/Linux-v5.10/Documentation/devicetree/bindings/opp/ |
D | qcom-nvmem-cpufreq.txt | 157 opp-supported-hw = <0x70>; 169 opp-supported-hw = <0x70>; 181 opp-supported-hw = <0x70>; 193 opp-supported-hw = <0x70>; 205 opp-supported-hw = <0x70>; 217 opp-supported-hw = <0x70>; 229 opp-supported-hw = <0x70>; 241 opp-supported-hw = <0x70>; 253 opp-supported-hw = <0x70>; 265 opp-supported-hw = <0x70>; [all …]
|
/Linux-v5.10/drivers/net/wan/ |
D | wanxlfw.inc_shipped | 8 0x21,0xFC,0x00,0x00,0x16,0xFE,0x01,0x74,0x21,0xFC,0x00,0x00,0x17,0x1E,0x01,0x70, 25 0xFF,0x92,0x20,0x70,0x09,0xB0,0x00,0x00,0x10,0x04,0x4A,0xA8,0x00,0x00,0x66,0x00, 31 0x82,0xB0,0x09,0xB0,0x00,0x00,0x18,0xD2,0x23,0xC1,0xFF,0xFC,0x16,0xEC,0x00,0x70, 33 0x00,0x00,0x18,0x92,0x22,0x70,0x09,0xB0,0x00,0x00,0x18,0x72,0x74,0x08,0x26,0x3C, 38 0xB0,0x00,0x00,0x00,0x22,0xC1,0x22,0x70,0x09,0xB0,0x00,0x00,0x18,0x62,0x24,0x70, 56 0x23,0x7C,0x00,0x00,0xFF,0xFF,0x00,0x38,0x33,0x7C,0x05,0xF8,0x00,0x46,0x42,0x70, 63 0x20,0x70,0x09,0xB0,0x00,0x00,0x18,0x52,0x42,0x68,0x00,0x14,0x02,0xA8,0xFF,0xFF, 64 0xFF,0xCF,0x00,0x00,0x02,0x70,0xEF,0xFF,0x09,0xB0,0x00,0x00,0x19,0xAA,0x61,0x00, 65 0x03,0x70,0x22,0x30,0x09,0xB0,0x00,0x00,0x10,0x04,0x42,0xB0,0x19,0x90,0x4E,0x75, 69 0x0C,0xB0,0x00,0x00,0x00,0x10,0x29,0x90,0x66,0x00,0x00,0x7C,0x20,0x70,0x29,0xA0, [all …]
|
/Linux-v5.10/Documentation/firmware-guide/acpi/ |
D | i2c-muxes.rst | 14 | | | 0x70 |--CH01--> i2c client B (0x50) 26 I2cSerialBus (0x70, ControllerInitiated, I2C_SPEED,
|
/Linux-v5.10/arch/arm/boot/dts/ |
D | imx7d-mba7.dts | 80 MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30 0x70 82 MX7D_PAD_SD2_CLK__GPIO5_IO12 0x70 84 MX7D_PAD_EPDC_BDR1__GPIO2_IO29 0x70
|
D | aspeed-bmc-facebook-minipack.dts | 191 reg = <0x70>; 271 reg = <0x70>; 330 reg = <0x70>; 393 reg = <0x70>;
|
D | aspeed-bmc-facebook-cmm.dts | 348 reg = <0x70>; 453 reg = <0x70>; 558 reg = <0x70>; 663 reg = <0x70>; 768 reg = <0x70>; 873 reg = <0x70>; 978 reg = <0x70>; 1083 reg = <0x70>; 1301 reg = <0x70>; 1357 reg = <0x70>; [all …]
|
D | bcm21664.dtsi | 160 reg = <0x3e016000 0x70>; 170 reg = <0x3e017000 0x70>; 180 reg = <0x3e018000 0x70>; 190 reg = <0x3e01c000 0x70>;
|
D | imx6qdl-udoo.dtsi | 174 MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x70 175 MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x70 187 MX6QDL_PAD_SD2_DAT0__GPIO1_IO15 0x70
|
D | aspeed-bmc-opp-mihawk.dts | 628 reg = <0x70>; 648 reg = <0x70>; 667 reg = <0x70>; 729 reg = <0x70>; 813 reg = <0x70>; 978 reg = <0x70>; 1173 reg = <0x70>; 1238 reg = <0x70>;
|
D | mmp3.dtsi | 438 reg = <0xd4011000 0x70>; 450 reg = <0xd4031000 0x70>; 462 reg = <0xd4032000 0x70>; 474 reg = <0xd4033000 0x70>; 487 reg = <0xd4033800 0x70>; 499 reg = <0xd4034000 0x70>;
|
D | bcm23550.dtsi | 163 reg = <0x00016000 0x70>; 173 reg = <0x00017000 0x70>; 183 reg = <0x00018000 0x70>; 193 reg = <0x0001c000 0x70>;
|
/Linux-v5.10/drivers/scsi/aic7xxx/ |
D | aic7xxx_seq.h_shipped | 22 0x00, 0x4c, 0x12, 0x70, 31 0x00, 0xbb, 0x30, 0x70, 143 0xe4, 0x6a, 0x70, 0x5d, 151 0xe4, 0x6a, 0x70, 0x5d, 171 0xe4, 0x6a, 0x70, 0x5d, 185 0xc4, 0x6a, 0x70, 0x5d, 191 0x84, 0x6a, 0x70, 0x5d, 211 0x04, 0xaa, 0x70, 0x5d, 213 0xc4, 0x6a, 0x70, 0x5d, 303 0x01, 0x64, 0x70, 0x30, [all …]
|
D | aic7xxx_reg_print.c_shipped | 79 { "SXFR", 0x70, 0x70 } 280 0x70, regvalue, cur_col, wrap)); 384 { "TWIN_TID", 0x70, 0x70 },
|
D | aic7xxx_reg.h_shipped | 124 ahc_print_register(NULL, 0, "SRAM_BASE", 0x70, regvalue, cur_col, wrap) 232 #define SXFR 0x70 584 #define TARG_OFFSET 0x70 586 #define SRAM_BASE 0x70 769 #define TWIN_TID 0x70 848 #define WR_DFTHRSH 0x70 849 #define WR_DFTHRSH_MAX 0x70
|
/Linux-v5.10/Documentation/devicetree/bindings/i2c/ |
D | i2c-mux.txt | 38 An NXP pca9548 8 channel I2C multiplexer at address 0x70 45 reg = <0x70>;
|
D | i2c-mux-reg.txt | 57 reg = <0x70>; 70 reg = <0x70>;
|
/Linux-v5.10/Documentation/hwmon/ |
D | ir35221.rst | 29 at address 0x70 on I2C bus #4:: 32 # echo ir35221 0x70 > /sys/bus/i2c/devices/i2c-4/new_device
|
D | pxe1610.rst | 62 at address 0x70 on I2C bus #4:: 65 # echo pxe1610 0x70 > /sys/bus/i2c/devices/i2c-4/new_device
|
/Linux-v5.10/arch/mips/boot/dts/loongson/ |
D | rs780e-pch.dtsi | 32 reg = <1 0x70 0x8>;
|
/Linux-v5.10/Documentation/devicetree/bindings/interrupt-controller/ |
D | mscc,ocelot-icpu-intr.txt | 16 reg = <0x70000070 0x70>;
|
/Linux-v5.10/Documentation/devicetree/bindings/rtc/ |
D | rtc-cmos.txt | 26 reg = <1 0x70 2>;
|
/Linux-v5.10/Documentation/devicetree/bindings/reset/ |
D | nuvoton,npcm-reset.txt | 17 reg = <0xf0801000 0x70>;
|
/Linux-v5.10/Documentation/admin-guide/ |
D | bug-hunting.rst | 7 WARNING: CPU: 1 PID: 28102 at kernel/module.c:1108 module_put+0x57/0x70 17 [<c109e8a7>] ? module_put+0x57/0x70 18 [<c109e8a7>] ? module_put+0x57/0x70 20 [<c109e8a7>] ? module_put+0x57/0x70 23 [<f80bc9ca>] ? dvb_usb_adapter_frontend_exit+0x3a/0x70 [dvb_usb] 28 [<c136b514>] ? __pm_runtime_idle+0x44/0x70 183 [<f80bc9ca>] ? dvb_usb_adapter_frontend_exit+0x3a/0x70 [dvb_usb]
|
/Linux-v5.10/arch/mips/boot/dts/mscc/ |
D | ocelot.dtsi | 61 reg = <0x70 0x70>;
|
/Linux-v5.10/Documentation/devicetree/bindings/display/ |
D | ht16k33.txt | 22 reg = <0x70>;
|