/Linux-v4.19/arch/mips/include/asm/mach-ar7/ |
D | ar7.h | 124 return (readl((void *)KSEG1ADDR(AR7_REGS_GPIO + 0x24)) & 0xffff) == in ar7_is_titan() 131 KSEG1ADDR(AR7_REGS_GPIO + 0x14)) & 0xffff); in ar7_chip_id() 136 unsigned int val = readl((void *)KSEG1ADDR(AR7_REGS_GPIO + in titan_chip_id() 143 return (readl((void *)KSEG1ADDR(AR7_REGS_GPIO + (ar7_is_titan() ? 0x24 : in ar7_chip_rev() 170 (void *)KSEG1ADDR(AR7_REGS_RESET + AR7_RESET_PERIPHERAL); in ar7_device_enable() 178 (void *)KSEG1ADDR(AR7_REGS_RESET + AR7_RESET_PERIPHERAL); in ar7_device_disable() 191 void *power_reg = (void *)KSEG1ADDR(AR7_REGS_POWER); in ar7_device_on() 198 void *power_reg = (void *)KSEG1ADDR(AR7_REGS_POWER); in ar7_device_off()
|
/Linux-v4.19/arch/mips/include/asm/lasat/ |
D | lasatint.h | 6 #define LASAT_INT_STATUS_REG_100 (KSEG1ADDR(0x1c880000)) 7 #define LASAT_INT_MASK_REG_100 (KSEG1ADDR(0x1c890000)) 11 #define LASAT_INT_STATUS_REG_200 (KSEG1ADDR(0x1104003c)) 12 #define LASAT_INT_MASK_REG_200 (KSEG1ADDR(0x1104003c))
|
D | picvue.h | 3 #define PVC_REG_100 KSEG1ADDR(0x1c820000) 11 #define PVC_REG_200 KSEG1ADDR(0x11000000)
|
D | eeprom.h | 5 #define AT93C_REG_100 KSEG1ADDR(0x1c810000) 13 #define AT93C_REG_200 KSEG1ADDR(0x11000000)
|
D | ds1603.h | 5 #define DS1603_REG_100 (KSEG1ADDR(0x1c810000)) 12 #define DS1603_REG_200 (KSEG1ADDR(0x11000000))
|
/Linux-v4.19/arch/mips/alchemy/common/ |
D | irq.c | 291 void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR); in au1x_ic0_unmask() 301 void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR); in au1x_ic1_unmask() 311 void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR); in au1x_ic0_mask() 321 void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR); in au1x_ic1_mask() 331 void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR); in au1x_ic0_ack() 345 void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR); in au1x_ic1_ack() 359 void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR); in au1x_ic0_maskack() 371 void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR); in au1x_ic1_maskack() 438 base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR); in au1x_ic_settype() 442 base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR); in au1x_ic_settype() [all …]
|
D | usb.c | 267 (void __iomem *)KSEG1ADDR(AU1300_USB_CTL_PHYS_ADDR); in au1300_usb_control() 295 (void __iomem *)KSEG1ADDR(AU1300_USB_CTL_PHYS_ADDR); in au1300_usb_init() 362 (void __iomem *)KSEG1ADDR(AU1200_USB_CTL_PHYS_ADDR); in au1200_usb_control() 385 (void __iomem *)KSEG1ADDR(AU1200_USB_CTL_PHYS_ADDR); in au1200_usb_init() 393 void __iomem *base = (void __iomem *)KSEG1ADDR(rb + reg); in au1000_usb_init() 426 void __iomem *base = (void __iomem *)KSEG1ADDR(rb); in __au1xx0_ohci_control() 513 void __iomem *base = (void __iomem *)KSEG1ADDR(br); in au1000_usb_pm() 531 (void __iomem *)KSEG1ADDR(AU1200_USB_OTG_PHYS_ADDR); in au1200_usb_pm() 551 (void __iomem *)KSEG1ADDR(AU1300_USB_CTL_PHYS_ADDR); in au1300_usb_pm()
|
/Linux-v4.19/arch/mips/lasat/ |
D | setup.c | 59 .reset_reg = (void *)KSEG1ADDR(0x1c840000), 60 .flash_wp_reg = (void *)KSEG1ADDR(0x1c800000), 2 62 .reset_reg = (void *)KSEG1ADDR(0x11080000), 63 .flash_wp_reg = (void *)KSEG1ADDR(0x11000000), 6
|
D | serial.c | 50 lasat_serial_res[0].start = KSEG1ADDR(LASAT_UART_REGS_BASE_100); in lasat_uart_add() 62 lasat_serial_res[0].start = KSEG1ADDR(LASAT_UART_REGS_BASE_200); in lasat_uart_add()
|
/Linux-v4.19/arch/mips/ath79/ |
D | early_printk.c | 39 void __iomem *base = (void __iomem *)(KSEG1ADDR(AR71XX_UART_BASE)); in prom_putchar_ar71xx() 48 void __iomem *base = (void __iomem *)(KSEG1ADDR(AR933X_UART_BASE)); in prom_putchar_ar933x() 97 gpio_base = (void __iomem *)KSEG1ADDR(AR71XX_GPIO_BASE); in prom_enable_uart() 108 base = (void __iomem *)(KSEG1ADDR(AR71XX_RESET_BASE)); in prom_putchar_init()
|
/Linux-v4.19/arch/mips/rb532/ |
D | irq.c | 62 .base_addr = (u32 *) KSEG1ADDR(IC_GROUP0_PEND + 0 * IC_GROUP_OFFSET)}, 65 .base_addr = (u32 *) KSEG1ADDR(IC_GROUP0_PEND + 1 * IC_GROUP_OFFSET)}, 68 .base_addr = (u32 *) KSEG1ADDR(IC_GROUP0_PEND + 2 * IC_GROUP_OFFSET)}, 71 .base_addr = (u32 *) KSEG1ADDR(IC_GROUP0_PEND + 3 * IC_GROUP_OFFSET)}, 74 .base_addr = (u32 *) KSEG1ADDR(IC_GROUP0_PEND + 4 * IC_GROUP_OFFSET)}
|
/Linux-v4.19/arch/mips/ralink/ |
D | early_printk.c | 33 static __iomem void *uart_membase = (__iomem void *) KSEG1ADDR(EARLY_UART_BASE); 34 static __iomem void *chipid_membase = (__iomem void *) KSEG1ADDR(CHIPID_BASE); 66 uart_membase = (__iomem void *) KSEG1ADDR(EARLY_UART_BASE + in find_uart_base()
|
D | prom.c | 44 argv = (char **) KSEG1ADDR(fw_arg1); in prom_init_cmdline() 53 char *p = (char *) KSEG1ADDR(argv[i]); in prom_init_cmdline()
|
/Linux-v4.19/arch/mips/include/asm/mach-au1x00/ |
D | gpio-au1000.h | 275 void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_SYS_PHYS_ADDR); in alchemy_gpio1_input_enable() 286 void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR); in __alchemy_gpio2_mod_dir() 300 void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR); in alchemy_gpio2_set_value() 309 void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR); in alchemy_gpio2_get_value() 361 void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR); in __alchemy_gpio2_mod_int() 443 void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR); in alchemy_gpio2_enable() 457 void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR); in alchemy_gpio2_disable()
|
D | au1000.h | 603 void __iomem *b = (void __iomem *)KSEG1ADDR(AU1000_SYS_PHYS_ADDR); in alchemy_rdsys() 610 void __iomem *b = (void __iomem *)KSEG1ADDR(AU1000_SYS_PHYS_ADDR); in alchemy_wrsys() 619 void __iomem *b = (void __iomem *)KSEG1ADDR(AU1000_STATIC_MEM_PHYS_ADDR); in alchemy_rdsmem() 626 void __iomem *b = (void __iomem *)KSEG1ADDR(AU1000_STATIC_MEM_PHYS_ADDR); in alchemy_wrsmem() 726 void __iomem *addr = (void __iomem *)KSEG1ADDR(uart_phys); in alchemy_uart_enable() 741 void __iomem *addr = (void __iomem *)KSEG1ADDR(uart_phys); in alchemy_uart_disable() 749 void __iomem *base = (void __iomem *)KSEG1ADDR(uart_phys); in alchemy_uart_putchar()
|
/Linux-v4.19/include/video/ |
D | maxinefb.h | 16 #define MAXINEFB_IMS332_ADDRESS KSEG1ADDR(0x1c140000) 22 #define DS5000_xx_ONBOARD_FBMEM_START KSEG1ADDR(0x0a000000)
|
/Linux-v4.19/arch/mips/ath25/ |
D | early_printk.c | 35 base = (void __iomem *)(KSEG1ADDR(AR2315_UART0_BASE)); in prom_putchar() 37 base = (void __iomem *)(KSEG1ADDR(AR5312_UART0_BASE)); in prom_putchar()
|
/Linux-v4.19/arch/mips/ar7/ |
D | memory.c | 36 u32 *addr = (u32 *)KSEG1ADDR(AR7_SDRAM_BASE + size - 4); in memsize() 37 u32 *kernel_end = (u32 *)KSEG1ADDR(CPHYSADDR((u32)&_end)); in memsize()
|
D | prom.c | 187 struct psbl_rec *psbl = (struct psbl_rec *)(KSEG1ADDR(0x14000300)); in ar7_init_env() 188 void *psp_env = (void *)KSEG1ADDR(psbl->env_base); in ar7_init_env() 252 #define PORT(offset) (KSEG1ADDR(AR7_REGS_UART0 + (offset * 4)))
|
/Linux-v4.19/arch/mips/emma/markeins/ |
D | platform.c | 109 .membase= (void __iomem*)KSEG1ADDR(EMMA2RH_PFUR0_BASE + 3), 117 .membase = (void __iomem*)KSEG1ADDR(EMMA2RH_PFUR1_BASE + 3), 125 .membase = (void __iomem*)KSEG1ADDR(EMMA2RH_PFUR2_BASE + 3),
|
/Linux-v4.19/arch/mips/lantiq/ |
D | prom.c | 56 char **argv = (char **) KSEG1ADDR(fw_arg1); in prom_init_cmdline() 62 char *p = (char *) KSEG1ADDR(argv[i]); in prom_init_cmdline()
|
/Linux-v4.19/arch/mips/pci/ |
D | ops-vr41xx.c | 32 #define PCICONFDREG (void __iomem *)KSEG1ADDR(0x0f000c14) 33 #define PCICONFAREG (void __iomem *)KSEG1ADDR(0x0f000c18)
|
D | ops-nile4.c | 51 KSEG1ADDR(PCI_WINDOW1) + in nile4_pcibios_config_access() 55 adr = KSEG1ADDR(PCI_WINDOW1) | (busnum << 16) | (devfn << 8) | in nile4_pcibios_config_access()
|
/Linux-v4.19/arch/mips/alchemy/devboards/ |
D | db1550.c | 48 base = (void __iomem *)KSEG1ADDR(AU1550_PSC1_PHYS_ADDR); in db1550_hw_setup() 601 (void __iomem *)KSEG1ADDR(AU1550_PSC1_PHYS_ADDR) + PSC_SEL_OFFSET); in db1550_dev_setup() 604 (void __iomem *)KSEG1ADDR(AU1550_PSC3_PHYS_ADDR) + PSC_SEL_OFFSET); in db1550_dev_setup() 608 (void __iomem *)KSEG1ADDR(AU1550_PSC0_PHYS_ADDR) + PSC_SEL_OFFSET); in db1550_dev_setup() 611 (void __iomem *)KSEG1ADDR(AU1550_PSC2_PHYS_ADDR) + PSC_SEL_OFFSET); in db1550_dev_setup()
|
/Linux-v4.19/arch/mips/vr41xx/common/ |
D | bcu.c | 40 #define CLKSPEEDREG_TYPE1 (void __iomem *)KSEG1ADDR(0x0b000014) 41 #define CLKSPEEDREG_TYPE2 (void __iomem *)KSEG1ADDR(0x0f000014)
|