1 /* 2 * scc2698.h 3 * 4 * driver for the IPOCTAL boards 5 * 6 * Copyright (C) 2009-2012 CERN (www.cern.ch) 7 * Author: Nicolas Serafini, EIC2 SA 8 * Author: Samuel Iglesias Gonsalvez <siglesias@igalia.com> 9 * 10 * This program is free software; you can redistribute it and/or modify it 11 * under the terms of the GNU General Public License as published by the Free 12 * Software Foundation; version 2 of the License. 13 */ 14 15 #ifndef SCC2698_H_ 16 #define SCC2698_H_ 17 18 /* 19 * union scc2698_channel - Channel access to scc2698 IO 20 * 21 * dn value are only spacer. 22 * 23 */ 24 union scc2698_channel { 25 struct { 26 u8 d0, mr; /* Mode register 1/2*/ 27 u8 d1, sr; /* Status register */ 28 u8 d2, r1; /* reserved */ 29 u8 d3, rhr; /* Receive holding register (R) */ 30 u8 junk[8]; /* other crap for block control */ 31 } __packed r; /* Read access */ 32 struct { 33 u8 d0, mr; /* Mode register 1/2 */ 34 u8 d1, csr; /* Clock select register */ 35 u8 d2, cr; /* Command register */ 36 u8 d3, thr; /* Transmit holding register */ 37 u8 junk[8]; /* other crap for block control */ 38 } __packed w; /* Write access */ 39 }; 40 41 /* 42 * union scc2698_block - Block access to scc2698 IO 43 * 44 * The scc2698 contain 4 block. 45 * Each block containt two channel a and b. 46 * dn value are only spacer. 47 * 48 */ 49 union scc2698_block { 50 struct { 51 u8 d0, mra; /* Mode register 1/2 (a) */ 52 u8 d1, sra; /* Status register (a) */ 53 u8 d2, r1; /* reserved */ 54 u8 d3, rhra; /* Receive holding register (a) */ 55 u8 d4, ipcr; /* Input port change register of block */ 56 u8 d5, isr; /* Interrupt status register of block */ 57 u8 d6, ctur; /* Counter timer upper register of block */ 58 u8 d7, ctlr; /* Counter timer lower register of block */ 59 u8 d8, mrb; /* Mode register 1/2 (b) */ 60 u8 d9, srb; /* Status register (b) */ 61 u8 da, r2; /* reserved */ 62 u8 db, rhrb; /* Receive holding register (b) */ 63 u8 dc, r3; /* reserved */ 64 u8 dd, ip; /* Input port register of block */ 65 u8 de, ctg; /* Start counter timer of block */ 66 u8 df, cts; /* Stop counter timer of block */ 67 } __packed r; /* Read access */ 68 struct { 69 u8 d0, mra; /* Mode register 1/2 (a) */ 70 u8 d1, csra; /* Clock select register (a) */ 71 u8 d2, cra; /* Command register (a) */ 72 u8 d3, thra; /* Transmit holding register (a) */ 73 u8 d4, acr; /* Auxiliary control register of block */ 74 u8 d5, imr; /* Interrupt mask register of block */ 75 u8 d6, ctu; /* Counter timer upper register of block */ 76 u8 d7, ctl; /* Counter timer lower register of block */ 77 u8 d8, mrb; /* Mode register 1/2 (b) */ 78 u8 d9, csrb; /* Clock select register (a) */ 79 u8 da, crb; /* Command register (b) */ 80 u8 db, thrb; /* Transmit holding register (b) */ 81 u8 dc, r1; /* reserved */ 82 u8 dd, opcr; /* Output port configuration register of block */ 83 u8 de, r2; /* reserved */ 84 u8 df, r3; /* reserved */ 85 } __packed w; /* Write access */ 86 }; 87 88 #define MR1_CHRL_5_BITS (0x0 << 0) 89 #define MR1_CHRL_6_BITS (0x1 << 0) 90 #define MR1_CHRL_7_BITS (0x2 << 0) 91 #define MR1_CHRL_8_BITS (0x3 << 0) 92 #define MR1_PARITY_EVEN (0x1 << 2) 93 #define MR1_PARITY_ODD (0x0 << 2) 94 #define MR1_PARITY_ON (0x0 << 3) 95 #define MR1_PARITY_FORCE (0x1 << 3) 96 #define MR1_PARITY_OFF (0x2 << 3) 97 #define MR1_PARITY_SPECIAL (0x3 << 3) 98 #define MR1_ERROR_CHAR (0x0 << 5) 99 #define MR1_ERROR_BLOCK (0x1 << 5) 100 #define MR1_RxINT_RxRDY (0x0 << 6) 101 #define MR1_RxINT_FFULL (0x1 << 6) 102 #define MR1_RxRTS_CONTROL_ON (0x1 << 7) 103 #define MR1_RxRTS_CONTROL_OFF (0x0 << 7) 104 105 #define MR2_STOP_BITS_LENGTH_1 (0x7 << 0) 106 #define MR2_STOP_BITS_LENGTH_2 (0xF << 0) 107 #define MR2_CTS_ENABLE_TX_ON (0x1 << 4) 108 #define MR2_CTS_ENABLE_TX_OFF (0x0 << 4) 109 #define MR2_TxRTS_CONTROL_ON (0x1 << 5) 110 #define MR2_TxRTS_CONTROL_OFF (0x0 << 5) 111 #define MR2_CH_MODE_NORMAL (0x0 << 6) 112 #define MR2_CH_MODE_ECHO (0x1 << 6) 113 #define MR2_CH_MODE_LOCAL (0x2 << 6) 114 #define MR2_CH_MODE_REMOTE (0x3 << 6) 115 116 #define CR_ENABLE_RX (0x1 << 0) 117 #define CR_DISABLE_RX (0x1 << 1) 118 #define CR_ENABLE_TX (0x1 << 2) 119 #define CR_DISABLE_TX (0x1 << 3) 120 #define CR_CMD_RESET_MR (0x1 << 4) 121 #define CR_CMD_RESET_RX (0x2 << 4) 122 #define CR_CMD_RESET_TX (0x3 << 4) 123 #define CR_CMD_RESET_ERR_STATUS (0x4 << 4) 124 #define CR_CMD_RESET_BREAK_CHANGE (0x5 << 4) 125 #define CR_CMD_START_BREAK (0x6 << 4) 126 #define CR_CMD_STOP_BREAK (0x7 << 4) 127 #define CR_CMD_ASSERT_RTSN (0x8 << 4) 128 #define CR_CMD_NEGATE_RTSN (0x9 << 4) 129 #define CR_CMD_SET_TIMEOUT_MODE (0xA << 4) 130 #define CR_CMD_DISABLE_TIMEOUT_MODE (0xC << 4) 131 132 #define SR_RX_READY (0x1 << 0) 133 #define SR_FIFO_FULL (0x1 << 1) 134 #define SR_TX_READY (0x1 << 2) 135 #define SR_TX_EMPTY (0x1 << 3) 136 #define SR_OVERRUN_ERROR (0x1 << 4) 137 #define SR_PARITY_ERROR (0x1 << 5) 138 #define SR_FRAMING_ERROR (0x1 << 6) 139 #define SR_RECEIVED_BREAK (0x1 << 7) 140 141 #define SR_ERROR (0xF0) 142 143 #define ACR_DELTA_IP0_IRQ_EN (0x1 << 0) 144 #define ACR_DELTA_IP1_IRQ_EN (0x1 << 1) 145 #define ACR_DELTA_IP2_IRQ_EN (0x1 << 2) 146 #define ACR_DELTA_IP3_IRQ_EN (0x1 << 3) 147 #define ACR_CT_Mask (0x7 << 4) 148 #define ACR_CExt (0x0 << 4) 149 #define ACR_CTxCA (0x1 << 4) 150 #define ACR_CTxCB (0x2 << 4) 151 #define ACR_CClk16 (0x3 << 4) 152 #define ACR_TExt (0x4 << 4) 153 #define ACR_TExt16 (0x5 << 4) 154 #define ACR_TClk (0x6 << 4) 155 #define ACR_TClk16 (0x7 << 4) 156 #define ACR_BRG_SET1 (0x0 << 7) 157 #define ACR_BRG_SET2 (0x1 << 7) 158 159 #define TX_CLK_75 (0x0 << 0) 160 #define TX_CLK_110 (0x1 << 0) 161 #define TX_CLK_38400 (0x2 << 0) 162 #define TX_CLK_150 (0x3 << 0) 163 #define TX_CLK_300 (0x4 << 0) 164 #define TX_CLK_600 (0x5 << 0) 165 #define TX_CLK_1200 (0x6 << 0) 166 #define TX_CLK_2000 (0x7 << 0) 167 #define TX_CLK_2400 (0x8 << 0) 168 #define TX_CLK_4800 (0x9 << 0) 169 #define TX_CLK_1800 (0xA << 0) 170 #define TX_CLK_9600 (0xB << 0) 171 #define TX_CLK_19200 (0xC << 0) 172 #define RX_CLK_75 (0x0 << 4) 173 #define RX_CLK_110 (0x1 << 4) 174 #define RX_CLK_38400 (0x2 << 4) 175 #define RX_CLK_150 (0x3 << 4) 176 #define RX_CLK_300 (0x4 << 4) 177 #define RX_CLK_600 (0x5 << 4) 178 #define RX_CLK_1200 (0x6 << 4) 179 #define RX_CLK_2000 (0x7 << 4) 180 #define RX_CLK_2400 (0x8 << 4) 181 #define RX_CLK_4800 (0x9 << 4) 182 #define RX_CLK_1800 (0xA << 4) 183 #define RX_CLK_9600 (0xB << 4) 184 #define RX_CLK_19200 (0xC << 4) 185 186 #define OPCR_MPOa_RTSN (0x0 << 0) 187 #define OPCR_MPOa_C_TO (0x1 << 0) 188 #define OPCR_MPOa_TxC1X (0x2 << 0) 189 #define OPCR_MPOa_TxC16X (0x3 << 0) 190 #define OPCR_MPOa_RxC1X (0x4 << 0) 191 #define OPCR_MPOa_RxC16X (0x5 << 0) 192 #define OPCR_MPOa_TxRDY (0x6 << 0) 193 #define OPCR_MPOa_RxRDY_FF (0x7 << 0) 194 195 #define OPCR_MPOb_RTSN (0x0 << 4) 196 #define OPCR_MPOb_C_TO (0x1 << 4) 197 #define OPCR_MPOb_TxC1X (0x2 << 4) 198 #define OPCR_MPOb_TxC16X (0x3 << 4) 199 #define OPCR_MPOb_RxC1X (0x4 << 4) 200 #define OPCR_MPOb_RxC16X (0x5 << 4) 201 #define OPCR_MPOb_TxRDY (0x6 << 4) 202 #define OPCR_MPOb_RxRDY_FF (0x7 << 4) 203 204 #define OPCR_MPP_INPUT (0x0 << 7) 205 #define OPCR_MPP_OUTPUT (0x1 << 7) 206 207 #define IMR_TxRDY_A (0x1 << 0) 208 #define IMR_RxRDY_FFULL_A (0x1 << 1) 209 #define IMR_DELTA_BREAK_A (0x1 << 2) 210 #define IMR_COUNTER_READY (0x1 << 3) 211 #define IMR_TxRDY_B (0x1 << 4) 212 #define IMR_RxRDY_FFULL_B (0x1 << 5) 213 #define IMR_DELTA_BREAK_B (0x1 << 6) 214 #define IMR_INPUT_PORT_CHANGE (0x1 << 7) 215 216 #define ISR_TxRDY_A (0x1 << 0) 217 #define ISR_RxRDY_FFULL_A (0x1 << 1) 218 #define ISR_DELTA_BREAK_A (0x1 << 2) 219 #define ISR_COUNTER_READY (0x1 << 3) 220 #define ISR_TxRDY_B (0x1 << 4) 221 #define ISR_RxRDY_FFULL_B (0x1 << 5) 222 #define ISR_DELTA_BREAK_B (0x1 << 6) 223 #define ISR_INPUT_PORT_CHANGE (0x1 << 7) 224 225 #define ACK_INT_REQ0 0 226 #define ACK_INT_REQ1 2 227 228 #endif /* SCC2698_H_ */ 229
