1 /* SPDX-License-Identifier: GPL-2.0 */
2 /*
3  * This file function prototypes, data structure
4  * and  definitions for all the host/station commands
5  */
6 
7 #ifndef _LBS_HOST_H_
8 #define _LBS_HOST_H_
9 
10 #include "types.h"
11 #include "defs.h"
12 
13 #define DEFAULT_AD_HOC_CHANNEL                  6
14 
15 #define CMD_OPTION_WAITFORRSP                   0x0002
16 
17 /* Host command IDs */
18 
19 /*
20  * Return command are almost always the same as the host command, but with
21  * bit 15 set high.  There are a few exceptions, though...
22  */
23 #define CMD_RET(cmd)                            (0x8000 | cmd)
24 
25 /* Return command convention exceptions: */
26 #define CMD_RET_802_11_ASSOCIATE                0x8012
27 
28 /* Command codes */
29 #define CMD_GET_HW_SPEC                         0x0003
30 #define CMD_EEPROM_UPDATE                       0x0004
31 #define CMD_802_11_RESET                        0x0005
32 #define CMD_802_11_SCAN                         0x0006
33 #define CMD_802_11_GET_LOG                      0x000b
34 #define CMD_MAC_MULTICAST_ADR                   0x0010
35 #define CMD_802_11_AUTHENTICATE                 0x0011
36 #define CMD_802_11_EEPROM_ACCESS                0x0059
37 #define CMD_802_11_ASSOCIATE                    0x0050
38 #define CMD_802_11_SET_WEP                      0x0013
39 #define CMD_802_11_GET_STAT                     0x0014
40 #define CMD_802_3_GET_STAT                      0x0015
41 #define CMD_802_11_SNMP_MIB                     0x0016
42 #define CMD_MAC_REG_MAP                         0x0017
43 #define CMD_BBP_REG_MAP                         0x0018
44 #define CMD_MAC_REG_ACCESS                      0x0019
45 #define CMD_BBP_REG_ACCESS                      0x001a
46 #define CMD_RF_REG_ACCESS                       0x001b
47 #define CMD_802_11_RADIO_CONTROL                0x001c
48 #define CMD_802_11_RF_CHANNEL                   0x001d
49 #define CMD_802_11_RF_TX_POWER                  0x001e
50 #define CMD_802_11_RSSI                         0x001f
51 #define CMD_802_11_RF_ANTENNA                   0x0020
52 #define CMD_802_11_PS_MODE                      0x0021
53 #define CMD_802_11_DATA_RATE                    0x0022
54 #define CMD_RF_REG_MAP                          0x0023
55 #define CMD_802_11_DEAUTHENTICATE               0x0024
56 #define CMD_802_11_REASSOCIATE                  0x0025
57 #define CMD_MAC_CONTROL                         0x0028
58 #define CMD_802_11_AD_HOC_START                 0x002b
59 #define CMD_802_11_AD_HOC_JOIN                  0x002c
60 #define CMD_802_11_QUERY_TKIP_REPLY_CNTRS       0x002e
61 #define CMD_802_11_ENABLE_RSN                   0x002f
62 #define CMD_802_11_SET_AFC                      0x003c
63 #define CMD_802_11_GET_AFC                      0x003d
64 #define CMD_802_11_DEEP_SLEEP                   0x003e
65 #define CMD_802_11_AD_HOC_STOP                  0x0040
66 #define CMD_802_11_HOST_SLEEP_CFG               0x0043
67 #define CMD_802_11_WAKEUP_CONFIRM               0x0044
68 #define CMD_802_11_HOST_SLEEP_ACTIVATE          0x0045
69 #define CMD_802_11_BEACON_STOP                  0x0049
70 #define CMD_802_11_MAC_ADDRESS                  0x004d
71 #define CMD_802_11_LED_GPIO_CTRL                0x004e
72 #define CMD_802_11_BAND_CONFIG                  0x0058
73 #define CMD_GSPI_BUS_CONFIG                     0x005a
74 #define CMD_802_11D_DOMAIN_INFO                 0x005b
75 #define CMD_802_11_KEY_MATERIAL                 0x005e
76 #define CMD_802_11_SLEEP_PARAMS                 0x0066
77 #define CMD_802_11_INACTIVITY_TIMEOUT           0x0067
78 #define CMD_802_11_SLEEP_PERIOD                 0x0068
79 #define CMD_802_11_TPC_CFG                      0x0072
80 #define CMD_802_11_PA_CFG                       0x0073
81 #define CMD_802_11_FW_WAKE_METHOD               0x0074
82 #define CMD_802_11_SUBSCRIBE_EVENT              0x0075
83 #define CMD_802_11_RATE_ADAPT_RATESET           0x0076
84 #define CMD_802_11_TX_RATE_QUERY                0x007f
85 #define CMD_GET_TSF                             0x0080
86 #define CMD_BT_ACCESS                           0x0087
87 #define CMD_FWT_ACCESS                          0x0095
88 #define CMD_802_11_MONITOR_MODE                 0x0098
89 #define CMD_MESH_ACCESS                         0x009b
90 #define CMD_MESH_CONFIG_OLD                     0x00a3
91 #define CMD_MESH_CONFIG                         0x00ac
92 #define CMD_SET_BOOT2_VER                       0x00a5
93 #define CMD_FUNC_INIT                           0x00a9
94 #define CMD_FUNC_SHUTDOWN                       0x00aa
95 #define CMD_802_11_BEACON_CTRL                  0x00b0
96 
97 /* For the IEEE Power Save */
98 #define PS_MODE_ACTION_ENTER_PS                 0x0030
99 #define PS_MODE_ACTION_EXIT_PS                  0x0031
100 #define PS_MODE_ACTION_SLEEP_CONFIRMED          0x0034
101 
102 #define CMD_ENABLE_RSN                          0x0001
103 #define CMD_DISABLE_RSN                         0x0000
104 
105 #define CMD_ACT_GET                             0x0000
106 #define CMD_ACT_SET                             0x0001
107 
108 /* Define action or option for CMD_802_11_SET_WEP */
109 #define CMD_ACT_ADD                             0x0002
110 #define CMD_ACT_REMOVE                          0x0004
111 
112 #define CMD_TYPE_WEP_40_BIT                     0x01
113 #define CMD_TYPE_WEP_104_BIT                    0x02
114 
115 #define CMD_NUM_OF_WEP_KEYS                     4
116 
117 #define CMD_WEP_KEY_INDEX_MASK                  0x3fff
118 
119 /* Define action or option for CMD_802_11_SCAN */
120 #define CMD_BSS_TYPE_BSS                        0x0001
121 #define CMD_BSS_TYPE_IBSS                       0x0002
122 #define CMD_BSS_TYPE_ANY                        0x0003
123 
124 /* Define action or option for CMD_802_11_SCAN */
125 #define CMD_SCAN_TYPE_ACTIVE                    0x0000
126 #define CMD_SCAN_TYPE_PASSIVE                   0x0001
127 
128 #define CMD_SCAN_RADIO_TYPE_BG                  0
129 
130 #define CMD_SCAN_PROBE_DELAY_TIME               0
131 
132 /* Define action or option for CMD_MAC_CONTROL */
133 #define CMD_ACT_MAC_RX_ON                       0x0001
134 #define CMD_ACT_MAC_TX_ON                       0x0002
135 #define CMD_ACT_MAC_LOOPBACK_ON                 0x0004
136 #define CMD_ACT_MAC_WEP_ENABLE                  0x0008
137 #define CMD_ACT_MAC_INT_ENABLE                  0x0010
138 #define CMD_ACT_MAC_MULTICAST_ENABLE            0x0020
139 #define CMD_ACT_MAC_BROADCAST_ENABLE            0x0040
140 #define CMD_ACT_MAC_PROMISCUOUS_ENABLE          0x0080
141 #define CMD_ACT_MAC_ALL_MULTICAST_ENABLE        0x0100
142 #define CMD_ACT_MAC_STRICT_PROTECTION_ENABLE    0x0400
143 
144 /* Event flags for CMD_802_11_SUBSCRIBE_EVENT */
145 #define CMD_SUBSCRIBE_RSSI_LOW                  0x0001
146 #define CMD_SUBSCRIBE_SNR_LOW                   0x0002
147 #define CMD_SUBSCRIBE_FAILCOUNT                 0x0004
148 #define CMD_SUBSCRIBE_BCNMISS                   0x0008
149 #define CMD_SUBSCRIBE_RSSI_HIGH                 0x0010
150 #define CMD_SUBSCRIBE_SNR_HIGH                  0x0020
151 
152 #define RADIO_PREAMBLE_LONG                     0x00
153 #define RADIO_PREAMBLE_SHORT                    0x02
154 #define RADIO_PREAMBLE_AUTO                     0x04
155 
156 /* Define action or option for CMD_802_11_RF_CHANNEL */
157 #define CMD_OPT_802_11_RF_CHANNEL_GET           0x00
158 #define CMD_OPT_802_11_RF_CHANNEL_SET           0x01
159 
160 /* Define action or option for CMD_802_11_DATA_RATE */
161 #define CMD_ACT_SET_TX_AUTO                     0x0000
162 #define CMD_ACT_SET_TX_FIX_RATE                 0x0001
163 #define CMD_ACT_GET_TX_RATE                     0x0002
164 
165 /* Options for CMD_802_11_FW_WAKE_METHOD */
166 #define CMD_WAKE_METHOD_UNCHANGED               0x0000
167 #define CMD_WAKE_METHOD_COMMAND_INT             0x0001
168 #define CMD_WAKE_METHOD_GPIO                    0x0002
169 
170 /* Object IDs for CMD_802_11_SNMP_MIB */
171 #define SNMP_MIB_OID_BSS_TYPE                   0x0000
172 #define SNMP_MIB_OID_OP_RATE_SET                0x0001
173 #define SNMP_MIB_OID_BEACON_PERIOD              0x0002  /* Reserved on v9+ */
174 #define SNMP_MIB_OID_DTIM_PERIOD                0x0003  /* Reserved on v9+ */
175 #define SNMP_MIB_OID_ASSOC_TIMEOUT              0x0004  /* Reserved on v9+ */
176 #define SNMP_MIB_OID_RTS_THRESHOLD              0x0005
177 #define SNMP_MIB_OID_SHORT_RETRY_LIMIT          0x0006
178 #define SNMP_MIB_OID_LONG_RETRY_LIMIT           0x0007
179 #define SNMP_MIB_OID_FRAG_THRESHOLD             0x0008
180 #define SNMP_MIB_OID_11D_ENABLE                 0x0009
181 #define SNMP_MIB_OID_11H_ENABLE                 0x000A
182 
183 /* Define action or option for CMD_BT_ACCESS */
184 enum cmd_bt_access_opts {
185 	/* The bt commands start at 5 instead of 1 because the old dft commands
186 	 * are mapped to 1-4.  These old commands are no longer maintained and
187 	 * should not be called.
188 	 */
189 	CMD_ACT_BT_ACCESS_ADD = 5,
190 	CMD_ACT_BT_ACCESS_DEL,
191 	CMD_ACT_BT_ACCESS_LIST,
192 	CMD_ACT_BT_ACCESS_RESET,
193 	CMD_ACT_BT_ACCESS_SET_INVERT,
194 	CMD_ACT_BT_ACCESS_GET_INVERT
195 };
196 
197 /* Define action or option for CMD_FWT_ACCESS */
198 enum cmd_fwt_access_opts {
199 	CMD_ACT_FWT_ACCESS_ADD = 1,
200 	CMD_ACT_FWT_ACCESS_DEL,
201 	CMD_ACT_FWT_ACCESS_LOOKUP,
202 	CMD_ACT_FWT_ACCESS_LIST,
203 	CMD_ACT_FWT_ACCESS_LIST_ROUTE,
204 	CMD_ACT_FWT_ACCESS_LIST_NEIGHBOR,
205 	CMD_ACT_FWT_ACCESS_RESET,
206 	CMD_ACT_FWT_ACCESS_CLEANUP,
207 	CMD_ACT_FWT_ACCESS_TIME,
208 };
209 
210 /* Define action or option for CMD_802_11_HOST_SLEEP_CFG */
211 enum cmd_wol_cfg_opts {
212 	CMD_ACT_ACTION_NONE = 0,
213 	CMD_ACT_SET_WOL_RULE,
214 	CMD_ACT_GET_WOL_RULE,
215 	CMD_ACT_RESET_WOL_RULE,
216 };
217 
218 /* Define action or option for CMD_MESH_ACCESS */
219 enum cmd_mesh_access_opts {
220 	CMD_ACT_MESH_GET_TTL = 1,
221 	CMD_ACT_MESH_SET_TTL,
222 	CMD_ACT_MESH_GET_STATS,
223 	CMD_ACT_MESH_GET_ANYCAST,
224 	CMD_ACT_MESH_SET_ANYCAST,
225 	CMD_ACT_MESH_SET_LINK_COSTS,
226 	CMD_ACT_MESH_GET_LINK_COSTS,
227 	CMD_ACT_MESH_SET_BCAST_RATE,
228 	CMD_ACT_MESH_GET_BCAST_RATE,
229 	CMD_ACT_MESH_SET_RREQ_DELAY,
230 	CMD_ACT_MESH_GET_RREQ_DELAY,
231 	CMD_ACT_MESH_SET_ROUTE_EXP,
232 	CMD_ACT_MESH_GET_ROUTE_EXP,
233 	CMD_ACT_MESH_SET_AUTOSTART_ENABLED,
234 	CMD_ACT_MESH_GET_AUTOSTART_ENABLED,
235 	CMD_ACT_MESH_SET_GET_PRB_RSP_LIMIT = 17,
236 };
237 
238 /* Define actions and types for CMD_MESH_CONFIG */
239 enum cmd_mesh_config_actions {
240 	CMD_ACT_MESH_CONFIG_STOP = 0,
241 	CMD_ACT_MESH_CONFIG_START,
242 	CMD_ACT_MESH_CONFIG_SET,
243 	CMD_ACT_MESH_CONFIG_GET,
244 };
245 
246 enum cmd_mesh_config_types {
247 	CMD_TYPE_MESH_SET_BOOTFLAG = 1,
248 	CMD_TYPE_MESH_SET_BOOTTIME,
249 	CMD_TYPE_MESH_SET_DEF_CHANNEL,
250 	CMD_TYPE_MESH_SET_MESH_IE,
251 	CMD_TYPE_MESH_GET_DEFAULTS,
252 	CMD_TYPE_MESH_GET_MESH_IE, /* GET_DEFAULTS is superset of GET_MESHIE */
253 };
254 
255 /* Card Event definition */
256 #define MACREG_INT_CODE_TX_PPA_FREE		0
257 #define MACREG_INT_CODE_TX_DMA_DONE		1
258 #define MACREG_INT_CODE_LINK_LOST_W_SCAN	2
259 #define MACREG_INT_CODE_LINK_LOST_NO_SCAN	3
260 #define MACREG_INT_CODE_LINK_SENSED		4
261 #define MACREG_INT_CODE_CMD_FINISHED		5
262 #define MACREG_INT_CODE_MIB_CHANGED		6
263 #define MACREG_INT_CODE_INIT_DONE		7
264 #define MACREG_INT_CODE_DEAUTHENTICATED		8
265 #define MACREG_INT_CODE_DISASSOCIATED		9
266 #define MACREG_INT_CODE_PS_AWAKE		10
267 #define MACREG_INT_CODE_PS_SLEEP		11
268 #define MACREG_INT_CODE_MIC_ERR_MULTICAST	13
269 #define MACREG_INT_CODE_MIC_ERR_UNICAST		14
270 #define MACREG_INT_CODE_WM_AWAKE		15
271 #define MACREG_INT_CODE_DEEP_SLEEP_AWAKE	16
272 #define MACREG_INT_CODE_ADHOC_BCN_LOST		17
273 #define MACREG_INT_CODE_HOST_AWAKE		18
274 #define MACREG_INT_CODE_STOP_TX			19
275 #define MACREG_INT_CODE_START_TX		20
276 #define MACREG_INT_CODE_CHANNEL_SWITCH		21
277 #define MACREG_INT_CODE_MEASUREMENT_RDY		22
278 #define MACREG_INT_CODE_WMM_CHANGE		23
279 #define MACREG_INT_CODE_BG_SCAN_REPORT		24
280 #define MACREG_INT_CODE_RSSI_LOW		25
281 #define MACREG_INT_CODE_SNR_LOW			26
282 #define MACREG_INT_CODE_MAX_FAIL		27
283 #define MACREG_INT_CODE_RSSI_HIGH		28
284 #define MACREG_INT_CODE_SNR_HIGH		29
285 #define MACREG_INT_CODE_MESH_AUTO_STARTED	35
286 #define MACREG_INT_CODE_FIRMWARE_READY		48
287 
288 
289 /* 802.11-related definitions */
290 
291 /* TxPD descriptor */
292 struct txpd {
293 	/* union to cope up with later FW revisions */
294 	union {
295 		/* Current Tx packet status */
296 		__le32 tx_status;
297 		struct {
298 			/* BSS type: client, AP, etc. */
299 			u8 bss_type;
300 			/* BSS number */
301 			u8 bss_num;
302 			/* Reserved */
303 			__le16 reserved;
304 		} bss;
305 	} u;
306 	/* Tx control */
307 	__le32 tx_control;
308 	__le32 tx_packet_location;
309 	/* Tx packet length */
310 	__le16 tx_packet_length;
311 	/* First 2 byte of destination MAC address */
312 	u8 tx_dest_addr_high[2];
313 	/* Last 4 byte of destination MAC address */
314 	u8 tx_dest_addr_low[4];
315 	/* Pkt Priority */
316 	u8 priority;
317 	/* Pkt Trasnit Power control */
318 	u8 powermgmt;
319 	/* Amount of time the packet has been queued (units = 2ms) */
320 	u8 pktdelay_2ms;
321 	/* reserved */
322 	u8 reserved1;
323 } __packed;
324 
325 /* RxPD Descriptor */
326 struct rxpd {
327 	/* union to cope up with later FW revisions */
328 	union {
329 		/* Current Rx packet status */
330 		__le16 status;
331 		struct {
332 			/* BSS type: client, AP, etc. */
333 			u8 bss_type;
334 			/* BSS number */
335 			u8 bss_num;
336 		} __packed bss;
337 	} __packed u;
338 
339 	/* SNR */
340 	u8 snr;
341 
342 	/* Tx control */
343 	u8 rx_control;
344 
345 	/* Pkt length */
346 	__le16 pkt_len;
347 
348 	/* Noise Floor */
349 	u8 nf;
350 
351 	/* Rx Packet Rate */
352 	u8 rx_rate;
353 
354 	/* Pkt addr */
355 	__le32 pkt_ptr;
356 
357 	/* Next Rx RxPD addr */
358 	__le32 next_rxpd_ptr;
359 
360 	/* Pkt Priority */
361 	u8 priority;
362 	u8 reserved[3];
363 } __packed;
364 
365 struct cmd_header {
366 	__le16 command;
367 	__le16 size;
368 	__le16 seqnum;
369 	__le16 result;
370 } __packed;
371 
372 /* Generic structure to hold all key types. */
373 struct enc_key {
374 	u16 len;
375 	u16 flags;  /* KEY_INFO_* from defs.h */
376 	u16 type; /* KEY_TYPE_* from defs.h */
377 	u8 key[32];
378 };
379 
380 /* lbs_offset_value */
381 struct lbs_offset_value {
382 	u32 offset;
383 	u32 value;
384 } __packed;
385 
386 #define MAX_11D_TRIPLETS	83
387 
388 struct mrvl_ie_domain_param_set {
389 	struct mrvl_ie_header header;
390 
391 	u8 country_code[IEEE80211_COUNTRY_STRING_LEN];
392 	struct ieee80211_country_ie_triplet triplet[MAX_11D_TRIPLETS];
393 } __packed;
394 
395 struct cmd_ds_802_11d_domain_info {
396 	struct cmd_header hdr;
397 
398 	__le16 action;
399 	struct mrvl_ie_domain_param_set domain;
400 } __packed;
401 
402 /*
403  * Define data structure for CMD_GET_HW_SPEC
404  * This structure defines the response for the GET_HW_SPEC command
405  */
406 struct cmd_ds_get_hw_spec {
407 	struct cmd_header hdr;
408 
409 	/* HW Interface version number */
410 	__le16 hwifversion;
411 	/* HW version number */
412 	__le16 version;
413 	/* Max number of TxPD FW can handle */
414 	__le16 nr_txpd;
415 	/* Max no of Multicast address */
416 	__le16 nr_mcast_adr;
417 	/* MAC address */
418 	u8 permanentaddr[6];
419 
420 	/* region Code */
421 	__le16 regioncode;
422 
423 	/* Number of antenna used */
424 	__le16 nr_antenna;
425 
426 	/* FW release number, example 0x01030304 = 2.3.4p1 */
427 	__le32 fwrelease;
428 
429 	/* Base Address of TxPD queue */
430 	__le32 wcb_base;
431 	/* Read Pointer of RxPd queue */
432 	__le32 rxpd_rdptr;
433 
434 	/* Write Pointer of RxPd queue */
435 	__le32 rxpd_wrptr;
436 
437 	/*FW/HW capability */
438 	__le32 fwcapinfo;
439 } __packed;
440 
441 struct cmd_ds_802_11_subscribe_event {
442 	struct cmd_header hdr;
443 
444 	__le16 action;
445 	__le16 events;
446 
447 	/* A TLV to the CMD_802_11_SUBSCRIBE_EVENT command can contain a
448 	 * number of TLVs. From the v5.1 manual, those TLVs would add up to
449 	 * 40 bytes. However, future firmware might add additional TLVs, so I
450 	 * bump this up a bit.
451 	 */
452 	uint8_t tlv[128];
453 } __packed;
454 
455 /*
456  * This scan handle Country Information IE(802.11d compliant)
457  * Define data structure for CMD_802_11_SCAN
458  */
459 struct cmd_ds_802_11_scan {
460 	struct cmd_header hdr;
461 
462 	uint8_t bsstype;
463 	uint8_t bssid[ETH_ALEN];
464 	uint8_t tlvbuffer[];
465 } __packed;
466 
467 struct cmd_ds_802_11_scan_rsp {
468 	struct cmd_header hdr;
469 
470 	__le16 bssdescriptsize;
471 	uint8_t nr_sets;
472 	uint8_t bssdesc_and_tlvbuffer[];
473 } __packed;
474 
475 struct cmd_ds_802_11_get_log {
476 	struct cmd_header hdr;
477 
478 	__le32 mcasttxframe;
479 	__le32 failed;
480 	__le32 retry;
481 	__le32 multiretry;
482 	__le32 framedup;
483 	__le32 rtssuccess;
484 	__le32 rtsfailure;
485 	__le32 ackfailure;
486 	__le32 rxfrag;
487 	__le32 mcastrxframe;
488 	__le32 fcserror;
489 	__le32 txframe;
490 	__le32 wepundecryptable;
491 } __packed;
492 
493 struct cmd_ds_mac_control {
494 	struct cmd_header hdr;
495 	__le16 action;
496 	u16 reserved;
497 } __packed;
498 
499 struct cmd_ds_mac_multicast_adr {
500 	struct cmd_header hdr;
501 	__le16 action;
502 	__le16 nr_of_adrs;
503 	u8 maclist[ETH_ALEN * MRVDRV_MAX_MULTICAST_LIST_SIZE];
504 } __packed;
505 
506 struct cmd_ds_802_11_authenticate {
507 	struct cmd_header hdr;
508 
509 	u8 bssid[ETH_ALEN];
510 	u8 authtype;
511 	u8 reserved[10];
512 } __packed;
513 
514 struct cmd_ds_802_11_deauthenticate {
515 	struct cmd_header hdr;
516 
517 	u8 macaddr[ETH_ALEN];
518 	__le16 reasoncode;
519 } __packed;
520 
521 struct cmd_ds_802_11_associate {
522 	struct cmd_header hdr;
523 
524 	u8 bssid[6];
525 	__le16 capability;
526 	__le16 listeninterval;
527 	__le16 bcnperiod;
528 	u8 dtimperiod;
529 	u8 iebuf[512];    /* Enough for required and most optional IEs */
530 } __packed;
531 
532 struct cmd_ds_802_11_associate_response {
533 	struct cmd_header hdr;
534 
535 	__le16 capability;
536 	__le16 statuscode;
537 	__le16 aid;
538 	u8 iebuf[512];
539 } __packed;
540 
541 struct cmd_ds_802_11_set_wep {
542 	struct cmd_header hdr;
543 
544 	/* ACT_ADD, ACT_REMOVE or ACT_ENABLE */
545 	__le16 action;
546 
547 	/* key Index selected for Tx */
548 	__le16 keyindex;
549 
550 	/* 40, 128bit or TXWEP */
551 	uint8_t keytype[4];
552 	uint8_t keymaterial[4][16];
553 } __packed;
554 
555 struct cmd_ds_802_11_snmp_mib {
556 	struct cmd_header hdr;
557 
558 	__le16 action;
559 	__le16 oid;
560 	__le16 bufsize;
561 	u8 value[128];
562 } __packed;
563 
564 struct cmd_ds_reg_access {
565 	struct cmd_header hdr;
566 
567 	__le16 action;
568 	__le16 offset;
569 	union {
570 		u8 bbp_rf;  /* for BBP and RF registers */
571 		__le32 mac; /* for MAC registers */
572 	} value;
573 } __packed;
574 
575 struct cmd_ds_802_11_radio_control {
576 	struct cmd_header hdr;
577 
578 	__le16 action;
579 	__le16 control;
580 } __packed;
581 
582 struct cmd_ds_802_11_beacon_control {
583 	struct cmd_header hdr;
584 
585 	__le16 action;
586 	__le16 beacon_enable;
587 	__le16 beacon_period;
588 } __packed;
589 
590 struct cmd_ds_802_11_sleep_params {
591 	struct cmd_header hdr;
592 
593 	/* ACT_GET/ACT_SET */
594 	__le16 action;
595 
596 	/* Sleep clock error in ppm */
597 	__le16 error;
598 
599 	/* Wakeup offset in usec */
600 	__le16 offset;
601 
602 	/* Clock stabilization time in usec */
603 	__le16 stabletime;
604 
605 	/* control periodic calibration */
606 	uint8_t calcontrol;
607 
608 	/* control the use of external sleep clock */
609 	uint8_t externalsleepclk;
610 
611 	/* reserved field, should be set to zero */
612 	__le16 reserved;
613 } __packed;
614 
615 struct cmd_ds_802_11_rf_channel {
616 	struct cmd_header hdr;
617 
618 	__le16 action;
619 	__le16 channel;
620 	__le16 rftype;      /* unused */
621 	__le16 reserved;    /* unused */
622 	u8 channellist[32]; /* unused */
623 } __packed;
624 
625 struct cmd_ds_802_11_rssi {
626 	struct cmd_header hdr;
627 
628 	/*
629 	 * request:  number of beacons (N) to average the SNR and NF over
630 	 * response: SNR of most recent beacon
631 	 */
632 	__le16 n_or_snr;
633 
634 	/*
635 	 * The following fields are only set in the response.
636 	 * In the request these are reserved and should be set to 0.
637 	 */
638 	__le16 nf;       /* most recent beacon noise floor */
639 	__le16 avg_snr;  /* average SNR weighted by N from request */
640 	__le16 avg_nf;   /* average noise floor weighted by N from request */
641 } __packed;
642 
643 struct cmd_ds_802_11_mac_address {
644 	struct cmd_header hdr;
645 
646 	__le16 action;
647 	u8 macadd[ETH_ALEN];
648 } __packed;
649 
650 struct cmd_ds_802_11_rf_tx_power {
651 	struct cmd_header hdr;
652 
653 	__le16 action;
654 	__le16 curlevel;
655 	s8 maxlevel;
656 	s8 minlevel;
657 } __packed;
658 
659 /* MONITOR_MODE only exists in OLPC v5 firmware */
660 struct cmd_ds_802_11_monitor_mode {
661 	struct cmd_header hdr;
662 
663 	__le16 action;
664 	__le16 mode;
665 } __packed;
666 
667 struct cmd_ds_set_boot2_ver {
668 	struct cmd_header hdr;
669 
670 	__le16 action;
671 	__le16 version;
672 } __packed;
673 
674 struct cmd_ds_802_11_fw_wake_method {
675 	struct cmd_header hdr;
676 
677 	__le16 action;
678 	__le16 method;
679 } __packed;
680 
681 struct cmd_ds_802_11_ps_mode {
682 	struct cmd_header hdr;
683 
684 	__le16 action;
685 
686 	/*
687 	 * Interval for keepalive in PS mode:
688 	 * 0x0000 = don't change
689 	 * 0x001E = firmware default
690 	 * 0xFFFF = disable
691 	 */
692 	__le16 nullpktinterval;
693 
694 	/*
695 	 * Number of DTIM intervals to wake up for:
696 	 * 0 = don't change
697 	 * 1 = firmware default
698 	 * 5 = max
699 	 */
700 	__le16 multipledtim;
701 
702 	__le16 reserved;
703 	__le16 locallisteninterval;
704 
705 	/*
706 	 * AdHoc awake period (FW v9+ only):
707 	 * 0 = don't change
708 	 * 1 = always awake (IEEE standard behavior)
709 	 * 2 - 31 = sleep for (n - 1) periods and awake for 1 period
710 	 * 32 - 254 = invalid
711 	 * 255 = sleep at each ATIM
712 	 */
713 	__le16 adhoc_awake_period;
714 } __packed;
715 
716 struct cmd_confirm_sleep {
717 	struct cmd_header hdr;
718 
719 	__le16 action;
720 	__le16 nullpktinterval;
721 	__le16 multipledtim;
722 	__le16 reserved;
723 	__le16 locallisteninterval;
724 } __packed;
725 
726 struct cmd_ds_802_11_data_rate {
727 	struct cmd_header hdr;
728 
729 	__le16 action;
730 	__le16 reserved;
731 	u8 rates[MAX_RATES];
732 } __packed;
733 
734 struct cmd_ds_802_11_rate_adapt_rateset {
735 	struct cmd_header hdr;
736 	__le16 action;
737 	__le16 enablehwauto;
738 	__le16 bitmap;
739 } __packed;
740 
741 struct cmd_ds_802_11_ad_hoc_start {
742 	struct cmd_header hdr;
743 
744 	u8 ssid[IEEE80211_MAX_SSID_LEN];
745 	u8 bsstype;
746 	__le16 beaconperiod;
747 	u8 dtimperiod;   /* Reserved on v9 and later */
748 	struct ieee_ie_ibss_param_set ibss;
749 	u8 reserved1[4];
750 	struct ieee_ie_ds_param_set ds;
751 	u8 reserved2[4];
752 	__le16 probedelay;  /* Reserved on v9 and later */
753 	__le16 capability;
754 	u8 rates[MAX_RATES];
755 	u8 tlv_memory_size_pad[100];
756 } __packed;
757 
758 struct cmd_ds_802_11_ad_hoc_result {
759 	struct cmd_header hdr;
760 
761 	u8 pad[3];
762 	u8 bssid[ETH_ALEN];
763 } __packed;
764 
765 struct adhoc_bssdesc {
766 	u8 bssid[ETH_ALEN];
767 	u8 ssid[IEEE80211_MAX_SSID_LEN];
768 	u8 type;
769 	__le16 beaconperiod;
770 	u8 dtimperiod;
771 	__le64 timestamp;
772 	__le64 localtime;
773 	struct ieee_ie_ds_param_set ds;
774 	u8 reserved1[4];
775 	struct ieee_ie_ibss_param_set ibss;
776 	u8 reserved2[4];
777 	__le16 capability;
778 	u8 rates[MAX_RATES];
779 
780 	/*
781 	 * DO NOT ADD ANY FIELDS TO THIS STRUCTURE. It is used below in the
782 	 * Adhoc join command and will cause a binary layout mismatch with
783 	 * the firmware
784 	 */
785 } __packed;
786 
787 struct cmd_ds_802_11_ad_hoc_join {
788 	struct cmd_header hdr;
789 
790 	struct adhoc_bssdesc bss;
791 	__le16 failtimeout;   /* Reserved on v9 and later */
792 	__le16 probedelay;    /* Reserved on v9 and later */
793 } __packed;
794 
795 struct cmd_ds_802_11_ad_hoc_stop {
796 	struct cmd_header hdr;
797 } __packed;
798 
799 struct cmd_ds_802_11_enable_rsn {
800 	struct cmd_header hdr;
801 
802 	__le16 action;
803 	__le16 enable;
804 } __packed;
805 
806 struct MrvlIEtype_keyParamSet {
807 	/* type ID */
808 	__le16 type;
809 
810 	/* length of Payload */
811 	__le16 length;
812 
813 	/* type of key: WEP=0, TKIP=1, AES=2 */
814 	__le16 keytypeid;
815 
816 	/* key control Info specific to a keytypeid */
817 	__le16 keyinfo;
818 
819 	/* length of key */
820 	__le16 keylen;
821 
822 	/* key material of size keylen */
823 	u8 key[32];
824 } __packed;
825 
826 #define MAX_WOL_RULES 		16
827 
828 struct host_wol_rule {
829 	uint8_t rule_no;
830 	uint8_t rule_ops;
831 	__le16 sig_offset;
832 	__le16 sig_length;
833 	__le16 reserve;
834 	__be32 sig_mask;
835 	__be32 signature;
836 } __packed;
837 
838 struct wol_config {
839 	uint8_t action;
840 	uint8_t pattern;
841 	uint8_t no_rules_in_cmd;
842 	uint8_t result;
843 	struct host_wol_rule rule[MAX_WOL_RULES];
844 } __packed;
845 
846 struct cmd_ds_host_sleep {
847 	struct cmd_header hdr;
848 	__le32 criteria;
849 	uint8_t gpio;
850 	uint16_t gap;
851 	struct wol_config wol_conf;
852 } __packed;
853 
854 
855 
856 struct cmd_ds_802_11_key_material {
857 	struct cmd_header hdr;
858 
859 	__le16 action;
860 	struct MrvlIEtype_keyParamSet keyParamSet[2];
861 } __packed;
862 
863 struct cmd_ds_802_11_eeprom_access {
864 	struct cmd_header hdr;
865 	__le16 action;
866 	__le16 offset;
867 	__le16 len;
868 	/* firmware says it returns a maximum of 20 bytes */
869 #define LBS_EEPROM_READ_LEN 20
870 	u8 value[LBS_EEPROM_READ_LEN];
871 } __packed;
872 
873 struct cmd_ds_802_11_tpc_cfg {
874 	struct cmd_header hdr;
875 
876 	__le16 action;
877 	uint8_t enable;
878 	int8_t P0;
879 	int8_t P1;
880 	int8_t P2;
881 	uint8_t usesnr;
882 } __packed;
883 
884 
885 struct cmd_ds_802_11_pa_cfg {
886 	struct cmd_header hdr;
887 
888 	__le16 action;
889 	uint8_t enable;
890 	int8_t P0;
891 	int8_t P1;
892 	int8_t P2;
893 } __packed;
894 
895 
896 struct cmd_ds_802_11_led_ctrl {
897 	struct cmd_header hdr;
898 
899 	__le16 action;
900 	__le16 numled;
901 	u8 data[256];
902 } __packed;
903 
904 /* Automatic Frequency Control */
905 struct cmd_ds_802_11_afc {
906 	struct cmd_header hdr;
907 
908 	__le16 afc_auto;
909 	union {
910 		struct {
911 			__le16 threshold;
912 			__le16 period;
913 		};
914 		struct {
915 			__le16 timing_offset; /* signed */
916 			__le16 carrier_offset; /* signed */
917 		};
918 	};
919 } __packed;
920 
921 struct cmd_tx_rate_query {
922 	__le16 txrate;
923 } __packed;
924 
925 struct cmd_ds_get_tsf {
926 	__le64 tsfvalue;
927 } __packed;
928 
929 struct cmd_ds_bt_access {
930 	struct cmd_header hdr;
931 
932 	__le16 action;
933 	__le32 id;
934 	u8 addr1[ETH_ALEN];
935 	u8 addr2[ETH_ALEN];
936 } __packed;
937 
938 struct cmd_ds_fwt_access {
939 	struct cmd_header hdr;
940 
941 	__le16 action;
942 	__le32 id;
943 	u8 valid;
944 	u8 da[ETH_ALEN];
945 	u8 dir;
946 	u8 ra[ETH_ALEN];
947 	__le32 ssn;
948 	__le32 dsn;
949 	__le32 metric;
950 	u8 rate;
951 	u8 hopcount;
952 	u8 ttl;
953 	__le32 expiration;
954 	u8 sleepmode;
955 	__le32 snr;
956 	__le32 references;
957 	u8 prec[ETH_ALEN];
958 } __packed;
959 
960 struct cmd_ds_mesh_config {
961 	struct cmd_header hdr;
962 
963 	__le16 action;
964 	__le16 channel;
965 	__le16 type;
966 	__le16 length;
967 	u8 data[128];	/* last position reserved */
968 } __packed;
969 
970 struct cmd_ds_mesh_access {
971 	struct cmd_header hdr;
972 
973 	__le16 action;
974 	__le32 data[32];	/* last position reserved */
975 } __packed;
976 
977 /* Number of stats counters returned by the firmware */
978 #define MESH_STATS_NUM 8
979 #endif
980