| /Linux-v5.10/drivers/net/ethernet/chelsio/cxgb/ |
| D | mv88e1xxx.h | 6 #ifndef BMCR_SPEED1000
7 # define BMCR_SPEED1000 0x40 macro
|
| D | mv88e1xxx.c | 131 ctl &= ~(BMCR_SPEED100 | BMCR_SPEED1000 | BMCR_ANENABLE); in mv88e1xxx_set_speed_duplex()
135 ctl |= BMCR_SPEED1000; in mv88e1xxx_set_speed_duplex()
142 if (ctl & BMCR_SPEED1000) /* auto-negotiation required for 1Gb/s */ in mv88e1xxx_set_speed_duplex()
|
| /Linux-v5.10/drivers/net/phy/ |
| D | xilinx_gmii2rgmii.c | 21 #define XILINX_GMII2RGMII_SPEED_MASK (BMCR_SPEED1000 | BMCR_SPEED100)
49 val |= BMCR_SPEED1000; in xgmiitorgmii_read_status()
|
| D | et1011c.c | 53 ctl &= ~(BMCR_FULLDPLX | BMCR_SPEED100 | BMCR_SPEED1000 | in et1011c_config_aneg()
|
| D | phy_device.c | 1956 ctl |= BMCR_SPEED1000; in genphy_setup_forced()
2145 err = phy_modify(phydev, MII_BMCR, BMCR_SPEED1000 | BMCR_SPEED100, in genphy_c37_config_aneg()
2146 BMCR_SPEED1000); in genphy_c37_config_aneg()
2312 if (bmcr & BMCR_SPEED1000) in genphy_read_status_fixed()
|
| D | dp83869.c | 63 BMCR_SPEED1000)
|
| D | phy.c | 393 if (val & BMCR_SPEED1000) in phy_mii_ioctl()
|
| D | marvell.c | 1310 BMCR_ANENABLE | BMCR_SPEED1000 | BMCR_FULLDPLX); in m88e6390_errata()
|
| /Linux-v5.10/drivers/net/ |
| D | mii.c | 122 ((bmcr & BMCR_SPEED1000 && in mii_ethtool_gset()
207 cmd->base.speed = ((bmcr & BMCR_SPEED1000 && in mii_ethtool_get_link_ksettings()
304 BMCR_SPEED1000 | BMCR_FULLDPLX); in mii_ethtool_sset()
306 tmp |= BMCR_SPEED1000; in mii_ethtool_sset()
401 BMCR_SPEED1000 | BMCR_FULLDPLX); in mii_ethtool_set_link_ksettings()
403 tmp |= BMCR_SPEED1000; in mii_ethtool_set_link_ksettings()
|
| /Linux-v5.10/include/uapi/linux/ |
| D | mdio.h | 79 #define MDIO_CTRL1_SPEEDSELEXT (BMCR_SPEED1000 | BMCR_SPEED100)
86 #define MDIO_PMA_CTRL1_SPEED1000 BMCR_SPEED1000
|
| D | mii.h | 42 #define BMCR_SPEED1000 0x0040 /* MSB of Speed (1000) */ macro
|
| /Linux-v5.10/drivers/net/ethernet/ibm/emac/ |
| D | phy.c | 123 ctl &= ~(BMCR_FULLDPLX | BMCR_SPEED100 | BMCR_SPEED1000 | BMCR_ANENABLE); in genmii_setup_aneg()
181 ctl &= ~(BMCR_FULLDPLX | BMCR_SPEED100 | BMCR_SPEED1000 | BMCR_ANENABLE); in genmii_setup_forced()
194 ctl |= BMCR_SPEED1000; in genmii_setup_forced()
267 if (bmcr & BMCR_SPEED1000) in genmii_read_link()
|
| /Linux-v5.10/drivers/net/ethernet/chelsio/cxgb3/ |
| D | vsc8211.c | 156 if (bmcr & BMCR_SPEED1000) in vsc8211_get_link_status()
232 if (bmcr & BMCR_SPEED1000) in vsc8211_get_link_status_fiber()
|
| D | t3_hw.c | 459 ctl &= ~(BMCR_SPEED100 | BMCR_SPEED1000 | BMCR_ANENABLE); in t3_set_phy_speed_duplex()
463 ctl |= BMCR_SPEED1000; in t3_set_phy_speed_duplex()
470 if (ctl & BMCR_SPEED1000) /* auto-negotiation required for GigE */ in t3_set_phy_speed_duplex()
|
| /Linux-v5.10/drivers/net/dsa/mv88e6xxx/ |
| D | serdes.c | 212 bmcr = val & ~(BMCR_SPEED100 | BMCR_FULLDPLX | BMCR_SPEED1000); in mv88e6352_serdes_pcs_link_up()
215 bmcr |= BMCR_SPEED1000; in mv88e6352_serdes_pcs_link_up()
840 bmcr = val & ~(BMCR_SPEED100 | BMCR_FULLDPLX | BMCR_SPEED1000); in mv88e6390_serdes_pcs_link_up()
844 bmcr |= BMCR_SPEED1000; in mv88e6390_serdes_pcs_link_up()
|
| /Linux-v5.10/drivers/net/ethernet/freescale/fman/ |
| D | fman_dtsec.c | 1310 tmp_reg16 &= ~(BMCR_SPEED100 | BMCR_SPEED1000); in dtsec_restart_autoneg()
1312 BMCR_FULLDPLX | BMCR_SPEED1000); in dtsec_restart_autoneg()
1427 BMCR_FULLDPLX | BMCR_SPEED1000); in dtsec_init()
1437 BMCR_FULLDPLX | BMCR_SPEED1000); in dtsec_init()
|
| /Linux-v5.10/drivers/net/ethernet/dlink/ |
| D | dl2k.c | 1548 switch (bmcr & (BMCR_SPEED100 | BMCR_SPEED1000)) { in mii_get_media()
1549 case BMCR_SPEED1000: in mii_get_media()
|
| /Linux-v5.10/drivers/net/ethernet/intel/e1000e/ |
| D | phy.c | 1452 *phy_ctrl &= ~BMCR_SPEED1000; in e1000e_phy_force_speed_duplex_setup()
1456 *phy_ctrl &= ~(BMCR_SPEED1000 | BMCR_SPEED100); in e1000e_phy_force_speed_duplex_setup()
|
| /Linux-v5.10/drivers/net/ethernet/ |
| D | jme.c | 436 phylink |= ((bmcr & BMCR_SPEED1000) && in jme_check_link()
1871 BMCR_SPEED1000 | BMCR_FULLDPLX); in jme_set_100m_half()
2635 (val & BMCR_SPEED1000)) in jme_ioctl()
|
| /Linux-v5.10/drivers/net/dsa/sja1105/ |
| D | sja1105_main.c | 886 pcs_speed = BMCR_SPEED1000; in sja1105_sgmii_pcs_force_speed()
1833 if (bmcr & BMCR_SPEED1000) in sja1105_static_config_reload()
|
| /Linux-v5.10/drivers/net/ethernet/altera/ |
| D | altera_tse_main.c | 1127 tmp_reg |= (BMCR_SPEED1000 | BMCR_FULLDPLX | BMCR_ANENABLE); in init_sgmii_pcs()
|
| /Linux-v5.10/drivers/net/ethernet/broadcom/ |
| D | bnx2.c | 1534 bmcr |= BMCR_SPEED1000 | BMCR_ANENABLE | BMCR_ANRESTART; in bnx2_disable_forced_2g5()
1781 new_bmcr |= BMCR_SPEED1000; in bnx2_setup_serdes_phy()
2454 BMCR_SPEED1000); in bnx2_set_phy_loopback()
6102 bmcr |= BMCR_SPEED1000 | BMCR_FULLDPLX; in bnx2_5706_serdes_timer()
|
| D | tg3.c | 2573 BMCR_FULLDPLX | BMCR_SPEED1000); in tg3_phy_reset_5703_4_5()
4479 bmcr |= BMCR_SPEED1000; in tg3_phy_copper_begin()
4523 switch (val & (BMCR_SPEED1000 | BMCR_SPEED100)) { in tg3_phy_pull_config()
4536 case BMCR_SPEED1000: in tg3_phy_pull_config()
5914 bmcr &= ~BMCR_SPEED1000; in tg3_setup_fiber_mii_phy()
5924 new_bmcr |= BMCR_SPEED1000; in tg3_setup_fiber_mii_phy()
6042 bmcr |= BMCR_SPEED1000 | BMCR_FULLDPLX; in tg3_serdes_parallel_detect()
8219 bmcr |= BMCR_SPEED1000; in tg3_phy_lpbk_set()
|
| /Linux-v5.10/drivers/net/ethernet/sun/ |
| D | niu.c | 1185 if ((bmcr & BMCR_SPEED1000) && !(bmcr & BMCR_SPEED100)) in link_status_mii()
1695 bmcr = (BMCR_SPEED1000 | BMCR_FULLDPLX); in xcvr_init_1g_rgmii()
1744 bmcr |= BMCR_SPEED1000; in mii_init_common()
1812 bmcr |= BMCR_SPEED1000; in mii_init_common()
|
| /Linux-v5.10/drivers/net/ethernet/via/ |
| D | via-velocity.c | 901 MII_REG_BITS_ON(BMCR_SPEED1000, MII_BMCR, vptr->mac_regs); in velocity_set_media_mode()
|
