1 #define RCS_ID "$Id: scc.c,v 1.75 1998/11/04 15:15:01 jreuter Exp jreuter $"
2
3 #define VERSION "3.0"
4
5 /*
6 * Please use z8530drv-utils-3.0 with this version.
7 * ------------------
8 *
9 * You can find a subset of the documentation in
10 * Documentation/networking/device_drivers/hamradio/z8530drv.rst.
11 */
12
13 /*
14 ********************************************************************
15 * SCC.C - Linux driver for Z8530 based HDLC cards for AX.25 *
16 ********************************************************************
17
18
19 ********************************************************************
20
21 Copyright (c) 1993, 2000 Joerg Reuter DL1BKE
22
23 portions (c) 1993 Guido ten Dolle PE1NNZ
24
25 ********************************************************************
26
27 The driver and the programs in the archive are UNDER CONSTRUCTION.
28 The code is likely to fail, and so your kernel could --- even
29 a whole network.
30
31 This driver is intended for Amateur Radio use. If you are running it
32 for commercial purposes, please drop me a note. I am nosy...
33
34 ...BUT:
35
36 ! You m u s t recognize the appropriate legislations of your country !
37 ! before you connect a radio to the SCC board and start to transmit or !
38 ! receive. The GPL allows you to use the d r i v e r, NOT the RADIO! !
39
40 For non-Amateur-Radio use please note that you might need a special
41 allowance/licence from the designer of the SCC Board and/or the
42 MODEM.
43
44 This program is free software; you can redistribute it and/or modify
45 it under the terms of the (modified) GNU General Public License
46 delivered with the Linux kernel source.
47
48 This program is distributed in the hope that it will be useful,
49 but WITHOUT ANY WARRANTY; without even the implied warranty of
50 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
51 GNU General Public License for more details.
52
53 You should find a copy of the GNU General Public License in
54 /usr/src/linux/COPYING;
55
56 ********************************************************************
57
58
59 Incomplete history of z8530drv:
60 -------------------------------
61
62 1994-09-13 started to write the driver, rescued most of my own
63 code (and Hans Alblas' memory buffer pool concept) from
64 an earlier project "sccdrv" which was initiated by
65 Guido ten Dolle. Not much of the old driver survived,
66 though. The first version I put my hands on was sccdrv1.3
67 from August 1993. The memory buffer pool concept
68 appeared in an unauthorized sccdrv version (1.5) from
69 August 1994.
70
71 1995-01-31 changed copyright notice to GPL without limitations.
72
73 .
74 . <SNIP>
75 .
76
77 1996-10-05 New semester, new driver...
78
79 * KISS TNC emulator removed (TTY driver)
80 * Source moved to drivers/net/
81 * Includes Z8530 defines from drivers/net/z8530.h
82 * Uses sk_buffer memory management
83 * Reduced overhead of /proc/net/z8530drv output
84 * Streamlined quite a lot things
85 * Invents brand new bugs... ;-)
86
87 The move to version number 3.0 reflects theses changes.
88 You can use 'kissbridge' if you need a KISS TNC emulator.
89
90 1996-12-13 Fixed for Linux networking changes. (G4KLX)
91 1997-01-08 Fixed the remaining problems.
92 1997-04-02 Hopefully fixed the problems with the new *_timer()
93 routines, added calibration code.
94 1997-10-12 Made SCC_DELAY a CONFIG option, added CONFIG_SCC_TRXECHO
95 1998-01-29 Small fix to avoid lock-up on initialization
96 1998-09-29 Fixed the "grouping" bugs, tx_inhibit works again,
97 using dev->tx_queue_len now instead of MAXQUEUE now.
98 1998-10-21 Postponed the spinlock changes, would need a lot of
99 testing I currently don't have the time to. Softdcd doesn't
100 work.
101 1998-11-04 Softdcd does not work correctly in DPLL mode, in fact it
102 never did. The DPLL locks on noise, the SYNC unit sees
103 flags that aren't... Restarting the DPLL does not help
104 either, it resynchronizes too slow and the first received
105 frame gets lost.
106 2000-02-13 Fixed for new network driver interface changes, still
107 does TX timeouts itself since it uses its own queue
108 scheme.
109
110 Thanks to all who contributed to this driver with ideas and bug
111 reports!
112
113 NB -- if you find errors, change something, please let me know
114 first before you distribute it... And please don't touch
115 the version number. Just replace my callsign in
116 "v3.0.dl1bke" with your own. Just to avoid confusion...
117
118 If you want to add your modification to the linux distribution
119 please (!) contact me first.
120
121 New versions of the driver will be announced on the linux-hams
122 mailing list on vger.kernel.org. To subscribe send an e-mail
123 to majordomo@vger.kernel.org with the following line in
124 the body of the mail:
125
126 subscribe linux-hams
127
128 The content of the "Subject" field will be ignored.
129
130 vy 73,
131 Joerg Reuter ampr-net: dl1bke@db0pra.ampr.org
132 AX-25 : DL1BKE @ DB0ABH.#BAY.DEU.EU
133 Internet: jreuter@yaina.de
134 www : http://yaina.de/jreuter
135 */
136
137 /* ----------------------------------------------------------------------- */
138
139 #undef SCC_LDELAY /* slow it even a bit more down */
140 #undef SCC_DONT_CHECK /* don't look if the SCCs you specified are available */
141
142 #define SCC_MAXCHIPS 4 /* number of max. supported chips */
143 #define SCC_BUFSIZE 384 /* must not exceed 4096 */
144 #undef SCC_DEBUG
145
146 #define SCC_DEFAULT_CLOCK 4915200
147 /* default pclock if nothing is specified */
148
149 /* ----------------------------------------------------------------------- */
150
151 #include <linux/compat.h>
152 #include <linux/module.h>
153 #include <linux/errno.h>
154 #include <linux/signal.h>
155 #include <linux/timer.h>
156 #include <linux/interrupt.h>
157 #include <linux/ioport.h>
158 #include <linux/string.h>
159 #include <linux/in.h>
160 #include <linux/fcntl.h>
161 #include <linux/ptrace.h>
162 #include <linux/delay.h>
163 #include <linux/skbuff.h>
164 #include <linux/netdevice.h>
165 #include <linux/rtnetlink.h>
166 #include <linux/if_ether.h>
167 #include <linux/if_arp.h>
168 #include <linux/socket.h>
169 #include <linux/init.h>
170 #include <linux/scc.h>
171 #include <linux/ctype.h>
172 #include <linux/kernel.h>
173 #include <linux/proc_fs.h>
174 #include <linux/seq_file.h>
175 #include <linux/bitops.h>
176
177 #include <net/net_namespace.h>
178 #include <net/ax25.h>
179
180 #include <asm/irq.h>
181 #include <asm/io.h>
182 #include <linux/uaccess.h>
183
184 #include "z8530.h"
185
186 static const char banner[] __initconst = KERN_INFO \
187 "AX.25: Z8530 SCC driver version "VERSION".dl1bke\n";
188
189 static void t_dwait(struct timer_list *t);
190 static void t_txdelay(struct timer_list *t);
191 static void t_tail(struct timer_list *t);
192 static void t_busy(struct timer_list *);
193 static void t_maxkeyup(struct timer_list *);
194 static void t_idle(struct timer_list *t);
195 static void scc_tx_done(struct scc_channel *);
196 static void scc_start_tx_timer(struct scc_channel *,
197 void (*)(struct timer_list *), unsigned long);
198 static void scc_start_maxkeyup(struct scc_channel *);
199 static void scc_start_defer(struct scc_channel *);
200
201 static void z8530_init(void);
202
203 static void init_channel(struct scc_channel *scc);
204 static void scc_key_trx (struct scc_channel *scc, char tx);
205 static void scc_init_timer(struct scc_channel *scc);
206
207 static int scc_net_alloc(const char *name, struct scc_channel *scc);
208 static void scc_net_setup(struct net_device *dev);
209 static int scc_net_open(struct net_device *dev);
210 static int scc_net_close(struct net_device *dev);
211 static void scc_net_rx(struct scc_channel *scc, struct sk_buff *skb);
212 static netdev_tx_t scc_net_tx(struct sk_buff *skb,
213 struct net_device *dev);
214 static int scc_net_siocdevprivate(struct net_device *dev, struct ifreq *ifr,
215 void __user *data, int cmd);
216 static int scc_net_set_mac_address(struct net_device *dev, void *addr);
217 static struct net_device_stats * scc_net_get_stats(struct net_device *dev);
218
219 static unsigned char SCC_DriverName[] = "scc";
220
221 static struct irqflags { unsigned char used : 1; } Ivec[NR_IRQS];
222
223 static struct scc_channel SCC_Info[2 * SCC_MAXCHIPS]; /* information per channel */
224
225 static struct scc_ctrl {
226 io_port chan_A;
227 io_port chan_B;
228 int irq;
229 } SCC_ctrl[SCC_MAXCHIPS+1];
230
231 static unsigned char Driver_Initialized;
232 static int Nchips;
233 static io_port Vector_Latch;
234
235
236 /* ******************************************************************** */
237 /* * Port Access Functions * */
238 /* ******************************************************************** */
239
240 /* These provide interrupt save 2-step access to the Z8530 registers */
241
242 static DEFINE_SPINLOCK(iolock); /* Guards paired accesses */
243
InReg(io_port port,unsigned char reg)244 static inline unsigned char InReg(io_port port, unsigned char reg)
245 {
246 unsigned long flags;
247 unsigned char r;
248
249 spin_lock_irqsave(&iolock, flags);
250 #ifdef SCC_LDELAY
251 Outb(port, reg);
252 udelay(SCC_LDELAY);
253 r=Inb(port);
254 udelay(SCC_LDELAY);
255 #else
256 Outb(port, reg);
257 r=Inb(port);
258 #endif
259 spin_unlock_irqrestore(&iolock, flags);
260 return r;
261 }
262
OutReg(io_port port,unsigned char reg,unsigned char val)263 static inline void OutReg(io_port port, unsigned char reg, unsigned char val)
264 {
265 unsigned long flags;
266
267 spin_lock_irqsave(&iolock, flags);
268 #ifdef SCC_LDELAY
269 Outb(port, reg); udelay(SCC_LDELAY);
270 Outb(port, val); udelay(SCC_LDELAY);
271 #else
272 Outb(port, reg);
273 Outb(port, val);
274 #endif
275 spin_unlock_irqrestore(&iolock, flags);
276 }
277
wr(struct scc_channel * scc,unsigned char reg,unsigned char val)278 static inline void wr(struct scc_channel *scc, unsigned char reg,
279 unsigned char val)
280 {
281 OutReg(scc->ctrl, reg, (scc->wreg[reg] = val));
282 }
283
or(struct scc_channel * scc,unsigned char reg,unsigned char val)284 static inline void or(struct scc_channel *scc, unsigned char reg, unsigned char val)
285 {
286 OutReg(scc->ctrl, reg, (scc->wreg[reg] |= val));
287 }
288
cl(struct scc_channel * scc,unsigned char reg,unsigned char val)289 static inline void cl(struct scc_channel *scc, unsigned char reg, unsigned char val)
290 {
291 OutReg(scc->ctrl, reg, (scc->wreg[reg] &= ~val));
292 }
293
294 /* ******************************************************************** */
295 /* * Some useful macros * */
296 /* ******************************************************************** */
297
scc_discard_buffers(struct scc_channel * scc)298 static inline void scc_discard_buffers(struct scc_channel *scc)
299 {
300 unsigned long flags;
301
302 spin_lock_irqsave(&scc->lock, flags);
303 if (scc->tx_buff != NULL)
304 {
305 dev_kfree_skb_irq(scc->tx_buff);
306 scc->tx_buff = NULL;
307 }
308
309 while (!skb_queue_empty(&scc->tx_queue))
310 dev_kfree_skb_irq(skb_dequeue(&scc->tx_queue));
311
312 spin_unlock_irqrestore(&scc->lock, flags);
313 }
314
315
316
317 /* ******************************************************************** */
318 /* * Interrupt Service Routines * */
319 /* ******************************************************************** */
320
321
322 /* ----> subroutines for the interrupt handlers <---- */
323
scc_notify(struct scc_channel * scc,int event)324 static inline void scc_notify(struct scc_channel *scc, int event)
325 {
326 struct sk_buff *skb;
327 char *bp;
328
329 if (scc->kiss.fulldup != KISS_DUPLEX_OPTIMA)
330 return;
331
332 skb = dev_alloc_skb(2);
333 if (skb != NULL)
334 {
335 bp = skb_put(skb, 2);
336 *bp++ = PARAM_HWEVENT;
337 *bp++ = event;
338 scc_net_rx(scc, skb);
339 } else
340 scc->stat.nospace++;
341 }
342
flush_rx_FIFO(struct scc_channel * scc)343 static inline void flush_rx_FIFO(struct scc_channel *scc)
344 {
345 int k;
346
347 for (k=0; k<3; k++)
348 Inb(scc->data);
349
350 if(scc->rx_buff != NULL) /* did we receive something? */
351 {
352 scc->stat.rxerrs++; /* then count it as an error */
353 dev_kfree_skb_irq(scc->rx_buff);
354 scc->rx_buff = NULL;
355 }
356 }
357
start_hunt(struct scc_channel * scc)358 static void start_hunt(struct scc_channel *scc)
359 {
360 if ((scc->modem.clocksrc != CLK_EXTERNAL))
361 OutReg(scc->ctrl,R14,SEARCH|scc->wreg[R14]); /* DPLL: enter search mode */
362 or(scc,R3,ENT_HM|RxENABLE); /* enable the receiver, hunt mode */
363 }
364
365 /* ----> four different interrupt handlers for Tx, Rx, changing of */
366 /* DCD/CTS and Rx/Tx errors */
367
368 /* Transmitter interrupt handler */
scc_txint(struct scc_channel * scc)369 static inline void scc_txint(struct scc_channel *scc)
370 {
371 struct sk_buff *skb;
372
373 scc->stat.txints++;
374 skb = scc->tx_buff;
375
376 /* send first octet */
377
378 if (skb == NULL)
379 {
380 skb = skb_dequeue(&scc->tx_queue);
381 scc->tx_buff = skb;
382 netif_wake_queue(scc->dev);
383
384 if (skb == NULL)
385 {
386 scc_tx_done(scc);
387 Outb(scc->ctrl, RES_Tx_P);
388 return;
389 }
390
391 if (skb->len == 0) /* Paranoia... */
392 {
393 dev_kfree_skb_irq(skb);
394 scc->tx_buff = NULL;
395 scc_tx_done(scc);
396 Outb(scc->ctrl, RES_Tx_P);
397 return;
398 }
399
400 scc->stat.tx_state = TXS_ACTIVE;
401
402 OutReg(scc->ctrl, R0, RES_Tx_CRC);
403 /* reset CRC generator */
404 or(scc,R10,ABUNDER); /* re-install underrun protection */
405 Outb(scc->data,*skb->data); /* send byte */
406 skb_pull(skb, 1);
407
408 if (!scc->enhanced) /* reset EOM latch */
409 Outb(scc->ctrl,RES_EOM_L);
410 return;
411 }
412
413 /* End Of Frame... */
414
415 if (skb->len == 0)
416 {
417 Outb(scc->ctrl, RES_Tx_P); /* reset pending int */
418 cl(scc, R10, ABUNDER); /* send CRC */
419 dev_kfree_skb_irq(skb);
420 scc->tx_buff = NULL;
421 scc->stat.tx_state = TXS_NEWFRAME; /* next frame... */
422 return;
423 }
424
425 /* send octet */
426
427 Outb(scc->data,*skb->data);
428 skb_pull(skb, 1);
429 }
430
431
432 /* External/Status interrupt handler */
scc_exint(struct scc_channel * scc)433 static inline void scc_exint(struct scc_channel *scc)
434 {
435 unsigned char status,changes,chg_and_stat;
436
437 scc->stat.exints++;
438
439 status = InReg(scc->ctrl,R0);
440 changes = status ^ scc->status;
441 chg_and_stat = changes & status;
442
443 /* ABORT: generated whenever DCD drops while receiving */
444
445 if (chg_and_stat & BRK_ABRT) /* Received an ABORT */
446 flush_rx_FIFO(scc);
447
448 /* HUNT: software DCD; on = waiting for SYNC, off = receiving frame */
449
450 if ((changes & SYNC_HUNT) && scc->kiss.softdcd)
451 {
452 if (status & SYNC_HUNT)
453 {
454 scc->dcd = 0;
455 flush_rx_FIFO(scc);
456 if ((scc->modem.clocksrc != CLK_EXTERNAL))
457 OutReg(scc->ctrl,R14,SEARCH|scc->wreg[R14]); /* DPLL: enter search mode */
458 } else {
459 scc->dcd = 1;
460 }
461
462 scc_notify(scc, scc->dcd? HWEV_DCD_OFF:HWEV_DCD_ON);
463 }
464
465 /* DCD: on = start to receive packet, off = ABORT condition */
466 /* (a successfully received packet generates a special condition int) */
467
468 if((changes & DCD) && !scc->kiss.softdcd) /* DCD input changed state */
469 {
470 if(status & DCD) /* DCD is now ON */
471 {
472 start_hunt(scc);
473 scc->dcd = 1;
474 } else { /* DCD is now OFF */
475 cl(scc,R3,ENT_HM|RxENABLE); /* disable the receiver */
476 flush_rx_FIFO(scc);
477 scc->dcd = 0;
478 }
479
480 scc_notify(scc, scc->dcd? HWEV_DCD_ON:HWEV_DCD_OFF);
481 }
482
483 #ifdef notdef
484 /* CTS: use external TxDelay (what's that good for?!)
485 * Anyway: If we _could_ use it (BayCom USCC uses CTS for
486 * own purposes) we _should_ use the "autoenable" feature
487 * of the Z8530 and not this interrupt...
488 */
489
490 if (chg_and_stat & CTS) /* CTS is now ON */
491 {
492 if (scc->kiss.txdelay == 0) /* zero TXDELAY = wait for CTS */
493 scc_start_tx_timer(scc, t_txdelay, 0);
494 }
495 #endif
496
497 if (scc->stat.tx_state == TXS_ACTIVE && (status & TxEOM))
498 {
499 scc->stat.tx_under++; /* oops, an underrun! count 'em */
500 Outb(scc->ctrl, RES_EXT_INT); /* reset ext/status interrupts */
501
502 if (scc->tx_buff != NULL)
503 {
504 dev_kfree_skb_irq(scc->tx_buff);
505 scc->tx_buff = NULL;
506 }
507
508 or(scc,R10,ABUNDER);
509 scc_start_tx_timer(scc, t_txdelay, 0); /* restart transmission */
510 }
511
512 scc->status = status;
513 Outb(scc->ctrl,RES_EXT_INT);
514 }
515
516
517 /* Receiver interrupt handler */
scc_rxint(struct scc_channel * scc)518 static inline void scc_rxint(struct scc_channel *scc)
519 {
520 struct sk_buff *skb;
521
522 scc->stat.rxints++;
523
524 if((scc->wreg[5] & RTS) && scc->kiss.fulldup == KISS_DUPLEX_HALF)
525 {
526 Inb(scc->data); /* discard char */
527 or(scc,R3,ENT_HM); /* enter hunt mode for next flag */
528 return;
529 }
530
531 skb = scc->rx_buff;
532
533 if (skb == NULL)
534 {
535 skb = dev_alloc_skb(scc->stat.bufsize);
536 if (skb == NULL)
537 {
538 scc->dev_stat.rx_dropped++;
539 scc->stat.nospace++;
540 Inb(scc->data);
541 or(scc, R3, ENT_HM);
542 return;
543 }
544
545 scc->rx_buff = skb;
546 skb_put_u8(skb, 0); /* KISS data */
547 }
548
549 if (skb->len >= scc->stat.bufsize)
550 {
551 #ifdef notdef
552 printk(KERN_DEBUG "z8530drv: oops, scc_rxint() received huge frame...\n");
553 #endif
554 dev_kfree_skb_irq(skb);
555 scc->rx_buff = NULL;
556 Inb(scc->data);
557 or(scc, R3, ENT_HM);
558 return;
559 }
560
561 skb_put_u8(skb, Inb(scc->data));
562 }
563
564
565 /* Receive Special Condition interrupt handler */
scc_spint(struct scc_channel * scc)566 static inline void scc_spint(struct scc_channel *scc)
567 {
568 unsigned char status;
569 struct sk_buff *skb;
570
571 scc->stat.spints++;
572
573 status = InReg(scc->ctrl,R1); /* read receiver status */
574
575 Inb(scc->data); /* throw away Rx byte */
576 skb = scc->rx_buff;
577
578 if(status & Rx_OVR) /* receiver overrun */
579 {
580 scc->stat.rx_over++; /* count them */
581 or(scc,R3,ENT_HM); /* enter hunt mode for next flag */
582
583 if (skb != NULL)
584 dev_kfree_skb_irq(skb);
585 scc->rx_buff = skb = NULL;
586 }
587
588 if(status & END_FR && skb != NULL) /* end of frame */
589 {
590 /* CRC okay, frame ends on 8 bit boundary and received something ? */
591
592 if (!(status & CRC_ERR) && (status & 0xe) == RES8 && skb->len > 0)
593 {
594 /* ignore last received byte (first of the CRC bytes) */
595 skb_trim(skb, skb->len-1);
596 scc_net_rx(scc, skb);
597 scc->rx_buff = NULL;
598 scc->stat.rxframes++;
599 } else { /* a bad frame */
600 dev_kfree_skb_irq(skb);
601 scc->rx_buff = NULL;
602 scc->stat.rxerrs++;
603 }
604 }
605
606 Outb(scc->ctrl,ERR_RES);
607 }
608
609
610 /* ----> interrupt service routine for the Z8530 <---- */
611
scc_isr_dispatch(struct scc_channel * scc,int vector)612 static void scc_isr_dispatch(struct scc_channel *scc, int vector)
613 {
614 spin_lock(&scc->lock);
615 switch (vector & VECTOR_MASK)
616 {
617 case TXINT: scc_txint(scc); break;
618 case EXINT: scc_exint(scc); break;
619 case RXINT: scc_rxint(scc); break;
620 case SPINT: scc_spint(scc); break;
621 }
622 spin_unlock(&scc->lock);
623 }
624
625 /* If the card has a latch for the interrupt vector (like the PA0HZP card)
626 use it to get the number of the chip that generated the int.
627 If not: poll all defined chips.
628 */
629
630 #define SCC_IRQTIMEOUT 30000
631
scc_isr(int irq,void * dev_id)632 static irqreturn_t scc_isr(int irq, void *dev_id)
633 {
634 int chip_irq = (long) dev_id;
635 unsigned char vector;
636 struct scc_channel *scc;
637 struct scc_ctrl *ctrl;
638 int k;
639
640 if (Vector_Latch)
641 {
642 for(k=0; k < SCC_IRQTIMEOUT; k++)
643 {
644 Outb(Vector_Latch, 0); /* Generate INTACK */
645
646 /* Read the vector */
647 if((vector=Inb(Vector_Latch)) >= 16 * Nchips) break;
648 if (vector & 0x01) break;
649
650 scc=&SCC_Info[vector >> 3 ^ 0x01];
651 if (!scc->dev) break;
652
653 scc_isr_dispatch(scc, vector);
654
655 OutReg(scc->ctrl,R0,RES_H_IUS); /* Reset Highest IUS */
656 }
657
658 if (k == SCC_IRQTIMEOUT)
659 printk(KERN_WARNING "z8530drv: endless loop in scc_isr()?\n");
660
661 return IRQ_HANDLED;
662 }
663
664 /* Find the SCC generating the interrupt by polling all attached SCCs
665 * reading RR3A (the interrupt pending register)
666 */
667
668 ctrl = SCC_ctrl;
669 while (ctrl->chan_A)
670 {
671 if (ctrl->irq != chip_irq)
672 {
673 ctrl++;
674 continue;
675 }
676
677 scc = NULL;
678 for (k = 0; InReg(ctrl->chan_A,R3) && k < SCC_IRQTIMEOUT; k++)
679 {
680 vector=InReg(ctrl->chan_B,R2); /* Read the vector */
681 if (vector & 0x01) break;
682
683 scc = &SCC_Info[vector >> 3 ^ 0x01];
684 if (!scc->dev) break;
685
686 scc_isr_dispatch(scc, vector);
687 }
688
689 if (k == SCC_IRQTIMEOUT)
690 {
691 printk(KERN_WARNING "z8530drv: endless loop in scc_isr()?!\n");
692 break;
693 }
694
695 /* This looks weird and it is. At least the BayCom USCC doesn't
696 * use the Interrupt Daisy Chain, thus we'll have to start
697 * all over again to be sure not to miss an interrupt from
698 * (any of) the other chip(s)...
699 * Honestly, the situation *is* braindamaged...
700 */
701
702 if (scc != NULL)
703 {
704 OutReg(scc->ctrl,R0,RES_H_IUS);
705 ctrl = SCC_ctrl;
706 } else
707 ctrl++;
708 }
709 return IRQ_HANDLED;
710 }
711
712
713
714 /* ******************************************************************** */
715 /* * Init Channel */
716 /* ******************************************************************** */
717
718
719 /* ----> set SCC channel speed <---- */
720
set_brg(struct scc_channel * scc,unsigned int tc)721 static inline void set_brg(struct scc_channel *scc, unsigned int tc)
722 {
723 cl(scc,R14,BRENABL); /* disable baudrate generator */
724 wr(scc,R12,tc & 255); /* brg rate LOW */
725 wr(scc,R13,tc >> 8); /* brg rate HIGH */
726 or(scc,R14,BRENABL); /* enable baudrate generator */
727 }
728
set_speed(struct scc_channel * scc)729 static inline void set_speed(struct scc_channel *scc)
730 {
731 unsigned long flags;
732 spin_lock_irqsave(&scc->lock, flags);
733
734 if (scc->modem.speed > 0) /* paranoia... */
735 set_brg(scc, (unsigned) (scc->clock / (scc->modem.speed * 64)) - 2);
736
737 spin_unlock_irqrestore(&scc->lock, flags);
738 }
739
740
741 /* ----> initialize a SCC channel <---- */
742
init_brg(struct scc_channel * scc)743 static inline void init_brg(struct scc_channel *scc)
744 {
745 wr(scc, R14, BRSRC); /* BRG source = PCLK */
746 OutReg(scc->ctrl, R14, SSBR|scc->wreg[R14]); /* DPLL source = BRG */
747 OutReg(scc->ctrl, R14, SNRZI|scc->wreg[R14]); /* DPLL NRZI mode */
748 }
749
750 /*
751 * Initialization according to the Z8530 manual (SGS-Thomson's version):
752 *
753 * 1. Modes and constants
754 *
755 * WR9 11000000 chip reset
756 * WR4 XXXXXXXX Tx/Rx control, async or sync mode
757 * WR1 0XX00X00 select W/REQ (optional)
758 * WR2 XXXXXXXX program interrupt vector
759 * WR3 XXXXXXX0 select Rx control
760 * WR5 XXXX0XXX select Tx control
761 * WR6 XXXXXXXX sync character
762 * WR7 XXXXXXXX sync character
763 * WR9 000X0XXX select interrupt control
764 * WR10 XXXXXXXX miscellaneous control (optional)
765 * WR11 XXXXXXXX clock control
766 * WR12 XXXXXXXX time constant lower byte (optional)
767 * WR13 XXXXXXXX time constant upper byte (optional)
768 * WR14 XXXXXXX0 miscellaneous control
769 * WR14 XXXSSSSS commands (optional)
770 *
771 * 2. Enables
772 *
773 * WR14 000SSSS1 baud rate enable
774 * WR3 SSSSSSS1 Rx enable
775 * WR5 SSSS1SSS Tx enable
776 * WR0 10000000 reset Tx CRG (optional)
777 * WR1 XSS00S00 DMA enable (optional)
778 *
779 * 3. Interrupt status
780 *
781 * WR15 XXXXXXXX enable external/status
782 * WR0 00010000 reset external status
783 * WR0 00010000 reset external status twice
784 * WR1 SSSXXSXX enable Rx, Tx and Ext/status
785 * WR9 000SXSSS enable master interrupt enable
786 *
787 * 1 = set to one, 0 = reset to zero
788 * X = user defined, S = same as previous init
789 *
790 *
791 * Note that the implementation differs in some points from above scheme.
792 *
793 */
794
init_channel(struct scc_channel * scc)795 static void init_channel(struct scc_channel *scc)
796 {
797 del_timer(&scc->tx_t);
798 del_timer(&scc->tx_wdog);
799
800 disable_irq(scc->irq);
801
802 wr(scc,R4,X1CLK|SDLC); /* *1 clock, SDLC mode */
803 wr(scc,R1,0); /* no W/REQ operation */
804 wr(scc,R3,Rx8|RxCRC_ENAB); /* RX 8 bits/char, CRC, disabled */
805 wr(scc,R5,Tx8|DTR|TxCRC_ENAB); /* TX 8 bits/char, disabled, DTR */
806 wr(scc,R6,0); /* SDLC address zero (not used) */
807 wr(scc,R7,FLAG); /* SDLC flag value */
808 wr(scc,R9,VIS); /* vector includes status */
809 wr(scc,R10,(scc->modem.nrz? NRZ : NRZI)|CRCPS|ABUNDER); /* abort on underrun, preset CRC generator, NRZ(I) */
810 wr(scc,R14, 0);
811
812
813 /* set clock sources:
814
815 CLK_DPLL: normal halfduplex operation
816
817 RxClk: use DPLL
818 TxClk: use DPLL
819 TRxC mode DPLL output
820
821 CLK_EXTERNAL: external clocking (G3RUH or DF9IC modem)
822
823 BayCom: others:
824
825 TxClk = pin RTxC TxClk = pin TRxC
826 RxClk = pin TRxC RxClk = pin RTxC
827
828
829 CLK_DIVIDER:
830 RxClk = use DPLL
831 TxClk = pin RTxC
832
833 BayCom: others:
834 pin TRxC = DPLL pin TRxC = BRG
835 (RxClk * 1) (RxClk * 32)
836 */
837
838
839 switch(scc->modem.clocksrc)
840 {
841 case CLK_DPLL:
842 wr(scc, R11, RCDPLL|TCDPLL|TRxCOI|TRxCDP);
843 init_brg(scc);
844 break;
845
846 case CLK_DIVIDER:
847 wr(scc, R11, ((scc->brand & BAYCOM)? TRxCDP : TRxCBR) | RCDPLL|TCRTxCP|TRxCOI);
848 init_brg(scc);
849 break;
850
851 case CLK_EXTERNAL:
852 wr(scc, R11, (scc->brand & BAYCOM)? RCTRxCP|TCRTxCP : RCRTxCP|TCTRxCP);
853 OutReg(scc->ctrl, R14, DISDPLL);
854 break;
855
856 }
857
858 set_speed(scc); /* set baudrate */
859
860 if(scc->enhanced)
861 {
862 or(scc,R15,SHDLCE|FIFOE); /* enable FIFO, SDLC/HDLC Enhancements (From now R7 is R7') */
863 wr(scc,R7,AUTOEOM);
864 }
865
866 if(scc->kiss.softdcd || (InReg(scc->ctrl,R0) & DCD))
867 /* DCD is now ON */
868 {
869 start_hunt(scc);
870 }
871
872 /* enable ABORT, DCD & SYNC/HUNT interrupts */
873
874 wr(scc,R15, BRKIE|TxUIE|(scc->kiss.softdcd? SYNCIE:DCDIE));
875
876 Outb(scc->ctrl,RES_EXT_INT); /* reset ext/status interrupts */
877 Outb(scc->ctrl,RES_EXT_INT); /* must be done twice */
878
879 or(scc,R1,INT_ALL_Rx|TxINT_ENAB|EXT_INT_ENAB); /* enable interrupts */
880
881 scc->status = InReg(scc->ctrl,R0); /* read initial status */
882
883 or(scc,R9,MIE); /* master interrupt enable */
884
885 scc_init_timer(scc);
886
887 enable_irq(scc->irq);
888 }
889
890
891
892
893 /* ******************************************************************** */
894 /* * SCC timer functions * */
895 /* ******************************************************************** */
896
897
898 /* ----> scc_key_trx sets the time constant for the baudrate
899 generator and keys the transmitter <---- */
900
scc_key_trx(struct scc_channel * scc,char tx)901 static void scc_key_trx(struct scc_channel *scc, char tx)
902 {
903 unsigned int time_const;
904
905 if (scc->brand & PRIMUS)
906 Outb(scc->ctrl + 4, scc->option | (tx? 0x80 : 0));
907
908 if (scc->modem.speed < 300)
909 scc->modem.speed = 1200;
910
911 time_const = (unsigned) (scc->clock / (scc->modem.speed * (tx? 2:64))) - 2;
912
913 disable_irq(scc->irq);
914
915 if (tx)
916 {
917 or(scc, R1, TxINT_ENAB); /* t_maxkeyup may have reset these */
918 or(scc, R15, TxUIE);
919 }
920
921 if (scc->modem.clocksrc == CLK_DPLL)
922 { /* force simplex operation */
923 if (tx)
924 {
925 #ifdef CONFIG_SCC_TRXECHO
926 cl(scc, R3, RxENABLE|ENT_HM); /* switch off receiver */
927 cl(scc, R15, DCDIE|SYNCIE); /* No DCD changes, please */
928 #endif
929 set_brg(scc, time_const); /* reprogram baudrate generator */
930
931 /* DPLL -> Rx clk, BRG -> Tx CLK, TRxC mode output, TRxC = BRG */
932 wr(scc, R11, RCDPLL|TCBR|TRxCOI|TRxCBR);
933
934 /* By popular demand: tx_inhibit */
935 if (scc->kiss.tx_inhibit)
936 {
937 or(scc,R5, TxENAB);
938 scc->wreg[R5] |= RTS;
939 } else {
940 or(scc,R5,RTS|TxENAB); /* set the RTS line and enable TX */
941 }
942 } else {
943 cl(scc,R5,RTS|TxENAB);
944
945 set_brg(scc, time_const); /* reprogram baudrate generator */
946
947 /* DPLL -> Rx clk, DPLL -> Tx CLK, TRxC mode output, TRxC = DPLL */
948 wr(scc, R11, RCDPLL|TCDPLL|TRxCOI|TRxCDP);
949
950 #ifndef CONFIG_SCC_TRXECHO
951 if (scc->kiss.softdcd)
952 #endif
953 {
954 or(scc,R15, scc->kiss.softdcd? SYNCIE:DCDIE);
955 start_hunt(scc);
956 }
957 }
958 } else {
959 if (tx)
960 {
961 #ifdef CONFIG_SCC_TRXECHO
962 if (scc->kiss.fulldup == KISS_DUPLEX_HALF)
963 {
964 cl(scc, R3, RxENABLE);
965 cl(scc, R15, DCDIE|SYNCIE);
966 }
967 #endif
968
969 if (scc->kiss.tx_inhibit)
970 {
971 or(scc,R5, TxENAB);
972 scc->wreg[R5] |= RTS;
973 } else {
974 or(scc,R5,RTS|TxENAB); /* enable tx */
975 }
976 } else {
977 cl(scc,R5,RTS|TxENAB); /* disable tx */
978
979 if ((scc->kiss.fulldup == KISS_DUPLEX_HALF) &&
980 #ifndef CONFIG_SCC_TRXECHO
981 scc->kiss.softdcd)
982 #else
983 1)
984 #endif
985 {
986 or(scc, R15, scc->kiss.softdcd? SYNCIE:DCDIE);
987 start_hunt(scc);
988 }
989 }
990 }
991
992 enable_irq(scc->irq);
993 }
994
995
996 /* ----> SCC timer interrupt handler and friends. <---- */
997
__scc_start_tx_timer(struct scc_channel * scc,void (* handler)(struct timer_list * t),unsigned long when)998 static void __scc_start_tx_timer(struct scc_channel *scc,
999 void (*handler)(struct timer_list *t),
1000 unsigned long when)
1001 {
1002 del_timer(&scc->tx_t);
1003
1004 if (when == 0)
1005 {
1006 handler(&scc->tx_t);
1007 } else
1008 if (when != TIMER_OFF)
1009 {
1010 scc->tx_t.function = handler;
1011 scc->tx_t.expires = jiffies + (when*HZ)/100;
1012 add_timer(&scc->tx_t);
1013 }
1014 }
1015
scc_start_tx_timer(struct scc_channel * scc,void (* handler)(struct timer_list * t),unsigned long when)1016 static void scc_start_tx_timer(struct scc_channel *scc,
1017 void (*handler)(struct timer_list *t),
1018 unsigned long when)
1019 {
1020 unsigned long flags;
1021
1022 spin_lock_irqsave(&scc->lock, flags);
1023 __scc_start_tx_timer(scc, handler, when);
1024 spin_unlock_irqrestore(&scc->lock, flags);
1025 }
1026
scc_start_defer(struct scc_channel * scc)1027 static void scc_start_defer(struct scc_channel *scc)
1028 {
1029 unsigned long flags;
1030
1031 spin_lock_irqsave(&scc->lock, flags);
1032 del_timer(&scc->tx_wdog);
1033
1034 if (scc->kiss.maxdefer != 0 && scc->kiss.maxdefer != TIMER_OFF)
1035 {
1036 scc->tx_wdog.function = t_busy;
1037 scc->tx_wdog.expires = jiffies + HZ*scc->kiss.maxdefer;
1038 add_timer(&scc->tx_wdog);
1039 }
1040 spin_unlock_irqrestore(&scc->lock, flags);
1041 }
1042
scc_start_maxkeyup(struct scc_channel * scc)1043 static void scc_start_maxkeyup(struct scc_channel *scc)
1044 {
1045 unsigned long flags;
1046
1047 spin_lock_irqsave(&scc->lock, flags);
1048 del_timer(&scc->tx_wdog);
1049
1050 if (scc->kiss.maxkeyup != 0 && scc->kiss.maxkeyup != TIMER_OFF)
1051 {
1052 scc->tx_wdog.function = t_maxkeyup;
1053 scc->tx_wdog.expires = jiffies + HZ*scc->kiss.maxkeyup;
1054 add_timer(&scc->tx_wdog);
1055 }
1056 spin_unlock_irqrestore(&scc->lock, flags);
1057 }
1058
1059 /*
1060 * This is called from scc_txint() when there are no more frames to send.
1061 * Not exactly a timer function, but it is a close friend of the family...
1062 */
1063
scc_tx_done(struct scc_channel * scc)1064 static void scc_tx_done(struct scc_channel *scc)
1065 {
1066 /*
1067 * trx remains keyed in fulldup mode 2 until t_idle expires.
1068 */
1069
1070 switch (scc->kiss.fulldup)
1071 {
1072 case KISS_DUPLEX_LINK:
1073 scc->stat.tx_state = TXS_IDLE2;
1074 if (scc->kiss.idletime != TIMER_OFF)
1075 scc_start_tx_timer(scc, t_idle,
1076 scc->kiss.idletime*100);
1077 break;
1078 case KISS_DUPLEX_OPTIMA:
1079 scc_notify(scc, HWEV_ALL_SENT);
1080 break;
1081 default:
1082 scc->stat.tx_state = TXS_BUSY;
1083 scc_start_tx_timer(scc, t_tail, scc->kiss.tailtime);
1084 }
1085
1086 netif_wake_queue(scc->dev);
1087 }
1088
1089
1090 static unsigned char Rand = 17;
1091
is_grouped(struct scc_channel * scc)1092 static inline int is_grouped(struct scc_channel *scc)
1093 {
1094 int k;
1095 struct scc_channel *scc2;
1096 unsigned char grp1, grp2;
1097
1098 grp1 = scc->kiss.group;
1099
1100 for (k = 0; k < (Nchips * 2); k++)
1101 {
1102 scc2 = &SCC_Info[k];
1103 grp2 = scc2->kiss.group;
1104
1105 if (scc2 == scc || !(scc2->dev && grp2))
1106 continue;
1107
1108 if ((grp1 & 0x3f) == (grp2 & 0x3f))
1109 {
1110 if ( (grp1 & TXGROUP) && (scc2->wreg[R5] & RTS) )
1111 return 1;
1112
1113 if ( (grp1 & RXGROUP) && scc2->dcd )
1114 return 1;
1115 }
1116 }
1117 return 0;
1118 }
1119
1120 /* DWAIT and SLOTTIME expired
1121 *
1122 * fulldup == 0: DCD is active or Rand > P-persistence: start t_busy timer
1123 * else key trx and start txdelay
1124 * fulldup == 1: key trx and start txdelay
1125 * fulldup == 2: mintime expired, reset status or key trx and start txdelay
1126 */
1127
t_dwait(struct timer_list * t)1128 static void t_dwait(struct timer_list *t)
1129 {
1130 struct scc_channel *scc = from_timer(scc, t, tx_t);
1131
1132 if (scc->stat.tx_state == TXS_WAIT) /* maxkeyup or idle timeout */
1133 {
1134 if (skb_queue_empty(&scc->tx_queue)) { /* nothing to send */
1135 scc->stat.tx_state = TXS_IDLE;
1136 netif_wake_queue(scc->dev); /* t_maxkeyup locked it. */
1137 return;
1138 }
1139
1140 scc->stat.tx_state = TXS_BUSY;
1141 }
1142
1143 if (scc->kiss.fulldup == KISS_DUPLEX_HALF)
1144 {
1145 Rand = Rand * 17 + 31;
1146
1147 if (scc->dcd || (scc->kiss.persist) < Rand || (scc->kiss.group && is_grouped(scc)) )
1148 {
1149 scc_start_defer(scc);
1150 scc_start_tx_timer(scc, t_dwait, scc->kiss.slottime);
1151 return ;
1152 }
1153 }
1154
1155 if ( !(scc->wreg[R5] & RTS) )
1156 {
1157 scc_key_trx(scc, TX_ON);
1158 scc_start_tx_timer(scc, t_txdelay, scc->kiss.txdelay);
1159 } else {
1160 scc_start_tx_timer(scc, t_txdelay, 0);
1161 }
1162 }
1163
1164
1165 /* TXDELAY expired
1166 *
1167 * kick transmission by a fake scc_txint(scc), start 'maxkeyup' watchdog.
1168 */
1169
t_txdelay(struct timer_list * t)1170 static void t_txdelay(struct timer_list *t)
1171 {
1172 struct scc_channel *scc = from_timer(scc, t, tx_t);
1173
1174 scc_start_maxkeyup(scc);
1175
1176 if (scc->tx_buff == NULL)
1177 {
1178 disable_irq(scc->irq);
1179 scc_txint(scc);
1180 enable_irq(scc->irq);
1181 }
1182 }
1183
1184
1185 /* TAILTIME expired
1186 *
1187 * switch off transmitter. If we were stopped by Maxkeyup restart
1188 * transmission after 'mintime' seconds
1189 */
1190
t_tail(struct timer_list * t)1191 static void t_tail(struct timer_list *t)
1192 {
1193 struct scc_channel *scc = from_timer(scc, t, tx_t);
1194 unsigned long flags;
1195
1196 spin_lock_irqsave(&scc->lock, flags);
1197 del_timer(&scc->tx_wdog);
1198 scc_key_trx(scc, TX_OFF);
1199 spin_unlock_irqrestore(&scc->lock, flags);
1200
1201 if (scc->stat.tx_state == TXS_TIMEOUT) /* we had a timeout? */
1202 {
1203 scc->stat.tx_state = TXS_WAIT;
1204 scc_start_tx_timer(scc, t_dwait, scc->kiss.mintime*100);
1205 return;
1206 }
1207
1208 scc->stat.tx_state = TXS_IDLE;
1209 netif_wake_queue(scc->dev);
1210 }
1211
1212
1213 /* BUSY timeout
1214 *
1215 * throw away send buffers if DCD remains active too long.
1216 */
1217
t_busy(struct timer_list * t)1218 static void t_busy(struct timer_list *t)
1219 {
1220 struct scc_channel *scc = from_timer(scc, t, tx_wdog);
1221
1222 del_timer(&scc->tx_t);
1223 netif_stop_queue(scc->dev); /* don't pile on the wabbit! */
1224
1225 scc_discard_buffers(scc);
1226 scc->stat.txerrs++;
1227 scc->stat.tx_state = TXS_IDLE;
1228
1229 netif_wake_queue(scc->dev);
1230 }
1231
1232 /* MAXKEYUP timeout
1233 *
1234 * this is our watchdog.
1235 */
1236
t_maxkeyup(struct timer_list * t)1237 static void t_maxkeyup(struct timer_list *t)
1238 {
1239 struct scc_channel *scc = from_timer(scc, t, tx_wdog);
1240 unsigned long flags;
1241
1242 spin_lock_irqsave(&scc->lock, flags);
1243 /*
1244 * let things settle down before we start to
1245 * accept new data.
1246 */
1247
1248 netif_stop_queue(scc->dev);
1249 scc_discard_buffers(scc);
1250
1251 del_timer(&scc->tx_t);
1252
1253 cl(scc, R1, TxINT_ENAB); /* force an ABORT, but don't */
1254 cl(scc, R15, TxUIE); /* count it. */
1255 OutReg(scc->ctrl, R0, RES_Tx_P);
1256
1257 spin_unlock_irqrestore(&scc->lock, flags);
1258
1259 scc->stat.txerrs++;
1260 scc->stat.tx_state = TXS_TIMEOUT;
1261 scc_start_tx_timer(scc, t_tail, scc->kiss.tailtime);
1262 }
1263
1264 /* IDLE timeout
1265 *
1266 * in fulldup mode 2 it keys down the transmitter after 'idle' seconds
1267 * of inactivity. We will not restart transmission before 'mintime'
1268 * expires.
1269 */
1270
t_idle(struct timer_list * t)1271 static void t_idle(struct timer_list *t)
1272 {
1273 struct scc_channel *scc = from_timer(scc, t, tx_t);
1274
1275 del_timer(&scc->tx_wdog);
1276
1277 scc_key_trx(scc, TX_OFF);
1278 if(scc->kiss.mintime)
1279 scc_start_tx_timer(scc, t_dwait, scc->kiss.mintime*100);
1280 scc->stat.tx_state = TXS_WAIT;
1281 }
1282
scc_init_timer(struct scc_channel * scc)1283 static void scc_init_timer(struct scc_channel *scc)
1284 {
1285 unsigned long flags;
1286
1287 spin_lock_irqsave(&scc->lock, flags);
1288 scc->stat.tx_state = TXS_IDLE;
1289 spin_unlock_irqrestore(&scc->lock, flags);
1290 }
1291
1292
1293 /* ******************************************************************** */
1294 /* * Set/get L1 parameters * */
1295 /* ******************************************************************** */
1296
1297
1298 /*
1299 * this will set the "hardware" parameters through KISS commands or ioctl()
1300 */
1301
1302 #define CAST(x) (unsigned long)(x)
1303
scc_set_param(struct scc_channel * scc,unsigned int cmd,unsigned int arg)1304 static unsigned int scc_set_param(struct scc_channel *scc, unsigned int cmd, unsigned int arg)
1305 {
1306 switch (cmd)
1307 {
1308 case PARAM_TXDELAY: scc->kiss.txdelay=arg; break;
1309 case PARAM_PERSIST: scc->kiss.persist=arg; break;
1310 case PARAM_SLOTTIME: scc->kiss.slottime=arg; break;
1311 case PARAM_TXTAIL: scc->kiss.tailtime=arg; break;
1312 case PARAM_FULLDUP: scc->kiss.fulldup=arg; break;
1313 case PARAM_DTR: break; /* does someone need this? */
1314 case PARAM_GROUP: scc->kiss.group=arg; break;
1315 case PARAM_IDLE: scc->kiss.idletime=arg; break;
1316 case PARAM_MIN: scc->kiss.mintime=arg; break;
1317 case PARAM_MAXKEY: scc->kiss.maxkeyup=arg; break;
1318 case PARAM_WAIT: scc->kiss.waittime=arg; break;
1319 case PARAM_MAXDEFER: scc->kiss.maxdefer=arg; break;
1320 case PARAM_TX: scc->kiss.tx_inhibit=arg; break;
1321
1322 case PARAM_SOFTDCD:
1323 scc->kiss.softdcd=arg;
1324 if (arg)
1325 {
1326 or(scc, R15, SYNCIE);
1327 cl(scc, R15, DCDIE);
1328 start_hunt(scc);
1329 } else {
1330 or(scc, R15, DCDIE);
1331 cl(scc, R15, SYNCIE);
1332 }
1333 break;
1334
1335 case PARAM_SPEED:
1336 if (arg < 256)
1337 scc->modem.speed=arg*100;
1338 else
1339 scc->modem.speed=arg;
1340
1341 if (scc->stat.tx_state == 0) /* only switch baudrate on rx... ;-) */
1342 set_speed(scc);
1343 break;
1344
1345 case PARAM_RTS:
1346 if ( !(scc->wreg[R5] & RTS) )
1347 {
1348 if (arg != TX_OFF) {
1349 scc_key_trx(scc, TX_ON);
1350 scc_start_tx_timer(scc, t_txdelay, scc->kiss.txdelay);
1351 }
1352 } else {
1353 if (arg == TX_OFF)
1354 {
1355 scc->stat.tx_state = TXS_BUSY;
1356 scc_start_tx_timer(scc, t_tail, scc->kiss.tailtime);
1357 }
1358 }
1359 break;
1360
1361 case PARAM_HWEVENT:
1362 scc_notify(scc, scc->dcd? HWEV_DCD_ON:HWEV_DCD_OFF);
1363 break;
1364
1365 default: return -EINVAL;
1366 }
1367
1368 return 0;
1369 }
1370
1371
1372
scc_get_param(struct scc_channel * scc,unsigned int cmd)1373 static unsigned long scc_get_param(struct scc_channel *scc, unsigned int cmd)
1374 {
1375 switch (cmd)
1376 {
1377 case PARAM_TXDELAY: return CAST(scc->kiss.txdelay);
1378 case PARAM_PERSIST: return CAST(scc->kiss.persist);
1379 case PARAM_SLOTTIME: return CAST(scc->kiss.slottime);
1380 case PARAM_TXTAIL: return CAST(scc->kiss.tailtime);
1381 case PARAM_FULLDUP: return CAST(scc->kiss.fulldup);
1382 case PARAM_SOFTDCD: return CAST(scc->kiss.softdcd);
1383 case PARAM_DTR: return CAST((scc->wreg[R5] & DTR)? 1:0);
1384 case PARAM_RTS: return CAST((scc->wreg[R5] & RTS)? 1:0);
1385 case PARAM_SPEED: return CAST(scc->modem.speed);
1386 case PARAM_GROUP: return CAST(scc->kiss.group);
1387 case PARAM_IDLE: return CAST(scc->kiss.idletime);
1388 case PARAM_MIN: return CAST(scc->kiss.mintime);
1389 case PARAM_MAXKEY: return CAST(scc->kiss.maxkeyup);
1390 case PARAM_WAIT: return CAST(scc->kiss.waittime);
1391 case PARAM_MAXDEFER: return CAST(scc->kiss.maxdefer);
1392 case PARAM_TX: return CAST(scc->kiss.tx_inhibit);
1393 default: return NO_SUCH_PARAM;
1394 }
1395
1396 }
1397
1398 #undef CAST
1399
1400 /* ******************************************************************* */
1401 /* * Send calibration pattern * */
1402 /* ******************************************************************* */
1403
scc_stop_calibrate(struct timer_list * t)1404 static void scc_stop_calibrate(struct timer_list *t)
1405 {
1406 struct scc_channel *scc = from_timer(scc, t, tx_wdog);
1407 unsigned long flags;
1408
1409 spin_lock_irqsave(&scc->lock, flags);
1410 del_timer(&scc->tx_wdog);
1411 scc_key_trx(scc, TX_OFF);
1412 wr(scc, R6, 0);
1413 wr(scc, R7, FLAG);
1414 Outb(scc->ctrl,RES_EXT_INT); /* reset ext/status interrupts */
1415 Outb(scc->ctrl,RES_EXT_INT);
1416
1417 netif_wake_queue(scc->dev);
1418 spin_unlock_irqrestore(&scc->lock, flags);
1419 }
1420
1421
1422 static void
scc_start_calibrate(struct scc_channel * scc,int duration,unsigned char pattern)1423 scc_start_calibrate(struct scc_channel *scc, int duration, unsigned char pattern)
1424 {
1425 unsigned long flags;
1426
1427 spin_lock_irqsave(&scc->lock, flags);
1428 netif_stop_queue(scc->dev);
1429 scc_discard_buffers(scc);
1430
1431 del_timer(&scc->tx_wdog);
1432
1433 scc->tx_wdog.function = scc_stop_calibrate;
1434 scc->tx_wdog.expires = jiffies + HZ*duration;
1435 add_timer(&scc->tx_wdog);
1436
1437 /* This doesn't seem to work. Why not? */
1438 wr(scc, R6, 0);
1439 wr(scc, R7, pattern);
1440
1441 /*
1442 * Don't know if this works.
1443 * Damn, where is my Z8530 programming manual...?
1444 */
1445
1446 Outb(scc->ctrl,RES_EXT_INT); /* reset ext/status interrupts */
1447 Outb(scc->ctrl,RES_EXT_INT);
1448
1449 scc_key_trx(scc, TX_ON);
1450 spin_unlock_irqrestore(&scc->lock, flags);
1451 }
1452
1453 /* ******************************************************************* */
1454 /* * Init channel structures, special HW, etc... * */
1455 /* ******************************************************************* */
1456
1457 /*
1458 * Reset the Z8530s and setup special hardware
1459 */
1460
z8530_init(void)1461 static void z8530_init(void)
1462 {
1463 struct scc_channel *scc;
1464 int chip, k;
1465 unsigned long flags;
1466 char *flag;
1467
1468
1469 printk(KERN_INFO "Init Z8530 driver: %u channels, IRQ", Nchips*2);
1470
1471 flag=" ";
1472 for (k = 0; k < nr_irqs; k++)
1473 if (Ivec[k].used)
1474 {
1475 printk("%s%d", flag, k);
1476 flag=",";
1477 }
1478 printk("\n");
1479
1480
1481 /* reset and pre-init all chips in the system */
1482 for (chip = 0; chip < Nchips; chip++)
1483 {
1484 scc=&SCC_Info[2*chip];
1485 if (!scc->ctrl) continue;
1486
1487 /* Special SCC cards */
1488
1489 if(scc->brand & EAGLE) /* this is an EAGLE card */
1490 Outb(scc->special,0x08); /* enable interrupt on the board */
1491
1492 if(scc->brand & (PC100 | PRIMUS)) /* this is a PC100/PRIMUS card */
1493 Outb(scc->special,scc->option); /* set the MODEM mode (0x22) */
1494
1495
1496 /* Reset and pre-init Z8530 */
1497
1498 spin_lock_irqsave(&scc->lock, flags);
1499
1500 Outb(scc->ctrl, 0);
1501 OutReg(scc->ctrl,R9,FHWRES); /* force hardware reset */
1502 udelay(100); /* give it 'a bit' more time than required */
1503 wr(scc, R2, chip*16); /* interrupt vector */
1504 wr(scc, R9, VIS); /* vector includes status */
1505 spin_unlock_irqrestore(&scc->lock, flags);
1506 }
1507
1508
1509 Driver_Initialized = 1;
1510 }
1511
1512 /*
1513 * Allocate device structure, err, instance, and register driver
1514 */
1515
scc_net_alloc(const char * name,struct scc_channel * scc)1516 static int scc_net_alloc(const char *name, struct scc_channel *scc)
1517 {
1518 int err;
1519 struct net_device *dev;
1520
1521 dev = alloc_netdev(0, name, NET_NAME_UNKNOWN, scc_net_setup);
1522 if (!dev)
1523 return -ENOMEM;
1524
1525 dev->ml_priv = scc;
1526 scc->dev = dev;
1527 spin_lock_init(&scc->lock);
1528 timer_setup(&scc->tx_t, NULL, 0);
1529 timer_setup(&scc->tx_wdog, NULL, 0);
1530
1531 err = register_netdevice(dev);
1532 if (err) {
1533 printk(KERN_ERR "%s: can't register network device (%d)\n",
1534 name, err);
1535 free_netdev(dev);
1536 scc->dev = NULL;
1537 return err;
1538 }
1539
1540 return 0;
1541 }
1542
1543
1544
1545 /* ******************************************************************** */
1546 /* * Network driver methods * */
1547 /* ******************************************************************** */
1548
1549 static const struct net_device_ops scc_netdev_ops = {
1550 .ndo_open = scc_net_open,
1551 .ndo_stop = scc_net_close,
1552 .ndo_start_xmit = scc_net_tx,
1553 .ndo_set_mac_address = scc_net_set_mac_address,
1554 .ndo_get_stats = scc_net_get_stats,
1555 .ndo_siocdevprivate = scc_net_siocdevprivate,
1556 };
1557
1558 /* ----> Initialize device <----- */
1559
scc_net_setup(struct net_device * dev)1560 static void scc_net_setup(struct net_device *dev)
1561 {
1562 dev->tx_queue_len = 16; /* should be enough... */
1563
1564 dev->netdev_ops = &scc_netdev_ops;
1565 dev->header_ops = &ax25_header_ops;
1566
1567 dev->flags = 0;
1568
1569 dev->type = ARPHRD_AX25;
1570 dev->hard_header_len = AX25_MAX_HEADER_LEN + AX25_BPQ_HEADER_LEN;
1571 dev->mtu = AX25_DEF_PACLEN;
1572 dev->addr_len = AX25_ADDR_LEN;
1573
1574 memcpy(dev->broadcast, &ax25_bcast, AX25_ADDR_LEN);
1575 dev_addr_set(dev, (u8 *)&ax25_defaddr);
1576 }
1577
1578 /* ----> open network device <---- */
1579
scc_net_open(struct net_device * dev)1580 static int scc_net_open(struct net_device *dev)
1581 {
1582 struct scc_channel *scc = (struct scc_channel *) dev->ml_priv;
1583
1584 if (!scc->init)
1585 return -EINVAL;
1586
1587 scc->tx_buff = NULL;
1588 skb_queue_head_init(&scc->tx_queue);
1589
1590 init_channel(scc);
1591
1592 netif_start_queue(dev);
1593 return 0;
1594 }
1595
1596 /* ----> close network device <---- */
1597
scc_net_close(struct net_device * dev)1598 static int scc_net_close(struct net_device *dev)
1599 {
1600 struct scc_channel *scc = (struct scc_channel *) dev->ml_priv;
1601 unsigned long flags;
1602
1603 netif_stop_queue(dev);
1604
1605 spin_lock_irqsave(&scc->lock, flags);
1606 Outb(scc->ctrl,0); /* Make sure pointer is written */
1607 wr(scc,R1,0); /* disable interrupts */
1608 wr(scc,R3,0);
1609 spin_unlock_irqrestore(&scc->lock, flags);
1610
1611 del_timer_sync(&scc->tx_t);
1612 del_timer_sync(&scc->tx_wdog);
1613
1614 scc_discard_buffers(scc);
1615
1616 return 0;
1617 }
1618
1619 /* ----> receive frame, called from scc_rxint() <---- */
1620
scc_net_rx(struct scc_channel * scc,struct sk_buff * skb)1621 static void scc_net_rx(struct scc_channel *scc, struct sk_buff *skb)
1622 {
1623 if (skb->len == 0) {
1624 dev_kfree_skb_irq(skb);
1625 return;
1626 }
1627
1628 scc->dev_stat.rx_packets++;
1629 scc->dev_stat.rx_bytes += skb->len;
1630
1631 skb->protocol = ax25_type_trans(skb, scc->dev);
1632
1633 netif_rx(skb);
1634 }
1635
1636 /* ----> transmit frame <---- */
1637
scc_net_tx(struct sk_buff * skb,struct net_device * dev)1638 static netdev_tx_t scc_net_tx(struct sk_buff *skb, struct net_device *dev)
1639 {
1640 struct scc_channel *scc = (struct scc_channel *) dev->ml_priv;
1641 unsigned long flags;
1642 char kisscmd;
1643
1644 if (skb->protocol == htons(ETH_P_IP))
1645 return ax25_ip_xmit(skb);
1646
1647 if (skb->len > scc->stat.bufsize || skb->len < 2) {
1648 scc->dev_stat.tx_dropped++; /* bogus frame */
1649 dev_kfree_skb(skb);
1650 return NETDEV_TX_OK;
1651 }
1652
1653 scc->dev_stat.tx_packets++;
1654 scc->dev_stat.tx_bytes += skb->len;
1655 scc->stat.txframes++;
1656
1657 kisscmd = *skb->data & 0x1f;
1658 skb_pull(skb, 1);
1659
1660 if (kisscmd) {
1661 scc_set_param(scc, kisscmd, *skb->data);
1662 dev_kfree_skb(skb);
1663 return NETDEV_TX_OK;
1664 }
1665
1666 spin_lock_irqsave(&scc->lock, flags);
1667
1668 if (skb_queue_len(&scc->tx_queue) > scc->dev->tx_queue_len) {
1669 struct sk_buff *skb_del;
1670 skb_del = skb_dequeue(&scc->tx_queue);
1671 dev_kfree_skb_irq(skb_del);
1672 }
1673 skb_queue_tail(&scc->tx_queue, skb);
1674 netif_trans_update(dev);
1675
1676
1677 /*
1678 * Start transmission if the trx state is idle or
1679 * t_idle hasn't expired yet. Use dwait/persistence/slottime
1680 * algorithm for normal halfduplex operation.
1681 */
1682
1683 if(scc->stat.tx_state == TXS_IDLE || scc->stat.tx_state == TXS_IDLE2) {
1684 scc->stat.tx_state = TXS_BUSY;
1685 if (scc->kiss.fulldup == KISS_DUPLEX_HALF)
1686 __scc_start_tx_timer(scc, t_dwait, scc->kiss.waittime);
1687 else
1688 __scc_start_tx_timer(scc, t_dwait, 0);
1689 }
1690 spin_unlock_irqrestore(&scc->lock, flags);
1691 return NETDEV_TX_OK;
1692 }
1693
1694 /* ----> ioctl functions <---- */
1695
1696 /*
1697 * SIOCSCCCFG - configure driver arg: (struct scc_hw_config *) arg
1698 * SIOCSCCINI - initialize driver arg: ---
1699 * SIOCSCCCHANINI - initialize channel arg: (struct scc_modem *) arg
1700 * SIOCSCCSMEM - set memory arg: (struct scc_mem_config *) arg
1701 * SIOCSCCGKISS - get level 1 parameter arg: (struct scc_kiss_cmd *) arg
1702 * SIOCSCCSKISS - set level 1 parameter arg: (struct scc_kiss_cmd *) arg
1703 * SIOCSCCGSTAT - get driver status arg: (struct scc_stat *) arg
1704 * SIOCSCCCAL - send calib. pattern arg: (struct scc_calibrate *) arg
1705 */
1706
scc_net_siocdevprivate(struct net_device * dev,struct ifreq * ifr,void __user * arg,int cmd)1707 static int scc_net_siocdevprivate(struct net_device *dev,
1708 struct ifreq *ifr, void __user *arg, int cmd)
1709 {
1710 struct scc_kiss_cmd kiss_cmd;
1711 struct scc_mem_config memcfg;
1712 struct scc_hw_config hwcfg;
1713 struct scc_calibrate cal;
1714 struct scc_channel *scc = (struct scc_channel *) dev->ml_priv;
1715 int chan;
1716 unsigned char device_name[IFNAMSIZ];
1717
1718 if (!Driver_Initialized)
1719 {
1720 if (cmd == SIOCSCCCFG)
1721 {
1722 int found = 1;
1723
1724 if (!capable(CAP_SYS_RAWIO)) return -EPERM;
1725 if (in_compat_syscall())
1726 return -EOPNOTSUPP;
1727
1728 if (!arg) return -EFAULT;
1729
1730 if (Nchips >= SCC_MAXCHIPS)
1731 return -EINVAL;
1732
1733 if (copy_from_user(&hwcfg, arg, sizeof(hwcfg)))
1734 return -EFAULT;
1735
1736 if (hwcfg.irq == 2) hwcfg.irq = 9;
1737
1738 if (hwcfg.irq < 0 || hwcfg.irq >= nr_irqs)
1739 return -EINVAL;
1740
1741 if (!Ivec[hwcfg.irq].used && hwcfg.irq)
1742 {
1743 if (request_irq(hwcfg.irq, scc_isr,
1744 0, "AX.25 SCC",
1745 (void *)(long) hwcfg.irq))
1746 printk(KERN_WARNING "z8530drv: warning, cannot get IRQ %d\n", hwcfg.irq);
1747 else
1748 Ivec[hwcfg.irq].used = 1;
1749 }
1750
1751 if (hwcfg.vector_latch && !Vector_Latch) {
1752 if (!request_region(hwcfg.vector_latch, 1, "scc vector latch"))
1753 printk(KERN_WARNING "z8530drv: warning, cannot reserve vector latch port 0x%lx\n, disabled.", hwcfg.vector_latch);
1754 else
1755 Vector_Latch = hwcfg.vector_latch;
1756 }
1757
1758 if (hwcfg.clock == 0)
1759 hwcfg.clock = SCC_DEFAULT_CLOCK;
1760
1761 #ifndef SCC_DONT_CHECK
1762
1763 if(request_region(hwcfg.ctrl_a, 1, "scc-probe"))
1764 {
1765 disable_irq(hwcfg.irq);
1766 Outb(hwcfg.ctrl_a, 0);
1767 OutReg(hwcfg.ctrl_a, R9, FHWRES);
1768 udelay(100);
1769 OutReg(hwcfg.ctrl_a,R13,0x55); /* is this chip really there? */
1770 udelay(5);
1771
1772 if (InReg(hwcfg.ctrl_a,R13) != 0x55)
1773 found = 0;
1774 enable_irq(hwcfg.irq);
1775 release_region(hwcfg.ctrl_a, 1);
1776 }
1777 else
1778 found = 0;
1779 #endif
1780
1781 if (found)
1782 {
1783 SCC_Info[2*Nchips ].ctrl = hwcfg.ctrl_a;
1784 SCC_Info[2*Nchips ].data = hwcfg.data_a;
1785 SCC_Info[2*Nchips ].irq = hwcfg.irq;
1786 SCC_Info[2*Nchips+1].ctrl = hwcfg.ctrl_b;
1787 SCC_Info[2*Nchips+1].data = hwcfg.data_b;
1788 SCC_Info[2*Nchips+1].irq = hwcfg.irq;
1789
1790 SCC_ctrl[Nchips].chan_A = hwcfg.ctrl_a;
1791 SCC_ctrl[Nchips].chan_B = hwcfg.ctrl_b;
1792 SCC_ctrl[Nchips].irq = hwcfg.irq;
1793 }
1794
1795
1796 for (chan = 0; chan < 2; chan++)
1797 {
1798 sprintf(device_name, "%s%i", SCC_DriverName, 2*Nchips+chan);
1799
1800 SCC_Info[2*Nchips+chan].special = hwcfg.special;
1801 SCC_Info[2*Nchips+chan].clock = hwcfg.clock;
1802 SCC_Info[2*Nchips+chan].brand = hwcfg.brand;
1803 SCC_Info[2*Nchips+chan].option = hwcfg.option;
1804 SCC_Info[2*Nchips+chan].enhanced = hwcfg.escc;
1805
1806 #ifdef SCC_DONT_CHECK
1807 printk(KERN_INFO "%s: data port = 0x%3.3x control port = 0x%3.3x\n",
1808 device_name,
1809 SCC_Info[2*Nchips+chan].data,
1810 SCC_Info[2*Nchips+chan].ctrl);
1811
1812 #else
1813 printk(KERN_INFO "%s: data port = 0x%3.3lx control port = 0x%3.3lx -- %s\n",
1814 device_name,
1815 chan? hwcfg.data_b : hwcfg.data_a,
1816 chan? hwcfg.ctrl_b : hwcfg.ctrl_a,
1817 found? "found" : "missing");
1818 #endif
1819
1820 if (found)
1821 {
1822 request_region(SCC_Info[2*Nchips+chan].ctrl, 1, "scc ctrl");
1823 request_region(SCC_Info[2*Nchips+chan].data, 1, "scc data");
1824 if (Nchips+chan != 0 &&
1825 scc_net_alloc(device_name,
1826 &SCC_Info[2*Nchips+chan]))
1827 return -EINVAL;
1828 }
1829 }
1830
1831 if (found) Nchips++;
1832
1833 return 0;
1834 }
1835
1836 if (cmd == SIOCSCCINI)
1837 {
1838 if (!capable(CAP_SYS_RAWIO))
1839 return -EPERM;
1840
1841 if (Nchips == 0)
1842 return -EINVAL;
1843
1844 z8530_init();
1845 return 0;
1846 }
1847
1848 return -EINVAL; /* confuse the user */
1849 }
1850
1851 if (!scc->init)
1852 {
1853 if (cmd == SIOCSCCCHANINI)
1854 {
1855 if (!capable(CAP_NET_ADMIN)) return -EPERM;
1856 if (!arg) return -EINVAL;
1857
1858 scc->stat.bufsize = SCC_BUFSIZE;
1859
1860 if (copy_from_user(&scc->modem, arg, sizeof(struct scc_modem)))
1861 return -EINVAL;
1862
1863 /* default KISS Params */
1864
1865 if (scc->modem.speed < 4800)
1866 {
1867 scc->kiss.txdelay = 36; /* 360 ms */
1868 scc->kiss.persist = 42; /* 25% persistence */ /* was 25 */
1869 scc->kiss.slottime = 16; /* 160 ms */
1870 scc->kiss.tailtime = 4; /* minimal reasonable value */
1871 scc->kiss.fulldup = 0; /* CSMA */
1872 scc->kiss.waittime = 50; /* 500 ms */
1873 scc->kiss.maxkeyup = 10; /* 10 s */
1874 scc->kiss.mintime = 3; /* 3 s */
1875 scc->kiss.idletime = 30; /* 30 s */
1876 scc->kiss.maxdefer = 120; /* 2 min */
1877 scc->kiss.softdcd = 0; /* hardware dcd */
1878 } else {
1879 scc->kiss.txdelay = 10; /* 100 ms */
1880 scc->kiss.persist = 64; /* 25% persistence */ /* was 25 */
1881 scc->kiss.slottime = 8; /* 160 ms */
1882 scc->kiss.tailtime = 1; /* minimal reasonable value */
1883 scc->kiss.fulldup = 0; /* CSMA */
1884 scc->kiss.waittime = 50; /* 500 ms */
1885 scc->kiss.maxkeyup = 7; /* 7 s */
1886 scc->kiss.mintime = 3; /* 3 s */
1887 scc->kiss.idletime = 30; /* 30 s */
1888 scc->kiss.maxdefer = 120; /* 2 min */
1889 scc->kiss.softdcd = 0; /* hardware dcd */
1890 }
1891
1892 scc->tx_buff = NULL;
1893 skb_queue_head_init(&scc->tx_queue);
1894 scc->init = 1;
1895
1896 return 0;
1897 }
1898
1899 return -EINVAL;
1900 }
1901
1902 switch(cmd)
1903 {
1904 case SIOCSCCRESERVED:
1905 return -ENOIOCTLCMD;
1906
1907 case SIOCSCCSMEM:
1908 if (!capable(CAP_SYS_RAWIO)) return -EPERM;
1909 if (!arg || copy_from_user(&memcfg, arg, sizeof(memcfg)))
1910 return -EINVAL;
1911 scc->stat.bufsize = memcfg.bufsize;
1912 return 0;
1913
1914 case SIOCSCCGSTAT:
1915 if (!arg || copy_to_user(arg, &scc->stat, sizeof(scc->stat)))
1916 return -EINVAL;
1917 return 0;
1918
1919 case SIOCSCCGKISS:
1920 if (!arg || copy_from_user(&kiss_cmd, arg, sizeof(kiss_cmd)))
1921 return -EINVAL;
1922 kiss_cmd.param = scc_get_param(scc, kiss_cmd.command);
1923 if (copy_to_user(arg, &kiss_cmd, sizeof(kiss_cmd)))
1924 return -EINVAL;
1925 return 0;
1926
1927 case SIOCSCCSKISS:
1928 if (!capable(CAP_NET_ADMIN)) return -EPERM;
1929 if (!arg || copy_from_user(&kiss_cmd, arg, sizeof(kiss_cmd)))
1930 return -EINVAL;
1931 return scc_set_param(scc, kiss_cmd.command, kiss_cmd.param);
1932
1933 case SIOCSCCCAL:
1934 if (!capable(CAP_SYS_RAWIO)) return -EPERM;
1935 if (!arg || copy_from_user(&cal, arg, sizeof(cal)) || cal.time == 0)
1936 return -EINVAL;
1937
1938 scc_start_calibrate(scc, cal.time, cal.pattern);
1939 return 0;
1940
1941 default:
1942 return -ENOIOCTLCMD;
1943
1944 }
1945
1946 return -EINVAL;
1947 }
1948
1949 /* ----> set interface callsign <---- */
1950
scc_net_set_mac_address(struct net_device * dev,void * addr)1951 static int scc_net_set_mac_address(struct net_device *dev, void *addr)
1952 {
1953 struct sockaddr *sa = (struct sockaddr *) addr;
1954 dev_addr_set(dev, sa->sa_data);
1955 return 0;
1956 }
1957
1958 /* ----> get statistics <---- */
1959
scc_net_get_stats(struct net_device * dev)1960 static struct net_device_stats *scc_net_get_stats(struct net_device *dev)
1961 {
1962 struct scc_channel *scc = (struct scc_channel *) dev->ml_priv;
1963
1964 scc->dev_stat.rx_errors = scc->stat.rxerrs + scc->stat.rx_over;
1965 scc->dev_stat.tx_errors = scc->stat.txerrs + scc->stat.tx_under;
1966 scc->dev_stat.rx_fifo_errors = scc->stat.rx_over;
1967 scc->dev_stat.tx_fifo_errors = scc->stat.tx_under;
1968
1969 return &scc->dev_stat;
1970 }
1971
1972 /* ******************************************************************** */
1973 /* * dump statistics to /proc/net/z8530drv * */
1974 /* ******************************************************************** */
1975
1976 #ifdef CONFIG_PROC_FS
1977
scc_net_seq_idx(loff_t pos)1978 static inline struct scc_channel *scc_net_seq_idx(loff_t pos)
1979 {
1980 int k;
1981
1982 for (k = 0; k < Nchips*2; ++k) {
1983 if (!SCC_Info[k].init)
1984 continue;
1985 if (pos-- == 0)
1986 return &SCC_Info[k];
1987 }
1988 return NULL;
1989 }
1990
scc_net_seq_start(struct seq_file * seq,loff_t * pos)1991 static void *scc_net_seq_start(struct seq_file *seq, loff_t *pos)
1992 {
1993 return *pos ? scc_net_seq_idx(*pos - 1) : SEQ_START_TOKEN;
1994
1995 }
1996
scc_net_seq_next(struct seq_file * seq,void * v,loff_t * pos)1997 static void *scc_net_seq_next(struct seq_file *seq, void *v, loff_t *pos)
1998 {
1999 unsigned k;
2000 struct scc_channel *scc = v;
2001 ++*pos;
2002
2003 for (k = (v == SEQ_START_TOKEN) ? 0 : (scc - SCC_Info)+1;
2004 k < Nchips*2; ++k) {
2005 if (SCC_Info[k].init)
2006 return &SCC_Info[k];
2007 }
2008 return NULL;
2009 }
2010
scc_net_seq_stop(struct seq_file * seq,void * v)2011 static void scc_net_seq_stop(struct seq_file *seq, void *v)
2012 {
2013 }
2014
scc_net_seq_show(struct seq_file * seq,void * v)2015 static int scc_net_seq_show(struct seq_file *seq, void *v)
2016 {
2017 if (v == SEQ_START_TOKEN) {
2018 seq_puts(seq, "z8530drv-"VERSION"\n");
2019 } else if (!Driver_Initialized) {
2020 seq_puts(seq, "not initialized\n");
2021 } else if (!Nchips) {
2022 seq_puts(seq, "chips missing\n");
2023 } else {
2024 const struct scc_channel *scc = v;
2025 const struct scc_stat *stat = &scc->stat;
2026 const struct scc_kiss *kiss = &scc->kiss;
2027
2028
2029 /* dev data ctrl irq clock brand enh vector special option
2030 * baud nrz clocksrc softdcd bufsize
2031 * rxints txints exints spints
2032 * rcvd rxerrs over / xmit txerrs under / nospace bufsize
2033 * txd pers slot tail ful wait min maxk idl defr txof grp
2034 * W ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ##
2035 * R ## ## XX ## ## ## ## ## XX ## ## ## ## ## ## ##
2036 */
2037
2038 seq_printf(seq, "%s\t%3.3lx %3.3lx %d %lu %2.2x %d %3.3lx %3.3lx %d\n",
2039 scc->dev->name,
2040 scc->data, scc->ctrl, scc->irq, scc->clock, scc->brand,
2041 scc->enhanced, Vector_Latch, scc->special,
2042 scc->option);
2043 seq_printf(seq, "\t%lu %d %d %d %d\n",
2044 scc->modem.speed, scc->modem.nrz,
2045 scc->modem.clocksrc, kiss->softdcd,
2046 stat->bufsize);
2047 seq_printf(seq, "\t%lu %lu %lu %lu\n",
2048 stat->rxints, stat->txints, stat->exints, stat->spints);
2049 seq_printf(seq, "\t%lu %lu %d / %lu %lu %d / %d %d\n",
2050 stat->rxframes, stat->rxerrs, stat->rx_over,
2051 stat->txframes, stat->txerrs, stat->tx_under,
2052 stat->nospace, stat->tx_state);
2053
2054 #define K(x) kiss->x
2055 seq_printf(seq, "\t%d %d %d %d %d %d %d %d %d %d %d %d\n",
2056 K(txdelay), K(persist), K(slottime), K(tailtime),
2057 K(fulldup), K(waittime), K(mintime), K(maxkeyup),
2058 K(idletime), K(maxdefer), K(tx_inhibit), K(group));
2059 #undef K
2060 #ifdef SCC_DEBUG
2061 {
2062 int reg;
2063
2064 seq_printf(seq, "\tW ");
2065 for (reg = 0; reg < 16; reg++)
2066 seq_printf(seq, "%2.2x ", scc->wreg[reg]);
2067 seq_printf(seq, "\n");
2068
2069 seq_printf(seq, "\tR %2.2x %2.2x XX ", InReg(scc->ctrl,R0), InReg(scc->ctrl,R1));
2070 for (reg = 3; reg < 8; reg++)
2071 seq_printf(seq, "%2.2x ", InReg(scc->ctrl, reg));
2072 seq_printf(seq, "XX ");
2073 for (reg = 9; reg < 16; reg++)
2074 seq_printf(seq, "%2.2x ", InReg(scc->ctrl, reg));
2075 seq_printf(seq, "\n");
2076 }
2077 #endif
2078 seq_putc(seq, '\n');
2079 }
2080
2081 return 0;
2082 }
2083
2084 static const struct seq_operations scc_net_seq_ops = {
2085 .start = scc_net_seq_start,
2086 .next = scc_net_seq_next,
2087 .stop = scc_net_seq_stop,
2088 .show = scc_net_seq_show,
2089 };
2090 #endif /* CONFIG_PROC_FS */
2091
2092
2093 /* ******************************************************************** */
2094 /* * Init SCC driver * */
2095 /* ******************************************************************** */
2096
scc_init_driver(void)2097 static int __init scc_init_driver (void)
2098 {
2099 char devname[IFNAMSIZ];
2100
2101 printk(banner);
2102
2103 sprintf(devname,"%s0", SCC_DriverName);
2104
2105 rtnl_lock();
2106 if (scc_net_alloc(devname, SCC_Info)) {
2107 rtnl_unlock();
2108 printk(KERN_ERR "z8530drv: cannot initialize module\n");
2109 return -EIO;
2110 }
2111 rtnl_unlock();
2112
2113 proc_create_seq("z8530drv", 0, init_net.proc_net, &scc_net_seq_ops);
2114
2115 return 0;
2116 }
2117
scc_cleanup_driver(void)2118 static void __exit scc_cleanup_driver(void)
2119 {
2120 io_port ctrl;
2121 int k;
2122 struct scc_channel *scc;
2123 struct net_device *dev;
2124
2125 if (Nchips == 0 && (dev = SCC_Info[0].dev))
2126 {
2127 unregister_netdev(dev);
2128 free_netdev(dev);
2129 }
2130
2131 /* Guard against chip prattle */
2132 local_irq_disable();
2133
2134 for (k = 0; k < Nchips; k++)
2135 if ( (ctrl = SCC_ctrl[k].chan_A) )
2136 {
2137 Outb(ctrl, 0);
2138 OutReg(ctrl,R9,FHWRES); /* force hardware reset */
2139 udelay(50);
2140 }
2141
2142 /* To unload the port must be closed so no real IRQ pending */
2143 for (k = 0; k < nr_irqs ; k++)
2144 if (Ivec[k].used) free_irq(k, NULL);
2145
2146 local_irq_enable();
2147
2148 /* Now clean up */
2149 for (k = 0; k < Nchips*2; k++)
2150 {
2151 scc = &SCC_Info[k];
2152 if (scc->ctrl)
2153 {
2154 release_region(scc->ctrl, 1);
2155 release_region(scc->data, 1);
2156 }
2157 if (scc->dev)
2158 {
2159 unregister_netdev(scc->dev);
2160 free_netdev(scc->dev);
2161 }
2162 }
2163
2164
2165 if (Vector_Latch)
2166 release_region(Vector_Latch, 1);
2167
2168 remove_proc_entry("z8530drv", init_net.proc_net);
2169 }
2170
2171 MODULE_AUTHOR("Joerg Reuter <jreuter@yaina.de>");
2172 MODULE_DESCRIPTION("AX.25 Device Driver for Z8530 based HDLC cards");
2173 MODULE_LICENSE("GPL");
2174 module_init(scc_init_driver);
2175 module_exit(scc_cleanup_driver);
2176
