| /Linux-v4.19/drivers/media/usb/dvb-usb/ |
| D | dib07x0.h | 13 GPIO7 = 10, enumerator
|
| D | dib0700_devices.c | 288 dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); in stk7700P2_frontend_attach()
321 dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); in stk7700d_frontend_attach()
473 dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); in stk7700ph_frontend_attach()
1003 dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); in stk7070p_frontend_attach()
1061 dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); in stk7770p_frontend_attach()
1357 dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); in stk807x_frontend_attach()
1391 dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); in stk807xpvr_frontend_attach0()
1769 dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); in stk809x_frontend_attach()
1838 dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); in nim8096md_frontend_attach()
2169 dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); in tfe8096p_frontend_attach()
[all …]
|
| /Linux-v4.19/Documentation/devicetree/bindings/pinctrl/ |
| D | pinctrl-palmas.txt | 39 GPIO7 is configured in POWERHOLD mode which has higher priority
42 POWERHOLD value to GPIO7 so as to turn off the PMIC in power off
43 scenarios. So for GPIO7 if ti,palmas-override-powerhold is set
|
| /Linux-v4.19/drivers/pinctrl/ |
| D | pinctrl-xway.c | 126 MFP_XWAY(GPIO7, GPIO, CGU, PCI, GPHY),
185 static const unsigned pins_gphy0_led1[] = {GPIO7};
228 static const unsigned pins_clkout1[] = {GPIO7};
362 MFP_XWAY(GPIO7, GPIO, SPI, MII, JTAG),
395 static const unsigned ase_pins_jtag[] = {GPIO7, GPIO8, GPIO9, GPIO10, GPIO11};
409 static const unsigned ase_pins_spi_cs1[] = {GPIO7};
490 MFP_XWAY(GPIO7, GPIO, CGU, CBUS, MII),
559 static const unsigned danube_pins_clkout1[] = {GPIO7};
665 MFP_XWAY(GPIO7, GPIO, CGU, CBUS, NONE),
762 static const unsigned xrx100_pins_clkout1[] = {GPIO7};
[all …]
|
| D | pinctrl-lantiq.h | 116 GPIO7, enumerator
|
| D | pinctrl-falcon.c | 121 MFP_FALCON(GPIO7, MDIO, GPIO, NONE, NONE),
175 static const unsigned pins_mdio[] = {GPIO7, GPIO8};
|
| D | pinctrl-max77620.c | 177 MAX77620_PINGROUP(gpio7, GPIO7, REFERENCE_OUT),
|
| D | pinctrl-as3722.c | 171 AS3722_PINGROUP(gpio7, GPIO7),
|
| /Linux-v4.19/arch/arm/boot/dts/ |
| D | bcm2835-rpi-cm1-io1.dts | 27 "GPIO7",
|
| D | tegra124-apalis-v1.2-eval.dts | 243 /* Apalis GPIO7 MXM3 pin 15 PLX PEX 8605 PCIe Switch Reset */
|
| D | tegra124-apalis-eval.dts | 278 /* Apalis GPIO7 MXM3 pin 15 PLX PEX 8605 PCIe Switch Reset */
|
| D | keystone-k2l.dtsi | 188 * GPIO_TIMIO_SEL[7]: 0-GPIO7, 1-TIMI5
|
| D | qcom-apq8060-dragonboard.dts | 592 * GPIO7 has interrupt 198 on the PM8058
|
| /Linux-v4.19/arch/arm/mach-pxa/ |
| D | mfp-pxa25x.h | 13 #define GPIO7_GPIO MFP_CFG_IN(GPIO7, AF0)
21 #define GPIO7_48MHz MFP_CFG_OUT(GPIO7, AF1, DRIVE_LOW)
|
| D | mfp-pxa300.h | 136 #define GPIO7_KP_MKOUT_5 MFP_CFG_LPM(GPIO7, AF1, DRIVE_HIGH)
214 #define GPIO7_MMC1_CLK MFP_CFG_LPM(GPIO7, AF4, DRIVE_HIGH)
393 #define GPIO7_UART3_RXD MFP_CFG_LPM(GPIO7, AF2, FLOAT)
400 #define GPIO7_UART3_TXD MFP_CFG_LPM(GPIO7, AF6, FLOAT)
433 #define GPIO7_CLK_BYPASS_XSC MFP_CFG(GPIO7, AF7)
|
| D | pxa930.c | 33 MFP_ADDR(GPIO7, 0x02fc),
|
| D | mfp-pxa320.h | 208 #define GPIO7_MMC1_DAT2 MFP_CFG_LPM(GPIO7, AF4, DRIVE_HIGH)
224 #define GPIO7_MMC2_DAT2 MFP_CFG_LPM(GPIO7, AF2, PULL_HIGH)
453 #define GPIO7_NPIOS16 MFP_CFG(GPIO7, AF3)
|
| D | mfp-pxa3xx.h | 19 #define GPIO7_GPIO MFP_CFG(GPIO7, AF0)
|
| D | mfp-pxa930.h | 131 #define GPIO7_KP_DKIN_7 MFP_CFG_LPM(GPIO7, AF3, FLOAT)
162 #define GPIO7_KP_MKOUT_3 MFP_CFG_LPM(GPIO7, AF1, DRIVE_HIGH)
|
| /Linux-v4.19/arch/arm/mach-mmp/ |
| D | mfp-pxa168.h | 29 #define GPIO7_GPIO MFP_CFG(GPIO7, AF5)
154 #define GPIO7_DFI_D8 MFP_CFG(GPIO7, AF0)
|
| D | mfp-pxa910.h | 75 #define GPIO07_KP_MKOUT3 MFP_CFG(GPIO7, AF1)
|
| D | mfp-mmp2.h | 20 #define GPIO7_GPIO MFP_CFG(GPIO7, AF0)
360 #define GPIO07_KP_MKOUT3 MFP_CFG(GPIO7, AF1)
|
| /Linux-v4.19/Documentation/hwmon/ |
| D | lm93 | 257 LSB is GPIO0, and the MSB is GPIO7.
|
| /Linux-v4.19/drivers/mfd/ |
| D | db8500-prcmu.c | 327 IRQ_ENTRY(GPIO7),
|
