1 /* 2 * Copyright 2021 Advanced Micro Devices, Inc. 3 * 4 * Permission is hereby granted, free of charge, to any person obtaining a 5 * copy of this software and associated documentation files (the "Software"), 6 * to deal in the Software without restriction, including without limitation 7 * the rights to use, copy, modify, merge, publish, distribute, sublicense, 8 * and/or sell copies of the Software, and to permit persons to whom the 9 * Software is furnished to do so, subject to the following conditions: 10 * 11 * The above copyright notice and this permission notice shall be included in 12 * all copies or substantial portions of the Software. 13 * 14 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 15 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 16 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 17 * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR 18 * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, 19 * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR 20 * OTHER DEALINGS IN THE SOFTWARE. 21 * 22 */ 23 24 #ifndef SMU13_DRIVER_IF_V13_0_0_H 25 #define SMU13_DRIVER_IF_V13_0_0_H 26 27 //Increment this version if SkuTable_t or BoardTable_t change 28 #define PPTABLE_VERSION 0x26 29 30 #define NUM_GFXCLK_DPM_LEVELS 16 31 #define NUM_SOCCLK_DPM_LEVELS 8 32 #define NUM_MP0CLK_DPM_LEVELS 2 33 #define NUM_DCLK_DPM_LEVELS 8 34 #define NUM_VCLK_DPM_LEVELS 8 35 #define NUM_DISPCLK_DPM_LEVELS 8 36 #define NUM_DPPCLK_DPM_LEVELS 8 37 #define NUM_DPREFCLK_DPM_LEVELS 8 38 #define NUM_DCFCLK_DPM_LEVELS 8 39 #define NUM_DTBCLK_DPM_LEVELS 8 40 #define NUM_UCLK_DPM_LEVELS 4 41 #define NUM_LINK_LEVELS 3 42 #define NUM_FCLK_DPM_LEVELS 8 43 #define NUM_OD_FAN_MAX_POINTS 6 44 45 // Feature Control Defines 46 #define FEATURE_FW_DATA_READ_BIT 0 47 #define FEATURE_DPM_GFXCLK_BIT 1 48 #define FEATURE_DPM_GFX_POWER_OPTIMIZER_BIT 2 49 #define FEATURE_DPM_UCLK_BIT 3 50 #define FEATURE_DPM_FCLK_BIT 4 51 #define FEATURE_DPM_SOCCLK_BIT 5 52 #define FEATURE_DPM_MP0CLK_BIT 6 53 #define FEATURE_DPM_LINK_BIT 7 54 #define FEATURE_DPM_DCN_BIT 8 55 #define FEATURE_VMEMP_SCALING_BIT 9 56 #define FEATURE_VDDIO_MEM_SCALING_BIT 10 57 #define FEATURE_DS_GFXCLK_BIT 11 58 #define FEATURE_DS_SOCCLK_BIT 12 59 #define FEATURE_DS_FCLK_BIT 13 60 #define FEATURE_DS_LCLK_BIT 14 61 #define FEATURE_DS_DCFCLK_BIT 15 62 #define FEATURE_DS_UCLK_BIT 16 63 #define FEATURE_GFX_ULV_BIT 17 64 #define FEATURE_FW_DSTATE_BIT 18 65 #define FEATURE_GFXOFF_BIT 19 66 #define FEATURE_BACO_BIT 20 67 #define FEATURE_MM_DPM_BIT 21 68 #define FEATURE_SOC_MPCLK_DS_BIT 22 69 #define FEATURE_BACO_MPCLK_DS_BIT 23 70 #define FEATURE_THROTTLERS_BIT 24 71 #define FEATURE_SMARTSHIFT_BIT 25 72 #define FEATURE_GTHR_BIT 26 73 #define FEATURE_ACDC_BIT 27 74 #define FEATURE_VR0HOT_BIT 28 75 #define FEATURE_FW_CTF_BIT 29 76 #define FEATURE_FAN_CONTROL_BIT 30 77 #define FEATURE_GFX_DCS_BIT 31 78 #define FEATURE_GFX_READ_MARGIN_BIT 32 79 #define FEATURE_LED_DISPLAY_BIT 33 80 #define FEATURE_GFXCLK_SPREAD_SPECTRUM_BIT 34 81 #define FEATURE_OUT_OF_BAND_MONITOR_BIT 35 82 #define FEATURE_OPTIMIZED_VMIN_BIT 36 83 #define FEATURE_GFX_IMU_BIT 37 84 #define FEATURE_BOOT_TIME_CAL_BIT 38 85 #define FEATURE_GFX_PCC_DFLL_BIT 39 86 #define FEATURE_SOC_CG_BIT 40 87 #define FEATURE_DF_CSTATE_BIT 41 88 #define FEATURE_GFX_EDC_BIT 42 89 #define FEATURE_BOOT_POWER_OPT_BIT 43 90 #define FEATURE_CLOCK_POWER_DOWN_BYPASS_BIT 44 91 #define FEATURE_DS_VCN_BIT 45 92 #define FEATURE_BACO_CG_BIT 46 93 #define FEATURE_MEM_TEMP_READ_BIT 47 94 #define FEATURE_ATHUB_MMHUB_PG_BIT 48 95 #define FEATURE_SOC_PCC_BIT 49 96 #define FEATURE_EDC_PWRBRK_BIT 50 97 #define FEATURE_SPARE_51_BIT 51 98 #define FEATURE_SPARE_52_BIT 52 99 #define FEATURE_SPARE_53_BIT 53 100 #define FEATURE_SPARE_54_BIT 54 101 #define FEATURE_SPARE_55_BIT 55 102 #define FEATURE_SPARE_56_BIT 56 103 #define FEATURE_SPARE_57_BIT 57 104 #define FEATURE_SPARE_58_BIT 58 105 #define FEATURE_SPARE_59_BIT 59 106 #define FEATURE_SPARE_60_BIT 60 107 #define FEATURE_SPARE_61_BIT 61 108 #define FEATURE_SPARE_62_BIT 62 109 #define FEATURE_SPARE_63_BIT 63 110 #define NUM_FEATURES 64 111 112 #define ALLOWED_FEATURE_CTRL_DEFAULT 0xFFFFFFFFFFFFFFFFULL 113 #define ALLOWED_FEATURE_CTRL_SCPM ((1 << FEATURE_DPM_GFXCLK_BIT) | \ 114 (1 << FEATURE_DPM_GFX_POWER_OPTIMIZER_BIT) | \ 115 (1 << FEATURE_DPM_UCLK_BIT) | \ 116 (1 << FEATURE_DPM_FCLK_BIT) | \ 117 (1 << FEATURE_DPM_SOCCLK_BIT) | \ 118 (1 << FEATURE_DPM_MP0CLK_BIT) | \ 119 (1 << FEATURE_DPM_LINK_BIT) | \ 120 (1 << FEATURE_DPM_DCN_BIT) | \ 121 (1 << FEATURE_DS_GFXCLK_BIT) | \ 122 (1 << FEATURE_DS_SOCCLK_BIT) | \ 123 (1 << FEATURE_DS_FCLK_BIT) | \ 124 (1 << FEATURE_DS_LCLK_BIT) | \ 125 (1 << FEATURE_DS_DCFCLK_BIT) | \ 126 (1 << FEATURE_DS_UCLK_BIT)) 127 128 //For use with feature control messages 129 typedef enum { 130 FEATURE_PWR_ALL, 131 FEATURE_PWR_S5, 132 FEATURE_PWR_BACO, 133 FEATURE_PWR_SOC, 134 FEATURE_PWR_GFX, 135 FEATURE_PWR_DOMAIN_COUNT, 136 } FEATURE_PWR_DOMAIN_e; 137 138 139 // Debug Overrides Bitmask 140 #define DEBUG_OVERRIDE_DISABLE_VOLT_LINK_VCN_FCLK 0x00000001 141 #define DEBUG_OVERRIDE_DISABLE_VOLT_LINK_DCN_FCLK 0x00000002 142 #define DEBUG_OVERRIDE_DISABLE_VOLT_LINK_MP0_FCLK 0x00000004 143 #define DEBUG_OVERRIDE_DISABLE_VOLT_LINK_VCN_DCFCLK 0x00000008 144 #define DEBUG_OVERRIDE_DISABLE_FAST_FCLK_TIMER 0x00000010 145 #define DEBUG_OVERRIDE_DISABLE_VCN_PG 0x00000020 146 #define DEBUG_OVERRIDE_DISABLE_FMAX_VMAX 0x00000040 147 #define DEBUG_OVERRIDE_DISABLE_IMU_FW_CHECKS 0x00000080 148 #define DEBUG_OVERRIDE_DISABLE_D0i2_REENTRY_HSR_TIMER_CHECK 0x00000100 149 #define DEBUG_OVERRIDE_DISABLE_DFLL 0x00000200 150 #define DEBUG_OVERRIDE_ENABLE_RLC_VF_BRINGUP_MODE 0x00000400 151 #define DEBUG_OVERRIDE_DFLL_MASTER_MODE 0x00000800 152 #define DEBUG_OVERRIDE_ENABLE_PROFILING_MODE 0x00001000 153 154 // VR Mapping Bit Defines 155 #define VR_MAPPING_VR_SELECT_MASK 0x01 156 #define VR_MAPPING_VR_SELECT_SHIFT 0x00 157 158 #define VR_MAPPING_PLANE_SELECT_MASK 0x02 159 #define VR_MAPPING_PLANE_SELECT_SHIFT 0x01 160 161 // PSI Bit Defines 162 #define PSI_SEL_VR0_PLANE0_PSI0 0x01 163 #define PSI_SEL_VR0_PLANE0_PSI1 0x02 164 #define PSI_SEL_VR0_PLANE1_PSI0 0x04 165 #define PSI_SEL_VR0_PLANE1_PSI1 0x08 166 #define PSI_SEL_VR1_PLANE0_PSI0 0x10 167 #define PSI_SEL_VR1_PLANE0_PSI1 0x20 168 #define PSI_SEL_VR1_PLANE1_PSI0 0x40 169 #define PSI_SEL_VR1_PLANE1_PSI1 0x80 170 171 typedef enum { 172 SVI_PSI_0, // Full phase count (default) 173 SVI_PSI_1, // Phase count 1st level 174 SVI_PSI_2, // Phase count 2nd level 175 SVI_PSI_3, // Single phase operation + active diode emulation 176 SVI_PSI_4, // Single phase operation + passive diode emulation *optional* 177 SVI_PSI_5, // Reserved 178 SVI_PSI_6, // Power down to 0V (voltage regulation disabled) 179 SVI_PSI_7, // Automated phase shedding and diode emulation 180 } SVI_PSI_e; 181 182 // Throttler Control/Status Bits 183 #define THROTTLER_TEMP_EDGE_BIT 0 184 #define THROTTLER_TEMP_HOTSPOT_BIT 1 185 #define THROTTLER_TEMP_HOTSPOT_G_BIT 2 186 #define THROTTLER_TEMP_HOTSPOT_M_BIT 3 187 #define THROTTLER_TEMP_MEM_BIT 4 188 #define THROTTLER_TEMP_VR_GFX_BIT 5 189 #define THROTTLER_TEMP_VR_MEM0_BIT 6 190 #define THROTTLER_TEMP_VR_MEM1_BIT 7 191 #define THROTTLER_TEMP_VR_SOC_BIT 8 192 #define THROTTLER_TEMP_VR_U_BIT 9 193 #define THROTTLER_TEMP_LIQUID0_BIT 10 194 #define THROTTLER_TEMP_LIQUID1_BIT 11 195 #define THROTTLER_TEMP_PLX_BIT 12 196 #define THROTTLER_TDC_GFX_BIT 13 197 #define THROTTLER_TDC_SOC_BIT 14 198 #define THROTTLER_TDC_U_BIT 15 199 #define THROTTLER_PPT0_BIT 16 200 #define THROTTLER_PPT1_BIT 17 201 #define THROTTLER_PPT2_BIT 18 202 #define THROTTLER_PPT3_BIT 19 203 #define THROTTLER_FIT_BIT 20 204 #define THROTTLER_GFX_APCC_PLUS_BIT 21 205 #define THROTTLER_COUNT 22 206 207 // FW DState Features Control Bits 208 #define FW_DSTATE_SOC_ULV_BIT 0 209 #define FW_DSTATE_G6_HSR_BIT 1 210 #define FW_DSTATE_G6_PHY_VMEMP_OFF_BIT 2 211 #define FW_DSTATE_SMN_DS_BIT 3 212 #define FW_DSTATE_MP1_WHISPER_MODE_BIT 4 213 #define FW_DSTATE_SOC_LIV_MIN_BIT 5 214 #define FW_DSTATE_SOC_PLL_PWRDN_BIT 6 215 #define FW_DSTATE_MEM_PLL_PWRDN_BIT 7 216 #define FW_DSTATE_MALL_ALLOC_BIT 8 217 #define FW_DSTATE_MEM_PSI_BIT 9 218 #define FW_DSTATE_HSR_NON_STROBE_BIT 10 219 #define FW_DSTATE_MP0_ENTER_WFI_BIT 11 220 #define FW_DSTATE_U_ULV_BIT 12 221 #define FW_DSTATE_MALL_FLUSH_BIT 13 222 #define FW_DSTATE_SOC_PSI_BIT 14 223 #define FW_DSTATE_U_PSI_BIT 15 224 #define FW_DSTATE_UCP_DS_BIT 16 225 #define FW_DSTATE_CSRCLK_DS_BIT 17 226 #define FW_DSTATE_MMHUB_INTERLOCK_BIT 18 227 #define FW_DSTATE_D0i3_2_QUIET_FW_BIT 19 228 #define FW_DSTATE_CLDO_PRG_BIT 20 229 #define FW_DSTATE_DF_PLL_PWRDN_BIT 21 230 #define FW_DSTATE_U_LOW_PWR_MODE_EN_BIT 22 231 #define FW_DSTATE_GFX_PSI6_BIT 23 232 #define FW_DSTATE_GFX_VR_PWR_STAGE_BIT 24 233 234 //LED Display Mask & Control Bits 235 #define LED_DISPLAY_GFX_DPM_BIT 0 236 #define LED_DISPLAY_PCIE_BIT 1 237 #define LED_DISPLAY_ERROR_BIT 2 238 239 240 #define MEM_TEMP_READ_OUT_OF_BAND_BIT 0 241 #define MEM_TEMP_READ_IN_BAND_REFRESH_BIT 1 242 #define MEM_TEMP_READ_IN_BAND_DUMMY_PSTATE_BIT 2 243 244 typedef enum { 245 SMARTSHIFT_VERSION_1, 246 SMARTSHIFT_VERSION_2, 247 SMARTSHIFT_VERSION_3, 248 } SMARTSHIFT_VERSION_e; 249 250 typedef enum { 251 FOPT_CALC_AC_CALC_DC, 252 FOPT_PPTABLE_AC_CALC_DC, 253 FOPT_CALC_AC_PPTABLE_DC, 254 FOPT_PPTABLE_AC_PPTABLE_DC, 255 } FOPT_CALC_e; 256 257 typedef enum { 258 DRAM_BIT_WIDTH_DISABLED = 0, 259 DRAM_BIT_WIDTH_X_8 = 8, 260 DRAM_BIT_WIDTH_X_16 = 16, 261 DRAM_BIT_WIDTH_X_32 = 32, 262 DRAM_BIT_WIDTH_X_64 = 64, 263 DRAM_BIT_WIDTH_X_128 = 128, 264 DRAM_BIT_WIDTH_COUNT, 265 } DRAM_BIT_WIDTH_TYPE_e; 266 267 //I2C Interface 268 #define NUM_I2C_CONTROLLERS 8 269 270 #define I2C_CONTROLLER_ENABLED 1 271 #define I2C_CONTROLLER_DISABLED 0 272 273 #define MAX_SW_I2C_COMMANDS 24 274 275 typedef enum { 276 I2C_CONTROLLER_PORT_0 = 0, //CKSVII2C0 277 I2C_CONTROLLER_PORT_1 = 1, //CKSVII2C1 278 I2C_CONTROLLER_PORT_COUNT, 279 } I2cControllerPort_e; 280 281 typedef enum { 282 I2C_CONTROLLER_NAME_VR_GFX = 0, 283 I2C_CONTROLLER_NAME_VR_SOC, 284 I2C_CONTROLLER_NAME_VR_VMEMP, 285 I2C_CONTROLLER_NAME_VR_VDDIO, 286 I2C_CONTROLLER_NAME_LIQUID0, 287 I2C_CONTROLLER_NAME_LIQUID1, 288 I2C_CONTROLLER_NAME_PLX, 289 I2C_CONTROLLER_NAME_FAN_INTAKE, 290 I2C_CONTROLLER_NAME_COUNT, 291 } I2cControllerName_e; 292 293 typedef enum { 294 I2C_CONTROLLER_THROTTLER_TYPE_NONE = 0, 295 I2C_CONTROLLER_THROTTLER_VR_GFX, 296 I2C_CONTROLLER_THROTTLER_VR_SOC, 297 I2C_CONTROLLER_THROTTLER_VR_VMEMP, 298 I2C_CONTROLLER_THROTTLER_VR_VDDIO, 299 I2C_CONTROLLER_THROTTLER_LIQUID0, 300 I2C_CONTROLLER_THROTTLER_LIQUID1, 301 I2C_CONTROLLER_THROTTLER_PLX, 302 I2C_CONTROLLER_THROTTLER_FAN_INTAKE, 303 I2C_CONTROLLER_THROTTLER_INA3221, 304 I2C_CONTROLLER_THROTTLER_COUNT, 305 } I2cControllerThrottler_e; 306 307 typedef enum { 308 I2C_CONTROLLER_PROTOCOL_VR_XPDE132G5, 309 I2C_CONTROLLER_PROTOCOL_VR_IR35217, 310 I2C_CONTROLLER_PROTOCOL_TMP_MAX31875, 311 I2C_CONTROLLER_PROTOCOL_INA3221, 312 I2C_CONTROLLER_PROTOCOL_COUNT, 313 } I2cControllerProtocol_e; 314 315 typedef struct { 316 uint8_t Enabled; 317 uint8_t Speed; 318 uint8_t SlaveAddress; 319 uint8_t ControllerPort; 320 uint8_t ControllerName; 321 uint8_t ThermalThrotter; 322 uint8_t I2cProtocol; 323 uint8_t PaddingConfig; 324 } I2cControllerConfig_t; 325 326 typedef enum { 327 I2C_PORT_SVD_SCL = 0, 328 I2C_PORT_GPIO, 329 } I2cPort_e; 330 331 typedef enum { 332 I2C_SPEED_FAST_50K = 0, //50 Kbits/s 333 I2C_SPEED_FAST_100K, //100 Kbits/s 334 I2C_SPEED_FAST_400K, //400 Kbits/s 335 I2C_SPEED_FAST_PLUS_1M, //1 Mbits/s (in fast mode) 336 I2C_SPEED_HIGH_1M, //1 Mbits/s (in high speed mode) 337 I2C_SPEED_HIGH_2M, //2.3 Mbits/s 338 I2C_SPEED_COUNT, 339 } I2cSpeed_e; 340 341 typedef enum { 342 I2C_CMD_READ = 0, 343 I2C_CMD_WRITE, 344 I2C_CMD_COUNT, 345 } I2cCmdType_e; 346 347 #define CMDCONFIG_STOP_BIT 0 348 #define CMDCONFIG_RESTART_BIT 1 349 #define CMDCONFIG_READWRITE_BIT 2 //bit should be 0 for read, 1 for write 350 351 #define CMDCONFIG_STOP_MASK (1 << CMDCONFIG_STOP_BIT) 352 #define CMDCONFIG_RESTART_MASK (1 << CMDCONFIG_RESTART_BIT) 353 #define CMDCONFIG_READWRITE_MASK (1 << CMDCONFIG_READWRITE_BIT) 354 355 typedef struct { 356 uint8_t ReadWriteData; //Return data for read. Data to send for write 357 uint8_t CmdConfig; //Includes whether associated command should have a stop or restart command, and is a read or write 358 } SwI2cCmd_t; //SW I2C Command Table 359 360 typedef struct { 361 uint8_t I2CcontrollerPort; //CKSVII2C0(0) or //CKSVII2C1(1) 362 uint8_t I2CSpeed; //Use I2cSpeed_e to indicate speed to select 363 uint8_t SlaveAddress; //Slave address of device 364 uint8_t NumCmds; //Number of commands 365 366 SwI2cCmd_t SwI2cCmds[MAX_SW_I2C_COMMANDS]; 367 } SwI2cRequest_t; // SW I2C Request Table 368 369 typedef struct { 370 SwI2cRequest_t SwI2cRequest; 371 372 uint32_t Spare[8]; 373 uint32_t MmHubPadding[8]; // SMU internal use 374 } SwI2cRequestExternal_t; 375 376 typedef struct { 377 uint64_t mca_umc_status; 378 uint64_t mca_umc_addr; 379 380 uint16_t ce_count_lo_chip; 381 uint16_t ce_count_hi_chip; 382 383 uint32_t eccPadding; 384 } EccInfo_t; 385 386 typedef struct { 387 EccInfo_t EccInfo[24]; 388 } EccInfoTable_t; 389 390 //D3HOT sequences 391 typedef enum { 392 BACO_SEQUENCE, 393 MSR_SEQUENCE, 394 BAMACO_SEQUENCE, 395 ULPS_SEQUENCE, 396 D3HOT_SEQUENCE_COUNT, 397 } D3HOTSequence_e; 398 399 //This is aligned with RSMU PGFSM Register Mapping 400 typedef enum { 401 PG_DYNAMIC_MODE = 0, 402 PG_STATIC_MODE, 403 } PowerGatingMode_e; 404 405 //This is aligned with RSMU PGFSM Register Mapping 406 typedef enum { 407 PG_POWER_DOWN = 0, 408 PG_POWER_UP, 409 } PowerGatingSettings_e; 410 411 typedef struct { 412 uint32_t a; // store in IEEE float format in this variable 413 uint32_t b; // store in IEEE float format in this variable 414 uint32_t c; // store in IEEE float format in this variable 415 } QuadraticInt_t; 416 417 typedef struct { 418 uint32_t m; // store in IEEE float format in this variable 419 uint32_t b; // store in IEEE float format in this variable 420 } LinearInt_t; 421 422 typedef struct { 423 uint32_t a; // store in IEEE float format in this variable 424 uint32_t b; // store in IEEE float format in this variable 425 uint32_t c; // store in IEEE float format in this variable 426 } DroopInt_t; 427 428 typedef enum { 429 DCS_ARCH_DISABLED, 430 DCS_ARCH_FADCS, 431 DCS_ARCH_ASYNC, 432 } DCS_ARCH_e; 433 434 //Only Clks that have DPM descriptors are listed here 435 typedef enum { 436 PPCLK_GFXCLK = 0, 437 PPCLK_SOCCLK, 438 PPCLK_UCLK, 439 PPCLK_FCLK, 440 PPCLK_DCLK_0, 441 PPCLK_VCLK_0, 442 PPCLK_DCLK_1, 443 PPCLK_VCLK_1, 444 PPCLK_DISPCLK, 445 PPCLK_DPPCLK, 446 PPCLK_DPREFCLK, 447 PPCLK_DCFCLK, 448 PPCLK_DTBCLK, 449 PPCLK_COUNT, 450 } PPCLK_e; 451 452 typedef enum { 453 VOLTAGE_MODE_PPTABLE = 0, 454 VOLTAGE_MODE_FUSES, 455 VOLTAGE_MODE_COUNT, 456 } VOLTAGE_MODE_e; 457 458 459 typedef enum { 460 AVFS_VOLTAGE_GFX = 0, 461 AVFS_VOLTAGE_SOC, 462 AVFS_VOLTAGE_COUNT, 463 } AVFS_VOLTAGE_TYPE_e; 464 465 typedef enum { 466 AVFS_TEMP_COLD = 0, 467 AVFS_TEMP_HOT, 468 AVFS_TEMP_COUNT, 469 } AVFS_TEMP_e; 470 471 typedef enum { 472 AVFS_D_G, 473 AVFS_D_M_B, 474 AVFS_D_M_S, 475 AVFS_D_COUNT, 476 } AVFS_D_e; 477 478 typedef enum { 479 UCLK_DIV_BY_1 = 0, 480 UCLK_DIV_BY_2, 481 UCLK_DIV_BY_4, 482 UCLK_DIV_BY_8, 483 } UCLK_DIV_e; 484 485 typedef enum { 486 GPIO_INT_POLARITY_ACTIVE_LOW = 0, 487 GPIO_INT_POLARITY_ACTIVE_HIGH, 488 } GpioIntPolarity_e; 489 490 typedef enum { 491 PWR_CONFIG_TDP = 0, 492 PWR_CONFIG_TGP, 493 PWR_CONFIG_TCP_ESTIMATED, 494 PWR_CONFIG_TCP_MEASURED, 495 } PwrConfig_e; 496 497 typedef struct { 498 uint8_t Padding; 499 uint8_t SnapToDiscrete; // 0 - Fine grained DPM, 1 - Discrete DPM 500 uint8_t NumDiscreteLevels; // Set to 2 (Fmin, Fmax) when using fine grained DPM, otherwise set to # discrete levels used 501 uint8_t CalculateFopt; // Indication whether FW should calculate Fopt or use values below. Reference FOPT_CALC_e 502 LinearInt_t ConversionToAvfsClk; // Transfer function to AVFS Clock (GHz->GHz) 503 uint32_t Padding3[3]; 504 uint16_t Padding4; 505 uint16_t FoptimalDc; //Foptimal frequency in DC power mode. 506 uint16_t FoptimalAc; //Foptimal frequency in AC power mode. 507 uint16_t Padding2; 508 } DpmDescriptor_t; 509 510 typedef enum { 511 PPT_THROTTLER_PPT0, 512 PPT_THROTTLER_PPT1, 513 PPT_THROTTLER_PPT2, 514 PPT_THROTTLER_PPT3, 515 PPT_THROTTLER_COUNT 516 } PPT_THROTTLER_e; 517 518 typedef enum { 519 TEMP_EDGE, 520 TEMP_HOTSPOT, 521 TEMP_HOTSPOT_G, 522 TEMP_HOTSPOT_M, 523 TEMP_MEM, 524 TEMP_VR_GFX, 525 TEMP_VR_MEM0, 526 TEMP_VR_MEM1, 527 TEMP_VR_SOC, 528 TEMP_VR_U, 529 TEMP_LIQUID0, 530 TEMP_LIQUID1, 531 TEMP_PLX, 532 TEMP_COUNT, 533 } TEMP_e; 534 535 typedef enum { 536 TDC_THROTTLER_GFX, 537 TDC_THROTTLER_SOC, 538 TDC_THROTTLER_U, 539 TDC_THROTTLER_COUNT 540 } TDC_THROTTLER_e; 541 542 typedef enum { 543 SVI_PLANE_GFX, 544 SVI_PLANE_SOC, 545 SVI_PLANE_VMEMP, 546 SVI_PLANE_VDDIO_MEM, 547 SVI_PLANE_U, 548 SVI_PLANE_COUNT, 549 } SVI_PLANE_e; 550 551 typedef enum { 552 PMFW_VOLT_PLANE_GFX, 553 PMFW_VOLT_PLANE_SOC, 554 PMFW_VOLT_PLANE_COUNT 555 } PMFW_VOLT_PLANE_e; 556 557 typedef enum { 558 CUSTOMER_VARIANT_ROW, 559 CUSTOMER_VARIANT_FALCON, 560 CUSTOMER_VARIANT_COUNT, 561 } CUSTOMER_VARIANT_e; 562 563 typedef enum { 564 POWER_SOURCE_AC, 565 POWER_SOURCE_DC, 566 POWER_SOURCE_COUNT, 567 } POWER_SOURCE_e; 568 569 typedef enum { 570 MEM_VENDOR_SAMSUNG, 571 MEM_VENDOR_INFINEON, 572 MEM_VENDOR_ELPIDA, 573 MEM_VENDOR_ETRON, 574 MEM_VENDOR_NANYA, 575 MEM_VENDOR_HYNIX, 576 MEM_VENDOR_MOSEL, 577 MEM_VENDOR_WINBOND, 578 MEM_VENDOR_ESMT, 579 MEM_VENDOR_PLACEHOLDER0, 580 MEM_VENDOR_PLACEHOLDER1, 581 MEM_VENDOR_PLACEHOLDER2, 582 MEM_VENDOR_PLACEHOLDER3, 583 MEM_VENDOR_PLACEHOLDER4, 584 MEM_VENDOR_PLACEHOLDER5, 585 MEM_VENDOR_MICRON, 586 MEM_VENDOR_COUNT, 587 } MEM_VENDOR_e; 588 589 typedef enum { 590 PP_GRTAVFS_HW_CPO_CTL_ZONE0, 591 PP_GRTAVFS_HW_CPO_CTL_ZONE1, 592 PP_GRTAVFS_HW_CPO_CTL_ZONE2, 593 PP_GRTAVFS_HW_CPO_CTL_ZONE3, 594 PP_GRTAVFS_HW_CPO_CTL_ZONE4, 595 PP_GRTAVFS_HW_CPO_EN_0_31_ZONE0, 596 PP_GRTAVFS_HW_CPO_EN_32_63_ZONE0, 597 PP_GRTAVFS_HW_CPO_EN_0_31_ZONE1, 598 PP_GRTAVFS_HW_CPO_EN_32_63_ZONE1, 599 PP_GRTAVFS_HW_CPO_EN_0_31_ZONE2, 600 PP_GRTAVFS_HW_CPO_EN_32_63_ZONE2, 601 PP_GRTAVFS_HW_CPO_EN_0_31_ZONE3, 602 PP_GRTAVFS_HW_CPO_EN_32_63_ZONE3, 603 PP_GRTAVFS_HW_CPO_EN_0_31_ZONE4, 604 PP_GRTAVFS_HW_CPO_EN_32_63_ZONE4, 605 PP_GRTAVFS_HW_ZONE0_VF, 606 PP_GRTAVFS_HW_ZONE1_VF1, 607 PP_GRTAVFS_HW_ZONE2_VF2, 608 PP_GRTAVFS_HW_ZONE3_VF3, 609 PP_GRTAVFS_HW_VOLTAGE_GB, 610 PP_GRTAVFS_HW_CPOSCALINGCTRL_ZONE0, 611 PP_GRTAVFS_HW_CPOSCALINGCTRL_ZONE1, 612 PP_GRTAVFS_HW_CPOSCALINGCTRL_ZONE2, 613 PP_GRTAVFS_HW_CPOSCALINGCTRL_ZONE3, 614 PP_GRTAVFS_HW_CPOSCALINGCTRL_ZONE4, 615 PP_GRTAVFS_HW_RESERVED_0, 616 PP_GRTAVFS_HW_RESERVED_1, 617 PP_GRTAVFS_HW_RESERVED_2, 618 PP_GRTAVFS_HW_RESERVED_3, 619 PP_GRTAVFS_HW_RESERVED_4, 620 PP_GRTAVFS_HW_RESERVED_5, 621 PP_GRTAVFS_HW_RESERVED_6, 622 PP_GRTAVFS_HW_FUSE_COUNT, 623 } PP_GRTAVFS_HW_FUSE_e; 624 625 typedef enum { 626 PP_GRTAVFS_FW_COMMON_PPVMIN_Z1_HOT_T0, 627 PP_GRTAVFS_FW_COMMON_PPVMIN_Z1_COLD_T0, 628 PP_GRTAVFS_FW_COMMON_PPVMIN_Z2_HOT_T0, 629 PP_GRTAVFS_FW_COMMON_PPVMIN_Z2_COLD_T0, 630 PP_GRTAVFS_FW_COMMON_PPVMIN_Z3_HOT_T0, 631 PP_GRTAVFS_FW_COMMON_PPVMIN_Z3_COLD_T0, 632 PP_GRTAVFS_FW_COMMON_PPVMIN_Z4_HOT_T0, 633 PP_GRTAVFS_FW_COMMON_PPVMIN_Z4_COLD_T0, 634 PP_GRTAVFS_FW_COMMON_SRAM_RM_Z0, 635 PP_GRTAVFS_FW_COMMON_SRAM_RM_Z1, 636 PP_GRTAVFS_FW_COMMON_SRAM_RM_Z2, 637 PP_GRTAVFS_FW_COMMON_SRAM_RM_Z3, 638 PP_GRTAVFS_FW_COMMON_SRAM_RM_Z4, 639 PP_GRTAVFS_FW_COMMON_FUSE_COUNT, 640 } PP_GRTAVFS_FW_COMMON_FUSE_e; 641 642 typedef enum { 643 PP_GRTAVFS_FW_SEP_FUSE_GB1_PWL_VOLTAGE_NEG_1, 644 PP_GRTAVFS_FW_SEP_FUSE_GB1_PWL_VOLTAGE_0, 645 PP_GRTAVFS_FW_SEP_FUSE_GB1_PWL_VOLTAGE_1, 646 PP_GRTAVFS_FW_SEP_FUSE_GB1_PWL_VOLTAGE_2, 647 PP_GRTAVFS_FW_SEP_FUSE_GB1_PWL_VOLTAGE_3, 648 PP_GRTAVFS_FW_SEP_FUSE_GB1_PWL_VOLTAGE_4, 649 PP_GRTAVFS_FW_SEP_FUSE_GB2_PWL_VOLTAGE_NEG_1, 650 PP_GRTAVFS_FW_SEP_FUSE_GB2_PWL_VOLTAGE_0, 651 PP_GRTAVFS_FW_SEP_FUSE_GB2_PWL_VOLTAGE_1, 652 PP_GRTAVFS_FW_SEP_FUSE_GB2_PWL_VOLTAGE_2, 653 PP_GRTAVFS_FW_SEP_FUSE_GB2_PWL_VOLTAGE_3, 654 PP_GRTAVFS_FW_SEP_FUSE_GB2_PWL_VOLTAGE_4, 655 PP_GRTAVFS_FW_SEP_FUSE_VF_NEG_1_FREQUENCY, 656 PP_GRTAVFS_FW_SEP_FUSE_VF4_FREQUENCY, 657 PP_GRTAVFS_FW_SEP_FUSE_FREQUENCY_TO_COUNT_SCALER_0, 658 PP_GRTAVFS_FW_SEP_FUSE_FREQUENCY_TO_COUNT_SCALER_1, 659 PP_GRTAVFS_FW_SEP_FUSE_FREQUENCY_TO_COUNT_SCALER_2, 660 PP_GRTAVFS_FW_SEP_FUSE_FREQUENCY_TO_COUNT_SCALER_3, 661 PP_GRTAVFS_FW_SEP_FUSE_FREQUENCY_TO_COUNT_SCALER_4, 662 PP_GRTAVFS_FW_SEP_FUSE_COUNT, 663 } PP_GRTAVFS_FW_SEP_FUSE_e; 664 665 #define PP_NUM_RTAVFS_PWL_ZONES 5 666 667 668 669 // VBIOS or PPLIB configures telemetry slope and offset. Only slope expected to be set for SVI3 670 // Slope Q1.7, Offset Q1.2 671 typedef struct { 672 int8_t Offset; // in Amps 673 uint8_t Padding; 674 uint16_t MaxCurrent; // in Amps 675 } SviTelemetryScale_t; 676 677 #define PP_NUM_OD_VF_CURVE_POINTS PP_NUM_RTAVFS_PWL_ZONES + 1 678 679 typedef enum { 680 FAN_MODE_AUTO = 0, 681 FAN_MODE_MANUAL_LINEAR, 682 } FanMode_e; 683 684 typedef struct { 685 uint32_t FeatureCtrlMask; 686 687 //Voltage control 688 int16_t VoltageOffsetPerZoneBoundary[PP_NUM_OD_VF_CURVE_POINTS]; 689 uint16_t VddGfxVmax; // in mV 690 691 uint8_t IdlePwrSavingFeaturesCtrl; 692 uint8_t RuntimePwrSavingFeaturesCtrl; 693 694 //Frequency changes 695 int16_t GfxclkFmin; // MHz 696 int16_t GfxclkFmax; // MHz 697 uint16_t UclkFmin; // MHz 698 uint16_t UclkFmax; // MHz 699 700 //PPT 701 int16_t Ppt; // % 702 int16_t Tdc; 703 704 //Fan control 705 uint8_t FanLinearPwmPoints[NUM_OD_FAN_MAX_POINTS]; 706 uint8_t FanLinearTempPoints[NUM_OD_FAN_MAX_POINTS]; 707 uint16_t FanMinimumPwm; 708 uint16_t AcousticTargetRpmThreshold; 709 uint16_t AcousticLimitRpmThreshold; 710 uint16_t FanTargetTemperature; // Degree Celcius 711 uint8_t FanZeroRpmEnable; 712 uint8_t FanZeroRpmStopTemp; 713 uint8_t FanMode; 714 uint8_t MaxOpTemp; 715 716 uint32_t Spare[13]; 717 uint32_t MmHubPadding[8]; // SMU internal use. Adding here instead of external as a workaround 718 } OverDriveTable_t; 719 720 typedef struct { 721 OverDriveTable_t OverDriveTable; 722 723 } OverDriveTableExternal_t; 724 725 typedef struct { 726 uint32_t FeatureCtrlMask; 727 728 int16_t VoltageOffsetPerZoneBoundary; 729 uint16_t VddGfxVmax; // in mV 730 731 uint8_t IdlePwrSavingFeaturesCtrl; 732 uint8_t RuntimePwrSavingFeaturesCtrl; 733 734 int16_t GfxclkFmin; // MHz 735 int16_t GfxclkFmax; // MHz 736 uint16_t UclkFmin; // MHz 737 uint16_t UclkFmax; // MHz 738 739 //PPT 740 int16_t Ppt; // % 741 int16_t Tdc; 742 743 uint8_t FanLinearPwmPoints; 744 uint8_t FanLinearTempPoints; 745 uint16_t FanMinimumPwm; 746 uint16_t AcousticTargetRpmThreshold; 747 uint16_t AcousticLimitRpmThreshold; 748 uint16_t FanTargetTemperature; // Degree Celcius 749 uint8_t FanZeroRpmEnable; 750 uint8_t FanZeroRpmStopTemp; 751 uint8_t FanMode; 752 uint8_t MaxOpTemp; 753 754 uint32_t Spare[13]; 755 756 } OverDriveLimits_t; 757 758 759 typedef enum { 760 BOARD_GPIO_SMUIO_0, 761 BOARD_GPIO_SMUIO_1, 762 BOARD_GPIO_SMUIO_2, 763 BOARD_GPIO_SMUIO_3, 764 BOARD_GPIO_SMUIO_4, 765 BOARD_GPIO_SMUIO_5, 766 BOARD_GPIO_SMUIO_6, 767 BOARD_GPIO_SMUIO_7, 768 BOARD_GPIO_SMUIO_8, 769 BOARD_GPIO_SMUIO_9, 770 BOARD_GPIO_SMUIO_10, 771 BOARD_GPIO_SMUIO_11, 772 BOARD_GPIO_SMUIO_12, 773 BOARD_GPIO_SMUIO_13, 774 BOARD_GPIO_SMUIO_14, 775 BOARD_GPIO_SMUIO_15, 776 BOARD_GPIO_SMUIO_16, 777 BOARD_GPIO_SMUIO_17, 778 BOARD_GPIO_SMUIO_18, 779 BOARD_GPIO_SMUIO_19, 780 BOARD_GPIO_SMUIO_20, 781 BOARD_GPIO_SMUIO_21, 782 BOARD_GPIO_SMUIO_22, 783 BOARD_GPIO_SMUIO_23, 784 BOARD_GPIO_SMUIO_24, 785 BOARD_GPIO_SMUIO_25, 786 BOARD_GPIO_SMUIO_26, 787 BOARD_GPIO_SMUIO_27, 788 BOARD_GPIO_SMUIO_28, 789 BOARD_GPIO_SMUIO_29, 790 BOARD_GPIO_SMUIO_30, 791 BOARD_GPIO_SMUIO_31, 792 MAX_BOARD_GPIO_SMUIO_NUM, 793 BOARD_GPIO_DC_GEN_A, 794 BOARD_GPIO_DC_GEN_B, 795 BOARD_GPIO_DC_GEN_C, 796 BOARD_GPIO_DC_GEN_D, 797 BOARD_GPIO_DC_GEN_E, 798 BOARD_GPIO_DC_GEN_F, 799 BOARD_GPIO_DC_GEN_G, 800 BOARD_GPIO_DC_GENLK_CLK, 801 BOARD_GPIO_DC_GENLK_VSYNC, 802 BOARD_GPIO_DC_SWAPLOCK_A, 803 BOARD_GPIO_DC_SWAPLOCK_B, 804 } BOARD_GPIO_TYPE_e; 805 806 #define INVALID_BOARD_GPIO 0xFF 807 808 809 typedef struct { 810 //PLL 0 811 uint16_t InitGfxclk_bypass; 812 uint16_t InitSocclk; 813 uint16_t InitMp0clk; 814 uint16_t InitMpioclk; 815 uint16_t InitSmnclk; 816 uint16_t InitUcpclk; 817 uint16_t InitCsrclk; 818 //PLL 1 819 820 uint16_t InitDprefclk; 821 uint16_t InitDcfclk; 822 uint16_t InitDtbclk; 823 //PLL 2 824 uint16_t InitDclk; //assume same DCLK/VCLK for both instances 825 uint16_t InitVclk; 826 // PLL 3 827 uint16_t InitUsbdfsclk; 828 uint16_t InitMp1clk; 829 uint16_t InitLclk; 830 uint16_t InitBaco400clk_bypass; 831 uint16_t InitBaco1200clk_bypass; 832 uint16_t InitBaco700clk_bypass; 833 // PLL 4 834 uint16_t InitFclk; 835 // PLL 5 836 uint16_t InitGfxclk_clkb; 837 838 //PLL 6 839 uint8_t InitUclkDPMState; // =0,1,2,3, frequency from FreqTableUclk 840 841 uint8_t Padding[3]; 842 843 uint32_t InitVcoFreqPll0; 844 uint32_t InitVcoFreqPll1; 845 uint32_t InitVcoFreqPll2; 846 uint32_t InitVcoFreqPll3; 847 uint32_t InitVcoFreqPll4; 848 uint32_t InitVcoFreqPll5; 849 uint32_t InitVcoFreqPll6; 850 851 //encoding will change depending on SVI2/SVI3 852 uint16_t InitGfx; // In mV(Q2) , should be 0? 853 uint16_t InitSoc; // In mV(Q2) 854 uint16_t InitU; // In Mv(Q2) 855 856 uint16_t Padding2; 857 858 uint32_t Spare[8]; 859 860 } BootValues_t; 861 862 863 typedef struct { 864 uint16_t Power[PPT_THROTTLER_COUNT][POWER_SOURCE_COUNT]; // Watts 865 uint16_t Tdc[TDC_THROTTLER_COUNT]; // Amps 866 867 uint16_t Temperature[TEMP_COUNT]; // Celsius 868 869 uint8_t PwmLimitMin; 870 uint8_t PwmLimitMax; 871 uint8_t FanTargetTemperature; 872 uint8_t Spare1[1]; 873 874 uint16_t AcousticTargetRpmThresholdMin; 875 uint16_t AcousticTargetRpmThresholdMax; 876 877 uint16_t AcousticLimitRpmThresholdMin; 878 uint16_t AcousticLimitRpmThresholdMax; 879 880 uint16_t PccLimitMin; 881 uint16_t PccLimitMax; 882 883 uint16_t FanStopTempMin; 884 uint16_t FanStopTempMax; 885 uint16_t FanStartTempMin; 886 uint16_t FanStartTempMax; 887 888 uint16_t PowerMinPpt0[POWER_SOURCE_COUNT]; 889 uint32_t Spare[11]; 890 891 } MsgLimits_t; 892 893 typedef struct { 894 uint16_t BaseClockAc; 895 uint16_t GameClockAc; 896 uint16_t BoostClockAc; 897 uint16_t BaseClockDc; 898 uint16_t GameClockDc; 899 uint16_t BoostClockDc; 900 901 uint32_t Reserved[4]; 902 } DriverReportedClocks_t; 903 904 typedef struct { 905 uint8_t DcBtcEnabled; 906 uint8_t Padding[3]; 907 908 uint16_t DcTol; // mV Q2 909 uint16_t DcBtcGb; // mV Q2 910 911 uint16_t DcBtcMin; // mV Q2 912 uint16_t DcBtcMax; // mV Q2 913 914 LinearInt_t DcBtcGbScalar; 915 916 } AvfsDcBtcParams_t; 917 918 typedef struct { 919 uint16_t AvfsTemp[AVFS_TEMP_COUNT]; //in degrees C 920 uint16_t VftFMin; // in MHz 921 uint16_t VInversion; // in mV Q2 922 QuadraticInt_t qVft[AVFS_TEMP_COUNT]; 923 QuadraticInt_t qAvfsGb; 924 QuadraticInt_t qAvfsGb2; 925 } AvfsFuseOverride_t; 926 927 typedef struct { 928 // SECTION: Version 929 930 uint32_t Version; // should be unique to each SKU(i.e if any value changes in below structure then this value must be different) 931 932 // SECTION: Feature Control 933 uint32_t FeaturesToRun[NUM_FEATURES / 32]; // Features that PMFW will attempt to enable. Use FEATURE_*_BIT as mapping 934 935 // SECTION: Miscellaneous Configuration 936 uint8_t TotalPowerConfig; // Determines how PMFW calculates the power. Use defines from PwrConfig_e 937 uint8_t CustomerVariant; //To specify if this PPTable is intended for a particular customer. Use defines from CUSTOMER_VARIANT_e 938 uint8_t MemoryTemperatureTypeMask; // Bit mapping indicating which methods of memory temperature reading are enabled. Use defines from MEM_TEMP_*BIT 939 uint8_t SmartShiftVersion; // Determine what SmartShift feature version is supported Use defines from SMARTSHIFT_VERSION_e 940 941 // SECTION: Infrastructure Limits 942 uint16_t SocketPowerLimitAc[PPT_THROTTLER_COUNT]; // In Watts. Power limit that PMFW attempts to control to in AC mode. Multiple limits supported 943 uint16_t SocketPowerLimitDc[PPT_THROTTLER_COUNT]; // In Watts. Power limit that PMFW attempts to control to in DC mode. Multiple limits supported 944 945 uint16_t SocketPowerLimitSmartShift2; // In Watts. Power limit used SmartShift 946 947 //if set to 1, SocketPowerLimitAc and SocketPowerLimitDc will be interpreted as legacy programs(i.e absolute power). If 0, all except index 0 will be scalars 948 //relative index 0 949 uint8_t EnableLegacyPptLimit; 950 uint8_t UseInputTelemetry; //applicable to SVI3 only and only to be set if VRs support 951 uint8_t SmartShiftMinReportedPptinDcs; //minimum possible active power consumption for this SKU. Used for SmartShift power reporting 952 953 uint8_t PaddingPpt[1]; 954 955 uint16_t VrTdcLimit[TDC_THROTTLER_COUNT]; // In Amperes. Current limit associated with VR regulator maximum temperature 956 957 uint16_t PlatformTdcLimit[TDC_THROTTLER_COUNT]; // In Amperes. Current limit associated with platform maximum temperature per VR current rail 958 959 uint16_t TemperatureLimit[TEMP_COUNT]; // In degrees Celsius. Temperature limit associated with each input 960 961 uint16_t HwCtfTempLimit; // In degrees Celsius. Temperature above which HW will trigger CTF. Consumed by VBIOS only 962 963 uint16_t PaddingInfra; 964 965 // Per year normalized Vmax state failure rates (sum of the two domains divided by life time in years) 966 uint32_t FitControllerFailureRateLimit; //in IEEE float 967 //Expected GFX Duty Cycle at Vmax. 968 uint32_t FitControllerGfxDutyCycle; // in IEEE float 969 //Expected SOC Duty Cycle at Vmax. 970 uint32_t FitControllerSocDutyCycle; // in IEEE float 971 972 //This offset will be deducted from the controller output to before it goes through the SOC Vset limiter block. 973 uint32_t FitControllerSocOffset; //in IEEE float 974 975 uint32_t GfxApccPlusResidencyLimit; // Percentage value. Used by APCC+ controller to control PCC residency to some value 976 977 // SECTION: Throttler settings 978 uint32_t ThrottlerControlMask; // See THROTTLER_*_BIT for mapping 979 980 // SECTION: FW DSTATE Settings 981 uint32_t FwDStateMask; // See FW_DSTATE_*_BIT for mapping 982 983 // SECTION: Voltage Control Parameters 984 uint16_t UlvVoltageOffset[PMFW_VOLT_PLANE_COUNT]; // In mV(Q2). ULV offset used in either GFX_ULV or SOC_ULV(part of FW_DSTATE) 985 986 uint16_t UlvVoltageOffsetU; // In mV(Q2). ULV offset used in either U_ULV(part of FW_DSTATE) 987 uint16_t DeepUlvVoltageOffsetSoc; // In mV(Q2) Long Idle Vmin (deep ULV), for VDD_SOC as part of FW_DSTATE 988 989 // Voltage Limits 990 uint16_t DefaultMaxVoltage[PMFW_VOLT_PLANE_COUNT]; // In mV(Q2) Maximum voltage without FIT controller enabled 991 uint16_t BoostMaxVoltage[PMFW_VOLT_PLANE_COUNT]; // In mV(Q2) Maximum voltage with FIT controller enabled 992 993 //Vmin Optimizations 994 int16_t VminTempHystersis[PMFW_VOLT_PLANE_COUNT]; // Celsius Temperature hysteresis for switching between low/high temperature values for Vmin 995 int16_t VminTempThreshold[PMFW_VOLT_PLANE_COUNT]; // Celsius Temperature threshold for switching between low/high temperature values for Vmin 996 uint16_t Vmin_Hot_T0[PMFW_VOLT_PLANE_COUNT]; //In mV(Q2) Initial (pre-aging) Vset to be used at hot. 997 uint16_t Vmin_Cold_T0[PMFW_VOLT_PLANE_COUNT]; //In mV(Q2) Initial (pre-aging) Vset to be used at cold. 998 uint16_t Vmin_Hot_Eol[PMFW_VOLT_PLANE_COUNT]; //In mV(Q2) End-of-life Vset to be used at hot. 999 uint16_t Vmin_Cold_Eol[PMFW_VOLT_PLANE_COUNT]; //In mV(Q2) End-of-life Vset to be used at cold. 1000 uint16_t Vmin_Aging_Offset[PMFW_VOLT_PLANE_COUNT]; //In mV(Q2) Worst-case aging margin 1001 uint16_t Spare_Vmin_Plat_Offset_Hot[PMFW_VOLT_PLANE_COUNT]; //In mV(Q2) Platform offset apply to T0 Hot 1002 uint16_t Spare_Vmin_Plat_Offset_Cold[PMFW_VOLT_PLANE_COUNT]; //In mV(Q2) Platform offset apply to T0 Cold 1003 1004 //This is a fixed/minimum VMIN aging degradation offset which is applied at T0. This reflects the minimum amount of aging already accounted for. 1005 uint16_t VcBtcFixedVminAgingOffset[PMFW_VOLT_PLANE_COUNT]; 1006 //Linear offset or GB term to account for mis-correlation between PSM and Vmin shift trends across parts. 1007 uint16_t VcBtcVmin2PsmDegrationGb[PMFW_VOLT_PLANE_COUNT]; 1008 //Scalar coefficient of the PSM aging degradation function 1009 uint32_t VcBtcPsmA[PMFW_VOLT_PLANE_COUNT]; // A_PSM 1010 //Exponential coefficient of the PSM aging degradation function 1011 uint32_t VcBtcPsmB[PMFW_VOLT_PLANE_COUNT]; // B_PSM 1012 //Scalar coefficient of the VMIN aging degradation function. Specified as worst case between hot and cold. 1013 uint32_t VcBtcVminA[PMFW_VOLT_PLANE_COUNT]; // A_VMIN 1014 //Exponential coefficient of the VMIN aging degradation function. Specified as worst case between hot and cold. 1015 uint32_t VcBtcVminB[PMFW_VOLT_PLANE_COUNT]; // B_VMIN 1016 1017 uint8_t PerPartVminEnabled[PMFW_VOLT_PLANE_COUNT]; 1018 uint8_t VcBtcEnabled[PMFW_VOLT_PLANE_COUNT]; 1019 1020 uint16_t SocketPowerLimitAcTau[PPT_THROTTLER_COUNT]; // Time constant of LPF in ms 1021 uint16_t SocketPowerLimitDcTau[PPT_THROTTLER_COUNT]; // Time constant of LPF in ms 1022 1023 QuadraticInt_t Vmin_droop; 1024 uint32_t SpareVmin[9]; 1025 1026 1027 //SECTION: DPM Configuration 1 1028 DpmDescriptor_t DpmDescriptor[PPCLK_COUNT]; 1029 1030 uint16_t FreqTableGfx [NUM_GFXCLK_DPM_LEVELS ]; // In MHz 1031 uint16_t FreqTableVclk [NUM_VCLK_DPM_LEVELS ]; // In MHz 1032 uint16_t FreqTableDclk [NUM_DCLK_DPM_LEVELS ]; // In MHz 1033 uint16_t FreqTableSocclk [NUM_SOCCLK_DPM_LEVELS ]; // In MHz 1034 uint16_t FreqTableUclk [NUM_UCLK_DPM_LEVELS ]; // In MHz 1035 uint16_t FreqTableDispclk [NUM_DISPCLK_DPM_LEVELS ]; // In MHz 1036 uint16_t FreqTableDppClk [NUM_DPPCLK_DPM_LEVELS ]; // In MHz 1037 uint16_t FreqTableDprefclk [NUM_DPREFCLK_DPM_LEVELS]; // In MHz 1038 uint16_t FreqTableDcfclk [NUM_DCFCLK_DPM_LEVELS ]; // In MHz 1039 uint16_t FreqTableDtbclk [NUM_DTBCLK_DPM_LEVELS ]; // In MHz 1040 uint16_t FreqTableFclk [NUM_FCLK_DPM_LEVELS ]; // In MHz 1041 1042 uint32_t DcModeMaxFreq [PPCLK_COUNT ]; // In MHz 1043 1044 // SECTION: DPM Configuration 2 1045 uint16_t Mp0clkFreq [NUM_MP0CLK_DPM_LEVELS]; // in MHz 1046 uint16_t Mp0DpmVoltage [NUM_MP0CLK_DPM_LEVELS]; // mV(Q2) 1047 1048 uint8_t GfxclkSpare[2]; 1049 uint16_t GfxclkFreqCap; 1050 1051 //GFX Idle Power Settings 1052 uint16_t GfxclkFgfxoffEntry; // in Mhz 1053 uint16_t GfxclkFgfxoffExitImu; // in Mhz 1054 uint16_t GfxclkFgfxoffExitRlc; // in Mhz 1055 uint16_t GfxclkThrottleClock; //Used primarily in DCS 1056 uint8_t EnableGfxPowerStagesGpio; //Genlk_vsync GPIO flag used to control gfx power stages 1057 uint8_t GfxIdlePadding; 1058 1059 uint8_t SmsRepairWRCKClkDivEn; 1060 uint8_t SmsRepairWRCKClkDivVal; 1061 uint8_t GfxOffEntryEarlyMGCGEn; 1062 uint8_t GfxOffEntryForceCGCGEn; 1063 uint8_t GfxOffEntryForceCGCGDelayEn; 1064 uint8_t GfxOffEntryForceCGCGDelayVal; // in microseconds 1065 1066 uint16_t GfxclkFreqGfxUlv; // in MHz 1067 uint8_t GfxIdlePadding2[2]; 1068 1069 uint32_t GfxOffEntryHysteresis; 1070 uint32_t GfxoffSpare[15]; 1071 1072 // GFX GPO 1073 uint32_t DfllBtcMasterScalerM; 1074 int32_t DfllBtcMasterScalerB; 1075 uint32_t DfllBtcSlaveScalerM; 1076 int32_t DfllBtcSlaveScalerB; 1077 1078 uint32_t DfllPccAsWaitCtrl; //GDFLL_AS_WAIT_CTRL_PCC register value to be passed to RLC msg 1079 uint32_t DfllPccAsStepCtrl; //GDFLL_AS_STEP_CTRL_PCC register value to be passed to RLC msg 1080 1081 uint32_t DfllL2FrequencyBoostM; //Unitless (float) 1082 uint32_t DfllL2FrequencyBoostB; //In MHz (integer) 1083 uint32_t GfxGpoSpare[8]; 1084 1085 // GFX DCS 1086 1087 uint16_t DcsGfxOffVoltage; //Voltage in mV(Q2) applied to VDDGFX when entering DCS GFXOFF phase 1088 uint16_t PaddingDcs; 1089 1090 uint16_t DcsMinGfxOffTime; //Minimum amount of time PMFW shuts GFX OFF as part of GFX DCS phase 1091 uint16_t DcsMaxGfxOffTime; //Maximum amount of time PMFW can shut GFX OFF as part of GFX DCS phase at a stretch. 1092 1093 uint32_t DcsMinCreditAccum; //Min amount of positive credit accumulation before waking GFX up as part of DCS. 1094 1095 uint16_t DcsExitHysteresis; //The min amount of time power credit accumulator should have a value > 0 before SMU exits the DCS throttling phase. 1096 uint16_t DcsTimeout; //This is the amount of time SMU FW waits for RLC to put GFX into GFXOFF before reverting to the fallback mechanism of throttling GFXCLK to Fmin. 1097 1098 1099 uint32_t DcsSpare[16]; 1100 1101 // UCLK section 1102 uint8_t UseStrobeModeOptimizations; //Set to indicate that FW should use strobe mode optimizations 1103 uint8_t PaddingMem[3]; 1104 1105 uint8_t UclkDpmPstates [NUM_UCLK_DPM_LEVELS]; // 4 DPM states, 0-P0, 1-P1, 2-P2, 3-P3. 1106 uint8_t FreqTableUclkDiv [NUM_UCLK_DPM_LEVELS ]; // 0:Div-1, 1:Div-1/2, 2:Div-1/4, 3:Div-1/8 1107 1108 uint16_t MemVmempVoltage [NUM_UCLK_DPM_LEVELS]; // mV(Q2) 1109 uint16_t MemVddioVoltage [NUM_UCLK_DPM_LEVELS]; // mV(Q2) 1110 1111 //FCLK Section 1112 1113 uint8_t FclkDpmUPstates[NUM_FCLK_DPM_LEVELS]; // U P-state ID associated with each FCLK DPM state. 1114 uint16_t FclkDpmVddU[NUM_FCLK_DPM_LEVELS]; // mV(Q2) Vset U voltage associated with each FCLK DPM state. 1115 uint16_t FclkDpmUSpeed[NUM_FCLK_DPM_LEVELS]; //U speed associated with each FCLK DPM state 1116 uint16_t FclkDpmDisallowPstateFreq; //Frequency which FW will target when indicated that display config cannot support P-state. Set to 0 use FW calculated value 1117 uint16_t PaddingFclk; 1118 1119 // Link DPM Settings 1120 uint8_t PcieGenSpeed[NUM_LINK_LEVELS]; ///< 0:PciE-gen1 1:PciE-gen2 2:PciE-gen3 3:PciE-gen4 1121 uint8_t PcieLaneCount[NUM_LINK_LEVELS]; ///< 1=x1, 2=x2, 3=x4, 4=x8, 5=x12, 6=x16 1122 uint16_t LclkFreq[NUM_LINK_LEVELS]; 1123 1124 // SECTION: Fan Control 1125 uint16_t FanStopTemp[TEMP_COUNT]; //Celsius 1126 uint16_t FanStartTemp[TEMP_COUNT]; //Celsius 1127 1128 uint16_t FanGain[TEMP_COUNT]; 1129 uint16_t FanGainPadding; 1130 1131 uint16_t FanPwmMin; 1132 uint16_t AcousticTargetRpmThreshold; 1133 uint16_t AcousticLimitRpmThreshold; 1134 uint16_t FanMaximumRpm; 1135 uint16_t MGpuAcousticLimitRpmThreshold; 1136 uint16_t FanTargetGfxclk; 1137 uint32_t TempInputSelectMask; 1138 uint8_t FanZeroRpmEnable; 1139 uint8_t FanTachEdgePerRev; 1140 uint16_t FanTargetTemperature[TEMP_COUNT]; 1141 1142 // The following are AFC override parameters. Leave at 0 to use FW defaults. 1143 int16_t FuzzyFan_ErrorSetDelta; 1144 int16_t FuzzyFan_ErrorRateSetDelta; 1145 int16_t FuzzyFan_PwmSetDelta; 1146 uint16_t FuzzyFan_Reserved; 1147 1148 uint16_t FwCtfLimit[TEMP_COUNT]; 1149 1150 uint16_t IntakeTempEnableRPM; 1151 int16_t IntakeTempOffsetTemp; 1152 uint16_t IntakeTempReleaseTemp; 1153 uint16_t IntakeTempHighIntakeAcousticLimit; 1154 uint16_t IntakeTempAcouticLimitReleaseRate; 1155 1156 int16_t FanAbnormalTempLimitOffset; 1157 uint16_t FanStalledTriggerRpm; 1158 uint16_t FanAbnormalTriggerRpmCoeff; 1159 uint16_t FanAbnormalDetectionEnable; 1160 1161 uint8_t FanIntakeSensorSupport; 1162 uint8_t FanIntakePadding[3]; 1163 uint32_t FanSpare[13]; 1164 1165 // SECTION: VDD_GFX AVFS 1166 1167 uint8_t OverrideGfxAvfsFuses; 1168 uint8_t GfxAvfsPadding[3]; 1169 1170 uint32_t L2HwRtAvfsFuses[PP_GRTAVFS_HW_FUSE_COUNT]; //see fusedoc for encoding 1171 uint32_t SeHwRtAvfsFuses[PP_GRTAVFS_HW_FUSE_COUNT]; 1172 1173 uint32_t CommonRtAvfs[PP_GRTAVFS_FW_COMMON_FUSE_COUNT]; 1174 1175 uint32_t L2FwRtAvfsFuses[PP_GRTAVFS_FW_SEP_FUSE_COUNT]; 1176 uint32_t SeFwRtAvfsFuses[PP_GRTAVFS_FW_SEP_FUSE_COUNT]; 1177 1178 uint32_t Droop_PWL_F[PP_NUM_RTAVFS_PWL_ZONES]; 1179 uint32_t Droop_PWL_a[PP_NUM_RTAVFS_PWL_ZONES]; 1180 uint32_t Droop_PWL_b[PP_NUM_RTAVFS_PWL_ZONES]; 1181 uint32_t Droop_PWL_c[PP_NUM_RTAVFS_PWL_ZONES]; 1182 1183 uint32_t Static_PWL_Offset[PP_NUM_RTAVFS_PWL_ZONES]; 1184 1185 uint32_t dGbV_dT_vmin; 1186 uint32_t dGbV_dT_vmax; 1187 1188 //Unused: PMFW-9370 1189 uint32_t V2F_vmin_range_low; 1190 uint32_t V2F_vmin_range_high; 1191 uint32_t V2F_vmax_range_low; 1192 uint32_t V2F_vmax_range_high; 1193 1194 AvfsDcBtcParams_t DcBtcGfxParams; 1195 1196 uint32_t GfxAvfsSpare[32]; 1197 1198 //SECTION: VDD_SOC AVFS 1199 1200 uint8_t OverrideSocAvfsFuses; 1201 uint8_t MinSocAvfsRevision; 1202 uint8_t SocAvfsPadding[2]; 1203 1204 AvfsFuseOverride_t SocAvfsFuseOverride[AVFS_D_COUNT]; 1205 1206 DroopInt_t dBtcGbSoc[AVFS_D_COUNT]; // GHz->V BtcGb 1207 1208 LinearInt_t qAgingGb[AVFS_D_COUNT]; // GHz->V 1209 1210 QuadraticInt_t qStaticVoltageOffset[AVFS_D_COUNT]; // GHz->V 1211 1212 AvfsDcBtcParams_t DcBtcSocParams[AVFS_D_COUNT]; 1213 1214 uint32_t SocAvfsSpare[32]; 1215 1216 //SECTION: Boot clock and voltage values 1217 BootValues_t BootValues; 1218 1219 //SECTION: Driver Reported Clocks 1220 DriverReportedClocks_t DriverReportedClocks; 1221 1222 //SECTION: Message Limits 1223 MsgLimits_t MsgLimits; 1224 1225 //SECTION: OverDrive Limits 1226 OverDriveLimits_t OverDriveLimitsMin; 1227 OverDriveLimits_t OverDriveLimitsBasicMax; 1228 uint32_t reserved[22]; 1229 1230 // SECTION: Advanced Options 1231 uint32_t DebugOverrides; 1232 1233 // Section: Total Board Power idle vs active coefficients 1234 uint8_t TotalBoardPowerSupport; 1235 uint8_t TotalBoardPowerPadding[3]; 1236 1237 int16_t TotalIdleBoardPowerM; 1238 int16_t TotalIdleBoardPowerB; 1239 int16_t TotalBoardPowerM; 1240 int16_t TotalBoardPowerB; 1241 1242 //PMFW-11158 1243 QuadraticInt_t qFeffCoeffGameClock[POWER_SOURCE_COUNT]; 1244 QuadraticInt_t qFeffCoeffBaseClock[POWER_SOURCE_COUNT]; 1245 QuadraticInt_t qFeffCoeffBoostClock[POWER_SOURCE_COUNT]; 1246 1247 // SECTION: Sku Reserved 1248 uint32_t Spare[43]; 1249 1250 // Padding for MMHUB - do not modify this 1251 uint32_t MmHubPadding[8]; 1252 1253 } SkuTable_t; 1254 1255 typedef struct { 1256 // SECTION: Version 1257 uint32_t Version; //should be unique to each board type 1258 1259 1260 // SECTION: I2C Control 1261 I2cControllerConfig_t I2cControllers[NUM_I2C_CONTROLLERS]; 1262 1263 // SECTION: SVI2 Board Parameters 1264 uint8_t VddGfxVrMapping; // Use VR_MAPPING* bitfields 1265 uint8_t VddSocVrMapping; // Use VR_MAPPING* bitfields 1266 uint8_t VddMem0VrMapping; // Use VR_MAPPING* bitfields 1267 uint8_t VddMem1VrMapping; // Use VR_MAPPING* bitfields 1268 1269 uint8_t GfxUlvPhaseSheddingMask; // set this to 1 to set PSI0/1 to 1 in ULV mode 1270 uint8_t SocUlvPhaseSheddingMask; // set this to 1 to set PSI0/1 to 1 in ULV mode 1271 uint8_t VmempUlvPhaseSheddingMask; // set this to 1 to set PSI0/1 to 1 in ULV mode 1272 uint8_t VddioUlvPhaseSheddingMask; // set this to 1 to set PSI0/1 to 1 in ULV mode 1273 1274 //SECTION SVI3 Board Parameters 1275 uint8_t SlaveAddrMapping[SVI_PLANE_COUNT]; 1276 uint8_t VrPsiSupport[SVI_PLANE_COUNT]; 1277 1278 uint8_t PaddingPsi[SVI_PLANE_COUNT]; 1279 uint8_t EnablePsi6[SVI_PLANE_COUNT]; // only applicable in SVI3 1280 1281 // SECTION: Voltage Regulator Settings 1282 SviTelemetryScale_t SviTelemetryScale[SVI_PLANE_COUNT]; 1283 uint32_t VoltageTelemetryRatio[SVI_PLANE_COUNT]; // This is used for VDDIO Svi2 Div Ratio workaround. It has 16 fractional bits (Q16.16) 1284 1285 uint8_t DownSlewRateVr[SVI_PLANE_COUNT]; 1286 1287 // SECTION: GPIO Settings 1288 1289 uint8_t LedOffGpio; 1290 uint8_t FanOffGpio; 1291 uint8_t GfxVrPowerStageOffGpio; 1292 1293 uint8_t AcDcGpio; // GPIO pin configured for AC/DC switching 1294 uint8_t AcDcPolarity; // GPIO polarity for AC/DC switching 1295 uint8_t VR0HotGpio; // GPIO pin configured for VR0 HOT event 1296 uint8_t VR0HotPolarity; // GPIO polarity for VR0 HOT event 1297 1298 uint8_t GthrGpio; // GPIO pin configured for GTHR Event 1299 uint8_t GthrPolarity; // replace GPIO polarity for GTHR 1300 1301 // LED Display Settings 1302 uint8_t LedPin0; // GPIO number for LedPin[0] 1303 uint8_t LedPin1; // GPIO number for LedPin[1] 1304 uint8_t LedPin2; // GPIO number for LedPin[2] 1305 uint8_t LedEnableMask; 1306 1307 uint8_t LedPcie; // GPIO number for PCIE results 1308 uint8_t LedError; // GPIO number for Error Cases 1309 1310 // SECTION: Clock Spread Spectrum 1311 1312 // UCLK Spread Spectrum 1313 uint8_t UclkTrainingModeSpreadPercent; 1314 uint8_t UclkSpreadPadding; 1315 uint16_t UclkSpreadFreq; // kHz 1316 1317 // UCLK Spread Spectrum 1318 uint8_t UclkSpreadPercent[MEM_VENDOR_COUNT]; 1319 1320 // FCLK Spread Spectrum 1321 uint8_t FclkSpreadPadding; 1322 uint8_t FclkSpreadPercent; // Q4.4 1323 uint16_t FclkSpreadFreq; // kHz 1324 1325 // Section: Memory Config 1326 uint8_t DramWidth; // Width of interface to the channel for each DRAM module. See DRAM_BIT_WIDTH_TYPE_e 1327 uint8_t PaddingMem1[7]; 1328 1329 // SECTION: UMC feature flags 1330 uint8_t HsrEnabled; 1331 uint8_t VddqOffEnabled; 1332 uint8_t PaddingUmcFlags[2]; 1333 1334 uint32_t PostVoltageSetBacoDelay; // in microseconds. Amount of time FW will wait after power good is established or PSI0 command is issued 1335 uint32_t BacoEntryDelay; // in milliseconds. Amount of time FW will wait to trigger BACO entry after receiving entry notification from OS 1336 1337 uint8_t FuseWritePowerMuxPresent; 1338 uint8_t FuseWritePadding[3]; 1339 1340 // SECTION: Board Reserved 1341 uint32_t BoardSpare[63]; 1342 1343 // SECTION: Structure Padding 1344 1345 // Padding for MMHUB - do not modify this 1346 uint32_t MmHubPadding[8]; 1347 } BoardTable_t; 1348 1349 typedef struct { 1350 SkuTable_t SkuTable; 1351 BoardTable_t BoardTable; 1352 } PPTable_t; 1353 1354 typedef struct { 1355 // Time constant parameters for clock averages in ms 1356 uint16_t GfxclkAverageLpfTau; 1357 uint16_t FclkAverageLpfTau; 1358 uint16_t UclkAverageLpfTau; 1359 uint16_t GfxActivityLpfTau; 1360 uint16_t UclkActivityLpfTau; 1361 uint16_t SocketPowerLpfTau; 1362 uint16_t VcnClkAverageLpfTau; 1363 uint16_t VcnUsageAverageLpfTau; 1364 } DriverSmuConfig_t; 1365 1366 typedef struct { 1367 DriverSmuConfig_t DriverSmuConfig; 1368 1369 uint32_t Spare[8]; 1370 // Padding - ignore 1371 uint32_t MmHubPadding[8]; // SMU internal use 1372 } DriverSmuConfigExternal_t; 1373 1374 1375 typedef struct { 1376 1377 uint16_t FreqTableGfx [NUM_GFXCLK_DPM_LEVELS ]; // In MHz 1378 uint16_t FreqTableVclk [NUM_VCLK_DPM_LEVELS ]; // In MHz 1379 uint16_t FreqTableDclk [NUM_DCLK_DPM_LEVELS ]; // In MHz 1380 uint16_t FreqTableSocclk [NUM_SOCCLK_DPM_LEVELS ]; // In MHz 1381 uint16_t FreqTableUclk [NUM_UCLK_DPM_LEVELS ]; // In MHz 1382 uint16_t FreqTableDispclk [NUM_DISPCLK_DPM_LEVELS ]; // In MHz 1383 uint16_t FreqTableDppClk [NUM_DPPCLK_DPM_LEVELS ]; // In MHz 1384 uint16_t FreqTableDprefclk [NUM_DPREFCLK_DPM_LEVELS]; // In MHz 1385 uint16_t FreqTableDcfclk [NUM_DCFCLK_DPM_LEVELS ]; // In MHz 1386 uint16_t FreqTableDtbclk [NUM_DTBCLK_DPM_LEVELS ]; // In MHz 1387 uint16_t FreqTableFclk [NUM_FCLK_DPM_LEVELS ]; // In MHz 1388 1389 uint16_t DcModeMaxFreq [PPCLK_COUNT ]; // In MHz 1390 1391 uint16_t Padding; 1392 1393 uint32_t Spare[32]; 1394 1395 // Padding - ignore 1396 uint32_t MmHubPadding[8]; // SMU internal use 1397 1398 } DriverInfoTable_t; 1399 1400 typedef struct { 1401 uint32_t CurrClock[PPCLK_COUNT]; 1402 1403 uint16_t AverageGfxclkFrequencyTarget; 1404 uint16_t AverageGfxclkFrequencyPreDs; 1405 uint16_t AverageGfxclkFrequencyPostDs; 1406 uint16_t AverageFclkFrequencyPreDs; 1407 uint16_t AverageFclkFrequencyPostDs; 1408 uint16_t AverageMemclkFrequencyPreDs ; // this is scaled to actual memory clock 1409 uint16_t AverageMemclkFrequencyPostDs ; // this is scaled to actual memory clock 1410 uint16_t AverageVclk0Frequency ; 1411 uint16_t AverageDclk0Frequency ; 1412 uint16_t AverageVclk1Frequency ; 1413 uint16_t AverageDclk1Frequency ; 1414 uint16_t PCIeBusy; 1415 uint16_t dGPU_W_MAX; 1416 uint16_t padding; 1417 1418 uint32_t MetricsCounter; 1419 1420 uint16_t AvgVoltage[SVI_PLANE_COUNT]; 1421 uint16_t AvgCurrent[SVI_PLANE_COUNT]; 1422 1423 uint16_t AverageGfxActivity ; 1424 uint16_t AverageUclkActivity ; 1425 uint16_t Vcn0ActivityPercentage ; 1426 uint16_t Vcn1ActivityPercentage ; 1427 1428 uint32_t EnergyAccumulator; 1429 uint16_t AverageSocketPower; 1430 uint16_t AverageTotalBoardPower; 1431 1432 uint16_t AvgTemperature[TEMP_COUNT]; 1433 uint16_t AvgTemperatureFanIntake; 1434 1435 uint8_t PcieRate ; 1436 uint8_t PcieWidth ; 1437 1438 uint8_t AvgFanPwm; 1439 uint8_t Padding[1]; 1440 uint16_t AvgFanRpm; 1441 1442 1443 uint8_t ThrottlingPercentage[THROTTLER_COUNT]; 1444 1445 //metrics for D3hot entry/exit and driver ARM msgs 1446 uint32_t D3HotEntryCountPerMode[D3HOT_SEQUENCE_COUNT]; 1447 uint32_t D3HotExitCountPerMode[D3HOT_SEQUENCE_COUNT]; 1448 uint32_t ArmMsgReceivedCountPerMode[D3HOT_SEQUENCE_COUNT]; 1449 1450 uint16_t ApuSTAPMSmartShiftLimit; 1451 uint16_t ApuSTAPMLimit; 1452 uint16_t AvgApuSocketPower; 1453 1454 uint16_t AverageUclkActivity_MAX; 1455 1456 uint32_t PublicSerialNumberLower; 1457 uint32_t PublicSerialNumberUpper; 1458 1459 } SmuMetrics_t; 1460 1461 typedef struct { 1462 SmuMetrics_t SmuMetrics; 1463 uint32_t Spare[30]; 1464 1465 // Padding - ignore 1466 uint32_t MmHubPadding[8]; // SMU internal use 1467 } SmuMetricsExternal_t; 1468 1469 typedef struct { 1470 uint8_t WmSetting; 1471 uint8_t Flags; 1472 uint8_t Padding[2]; 1473 1474 } WatermarkRowGeneric_t; 1475 1476 #define NUM_WM_RANGES 4 1477 1478 typedef enum { 1479 WATERMARKS_CLOCK_RANGE = 0, 1480 WATERMARKS_DUMMY_PSTATE, 1481 WATERMARKS_MALL, 1482 WATERMARKS_COUNT, 1483 } WATERMARKS_FLAGS_e; 1484 1485 typedef struct { 1486 // Watermarks 1487 WatermarkRowGeneric_t WatermarkRow[NUM_WM_RANGES]; 1488 } Watermarks_t; 1489 1490 typedef struct { 1491 Watermarks_t Watermarks; 1492 uint32_t Spare[16]; 1493 1494 uint32_t MmHubPadding[8]; // SMU internal use 1495 } WatermarksExternal_t; 1496 1497 typedef struct { 1498 uint16_t avgPsmCount[214]; 1499 uint16_t minPsmCount[214]; 1500 float avgPsmVoltage[214]; 1501 float minPsmVoltage[214]; 1502 } AvfsDebugTable_t; 1503 1504 typedef struct { 1505 AvfsDebugTable_t AvfsDebugTable; 1506 1507 uint32_t MmHubPadding[8]; // SMU internal use 1508 } AvfsDebugTableExternal_t; 1509 1510 1511 typedef struct { 1512 uint8_t Gfx_ActiveHystLimit; 1513 uint8_t Gfx_IdleHystLimit; 1514 uint8_t Gfx_FPS; 1515 uint8_t Gfx_MinActiveFreqType; 1516 uint8_t Gfx_BoosterFreqType; 1517 uint8_t PaddingGfx; 1518 uint16_t Gfx_MinActiveFreq; // MHz 1519 uint16_t Gfx_BoosterFreq; // MHz 1520 uint16_t Gfx_PD_Data_time_constant; // Time constant of PD controller in ms 1521 uint32_t Gfx_PD_Data_limit_a; // Q16 1522 uint32_t Gfx_PD_Data_limit_b; // Q16 1523 uint32_t Gfx_PD_Data_limit_c; // Q16 1524 uint32_t Gfx_PD_Data_error_coeff; // Q16 1525 uint32_t Gfx_PD_Data_error_rate_coeff; // Q16 1526 1527 uint8_t Fclk_ActiveHystLimit; 1528 uint8_t Fclk_IdleHystLimit; 1529 uint8_t Fclk_FPS; 1530 uint8_t Fclk_MinActiveFreqType; 1531 uint8_t Fclk_BoosterFreqType; 1532 uint8_t PaddingFclk; 1533 uint16_t Fclk_MinActiveFreq; // MHz 1534 uint16_t Fclk_BoosterFreq; // MHz 1535 uint16_t Fclk_PD_Data_time_constant; // Time constant of PD controller in ms 1536 uint32_t Fclk_PD_Data_limit_a; // Q16 1537 uint32_t Fclk_PD_Data_limit_b; // Q16 1538 uint32_t Fclk_PD_Data_limit_c; // Q16 1539 uint32_t Fclk_PD_Data_error_coeff; // Q16 1540 uint32_t Fclk_PD_Data_error_rate_coeff; // Q16 1541 1542 uint32_t Mem_UpThreshold_Limit[NUM_UCLK_DPM_LEVELS]; // Q16 1543 uint8_t Mem_UpHystLimit[NUM_UCLK_DPM_LEVELS]; 1544 uint8_t Mem_DownHystLimit[NUM_UCLK_DPM_LEVELS]; 1545 uint16_t Mem_Fps; 1546 uint8_t padding[2]; 1547 1548 } DpmActivityMonitorCoeffInt_t; 1549 1550 1551 typedef struct { 1552 DpmActivityMonitorCoeffInt_t DpmActivityMonitorCoeffInt; 1553 uint32_t MmHubPadding[8]; // SMU internal use 1554 } DpmActivityMonitorCoeffIntExternal_t; 1555 1556 1557 1558 // Workload bits 1559 #define WORKLOAD_PPLIB_DEFAULT_BIT 0 1560 #define WORKLOAD_PPLIB_FULL_SCREEN_3D_BIT 1 1561 #define WORKLOAD_PPLIB_POWER_SAVING_BIT 2 1562 #define WORKLOAD_PPLIB_VIDEO_BIT 3 1563 #define WORKLOAD_PPLIB_VR_BIT 4 1564 #define WORKLOAD_PPLIB_COMPUTE_BIT 5 1565 #define WORKLOAD_PPLIB_CUSTOM_BIT 6 1566 #define WORKLOAD_PPLIB_WINDOW_3D_BIT 7 1567 #define WORKLOAD_PPLIB_COUNT 8 1568 1569 1570 // These defines are used with the following messages: 1571 // SMC_MSG_TransferTableDram2Smu 1572 // SMC_MSG_TransferTableSmu2Dram 1573 1574 // Table transfer status 1575 #define TABLE_TRANSFER_OK 0x0 1576 #define TABLE_TRANSFER_FAILED 0xFF 1577 #define TABLE_TRANSFER_PENDING 0xAB 1578 1579 // Table types 1580 #define TABLE_PPTABLE 0 1581 #define TABLE_COMBO_PPTABLE 1 1582 #define TABLE_WATERMARKS 2 1583 #define TABLE_AVFS_PSM_DEBUG 3 1584 #define TABLE_PMSTATUSLOG 4 1585 #define TABLE_SMU_METRICS 5 1586 #define TABLE_DRIVER_SMU_CONFIG 6 1587 #define TABLE_ACTIVITY_MONITOR_COEFF 7 1588 #define TABLE_OVERDRIVE 8 1589 #define TABLE_I2C_COMMANDS 9 1590 #define TABLE_DRIVER_INFO 10 1591 #define TABLE_ECCINFO 11 1592 #define TABLE_COUNT 12 1593 1594 //IH Interupt ID 1595 #define IH_INTERRUPT_ID_TO_DRIVER 0xFE 1596 #define IH_INTERRUPT_CONTEXT_ID_BACO 0x2 1597 #define IH_INTERRUPT_CONTEXT_ID_AC 0x3 1598 #define IH_INTERRUPT_CONTEXT_ID_DC 0x4 1599 #define IH_INTERRUPT_CONTEXT_ID_AUDIO_D0 0x5 1600 #define IH_INTERRUPT_CONTEXT_ID_AUDIO_D3 0x6 1601 #define IH_INTERRUPT_CONTEXT_ID_THERMAL_THROTTLING 0x7 1602 #define IH_INTERRUPT_CONTEXT_ID_FAN_ABNORMAL 0x8 1603 #define IH_INTERRUPT_CONTEXT_ID_FAN_RECOVERY 0x9 1604 1605 #endif 1606
