1/* SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause) */
2/*
3 * Copyright (C) 2020 STMicroelectronics - All Rights Reserved
4 * Copyright (C) 2020 Ahmad Fatoum, Pengutronix
5 */
6
7#include "stm32mp15-pinctrl.dtsi"
8
9#include <dt-bindings/mfd/st,stpmic1.h>
10
11/ {
12	reserved-memory {
13		#address-cells = <1>;
14		#size-cells = <1>;
15		ranges;
16
17		mcuram2: mcuram2@10000000 {
18			compatible = "shared-dma-pool";
19			reg = <0x10000000 0x40000>;
20			no-map;
21		};
22
23		vdev0vring0: vdev0vring0@10040000 {
24			compatible = "shared-dma-pool";
25			reg = <0x10040000 0x1000>;
26			no-map;
27		};
28
29		vdev0vring1: vdev0vring1@10041000 {
30			compatible = "shared-dma-pool";
31			reg = <0x10041000 0x1000>;
32			no-map;
33		};
34
35		vdev0buffer: vdev0buffer@10042000 {
36			compatible = "shared-dma-pool";
37			reg = <0x10042000 0x4000>;
38			no-map;
39		};
40
41		mcuram: mcuram@30000000 {
42			compatible = "shared-dma-pool";
43			reg = <0x30000000 0x40000>;
44			no-map;
45		};
46
47		retram: retram@38000000 {
48			compatible = "shared-dma-pool";
49			reg = <0x38000000 0x10000>;
50			no-map;
51		};
52	};
53
54	reg_sip_eeprom: regulator_eeprom {
55		compatible = "regulator-fixed";
56		regulator-name = "sip_eeprom";
57		regulator-always-on;
58	};
59};
60
61&i2c4 {
62	pinctrl-names = "default", "sleep";
63	pinctrl-0 = <&i2c4_pins_a>;
64	pinctrl-1 = <&i2c4_sleep_pins_a>;
65	clock-frequency = <400000>;
66	i2c-scl-rising-time-ns = <185>;
67	i2c-scl-falling-time-ns = <20>;
68	status = "okay";
69
70	pmic: stpmic@33 {
71		compatible = "st,stpmic1";
72		reg = <0x33>;
73		interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>;
74		interrupt-controller;
75		#interrupt-cells = <2>;
76
77		regulators {
78			compatible = "st,stpmic1-regulators";
79
80			ldo1-supply = <&v3v3>;
81			ldo6-supply = <&v3v3>;
82			pwr_sw1-supply = <&bst_out>;
83
84			vddcore: buck1 {
85				regulator-name = "vddcore";
86				regulator-min-microvolt = <1200000>;
87				regulator-max-microvolt = <1350000>;
88				regulator-always-on;
89				regulator-initial-mode = <0>;
90				regulator-over-current-protection;
91			};
92
93			vdd_ddr: buck2 {
94				regulator-name = "vdd_ddr";
95				regulator-min-microvolt = <1350000>;
96				regulator-max-microvolt = <1350000>;
97				regulator-always-on;
98				regulator-initial-mode = <0>;
99				regulator-over-current-protection;
100			};
101
102			vdd: buck3 {
103				regulator-name = "vdd";
104				regulator-min-microvolt = <3300000>;
105				regulator-max-microvolt = <3300000>;
106				regulator-always-on;
107				st,mask-reset;
108				regulator-initial-mode = <0>;
109				regulator-over-current-protection;
110			};
111
112			v3v3: buck4 {
113				regulator-name = "v3v3";
114				regulator-min-microvolt = <3300000>;
115				regulator-max-microvolt = <3300000>;
116				regulator-always-on;
117				regulator-over-current-protection;
118				regulator-initial-mode = <0>;
119			};
120
121			v1v8_audio: ldo1 {
122				regulator-name = "v1v8_audio";
123				regulator-min-microvolt = <1800000>;
124				regulator-max-microvolt = <1800000>;
125				regulator-always-on;
126				interrupts = <IT_CURLIM_LDO1 0>;
127
128			};
129
130			v3v3_hdmi: ldo2 {
131				regulator-name = "v3v3_hdmi";
132				regulator-min-microvolt = <3300000>;
133				regulator-max-microvolt = <3300000>;
134				regulator-always-on;
135				interrupts = <IT_CURLIM_LDO2 0>;
136
137			};
138
139			vtt_ddr: ldo3 {
140				regulator-name = "vtt_ddr";
141				regulator-min-microvolt = <500000>;
142				regulator-max-microvolt = <750000>;
143				regulator-always-on;
144				regulator-over-current-protection;
145			};
146
147			vdd_usb: ldo4 {
148				regulator-name = "vdd_usb";
149				regulator-min-microvolt = <3300000>;
150				regulator-max-microvolt = <3300000>;
151				interrupts = <IT_CURLIM_LDO4 0>;
152			};
153
154			vdda: ldo5 {
155				regulator-name = "vdda";
156				regulator-min-microvolt = <2900000>;
157				regulator-max-microvolt = <2900000>;
158				interrupts = <IT_CURLIM_LDO5 0>;
159				regulator-boot-on;
160			};
161
162			v1v2_hdmi: ldo6 {
163				regulator-name = "v1v2_hdmi";
164				regulator-min-microvolt = <1200000>;
165				regulator-max-microvolt = <1200000>;
166				regulator-always-on;
167				interrupts = <IT_CURLIM_LDO6 0>;
168
169			};
170
171			vref_ddr: vref_ddr {
172				regulator-name = "vref_ddr";
173				regulator-always-on;
174				regulator-over-current-protection;
175			};
176
177			bst_out: boost {
178				regulator-name = "bst_out";
179				interrupts = <IT_OCP_BOOST 0>;
180			};
181
182			vbus_otg: pwr_sw1 {
183				regulator-name = "vbus_otg";
184				interrupts = <IT_OCP_OTG 0>;
185				regulator-active-discharge;
186			};
187
188			vbus_sw: pwr_sw2 {
189				regulator-name = "vbus_sw";
190				interrupts = <IT_OCP_SWOUT 0>;
191				regulator-active-discharge;
192			};
193		};
194
195		onkey {
196			compatible = "st,stpmic1-onkey";
197			interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 1>;
198			interrupt-names = "onkey-falling", "onkey-rising";
199		};
200
201		pmic_watchdog: watchdog {
202			compatible = "st,stpmic1-wdt";
203			status = "disabled";
204		};
205	};
206
207	sip_eeprom: eeprom@50 {
208		compatible = "atmel,24c32";
209		vcc-supply = <&reg_sip_eeprom>;
210		reg = <0x50>;
211	};
212};
213
214&ipcc {
215	status = "okay";
216};
217
218&m4_rproc {
219	memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>,
220			<&vdev0vring1>, <&vdev0buffer>;
221	mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>;
222	mbox-names = "vq0", "vq1", "shutdown";
223	interrupt-parent = <&exti>;
224	interrupts = <68 1>;
225	status = "okay";
226};
227
228&rng1 {
229	status = "okay";
230};
231