1/* 2 * Copyright 2015 - Maxime Coquelin <mcoquelin.stm32@gmail.com> 3 * 4 * This file is dual-licensed: you can use it either under the terms 5 * of the GPL or the X11 license, at your option. Note that this dual 6 * licensing only applies to this file, and not this project as a 7 * whole. 8 * 9 * a) This file is free software; you can redistribute it and/or 10 * modify it under the terms of the GNU General Public License as 11 * published by the Free Software Foundation; either version 2 of the 12 * License, or (at your option) any later version. 13 * 14 * This file is distributed in the hope that it will be useful, 15 * but WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 * GNU General Public License for more details. 18 * 19 * You should have received a copy of the GNU General Public 20 * License along with this file; if not, write to the Free 21 * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, 22 * MA 02110-1301 USA 23 * 24 * Or, alternatively, 25 * 26 * b) Permission is hereby granted, free of charge, to any person 27 * obtaining a copy of this software and associated documentation 28 * files (the "Software"), to deal in the Software without 29 * restriction, including without limitation the rights to use, 30 * copy, modify, merge, publish, distribute, sublicense, and/or 31 * sell copies of the Software, and to permit persons to whom the 32 * Software is furnished to do so, subject to the following 33 * conditions: 34 * 35 * The above copyright notice and this permission notice shall be 36 * included in all copies or substantial portions of the Software. 37 * 38 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 39 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES 40 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 41 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT 42 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, 43 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 44 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR 45 * OTHER DEALINGS IN THE SOFTWARE. 46 */ 47 48#include "armv7-m.dtsi" 49#include <dt-bindings/clock/stm32fx-clock.h> 50#include <dt-bindings/mfd/stm32f4-rcc.h> 51 52/ { 53 #address-cells = <1>; 54 #size-cells = <1>; 55 56 clocks { 57 clk_hse: clk-hse { 58 #clock-cells = <0>; 59 compatible = "fixed-clock"; 60 clock-frequency = <0>; 61 }; 62 63 clk_lse: clk-lse { 64 #clock-cells = <0>; 65 compatible = "fixed-clock"; 66 clock-frequency = <32768>; 67 }; 68 69 clk_lsi: clk-lsi { 70 #clock-cells = <0>; 71 compatible = "fixed-clock"; 72 clock-frequency = <32000>; 73 }; 74 75 clk_i2s_ckin: i2s-ckin { 76 #clock-cells = <0>; 77 compatible = "fixed-clock"; 78 clock-frequency = <0>; 79 }; 80 }; 81 82 soc { 83 romem: efuse@1fff7800 { 84 compatible = "st,stm32f4-otp"; 85 reg = <0x1fff7800 0x400>; 86 #address-cells = <1>; 87 #size-cells = <1>; 88 ts_cal1: calib@22c { 89 reg = <0x22c 0x2>; 90 }; 91 ts_cal2: calib@22e { 92 reg = <0x22e 0x2>; 93 }; 94 }; 95 96 timer2: timer@40000000 { 97 compatible = "st,stm32-timer"; 98 reg = <0x40000000 0x400>; 99 interrupts = <28>; 100 clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM2)>; 101 status = "disabled"; 102 }; 103 104 timers2: timers@40000000 { 105 #address-cells = <1>; 106 #size-cells = <0>; 107 compatible = "st,stm32-timers"; 108 reg = <0x40000000 0x400>; 109 clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM2)>; 110 clock-names = "int"; 111 status = "disabled"; 112 113 pwm { 114 compatible = "st,stm32-pwm"; 115 #pwm-cells = <3>; 116 status = "disabled"; 117 }; 118 119 timer@1 { 120 compatible = "st,stm32-timer-trigger"; 121 reg = <1>; 122 status = "disabled"; 123 }; 124 }; 125 126 timer3: timer@40000400 { 127 compatible = "st,stm32-timer"; 128 reg = <0x40000400 0x400>; 129 interrupts = <29>; 130 clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM3)>; 131 status = "disabled"; 132 }; 133 134 timers3: timers@40000400 { 135 #address-cells = <1>; 136 #size-cells = <0>; 137 compatible = "st,stm32-timers"; 138 reg = <0x40000400 0x400>; 139 clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM3)>; 140 clock-names = "int"; 141 status = "disabled"; 142 143 pwm { 144 compatible = "st,stm32-pwm"; 145 #pwm-cells = <3>; 146 status = "disabled"; 147 }; 148 149 timer@2 { 150 compatible = "st,stm32-timer-trigger"; 151 reg = <2>; 152 status = "disabled"; 153 }; 154 }; 155 156 timer4: timer@40000800 { 157 compatible = "st,stm32-timer"; 158 reg = <0x40000800 0x400>; 159 interrupts = <30>; 160 clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM4)>; 161 status = "disabled"; 162 }; 163 164 timers4: timers@40000800 { 165 #address-cells = <1>; 166 #size-cells = <0>; 167 compatible = "st,stm32-timers"; 168 reg = <0x40000800 0x400>; 169 clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM4)>; 170 clock-names = "int"; 171 status = "disabled"; 172 173 pwm { 174 compatible = "st,stm32-pwm"; 175 #pwm-cells = <3>; 176 status = "disabled"; 177 }; 178 179 timer@3 { 180 compatible = "st,stm32-timer-trigger"; 181 reg = <3>; 182 status = "disabled"; 183 }; 184 }; 185 186 timer5: timer@40000c00 { 187 compatible = "st,stm32-timer"; 188 reg = <0x40000c00 0x400>; 189 interrupts = <50>; 190 clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM5)>; 191 }; 192 193 timers5: timers@40000c00 { 194 #address-cells = <1>; 195 #size-cells = <0>; 196 compatible = "st,stm32-timers"; 197 reg = <0x40000C00 0x400>; 198 clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM5)>; 199 clock-names = "int"; 200 status = "disabled"; 201 202 pwm { 203 compatible = "st,stm32-pwm"; 204 #pwm-cells = <3>; 205 status = "disabled"; 206 }; 207 208 timer@4 { 209 compatible = "st,stm32-timer-trigger"; 210 reg = <4>; 211 status = "disabled"; 212 }; 213 }; 214 215 timer6: timer@40001000 { 216 compatible = "st,stm32-timer"; 217 reg = <0x40001000 0x400>; 218 interrupts = <54>; 219 clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM6)>; 220 status = "disabled"; 221 }; 222 223 timers6: timers@40001000 { 224 #address-cells = <1>; 225 #size-cells = <0>; 226 compatible = "st,stm32-timers"; 227 reg = <0x40001000 0x400>; 228 clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM6)>; 229 clock-names = "int"; 230 status = "disabled"; 231 232 timer@5 { 233 compatible = "st,stm32-timer-trigger"; 234 reg = <5>; 235 status = "disabled"; 236 }; 237 }; 238 239 timer7: timer@40001400 { 240 compatible = "st,stm32-timer"; 241 reg = <0x40001400 0x400>; 242 interrupts = <55>; 243 clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM7)>; 244 status = "disabled"; 245 }; 246 247 timers7: timers@40001400 { 248 #address-cells = <1>; 249 #size-cells = <0>; 250 compatible = "st,stm32-timers"; 251 reg = <0x40001400 0x400>; 252 clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM7)>; 253 clock-names = "int"; 254 status = "disabled"; 255 256 timer@6 { 257 compatible = "st,stm32-timer-trigger"; 258 reg = <6>; 259 status = "disabled"; 260 }; 261 }; 262 263 timers12: timers@40001800 { 264 #address-cells = <1>; 265 #size-cells = <0>; 266 compatible = "st,stm32-timers"; 267 reg = <0x40001800 0x400>; 268 clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM12)>; 269 clock-names = "int"; 270 status = "disabled"; 271 272 pwm { 273 compatible = "st,stm32-pwm"; 274 #pwm-cells = <3>; 275 status = "disabled"; 276 }; 277 278 timer@11 { 279 compatible = "st,stm32-timer-trigger"; 280 reg = <11>; 281 status = "disabled"; 282 }; 283 }; 284 285 timers13: timers@40001c00 { 286 #address-cells = <1>; 287 #size-cells = <0>; 288 compatible = "st,stm32-timers"; 289 reg = <0x40001C00 0x400>; 290 clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM13)>; 291 clock-names = "int"; 292 status = "disabled"; 293 294 pwm { 295 compatible = "st,stm32-pwm"; 296 #pwm-cells = <3>; 297 status = "disabled"; 298 }; 299 }; 300 301 timers14: timers@40002000 { 302 #address-cells = <1>; 303 #size-cells = <0>; 304 compatible = "st,stm32-timers"; 305 reg = <0x40002000 0x400>; 306 clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM14)>; 307 clock-names = "int"; 308 status = "disabled"; 309 310 pwm { 311 compatible = "st,stm32-pwm"; 312 #pwm-cells = <3>; 313 status = "disabled"; 314 }; 315 }; 316 317 rtc: rtc@40002800 { 318 compatible = "st,stm32-rtc"; 319 reg = <0x40002800 0x400>; 320 clocks = <&rcc 1 CLK_RTC>; 321 assigned-clocks = <&rcc 1 CLK_RTC>; 322 assigned-clock-parents = <&rcc 1 CLK_LSE>; 323 interrupt-parent = <&exti>; 324 interrupts = <17 1>; 325 st,syscfg = <&pwrcfg 0x00 0x100>; 326 status = "disabled"; 327 }; 328 329 iwdg: watchdog@40003000 { 330 compatible = "st,stm32-iwdg"; 331 reg = <0x40003000 0x400>; 332 clocks = <&clk_lsi>; 333 clock-names = "lsi"; 334 status = "disabled"; 335 }; 336 337 spi2: spi@40003800 { 338 #address-cells = <1>; 339 #size-cells = <0>; 340 compatible = "st,stm32f4-spi"; 341 reg = <0x40003800 0x400>; 342 interrupts = <36>; 343 clocks = <&rcc 0 STM32F4_APB1_CLOCK(SPI2)>; 344 status = "disabled"; 345 }; 346 347 spi3: spi@40003c00 { 348 #address-cells = <1>; 349 #size-cells = <0>; 350 compatible = "st,stm32f4-spi"; 351 reg = <0x40003c00 0x400>; 352 interrupts = <51>; 353 clocks = <&rcc 0 STM32F4_APB1_CLOCK(SPI3)>; 354 status = "disabled"; 355 }; 356 357 usart2: serial@40004400 { 358 compatible = "st,stm32-uart"; 359 reg = <0x40004400 0x400>; 360 interrupts = <38>; 361 clocks = <&rcc 0 STM32F4_APB1_CLOCK(UART2)>; 362 status = "disabled"; 363 }; 364 365 usart3: serial@40004800 { 366 compatible = "st,stm32-uart"; 367 reg = <0x40004800 0x400>; 368 interrupts = <39>; 369 clocks = <&rcc 0 STM32F4_APB1_CLOCK(UART3)>; 370 status = "disabled"; 371 dmas = <&dma1 1 4 0x400 0x0>, 372 <&dma1 3 4 0x400 0x0>; 373 dma-names = "rx", "tx"; 374 }; 375 376 usart4: serial@40004c00 { 377 compatible = "st,stm32-uart"; 378 reg = <0x40004c00 0x400>; 379 interrupts = <52>; 380 clocks = <&rcc 0 STM32F4_APB1_CLOCK(UART4)>; 381 status = "disabled"; 382 }; 383 384 usart5: serial@40005000 { 385 compatible = "st,stm32-uart"; 386 reg = <0x40005000 0x400>; 387 interrupts = <53>; 388 clocks = <&rcc 0 STM32F4_APB1_CLOCK(UART5)>; 389 status = "disabled"; 390 }; 391 392 i2c1: i2c@40005400 { 393 compatible = "st,stm32f4-i2c"; 394 reg = <0x40005400 0x400>; 395 interrupts = <31>, 396 <32>; 397 resets = <&rcc STM32F4_APB1_RESET(I2C1)>; 398 clocks = <&rcc 0 STM32F4_APB1_CLOCK(I2C1)>; 399 #address-cells = <1>; 400 #size-cells = <0>; 401 status = "disabled"; 402 }; 403 404 i2c3: i2c@40005c00 { 405 compatible = "st,stm32f4-i2c"; 406 reg = <0x40005c00 0x400>; 407 interrupts = <72>, 408 <73>; 409 resets = <&rcc STM32F4_APB1_RESET(I2C3)>; 410 clocks = <&rcc 0 STM32F4_APB1_CLOCK(I2C3)>; 411 #address-cells = <1>; 412 #size-cells = <0>; 413 status = "disabled"; 414 }; 415 416 dac: dac@40007400 { 417 compatible = "st,stm32f4-dac-core"; 418 reg = <0x40007400 0x400>; 419 resets = <&rcc STM32F4_APB1_RESET(DAC)>; 420 clocks = <&rcc 0 STM32F4_APB1_CLOCK(DAC)>; 421 clock-names = "pclk"; 422 #address-cells = <1>; 423 #size-cells = <0>; 424 status = "disabled"; 425 426 dac1: dac@1 { 427 compatible = "st,stm32-dac"; 428 #io-channel-cells = <1>; 429 reg = <1>; 430 status = "disabled"; 431 }; 432 433 dac2: dac@2 { 434 compatible = "st,stm32-dac"; 435 #io-channel-cells = <1>; 436 reg = <2>; 437 status = "disabled"; 438 }; 439 }; 440 441 usart7: serial@40007800 { 442 compatible = "st,stm32-uart"; 443 reg = <0x40007800 0x400>; 444 interrupts = <82>; 445 clocks = <&rcc 0 STM32F4_APB1_CLOCK(UART7)>; 446 status = "disabled"; 447 }; 448 449 usart8: serial@40007c00 { 450 compatible = "st,stm32-uart"; 451 reg = <0x40007c00 0x400>; 452 interrupts = <83>; 453 clocks = <&rcc 0 STM32F4_APB1_CLOCK(UART8)>; 454 status = "disabled"; 455 }; 456 457 timers1: timers@40010000 { 458 #address-cells = <1>; 459 #size-cells = <0>; 460 compatible = "st,stm32-timers"; 461 reg = <0x40010000 0x400>; 462 clocks = <&rcc 0 STM32F4_APB2_CLOCK(TIM1)>; 463 clock-names = "int"; 464 status = "disabled"; 465 466 pwm { 467 compatible = "st,stm32-pwm"; 468 #pwm-cells = <3>; 469 status = "disabled"; 470 }; 471 472 timer@0 { 473 compatible = "st,stm32-timer-trigger"; 474 reg = <0>; 475 status = "disabled"; 476 }; 477 }; 478 479 timers8: timers@40010400 { 480 #address-cells = <1>; 481 #size-cells = <0>; 482 compatible = "st,stm32-timers"; 483 reg = <0x40010400 0x400>; 484 clocks = <&rcc 0 STM32F4_APB2_CLOCK(TIM8)>; 485 clock-names = "int"; 486 status = "disabled"; 487 488 pwm { 489 compatible = "st,stm32-pwm"; 490 #pwm-cells = <3>; 491 status = "disabled"; 492 }; 493 494 timer@7 { 495 compatible = "st,stm32-timer-trigger"; 496 reg = <7>; 497 status = "disabled"; 498 }; 499 }; 500 501 usart1: serial@40011000 { 502 compatible = "st,stm32-uart"; 503 reg = <0x40011000 0x400>; 504 interrupts = <37>; 505 clocks = <&rcc 0 STM32F4_APB2_CLOCK(USART1)>; 506 status = "disabled"; 507 dmas = <&dma2 2 4 0x400 0x0>, 508 <&dma2 7 4 0x400 0x0>; 509 dma-names = "rx", "tx"; 510 }; 511 512 usart6: serial@40011400 { 513 compatible = "st,stm32-uart"; 514 reg = <0x40011400 0x400>; 515 interrupts = <71>; 516 clocks = <&rcc 0 STM32F4_APB2_CLOCK(USART6)>; 517 status = "disabled"; 518 }; 519 520 adc: adc@40012000 { 521 compatible = "st,stm32f4-adc-core"; 522 reg = <0x40012000 0x400>; 523 interrupts = <18>; 524 clocks = <&rcc 0 STM32F4_APB2_CLOCK(ADC1)>; 525 clock-names = "adc"; 526 interrupt-controller; 527 #interrupt-cells = <1>; 528 #address-cells = <1>; 529 #size-cells = <0>; 530 status = "disabled"; 531 532 adc1: adc@0 { 533 compatible = "st,stm32f4-adc"; 534 #io-channel-cells = <1>; 535 reg = <0x0>; 536 clocks = <&rcc 0 STM32F4_APB2_CLOCK(ADC1)>; 537 interrupt-parent = <&adc>; 538 interrupts = <0>; 539 dmas = <&dma2 0 0 0x400 0x0>; 540 dma-names = "rx"; 541 status = "disabled"; 542 }; 543 544 adc2: adc@100 { 545 compatible = "st,stm32f4-adc"; 546 #io-channel-cells = <1>; 547 reg = <0x100>; 548 clocks = <&rcc 0 STM32F4_APB2_CLOCK(ADC2)>; 549 interrupt-parent = <&adc>; 550 interrupts = <1>; 551 dmas = <&dma2 3 1 0x400 0x0>; 552 dma-names = "rx"; 553 status = "disabled"; 554 }; 555 556 adc3: adc@200 { 557 compatible = "st,stm32f4-adc"; 558 #io-channel-cells = <1>; 559 reg = <0x200>; 560 clocks = <&rcc 0 STM32F4_APB2_CLOCK(ADC3)>; 561 interrupt-parent = <&adc>; 562 interrupts = <2>; 563 dmas = <&dma2 1 2 0x400 0x0>; 564 dma-names = "rx"; 565 status = "disabled"; 566 }; 567 }; 568 569 sdio: sdio@40012c00 { 570 compatible = "arm,pl180", "arm,primecell"; 571 arm,primecell-periphid = <0x00880180>; 572 reg = <0x40012c00 0x400>; 573 clocks = <&rcc 0 STM32F4_APB2_CLOCK(SDIO)>; 574 clock-names = "apb_pclk"; 575 interrupts = <49>; 576 max-frequency = <48000000>; 577 status = "disabled"; 578 }; 579 580 spi1: spi@40013000 { 581 #address-cells = <1>; 582 #size-cells = <0>; 583 compatible = "st,stm32f4-spi"; 584 reg = <0x40013000 0x400>; 585 interrupts = <35>; 586 clocks = <&rcc 0 STM32F4_APB2_CLOCK(SPI1)>; 587 status = "disabled"; 588 }; 589 590 spi4: spi@40013400 { 591 #address-cells = <1>; 592 #size-cells = <0>; 593 compatible = "st,stm32f4-spi"; 594 reg = <0x40013400 0x400>; 595 interrupts = <84>; 596 clocks = <&rcc 0 STM32F4_APB2_CLOCK(SPI4)>; 597 status = "disabled"; 598 }; 599 600 syscfg: syscon@40013800 { 601 compatible = "st,stm32-syscfg", "syscon"; 602 reg = <0x40013800 0x400>; 603 }; 604 605 exti: interrupt-controller@40013c00 { 606 compatible = "st,stm32-exti"; 607 interrupt-controller; 608 #interrupt-cells = <2>; 609 reg = <0x40013C00 0x400>; 610 interrupts = <1>, <2>, <3>, <6>, <7>, <8>, <9>, <10>, <23>, <40>, <41>, <42>, <62>, <76>; 611 }; 612 613 timers9: timers@40014000 { 614 #address-cells = <1>; 615 #size-cells = <0>; 616 compatible = "st,stm32-timers"; 617 reg = <0x40014000 0x400>; 618 clocks = <&rcc 0 STM32F4_APB2_CLOCK(TIM9)>; 619 clock-names = "int"; 620 status = "disabled"; 621 622 pwm { 623 compatible = "st,stm32-pwm"; 624 #pwm-cells = <3>; 625 status = "disabled"; 626 }; 627 628 timer@8 { 629 compatible = "st,stm32-timer-trigger"; 630 reg = <8>; 631 status = "disabled"; 632 }; 633 }; 634 635 timers10: timers@40014400 { 636 #address-cells = <1>; 637 #size-cells = <0>; 638 compatible = "st,stm32-timers"; 639 reg = <0x40014400 0x400>; 640 clocks = <&rcc 0 STM32F4_APB2_CLOCK(TIM10)>; 641 clock-names = "int"; 642 status = "disabled"; 643 644 pwm { 645 compatible = "st,stm32-pwm"; 646 #pwm-cells = <3>; 647 status = "disabled"; 648 }; 649 }; 650 651 timers11: timers@40014800 { 652 #address-cells = <1>; 653 #size-cells = <0>; 654 compatible = "st,stm32-timers"; 655 reg = <0x40014800 0x400>; 656 clocks = <&rcc 0 STM32F4_APB2_CLOCK(TIM11)>; 657 clock-names = "int"; 658 status = "disabled"; 659 660 pwm { 661 compatible = "st,stm32-pwm"; 662 #pwm-cells = <3>; 663 status = "disabled"; 664 }; 665 }; 666 667 spi5: spi@40015000 { 668 #address-cells = <1>; 669 #size-cells = <0>; 670 compatible = "st,stm32f4-spi"; 671 reg = <0x40015000 0x400>; 672 interrupts = <85>; 673 clocks = <&rcc 0 STM32F4_APB2_CLOCK(SPI5)>; 674 dmas = <&dma2 3 2 0x400 0x0>, 675 <&dma2 4 2 0x400 0x0>; 676 dma-names = "rx", "tx"; 677 status = "disabled"; 678 }; 679 680 spi6: spi@40015400 { 681 #address-cells = <1>; 682 #size-cells = <0>; 683 compatible = "st,stm32f4-spi"; 684 reg = <0x40015400 0x400>; 685 interrupts = <86>; 686 clocks = <&rcc 0 STM32F4_APB2_CLOCK(SPI6)>; 687 status = "disabled"; 688 }; 689 690 pwrcfg: power-config@40007000 { 691 compatible = "st,stm32-power-config", "syscon"; 692 reg = <0x40007000 0x400>; 693 }; 694 695 ltdc: display-controller@40016800 { 696 compatible = "st,stm32-ltdc"; 697 reg = <0x40016800 0x200>; 698 interrupts = <88>, <89>; 699 resets = <&rcc STM32F4_APB2_RESET(LTDC)>; 700 clocks = <&rcc 1 CLK_LCD>; 701 clock-names = "lcd"; 702 status = "disabled"; 703 }; 704 705 crc: crc@40023000 { 706 compatible = "st,stm32f4-crc"; 707 reg = <0x40023000 0x400>; 708 clocks = <&rcc 0 STM32F4_AHB1_CLOCK(CRC)>; 709 status = "disabled"; 710 }; 711 712 rcc: rcc@40023810 { 713 #reset-cells = <1>; 714 #clock-cells = <2>; 715 compatible = "st,stm32f42xx-rcc", "st,stm32-rcc"; 716 reg = <0x40023800 0x400>; 717 clocks = <&clk_hse>, <&clk_i2s_ckin>; 718 st,syscfg = <&pwrcfg>; 719 assigned-clocks = <&rcc 1 CLK_HSE_RTC>; 720 assigned-clock-rates = <1000000>; 721 }; 722 723 dma1: dma-controller@40026000 { 724 compatible = "st,stm32-dma"; 725 reg = <0x40026000 0x400>; 726 interrupts = <11>, 727 <12>, 728 <13>, 729 <14>, 730 <15>, 731 <16>, 732 <17>, 733 <47>; 734 clocks = <&rcc 0 STM32F4_AHB1_CLOCK(DMA1)>; 735 #dma-cells = <4>; 736 }; 737 738 dma2: dma-controller@40026400 { 739 compatible = "st,stm32-dma"; 740 reg = <0x40026400 0x400>; 741 interrupts = <56>, 742 <57>, 743 <58>, 744 <59>, 745 <60>, 746 <68>, 747 <69>, 748 <70>; 749 clocks = <&rcc 0 STM32F4_AHB1_CLOCK(DMA2)>; 750 #dma-cells = <4>; 751 st,mem2mem; 752 }; 753 754 mac: ethernet@40028000 { 755 compatible = "st,stm32-dwmac", "snps,dwmac-3.50a"; 756 reg = <0x40028000 0x8000>; 757 reg-names = "stmmaceth"; 758 interrupts = <61>; 759 interrupt-names = "macirq"; 760 clock-names = "stmmaceth", "mac-clk-tx", "mac-clk-rx"; 761 clocks = <&rcc 0 STM32F4_AHB1_CLOCK(ETHMAC)>, 762 <&rcc 0 STM32F4_AHB1_CLOCK(ETHMACTX)>, 763 <&rcc 0 STM32F4_AHB1_CLOCK(ETHMACRX)>; 764 st,syscon = <&syscfg 0x4>; 765 snps,pbl = <8>; 766 snps,mixed-burst; 767 status = "disabled"; 768 }; 769 770 usbotg_hs: usb@40040000 { 771 compatible = "snps,dwc2"; 772 reg = <0x40040000 0x40000>; 773 interrupts = <77>; 774 clocks = <&rcc 0 STM32F4_AHB1_CLOCK(OTGHS)>; 775 clock-names = "otg"; 776 status = "disabled"; 777 }; 778 779 usbotg_fs: usb@50000000 { 780 compatible = "st,stm32f4x9-fsotg"; 781 reg = <0x50000000 0x40000>; 782 interrupts = <67>; 783 clocks = <&rcc 0 39>; 784 clock-names = "otg"; 785 status = "disabled"; 786 }; 787 788 dcmi: dcmi@50050000 { 789 compatible = "st,stm32-dcmi"; 790 reg = <0x50050000 0x400>; 791 interrupts = <78>; 792 resets = <&rcc STM32F4_AHB2_RESET(DCMI)>; 793 clocks = <&rcc 0 STM32F4_AHB2_CLOCK(DCMI)>; 794 clock-names = "mclk"; 795 pinctrl-names = "default"; 796 pinctrl-0 = <&dcmi_pins>; 797 dmas = <&dma2 1 1 0x414 0x3>; 798 dma-names = "tx"; 799 status = "disabled"; 800 }; 801 802 rng: rng@50060800 { 803 compatible = "st,stm32-rng"; 804 reg = <0x50060800 0x400>; 805 clocks = <&rcc 0 STM32F4_AHB2_CLOCK(RNG)>; 806 807 }; 808 }; 809}; 810 811&systick { 812 clocks = <&rcc 1 SYSTICK>; 813 status = "okay"; 814}; 815
