| /Linux-v5.10/sound/soc/sof/intel/ |
| D | Kconfig | 18 'select' statements at a higher level
34 'select' statements at a higher level
40 'select' statements at a higher level
48 'select' statements at a higher level
58 'select' statements at a higher level
83 'select' statements at a higher level
107 'select' statements at a higher level
126 'select' statements at a higher level
141 'select' statements at a higher level
156 'select' statements at a higher level
[all …]
|
| /Linux-v5.10/Documentation/userspace-api/media/dvb/ |
| D | fe-enable-high-lnb-voltage.rst | 13 FE_ENABLE_HIGH_LNB_VOLTAGE - Select output DC level between normal LNBf voltages or higher LNBf - v…
33 - >0 - enables slightly higher voltages instead of 13/18V, in order
39 Select output DC level between normal LNBf voltages or higher LNBf
40 voltages between 0 (normal) or a value grater than 0 for higher
|
| /Linux-v5.10/sound/soc/sof/imx/ |
| D | Kconfig | 20 'select' statements at a higher level
26 'select' statements at a higher level.
43 'select' statements at a higher level
59 'select' statements at a higher level
|
| /Linux-v5.10/Documentation/devicetree/bindings/display/ |
| D | ssd1307fb.txt | 29 This needs to be the higher, the higher the capacitance
32 - solomon,dclk-frq: Clock frequency 0 to 15, higher value means higher
|
| /Linux-v5.10/arch/arm/boot/dts/ |
| D | kirkwood-rd88f6281-a.dts | 8 * higher stepping of the SoC. The ethernet switch does not have a
16 model = "Marvell RD88f6281 Reference design, with A0 or higher SoC";
|
| D | exynos4412-prime.dtsi | 10 * Exynos4412 Prime SoC revision supports higher CPU frequencies than
|
| /Linux-v5.10/arch/powerpc/platforms/maple/ |
| D | pci.c | 35 static int __init fixup_one_level_bus_range(struct device_node *node, int higher) in fixup_one_level_bus_range() argument
49 if (bus_range[1] > higher) in fixup_one_level_bus_range()
50 higher = bus_range[1]; in fixup_one_level_bus_range()
52 higher = fixup_one_level_bus_range(node->child, higher); in fixup_one_level_bus_range()
54 return higher; in fixup_one_level_bus_range()
|
| /Linux-v5.10/net/lapb/ |
| D | Kconfig | 12 it is used to transport higher level protocols (mostly X.25 Packet
13 Layer, the higher part of X.25, but others are possible as well).
|
| /Linux-v5.10/arch/x86/power/ |
| D | hibernate_asm_32.S | 55 jecxz 1f # cr4 Pentium and higher, skip if zero
89 jecxz 1f # cr4 Pentium and higher, skip if zero
|
| /Linux-v5.10/Documentation/devicetree/bindings/regulator/ |
| D | nvidia,tegra-regulators-coupling.txt | 13 and they both shall be higher than the CPU voltage by at least 120mV.
20 voltage shall be higher than the CPU by N mV, where N depends on the CPU
|
| D | mcp16502-regulator.txt | 22 2 - FPWM: higher precision, higher consumption
|
| /Linux-v5.10/Documentation/hwmon/ |
| D | nct6775.rst | 109 configuration. An alarm is triggered when the temperature gets higher than
201 speed increases (if temperature is higher that desired) or decreases (if
246 points should be set to higher temperatures and higher pwm values to achieve
247 higher fan speeds with increasing temperature. The last data point reflects
|
| D | adt7462.rst | 65 - point2: Set the pwm speed at a higher temperature bound.
67 The ADT7462 will scale the pwm between the lower and higher pwm speed when
|
| D | adt7470.rst | 64 - point2: Set the pwm speed at a higher temperature bound.
66 The ADT7470 will scale the pwm between the lower and higher pwm speed when
|
| /Linux-v5.10/arch/arc/ |
| D | Kconfig.debug | 10 on the VM subsystem for higher order allocations.
|
| /Linux-v5.10/Documentation/filesystems/ |
| D | ecryptfs.rst | 28 1.0 or higher), obtainable from
79 then behavior is undefined. Do not run eCryptfs in higher verbosity
|
| /Linux-v5.10/arch/powerpc/platforms/powermac/ |
| D | pci.c | 59 static int __init fixup_one_level_bus_range(struct device_node *node, int higher) in fixup_one_level_bus_range() argument
73 if (bus_range[1] > higher) in fixup_one_level_bus_range()
74 higher = bus_range[1]; in fixup_one_level_bus_range()
76 higher = fixup_one_level_bus_range(node->child, higher); in fixup_one_level_bus_range()
78 return higher; in fixup_one_level_bus_range()
|
| /Linux-v5.10/Documentation/driver-api/80211/ |
| D | introduction.rst | 13 higher-level overview.
|
| /Linux-v5.10/Documentation/ABI/testing/ |
| D | sysfs-driver-xen-blkfront | 8 is 32 - higher value means more potential throughput but more
|
| D | sysfs-platform-hidma-mgmt | 64 Choosing a higher number gives better performance but
85 Choosing a higher number gives better performance but
|
| /Linux-v5.10/Documentation/vm/ |
| D | zsmalloc.rst | 9 never attempts higher order page allocation which is very likely to
17 pages act as a single higher-order page i.e. an object can span 0-order
|
| /Linux-v5.10/Documentation/devicetree/bindings/thermal/ |
| D | nvidia,tegra124-soctherm.txt | 42 Bigger value indicates higher priority, In general, higher priority
44 thermal alarms are given higher priority, and ensure that there is
99 temperature. Once the the temperature of this thermal zone is higher
|
| /Linux-v5.10/Documentation/admin-guide/mm/ |
| D | numaperf.rst | 105 slower performing memory cached by a smaller higher performing memory. The
108 higher performing memory to transparently cache access to progressively
112 hierarchy. Each increasing cache level provides higher performing
119 level memory, so the higher numbered cache level corresponds to memory
|
| /Linux-v5.10/tools/testing/selftests/powerpc/include/ |
| D | basic_asm.h | 10 ori reg, reg, (expr)@higher; \
|
| /Linux-v5.10/Documentation/devicetree/bindings/sound/ |
| D | da7219.txt | 46 - dlg,micbias-pulse-lvl : Mic bias higher voltage pulse level (mV).
48 - dlg,micbias-pulse-time : Mic bias higher voltage pulse duration (ms)
|
