/Linux-v5.10/drivers/clocksource/ |
D | sh_tmu.c | 39 struct sh_tmu_device *tmu; member 89 switch (ch->tmu->model) { in sh_tmu_read() 91 return ioread8(ch->tmu->mapbase + 2); in sh_tmu_read() 93 return ioread8(ch->tmu->mapbase + 4); in sh_tmu_read() 111 switch (ch->tmu->model) { in sh_tmu_write() 113 return iowrite8(value, ch->tmu->mapbase + 2); in sh_tmu_write() 115 return iowrite8(value, ch->tmu->mapbase + 4); in sh_tmu_write() 132 raw_spin_lock_irqsave(&ch->tmu->lock, flags); in sh_tmu_start_stop_ch() 141 raw_spin_unlock_irqrestore(&ch->tmu->lock, flags); in sh_tmu_start_stop_ch() 149 ret = clk_enable(ch->tmu->clk); in __sh_tmu_enable() [all …]
|
/Linux-v5.10/drivers/thermal/ |
D | imx8mm_thermal.c | 63 struct imx8mm_tmu *tmu = sensor->priv; in imx8mm_tmu_get_temp() local 66 val = readl_relaxed(tmu->base + TRITSR) & TRITSR_TEMP0_VAL_MASK; in imx8mm_tmu_get_temp() 77 struct imx8mm_tmu *tmu = sensor->priv; in imx8mp_tmu_get_temp() local 81 val = readl_relaxed(tmu->base + TRITSR); in imx8mp_tmu_get_temp() 101 struct imx8mm_tmu *tmu = sensor->priv; in tmu_get_temp() local 103 return tmu->socdata->get_temp(data, temp); in tmu_get_temp() 110 static void imx8mm_tmu_enable(struct imx8mm_tmu *tmu, bool enable) in imx8mm_tmu_enable() argument 114 val = readl_relaxed(tmu->base + TER); in imx8mm_tmu_enable() 116 writel_relaxed(val, tmu->base + TER); in imx8mm_tmu_enable() 119 static void imx8mm_tmu_probe_sel_all(struct imx8mm_tmu *tmu) in imx8mm_tmu_probe_sel_all() argument [all …]
|
/Linux-v5.10/drivers/thunderbolt/ |
D | tmu.c | 18 switch (sw->tmu.rate) { in tb_switch_tmu_mode_name() 26 if (sw->tmu.unidirectional) in tb_switch_tmu_mode_name() 46 sw->tmu.cap + TMU_RTR_CS_0, 1); in tb_switch_tmu_ucap_supported() 59 sw->tmu.cap + TMU_RTR_CS_3, 1); in tb_switch_tmu_rate_read() 73 sw->tmu.cap + TMU_RTR_CS_3, 1); in tb_switch_tmu_rate_write() 81 sw->tmu.cap + TMU_RTR_CS_3, 1); in tb_switch_tmu_rate_write() 106 if (!port->sw->tmu.has_ucap) in tb_port_tmu_set_unidirectional() 137 sw->tmu.cap + TMU_RTR_CS_0, 1); in tb_switch_tmu_set_time_disruption() 147 sw->tmu.cap + TMU_RTR_CS_0, 1); in tb_switch_tmu_set_time_disruption() 168 sw->tmu.cap = ret; in tb_switch_tmu_init() [all …]
|
D | Makefile | 4 thunderbolt-objs += domain.o dma_port.o icm.o property.o xdomain.o lc.o tmu.o usb4.o
|
/Linux-v5.10/Documentation/devicetree/bindings/thermal/ |
D | exynos-thermal.txt | 6 "samsung,exynos3250-tmu" 7 "samsung,exynos4412-tmu" 8 "samsung,exynos4210-tmu" 9 "samsung,exynos5250-tmu" 10 "samsung,exynos5260-tmu" 11 "samsung,exynos5420-tmu" for TMU channel 0, 1 on Exynos5420 12 "samsung,exynos5420-tmu-ext-triminfo" for TMU channels 2, 3 and 4 14 "samsung,exynos5433-tmu" 15 "samsung,exynos7-tmu" 24 Use "samsung,exynos5420-tmu-ext-triminfo" in cases, there is a misplaced [all …]
|
/Linux-v5.10/Documentation/devicetree/bindings/timer/ |
D | renesas,tmu.txt | 12 - "renesas,tmu-r8a7740" for the r8a7740 TMU 13 - "renesas,tmu-r8a774a1" for the r8a774A1 TMU 14 - "renesas,tmu-r8a774b1" for the r8a774B1 TMU 15 - "renesas,tmu-r8a774c0" for the r8a774C0 TMU 16 - "renesas,tmu-r8a7778" for the r8a7778 TMU 17 - "renesas,tmu-r8a7779" for the r8a7779 TMU 18 - "renesas,tmu-r8a77970" for the r8a77970 TMU 19 - "renesas,tmu-r8a77980" for the r8a77980 TMU 20 - "renesas,tmu" for any TMU. 21 This is a fallback for the above renesas,tmu-* entries [all …]
|
/Linux-v5.10/drivers/gpu/drm/vc4/ |
D | vc4_validate_shaders.c | 157 int tmu) in record_texture_sample() argument 170 &validation_state->tmu_setup[tmu], in record_texture_sample() 177 validation_state->tmu_setup[tmu].p_offset[i] = ~0; in record_texture_sample() 193 int tmu = waddr > QPU_W_TMU0_B; in check_tmu_write() local 195 bool is_direct = submit && validation_state->tmu_write_count[tmu] == 0; in check_tmu_write() 236 validation_state->tmu_setup[tmu].p_offset[1] = in check_tmu_write() 245 validation_state->tmu_setup[tmu].is_direct = true; in check_tmu_write() 255 if (validation_state->tmu_write_count[tmu] >= 4) { in check_tmu_write() 257 tmu); in check_tmu_write() 260 validation_state->tmu_setup[tmu].p_offset[validation_state->tmu_write_count[tmu]] = in check_tmu_write() [all …]
|
/Linux-v5.10/arch/arm/boot/dts/ |
D | exynos5410.dtsi | 90 tmu_cpu0: tmu@10060000 { 91 compatible = "samsung,exynos5420-tmu"; 99 tmu_cpu1: tmu@10064000 { 100 compatible = "samsung,exynos5420-tmu"; 108 tmu_cpu2: tmu@10068000 { 109 compatible = "samsung,exynos5420-tmu"; 117 tmu_cpu3: tmu@1006c000 { 118 compatible = "samsung,exynos5420-tmu";
|
D | exynos4-cpu-thermal.dtsi | 13 thermal-sensors = <&tmu 0>;
|
D | r8a7779.dtsi | 335 compatible = "renesas,tmu-r8a7779", "renesas,tmu"; 350 compatible = "renesas,tmu-r8a7779", "renesas,tmu"; 365 compatible = "renesas,tmu-r8a7779", "renesas,tmu";
|
D | r8a7778.dtsi | 195 compatible = "renesas,tmu-r8a7778", "renesas,tmu"; 210 compatible = "renesas,tmu-r8a7778", "renesas,tmu"; 225 compatible = "renesas,tmu-r8a7778", "renesas,tmu";
|
D | exynos5420.dtsi | 848 tmu_cpu0: tmu@10060000 { 849 compatible = "samsung,exynos5420-tmu"; 857 tmu_cpu1: tmu@10064000 { 858 compatible = "samsung,exynos5420-tmu"; 866 tmu_cpu2: tmu@10068000 { 867 compatible = "samsung,exynos5420-tmu-ext-triminfo"; 875 tmu_cpu3: tmu@1006c000 { 876 compatible = "samsung,exynos5420-tmu-ext-triminfo"; 884 tmu_gpu: tmu@100a0000 { 885 compatible = "samsung,exynos5420-tmu-ext-triminfo";
|
/Linux-v5.10/arch/arm64/boot/dts/freescale/ |
D | fsl-ls208xa.dtsi | 85 thermal-sensors = <&tmu 1>; 99 thermal-sensors = <&tmu 2>; 113 thermal-sensors = <&tmu 3>; 127 thermal-sensors = <&tmu 4>; 156 thermal-sensors = <&tmu 5>; 185 thermal-sensors = <&tmu 6>; 214 thermal-sensors = <&tmu 7>; 280 tmu: tmu@1f80000 { label 281 compatible = "fsl,qoriq-tmu"; 284 fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x30062>; [all …]
|
D | fsl-ls1046a.dtsi | 124 thermal-sensors = <&tmu 0>; 144 thermal-sensors = <&tmu 1>; 164 thermal-sensors = <&tmu 2>; 184 thermal-sensors = <&tmu 3>; 215 thermal-sensors = <&tmu 4>; 399 tmu: tmu@1f00000 { label 400 compatible = "fsl,qoriq-tmu"; 403 fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x30062>; 404 fsl,tmu-calibration =
|
D | fsl-ls1043a.dtsi | 156 thermal-sensors = <&tmu 0>; 176 thermal-sensors = <&tmu 1>; 196 thermal-sensors = <&tmu 2>; 216 thermal-sensors = <&tmu 3>; 247 thermal-sensors = <&tmu 4>; 402 tmu: tmu@1f00000 { label 403 compatible = "fsl,qoriq-tmu"; 406 fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x30062>; 407 fsl,tmu-calibration = <0x00000000 0x00000026
|
D | fsl-ls1012a.dtsi | 109 thermal-sensors = <&tmu 0>; 290 tmu: tmu@1f00000 { label 291 compatible = "fsl,qoriq-tmu"; 294 fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x30062>; 295 fsl,tmu-calibration = <0x00000000 0x00000026
|
D | fsl-lx2160a.dtsi | 446 thermal-sensors = <&tmu 0>; 489 thermal-sensors = <&tmu 1>; 509 thermal-sensors = <&tmu 2>; 529 thermal-sensors = <&tmu 3>; 549 thermal-sensors = <&tmu 4>; 569 thermal-sensors = <&tmu 5>; 589 thermal-sensors = <&tmu 6>; 667 tmu: tmu@1f80000 { label 668 compatible = "fsl,qoriq-tmu"; 671 fsl,tmu-range = <0x800000e6 0x8001017d>; [all …]
|
D | fsl-ls1088a.dtsi | 136 thermal-sensors = <&tmu 0>; 171 thermal-sensors = <&tmu 1>; 223 tmu: tmu@1f80000 { label 224 compatible = "fsl,qoriq-tmu"; 227 fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x70062>; 228 fsl,tmu-calibration =
|
D | imx8mp.dtsi | 145 thermal-sensors = <&tmu 0>; 175 thermal-sensors = <&tmu 1>; 291 tmu: tmu@30260000 { label 292 compatible = "fsl,imx8mp-tmu";
|
/Linux-v5.10/arch/powerpc/boot/dts/fsl/ |
D | t1023si-post.dtsi | 365 tmu: tmu@f0000 { label 366 compatible = "fsl,qoriq-tmu"; 369 fsl,tmu-range = <0xb0000 0xa0026 0x80048 0x30061>; 370 fsl,tmu-calibration = <0x00000000 0x0000000f 417 thermal-sensors = <&tmu 0>;
|
D | t1040si-post.dtsi | 445 tmu: tmu@f0000 { label 446 compatible = "fsl,qoriq-tmu"; 449 fsl,tmu-range = <0xa0000 0x90026 0x8004a 0x1006a>; 450 fsl,tmu-calibration = <0x00000000 0x00000025 493 thermal-sensors = <&tmu 2>;
|
/Linux-v5.10/arch/arm64/boot/dts/renesas/ |
D | r8a77970.dtsi | 333 compatible = "renesas,tmu-r8a77970", "renesas,tmu"; 346 compatible = "renesas,tmu-r8a77970", "renesas,tmu"; 359 compatible = "renesas,tmu-r8a77970", "renesas,tmu"; 372 compatible = "renesas,tmu-r8a77970", "renesas,tmu"; 385 compatible = "renesas,tmu-r8a77970", "renesas,tmu";
|
D | r8a77980.dtsi | 363 compatible = "renesas,tmu-r8a77980", "renesas,tmu"; 376 compatible = "renesas,tmu-r8a77980", "renesas,tmu"; 389 compatible = "renesas,tmu-r8a77980", "renesas,tmu"; 402 compatible = "renesas,tmu-r8a77980", "renesas,tmu"; 415 compatible = "renesas,tmu-r8a77980", "renesas,tmu";
|
/Linux-v5.10/arch/arm64/boot/dts/exynos/ |
D | exynos5433.dtsi | 651 tmu_atlas0: tmu@10060000 { 652 compatible = "samsung,exynos5433-tmu"; 662 tmu_atlas1: tmu@10068000 { 663 compatible = "samsung,exynos5433-tmu"; 673 tmu_g3d: tmu@10070000 { 674 compatible = "samsung,exynos5433-tmu"; 684 tmu_apollo: tmu@10078000 { 685 compatible = "samsung,exynos5433-tmu"; 695 tmu_isp: tmu@1007c000 { 696 compatible = "samsung,exynos5433-tmu"; [all …]
|
/Linux-v5.10/Documentation/devicetree/bindings/hwmon/ |
D | pwm-fan.txt | 31 thermal-sensors = <&tmu 0>;
|