| /Linux-v5.15/arch/arm64/boot/dts/mediatek/ |
| D | mt6358.dtsi | 25 regulator-ramp-delay = <12500>;
26 regulator-enable-ramp-delay = <0>;
35 regulator-ramp-delay = <6250>;
36 regulator-enable-ramp-delay = <200>;
45 regulator-ramp-delay = <50000>;
46 regulator-enable-ramp-delay = <250>;
54 regulator-ramp-delay = <6250>;
55 regulator-enable-ramp-delay = <200>;
64 regulator-ramp-delay = <6250>;
65 regulator-enable-ramp-delay = <200>;
[all …]
|
| D | mt8173-evb.dts | 127 regulator-ramp-delay = <10000>;
137 regulator-ramp-delay = <10000>;
151 mediatek,hs200-cmd-int-delay=<26>;
152 mediatek,hs400-cmd-int-delay=<14>;
318 regulator-ramp-delay = <12500>;
327 regulator-ramp-delay = <12500>;
328 regulator-enable-ramp-delay = <115>;
336 regulator-ramp-delay = <12500>;
345 regulator-ramp-delay = <12500>;
354 regulator-ramp-delay = <12500>;
[all …]
|
| /Linux-v5.15/tools/time/ |
| D | udelay_test.sh | 24 delay=$1
25 echo $delay > $UDELAY_PATH
42 for (( delay = 1; delay < 200; delay += 1 )); do
43 test_one $delay
45 for (( delay = 200; delay < 500; delay += 10 )); do
46 test_one $delay
48 for (( delay = 500; delay <= 2000; delay += 100 )); do
49 test_one $delay
|
| /Linux-v5.15/Documentation/devicetree/bindings/regulator/ |
| D | mt6358-regulator.txt | 34 regulator-ramp-delay = <12500>;
35 regulator-enable-ramp-delay = <0>;
43 regulator-ramp-delay = <6250>;
44 regulator-enable-ramp-delay = <200>;
52 regulator-ramp-delay = <50000>;
53 regulator-enable-ramp-delay = <250>;
60 regulator-ramp-delay = <6250>;
61 regulator-enable-ramp-delay = <200>;
69 regulator-ramp-delay = <6250>;
70 regulator-enable-ramp-delay = <200>;
[all …]
|
| D | mt6397-regulator.txt | 34 regulator-ramp-delay = <12500>;
35 regulator-enable-ramp-delay = <200>;
43 regulator-ramp-delay = <12500>;
44 regulator-enable-ramp-delay = <115>;
52 regulator-ramp-delay = <12500>;
53 regulator-enable-ramp-delay = <115>;
62 regulator-ramp-delay = <12500>;
63 regulator-enable-ramp-delay = <115>;
72 regulator-ramp-delay = <12500>;
73 regulator-enable-ramp-delay = <115>;
[all …]
|
| D | mt6323-regulator.txt | 27 regulator-ramp-delay = <12500>;
36 regulator-ramp-delay = <25000>;
51 regulator-enable-ramp-delay = <90>;
60 regulator-enable-ramp-delay = <185>;
67 regulator-enable-ramp-delay = <185>;
74 regulator-enable-ramp-delay = <185>;
81 regulator-enable-ramp-delay = <216>;
90 regulator-enable-ramp-delay = <216>;
97 regulator-enable-ramp-delay = <216>;
106 regulator-enable-ramp-delay = <216>;
[all …]
|
| /Linux-v5.15/arch/arm64/boot/dts/qcom/ |
| D | sdm630-sony-xperia-nile.dtsi | 62 startup-delay-us = <0>;
72 startup-delay-us = <0>;
82 startup-delay-us = <0>;
177 syna,reset-delay-ms = <200>;
178 syna,startup-delay-ms = <220>;
255 regulator-enable-ramp-delay = <200>;
256 regulator-ramp-delay = <0>;
262 regulator-enable-ramp-delay = <200>;
263 regulator-ramp-delay = <0>;
280 regulator-enable-ramp-delay = <250>;
[all …]
|
| /Linux-v5.15/arch/arm64/boot/dts/sprd/ |
| D | sc2731.dtsi | 123 regulator-ramp-delay = <25000>;
131 regulator-ramp-delay = <25000>;
139 regulator-ramp-delay = <25000>;
140 regulator-enable-ramp-delay = <100>;
148 regulator-enable-ramp-delay = <100>;
155 regulator-enable-ramp-delay = <100>;
156 regulator-ramp-delay = <25000>;
163 regulator-enable-ramp-delay = <100>;
164 regulator-ramp-delay = <25000>;
171 regulator-enable-ramp-delay = <100>;
[all …]
|
| /Linux-v5.15/arch/arm64/boot/dts/exynos/ |
| D | exynos7-espresso.dts | 86 samsung,i2c-sda-delay = <100>;
112 regulator-enable-ramp-delay = <125>;
120 regulator-enable-ramp-delay = <125>;
129 regulator-enable-ramp-delay = <125>;
137 regulator-enable-ramp-delay = <125>;
145 regulator-enable-ramp-delay = <125>;
152 regulator-enable-ramp-delay = <125>;
159 regulator-enable-ramp-delay = <125>;
167 regulator-enable-ramp-delay = <125>;
174 regulator-enable-ramp-delay = <125>;
[all …]
|
| /Linux-v5.15/arch/arm/boot/dts/ |
| D | mt6323.dtsi | 31 regulator-ramp-delay = <12500>;
40 regulator-ramp-delay = <25000>;
55 regulator-enable-ramp-delay = <90>;
64 regulator-enable-ramp-delay = <185>;
71 regulator-enable-ramp-delay = <185>;
78 regulator-enable-ramp-delay = <185>;
85 regulator-enable-ramp-delay = <216>;
94 regulator-enable-ramp-delay = <216>;
101 regulator-enable-ramp-delay = <216>;
110 regulator-enable-ramp-delay = <216>;
[all …]
|
| D | mt8135-evbp1.dts | 32 regulator-ramp-delay = <12500>;
40 regulator-ramp-delay = <12500>;
48 regulator-ramp-delay = <12500>;
56 regulator-ramp-delay = <12500>;
64 regulator-ramp-delay = <12500>;
72 regulator-ramp-delay = <12500>;
73 regulator-enable-ramp-delay = <115>;
80 regulator-ramp-delay = <12500>;
88 regulator-ramp-delay = <12500>;
106 regulator-enable-ramp-delay = <218>;
[all …]
|
| D | motorola-cpcap-mapphone.dtsi | 155 regulator-enable-ramp-delay = <50000>;
162 regulator-enable-ramp-delay = <1000>;
169 regulator-enable-ramp-delay = <1000>;
176 regulator-enable-ramp-delay = <1000>;
182 regulator-enable-ramp-delay = <1000>;
188 regulator-enable-ramp-delay = <1000>;
194 regulator-enable-ramp-delay = <1000>;
202 regulator-enable-ramp-delay = <1000>;
208 regulator-enable-ramp-delay = <100>;
214 regulator-enable-ramp-delay = <1000>;
[all …]
|
| /Linux-v5.15/arch/arm64/boot/dts/nvidia/ |
| D | tegra210-p2180.dtsi | 115 regulator-enable-ramp-delay = <146>;
116 regulator-ramp-delay = <27500>;
126 regulator-enable-ramp-delay = <130>;
127 regulator-ramp-delay = <27500>;
137 regulator-enable-ramp-delay = <176>;
138 regulator-ramp-delay = <27500>;
150 regulator-enable-ramp-delay = <242>;
151 regulator-ramp-delay = <27500>;
163 regulator-enable-ramp-delay = <26>;
164 regulator-ramp-delay = <100000>;
[all …]
|
| D | tegra210-p3450-0000.dts | 268 regulator-enable-ramp-delay = <146>;
269 regulator-disable-ramp-delay = <4080>;
270 regulator-ramp-delay = <27500>;
271 regulator-ramp-delay-scale = <300>;
284 regulator-enable-ramp-delay = <176>;
285 regulator-disable-ramp-delay = <145800>;
286 regulator-ramp-delay = <27500>;
287 regulator-ramp-delay-scale = <300>;
300 regulator-enable-ramp-delay = <176>;
301 regulator-disable-ramp-delay = <32000>;
[all …]
|
| /Linux-v5.15/Documentation/devicetree/bindings/thermal/ |
| D | brcm,sr-thermal.txt | 11 - polling-delay: Max number of milliseconds to wait between polls.
34 polling-delay-passive = <0>;
35 polling-delay = <1000>;
46 polling-delay-passive = <0>;
47 polling-delay = <1000>;
58 polling-delay-passive = <0>;
59 polling-delay = <1000>;
70 polling-delay-passive = <0>;
71 polling-delay = <1000>;
82 polling-delay-passive = <0>;
[all …]
|
| /Linux-v5.15/Documentation/devicetree/bindings/mmc/ |
| D | sdhci-sprd.txt | 26 PHY DLL delays are used to delay the data valid window, and align the window
29 write line delay value, clock read command line delay value, clock read data
30 positive edge delay value and clock read data negative edge delay value.
31 Each cell's delay value unit is cycle of the PHY clock.
33 - sprd,phy-delay-legacy: Delay value for legacy timing.
34 - sprd,phy-delay-sd-highspeed: Delay value for SD high-speed timing.
35 - sprd,phy-delay-sd-uhs-sdr50: Delay value for SD UHS SDR50 timing.
36 - sprd,phy-delay-sd-uhs-sdr104: Delay value for SD UHS SDR50 timing.
37 - sprd,phy-delay-mmc-highspeed: Delay value for MMC high-speed timing.
38 - sprd,phy-delay-mmc-ddr52: Delay value for MMC DDR52 timing.
[all …]
|
| /Linux-v5.15/drivers/clk/sunxi-ng/ |
| D | ccu_phase.c | 20 u8 delay; in ccu_phase_get_phase() local
23 delay = (reg >> phase->shift); in ccu_phase_get_phase()
24 delay &= (1 << phase->width) - 1; in ccu_phase_get_phase()
26 if (!delay) in ccu_phase_get_phase()
53 return delay * step; in ccu_phase_get_phase()
63 u8 delay; in ccu_phase_set_phase() local
105 delay = DIV_ROUND_CLOSEST(degrees, step); in ccu_phase_set_phase()
107 delay = 0; in ccu_phase_set_phase()
113 writel(reg | (delay << phase->shift), in ccu_phase_set_phase()
|
| /Linux-v5.15/drivers/gpu/drm/i915/gt/ |
| D | intel_engine_heartbeat.c | 25 long delay; in next_heartbeat() local
27 delay = READ_ONCE(engine->props.heartbeat_interval_ms); in next_heartbeat()
28 if (!delay) in next_heartbeat()
31 delay = msecs_to_jiffies_timeout(delay); in next_heartbeat()
32 if (delay >= HZ) in next_heartbeat()
33 delay = round_jiffies_up_relative(delay); in next_heartbeat()
34 mod_delayed_work(system_highpri_wq, &engine->heartbeat.work, delay + 1); in next_heartbeat()
137 long delay = READ_ONCE(engine->props.heartbeat_interval_ms); in heartbeat() local
141 rq->emitted_jiffies + msecs_to_jiffies(delay))) in heartbeat()
269 unsigned long delay) in set_heartbeat() argument
[all …]
|
| /Linux-v5.15/drivers/input/touchscreen/ |
| D | wm9705.c | 63 static int delay = 4; variable
64 module_param(delay, int, 0);
65 MODULE_PARM_DESC(delay, "Set adc sample delay.");
156 if (delay != 4) { in wm9705_phy_init()
157 if (delay < 0 || delay > 15) { in wm9705_phy_init()
159 delay = 4; in wm9705_phy_init()
163 dig1 |= WM97XX_DELAY(delay); in wm9705_phy_init()
165 delay_table[delay]); in wm9705_phy_init()
212 int timeout = 5 * delay; in wm9705_poll_sample()
226 | WM97XX_POLL | WM97XX_DELAY(delay)); in wm9705_poll_sample()
[all …]
|
| D | wm9712.c | 76 static int delay = 3; variable
77 module_param(delay, int, 0);
78 MODULE_PARM_DESC(delay, "Set adc sample delay.");
188 if (delay < 0 || delay > 15) { in wm9712_phy_init()
190 delay = 4; in wm9712_phy_init()
193 dig1 |= WM97XX_DELAY(delay); in wm9712_phy_init()
195 delay_table[delay]); in wm9712_phy_init()
252 int timeout = 5 * delay; in wm9712_poll_sample()
266 | WM97XX_POLL | WM97XX_DELAY(delay)); in wm9712_poll_sample()
269 poll_delay(delay); in wm9712_poll_sample()
[all …]
|
| /Linux-v5.15/drivers/net/wireless/ath/ath9k/ |
| D | rng.c | 62 u32 delay; in ath9k_rng_delay_get() local
65 delay = 10; in ath9k_rng_delay_get()
67 delay = 1000; in ath9k_rng_delay_get()
69 delay = 10000; in ath9k_rng_delay_get()
71 return delay; in ath9k_rng_delay_get()
79 u32 delay, fail_stats = 0; in ath9k_rng_kthread() local
89 delay = ath9k_rng_delay_get(++fail_stats); in ath9k_rng_kthread()
92 msecs_to_jiffies(delay)); in ath9k_rng_kthread()
|
| /Linux-v5.15/Documentation/devicetree/bindings/power/reset/ |
| D | gpio-restart.txt | 14 reset. After a delay specified by active-delay, the GPIO is set to
16 triggered reset. After a delay specified by inactive-delay, the GPIO
17 is driven active again. After a delay specified by wait-delay, the
40 - active-delay: Delay (default 100) to wait after driving gpio active [ms]
41 - inactive-delay: Delay (default 100) to wait after driving gpio inactive [ms]
42 - wait-delay: Delay (default 3000) to wait after completing restart
51 active-delay = <100>;
52 inactive-delay = <100>;
53 wait-delay = <3000>;
|
| /Linux-v5.15/Documentation/accounting/ |
| D | delay-accounting.rst | 9 The per-task delay accounting functionality measures
25 delay statistics aggregated for all tasks (or threads) belonging to a
30 aggregate delay statistics into arbitrary groups. To enable this, delay
41 statistics. The delay accounting functionality populates specific fields of
46 for a description of the fields pertaining to delay accounting.
48 delay seen for cpu, sync block I/O, swapin, memory reclaim etc.
51 counter (say cpu_delay_total) for a task will give the delay
61 commands to be run and the corresponding delay statistics to be displayed. It
104 CPU count real total virtual total delay total
106 IO count delay total
[all …]
|
| /Linux-v5.15/arch/arm64/boot/dts/ti/ |
| D | k3-am654-industrial-thermal.dtsi | 6 polling-delay-passive = <250>; /* milliseconds */
7 polling-delay = <500>; /* milliseconds */
20 polling-delay-passive = <250>; /* milliseconds */
21 polling-delay = <500>; /* milliseconds */
34 polling-delay-passive = <250>; /* milliseconds */
35 polling-delay = <500>; /* milliseconds */
|
| /Linux-v5.15/drivers/hwmon/pmbus/ |
| D | max15301.c | 35 int delay; /* Delay between chip accesses in us */ member
43 static ushort delay = MAX15301_WAIT_TIME; variable
44 module_param(delay, ushort, 0644);
45 MODULE_PARM_DESC(delay, "Delay between chip accesses in us");
61 if (data->delay) { in max15301_wait()
64 if (delta < data->delay) in max15301_wait()
65 udelay(data->delay - delta); in max15301_wait()
167 max15301_data.delay = delay; in max15301_probe()
|
