Searched refs:hooked (Results 1 – 25 of 43) sorted by relevance
12
21 Say Y here if you have ADE7854/58/68/78 hooked to an I2C bus.31 Say Y here if you have ADE7854/58/68/78 hooked to a SPI bus.
4 is hooked up to a pull-up GPIO line and - optionally - the HPD line is5 hooked up to another GPIO line.
64 has address 0.0.0.0. Every device that is hooked up to an input of the65 TV has address a.0.0.0 (where 'a' is ≥ 1), devices hooked up to those in
9 - If the regulator hooked up to a pin like SDMMC0_VDD is 3.3V then10 bit 7 of GRF_IO_VSEL needs to be 0. If the regulator hooked up to15 hooked up to the pins.
17 is hooked to a parent interrupt controller: e.g: ARM GIC for ARM-based
4 is hooked to a parent interrupt controller: e.g: ARM GIC for ARM-based
34 * Builtin CD line is hooked to ground to prevent JTAG at boot
166 * NOTE: vcc_sd isn't hooked up on v1.0 boards where power comes from229 disable-wp; /* wp not hooked up */
62 /* The lcd panel i2c interface is hooked up via gpios */
64 /* The lcd panel i2c interface is hooked up via gpios */
151 disable-wp; /* wp not hooked up */
439 disable-wp; /* wp not hooked up */
128 disable-wp; /* wp not hooked up */
208 * are actually hooked together and only separated for
6 various security checks to be hooked by new kernel extensions. The name
60 Say Y here if you have AD7142/AD7147 hooked to an I2C bus.70 Say Y here if you have AD7142/AD7147 hooked to a SPI bus.105 acceleration sensor hooked to an I2C bus.257 hooked to an I2C bus.700 Say Y here if you have ADXL345/6 hooked to an I2C bus.710 Say Y here if you have ADXL345/6 hooked to a SPI bus.
69 These are all hooked together by the machine driver depending on the
13 device LEDs should be exposed as LED class devices and hooked up to the
87 are hooked to this driver through platform_data structure.
33 we'd assume that the write protect is hooked up directly to the
518 * hooked to ground. Because we specified "cd-gpios" below dw_mmc764 * In our case the official card detect is hooked to ground
47 Those types of devices require different approach to be hooked into Linux kernel.
55 wired such that the EHCI debug controller is hooked up to the
176 - RESET: Used by I2C-HID, not hooked up in HID core.177 - SET_POWER: Used by I2C-HID, not hooked up in HID core.
121 calling one of the ioremap_*() functions. Mmiotrace is hooked into the
