1 /* 2 * wd33c93.h - Linux device driver definitions for the 3 * Commodore Amiga A2091/590 SCSI controller card 4 * 5 * IMPORTANT: This file is for version 1.25 - 09/Jul/1997 6 * 7 * Copyright (c) 1996 John Shifflett, GeoLog Consulting 8 * john@geolog.com 9 * jshiffle@netcom.com 10 * 11 * This program is free software; you can redistribute it and/or modify 12 * it under the terms of the GNU General Public License as published by 13 * the Free Software Foundation; either version 2, or (at your option) 14 * any later version. 15 * 16 * This program is distributed in the hope that it will be useful, 17 * but WITHOUT ANY WARRANTY; without even the implied warranty of 18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 19 * GNU General Public License for more details. 20 * 21 */ 22 #ifndef WD33C93_H 23 #define WD33C93_H 24 25 26 #define PROC_INTERFACE /* add code for /proc/scsi/wd33c93/xxx interface */ 27 #ifdef PROC_INTERFACE 28 #define PROC_STATISTICS /* add code for keeping various real time stats */ 29 #endif 30 31 #define SYNC_DEBUG /* extra info on sync negotiation printed */ 32 #define DEBUGGING_ON /* enable command-line debugging bitmask */ 33 #define DEBUG_DEFAULTS 0 /* default debugging bitmask */ 34 35 36 #ifdef DEBUGGING_ON 37 #define DB(f,a) if (hostdata->args & (f)) a; 38 #else 39 #define DB(f,a) 40 #endif 41 42 #define uchar unsigned char 43 44 45 /* wd register names */ 46 #define WD_OWN_ID 0x00 47 #define WD_CONTROL 0x01 48 #define WD_TIMEOUT_PERIOD 0x02 49 #define WD_CDB_1 0x03 50 #define WD_CDB_2 0x04 51 #define WD_CDB_3 0x05 52 #define WD_CDB_4 0x06 53 #define WD_CDB_5 0x07 54 #define WD_CDB_6 0x08 55 #define WD_CDB_7 0x09 56 #define WD_CDB_8 0x0a 57 #define WD_CDB_9 0x0b 58 #define WD_CDB_10 0x0c 59 #define WD_CDB_11 0x0d 60 #define WD_CDB_12 0x0e 61 #define WD_TARGET_LUN 0x0f 62 #define WD_COMMAND_PHASE 0x10 63 #define WD_SYNCHRONOUS_TRANSFER 0x11 64 #define WD_TRANSFER_COUNT_MSB 0x12 65 #define WD_TRANSFER_COUNT 0x13 66 #define WD_TRANSFER_COUNT_LSB 0x14 67 #define WD_DESTINATION_ID 0x15 68 #define WD_SOURCE_ID 0x16 69 #define WD_SCSI_STATUS 0x17 70 #define WD_COMMAND 0x18 71 #define WD_DATA 0x19 72 #define WD_QUEUE_TAG 0x1a 73 #define WD_AUXILIARY_STATUS 0x1f 74 75 /* WD commands */ 76 #define WD_CMD_RESET 0x00 77 #define WD_CMD_ABORT 0x01 78 #define WD_CMD_ASSERT_ATN 0x02 79 #define WD_CMD_NEGATE_ACK 0x03 80 #define WD_CMD_DISCONNECT 0x04 81 #define WD_CMD_RESELECT 0x05 82 #define WD_CMD_SEL_ATN 0x06 83 #define WD_CMD_SEL 0x07 84 #define WD_CMD_SEL_ATN_XFER 0x08 85 #define WD_CMD_SEL_XFER 0x09 86 #define WD_CMD_RESEL_RECEIVE 0x0a 87 #define WD_CMD_RESEL_SEND 0x0b 88 #define WD_CMD_WAIT_SEL_RECEIVE 0x0c 89 #define WD_CMD_TRANS_ADDR 0x18 90 #define WD_CMD_TRANS_INFO 0x20 91 #define WD_CMD_TRANSFER_PAD 0x21 92 #define WD_CMD_SBT_MODE 0x80 93 94 /* ASR register */ 95 #define ASR_INT (0x80) 96 #define ASR_LCI (0x40) 97 #define ASR_BSY (0x20) 98 #define ASR_CIP (0x10) 99 #define ASR_PE (0x02) 100 #define ASR_DBR (0x01) 101 102 /* SCSI Bus Phases */ 103 #define PHS_DATA_OUT 0x00 104 #define PHS_DATA_IN 0x01 105 #define PHS_COMMAND 0x02 106 #define PHS_STATUS 0x03 107 #define PHS_MESS_OUT 0x06 108 #define PHS_MESS_IN 0x07 109 110 /* Command Status Register definitions */ 111 112 /* reset state interrupts */ 113 #define CSR_RESET 0x00 114 #define CSR_RESET_AF 0x01 115 116 /* successful completion interrupts */ 117 #define CSR_RESELECT 0x10 118 #define CSR_SELECT 0x11 119 #define CSR_SEL_XFER_DONE 0x16 120 #define CSR_XFER_DONE 0x18 121 122 /* paused or aborted interrupts */ 123 #define CSR_MSGIN 0x20 124 #define CSR_SDP 0x21 125 #define CSR_SEL_ABORT 0x22 126 #define CSR_RESEL_ABORT 0x25 127 #define CSR_RESEL_ABORT_AM 0x27 128 #define CSR_ABORT 0x28 129 130 /* terminated interrupts */ 131 #define CSR_INVALID 0x40 132 #define CSR_UNEXP_DISC 0x41 133 #define CSR_TIMEOUT 0x42 134 #define CSR_PARITY 0x43 135 #define CSR_PARITY_ATN 0x44 136 #define CSR_BAD_STATUS 0x45 137 #define CSR_UNEXP 0x48 138 139 /* service required interrupts */ 140 #define CSR_RESEL 0x80 141 #define CSR_RESEL_AM 0x81 142 #define CSR_DISC 0x85 143 #define CSR_SRV_REQ 0x88 144 145 /* Own ID/CDB Size register */ 146 #define OWNID_EAF 0x08 147 #define OWNID_EHP 0x10 148 #define OWNID_RAF 0x20 149 #define OWNID_FS_8 0x00 150 #define OWNID_FS_12 0x40 151 #define OWNID_FS_16 0x80 152 153 /* define these so we don't have to change a2091.c, etc. */ 154 #define WD33C93_FS_8_10 OWNID_FS_8 155 #define WD33C93_FS_12_15 OWNID_FS_12 156 #define WD33C93_FS_16_20 OWNID_FS_16 157 158 /* pass input-clock explicitly. accepted mhz values are 8-10,12-20 */ 159 #define WD33C93_FS_MHZ(mhz) (mhz) 160 161 /* Control register */ 162 #define CTRL_HSP 0x01 163 #define CTRL_HA 0x02 164 #define CTRL_IDI 0x04 165 #define CTRL_EDI 0x08 166 #define CTRL_HHP 0x10 167 #define CTRL_POLLED 0x00 168 #define CTRL_BURST 0x20 169 #define CTRL_BUS 0x40 170 #define CTRL_DMA 0x80 171 172 /* Timeout Period register */ 173 #define TIMEOUT_PERIOD_VALUE 20 /* 20 = 200 ms */ 174 175 /* Synchronous Transfer Register */ 176 #define STR_FSS 0x80 177 178 /* Destination ID register */ 179 #define DSTID_DPD 0x40 180 #define DATA_OUT_DIR 0 181 #define DATA_IN_DIR 1 182 #define DSTID_SCC 0x80 183 184 /* Source ID register */ 185 #define SRCID_MASK 0x07 186 #define SRCID_SIV 0x08 187 #define SRCID_DSP 0x20 188 #define SRCID_ES 0x40 189 #define SRCID_ER 0x80 190 191 /* This is what the 3393 chip looks like to us */ 192 typedef struct { 193 #ifdef CONFIG_WD33C93_PIO 194 unsigned int SASR; 195 unsigned int SCMD; 196 #else 197 volatile unsigned char *SASR; 198 volatile unsigned char *SCMD; 199 #endif 200 } wd33c93_regs; 201 202 203 typedef int (*dma_setup_t) (struct scsi_cmnd *SCpnt, int dir_in); 204 typedef void (*dma_stop_t) (struct Scsi_Host *instance, 205 struct scsi_cmnd *SCpnt, int status); 206 207 208 #define ILLEGAL_STATUS_BYTE 0xff 209 210 #define DEFAULT_SX_PER 376 /* (ns) fairly safe */ 211 #define DEFAULT_SX_OFF 0 /* aka async */ 212 213 #define OPTIMUM_SX_PER 252 /* (ns) best we can do (mult-of-4) */ 214 #define OPTIMUM_SX_OFF 12 /* size of wd3393 fifo */ 215 216 struct sx_period { 217 unsigned int period_ns; 218 uchar reg_value; 219 }; 220 221 /* FEF: defines for hostdata->dma_buffer_pool */ 222 223 #define BUF_CHIP_ALLOCED 0 224 #define BUF_SCSI_ALLOCED 1 225 226 struct WD33C93_hostdata { 227 struct Scsi_Host *next; 228 wd33c93_regs regs; 229 spinlock_t lock; 230 uchar clock_freq; 231 uchar chip; /* what kind of wd33c93? */ 232 uchar microcode; /* microcode rev */ 233 uchar dma_buffer_pool; /* FEF: buffer from chip_ram? */ 234 int dma_dir; /* data transfer dir. */ 235 dma_setup_t dma_setup; 236 dma_stop_t dma_stop; 237 unsigned int dma_xfer_mask; 238 uchar *dma_bounce_buffer; 239 unsigned int dma_bounce_len; 240 volatile uchar busy[8]; /* index = target, bit = lun */ 241 volatile struct scsi_cmnd *input_Q; /* commands waiting to be started */ 242 volatile struct scsi_cmnd *selecting; /* trying to select this command */ 243 volatile struct scsi_cmnd *connected; /* currently connected command */ 244 volatile struct scsi_cmnd *disconnected_Q;/* commands waiting for reconnect */ 245 uchar state; /* what we are currently doing */ 246 uchar dma; /* current state of DMA (on/off) */ 247 uchar level2; /* extent to which Level-2 commands are used */ 248 uchar disconnect; /* disconnect/reselect policy */ 249 unsigned int args; /* set from command-line argument */ 250 uchar incoming_msg[8]; /* filled during message_in phase */ 251 int incoming_ptr; /* mainly used with EXTENDED messages */ 252 uchar outgoing_msg[8]; /* send this during next message_out */ 253 int outgoing_len; /* length of outgoing message */ 254 unsigned int default_sx_per; /* default transfer period for SCSI bus */ 255 uchar sync_xfer[8]; /* sync_xfer reg settings per target */ 256 uchar sync_stat[8]; /* status of sync negotiation per target */ 257 uchar no_sync; /* bitmask: don't do sync on these targets */ 258 uchar no_dma; /* set this flag to disable DMA */ 259 uchar dma_mode; /* DMA Burst Mode or Single Byte DMA */ 260 uchar fast; /* set this flag to enable Fast SCSI */ 261 struct sx_period sx_table[9]; /* transfer periods for actual DTC-setting */ 262 #ifdef PROC_INTERFACE 263 uchar proc; /* bitmask: what's in proc output */ 264 #ifdef PROC_STATISTICS 265 unsigned long cmd_cnt[8]; /* # of commands issued per target */ 266 unsigned long int_cnt; /* # of interrupts serviced */ 267 unsigned long pio_cnt; /* # of pio data transfers */ 268 unsigned long dma_cnt; /* # of DMA data transfers */ 269 unsigned long disc_allowed_cnt[8]; /* # of disconnects allowed per target */ 270 unsigned long disc_done_cnt[8]; /* # of disconnects done per target*/ 271 #endif 272 #endif 273 }; 274 275 276 /* defines for hostdata->chip */ 277 278 #define C_WD33C93 0 279 #define C_WD33C93A 1 280 #define C_WD33C93B 2 281 #define C_UNKNOWN_CHIP 100 282 283 /* defines for hostdata->state */ 284 285 #define S_UNCONNECTED 0 286 #define S_SELECTING 1 287 #define S_RUNNING_LEVEL2 2 288 #define S_CONNECTED 3 289 #define S_PRE_TMP_DISC 4 290 #define S_PRE_CMP_DISC 5 291 292 /* defines for hostdata->dma */ 293 294 #define D_DMA_OFF 0 295 #define D_DMA_RUNNING 1 296 297 /* defines for hostdata->level2 */ 298 /* NOTE: only the first 3 are implemented so far */ 299 300 #define L2_NONE 1 /* no combination commands - we get lots of ints */ 301 #define L2_SELECT 2 /* start with SEL_ATN_XFER, but never resume it */ 302 #define L2_BASIC 3 /* resume after STATUS ints & RDP messages */ 303 #define L2_DATA 4 /* resume after DATA_IN/OUT ints */ 304 #define L2_MOST 5 /* resume after anything except a RESELECT int */ 305 #define L2_RESELECT 6 /* resume after everything, including RESELECT ints */ 306 #define L2_ALL 7 /* always resume */ 307 308 /* defines for hostdata->disconnect */ 309 310 #define DIS_NEVER 0 311 #define DIS_ADAPTIVE 1 312 #define DIS_ALWAYS 2 313 314 /* defines for hostdata->args */ 315 316 #define DB_TEST1 1<<0 317 #define DB_TEST2 1<<1 318 #define DB_QUEUE_COMMAND 1<<2 319 #define DB_EXECUTE 1<<3 320 #define DB_INTR 1<<4 321 #define DB_TRANSFER 1<<5 322 #define DB_MASK 0x3f 323 324 /* defines for hostdata->sync_stat[] */ 325 326 #define SS_UNSET 0 327 #define SS_FIRST 1 328 #define SS_WAITING 2 329 #define SS_SET 3 330 331 /* defines for hostdata->proc */ 332 333 #define PR_VERSION 1<<0 334 #define PR_INFO 1<<1 335 #define PR_STATISTICS 1<<2 336 #define PR_CONNECTED 1<<3 337 #define PR_INPUTQ 1<<4 338 #define PR_DISCQ 1<<5 339 #define PR_TEST 1<<6 340 #define PR_STOP 1<<7 341 342 343 void wd33c93_init (struct Scsi_Host *instance, const wd33c93_regs regs, 344 dma_setup_t setup, dma_stop_t stop, int clock_freq); 345 int wd33c93_abort (struct scsi_cmnd *cmd); 346 int wd33c93_queuecommand (struct Scsi_Host *h, struct scsi_cmnd *cmd); 347 void wd33c93_intr (struct Scsi_Host *instance); 348 int wd33c93_show_info(struct seq_file *, struct Scsi_Host *); 349 int wd33c93_write_info(struct Scsi_Host *, char *, int); 350 int wd33c93_host_reset (struct scsi_cmnd *); 351 352 #endif /* WD33C93_H */ 353
