2,
4168 };
4169 
4170 enum wmi_tpc_config_event_flag {
4171 	WMI_TPC_CONFIG_EVENT_FLAG_TABLE_CDD	= 0x1,
4172 	WMI_TPC_CONFIG_EVENT_FLAG_TABLE_STBC	= 0x2,
4173 	WMI_TPC_CONFIG_EVENT_FLAG_TABLE_TXBF	= 0x4,
4174 };
4175 
4176 struct wmi_pdev_tpc_config_event {
4177 	__le32 reg_domain;
4178 	__le32 chan_freq;
4179 	__le32 phy_mode;
4180 	__le32 twice_antenna_reduction;
4181 	__le32 twice_max_rd_power;
4182 	a_sle32 twice_antenna_gain;
4183 	__le32 power_limit;
4184 	__le32 rate_max;
4185 	__le32 num_tx_chain;
4186 	__le32 ctl;
4187 	__le32 flags;
4188 	s8 max_reg_allow_pow[WMI_TPC_TX_N_CHAIN];
4189 	s8 max_reg_allow_pow_agcdd[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];
4190 	s8 max_reg_allow_pow_agstbc[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];
4191 	s8 max_reg_allow_pow_agtxbf[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];
4192 	u8 rates_array[WMI_TPC_RATE_MAX];
4193 } __packed;
4194 
4195 /* Transmit power scale factor. */
4196 enum wmi_tp_scale {
4197 	WMI_TP_SCALE_MAX    = 0,	/* no scaling (default) */
4198 	WMI_TP_SCALE_50     = 1,	/* 50% of max (-3 dBm) */
4199 	WMI_TP_SCALE_25     = 2,	/* 25% of max (-6 dBm) */
4200 	WMI_TP_SCALE_12     = 3,	/* 12% of max (-9 dBm) */
4201 	WMI_TP_SCALE_MIN    = 4,	/* min, but still on   */
4202 	WMI_TP_SCALE_SIZE   = 5,	/* max num of enum     */
4203 };
4204 
4205 struct wmi_pdev_tpc_final_table_event {
4206 	__le32 reg_domain;
4207 	__le32 chan_freq;
4208 	__le32 phy_mode;
4209 	__le32 twice_antenna_reduction;
4210 	__le32 twice_max_rd_power;
4211 	a_sle32 twice_antenna_gain;
4212 	__le32 power_limit;
4213 	__le32 rate_max;
4214 	__le32 num_tx_chain;
4215 	__le32 ctl;
4216 	__le32 flags;
4217 	s8 max_reg_allow_pow[WMI_TPC_TX_N_CHAIN];
4218 	s8 max_reg_allow_pow_agcdd[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];
4219 	s8 max_reg_allow_pow_agstbc[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];
4220 	s8 max_reg_allow_pow_agtxbf[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];
4221 	u8 rates_array[WMI_TPC_FINAL_RATE_MAX];
4222 	u8 ctl_power_table[WMI_TPC_BEAMFORMING][WMI_TPC_TX_N_CHAIN]
4223 	   [WMI_TPC_TX_N_CHAIN];
4224 } __packed;
4225 
4226 struct wmi_pdev_get_tpc_table_cmd {
4227 	__le32 param;
4228 } __packed;
4229 
4230 enum wmi_tpc_pream_2ghz {
4231 	WMI_TPC_PREAM_2GHZ_CCK = 0,
4232 	WMI_TPC_PREAM_2GHZ_OFDM,
4233 	WMI_TPC_PREAM_2GHZ_HT20,
4234 	WMI_TPC_PREAM_2GHZ_HT40,
4235 	WMI_TPC_PREAM_2GHZ_VHT20,
4236 	WMI_TPC_PREAM_2GHZ_VHT40,
4237 	WMI_TPC_PREAM_2GHZ_VHT80,
4238 };
4239 
4240 enum wmi_tpc_pream_5ghz {
4241 	WMI_TPC_PREAM_5GHZ_OFDM = 1,
4242 	WMI_TPC_PREAM_5GHZ_HT20,
4243 	WMI_TPC_PREAM_5GHZ_HT40,
4244 	WMI_TPC_PREAM_5GHZ_VHT20,
4245 	WMI_TPC_PREAM_5GHZ_VHT40,
4246 	WMI_TPC_PREAM_5GHZ_VHT80,
4247 	WMI_TPC_PREAM_5GHZ_HTCUP,
4248 };
4249 
4250 #define	WMI_PEER_PS_STATE_DISABLED	2
4251 
4252 struct wmi_peer_sta_ps_state_chg_event {
4253 	struct wmi_mac_addr peer_macaddr;
4254 	__le32 peer_ps_state;
4255 } __packed;
4256 
4257 struct wmi_pdev_chanlist_update_event {
4258 	/* number of channels */
4259 	__le32 num_chan;
4260 	/* array of channels */
4261 	struct wmi_channel channel_list[1];
4262 } __packed;
4263 
4264 #define WMI_MAX_DEBUG_MESG (sizeof(u32) * 32)
4265 
4266 struct wmi_debug_mesg_event {
4267 	/* message buffer, NULL terminated */
4268 	char bufp[WMI_MAX_DEBUG_MESG];
4269 } __packed;
4270 
4271 enum {
4272 	/* P2P device */
4273 	VDEV_SUBTYPE_P2PDEV = 0,
4274 	/* P2P client */
4275 	VDEV_SUBTYPE_P2PCLI,
4276 	/* P2P GO */
4277 	VDEV_SUBTYPE_P2PGO,
4278 	/* BT3.0 HS */
4279 	VDEV_SUBTYPE_BT,
4280 };
4281 
4282 struct wmi_pdev_set_channel_cmd {
4283 	/* idnore power , only use flags , mode and freq */
4284 	struct wmi_channel chan;
4285 } __packed;
4286 
4287 struct wmi_pdev_pktlog_enable_cmd {
4288 	__le32 ev_bitmap;
4289 } __packed;
4290 
4291 /* Customize the DSCP (bit) to TID (0-7) mapping for QOS */
4292 #define WMI_DSCP_MAP_MAX    (64)
4293 struct wmi_pdev_set_dscp_tid_map_cmd {
4294 	/* map indicating DSCP to TID conversion */
4295 	__le32 dscp_to_tid_map[WMI_DSCP_MAP_MAX];
4296 } __packed;
4297 
4298 enum mcast_bcast_rate_id {
4299 	WMI_SET_MCAST_RATE,
4300 	WMI_SET_BCAST_RATE
4301 };
4302 
4303 struct mcast_bcast_rate {
4304 	enum mcast_bcast_rate_id rate_id;
4305 	__le32 rate;
4306 } __packed;
4307 
4308 struct wmi_wmm_params {
4309 	__le32 cwmin;
4310 	__le32 cwmax;
4311 	__le32 aifs;
4312 	__le32 txop;
4313 	__le32 acm;
4314 	__le32 no_ack;
4315 } __packed;
4316 
4317 struct wmi_pdev_set_wmm_params {
4318 	struct wmi_wmm_params ac_be;
4319 	struct wmi_wmm_params ac_bk;
4320 	struct wmi_wmm_params ac_vi;
4321 	struct wmi_wmm_params ac_vo;
4322 } __packed;
4323 
4324 struct wmi_wmm_params_arg {
4325 	u32 cwmin;
4326 	u32 cwmax;
4327 	u32 aifs;
4328 	u32 txop;
4329 	u32 acm;
4330 	u32 no_ack;
4331 };
4332 
4333 struct wmi_wmm_params_all_arg {
4334 	struct wmi_wmm_params_arg ac_be;
4335 	struct wmi_wmm_params_arg ac_bk;
4336 	struct wmi_wmm_params_arg ac_vi;
4337 	struct wmi_wmm_params_arg ac_vo;
4338 };
4339 
4340 struct wmi_pdev_stats_tx {
4341 	/* Num HTT cookies queued to dispatch list */
4342 	__le32 comp_queued;
4343 
4344 	/* Num HTT cookies dispatched */
4345 	__le32 comp_delivered;
4346 
4347 	/* Num MSDU queued to WAL */
4348 	__le32 msdu_enqued;
4349 
4350 	/* Num MPDU queue to WAL */
4351 	__le32 mpdu_enqued;
4352 
4353 	/* Num MSDUs dropped by WMM limit */
4354 	__le32 wmm_drop;
4355 
4356 	/* Num Local frames queued */
4357 	__le32 local_enqued;
4358 
4359 	/* Num Local frames done */
4360 	__le32 local_freed;
4361 
4362 	/* Num queued to HW */
4363 	__le32 hw_queued;
4364 
4365 	/* Num PPDU reaped from HW */
4366 	__le32 hw_reaped;
4367 
4368 	/* Num underruns */
4369 	__le32 underrun;
4370 
4371 	/* Num PPDUs cleaned up in TX abort */
4372 	__le32 tx_abort;
4373 
4374 	/* Num MPDUs requeued by SW */
4375 	__le32 mpdus_requeued;
4376 
4377 	/* excessive retries */
4378 	__le32 tx_ko;
4379 
4380 	/* data hw rate code */
4381 	__le32 data_rc;
4382 
4383 	/* Scheduler self triggers */
4384 	__le32 self_triggers;
4385 
4386 	/* frames dropped due to excessive sw retries */
4387 	__le32 sw_retry_failure;
4388 
4389 	/* illegal rate phy errors  */
4390 	__le32 illgl_rate_phy_err;
4391 
4392 	/* wal pdev continuous xretry */
4393 	__le32 pdev_cont_xretry;
4394 
4395 	/* wal pdev continous xretry */
4396 	__le32 pdev_tx_timeout;
4397 
4398 	/* wal pdev resets  */
4399 	__le32 pdev_resets;
4400 
4401 	/* frames dropped due to non-availability of stateless TIDs */
4402 	__le32 stateless_tid_alloc_failure;
4403 
4404 	__le32 phy_underrun;
4405 
4406 	/* MPDU is more than txop limit */
4407 	__le32 txop_ovf;
4408 } __packed;
4409 
4410 struct wmi_10_4_pdev_stats_tx {
4411 	/* Num HTT cookies queued to dispatch list */
4412 	__le32 comp_queued;
4413 
4414 	/* Num HTT cookies dispatched */
4415 	__le32 comp_delivered;
4416 
4417 	/* Num MSDU queued to WAL */
4418 	__le32 msdu_enqued;
4419 
4420 	/* Num MPDU queue to WAL */
4421 	__le32 mpdu_enqued;
4422 
4423 	/* Num MSDUs dropped by WMM limit */
4424 	__le32 wmm_drop;
4425 
4426 	/* Num Local frames queued */
4427 	__le32 local_enqued;
4428 
4429 	/* Num Local frames done */
4430 	__le32 local_freed;
4431 
4432 	/* Num queued to HW */
4433 	__le32 hw_queued;
4434 
4435 	/* Num PPDU reaped from HW */
4436 	__le32 hw_reaped;
4437 
4438 	/* Num underruns */
4439 	__le32 underrun;
4440 
4441 	/* HW Paused. */
4442 	__le32  hw_paused;
4443 
4444 	/* Num PPDUs cleaned up in TX abort */
4445 	__le32 tx_abort;
4446 
4447 	/* Num MPDUs requeued by SW */
4448 	__le32 mpdus_requeued;
4449 
4450 	/* excessive retries */
4451 	__le32 tx_ko;
4452 
4453 	/* data hw rate code */
4454 	__le32 data_rc;
4455 
4456 	/* Scheduler self triggers */
4457 	__le32 self_triggers;
4458 
4459 	/* frames dropped due to excessive sw retries */
4460 	__le32 sw_retry_failure;
4461 
4462 	/* illegal rate phy errors  */
4463 	__le32 illgl_rate_phy_err;
4464 
4465 	/* wal pdev continuous xretry */
4466 	__le32 pdev_cont_xretry;
4467 
4468 	/* wal pdev tx timeouts */
4469 	__le32 pdev_tx_timeout;
4470 
4471 	/* wal pdev resets  */
4472 	__le32 pdev_resets;
4473 
4474 	/* frames dropped due to non-availability of stateless TIDs */
4475 	__le32 stateless_tid_alloc_failure;
4476 
4477 	__le32 phy_underrun;
4478 
4479 	/* MPDU is more than txop limit */
4480 	__le32 txop_ovf;
4481 
4482 	/* Number of Sequences posted */
4483 	__le32 seq_posted;
4484 
4485 	/* Number of Sequences failed queueing */
4486 	__le32 seq_failed_queueing;
4487 
4488 	/* Number of Sequences completed */
4489 	__le32 seq_completed;
4490 
4491 	/* Number of Sequences restarted */
4492 	__le32 seq_restarted;
4493 
4494 	/* Number of MU Sequences posted */
4495 	__le32 mu_seq_posted;
4496 
4497 	/* Num MPDUs flushed by SW, HWPAUSED,SW TXABORT(Reset,channel change) */
4498 	__le32 mpdus_sw_flush;
4499 
4500 	/* Num MPDUs filtered by HW, all filter condition (TTL expired) */
4501 	__le32 mpdus_hw_filter;
4502 
4503 	/* Num MPDUs truncated by PDG
4504 	 * (TXOP, TBTT, PPDU_duration based on rate, dyn_bw)
4505 	 */
4506 	__le32 mpdus_truncated;
4507 
4508 	/* Num MPDUs that was tried but didn't receive ACK or BA */
4509 	__le32 mpdus_ack_failed;
4510 
4511 	/* Num MPDUs that was dropped due to expiry. */
4512 	__le32 mpdus_expired;
4513 } __packed;
4514 
4515 struct wmi_pdev_stats_rx {
4516 	/* Cnts any change in ring routing mid-ppdu */
4517 	__le32 mid_ppdu_route_change;
4518 
4519 	/* Total number of statuses processed */
4520 	__le32 status_rcvd;
4521 
4522 	/* Extra frags on rings 0-3 */
4523 	__le32 r0_frags;
4524 	__le32 r1_frags;
4525 	__le32 r2_frags;
4526 	__le32 r3_frags;
4527 
4528 	/* MSDUs / MPDUs delivered to HTT */
4529 	__le32 htt_msdus;
4530 	__le32 htt_mpdus;
4531 
4532 	/* MSDUs / MPDUs delivered to local stack */
4533 	__le32 loc_msdus;
4534 	__le32 loc_mpdus;
4535 
4536 	/* AMSDUs that have more MSDUs than the status ring size */
4537 	__le32 oversize_amsdu;
4538 
4539 	/* Number of PHY errors */
4540 	__le32 phy_errs;
4541 
4542 	/* Number of PHY errors drops */
4543 	__le32 phy_err_drop;
4544 
4545 	/* Number of mpdu errors - FCS, MIC, ENC etc. */
4546 	__le32 mpdu_errs;
4547 } __packed;
4548 
4549 struct wmi_pdev_stats_peer {
4550 	/* REMOVE THIS ONCE REAL PEER STAT COUNTERS ARE ADDED */
4551 	__le32 dummy;
4552 } __packed;
4553 
4554 enum wmi_stats_id {
4555 	WMI_STAT_PEER = BIT(0),
4556 	WMI_STAT_AP = BIT(1),
4557 	WMI_STAT_PDEV = BIT(2),
4558 	WMI_STAT_VDEV = BIT(3),
4559 	WMI_STAT_BCNFLT = BIT(4),
4560 	WMI_STAT_VDEV_RATE = BIT(5),
4561 };
4562 
4563 enum wmi_10_4_stats_id {
4564 	WMI_10_4_STAT_PEER		= BIT(0),
4565 	WMI_10_4_STAT_AP		= BIT(1),
4566 	WMI_10_4_STAT_INST		= BIT(2),
4567 	WMI_10_4_STAT_PEER_EXTD		= BIT(3),
4568 	WMI_10_4_STAT_VDEV_EXTD		= BIT(4),
4569 };
4570 
4571 enum wmi_tlv_stats_id {
4572 	WMI_TLV_STAT_PEER	= BIT(0),
4573 	WMI_TLV_STAT_AP		= BIT(1),
4574 	WMI_TLV_STAT_PDEV	= BIT(2),
4575 	WMI_TLV_STAT_VDEV	= BIT(3),
4576 	WMI_TLV_STAT_PEER_EXTD  = BIT(10),
4577 };
4578 
4579 struct wlan_inst_rssi_args {
4580 	__le16 cfg_retry_count;
4581 	__le16 retry_count;
4582 };
4583 
4584 struct wmi_request_stats_cmd {
4585 	__le32 stats_id;
4586 
4587 	__le32 vdev_id;
4588 
4589 	/* peer MAC address */
4590 	struct wmi_mac_addr peer_macaddr;
4591 
4592 	/* Instantaneous RSSI arguments */
4593 	struct wlan_inst_rssi_args inst_rssi_args;
4594 } __packed;
4595 
4596 enum wmi_peer_stats_info_request_type {
4597 	/* request stats of one specified peer */
4598 	WMI_REQUEST_ONE_PEER_STATS_INFO = 0x01,
4599 	/* request stats of all peers belong to specified VDEV */
4600 	WMI_REQUEST_VDEV_ALL_PEER_STATS_INFO = 0x02,
4601 };
4602 
4603 /* Suspend option */
4604 enum {
4605 	/* suspend */
4606 	WMI_PDEV_SUSPEND,
4607 
4608 	/* suspend and disable all interrupts */
4609 	WMI_PDEV_SUSPEND_AND_DISABLE_INTR,
4610 };
4611 
4612 struct wmi_pdev_suspend_cmd {
4613 	/* suspend option sent to target */
4614 	__le32 suspend_opt;
4615 } __packed;
4616 
4617 struct wmi_stats_event {
4618 	__le32 stats_id; /* WMI_STAT_ */
4619 	/*
4620 	 * number of pdev stats event structures
4621 	 * (wmi_pdev_stats) 0 or 1
4622 	 */
4623 	__le32 num_pdev_stats;
4624 	/*
4625 	 * number of vdev stats event structures
4626 	 * (wmi_vdev_stats) 0 or max vdevs
4627 	 */
4628 	__le32 num_vdev_stats;
4629 	/*
4630 	 * number of peer stats event structures
4631 	 * (wmi_peer_stats) 0 or max peers
4632 	 */
4633 	__le32 num_peer_stats;
4634 	__le32 num_bcnflt_stats;
4635 	/*
4636 	 * followed by
4637 	 *   num_pdev_stats * size of(struct wmi_pdev_stats)
4638 	 *   num_vdev_stats * size of(struct wmi_vdev_stats)
4639 	 *   num_peer_stats * size of(struct wmi_peer_stats)
4640 	 *
4641 	 *  By having a zero sized array, the pointer to data area
4642 	 *  becomes available without increasing the struct size
4643 	 */
4644 	u8 data[];
4645 } __packed;
4646 
4647 struct wmi_10_2_stats_event {
4648 	__le32 stats_id; /* %WMI_REQUEST_ */
4649 	__le32 num_pdev_stats;
4650 	__le32 num_pdev_ext_stats;
4651 	__le32 num_vdev_stats;
4652 	__le32 num_peer_stats;
4653 	__le32 num_bcnflt_stats;
4654 	u8 data[];
4655 } __packed;
4656 
4657 /*
4658  * PDEV statistics
4659  * TODO: add all PDEV stats here
4660  */
4661 struct wmi_pdev_stats_base {
4662 	__le32 chan_nf;
4663 	__le32 tx_frame_count; /* Cycles spent transmitting frames */
4664 	__le32 rx_frame_count; /* Cycles spent receiving frames */
4665 	__le32 rx_clear_count; /* Total channel busy time, evidently */
4666 	__le32 cycle_count; /* Total on-channel time */
4667 	__le32 phy_err_count;
4668 	__le32 chan_tx_pwr;
4669 } __packed;
4670 
4671 struct wmi_pdev_stats {
4672 	struct wmi_pdev_stats_base base;
4673 	struct wmi_pdev_stats_tx tx;
4674 	struct wmi_pdev_stats_rx rx;
4675 	struct wmi_pdev_stats_peer peer;
4676 } __packed;
4677 
4678 struct wmi_pdev_stats_extra {
4679 	__le32 ack_rx_bad;
4680 	__le32 rts_bad;
4681 	__le32 rts_good;
4682 	__le32 fcs_bad;
4683 	__le32 no_beacons;
4684 	__le32 mib_int_count;
4685 } __packed;
4686 
4687 struct wmi_10x_pdev_stats {
4688 	struct wmi_pdev_stats_base base;
4689 	struct wmi_pdev_stats_tx tx;
4690 	struct wmi_pdev_stats_rx rx;
4691 	struct wmi_pdev_stats_peer peer;
4692 	struct wmi_pdev_stats_extra extra;
4693 } __packed;
4694 
4695 struct wmi_pdev_stats_mem {
4696 	__le32 dram_free;
4697 	__le32 iram_free;
4698 } __packed;
4699 
4700 struct wmi_10_2_pdev_stats {
4701 	struct wmi_pdev_stats_base base;
4702 	struct wmi_pdev_stats_tx tx;
4703 	__le32 mc_drop;
4704 	struct wmi_pdev_stats_rx rx;
4705 	__le32 pdev_rx_timeout;
4706 	struct wmi_pdev_stats_mem mem;
4707 	struct wmi_pdev_stats_peer peer;
4708 	struct wmi_pdev_stats_extra extra;
4709 } __packed;
4710 
4711 struct wmi_10_4_pdev_stats {
4712 	struct wmi_pdev_stats_base base;
4713 	struct wmi_10_4_pdev_stats_tx tx;
4714 	struct wmi_pdev_stats_rx rx;
4715 	__le32 rx_ovfl_errs;
4716 	struct wmi_pdev_stats_mem mem;
4717 	__le32 sram_free_size;
4718 	struct wmi_pdev_stats_extra extra;
4719 } __packed;
4720 
4721 /*
4722  * VDEV statistics
4723  */
4724 
4725 #define WMI_VDEV_STATS_FTM_COUNT_VALID	BIT(31)
4726 #define WMI_VDEV_STATS_FTM_COUNT_LSB	0
4727 #define WMI_VDEV_STATS_FTM_COUNT_MASK	0x7fffffff
4728 
4729 struct wmi_vdev_stats {
4730 	__le32 vdev_id;
4731 } __packed;
4732 
4733 struct wmi_vdev_stats_extd {
4734 	__le32 vdev_id;
4735 	__le32 ppdu_aggr_cnt;
4736 	__le32 ppdu_noack;
4737 	__le32 mpdu_queued;
4738 	__le32 ppdu_nonaggr_cnt;
4739 	__le32 mpdu_sw_requeued;
4740 	__le32 mpdu_suc_retry;
4741 	__le32 mpdu_suc_multitry;
4742 	__le32 mpdu_fail_retry;
4743 	__le32 tx_ftm_suc;
4744 	__le32 tx_ftm_suc_retry;
4745 	__le32 tx_ftm_fail;
4746 	__le32 rx_ftmr_cnt;
4747 	__le32 rx_ftmr_dup_cnt;
4748 	__le32 rx_iftmr_cnt;
4749 	__le32 rx_iftmr_dup_cnt;
4750 	__le32 reserved[6];
4751 } __packed;
4752 
4753 /*
4754  * peer statistics.
4755  * TODO: add more stats
4756  */
4757 struct wmi_peer_stats {
4758 	struct wmi_mac_addr peer_macaddr;
4759 	__le32 peer_rssi;
4760 	__le32 peer_tx_rate;
4761 } __packed;
4762 
4763 struct wmi_10x_peer_stats {
4764 	struct wmi_peer_stats old;
4765 	__le32 peer_rx_rate;
4766 } __packed;
4767 
4768 struct wmi_10_2_peer_stats {
4769 	struct wmi_peer_stats old;
4770 	__le32 peer_rx_rate;
4771 	__le32 current_per;
4772 	__le32 retries;
4773 	__le32 tx_rate_count;
4774 	__le32 max_4ms_frame_len;
4775 	__le32 total_sub_frames;
4776 	__le32 tx_bytes;
4777 	__le32 num_pkt_loss_overflow[4];
4778 	__le32 num_pkt_loss_excess_retry[4];
4779 } __packed;
4780 
4781 struct wmi_10_2_4_peer_stats {
4782 	struct wmi_10_2_peer_stats common;
4783 	__le32 peer_rssi_changed;
4784 } __packed;
4785 
4786 struct wmi_10_2_4_ext_peer_stats {
4787 	struct wmi_10_2_peer_stats common;
4788 	__le32 peer_rssi_changed;
4789 	__le32 rx_duration;
4790 } __packed;
4791 
4792 struct wmi_10_4_peer_stats {
4793 	struct wmi_mac_addr peer_macaddr;
4794 	__le32 peer_rssi;
4795 	__le32 peer_rssi_seq_num;
4796 	__le32 peer_tx_rate;
4797 	__le32 peer_rx_rate;
4798 	__le32 current_per;
4799 	__le32 retries;
4800 	__le32 tx_rate_count;
4801 	__le32 max_4ms_frame_len;
4802 	__le32 total_sub_frames;
4803 	__le32 tx_bytes;
4804 	__le32 num_pkt_loss_overflow[4];
4805 	__le32 num_pkt_loss_excess_retry[4];
4806 	__le32 peer_rssi_changed;
4807 } __packed;
4808 
4809 struct wmi_10_4_peer_extd_stats {
4810 	struct wmi_mac_addr peer_macaddr;
4811 	__le32 inactive_time;
4812 	__le32 peer_chain_rssi;
4813 	__le32 rx_duration;
4814 	__le32 reserved[10];
4815 } __packed;
4816 
4817 struct wmi_10_4_bss_bcn_stats {
4818 	__le32 vdev_id;
4819 	__le32 bss_bcns_dropped;
4820 	__le32 bss_bcn_delivered;
4821 } __packed;
4822 
4823 struct wmi_10_4_bss_bcn_filter_stats {
4824 	__le32 bcns_dropped;
4825 	__le32 bcns_delivered;
4826 	__le32 active_filters;
4827 	struct wmi_10_4_bss_bcn_stats bss_stats;
4828 } __packed;
4829 
4830 struct wmi_10_2_pdev_ext_stats {
4831 	__le32 rx_rssi_comb;
4832 	__le32 rx_rssi[4];
4833 	__le32 rx_mcs[10];
4834 	__le32 tx_mcs[10];
4835 	__le32 ack_rssi;
4836 } __packed;
4837 
4838 struct wmi_vdev_create_cmd {
4839 	__le32 vdev_id;
4840 	__le32 vdev_type;
4841 	__le32 vdev_subtype;
4842 	struct wmi_mac_addr vdev_macaddr;
4843 } __packed;
4844 
4845 enum wmi_vdev_type {
4846 	WMI_VDEV_TYPE_AP      = 1,
4847 	WMI_VDEV_TYPE_STA     = 2,
4848 	WMI_VDEV_TYPE_IBSS    = 3,
4849 	WMI_VDEV_TYPE_MONITOR = 4,
4850 };
4851 
4852 enum wmi_vdev_subtype {
4853 	WMI_VDEV_SUBTYPE_NONE,
4854 	WMI_VDEV_SUBTYPE_P2P_DEVICE,
4855 	WMI_VDEV_SUBTYPE_P2P_CLIENT,
4856 	WMI_VDEV_SUBTYPE_P2P_GO,
4857 	WMI_VDEV_SUBTYPE_PROXY_STA,
4858 	WMI_VDEV_SUBTYPE_MESH_11S,
4859 	WMI_VDEV_SUBTYPE_MESH_NON_11S,
4860 };
4861 
4862 enum wmi_vdev_subtype_legacy {
4863 	WMI_VDEV_SUBTYPE_LEGACY_NONE      = 0,
4864 	WMI_VDEV_SUBTYPE_LEGACY_P2P_DEV   = 1,
4865 	WMI_VDEV_SUBTYPE_LEGACY_P2P_CLI   = 2,
4866 	WMI_VDEV_SUBTYPE_LEGACY_P2P_GO    = 3,
4867 	WMI_VDEV_SUBTYPE_LEGACY_PROXY_STA = 4,
4868 };
4869 
4870 enum wmi_vdev_subtype_10_2_4 {
4871 	WMI_VDEV_SUBTYPE_10_2_4_NONE      = 0,
4872 	WMI_VDEV_SUBTYPE_10_2_4_P2P_DEV   = 1,
4873 	WMI_VDEV_SUBTYPE_10_2_4_P2P_CLI   = 2,
4874 	WMI_VDEV_SUBTYPE_10_2_4_P2P_GO    = 3,
4875 	WMI_VDEV_SUBTYPE_10_2_4_PROXY_STA = 4,
4876 	WMI_VDEV_SUBTYPE_10_2_4_MESH_11S  = 5,
4877 };
4878 
4879 enum wmi_vdev_subtype_10_4 {
4880 	WMI_VDEV_SUBTYPE_10_4_NONE         = 0,
4881 	WMI_VDEV_SUBTYPE_10_4_P2P_DEV      = 1,
4882 	WMI_VDEV_SUBTYPE_10_4_P2P_CLI      = 2,
4883 	WMI_VDEV_SUBTYPE_10_4_P2P_GO       = 3,
4884 	WMI_VDEV_SUBTYPE_10_4_PROXY_STA    = 4,
4885 	WMI_VDEV_SUBTYPE_10_4_MESH_NON_11S = 5,
4886 	WMI_VDEV_SUBTYPE_10_4_MESH_11S     = 6,
4887 };
4888 
4889 /* values for vdev_subtype */
4890 
4891 /* values for vdev_start_request flags */
4892 /*
4893  * Indicates that AP VDEV uses hidden ssid. only valid for
4894  *  AP/GO
4895  */
4896 #define WMI_VDEV_START_HIDDEN_SSID  (1 << 0)
4897 /*
4898  * Indicates if robust management frame/management frame
4899  *  protection is enabled. For GO/AP vdevs, it indicates that
4900  *  it may support station/client associations with RMF enabled.
4901  *  For STA/client vdevs, it indicates that sta will
4902  *  associate with AP with RMF enabled.
4903  */
4904 #define WMI_VDEV_START_PMF_ENABLED  (1 << 1)
4905 
4906 struct wmi_p2p_noa_descriptor {
4907 	__le32 type_count; /* 255: continuous schedule, 0: reserved */
4908 	__le32 duration;  /* Absent period duration in micro seconds */
4909 	__le32 interval;   /* Absent period interval in micro seconds */
4910 	__le32 start_time; /* 32 bit tsf time when in starts */
4911 } __packed;
4912 
4913 struct wmi_vdev_start_request_cmd {
4914 	/* WMI channel */
4915 	struct wmi_channel chan;
4916 	/* unique id identifying the VDEV, generated by the caller */
4917 	__le32 vdev_id;
4918 	/* requestor id identifying the caller module */
4919 	__le32 requestor_id;
4920 	/* beacon interval from received beacon */
4921 	__le32 beacon_interval;
4922 	/* DTIM Period from the received beacon */
4923 	__le32 dtim_period;
4924 	/* Flags */
4925 	__le32 flags;
4926 	/* ssid field. Only valid for AP/GO/IBSS/BTAmp VDEV type. */
4927 	struct wmi_ssid ssid;
4928 	/* beacon/probe response xmit rate. Applicable for SoftAP. */
4929 	__le32 bcn_tx_rate;
4930 	/* beacon/probe response xmit power. Applicable for SoftAP. */
4931 	__le32 bcn_tx_power;
4932 	/* number of p2p NOA descriptor(s) from scan entry */
4933 	__le32 num_noa_descriptors;
4934 	/*
4935 	 * Disable H/W ack. This used by WMI_VDEV_RESTART_REQUEST_CMDID.
4936 	 * During CAC, Our HW shouldn't ack ditected frames
4937 	 */
4938 	__le32 disable_hw_ack;
4939 	/* actual p2p NOA descriptor from scan entry */
4940 	struct wmi_p2p_noa_descriptor noa_descriptors[2];
4941 } __packed;
4942 
4943 struct wmi_vdev_restart_request_cmd {
4944 	struct wmi_vdev_start_request_cmd vdev_start_request_cmd;
4945 } __packed;
4946 
4947 struct wmi_vdev_start_request_arg {
4948 	u32 vdev_id;
4949 	struct wmi_channel_arg channel;
4950 	u32 bcn_intval;
4951 	u32 dtim_period;
4952 	u8 *ssid;
4953 	u32 ssid_len;
4954 	u32 bcn_tx_rate;
4955 	u32 bcn_tx_power;
4956 	bool disable_hw_ack;
4957 	bool hidden_ssid;
4958 	bool pmf_enabled;
4959 };
4960 
4961 struct wmi_vdev_delete_cmd {
4962 	/* unique id identifying the VDEV, generated by the caller */
4963 	__le32 vdev_id;
4964 } __packed;
4965 
4966 struct wmi_vdev_up_cmd {
4967 	__le32 vdev_id;
4968 	__le32 vdev_assoc_id;
4969 	struct wmi_mac_addr vdev_bssid;
4970 } __packed;
4971 
4972 struct wmi_vdev_stop_cmd {
4973 	__le32 vdev_id;
4974 } __packed;
4975 
4976 struct wmi_vdev_down_cmd {
4977 	__le32 vdev_id;
4978 } __packed;
4979 
4980 struct wmi_vdev_standby_response_cmd {
4981 	/* unique id identifying the VDEV, generated by the caller */
4982 	__le32 vdev_id;
4983 } __packed;
4984 
4985 struct wmi_vdev_resume_response_cmd {
4986 	/* unique id identifying the VDEV, generated by the caller */
4987 	__le32 vdev_id;
4988 } __packed;
4989 
4990 struct wmi_vdev_set_param_cmd {
4991 	__le32 vdev_id;
4992 	__le32 param_id;
4993 	__le32 param_value;
4994 } __packed;
4995 
4996 #define WMI_MAX_KEY_INDEX   3
4997 #define WMI_MAX_KEY_LEN     32
4998 
4999 #define WMI_KEY_PAIRWISE 0x00
5000 #define WMI_KEY_GROUP    0x01
5001 #define WMI_KEY_TX_USAGE 0x02 /* default tx key - static wep */
5002 
5003 struct wmi_key_seq_counter {
5004 	__le32 key_seq_counter_l;
5005 	__le32 key_seq_counter_h;
5006 } __packed;
5007 
5008 enum wmi_cipher_suites {
5009 	WMI_CIPHER_NONE,
5010 	WMI_CIPHER_WEP,
5011 	WMI_CIPHER_TKIP,
5012 	WMI_CIPHER_AES_OCB,
5013 	WMI_CIPHER_AES_CCM,
5014 	WMI_CIPHER_WAPI,
5015 	WMI_CIPHER_CKIP,
5016 	WMI_CIPHER_AES_CMAC,
5017 	WMI_CIPHER_AES_GCM,
5018 };
5019 
5020 enum wmi_tlv_cipher_suites {
5021 	WMI_TLV_CIPHER_NONE,
5022 	WMI_TLV_CIPHER_WEP,
5023 	WMI_TLV_CIPHER_TKIP,
5024 	WMI_TLV_CIPHER_AES_OCB,
5025 	WMI_TLV_CIPHER_AES_CCM,
5026 	WMI_TLV_CIPHER_WAPI,
5027 	WMI_TLV_CIPHER_CKIP,
5028 	WMI_TLV_CIPHER_AES_CMAC,
5029 	WMI_TLV_CIPHER_ANY,
5030 	WMI_TLV_CIPHER_AES_GCM,
5031 };
5032 
5033 struct wmi_vdev_install_key_cmd {
5034 	__le32 vdev_id;
5035 	struct wmi_mac_addr peer_macaddr;
5036 	__le32 key_idx;
5037 	__le32 key_flags;
5038 	__le32 key_cipher; /* %WMI_CIPHER_ */
5039 	struct wmi_key_seq_counter key_rsc_counter;
5040 	struct wmi_key_seq_counter key_global_rsc_counter;
5041 	struct wmi_key_seq_counter key_tsc_counter;
5042 	u8 wpi_key_rsc_counter[16];
5043 	u8 wpi_key_tsc_counter[16];
5044 	__le32 key_len;
5045 	__le32 key_txmic_len;
5046 	__le32 key_rxmic_len;
5047 
5048 	/* contains key followed by tx mic followed by rx mic */
5049 	u8 key_data[];
5050 } __packed;
5051 
5052 struct wmi_vdev_install_key_arg {
5053 	u32 vdev_id;
5054 	const u8 *macaddr;
5055 	u32 key_idx;
5056 	u32 key_flags;
5057 	u32 key_cipher;
5058 	u32 key_len;
5059 	u32 key_txmic_len;
5060 	u32 key_rxmic_len;
5061 	const void *key_data;
5062 };
5063 
5064 /*
5065  * vdev fixed rate format:
5066  * - preamble - b7:b6 - see WMI_RATE_PREMABLE_
5067  * - nss      - b5:b4 - ss number (0 mean 1ss)
5068  * - rate_mcs - b3:b0 - as below
5069  *    CCK:  0 - 11Mbps, 1 - 5,5Mbps, 2 - 2Mbps, 3 - 1Mbps,
5070  *          4 - 11Mbps (s), 5 - 5,5Mbps (s), 6 - 2Mbps (s)
5071  *    OFDM: 0 - 48Mbps, 1 - 24Mbps, 2 - 12Mbps, 3 - 6Mbps,
5072  *          4 - 54Mbps, 5 - 36Mbps, 6 - 18Mbps, 7 - 9Mbps
5073  *    HT/VHT: MCS index
5074  */
5075 
5076 /* Preamble types to be used with VDEV fixed rate configuration */
5077 enum wmi_rate_preamble {
5078 	WMI_RATE_PREAMBLE_OFDM,
5079 	WMI_RATE_PREAMBLE_CCK,
5080 	WMI_RATE_PREAMBLE_HT,
5081 	WMI_RATE_PREAMBLE_VHT,
5082 };
5083 
5084 #define ATH10K_HW_NSS(rate)		(1 + (((rate) >> 4) & 0x3))
5085 #define ATH10K_HW_PREAMBLE(rate)	(((rate) >> 6) & 0x3)
5086 #define ATH10K_HW_MCS_RATE(rate)	((rate) & 0xf)
5087 #define ATH10K_HW_LEGACY_RATE(rate)	((rate) & 0x3f)
5088 #define ATH10K_HW_BW(flags)		(((flags) >> 3) & 0x3)
5089 #define ATH10K_HW_GI(flags)		(((flags) >> 5) & 0x1)
5090 #define ATH10K_HW_RATECODE(rate, nss, preamble) \
5091 	(((preamble) << 6) | ((nss) << 4) | (rate))
5092 #define ATH10K_HW_AMPDU(flags)		((flags) & 0x1)
5093 #define ATH10K_HW_BA_FAIL(flags)	(((flags) >> 1) & 0x3)
5094 #define ATH10K_FW_SKIPPED_RATE_CTRL(flags)	(((flags) >> 6) & 0x1)
5095 
5096 #define ATH10K_VHT_MCS_NUM	10
5097 #define ATH10K_BW_NUM		6
5098 #define ATH10K_NSS_NUM		4
5099 #define ATH10K_LEGACY_NUM	12
5100 #define ATH10K_GI_NUM		2
5101 #define ATH10K_HT_MCS_NUM	32
5102 #define ATH10K_RATE_TABLE_NUM	320
5103 #define ATH10K_RATE_INFO_FLAGS_SGI_BIT	2
5104 
5105 /* Value to disable fixed rate setting */
5106 #define WMI_FIXED_RATE_NONE    (0xff)
5107 
5108 struct wmi_peer_param_map {
5109 	u32 smps_state;
5110 	u32 ampdu;
5111 	u32 authorize;
5112 	u32 chan_width;
5113 	u32 nss;
5114 	u32 use_4addr;
5115 	u32 membership;
5116 	u32 use_fixed_power;
5117 	u32 user_pos;
5118 	u32 crit_proto_hint_enabled;
5119 	u32 tx_fail_cnt_thr;
5120 	u32 set_hw_retry_cts2s;
5121 	u32 ibss_atim_win_len;
5122 	u32 debug;
5123 	u32 phymode;
5124 	u32 dummy_var;
5125 };
5126 
5127 struct wmi_vdev_param_map {
5128 	u32 rts_threshold;
5129 	u32 fragmentation_threshold;
5130 	u32 beacon_interval;
5131 	u32 listen_interval;
5132 	u32 multicast_rate;
5133 	u32 mgmt_tx_rate;
5134 	u32 slot_time;
5135 	u32 preamble;
5136 	u32 swba_time;
5137 	u32 wmi_vdev_stats_update_period;
5138 	u32 wmi_vdev_pwrsave_ageout_time;
5139 	u32 wmi_vdev_host_swba_interval;
5140 	u32 dtim_period;
5141 	u32 wmi_vdev_oc_scheduler_air_time_limit;
5142 	u32 wds;
5143 	u32 atim_window;
5144 	u32 bmiss_count_max;
5145 	u32 bmiss_first_bcnt;
5146 	u32 bmiss_final_bcnt;
5147 	u32 feature_wmm;
5148 	u32 chwidth;
5149 	u32 chextoffset;
5150 	u32 disable_htprotection;
5151 	u32 sta_quickkickout;
5152 	u32 mgmt_rate;
5153 	u32 protection_mode;
5154 	u32 fixed_rate;
5155 	u32 sgi;
5156 	u32 ldpc;
5157 	u32 tx_stbc;
5158 	u32 rx_stbc;
5159 	u32 intra_bss_fwd;
5160 	u32 def_keyid;
5161 	u32 nss;
5162 	u32 bcast_data_rate;
5163 	u32 mcast_data_rate;
5164 	u32 mcast_indicate;
5165 	u32 dhcp_indicate;
5166 	u32 unknown_dest_indicate;
5167 	u32 ap_keepalive_min_idle_inactive_time_secs;
5168 	u32 ap_keepalive_max_idle_inactive_time_secs;
5169 	u32 ap_keepalive_max_unresponsive_time_secs;
5170 	u32 ap_enable_nawds;
5171 	u32 mcast2ucast_set;
5172 	u32 enable_rtscts;
5173 	u32 txbf;
5174 	u32 packet_powersave;
5175 	u32 drop_unencry;
5176 	u32 tx_encap_type;
5177 	u32 ap_detect_out_of_sync_sleeping_sta_time_secs;
5178 	u32 rc_num_retries;
5179 	u32 cabq_maxdur;
5180 	u32 mfptest_set;
5181 	u32 rts_fixed_rate;
5182 	u32 vht_sgimask;
5183 	u32 vht80_ratemask;
5184 	u32 early_rx_adjust_enable;
5185 	u32 early_rx_tgt_bmiss_num;
5186 	u32 early_rx_bmiss_sample_cycle;
5187 	u32 early_rx_slop_step;
5188 	u32 early_rx_init_slop;
5189 	u32 early_rx_adjust_pause;
5190 	u32 proxy_sta;
5191 	u32 meru_vc;
5192 	u32 rx_decap_type;
5193 	u32 bw_nss_ratemask;
5194 	u32 inc_tsf;
5195 	u32 dec_tsf;
5196 	u32 disable_4addr_src_lrn;
5197 	u32 rtt_responder_role;
5198 };
5199 
5200 #define WMI_VDEV_PARAM_UNSUPPORTED 0
5201 
5202 /* the definition of different VDEV parameters */
5203 enum wmi_vdev_param {
5204 	/* RTS Threshold */
5205 	WMI_VDEV_PARAM_RTS_THRESHOLD = 0x1,
5206 	/* Fragmentation threshold */
5207 	WMI_VDEV_PARAM_FRAGMENTATION_THRESHOLD,
5208 	/* beacon interval in TUs */
5209 	WMI_VDEV_PARAM_BEACON_INTERVAL,
5210 	/* Listen interval in TUs */
5211 	WMI_VDEV_PARAM_LISTEN_INTERVAL,
5212 	/* multicast rate in Mbps */
5213 	WMI_VDEV_PARAM_MULTICAST_RATE,
5214 	/* management frame rate in Mbps */
5215 	WMI_VDEV_PARAM_MGMT_TX_RATE,
5216 	/* slot time (long vs short) */
5217 	WMI_VDEV_PARAM_SLOT_TIME,
5218 	/* preamble (long vs short) */
5219 	WMI_VDEV_PARAM_PREAMBLE,
5220 	/* SWBA time (time before tbtt in msec) */
5221 	WMI_VDEV_PARAM_SWBA_TIME,
5222 	/* time period for updating VDEV stats */
5223 	WMI_VDEV_STATS_UPDATE_PERIOD,
5224 	/* age out time in msec for frames queued for station in power save */
5225 	WMI_VDEV_PWRSAVE_AGEOUT_TIME,
5226 	/*
5227 	 * Host SWBA interval (time in msec before tbtt for SWBA event
5228 	 * generation).
5229 	 */
5230 	WMI_VDEV_HOST_SWBA_INTERVAL,
5231 	/* DTIM period (specified in units of num beacon intervals) */
5232 	WMI_VDEV_PARAM_DTIM_PERIOD,
5233 	/*
5234 	 * scheduler air time limit for this VDEV. used by off chan
5235 	 * scheduler.
5236 	 */
5237 	WMI_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT,
5238 	/* enable/dsiable WDS for this VDEV  */
5239 	WMI_VDEV_PARAM_WDS,
5240 	/* ATIM Window */
5241 	WMI_VDEV_PARAM_ATIM_WINDOW,
5242 	/* BMISS max */
5243 	WMI_VDEV_PARAM_BMISS_COUNT_MAX,
5244 	/* BMISS first time */
5245 	WMI_VDEV_PARAM_BMISS_FIRST_BCNT,
5246 	/* BMISS final time */
5247 	WMI_VDEV_PARAM_BMISS_FINAL_BCNT,
5248 	/* WMM enables/disabled */
5249 	WMI_VDEV_PARAM_FEATURE_WMM,
5250 	/* Channel width */
5251 	WMI_VDEV_PARAM_CHWIDTH,
5252 	/* Channel Offset */
5253 	WMI_VDEV_PARAM_CHEXTOFFSET,
5254 	/* Disable HT Protection */
5255 	WMI_VDEV_PARAM_DISABLE_HTPROTECTION,
5256 	/* Quick STA Kickout */
5257 	WMI_VDEV_PARAM_STA_QUICKKICKOUT,
5258 	/* Rate to be used with Management frames */
5259 	WMI_VDEV_PARAM_MGMT_RATE,
5260 	/* Protection Mode */
5261 	WMI_VDEV_PARAM_PROTECTION_MODE,
5262 	/* Fixed rate setting */
5263 	WMI_VDEV_PARAM_FIXED_RATE,
5264 	/* Short GI Enable/Disable */
5265 	WMI_VDEV_PARAM_SGI,
5266 	/* Enable LDPC */
5267 	WMI_VDEV_PARAM_LDPC,
5268 	/* Enable Tx STBC */
5269 	WMI_VDEV_PARAM_TX_STBC,
5270 	/* Enable Rx STBC */
5271 	WMI_VDEV_PARAM_RX_STBC,
5272 	/* Intra BSS forwarding  */
5273 	WMI_VDEV_PARAM_INTRA_BSS_FWD,
5274 	/* Setting Default xmit key for Vdev */
5275 	WMI_VDEV_PARAM_DEF_KEYID,
5276 	/* NSS width */
5277 	WMI_VDEV_PARAM_NSS,
5278 	/* Set the custom rate for the broadcast data frames */
5279 	WMI_VDEV_PARAM_BCAST_DATA_RATE,
5280 	/* Set the custom rate (rate-code) for multicast data frames */
5281 	WMI_VDEV_PARAM_MCAST_DATA_RATE,
5282 	/* Tx multicast packet indicate Enable/Disable */
5283 	WMI_VDEV_PARAM_MCAST_INDICATE,
5284 	/* Tx DHCP packet indicate Enable/Disable */
5285 	WMI_VDEV_PARAM_DHCP_INDICATE,
5286 	/* Enable host inspection of Tx unicast packet to unknown destination */
5287 	WMI_VDEV_PARAM_UNKNOWN_DEST_INDICATE,
5288 
5289 	/* The minimum amount of time AP begins to consider STA inactive */
5290 	WMI_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS,
5291 
5292 	/*
5293 	 * An associated STA is considered inactive when there is no recent
5294 	 * TX/RX activity and no downlink frames are buffered for it. Once a
5295 	 * STA exceeds the maximum idle inactive time, the AP will send an
5296 	 * 802.11 data-null as a keep alive to verify the STA is still
5297 	 * associated. If the STA does ACK the data-null, or if the data-null
5298 	 * is buffered and the STA does not retrieve it, the STA will be
5299 	 * considered unresponsive
5300 	 * (see WMI_VDEV_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS).
5301 	 */
5302 	WMI_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS,
5303 
5304 	/*
5305 	 * An associated STA is considered unresponsive if there is no recent
5306 	 * TX/RX activity and downlink frames are buffered for it. Once a STA
5307 	 * exceeds the maximum unresponsive time, the AP will send a
5308 	 * WMI_STA_KICKOUT event to the host so the STA can be deleted.
5309 	 */
5310 	WMI_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS,
5311 
5312 	/* Enable NAWDS : MCAST INSPECT Enable, NAWDS Flag set */
5313 	WMI_VDEV_PARAM_AP_ENABLE_NAWDS,
5314 	/* Enable/Disable RTS-CTS */
5315 	WMI_VDEV_PARAM_ENABLE_RTSCTS,
5316 	/* Enable TXBFee/er */
5317 	WMI_VDEV_PARAM_TXBF,
5318 
5319 	/* Set packet power save */
5320 	WMI_VDEV_PARAM_PACKET_POWERSAVE,
5321 
5322 	/*
5323 	 * Drops un-encrypted packets if eceived in an encrypted connection
5324 	 * otherwise forwards to host.
5325 	 */
5326 	WMI_VDEV_PARAM_DROP_UNENCRY,
5327 
5328 	/*
5329 	 * Set the encapsulation type for frames.
5330 	 */
5331 	WMI_VDEV_PARAM_TX_ENCAP_TYPE,
5332 };
5333 
5334 /* the definition of different VDEV parameters */
5335 enum wmi_10x_vdev_param {
5336 	/* RTS Threshold */
5337 	WMI_10X_VDEV_PARAM_RTS_THRESHOLD = 0x1,
5338 	/* Fragmentation threshold */
5339 	WMI_10X_VDEV_PARAM_FRAGMENTATION_THRESHOLD,
5340 	/* beacon interval in TUs */
5341 	WMI_10X_VDEV_PARAM_BEACON_INTERVAL,
5342 	/* Listen interval in TUs */
5343 	WMI_10X_VDEV_PARAM_LISTEN_INTERVAL,
5344 	/* multicast rate in Mbps */
5345 	WMI_10X_VDEV_PARAM_MULTICAST_RATE,
5346 	/* management frame rate in Mbps */
5347 	WMI_10X_VDEV_PARAM_MGMT_TX_RATE,
5348 	/* slot time (long vs short) */
5349 	WMI_10X_VDEV_PARAM_SLOT_TIME,
5350 	/* preamble (long vs short) */
5351 	WMI_10X_VDEV_PARAM_PREAMBLE,
5352 	/* SWBA time (time before tbtt in msec) */
5353 	WMI_10X_VDEV_PARAM_SWBA_TIME,
5354 	/* time period for updating VDEV stats */
5355 	WMI_10X_VDEV_STATS_UPDATE_PERIOD,
5356 	/* age out time in msec for frames queued for station in power save */
5357 	WMI_10X_VDEV_PWRSAVE_AGEOUT_TIME,
5358 	/*
5359 	 * Host SWBA interval (time in msec before tbtt for SWBA event
5360 	 * generation).
5361 	 */
5362 	WMI_10X_VDEV_HOST_SWBA_INTERVAL,
5363 	/* DTIM period (specified in units of num beacon intervals) */
5364 	WMI_10X_VDEV_PARAM_DTIM_PERIOD,
5365 	/*
5366 	 * scheduler air time limit for this VDEV. used by off chan
5367 	 * scheduler.
5368 	 */
5369 	WMI_10X_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT,
5370 	/* enable/dsiable WDS for this VDEV  */
5371 	WMI_10X_VDEV_PARAM_WDS,
5372 	/* ATIM Window */
5373 	WMI_10X_VDEV_PARAM_ATIM_WINDOW,
5374 	/* BMISS max */
5375 	WMI_10X_VDEV_PARAM_BMISS_COUNT_MAX,
5376 	/* WMM enables/disabled */
5377 	WMI_10X_VDEV_PARAM_FEATURE_WMM,
5378 	/* Channel width */
5379 	WMI_10X_VDEV_PARAM_CHWIDTH,
5380 	/* Channel Offset */
5381 	WMI_10X_VDEV_PARAM_CHEXTOFFSET,
5382 	/* Disable HT Protection */
5383 	WMI_10X_VDEV_PARAM_DISABLE_HTPROTECTION,
5384 	/* Quick STA Kickout */
5385 	WMI_10X_VDEV_PARAM_STA_QUICKKICKOUT,
5386 	/* Rate to be used with Management frames */
5387 	WMI_10X_VDEV_PARAM_MGMT_RATE,
5388 	/* Protection Mode */
5389 	WMI_10X_VDEV_PARAM_PROTECTION_MODE,
5390 	/* Fixed rate setting */
5391 	WMI_10X_VDEV_PARAM_FIXED_RATE,
5392 	/* Short GI Enable/Disable */
5393 	WMI_10X_VDEV_PARAM_SGI,
5394 	/* Enable LDPC */
5395 	WMI_10X_VDEV_PARAM_LDPC,
5396 	/* Enable Tx STBC */
5397 	WMI_10X_VDEV_PARAM_TX_STBC,
5398 	/* Enable Rx STBC */
5399 	WMI_10X_VDEV_PARAM_RX_STBC,
5400 	/* Intra BSS forwarding  */
5401 	WMI_10X_VDEV_PARAM_INTRA_BSS_FWD,
5402 	/* Setting Default xmit key for Vdev */
5403 	WMI_10X_VDEV_PARAM_DEF_KEYID,
5404 	/* NSS width */
5405 	WMI_10X_VDEV_PARAM_NSS,
5406 	/* Set the custom rate for the broadcast data frames */
5407 	WMI_10X_VDEV_PARAM_BCAST_DATA_RATE,
5408 	/* Set the custom rate (rate-code) for multicast data frames */
5409 	WMI_10X_VDEV_PARAM_MCAST_DATA_RATE,
5410 	/* Tx multicast packet indicate Enable/Disable */
5411 	WMI_10X_VDEV_PARAM_MCAST_INDICATE,
5412 	/* Tx DHCP packet indicate Enable/Disable */
5413 	WMI_10X_VDEV_PARAM_DHCP_INDICATE,
5414 	/* Enable host inspection of Tx unicast packet to unknown destination */
5415 	WMI_10X_VDEV_PARAM_UNKNOWN_DEST_INDICATE,
5416 
5417 	/* The minimum amount of time AP begins to consider STA inactive */
5418 	WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS,
5419 
5420 	/*
5421 	 * An associated STA is considered inactive when there is no recent
5422 	 * TX/RX activity and no downlink frames are buffered for it. Once a
5423 	 * STA exceeds the maximum idle inactive time, the AP will send an
5424 	 * 802.11 data-null as a keep alive to verify the STA is still
5425 	 * associated. If the STA does ACK the data-null, or if the data-null
5426 	 * is buffered and the STA does not retrieve it, the STA will be
5427 	 * considered unresponsive
5428 	 * (see WMI_10X_VDEV_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS).
5429 	 */
5430 	WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS,
5431 
5432 	/*
5433 	 * An associated STA is considered unresponsive if there is no recent
5434 	 * TX/RX activity and downlink frames are buffered for it. Once a STA
5435 	 * exceeds the maximum unresponsive time, the AP will send a
5436 	 * WMI_10X_STA_KICKOUT event to the host so the STA can be deleted.
5437 	 */
5438 	WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS,
5439 
5440 	/* Enable NAWDS : MCAST INSPECT Enable, NAWDS Flag set */
5441 	WMI_10X_VDEV_PARAM_AP_ENABLE_NAWDS,
5442 
5443 	WMI_10X_VDEV_PARAM_MCAST2UCAST_SET,
5444 	/* Enable/Disable RTS-CTS */
5445 	WMI_10X_VDEV_PARAM_ENABLE_RTSCTS,
5446 
5447 	WMI_10X_VDEV_PARAM_AP_DETECT_OUT_OF_SYNC_SLEEPING_STA_TIME_SECS,
5448 
5449 	/* following are available as of firmware 10.2 */
5450 	WMI_10X_VDEV_PARAM_TX_ENCAP_TYPE,
5451 	WMI_10X_VDEV_PARAM_CABQ_MAXDUR,
5452 	WMI_10X_VDEV_PARAM_MFPTEST_SET,
5453 	WMI_10X_VDEV_PARAM_RTS_FIXED_RATE,
5454 	WMI_10X_VDEV_PARAM_VHT_SGIMASK,
5455 	WMI_10X_VDEV_PARAM_VHT80_RATEMASK,
5456 	WMI_10X_VDEV_PARAM_TSF_INCREMENT,
5457 };
5458 
5459 enum wmi_10_4_vdev_param {
5460 	WMI_10_4_VDEV_PARAM_RTS_THRESHOLD = 0x1,
5461 	WMI_10_4_VDEV_PARAM_FRAGMENTATION_THRESHOLD,
5462 	WMI_10_4_VDEV_PARAM_BEACON_INTERVAL,
5463 	WMI_10_4_VDEV_PARAM_LISTEN_INTERVAL,
5464 	WMI_10_4_VDEV_PARAM_MULTICAST_RATE,
5465 	WMI_10_4_VDEV_PARAM_MGMT_TX_RATE,
5466 	WMI_10_4_VDEV_PARAM_SLOT_TIME,
5467 	WMI_10_4_VDEV_PARAM_PREAMBLE,
5468 	WMI_10_4_VDEV_PARAM_SWBA_TIME,
5469 	WMI_10_4_VDEV_STATS_UPDATE_PERIOD,
5470 	WMI_10_4_VDEV_PWRSAVE_AGEOUT_TIME,
5471 	WMI_10_4_VDEV_HOST_SWBA_INTERVAL,
5472 	WMI_10_4_VDEV_PARAM_DTIM_PERIOD,
5473 	WMI_10_4_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT,
5474 	WMI_10_4_VDEV_PARAM_WDS,
5475 	WMI_10_4_VDEV_PARAM_ATIM_WINDOW,
5476 	WMI_10_4_VDEV_PARAM_BMISS_COUNT_MAX,
5477 	WMI_10_4_VDEV_PARAM_BMISS_FIRST_BCNT,
5478 	WMI_10_4_VDEV_PARAM_BMISS_FINAL_BCNT,
5479 	WMI_10_4_VDEV_PARAM_FEATURE_WMM,
5480 	WMI_10_4_VDEV_PARAM_CHWIDTH,
5481 	WMI_10_4_VDEV_PARAM_CHEXTOFFSET,
5482 	WMI_10_4_VDEV_PARAM_DISABLE_HTPROTECTION,
5483 	WMI_10_4_VDEV_PARAM_STA_QUICKKICKOUT,
5484 	WMI_10_4_VDEV_PARAM_MGMT_RATE,
5485 	WMI_10_4_VDEV_PARAM_PROTECTION_MODE,
5486 	WMI_10_4_VDEV_PARAM_FIXED_RATE,
5487 	WMI_10_4_VDEV_PARAM_SGI,
5488 	WMI_10_4_VDEV_PARAM_LDPC,
5489 	WMI_10_4_VDEV_PARAM_TX_STBC,
5490 	WMI_10_4_VDEV_PARAM_RX_STBC,
5491 	WMI_10_4_VDEV_PARAM_INTRA_BSS_FWD,
5492 	WMI_10_4_VDEV_PARAM_DEF_KEYID,
5493 	WMI_10_4_VDEV_PARAM_NSS,
5494 	WMI_10_4_VDEV_PARAM_BCAST_DATA_RATE,
5495 	WMI_10_4_VDEV_PARAM_MCAST_DATA_RATE,
5496 	WMI_10_4_VDEV_PARAM_MCAST_INDICATE,
5497 	WMI_10_4_VDEV_PARAM_DHCP_INDICATE,
5498 	WMI_10_4_VDEV_PARAM_UNKNOWN_DEST_INDICATE,
5499 	WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS,
5500 	WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS,
5501 	WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS,
5502 	WMI_10_4_VDEV_PARAM_AP_ENABLE_NAWDS,
5503 	WMI_10_4_VDEV_PARAM_MCAST2UCAST_SET,
5504 	WMI_10_4_VDEV_PARAM_ENABLE_RTSCTS,
5505 	WMI_10_4_VDEV_PARAM_RC_NUM_RETRIES,
5506 	WMI_10_4_VDEV_PARAM_TXBF,
5507 	WMI_10_4_VDEV_PARAM_PACKET_POWERSAVE,
5508 	WMI_10_4_VDEV_PARAM_DROP_UNENCRY,
5509 	WMI_10_4_VDEV_PARAM_TX_ENCAP_TYPE,
5510 	WMI_10_4_VDEV_PARAM_AP_DETECT_OUT_OF_SYNC_SLEEPING_STA_TIME_SECS,
5511 	WMI_10_4_VDEV_PARAM_CABQ_MAXDUR,
5512 	WMI_10_4_VDEV_PARAM_MFPTEST_SET,
5513 	WMI_10_4_VDEV_PARAM_RTS_FIXED_RATE,
5514 	WMI_10_4_VDEV_PARAM_VHT_SGIMASK,
5515 	WMI_10_4_VDEV_PARAM_VHT80_RATEMASK,
5516 	WMI_10_4_VDEV_PARAM_EARLY_RX_ADJUST_ENABLE,
5517 	WMI_10_4_VDEV_PARAM_EARLY_RX_TGT_BMISS_NUM,
5518 	WMI_10_4_VDEV_PARAM_EARLY_RX_BMISS_SAMPLE_CYCLE,
5519 	WMI_10_4_VDEV_PARAM_EARLY_RX_SLOP_STEP,
5520 	WMI_10_4_VDEV_PARAM_EARLY_RX_INIT_SLOP,
5521 	WMI_10_4_VDEV_PARAM_EARLY_RX_ADJUST_PAUSE,
5522 	WMI_10_4_VDEV_PARAM_PROXY_STA,
5523 	WMI_10_4_VDEV_PARAM_MERU_VC,
5524 	WMI_10_4_VDEV_PARAM_RX_DECAP_TYPE,
5525 	WMI_10_4_VDEV_PARAM_BW_NSS_RATEMASK,
5526 	WMI_10_4_VDEV_PARAM_SENSOR_AP,
5527 	WMI_10_4_VDEV_PARAM_BEACON_RATE,
5528 	WMI_10_4_VDEV_PARAM_DTIM_ENABLE_CTS,
5529 	WMI_10_4_VDEV_PARAM_STA_KICKOUT,
5530 	WMI_10_4_VDEV_PARAM_CAPABILITIES,
5531 	WMI_10_4_VDEV_PARAM_TSF_INCREMENT,
5532 	WMI_10_4_VDEV_PARAM_RX_FILTER,
5533 	WMI_10_4_VDEV_PARAM_MGMT_TX_POWER,
5534 	WMI_10_4_VDEV_PARAM_ATF_SSID_SCHED_POLICY,
5535 	WMI_10_4_VDEV_PARAM_DISABLE_DYN_BW_RTS,
5536 	WMI_10_4_VDEV_PARAM_TSF_DECREMENT,
5537 	WMI_10_4_VDEV_PARAM_SELFGEN_FIXED_RATE,
5538 	WMI_10_4_VDEV_PARAM_AMPDU_SUBFRAME_SIZE_PER_AC,
5539 	WMI_10_4_VDEV_PARAM_NSS_VHT160,
5540 	WMI_10_4_VDEV_PARAM_NSS_VHT80_80,
5541 	WMI_10_4_VDEV_PARAM_AMSDU_SUBFRAME_SIZE_PER_AC,
5542 	WMI_10_4_VDEV_PARAM_DISABLE_CABQ,
5543 	WMI_10_4_VDEV_PARAM_SIFS_TRIGGER_RATE,
5544 	WMI_10_4_VDEV_PARAM_TX_POWER,
5545 	WMI_10_4_VDEV_PARAM_ENABLE_DISABLE_RTT_RESPONDER_ROLE,
5546 	WMI_10_4_VDEV_PARAM_DISABLE_4_ADDR_SRC_LRN,
5547 };
5548 
5549 #define WMI_VDEV_DISABLE_4_ADDR_SRC_LRN 1
5550 
5551 #define WMI_VDEV_PARAM_TXBF_SU_TX_BFEE BIT(0)
5552 #define WMI_VDEV_PARAM_TXBF_MU_TX_BFEE BIT(1)
5553 #define WMI_VDEV_PARAM_TXBF_SU_TX_BFER BIT(2)
5554 #define WMI_VDEV_PARAM_TXBF_MU_TX_BFER BIT(3)
5555 
5556 #define WMI_TXBF_STS_CAP_OFFSET_LSB	4
5557 #define WMI_TXBF_STS_CAP_OFFSET_MASK	0x70
5558 #define WMI_TXBF_CONF_IMPLICIT_BF       BIT(7)
5559 #define WMI_BF_SOUND_DIM_OFFSET_LSB	8
5560 #define WMI_BF_SOUND_DIM_OFFSET_MASK	0xf00
5561 
5562 /* slot time long */
5563 #define WMI_VDEV_SLOT_TIME_LONG		0x1
5564 /* slot time short */
5565 #define WMI_VDEV_SLOT_TIME_SHORT	0x2
5566 /* preablbe long */
5567 #define WMI_VDEV_PREAMBLE_LONG		0x1
5568 /* preablbe short */
5569 #define WMI_VDEV_PREAMBLE_SHORT		0x2
5570 
5571 enum wmi_start_event_param {
5572 	WMI_VDEV_RESP_START_EVENT = 0,
5573 	WMI_VDEV_RESP_RESTART_EVENT,
5574 };
5575 
5576 struct wmi_vdev_start_response_event {
5577 	__le32 vdev_id;
5578 	__le32 req_id;
5579 	__le32 resp_type; /* %WMI_VDEV_RESP_ */
5580 	__le32 status;
5581 } __packed;
5582 
5583 struct wmi_vdev_standby_req_event {
5584 	/* unique id identifying the VDEV, generated by the caller */
5585 	__le32 vdev_id;
5586 } __packed;
5587 
5588 struct wmi_vdev_resume_req_event {
5589 	/* unique id identifying the VDEV, generated by the caller */
5590 	__le32 vdev_id;
5591 } __packed;
5592 
5593 struct wmi_vdev_stopped_event {
5594 	/* unique id identifying the VDEV, generated by the caller */
5595 	__le32 vdev_id;
5596 } __packed;
5597 
5598 /*
5599  * common structure used for simple events
5600  * (stopped, resume_req, standby response)
5601  */
5602 struct wmi_vdev_simple_event {
5603 	/* unique id identifying the VDEV, generated by the caller */
5604 	__le32 vdev_id;
5605 } __packed;
5606 
5607 /* VDEV start response status codes */
5608 /* VDEV successfully started */
5609 #define WMI_INIFIED_VDEV_START_RESPONSE_STATUS_SUCCESS	0x0
5610 
5611 /* requested VDEV not found */
5612 #define WMI_INIFIED_VDEV_START_RESPONSE_INVALID_VDEVID	0x1
5613 
5614 /* unsupported VDEV combination */
5615 #define WMI_INIFIED_VDEV_START_RESPONSE_NOT_SUPPORTED	0x2
5616 
5617 /* TODO: please add more comments if you have in-depth information */
5618 struct wmi_vdev_spectral_conf_cmd {
5619 	__le32 vdev_id;
5620 
5621 	/* number of fft samples to send (0 for infinite) */
5622 	__le32 scan_count;
5623 	__le32 scan_period;
5624 	__le32 scan_priority;
5625 
5626 	/* number of bins in the FFT: 2^(fft_size - bin_scale) */
5627 	__le32 scan_fft_size;
5628 	__le32 scan_gc_ena;
5629 	__le32 scan_restart_ena;
5630 	__le32 scan_noise_floor_ref;
5631 	__le32 scan_init_delay;
5632 	__le32 scan_nb_tone_thr;
5633 	__le32 scan_str_bin_thr;
5634 	__le32 scan_wb_rpt_mode;
5635 	__le32 scan_rssi_rpt_mode;
5636 	__le32 scan_rssi_thr;
5637 	__le32 scan_pwr_format;
5638 
5639 	/* rpt_mode: Format of FFT report to software for spectral scan
5640 	 * triggered FFTs:
5641 	 *	0: No FFT report (only spectral scan summary report)
5642 	 *	1: 2-dword summary of metrics for each completed FFT + spectral
5643 	 *	   scan	summary report
5644 	 *	2: 2-dword summary of metrics for each completed FFT +
5645 	 *	   1x- oversampled bins(in-band) per FFT + spectral scan summary
5646 	 *	   report
5647 	 *	3: 2-dword summary of metrics for each completed FFT +
5648 	 *	   2x- oversampled bins	(all) per FFT + spectral scan summary
5649 	 */
5650 	__le32 scan_rpt_mode;
5651 	__le32 scan_bin_scale;
5652 	__le32 scan_dbm_adj;
5653 	__le32 scan_chn_mask;
5654 } __packed;
5655 
5656 struct wmi_vdev_spectral_conf_arg {
5657 	u32 vdev_id;
5658 	u32 scan_count;
5659 	u32 scan_period;
5660 	u32 scan_priority;
5661 	u32 scan_fft_size;
5662 	u32 scan_gc_ena;
5663 	u32 scan_restart_ena;
5664 	u32 scan_noise_floor_ref;
5665 	u32 scan_init_delay;
5666 	u32 scan_nb_tone_thr;
5667 	u32 scan_str_bin_thr;
5668 	u32 scan_wb_rpt_mode;
5669 	u32 scan_rssi_rpt_mode;
5670 	u32 scan_rssi_thr;
5671 	u32 scan_pwr_format;
5672 	u32 scan_rpt_mode;
5673 	u32 scan_bin_scale;
5674 	u32 scan_dbm_adj;
5675 	u32 scan_chn_mask;
5676 };
5677 
5678 #define WMI_SPECTRAL_ENABLE_DEFAULT              0
5679 #define WMI_SPECTRAL_COUNT_DEFAULT               0
5680 #define WMI_SPECTRAL_PERIOD_DEFAULT             35
5681 #define WMI_SPECTRAL_PRIORITY_DEFAULT            1
5682 #define WMI_SPECTRAL_FFT_SIZE_DEFAULT            7
5683 #define WMI_SPECTRAL_GC_ENA_DEFAULT              1
5684 #define WMI_SPECTRAL_RESTART_ENA_DEFAULT         0
5685 #define WMI_SPECTRAL_NOISE_FLOOR_REF_DEFAULT   -96
5686 #define WMI_SPECTRAL_INIT_DELAY_DEFAULT         80
5687 #define WMI_SPECTRAL_NB_TONE_THR_DEFAULT        12
5688 #define WMI_SPECTRAL_STR_BIN_THR_DEFAULT         8
5689 #define WMI_SPECTRAL_WB_RPT_MODE_DEFAULT         0
5690 #define WMI_SPECTRAL_RSSI_RPT_MODE_DEFAULT       0
5691 #define WMI_SPECTRAL_RSSI_THR_DEFAULT         0xf0
5692 #define WMI_SPECTRAL_PWR_FORMAT_DEFAULT          0
5693 #define WMI_SPECTRAL_RPT_MODE_DEFAULT            2
5694 #define WMI_SPECTRAL_BIN_SCALE_DEFAULT           1
5695 #define WMI_SPECTRAL_DBM_ADJ_DEFAULT             1
5696 #define WMI_SPECTRAL_CHN_MASK_DEFAULT            1
5697 
5698 struct wmi_vdev_spectral_enable_cmd {
5699 	__le32 vdev_id;
5700 	__le32 trigger_cmd;
5701 	__le32 enable_cmd;
5702 } __packed;
5703 
5704 #define WMI_SPECTRAL_TRIGGER_CMD_TRIGGER  1
5705 #define WMI_SPECTRAL_TRIGGER_CMD_CLEAR    2
5706 #define WMI_SPECTRAL_ENABLE_CMD_ENABLE    1
5707 #define WMI_SPECTRAL_ENABLE_CMD_DISABLE   2
5708 
5709 /* Beacon processing related command and event structures */
5710 struct wmi_bcn_tx_hdr {
5711 	__le32 vdev_id;
5712 	__le32 tx_rate;
5713 	__le32 tx_power;
5714 	__le32 bcn_len;
5715 } __packed;
5716 
5717 struct wmi_bcn_tx_cmd {
5718 	struct wmi_bcn_tx_hdr hdr;
5719 	u8 *bcn[];
5720 } __packed;
5721 
5722 struct wmi_bcn_tx_arg {
5723 	u32 vdev_id;
5724 	u32 tx_rate;
5725 	u32 tx_power;
5726 	u32 bcn_len;
5727 	const void *bcn;
5728 };
5729 
5730 enum wmi_bcn_tx_ref_flags {
5731 	WMI_BCN_TX_REF_FLAG_DTIM_ZERO = 0x1,
5732 	WMI_BCN_TX_REF_FLAG_DELIVER_CAB = 0x2,
5733 };
5734 
5735 /* TODO: It is unclear why "no antenna" works while any other seemingly valid
5736  * chainmask yields no beacons on the air at all.
5737  */
5738 #define WMI_BCN_TX_REF_DEF_ANTENNA 0
5739 
5740 struct wmi_bcn_tx_ref_cmd {
5741 	__le32 vdev_id;
5742 	__le32 data_len;
5743 	/* physical address of the frame - dma pointer */
5744 	__le32 data_ptr;
5745 	/* id for host to track */
5746 	__le32 msdu_id;
5747 	/* frame ctrl to setup PPDU desc */
5748 	__le32 frame_control;
5749 	/* to control CABQ traffic: WMI_BCN_TX_REF_FLAG_ */
5750 	__le32 flags;
5751 	/* introduced in 10.2 */
5752 	__le32 antenna_mask;
5753 } __packed;
5754 
5755 /* Beacon filter */
5756 #define WMI_BCN_FILTER_ALL   0 /* Filter all beacons */
5757 #define WMI_BCN_FILTER_NONE  1 /* Pass all beacons */
5758 #define WMI_BCN_FILTER_RSSI  2 /* Pass Beacons RSSI >= RSSI threshold */
5759 #define WMI_BCN_FILTER_BSSID 3 /* Pass Beacons with matching BSSID */
5760 #define WMI_BCN_FILTER_SSID  4 /* Pass Beacons with matching SSID */
5761 
5762 struct wmi_bcn_filter_rx_cmd {
5763 	/* Filter ID */
5764 	__le32 bcn_filter_id;
5765 	/* Filter type - wmi_bcn_filter */
5766 	__le32 bcn_filter;
5767 	/* Buffer len */
5768 	__le32 bcn_filter_len;
5769 	/* Filter info (threshold, BSSID, RSSI) */
5770 	u8 *bcn_filter_buf;
5771 } __packed;
5772 
5773 /* Capabilities and IEs to be passed to firmware */
5774 struct wmi_bcn_prb_info {
5775 	/* Capabilities */
5776 	__le32 caps;
5777 	/* ERP info */
5778 	__le32 erp;
5779 	/* Advanced capabilities */
5780 	/* HT capabilities */
5781 	/* HT Info */
5782 	/* ibss_dfs */
5783 	/* wpa Info */
5784 	/* rsn Info */
5785 	/* rrm info */
5786 	/* ath_ext */
5787 	/* app IE */
5788 } __packed;
5789 
5790 struct wmi_bcn_tmpl_cmd {
5791 	/* unique id identifying the VDEV, generated by the caller */
5792 	__le32 vdev_id;
5793 	/* TIM IE offset from the beginning of the template. */
5794 	__le32 tim_ie_offset;
5795 	/* beacon probe capabilities and IEs */
5796 	struct wmi_bcn_prb_info bcn_prb_info;
5797 	/* beacon buffer length */
5798 	__le32 buf_len;
5799 	/* variable length data */
5800 	u8 data[1];
5801 } __packed;
5802 
5803 struct wmi_prb_tmpl_cmd {
5804 	/* unique id identifying the VDEV, generated by the caller */
5805 	__le32 vdev_id;
5806 	/* beacon probe capabilities and IEs */
5807 	struct wmi_bcn_prb_info bcn_prb_info;
5808 	/* beacon buffer length */
5809 	__le32 buf_len;
5810 	/* Variable length data */
5811 	u8 data[1];
5812 } __packed;
5813 
5814 enum wmi_sta_ps_mode {
5815 	/* enable power save for the given STA VDEV */
5816 	WMI_STA_PS_MODE_DISABLED = 0,
5817 	/* disable power save  for a given STA VDEV */
5818 	WMI_STA_PS_MODE_ENABLED = 1,
5819 };
5820 
5821 struct wmi_sta_powersave_mode_cmd {
5822 	/* unique id identifying the VDEV, generated by the caller */
5823 	__le32 vdev_id;
5824 
5825 	/*
5826 	 * Power save mode
5827 	 * (see enum wmi_sta_ps_mode)
5828 	 */
5829 	__le32 sta_ps_mode;
5830 } __packed;
5831 
5832 enum wmi_csa_offload_en {
5833 	WMI_CSA_OFFLOAD_DISABLE = 0,
5834 	WMI_CSA_OFFLOAD_ENABLE = 1,
5835 };
5836 
5837 struct wmi_csa_offload_enable_cmd {
5838 	__le32 vdev_id;
5839 	__le32 csa_offload_enable;
5840 } __packed;
5841 
5842 struct wmi_csa_offload_chanswitch_cmd {
5843 	__le32 vdev_id;
5844 	struct wmi_channel chan;
5845 } __packed;
5846 
5847 /*
5848  * This parameter controls the policy for retrieving frames from AP while the
5849  * STA is in sleep state.
5850  *
5851  * Only takes affect if the sta_ps_mode is enabled
5852  */
5853 enum wmi_sta_ps_param_rx_wake_policy {
5854 	/*
5855 	 * Wake up when ever there is an  RX activity on the VDEV. In this mode
5856 	 * the Power save SM(state machine) will come out of sleep by either
5857 	 * sending null frame (or) a data frame (with PS==0) in response to TIM
5858 	 * bit set in the received beacon frame from AP.
5859 	 */
5860 	WMI_STA_PS_RX_WAKE_POLICY_WAKE = 0,
5861 
5862 	/*
5863 	 * Here the power save state machine will not wakeup in response to TIM
5864 	 * bit, instead it will send a PSPOLL (or) UASPD trigger based on UAPSD
5865 	 * configuration setup by WMISET_PS_SET_UAPSD  WMI command.  When all
5866 	 * access categories are delivery-enabled, the station will send a
5867 	 * UAPSD trigger frame, otherwise it will send a PS-Poll.
5868 	 */
5869 	WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD = 1,
5870 };
5871 
5872 /*
5873  * Number of tx frames/beacon  that cause the power save SM to wake up.
5874  *
5875  * Value 1 causes the SM to wake up for every TX. Value 0 has a special
5876  * meaning, It will cause the SM to never wake up. This is useful if you want
5877  * to keep the system to sleep all the time for some kind of test mode . host
5878  * can change this parameter any time.  It will affect at the next tx frame.
5879  */
5880 enum wmi_sta_ps_param_tx_wake_threshold {
5881 	WMI_STA_PS_TX_WAKE_THRESHOLD_NEVER = 0,
5882 	WMI_STA_PS_TX_WAKE_THRESHOLD_ALWAYS = 1,
5883 
5884 	/*
5885 	 * Values greater than one indicate that many TX attempts per beacon
5886 	 * interval before the STA will wake up
5887 	 */
5888 };
5889 
5890 /*
5891  * The maximum number of PS-Poll frames the FW will send in response to
5892  * traffic advertised in TIM before waking up (by sending a null frame with PS
5893  * = 0). Value 0 has a special meaning: there is no maximum count and the FW
5894  * will send as many PS-Poll as are necessary to retrieve buffered BU. This
5895  * parameter is used when the RX wake policy is
5896  * WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD and ignored when the RX wake
5897  * policy is WMI_STA_PS_RX_WAKE_POLICY_WAKE.
5898  */
5899 enum wmi_sta_ps_param_pspoll_count {
5900 	WMI_STA_PS_PSPOLL_COUNT_NO_MAX = 0,
5901 	/*
5902 	 * Values greater than 0 indicate the maximum numer of PS-Poll frames
5903 	 * FW will send before waking up.
5904 	 */
5905 
5906 	/* When u-APSD is enabled the firmware will be very reluctant to exit
5907 	 * STA PS. This could result in very poor Rx performance with STA doing
5908 	 * PS-Poll for each and every buffered frame. This value is a bit
5909 	 * arbitrary.
5910 	 */
5911 	WMI_STA_PS_PSPOLL_COUNT_UAPSD = 3,
5912 };
5913 
5914 /*
5915  * This will include the delivery and trigger enabled state for every AC.
5916  * This is the negotiated state with AP. The host MLME needs to set this based
5917  * on AP capability and the state Set in the association request by the
5918  * station MLME.Lower 8 bits of the value specify the UAPSD configuration.
5919  */
5920 #define WMI_UAPSD_AC_TYPE_DELI 0
5921 #define WMI_UAPSD_AC_TYPE_TRIG 1
5922 
5923 #define WMI_UAPSD_AC_BIT_MASK(ac, type) \
5924 	(type == WMI_UAPSD_AC_TYPE_DELI ? 1 << (ac << 1) : 1 << ((ac << 1) + 1))
5925 
5926 enum wmi_sta_ps_param_uapsd {
5927 	WMI_STA_PS_UAPSD_AC0_DELIVERY_EN = (1 << 0),
5928 	WMI_STA_PS_UAPSD_AC0_TRIGGER_EN  = (1 << 1),
5929 	WMI_STA_PS_UAPSD_AC1_DELIVERY_EN = (1 << 2),
5930 	WMI_STA_PS_UAPSD_AC1_TRIGGER_EN  = (1 << 3),
5931 	WMI_STA_PS_UAPSD_AC2_DELIVERY_EN = (1 << 4),
5932 	WMI_STA_PS_UAPSD_AC2_TRIGGER_EN  = (1 << 5),
5933 	WMI_STA_PS_UAPSD_AC3_DELIVERY_EN = (1 << 6),
5934 	WMI_STA_PS_UAPSD_AC3_TRIGGER_EN  = (1 << 7),
5935 };
5936 
5937 #define WMI_STA_UAPSD_MAX_INTERVAL_MSEC UINT_MAX
5938 
5939 struct wmi_sta_uapsd_auto_trig_param {
5940 	__le32 wmm_ac;
5941 	__le32 user_priority;
5942 	__le32 service_interval;
5943 	__le32 suspend_interval;
5944 	__le32 delay_interval;
5945 };
5946 
5947 struct wmi_sta_uapsd_auto_trig_cmd_fixed_param {
5948 	__le32 vdev_id;
5949 	struct wmi_mac_addr peer_macaddr;
5950 	__le32 num_ac;
5951 };
5952 
5953 struct wmi_sta_uapsd_auto_trig_arg {
5954 	u32 wmm_ac;
5955 	u32 user_priority;
5956 	u32 service_interval;
5957 	u32 suspend_interval;
5958 	u32 delay_interval;
5959 };
5960 
5961 enum wmi_sta_powersave_param {
5962 	/*
5963 	 * Controls how frames are retrievd from AP while STA is sleeping
5964 	 *
5965 	 * (see enum wmi_sta_ps_param_rx_wake_policy)
5966 	 */
5967 	WMI_STA_PS_PARAM_RX_WAKE_POLICY = 0,
5968 
5969 	/*
5970 	 * The STA will go active after this many TX
5971 	 *
5972 	 * (see enum wmi_sta_ps_param_tx_wake_threshold)
5973 	 */
5974 	WMI_STA_PS_PARAM_TX_WAKE_THRESHOLD = 1,
5975 
5976 	/*
5977 	 * Number of PS-Poll to send before STA wakes up
5978 	 *
5979 	 * (see enum wmi_sta_ps_param_pspoll_count)
5980 	 *
5981 	 */
5982 	WMI_STA_PS_PARAM_PSPOLL_COUNT = 2,
5983 
5984 	/*
5985 	 * TX/RX inactivity time in msec before going to sleep.
5986 	 *
5987 	 * The power save SM will monitor tx/rx activity on the VDEV, if no
5988 	 * activity for the specified msec of the parameter the Power save
5989 	 * SM will go to sleep.
5990 	 */
5991 	WMI_STA_PS_PARAM_INACTIVITY_TIME = 3,
5992 
5993 	/*
5994 	 * Set uapsd configuration.
5995 	 *
5996 	 * (see enum wmi_sta_ps_param_uapsd)
5997 	 */
5998 	WMI_STA_PS_PARAM_UAPSD = 4,
5999 };
6000 
6001 struct wmi_sta_powersave_param_cmd {
6002 	__le32 vdev_id;
6003 	__le32 param_id; /* %WMI_STA_PS_PARAM_ */
6004 	__le32 param_value;
6005 } __packed;
6006 
6007 /* No MIMO power save */
6008 #define WMI_STA_MIMO_PS_MODE_DISABLE
6009 /* mimo powersave mode static*/
6010 #define WMI_STA_MIMO_PS_MODE_STATIC
6011 /* mimo powersave mode dynamic */
6012 #define WMI_STA_MIMO_PS_MODE_DYNAMIC
6013 
6014 struct wmi_sta_mimo_ps_mode_cmd {
6015 	/* unique id identifying the VDEV, generated by the caller */
6016 	__le32 vdev_id;
6017 	/* mimo powersave mode as defined above */
6018 	__le32 mimo_pwrsave_mode;
6019 } __packed;
6020 
6021 /* U-APSD configuration of peer station from (re)assoc request and TSPECs */
6022 enum wmi_ap_ps_param_uapsd {
6023 	WMI_AP_PS_UAPSD_AC0_DELIVERY_EN = (1 << 0),
6024 	WMI_AP_PS_UAPSD_AC0_TRIGGER_EN  = (1 << 1),
6025 	WMI_AP_PS_UAPSD_AC1_DELIVERY_EN = (1 << 2),
6026 	WMI_AP_PS_UAPSD_AC1_TRIGGER_EN  = (1 << 3),
6027 	WMI_AP_PS_UAPSD_AC2_DELIVERY_EN = (1 << 4),
6028 	WMI_AP_PS_UAPSD_AC2_TRIGGER_EN  = (1 << 5),
6029 	WMI_AP_PS_UAPSD_AC3_DELIVERY_EN = (1 << 6),
6030 	WMI_AP_PS_UAPSD_AC3_TRIGGER_EN  = (1 << 7),
6031 };
6032 
6033 /* U-APSD maximum service period of peer station */
6034 enum wmi_ap_ps_peer_param_max_sp {
6035 	WMI_AP_PS_PEER_PARAM_MAX_SP_UNLIMITED = 0,
6036 	WMI_AP_PS_PEER_PARAM_MAX_SP_2 = 1,
6037 	WMI_AP_PS_PEER_PARAM_MAX_SP_4 = 2,
6038 	WMI_AP_PS_PEER_PARAM_MAX_SP_6 = 3,
6039 	MAX_WMI_AP_PS_PEER_PARAM_MAX_SP,
6040 };
6041 
6042 /*
6043  * AP power save parameter
6044  * Set a power save specific parameter for a peer station
6045  */
6046 enum wmi_ap_ps_peer_param {
6047 	/* Set uapsd configuration for a given peer.
6048 	 *
6049 	 * Include the delivery and trigger enabled state for every AC.
6050 	 * The host  MLME needs to set this based on AP capability and stations
6051 	 * request Set in the association request  received from the station.
6052 	 *
6053 	 * Lower 8 bits of the value specify the UAPSD configuration.
6054 	 *
6055 	 * (see enum wmi_ap_ps_param_uapsd)
6056 	 * The default value is 0.
6057 	 */
6058 	WMI_AP_PS_PEER_PARAM_UAPSD = 0,
6059 
6060 	/*
6061 	 * Set the service period for a UAPSD capable station
6062 	 *
6063 	 * The service period from wme ie in the (re)assoc request frame.
6064 	 *
6065 	 * (see enum wmi_ap_ps_peer_param_max_sp)
6066 	 */
6067 	WMI_AP_PS_PEER_PARAM_MAX_SP = 1,
6068 
6069 	/* Time in seconds for aging out buffered frames for STA in PS */
6070 	WMI_AP_PS_PEER_PARAM_AGEOUT_TIME = 2,
6071 };
6072 
6073 struct wmi_ap_ps_peer_cmd {
6074 	/* unique id identifying the VDEV, generated by the caller */
6075 	__le32 vdev_id;
6076 
6077 	/* peer MAC address */
6078 	struct wmi_mac_addr peer_macaddr;
6079 
6080 	/* AP powersave param (see enum wmi_ap_ps_peer_param) */
6081 	__le32 param_id;
6082 
6083 	/* AP powersave param value */
6084 	__le32 param_value;
6085 } __packed;
6086 
6087 /* 128 clients = 4 words */
6088 #define WMI_TIM_BITMAP_ARRAY_SIZE 4
6089 
6090 struct wmi_tim_info {
6091 	__le32 tim_len;
6092 	__le32 tim_mcast;
6093 	__le32 tim_bitmap[WMI_TIM_BITMAP_ARRAY_SIZE];
6094 	__le32 tim_changed;
6095 	__le32 tim_num_ps_pending;
6096 } __packed;
6097 
6098 struct wmi_tim_info_arg {
6099 	__le32 tim_len;
6100 	__le32 tim_mcast;
6101 	const __le32 *tim_bitmap;
6102 	__le32 tim_changed;
6103 	__le32 tim_num_ps_pending;
6104 } __packed;
6105 
6106 /* Maximum number of NOA Descriptors supported */
6107 #define WMI_P2P_MAX_NOA_DESCRIPTORS 4
6108 #define WMI_P2P_OPPPS_ENABLE_BIT	BIT(0)
6109 #define WMI_P2P_OPPPS_CTWINDOW_OFFSET	1
6110 #define WMI_P2P_NOA_CHANGED_BIT	BIT(0)
6111 
6112 struct wmi_p2p_noa_info {
6113 	/* Bit 0 - Flag to indicate an update in NOA schedule
6114 	 * Bits 7-1 - Reserved
6115 	 */
6116 	u8 changed;
6117 	/* NOA index */
6118 	u8 index;
6119 	/* Bit 0 - Opp PS state of the AP
6120 	 * Bits 1-7 - Ctwindow in TUs
6121 	 */
6122 	u8 ctwindow_oppps;
6123 	/* Number of NOA descriptors */
6124 	u8 num_descriptors;
6125 
6126 	struct wmi_p2p_noa_descriptor descriptors[WMI_P2P_MAX_NOA_DESCRIPTORS];
6127 } __packed;
6128 
6129 struct wmi_bcn_info {
6130 	struct wmi_tim_info tim_info;
6131 	struct wmi_p2p_noa_info p2p_noa_info;
6132 } __packed;
6133 
6134 struct wmi_host_swba_event {
6135 	__le32 vdev_map;
6136 	struct wmi_bcn_info bcn_info[];
6137 } __packed;
6138 
6139 struct wmi_10_2_4_bcn_info {
6140 	struct wmi_tim_info tim_info;
6141 	/* The 10.2.4 FW doesn't have p2p NOA info */
6142 } __packed;
6143 
6144 struct wmi_10_2_4_host_swba_event {
6145 	__le32 vdev_map;
6146 	struct wmi_10_2_4_bcn_info bcn_info[];
6147 } __packed;
6148 
6149 /* 16 words = 512 client + 1 word = for guard */
6150 #define WMI_10_4_TIM_BITMAP_ARRAY_SIZE 17
6151 
6152 struct wmi_10_4_tim_info {
6153 	__le32 tim_len;
6154 	__le32 tim_mcast;
6155 	__le32 tim_bitmap[WMI_10_4_TIM_BITMAP_ARRAY_SIZE];
6156 	__le32 tim_changed;
6157 	__le32 tim_num_ps_pending;
6158 } __packed;
6159 
6160 #define WMI_10_4_P2P_MAX_NOA_DESCRIPTORS 1
6161 
6162 struct wmi_10_4_p2p_noa_info {
6163 	/* Bit 0 - Flag to indicate an update in NOA schedule
6164 	 * Bits 7-1 - Reserved
6165 	 */
6166 	u8 changed;
6167 	/* NOA index */
6168 	u8 index;
6169 	/* Bit 0 - Opp PS state of the AP
6170 	 * Bits 1-7 - Ctwindow in TUs
6171 	 */
6172 	u8 ctwindow_oppps;
6173 	/* Number of NOA descriptors */
6174 	u8 num_descriptors;
6175 
6176 	struct wmi_p2p_noa_descriptor
6177 		noa_descriptors[WMI_10_4_P2P_MAX_NOA_DESCRIPTORS];
6178 } __packed;
6179 
6180 struct wmi_10_4_bcn_info {
6181 	struct wmi_10_4_tim_info tim_info;
6182 	struct wmi_10_4_p2p_noa_info p2p_noa_info;
6183 } __packed;
6184 
6185 struct wmi_10_4_host_swba_event {
6186 	__le32 vdev_map;
6187 	struct wmi_10_4_bcn_info bcn_info[];
6188 } __packed;
6189 
6190 #define WMI_MAX_AP_VDEV 16
6191 
6192 struct wmi_tbtt_offset_event {
6193 	__le32 vdev_map;
6194 	__le32 tbttoffset_list[WMI_MAX_AP_VDEV];
6195 } __packed;
6196 
6197 struct wmi_peer_create_cmd {
6198 	__le32 vdev_id;
6199 	struct wmi_mac_addr peer_macaddr;
6200 	__le32 peer_type;
6201 } __packed;
6202 
6203 enum wmi_peer_type {
6204 	WMI_PEER_TYPE_DEFAULT = 0,
6205 	WMI_PEER_TYPE_BSS = 1,
6206 	WMI_PEER_TYPE_TDLS = 2,
6207 };
6208 
6209 struct wmi_peer_delete_cmd {
6210 	__le32 vdev_id;
6211 	struct wmi_mac_addr peer_macaddr;
6212 } __packed;
6213 
6214 struct wmi_peer_flush_tids_cmd {
6215 	__le32 vdev_id;
6216 	struct wmi_mac_addr peer_macaddr;
6217 	__le32 peer_tid_bitmap;
6218 } __packed;
6219 
6220 struct wmi_fixed_rate {
6221 	/*
6222 	 * rate mode . 0: disable fixed rate (auto rate)
6223 	 *   1: legacy (non 11n) rate  specified as ieee rate 2*Mbps
6224 	 *   2: ht20 11n rate  specified as mcs index
6225 	 *   3: ht40 11n rate  specified as mcs index
6226 	 */
6227 	__le32  rate_mode;
6228 	/*
6229 	 * 4 rate values for 4 rate series. series 0 is stored in byte 0 (LSB)
6230 	 * and series 3 is stored at byte 3 (MSB)
6231 	 */
6232 	__le32  rate_series;
6233 	/*
6234 	 * 4 retry counts for 4 rate series. retry count for rate 0 is stored
6235 	 * in byte 0 (LSB) and retry count for rate 3 is stored at byte 3
6236 	 * (MSB)
6237 	 */
6238 	__le32  rate_retries;
6239 } __packed;
6240 
6241 struct wmi_peer_fixed_rate_cmd {
6242 	/* unique id identifying the VDEV, generated by the caller */
6243 	__le32 vdev_id;
6244 	/* peer MAC address */
6245 	struct wmi_mac_addr peer_macaddr;
6246 	/* fixed rate */
6247 	struct wmi_fixed_rate peer_fixed_rate;
6248 } __packed;
6249 
6250 #define WMI_MGMT_TID    17
6251 
6252 struct wmi_addba_clear_resp_cmd {
6253 	/* unique id identifying the VDEV, generated by the caller */
6254 	__le32 vdev_id;
6255 	/* peer MAC address */
6256 	struct wmi_mac_addr peer_macaddr;
6257 } __packed;
6258 
6259 struct wmi_addba_send_cmd {
6260 	/* unique id identifying the VDEV, generated by the caller */
6261 	__le32 vdev_id;
6262 	/* peer MAC address */
6263 	struct wmi_mac_addr peer_macaddr;
6264 	/* Tid number */
6265 	__le32 tid;
6266 	/* Buffer/Window size*/
6267 	__le32 buffersize;
6268 } __packed;
6269 
6270 struct wmi_delba_send_cmd {
6271 	/* unique id identifying the VDEV, generated by the caller */
6272 	__le32 vdev_id;
6273 	/* peer MAC address */
6274 	struct wmi_mac_addr peer_macaddr;
6275 	/* Tid number */
6276 	__le32 tid;
6277 	/* Is Initiator */
6278 	__le32 initiator;
6279 	/* Reason code */
6280 	__le32 reasoncode;
6281 } __packed;
6282 
6283 struct wmi_addba_setresponse_cmd {
6284 	/* unique id identifying the vdev, generated by the caller */
6285 	__le32 vdev_id;
6286 	/* peer mac address */
6287 	struct wmi_mac_addr peer_macaddr;
6288 	/* Tid number */
6289 	__le32 tid;
6290 	/* status code */
6291 	__le32 statuscode;
6292 } __packed;
6293 
6294 struct wmi_send_singleamsdu_cmd {
6295 	/* unique id identifying the vdev, generated by the caller */
6296 	__le32 vdev_id;
6297 	/* peer mac address */
6298 	struct wmi_mac_addr peer_macaddr;
6299 	/* Tid number */
6300 	__le32 tid;
6301 } __packed;
6302 
6303 enum wmi_peer_smps_state {
6304 	WMI_PEER_SMPS_PS_NONE = 0x0,
6305 	WMI_PEER_SMPS_STATIC  = 0x1,
6306 	WMI_PEER_SMPS_DYNAMIC = 0x2
6307 };
6308 
6309 enum wmi_peer_chwidth {
6310 	WMI_PEER_CHWIDTH_20MHZ = 0,
6311 	WMI_PEER_CHWIDTH_40MHZ = 1,
6312 	WMI_PEER_CHWIDTH_80MHZ = 2,
6313 	WMI_PEER_CHWIDTH_160MHZ = 3,
6314 };
6315 
6316 enum wmi_peer_param {
6317 	WMI_PEER_SMPS_STATE = 0x1, /* see %wmi_peer_smps_state */
6318 	WMI_PEER_AMPDU      = 0x2,
6319 	WMI_PEER_AUTHORIZE  = 0x3,
6320 	WMI_PEER_CHAN_WIDTH = 0x4,
6321 	WMI_PEER_NSS        = 0x5,
6322 	WMI_PEER_USE_4ADDR  = 0x6,
6323 	WMI_PEER_USE_FIXED_PWR = 0x8,
6324 	WMI_PEER_PARAM_FIXED_RATE = 0x9,
6325 	WMI_PEER_DEBUG      = 0xa,
6326 	WMI_PEER_PHYMODE    = 0xd,
6327 	WMI_PEER_DUMMY_VAR  = 0xff, /* dummy parameter for STA PS workaround */
6328 };
6329 
6330 struct wmi_peer_set_param_cmd {
6331 	__le32 vdev_id;
6332 	struct wmi_mac_addr peer_macaddr;
6333 	__le32 param_id;
6334 	__le32 param_value;
6335 } __packed;
6336 
6337 #define MAX_SUPPORTED_RATES 128
6338 
6339 struct wmi_rate_set {
6340 	/* total number of rates */
6341 	__le32 num_rates;
6342 	/*
6343 	 * rates (each 8bit value) packed into a 32 bit word.
6344 	 * the rates are filled from least significant byte to most
6345 	 * significant byte.
6346 	 */
6347 	__le32 rates[(MAX_SUPPORTED_RATES / 4) + 1];
6348 } __packed;
6349 
6350 struct wmi_rate_set_arg {
6351 	unsigned int num_rates;
6352 	u8 rates[MAX_SUPPORTED_RATES];
6353 };
6354 
6355 /*
6356  * NOTE: It would bea good idea to represent the Tx MCS
6357  * info in one word and Rx in another word. This is split
6358  * into multiple words for convenience
6359  */
6360 struct wmi_vht_rate_set {
6361 	__le32 rx_max_rate; /* Max Rx data rate */
6362 	__le32 rx_mcs_set;  /* Negotiated RX VHT rates */
6363 	__le32 tx_max_rate; /* Max Tx data rate */
6364 	__le32 tx_mcs_set;  /* Negotiated TX VHT rates */
6365 } __packed;
6366 
6367 struct wmi_vht_rate_set_arg {
6368 	u32 rx_max_rate;
6369 	u32 rx_mcs_set;
6370 	u32 tx_max_rate;
6371 	u32 tx_mcs_set;
6372 };
6373 
6374 struct wmi_peer_set_rates_cmd {
6375 	/* peer MAC address */
6376 	struct wmi_mac_addr peer_macaddr;
6377 	/* legacy rate set */
6378 	struct wmi_rate_set peer_legacy_rates;
6379 	/* ht rate set */
6380 	struct wmi_rate_set peer_ht_rates;
6381 } __packed;
6382 
6383 struct wmi_peer_set_q_empty_callback_cmd {
6384 	/* unique id identifying the VDEV, generated by the caller */
6385 	__le32 vdev_id;
6386 	/* peer MAC address */
6387 	struct wmi_mac_addr peer_macaddr;
6388 	__le32 callback_enable;
6389 } __packed;
6390 
6391 struct wmi_peer_flags_map {
6392 	u32 auth;
6393 	u32 qos;
6394 	u32 need_ptk_4_way;
6395 	u32 need_gtk_2_way;
6396 	u32 apsd;
6397 	u32 ht;
6398 	u32 bw40;
6399 	u32 stbc;
6400 	u32 ldbc;
6401 	u32 dyn_mimops;
6402 	u32 static_mimops;
6403 	u32 spatial_mux;
6404 	u32 vht;
6405 	u32 bw80;
6406 	u32 vht_2g;
6407 	u32 pmf;
6408 	u32 bw160;
6409 };
6410 
6411 enum wmi_peer_flags {
6412 	WMI_PEER_AUTH = 0x00000001,
6413 	WMI_PEER_QOS = 0x00000002,
6414 	WMI_PEER_NEED_PTK_4_WAY = 0x00000004,
6415 	WMI_PEER_NEED_GTK_2_WAY = 0x00000010,
6416 	WMI_PEER_APSD = 0x00000800,
6417 	WMI_PEER_HT = 0x00001000,
6418 	WMI_PEER_40MHZ = 0x00002000,
6419 	WMI_PEER_STBC = 0x00008000,
6420 	WMI_PEER_LDPC = 0x00010000,
6421 	WMI_PEER_DYN_MIMOPS = 0x00020000,
6422 	WMI_PEER_STATIC_MIMOPS = 0x00040000,
6423 	WMI_PEER_SPATIAL_MUX = 0x00200000,
6424 	WMI_PEER_VHT = 0x02000000,
6425 	WMI_PEER_80MHZ = 0x04000000,
6426 	WMI_PEER_VHT_2G = 0x08000000,
6427 	WMI_PEER_PMF = 0x10000000,
6428 	WMI_PEER_160MHZ = 0x20000000
6429 };
6430 
6431 enum wmi_10x_peer_flags {
6432 	WMI_10X_PEER_AUTH = 0x00000001,
6433 	WMI_10X_PEER_QOS = 0x00000002,
6434 	WMI_10X_PEER_NEED_PTK_4_WAY = 0x00000004,
6435 	WMI_10X_PEER_NEED_GTK_2_WAY = 0x00000010,
6436 	WMI_10X_PEER_APSD = 0x00000800,
6437 	WMI_10X_PEER_HT = 0x00001000,
6438 	WMI_10X_PEER_40MHZ = 0x00002000,
6439 	WMI_10X_PEER_STBC = 0x00008000,
6440 	WMI_10X_PEER_LDPC = 0x00010000,
6441 	WMI_10X_PEER_DYN_MIMOPS = 0x00020000,
6442 	WMI_10X_PEER_STATIC_MIMOPS = 0x00040000,
6443 	WMI_10X_PEER_SPATIAL_MUX = 0x00200000,
6444 	WMI_10X_PEER_VHT = 0x02000000,
6445 	WMI_10X_PEER_80MHZ = 0x04000000,
6446 	WMI_10X_PEER_160MHZ = 0x20000000
6447 };
6448 
6449 enum wmi_10_2_peer_flags {
6450 	WMI_10_2_PEER_AUTH = 0x00000001,
6451 	WMI_10_2_PEER_QOS = 0x00000002,
6452 	WMI_10_2_PEER_NEED_PTK_4_WAY = 0x00000004,
6453 	WMI_10_2_PEER_NEED_GTK_2_WAY = 0x00000010,
6454 	WMI_10_2_PEER_APSD = 0x00000800,
6455 	WMI_10_2_PEER_HT = 0x00001000,
6456 	WMI_10_2_PEER_40MHZ = 0x00002000,
6457 	WMI_10_2_PEER_STBC = 0x00008000,
6458 	WMI_10_2_PEER_LDPC = 0x00010000,
6459 	WMI_10_2_PEER_DYN_MIMOPS = 0x00020000,
6460 	WMI_10_2_PEER_STATIC_MIMOPS = 0x00040000,
6461 	WMI_10_2_PEER_SPATIAL_MUX = 0x00200000,
6462 	WMI_10_2_PEER_VHT = 0x02000000,
6463 	WMI_10_2_PEER_80MHZ = 0x04000000,
6464 	WMI_10_2_PEER_VHT_2G = 0x08000000,
6465 	WMI_10_2_PEER_PMF = 0x10000000,
6466 	WMI_10_2_PEER_160MHZ = 0x20000000
6467 };
6468 
6469 /*
6470  * Peer rate capabilities.
6471  *
6472  * This is of interest to the ratecontrol
6473  * module which resides in the firmware. The bit definitions are
6474  * consistent with that defined in if_athrate.c.
6475  */
6476 #define WMI_RC_DS_FLAG          0x01
6477 #define WMI_RC_CW40_FLAG        0x02
6478 #define WMI_RC_SGI_FLAG         0x04
6479 #define WMI_RC_HT_FLAG          0x08
6480 #define WMI_RC_RTSCTS_FLAG      0x10
6481 #define WMI_RC_TX_STBC_FLAG     0x20
6482 #define WMI_RC_RX_STBC_FLAG     0xC0
6483 #define WMI_RC_RX_STBC_FLAG_S   6
6484 #define WMI_RC_WEP_TKIP_FLAG    0x100
6485 #define WMI_RC_TS_FLAG          0x200
6486 #define WMI_RC_UAPSD_FLAG       0x400
6487 
6488 /* Maximum listen interval supported by hw in units of beacon interval */
6489 #define ATH10K_MAX_HW_LISTEN_INTERVAL 5
6490 
6491 struct wmi_common_peer_assoc_complete_cmd {
6492 	struct wmi_mac_addr peer_macaddr;
6493 	__le32 vdev_id;
6494 	__le32 peer_new_assoc; /* 1=assoc, 0=reassoc */
6495 	__le32 peer_associd; /* 16 LSBs */
6496 	__le32 peer_flags;
6497 	__le32 peer_caps; /* 16 LSBs */
6498 	__le32 peer_listen_intval;
6499 	__le32 peer_ht_caps;
6500 	__le32 peer_max_mpdu;
6501 	__le32 peer_mpdu_density; /* 0..16 */
6502 	__le32 peer_rate_caps;
6503 	struct wmi_rate_set peer_legacy_rates;
6504 	struct wmi_rate_set peer_ht_rates;
6505 	__le32 peer_nss; /* num of spatial streams */
6506 	__le32 peer_vht_caps;
6507 	__le32 peer_phymode;
6508 	struct wmi_vht_rate_set peer_vht_rates;
6509 };
6510 
6511 struct wmi_main_peer_assoc_complete_cmd {
6512 	struct wmi_common_peer_assoc_complete_cmd cmd;
6513 
6514 	/* HT Operation Element of the peer. Five bytes packed in 2
6515 	 *  INT32 array and filled from lsb to msb.
6516 	 */
6517 	__le32 peer_ht_info[2];
6518 } __packed;
6519 
6520 struct wmi_10_1_peer_assoc_complete_cmd {
6521 	struct wmi_common_peer_assoc_complete_cmd cmd;
6522 } __packed;
6523 
6524 #define WMI_PEER_ASSOC_INFO0_MAX_MCS_IDX_LSB 0
6525 #define WMI_PEER_ASSOC_INFO0_MAX_MCS_IDX_MASK 0x0f
6526 #define WMI_PEER_ASSOC_INFO0_MAX_NSS_LSB 4
6527 #define WMI_PEER_ASSOC_INFO0_MAX_NSS_MASK 0xf0
6528 
6529 struct wmi_10_2_peer_assoc_complete_cmd {
6530 	struct wmi_common_peer_assoc_complete_cmd cmd;
6531 	__le32 info0; /* WMI_PEER_ASSOC_INFO0_ */
6532 } __packed;
6533 
6534 /* NSS Mapping to FW */
6535 #define WMI_PEER_NSS_MAP_ENABLE	BIT(31)
6536 #define WMI_PEER_NSS_160MHZ_MASK	GENMASK(2, 0)
6537 #define WMI_PEER_NSS_80_80MHZ_MASK	GENMASK(5, 3)
6538 
6539 struct wmi_10_4_peer_assoc_complete_cmd {
6540 	struct wmi_10_2_peer_assoc_complete_cmd cmd;
6541 	__le32 peer_bw_rxnss_override;
6542 } __packed;
6543 
6544 struct wmi_peer_assoc_complete_arg {
6545 	u8 addr[ETH_ALEN];
6546 	u32 vdev_id;
6547 	bool peer_reassoc;
6548 	u16 peer_aid;
6549 	u32 peer_flags; /* see %WMI_PEER_ */
6550 	u16 peer_caps;
6551 	u32 peer_listen_intval;
6552 	u32 peer_ht_caps;
6553 	u32 peer_max_mpdu;
6554 	u32 peer_mpdu_density; /* 0..16 */
6555 	u32 peer_rate_caps; /* see %WMI_RC_ */
6556 	struct wmi_rate_set_arg peer_legacy_rates;
6557 	struct wmi_rate_set_arg peer_ht_rates;
6558 	u32 peer_num_spatial_streams;
6559 	u32 peer_vht_caps;
6560 	enum wmi_phy_mode peer_phymode;
6561 	struct wmi_vht_rate_set_arg peer_vht_rates;
6562 	u32 peer_bw_rxnss_override;
6563 };
6564 
6565 struct wmi_peer_add_wds_entry_cmd {
6566 	/* peer MAC address */
6567 	struct wmi_mac_addr peer_macaddr;
6568 	/* wds MAC addr */
6569 	struct wmi_mac_addr wds_macaddr;
6570 } __packed;
6571 
6572 struct wmi_peer_remove_wds_entry_cmd {
6573 	/* wds MAC addr */
6574 	struct wmi_mac_addr wds_macaddr;
6575 } __packed;
6576 
6577 struct wmi_peer_q_empty_callback_event {
6578 	/* peer MAC address */
6579 	struct wmi_mac_addr peer_macaddr;
6580 } __packed;
6581 
6582 /*
6583  * Channel info WMI event
6584  */
6585 struct wmi_chan_info_event {
6586 	__le32 err_code;
6587 	__le32 freq;
6588 	__le32 cmd_flags;
6589 	__le32 noise_floor;
6590 	__le32 rx_clear_count;
6591 	__le32 cycle_count;
6592 } __packed;
6593 
6594 struct wmi_10_4_chan_info_event {
6595 	__le32 err_code;
6596 	__le32 freq;
6597 	__le32 cmd_flags;
6598 	__le32 noise_floor;
6599 	__le32 rx_clear_count;
6600 	__le32 cycle_count;
6601 	__le32 chan_tx_pwr_range;
6602 	__le32 chan_tx_pwr_tp;
6603 	__le32 rx_frame_count;
6604 } __packed;
6605 
6606 struct wmi_peer_sta_kickout_event {
6607 	struct wmi_mac_addr peer_macaddr;
6608 } __packed;
6609 
6610 #define WMI_CHAN_INFO_FLAG_COMPLETE BIT(0)
6611 #define WMI_CHAN_INFO_FLAG_PRE_COMPLETE BIT(1)
6612 
6613 /* Beacon filter wmi command info */
6614 #define BCN_FLT_MAX_SUPPORTED_IES	256
6615 #define BCN_FLT_MAX_ELEMS_IE_LIST	(BCN_FLT_MAX_SUPPORTED_IES / 32)
6616 
6617 struct bss_bcn_stats {
6618 	__le32 vdev_id;
6619 	__le32 bss_bcnsdropped;
6620 	__le32 bss_bcnsdelivered;
6621 } __packed;
6622 
6623 struct bcn_filter_stats {
6624 	__le32 bcns_dropped;
6625 	__le32 bcns_delivered;
6626 	__le32 activefilters;
6627 	struct bss_bcn_stats bss_stats;
6628 } __packed;
6629 
6630 struct wmi_add_bcn_filter_cmd {
6631 	u32 vdev_id;
6632 	u32 ie_map[BCN_FLT_MAX_ELEMS_IE_LIST];
6633 } __packed;
6634 
6635 enum wmi_sta_keepalive_method {
6636 	WMI_STA_KEEPALIVE_METHOD_NULL_FRAME = 1,
6637 	WMI_STA_KEEPALIVE_METHOD_UNSOLICITATED_ARP_RESPONSE = 2,
6638 };
6639 
6640 #define WMI_STA_KEEPALIVE_INTERVAL_DISABLE 0
6641 
6642 /* Firmware crashes if keepalive interval exceeds this limit */
6643 #define WMI_STA_KEEPALIVE_INTERVAL_MAX_SECONDS 0xffff
6644 
6645 /* note: ip4 addresses are in network byte order, i.e. big endian */
6646 struct wmi_sta_keepalive_arp_resp {
6647 	__be32 src_ip4_addr;
6648 	__be32 dest_ip4_addr;
6649 	struct wmi_mac_addr dest_mac_addr;
6650 } __packed;
6651 
6652 struct wmi_sta_keepalive_cmd {
6653 	__le32 vdev_id;
6654 	__le32 enabled;
6655 	__le32 method; /* WMI_STA_KEEPALIVE_METHOD_ */
6656 	__le32 interval; /* in seconds */
6657 	struct wmi_sta_keepalive_arp_resp arp_resp;
6658 } __packed;
6659 
6660 struct wmi_sta_keepalive_arg {
6661 	u32 vdev_id;
6662 	u32 enabled;
6663 	u32 method;
6664 	u32 interval;
6665 	__be32 src_ip4_addr;
6666 	__be32 dest_ip4_addr;
6667 	const u8 dest_mac_addr[ETH_ALEN];
6668 };
6669 
6670 enum wmi_force_fw_hang_type {
6671 	WMI_FORCE_FW_HANG_ASSERT = 1,
6672 	WMI_FORCE_FW_HANG_NO_DETECT,
6673 	WMI_FORCE_FW_HANG_CTRL_EP_FULL,
6674 	WMI_FORCE_FW_HANG_EMPTY_POINT,
6675 	WMI_FORCE_FW_HANG_STACK_OVERFLOW,
6676 	WMI_FORCE_FW_HANG_INFINITE_LOOP,
6677 };
6678 
6679 #define WMI_FORCE_FW_HANG_RANDOM_TIME 0xFFFFFFFF
6680 
6681 struct wmi_force_fw_hang_cmd {
6682 	__le32 type;
6683 	__le32 delay_ms;
6684 } __packed;
6685 
6686 enum wmi_pdev_reset_mode_type {
6687 	WMI_RST_MODE_TX_FLUSH = 1,
6688 	WMI_RST_MODE_WARM_RESET,
6689 	WMI_RST_MODE_COLD_RESET,
6690 	WMI_RST_MODE_WARM_RESET_RESTORE_CAL,
6691 	WMI_RST_MODE_COLD_RESET_RESTORE_CAL,
6692 	WMI_RST_MODE_MAX,
6693 };
6694 
6695 enum ath10k_dbglog_level {
6696 	ATH10K_DBGLOG_LEVEL_VERBOSE = 0,
6697 	ATH10K_DBGLOG_LEVEL_INFO = 1,
6698 	ATH10K_DBGLOG_LEVEL_WARN = 2,
6699 	ATH10K_DBGLOG_LEVEL_ERR = 3,
6700 };
6701 
6702 /* VAP ids to enable dbglog */
6703 #define ATH10K_DBGLOG_CFG_VAP_LOG_LSB		0
6704 #define ATH10K_DBGLOG_CFG_VAP_LOG_MASK		0x0000ffff
6705 
6706 /* to enable dbglog in the firmware */
6707 #define ATH10K_DBGLOG_CFG_REPORTING_ENABLE_LSB	16
6708 #define ATH10K_DBGLOG_CFG_REPORTING_ENABLE_MASK	0x00010000
6709 
6710 /* timestamp resolution */
6711 #define ATH10K_DBGLOG_CFG_RESOLUTION_LSB	17
6712 #define ATH10K_DBGLOG_CFG_RESOLUTION_MASK	0x000E0000
6713 
6714 /* number of queued messages before sending them to the host */
6715 #define ATH10K_DBGLOG_CFG_REPORT_SIZE_LSB	20
6716 #define ATH10K_DBGLOG_CFG_REPORT_SIZE_MASK	0x0ff00000
6717 
6718 /*
6719  * Log levels to enable. This defines the minimum level to enable, this is
6720  * not a bitmask. See enum ath10k_dbglog_level for the values.
6721  */
6722 #define ATH10K_DBGLOG_CFG_LOG_LVL_LSB		28
6723 #define ATH10K_DBGLOG_CFG_LOG_LVL_MASK		0x70000000
6724 
6725 /*
6726  * Note: this is a cleaned up version of a struct firmware uses. For
6727  * example, config_valid was hidden inside an array.
6728  */
6729 struct wmi_dbglog_cfg_cmd {
6730 	/* bitmask to hold mod id config*/
6731 	__le32 module_enable;
6732 
6733 	/* see ATH10K_DBGLOG_CFG_ */
6734 	__le32 config_enable;
6735 
6736 	/* mask of module id bits to be changed */
6737 	__le32 module_valid;
6738 
6739 	/* mask of config bits to be changed, see ATH10K_DBGLOG_CFG_ */
6740 	__le32 config_valid;
6741 } __packed;
6742 
6743 struct wmi_10_4_dbglog_cfg_cmd {
6744 	/* bitmask to hold mod id config*/
6745 	__le64 module_enable;
6746 
6747 	/* see ATH10K_DBGLOG_CFG_ */
6748 	__le32 config_enable;
6749 
6750 	/* mask of module id bits to be changed */
6751 	__le64 module_valid;
6752 
6753 	/* mask of config bits to be changed, see ATH10K_DBGLOG_CFG_ */
6754 	__le32 config_valid;
6755 } __packed;
6756 
6757 enum wmi_roam_reason {
6758 	WMI_ROAM_REASON_BETTER_AP = 1,
6759 	WMI_ROAM_REASON_BEACON_MISS = 2,
6760 	WMI_ROAM_REASON_LOW_RSSI = 3,
6761 	WMI_ROAM_REASON_SUITABLE_AP_FOUND = 4,
6762 	WMI_ROAM_REASON_HO_FAILED = 5,
6763 
6764 	/* keep last */
6765 	WMI_ROAM_REASON_MAX,
6766 };
6767 
6768 struct wmi_roam_ev {
6769 	__le32 vdev_id;
6770 	__le32 reason;
6771 } __packed;
6772 
6773 #define ATH10K_FRAGMT_THRESHOLD_MIN	540
6774 #define ATH10K_FRAGMT_THRESHOLD_MAX	2346
6775 
6776 #define WMI_MAX_EVENT 0x1000
6777 /* Maximum number of pending TXed WMI packets */
6778 #define WMI_SKB_HEADROOM sizeof(struct wmi_cmd_hdr)
6779 
6780 /* By default disable power save for IBSS */
6781 #define ATH10K_DEFAULT_ATIM 0
6782 
6783 #define WMI_MAX_MEM_REQS 16
6784 
6785 struct wmi_scan_ev_arg {
6786 	__le32 event_type; /* %WMI_SCAN_EVENT_ */
6787 	__le32 reason; /* %WMI_SCAN_REASON_ */
6788 	__le32 channel_freq; /* only valid for WMI_SCAN_EVENT_FOREIGN_CHANNEL */
6789 	__le32 scan_req_id;
6790 	__le32 scan_id;
6791 	__le32 vdev_id;
6792 };
6793 
6794 struct mgmt_tx_compl_params {
6795 	u32 desc_id;
6796 	u32 status;
6797 	u32 ppdu_id;
6798 	int ack_rssi;
6799 };
6800 
6801 struct wmi_tlv_mgmt_tx_compl_ev_arg {
6802 	__le32 desc_id;
6803 	__le32 status;
6804 	__le32 pdev_id;
6805 	__le32 ppdu_id;
6806 	__le32 ack_rssi;
6807 };
6808 
6809 struct wmi_tlv_mgmt_tx_bundle_compl_ev_arg {
6810 	__le32 num_reports;
6811 	const __le32 *desc_ids;
6812 	const __le32 *status;
6813 	const __le32 *ppdu_ids;
6814 	const __le32 *ack_rssi;
6815 };
6816 
6817 struct wmi_peer_delete_resp_ev_arg {
6818 	__le32 vdev_id;
6819 	struct wmi_mac_addr peer_addr;
6820 };
6821 
6822 #define WMI_MGMT_RX_NUM_RSSI 4
6823 struct wmi_mgmt_rx_ev_arg {
6824 	__le32 channel;
6825 	__le32 snr;
6826 	__le32 rate;
6827 	__le32 phy_mode;
6828 	__le32 buf_len;
6829 	__le32 status; /* %WMI_RX_STATUS_ */
6830 	struct wmi_mgmt_rx_ext_info ext_info;
6831 	__le32 rssi[WMI_MGMT_RX_NUM_RSSI];
6832 };
6833 
6834 struct wmi_ch_info_ev_arg {
6835 	__le32 err_code;
6836 	__le32 freq;
6837 	__le32 cmd_flags;
6838 	__le32 noise_floor;
6839 	__le32 rx_clear_count;
6840 	__le32 cycle_count;
6841 	__le32 chan_tx_pwr_range;
6842 	__le32 chan_tx_pwr_tp;
6843 	__le32 rx_frame_count;
6844 	__le32 my_bss_rx_cycle_count;
6845 	__le32 rx_11b_mode_data_duration;
6846 	__le32 tx_frame_cnt;
6847 	__le32 mac_clk_mhz;
6848 };
6849 
6850 /* From 10.4 firmware, not sure all have the same values. */
6851 enum wmi_vdev_start_status {
6852 	WMI_VDEV_START_OK = 0,
6853 	WMI_VDEV_START_CHAN_INVALID,
6854 };
6855 
6856 struct wmi_vdev_start_ev_arg {
6857 	__le32 vdev_id;
6858 	__le32 req_id;
6859 	__le32 resp_type; /* %WMI_VDEV_RESP_ */
6860 	__le32 status; /* See wmi_vdev_start_status enum above */
6861 };
6862 
6863 struct wmi_peer_kick_ev_arg {
6864 	const u8 *mac_addr;
6865 };
6866 
6867 struct wmi_swba_ev_arg {
6868 	__le32 vdev_map;
6869 	struct wmi_tim_info_arg tim_info[WMI_MAX_AP_VDEV];
6870 	const struct wmi_p2p_noa_info *noa_info[WMI_MAX_AP_VDEV];
6871 };
6872 
6873 struct wmi_phyerr_ev_arg {
6874 	u32 tsf_timestamp;
6875 	u16 freq1;
6876 	u16 freq2;
6877 	u8 rssi_combined;
6878 	u8 chan_width_mhz;
6879 	u8 phy_err_code;
6880 	u16 nf_chains[4];
6881 	u32 buf_len;
6882 	const u8 *buf;
6883 	u8 hdr_len;
6884 };
6885 
6886 struct wmi_phyerr_hdr_arg {
6887 	u32 num_phyerrs;
6888 	u32 tsf_l32;
6889 	u32 tsf_u32;
6890 	u32 buf_len;
6891 	const void *phyerrs;
6892 };
6893 
6894 struct wmi_dfs_status_ev_arg {
6895 	u32 status;
6896 };
6897 
6898 struct wmi_svc_rdy_ev_arg {
6899 	__le32 min_tx_power;
6900 	__le32 max_tx_power;
6901 	__le32 ht_cap;
6902 	__le32 vht_cap;
6903 	__le32 vht_supp_mcs;
6904 	__le32 sw_ver0;
6905 	__le32 sw_ver1;
6906 	__le32 fw_build;
6907 	__le32 phy_capab;
6908 	__le32 num_rf_chains;
6909 	__le32 eeprom_rd;
6910 	__le32 num_mem_reqs;
6911 	__le32 low_2ghz_chan;
6912 	__le32 high_2ghz_chan;
6913 	__le32 low_5ghz_chan;
6914 	__le32 high_5ghz_chan;
6915 	__le32 sys_cap_info;
6916 	const __le32 *service_map;
6917 	size_t service_map_len;
6918 	const struct wlan_host_mem_req *mem_reqs[WMI_MAX_MEM_REQS];
6919 };
6920 
6921 struct wmi_svc_avail_ev_arg {
6922 	bool service_map_ext_valid;
6923 	__le32 service_map_ext_len;
6924 	const __le32 *service_map_ext;
6925 };
6926 
6927 struct wmi_rdy_ev_arg {
6928 	__le32 sw_version;
6929 	__le32 abi_version;
6930 	__le32 status;
6931 	const u8 *mac_addr;
6932 };
6933 
6934 struct wmi_roam_ev_arg {
6935 	__le32 vdev_id;
6936 	__le32 reason;
6937 	__le32 rssi;
6938 };
6939 
6940 struct wmi_echo_ev_arg {
6941 	__le32 value;
6942 };
6943 
6944 struct wmi_pdev_temperature_event {
6945 	/* temperature value in Celcius degree */
6946 	__le32 temperature;
6947 } __packed;
6948 
6949 struct wmi_pdev_bss_chan_info_event {
6950 	__le32 freq;
6951 	__le32 noise_floor;
6952 	__le64 cycle_busy;
6953 	__le64 cycle_total;
6954 	__le64 cycle_tx;
6955 	__le64 cycle_rx;
6956 	__le64 cycle_rx_bss;
6957 	__le32 reserved;
6958 } __packed;
6959 
6960 /* WOW structures */
6961 enum wmi_wow_wakeup_event {
6962 	WOW_BMISS_EVENT = 0,
6963 	WOW_BETTER_AP_EVENT,
6964 	WOW_DEAUTH_RECVD_EVENT,
6965 	WOW_MAGIC_PKT_RECVD_EVENT,
6966 	WOW_GTK_ERR_EVENT,
6967 	WOW_FOURWAY_HSHAKE_EVENT,
6968 	WOW_EAPOL_RECVD_EVENT,
6969 	WOW_NLO_DETECTED_EVENT,
6970 	WOW_DISASSOC_RECVD_EVENT,
6971 	WOW_PATTERN_MATCH_EVENT,
6972 	WOW_CSA_IE_EVENT,
6973 	WOW_PROBE_REQ_WPS_IE_EVENT,
6974 	WOW_AUTH_REQ_EVENT,
6975 	WOW_ASSOC_REQ_EVENT,
6976 	WOW_HTT_EVENT,
6977 	WOW_RA_MATCH_EVENT,
6978 	WOW_HOST_AUTO_SHUTDOWN_EVENT,
6979 	WOW_IOAC_MAGIC_EVENT,
6980 	WOW_IOAC_SHORT_EVENT,
6981 	WOW_IOAC_EXTEND_EVENT,
6982 	WOW_IOAC_TIMER_EVENT,
6983 	WOW_DFS_PHYERR_RADAR_EVENT,
6984 	WOW_BEACON_EVENT,
6985 	WOW_CLIENT_KICKOUT_EVENT,
6986 	WOW_EVENT_MAX,
6987 };
6988 
6989 #define C2S(x) case x: return #x
6990 
wow_wakeup_event(enum wmi_wow_wakeup_event ev)6991 static inline const char *wow_wakeup_event(enum wmi_wow_wakeup_event ev)
6992 {
6993 	switch (ev) {
6994 	C2S(WOW_BMISS_EVENT);
6995 	C2S(WOW_BETTER_AP_EVENT);
6996 	C2S(WOW_DEAUTH_RECVD_EVENT);
6997 	C2S(WOW_MAGIC_PKT_RECVD_EVENT);
6998 	C2S(WOW_GTK_ERR_EVENT);
6999 	C2S(WOW_FOURWAY_HSHAKE_EVENT);
7000 	C2S(WOW_EAPOL_RECVD_EVENT);
7001 	C2S(WOW_NLO_DETECTED_EVENT);
7002 	C2S(WOW_DISASSOC_RECVD_EVENT);
7003 	C2S(WOW_PATTERN_MATCH_EVENT);
7004 	C2S(WOW_CSA_IE_EVENT);
7005 	C2S(WOW_PROBE_REQ_WPS_IE_EVENT);
7006 	C2S(WOW_AUTH_REQ_EVENT);
7007 	C2S(WOW_ASSOC_REQ_EVENT);
7008 	C2S(WOW_HTT_EVENT);
7009 	C2S(WOW_RA_MATCH_EVENT);
7010 	C2S(WOW_HOST_AUTO_SHUTDOWN_EVENT);
7011 	C2S(WOW_IOAC_MAGIC_EVENT);
7012 	C2S(WOW_IOAC_SHORT_EVENT);
7013 	C2S(WOW_IOAC_EXTEND_EVENT);
7014 	C2S(WOW_IOAC_TIMER_EVENT);
7015 	C2S(WOW_DFS_PHYERR_RADAR_EVENT);
7016 	C2S(WOW_BEACON_EVENT);
7017 	C2S(WOW_CLIENT_KICKOUT_EVENT);
7018 	C2S(WOW_EVENT_MAX);
7019 	default:
7020 		return NULL;
7021 	}
7022 }
7023 
7024 enum wmi_wow_wake_reason {
7025 	WOW_REASON_UNSPECIFIED = -1,
7026 	WOW_REASON_NLOD = 0,
7027 	WOW_REASON_AP_ASSOC_LOST,
7028 	WOW_REASON_LOW_RSSI,
7029 	WOW_REASON_DEAUTH_RECVD,
7030 	WOW_REASON_DISASSOC_RECVD,
7031 	WOW_REASON_GTK_HS_ERR,
7032 	WOW_REASON_EAP_REQ,
7033 	WOW_REASON_FOURWAY_HS_RECV,
7034 	WOW_REASON_TIMER_INTR_RECV,
7035 	WOW_REASON_PATTERN_MATCH_FOUND,
7036 	WOW_REASON_RECV_MAGIC_PATTERN,
7037 	WOW_REASON_P2P_DISC,
7038 	WOW_REASON_WLAN_HB,
7039 	WOW_REASON_CSA_EVENT,
7040 	WOW_REASON_PROBE_REQ_WPS_IE_RECV,
7041 	WOW_REASON_AUTH_REQ_RECV,
7042 	WOW_REASON_ASSOC_REQ_RECV,
7043 	WOW_REASON_HTT_EVENT,
7044 	WOW_REASON_RA_MATCH,
7045 	WOW_REASON_HOST_AUTO_SHUTDOWN,
7046 	WOW_REASON_IOAC_MAGIC_EVENT,
7047 	WOW_REASON_IOAC_SHORT_EVENT,
7048 	WOW_REASON_IOAC_EXTEND_EVENT,
7049 	WOW_REASON_IOAC_TIMER_EVENT,
7050 	WOW_REASON_ROAM_HO,
7051 	WOW_REASON_DFS_PHYERR_RADADR_EVENT,
7052 	WOW_REASON_BEACON_RECV,
7053 	WOW_REASON_CLIENT_KICKOUT_EVENT,
7054 	WOW_REASON_DEBUG_TEST = 0xFF,
7055 };
7056 
wow_reason(enum wmi_wow_wake_reason reason)7057 static inline const char *wow_reason(enum wmi_wow_wake_reason reason)
7058 {
7059 	switch (reason) {
7060 	C2S(WOW_REASON_UNSPECIFIED);
7061 	C2S(WOW_REASON_NLOD);
7062 	C2S(WOW_REASON_AP_ASSOC_LOST);
7063 	C2S(WOW_REASON_LOW_RSSI);
7064 	C2S(WOW_REASON_DEAUTH_RECVD);
7065 	C2S(WOW_REASON_DISASSOC_RECVD);
7066 	C2S(WOW_REASON_GTK_HS_ERR);
7067 	C2S(WOW_REASON_EAP_REQ);
7068 	C2S(WOW_REASON_FOURWAY_HS_RECV);
7069 	C2S(WOW_REASON_TIMER_INTR_RECV);
7070 	C2S(WOW_REASON_PATTERN_MATCH_FOUND);
7071 	C2S(WOW_REASON_RECV_MAGIC_PATTERN);
7072 	C2S(WOW_REASON_P2P_DISC);
7073 	C2S(WOW_REASON_WLAN_HB);
7074 	C2S(WOW_REASON_CSA_EVENT);
7075 	C2S(WOW_REASON_PROBE_REQ_WPS_IE_RECV);
7076 	C2S(WOW_REASON_AUTH_REQ_RECV);
7077 	C2S(WOW_REASON_ASSOC_REQ_RECV);
7078 	C2S(WOW_REASON_HTT_EVENT);
7079 	C2S(WOW_REASON_RA_MATCH);
7080 	C2S(WOW_REASON_HOST_AUTO_SHUTDOWN);
7081 	C2S(WOW_REASON_IOAC_MAGIC_EVENT);
7082 	C2S(WOW_REASON_IOAC_SHORT_EVENT);
7083 	C2S(WOW_REASON_IOAC_EXTEND_EVENT);
7084 	C2S(WOW_REASON_IOAC_TIMER_EVENT);
7085 	C2S(WOW_REASON_ROAM_HO);
7086 	C2S(WOW_REASON_DFS_PHYERR_RADADR_EVENT);
7087 	C2S(WOW_REASON_BEACON_RECV);
7088 	C2S(WOW_REASON_CLIENT_KICKOUT_EVENT);
7089 	C2S(WOW_REASON_DEBUG_TEST);
7090 	default:
7091 		return NULL;
7092 	}
7093 }
7094 
7095 #undef C2S
7096 
7097 struct wmi_wow_ev_arg {
7098 	u32 vdev_id;
7099 	u32 flag;
7100 	enum wmi_wow_wake_reason wake_reason;
7101 	u32 data_len;
7102 };
7103 
7104 #define WOW_MIN_PATTERN_SIZE	1
7105 #define WOW_MAX_PATTERN_SIZE	148
7106 #define WOW_MAX_PKT_OFFSET	128
7107 #define WOW_HDR_LEN	(sizeof(struct ieee80211_hdr_3addr) + \
7108 	sizeof(struct rfc1042_hdr))
7109 #define WOW_MAX_REDUCE	(WOW_HDR_LEN - sizeof(struct ethhdr) - \
7110 	offsetof(struct ieee80211_hdr_3addr, addr1))
7111 
7112 enum wmi_tdls_state {
7113 	WMI_TDLS_DISABLE,
7114 	WMI_TDLS_ENABLE_PASSIVE,
7115 	WMI_TDLS_ENABLE_ACTIVE,
7116 	WMI_TDLS_ENABLE_ACTIVE_EXTERNAL_CONTROL,
7117 };
7118 
7119 enum wmi_tdls_peer_state {
7120 	WMI_TDLS_PEER_STATE_PEERING,
7121 	WMI_TDLS_PEER_STATE_CONNECTED,
7122 	WMI_TDLS_PEER_STATE_TEARDOWN,
7123 };
7124 
7125 struct wmi_tdls_peer_update_cmd_arg {
7126 	u32 vdev_id;
7127 	enum wmi_tdls_peer_state peer_state;
7128 	u8 addr[ETH_ALEN];
7129 };
7130 
7131 #define WMI_TDLS_MAX_SUPP_OPER_CLASSES 32
7132 
7133 #define WMI_TDLS_PEER_SP_MASK	0x60
7134 #define WMI_TDLS_PEER_SP_LSB	5
7135 
7136 enum wmi_tdls_options {
7137 	WMI_TDLS_OFFCHAN_EN = BIT(0),
7138 	WMI_TDLS_BUFFER_STA_EN = BIT(1),
7139 	WMI_TDLS_SLEEP_STA_EN = BIT(2),
7140 };
7141 
7142 enum {
7143 	WMI_TDLS_PEER_QOS_AC_VO = BIT(0),
7144 	WMI_TDLS_PEER_QOS_AC_VI = BIT(1),
7145 	WMI_TDLS_PEER_QOS_AC_BK = BIT(2),
7146 	WMI_TDLS_PEER_QOS_AC_BE = BIT(3),
7147 };
7148 
7149 struct wmi_tdls_peer_capab_arg {
7150 	u8 peer_uapsd_queues;
7151 	u8 peer_max_sp;
7152 	u32 buff_sta_support;
7153 	u32 off_chan_support;
7154 	u32 peer_curr_operclass;
7155 	u32 self_curr_operclass;
7156 	u32 peer_chan_len;
7157 	u32 peer_operclass_len;
7158 	u8 peer_operclass[WMI_TDLS_MAX_SUPP_OPER_CLASSES];
7159 	u32 is_peer_responder;
7160 	u32 pref_offchan_num;
7161 	u32 pref_offchan_bw;
7162 };
7163 
7164 struct wmi_10_4_tdls_set_state_cmd {
7165 	__le32 vdev_id;
7166 	__le32 state;
7167 	__le32 notification_interval_ms;
7168 	__le32 tx_discovery_threshold;
7169 	__le32 tx_teardown_threshold;
7170 	__le32 rssi_teardown_threshold;
7171 	__le32 rssi_delta;
7172 	__le32 tdls_options;
7173 	__le32 tdls_peer_traffic_ind_window;
7174 	__le32 tdls_peer_traffic_response_timeout_ms;
7175 	__le32 tdls_puapsd_mask;
7176 	__le32 tdls_puapsd_inactivity_time_ms;
7177 	__le32 tdls_puapsd_rx_frame_threshold;
7178 	__le32 teardown_notification_ms;
7179 	__le32 tdls_peer_kickout_threshold;
7180 } __packed;
7181 
7182 struct wmi_tdls_peer_capabilities {
7183 	__le32 peer_qos;
7184 	__le32 buff_sta_support;
7185 	__le32 off_chan_support;
7186 	__le32 peer_curr_operclass;
7187 	__le32 self_curr_operclass;
7188 	__le32 peer_chan_len;
7189 	__le32 peer_operclass_len;
7190 	u8 peer_operclass[WMI_TDLS_MAX_SUPP_OPER_CLASSES];
7191 	__le32 is_peer_responder;
7192 	__le32 pref_offchan_num;
7193 	__le32 pref_offchan_bw;
7194 	struct wmi_channel peer_chan_list[1];
7195 } __packed;
7196 
7197 struct wmi_10_4_tdls_peer_update_cmd {
7198 	__le32 vdev_id;
7199 	struct wmi_mac_addr peer_macaddr;
7200 	__le32 peer_state;
7201 	__le32 reserved[4];
7202 	struct wmi_tdls_peer_capabilities peer_capab;
7203 } __packed;
7204 
7205 enum wmi_tdls_peer_reason {
7206 	WMI_TDLS_TEARDOWN_REASON_TX,
7207 	WMI_TDLS_TEARDOWN_REASON_RSSI,
7208 	WMI_TDLS_TEARDOWN_REASON_SCAN,
7209 	WMI_TDLS_DISCONNECTED_REASON_PEER_DELETE,
7210 	WMI_TDLS_TEARDOWN_REASON_PTR_TIMEOUT,
7211 	WMI_TDLS_TEARDOWN_REASON_BAD_PTR,
7212 	WMI_TDLS_TEARDOWN_REASON_NO_RESPONSE,
7213 	WMI_TDLS_ENTER_BUF_STA,
7214 	WMI_TDLS_EXIT_BUF_STA,
7215 	WMI_TDLS_ENTER_BT_BUSY_MODE,
7216 	WMI_TDLS_EXIT_BT_BUSY_MODE,
7217 	WMI_TDLS_SCAN_STARTED_EVENT,
7218 	WMI_TDLS_SCAN_COMPLETED_EVENT,
7219 };
7220 
7221 enum wmi_tdls_peer_notification {
7222 	WMI_TDLS_SHOULD_DISCOVER,
7223 	WMI_TDLS_SHOULD_TEARDOWN,
7224 	WMI_TDLS_PEER_DISCONNECTED,
7225 	WMI_TDLS_CONNECTION_TRACKER_NOTIFICATION,
7226 };
7227 
7228 struct wmi_tdls_peer_event {
7229 	struct wmi_mac_addr peer_macaddr;
7230 	/* see enum wmi_tdls_peer_notification*/
7231 	__le32 peer_status;
7232 	/* see enum wmi_tdls_peer_reason */
7233 	__le32 peer_reason;
7234 	__le32 vdev_id;
7235 } __packed;
7236 
7237 enum wmi_tid_aggr_control_conf {
7238 	WMI_TID_CONFIG_AGGR_CONTROL_IGNORE,
7239 	WMI_TID_CONFIG_AGGR_CONTROL_ENABLE,
7240 	WMI_TID_CONFIG_AGGR_CONTROL_DISABLE,
7241 };
7242 
7243 enum wmi_noack_tid_conf {
7244 	WMI_NOACK_TID_CONFIG_IGNORE_ACK_POLICY,
7245 	WMI_PEER_TID_CONFIG_ACK,
7246 	WMI_PEER_TID_CONFIG_NOACK,
7247 };
7248 
7249 enum wmi_tid_rate_ctrl_conf {
7250 	WMI_TID_CONFIG_RATE_CONTROL_IGNORE,
7251 	WMI_TID_CONFIG_RATE_CONTROL_AUTO,
7252 	WMI_TID_CONFIG_RATE_CONTROL_FIXED_RATE,
7253 	WMI_TID_CONFIG_RATE_CONTROL_DEFAULT_LOWEST_RATE,
7254 	WMI_PEER_TID_CONFIG_RATE_UPPER_CAP,
7255 };
7256 
7257 enum wmi_tid_rtscts_control_conf {
7258 	WMI_TID_CONFIG_RTSCTS_CONTROL_ENABLE,
7259 	WMI_TID_CONFIG_RTSCTS_CONTROL_DISABLE,
7260 };
7261 
7262 enum wmi_ext_tid_config_map {
7263 	WMI_EXT_TID_RTS_CTS_CONFIG = BIT(0),
7264 };
7265 
7266 struct wmi_per_peer_per_tid_cfg_arg {
7267 	u32 vdev_id;
7268 	struct wmi_mac_addr peer_macaddr;
7269 	u32 tid;
7270 	enum wmi_noack_tid_conf ack_policy;
7271 	enum wmi_tid_aggr_control_conf aggr_control;
7272 	u8 rate_ctrl;
7273 	u32 retry_count;
7274 	u32 rcode_flags;
7275 	u32 ext_tid_cfg_bitmap;
7276 	u32 rtscts_ctrl;
7277 };
7278 
7279 struct wmi_peer_per_tid_cfg_cmd {
7280 	__le32 vdev_id;
7281 	struct wmi_mac_addr peer_macaddr;
7282 	__le32 tid;
7283 
7284 	/* see enum wmi_noack_tid_conf */
7285 	__le32 ack_policy;
7286 
7287 	/* see enum wmi_tid_aggr_control_conf */
7288 	__le32 aggr_control;
7289 
7290 	/* see enum wmi_tid_rate_ctrl_conf */
7291 	__le32 rate_control;
7292 	__le32 rcode_flags;
7293 	__le32 retry_count;
7294 
7295 	/* See enum wmi_ext_tid_config_map */
7296 	__le32 ext_tid_cfg_bitmap;
7297 
7298 	/* see enum wmi_tid_rtscts_control_conf */
7299 	__le32 rtscts_ctrl;
7300 } __packed;
7301 
7302 enum wmi_txbf_conf {
7303 	WMI_TXBF_CONF_UNSUPPORTED,
7304 	WMI_TXBF_CONF_BEFORE_ASSOC,
7305 	WMI_TXBF_CONF_AFTER_ASSOC,
7306 };
7307 
7308 #define	WMI_CCA_DETECT_LEVEL_AUTO	0
7309 #define	WMI_CCA_DETECT_MARGIN_AUTO	0
7310 
7311 struct wmi_pdev_set_adaptive_cca_params {
7312 	__le32 enable;
7313 	__le32 cca_detect_level;
7314 	__le32 cca_detect_margin;
7315 } __packed;
7316 
7317 #define WMI_PNO_MAX_SCHED_SCAN_PLANS      2
7318 #define WMI_PNO_MAX_SCHED_SCAN_PLAN_INT   7200
7319 #define WMI_PNO_MAX_SCHED_SCAN_PLAN_ITRNS 100
7320 #define WMI_PNO_MAX_NETW_CHANNELS         26
7321 #define WMI_PNO_MAX_NETW_CHANNELS_EX      60
7322 #define WMI_PNO_MAX_SUPP_NETWORKS         WLAN_SCAN_PARAMS_MAX_SSID
7323 #define WMI_PNO_MAX_IE_LENGTH             WLAN_SCAN_PARAMS_MAX_IE_LEN
7324 
7325 /*size based of dot11 declaration without extra IEs as we will not carry those for PNO*/
7326 #define WMI_PNO_MAX_PB_REQ_SIZE    450
7327 
7328 #define WMI_PNO_24G_DEFAULT_CH     1
7329 #define WMI_PNO_5G_DEFAULT_CH      36
7330 
7331 #define WMI_ACTIVE_MAX_CHANNEL_TIME 40
7332 #define WMI_PASSIVE_MAX_CHANNEL_TIME   110
7333 
7334 /* SSID broadcast type */
7335 enum wmi_SSID_bcast_type {
7336 	BCAST_UNKNOWN      = 0,
7337 	BCAST_NORMAL       = 1,
7338 	BCAST_HIDDEN       = 2,
7339 };
7340 
7341 struct wmi_network_type {
7342 	struct wmi_ssid ssid;
7343 	u32 authentication;
7344 	u32 encryption;
7345 	u32 bcast_nw_type;
7346 	u8 channel_count;
7347 	u16 channels[WMI_PNO_MAX_NETW_CHANNELS_EX];
7348 	s32 rssi_threshold;
7349 } __packed;
7350 
7351 struct wmi_pno_scan_req {
7352 	u8 enable;
7353 	u8 vdev_id;
7354 	u8 uc_networks_count;
7355 	struct wmi_network_type a_networks[WMI_PNO_MAX_SUPP_NETWORKS];
7356 	u32 fast_scan_period;
7357 	u32 slow_scan_period;
7358 	u8 fast_scan_max_cycles;
7359 
7360 	bool do_passive_scan;
7361 
7362 	u32 delay_start_time;
7363 	u32 active_min_time;
7364 	u32 active_max_time;
7365 	u32 passive_min_time;
7366 	u32 passive_max_time;
7367 
7368 	/* mac address randomization attributes */
7369 	u32 enable_pno_scan_randomization;
7370 	u8 mac_addr[ETH_ALEN];
7371 	u8 mac_addr_mask[ETH_ALEN];
7372 } __packed;
7373 
7374 enum wmi_host_platform_type {
7375 	WMI_HOST_PLATFORM_HIGH_PERF,
7376 	WMI_HOST_PLATFORM_LOW_PERF,
7377 };
7378 
7379 enum wmi_bss_survey_req_type {
7380 	WMI_BSS_SURVEY_REQ_TYPE_READ = 1,
7381 	WMI_BSS_SURVEY_REQ_TYPE_READ_CLEAR,
7382 };
7383 
7384 struct wmi_pdev_chan_info_req_cmd {
7385 	__le32 type;
7386 	__le32 reserved;
7387 } __packed;
7388 
7389 /* bb timing register configurations */
7390 struct wmi_bb_timing_cfg_arg {
7391 	/* Tx_end to pa off timing */
7392 	u32 bb_tx_timing;
7393 
7394 	/* Tx_end to external pa off timing */
7395 	u32 bb_xpa_timing;
7396 };
7397 
7398 struct wmi_pdev_bb_timing_cfg_cmd {
7399 	/* Tx_end to pa off timing */
7400 	__le32 bb_tx_timing;
7401 
7402 	/* Tx_end to external pa off timing */
7403 	__le32 bb_xpa_timing;
7404 } __packed;
7405 
7406 struct ath10k;
7407 struct ath10k_vif;
7408 struct ath10k_fw_stats_pdev;
7409 struct ath10k_fw_stats_peer;
7410 struct ath10k_fw_stats;
7411 
7412 int ath10k_wmi_attach(struct ath10k *ar);
7413 void ath10k_wmi_detach(struct ath10k *ar);
7414 void ath10k_wmi_free_host_mem(struct ath10k *ar);
7415 int ath10k_wmi_wait_for_service_ready(struct ath10k *ar);
7416 int ath10k_wmi_wait_for_unified_ready(struct ath10k *ar);
7417 
7418 struct sk_buff *ath10k_wmi_alloc_skb(struct ath10k *ar, u32 len);
7419 int ath10k_wmi_connect(struct ath10k *ar);
7420 
7421 int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, u32 cmd_id);
7422 int ath10k_wmi_cmd_send_nowait(struct ath10k *ar, struct sk_buff *skb,
7423 			       u32 cmd_id);
7424 void ath10k_wmi_start_scan_init(struct ath10k *ar, struct wmi_start_scan_arg *arg);
7425 
7426 void ath10k_wmi_pull_pdev_stats_base(const struct wmi_pdev_stats_base *src,
7427 				     struct ath10k_fw_stats_pdev *dst);
7428 void ath10k_wmi_pull_pdev_stats_tx(const struct wmi_pdev_stats_tx *src,
7429 				   struct ath10k_fw_stats_pdev *dst);
7430 void ath10k_wmi_pull_pdev_stats_rx(const struct wmi_pdev_stats_rx *src,
7431 				   struct ath10k_fw_stats_pdev *dst);
7432 void ath10k_wmi_pull_pdev_stats_extra(const struct wmi_pdev_stats_extra *src,
7433 				      struct ath10k_fw_stats_pdev *dst);
7434 void ath10k_wmi_pull_peer_stats(const struct wmi_peer_stats *src,
7435 				struct ath10k_fw_stats_peer *dst);
7436 void ath10k_wmi_put_host_mem_chunks(struct ath10k *ar,
7437 				    struct wmi_host_mem_chunks *chunks);
7438 void ath10k_wmi_put_start_scan_common(struct wmi_start_scan_common *cmn,
7439 				      const struct wmi_start_scan_arg *arg);
7440 void ath10k_wmi_set_wmm_param(struct wmi_wmm_params *params,
7441 			      const struct wmi_wmm_params_arg *arg);
7442 void ath10k_wmi_put_wmi_channel(struct ath10k *ar, struct wmi_channel *ch,
7443 				const struct wmi_channel_arg *arg);
7444 int ath10k_wmi_start_scan_verify(const struct wmi_start_scan_arg *arg);
7445 
7446 int ath10k_wmi_event_scan(struct ath10k *ar, struct sk_buff *skb);
7447 int ath10k_wmi_event_mgmt_rx(struct ath10k *ar, struct sk_buff *skb);
7448 int ath10k_wmi_event_mgmt_tx_compl(struct ath10k *ar, struct sk_buff *skb);
7449 int ath10k_wmi_event_mgmt_tx_bundle_compl(struct ath10k *ar, struct sk_buff *skb);
7450 void ath10k_wmi_event_chan_info(struct ath10k *ar, struct sk_buff *skb);
7451 void ath10k_wmi_event_echo(struct ath10k *ar, struct sk_buff *skb);
7452 int ath10k_wmi_event_debug_mesg(struct ath10k *ar, struct sk_buff *skb);
7453 void ath10k_wmi_event_update_stats(struct ath10k *ar, struct sk_buff *skb);
7454 void ath10k_wmi_event_vdev_start_resp(struct ath10k *ar, struct sk_buff *skb);
7455 void ath10k_wmi_event_vdev_stopped(struct ath10k *ar, struct sk_buff *skb);
7456 void ath10k_wmi_event_peer_sta_kickout(struct ath10k *ar, struct sk_buff *skb);
7457 void ath10k_wmi_event_host_swba(struct ath10k *ar, struct sk_buff *skb);
7458 void ath10k_wmi_event_tbttoffset_update(struct ath10k *ar, struct sk_buff *skb);
7459 void ath10k_wmi_event_dfs(struct ath10k *ar,
7460 			  struct wmi_phyerr_ev_arg *phyerr, u64 tsf);
7461 void ath10k_wmi_event_spectral_scan(struct ath10k *ar,
7462 				    struct wmi_phyerr_ev_arg *phyerr,
7463 				    u64 tsf);
7464 void ath10k_wmi_event_phyerr(struct ath10k *ar, struct sk_buff *skb);
7465 void ath10k_wmi_event_roam(struct ath10k *ar, struct sk_buff *skb);
7466 void ath10k_wmi_event_profile_match(struct ath10k *ar, struct sk_buff *skb);
7467 void ath10k_wmi_event_debug_print(struct ath10k *ar, struct sk_buff *skb);
7468 void ath10k_wmi_event_pdev_qvit(struct ath10k *ar, struct sk_buff *skb);
7469 void ath10k_wmi_event_wlan_profile_data(struct ath10k *ar, struct sk_buff *skb);
7470 void ath10k_wmi_event_rtt_measurement_report(struct ath10k *ar,
7471 					     struct sk_buff *skb);
7472 void ath10k_wmi_event_tsf_measurement_report(struct ath10k *ar,
7473 					     struct sk_buff *skb);
7474 void ath10k_wmi_event_rtt_error_report(struct ath10k *ar, struct sk_buff *skb);
7475 void ath10k_wmi_event_wow_wakeup_host(struct ath10k *ar, struct sk_buff *skb);
7476 void ath10k_wmi_event_dcs_interference(struct ath10k *ar, struct sk_buff *skb);
7477 void ath10k_wmi_event_pdev_tpc_config(struct ath10k *ar, struct sk_buff *skb);
7478 void ath10k_wmi_event_pdev_ftm_intg(struct ath10k *ar, struct sk_buff *skb);
7479 void ath10k_wmi_event_gtk_offload_status(struct ath10k *ar,
7480 					 struct sk_buff *skb);
7481 void ath10k_wmi_event_gtk_rekey_fail(struct ath10k *ar, struct sk_buff *skb);
7482 void ath10k_wmi_event_delba_complete(struct ath10k *ar, struct sk_buff *skb);
7483 void ath10k_wmi_event_addba_complete(struct ath10k *ar, struct sk_buff *skb);
7484 void ath10k_wmi_event_vdev_install_key_complete(struct ath10k *ar,
7485 						struct sk_buff *skb);
7486 void ath10k_wmi_event_inst_rssi_stats(struct ath10k *ar, struct sk_buff *skb);
7487 void ath10k_wmi_event_vdev_standby_req(struct ath10k *ar, struct sk_buff *skb);
7488 void ath10k_wmi_event_vdev_resume_req(struct ath10k *ar, struct sk_buff *skb);
7489 void ath10k_wmi_event_service_ready(struct ath10k *ar, struct sk_buff *skb);
7490 int ath10k_wmi_event_ready(struct ath10k *ar, struct sk_buff *skb);
7491 void ath10k_wmi_event_service_available(struct ath10k *ar, struct sk_buff *skb);
7492 int ath10k_wmi_op_pull_phyerr_ev(struct ath10k *ar, const void *phyerr_buf,
7493 				 int left_len, struct wmi_phyerr_ev_arg *arg);
7494 void ath10k_wmi_main_op_fw_stats_fill(struct ath10k *ar,
7495 				      struct ath10k_fw_stats *fw_stats,
7496 				      char *buf);
7497 void ath10k_wmi_10x_op_fw_stats_fill(struct ath10k *ar,
7498 				     struct ath10k_fw_stats *fw_stats,
7499 				     char *buf);
7500 size_t ath10k_wmi_fw_stats_num_peers(struct list_head *head);
7501 size_t ath10k_wmi_fw_stats_num_vdevs(struct list_head *head);
7502 void ath10k_wmi_10_4_op_fw_stats_fill(struct ath10k *ar,
7503 				      struct ath10k_fw_stats *fw_stats,
7504 				      char *buf);
7505 int ath10k_wmi_op_get_vdev_subtype(struct ath10k *ar,
7506 				   enum wmi_vdev_subtype subtype);
7507 int ath10k_wmi_barrier(struct ath10k *ar);
7508 void ath10k_wmi_tpc_config_get_rate_code(u8 *rate_code, u16 *pream_table,
7509 					 u32 num_tx_chain);
7510 void ath10k_wmi_event_tpc_final_table(struct ath10k *ar, struct sk_buff *skb);
7511 
7512 #endif /* _WMI_H_ */
7513