Searched refs:hooked (Results 1 – 25 of 50) sorted by relevance
12
22 Say Y here if you have ADE7854/58/68/78 hooked to an I2C bus.32 Say Y here if you have ADE7854/58/68/78 hooked to a SPI bus.
4 is hooked up to a pull-up GPIO line and - optionally - the HPD line is5 hooked up to another GPIO line.
66 has address 0.0.0.0. Every device that is hooked up to an input of the67 TV has address a.0.0.0 (where 'a' is ≥ 1), devices hooked up to those in
9 - If the regulator hooked up to a pin like SDMMC0_VDD is 3.3V then10 bit 7 of GRF_IO_VSEL needs to be 0. If the regulator hooked up to15 hooked up to the pins.
17 is hooked to a parent interrupt controller: e.g: ARM GIC for ARM-based
4 is hooked to a parent interrupt controller: e.g: ARM GIC for ARM-based
38 /* Not hooked up */
303 dr_mode = "host"; /* Force to host until we have Type-C hooked up */
371 dr_mode = "host"; /* Force to host until we have Type-C hooked up */
34 * Builtin CD line is hooked to ground to prevent JTAG at boot
166 * NOTE: vcc_sd isn't hooked up on v1.0 boards where power comes from229 disable-wp; /* wp not hooked up */
64 /* The lcd panel i2c interface is hooked up via gpios */
62 /* The lcd panel i2c interface is hooked up via gpios */
150 disable-wp; /* wp not hooked up */
139 disable-wp; /* wp not hooked up */
6 various security checks to be hooked by new kernel extensions. The name
69 These are all hooked together by the machine driver depending on the
13 device LEDs should be exposed as LED class devices and hooked up to the
61 Say Y here if you have AD7142/AD7147 hooked to an I2C bus.71 Say Y here if you have AD7142/AD7147 hooked to a SPI bus.105 acceleration sensor hooked to an I2C bus.696 Say Y here if you have ADXL345/6 hooked to an I2C bus.706 Say Y here if you have ADXL345/6 hooked to a SPI bus.
88 are hooked to this driver through platform_data structure.
512 * hooked to ground. Because we specified "cd-gpios" below dw_mmc756 * In our case the official card detect is hooked to ground
20 hooked up to e.g. HDMI connectors. Even though the subdevice will
75 Those types of devices require different approach to be hooked into Linux kernel.
61 wired such that the EHCI debug controller is hooked up to the
180 - RESET: Used by I2C-HID, not hooked up in HID core.181 - SET_POWER: Used by I2C-HID, not hooked up in HID core.
