1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * Copyright © 2006-2009 Intel Corporation
4 *
5 * Authors:
6 * Eric Anholt <eric@anholt.net>
7 * Dave Airlie <airlied@linux.ie>
8 * Jesse Barnes <jesse.barnes@intel.com>
9 */
10
11 #include <linux/i2c.h>
12 #include <linux/pm_runtime.h>
13
14 #include <asm/intel-mid.h>
15
16 #include <drm/drm_edid.h>
17 #include <drm/drm_simple_kms_helper.h>
18
19 #include "intel_bios.h"
20 #include "power.h"
21 #include "psb_drv.h"
22 #include "psb_intel_drv.h"
23 #include "psb_intel_reg.h"
24
25 /* The max/min PWM frequency in BPCR[31:17] - */
26 /* The smallest number is 1 (not 0) that can fit in the
27 * 15-bit field of the and then*/
28 /* shifts to the left by one bit to get the actual 16-bit
29 * value that the 15-bits correspond to.*/
30 #define MRST_BLC_MAX_PWM_REG_FREQ 0xFFFF
31 #define BRIGHTNESS_MAX_LEVEL 100
32
33 /*
34 * Sets the power state for the panel.
35 */
oaktrail_lvds_set_power(struct drm_device * dev,struct gma_encoder * gma_encoder,bool on)36 static void oaktrail_lvds_set_power(struct drm_device *dev,
37 struct gma_encoder *gma_encoder,
38 bool on)
39 {
40 u32 pp_status;
41 struct drm_psb_private *dev_priv = to_drm_psb_private(dev);
42
43 if (!gma_power_begin(dev, true))
44 return;
45
46 if (on) {
47 REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) |
48 POWER_TARGET_ON);
49 do {
50 pp_status = REG_READ(PP_STATUS);
51 } while ((pp_status & (PP_ON | PP_READY)) == PP_READY);
52 dev_priv->is_lvds_on = true;
53 if (dev_priv->ops->lvds_bl_power)
54 dev_priv->ops->lvds_bl_power(dev, true);
55 } else {
56 if (dev_priv->ops->lvds_bl_power)
57 dev_priv->ops->lvds_bl_power(dev, false);
58 REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) &
59 ~POWER_TARGET_ON);
60 do {
61 pp_status = REG_READ(PP_STATUS);
62 } while (pp_status & PP_ON);
63 dev_priv->is_lvds_on = false;
64 }
65 gma_power_end(dev);
66 }
67
oaktrail_lvds_dpms(struct drm_encoder * encoder,int mode)68 static void oaktrail_lvds_dpms(struct drm_encoder *encoder, int mode)
69 {
70 struct drm_device *dev = encoder->dev;
71 struct gma_encoder *gma_encoder = to_gma_encoder(encoder);
72
73 if (mode == DRM_MODE_DPMS_ON)
74 oaktrail_lvds_set_power(dev, gma_encoder, true);
75 else
76 oaktrail_lvds_set_power(dev, gma_encoder, false);
77
78 /* XXX: We never power down the LVDS pairs. */
79 }
80
oaktrail_lvds_mode_set(struct drm_encoder * encoder,struct drm_display_mode * mode,struct drm_display_mode * adjusted_mode)81 static void oaktrail_lvds_mode_set(struct drm_encoder *encoder,
82 struct drm_display_mode *mode,
83 struct drm_display_mode *adjusted_mode)
84 {
85 struct drm_device *dev = encoder->dev;
86 struct drm_psb_private *dev_priv = to_drm_psb_private(dev);
87 struct psb_intel_mode_device *mode_dev = &dev_priv->mode_dev;
88 struct drm_connector_list_iter conn_iter;
89 struct drm_connector *connector = NULL;
90 struct drm_crtc *crtc = encoder->crtc;
91 u32 lvds_port;
92 uint64_t v = DRM_MODE_SCALE_FULLSCREEN;
93
94 if (!gma_power_begin(dev, true))
95 return;
96
97 /*
98 * The LVDS pin pair will already have been turned on in the
99 * psb_intel_crtc_mode_set since it has a large impact on the DPLL
100 * settings.
101 */
102 lvds_port = (REG_READ(LVDS) &
103 (~LVDS_PIPEB_SELECT)) |
104 LVDS_PORT_EN |
105 LVDS_BORDER_EN;
106
107 /* If the firmware says dither on Moorestown, or the BIOS does
108 on Oaktrail then enable dithering */
109 if (mode_dev->panel_wants_dither || dev_priv->lvds_dither)
110 lvds_port |= MRST_PANEL_8TO6_DITHER_ENABLE;
111
112 REG_WRITE(LVDS, lvds_port);
113
114 /* Find the connector we're trying to set up */
115 drm_connector_list_iter_begin(dev, &conn_iter);
116 drm_for_each_connector_iter(connector, &conn_iter) {
117 if (connector->encoder && connector->encoder->crtc == crtc)
118 break;
119 }
120
121 if (!connector) {
122 drm_connector_list_iter_end(&conn_iter);
123 DRM_ERROR("Couldn't find connector when setting mode");
124 gma_power_end(dev);
125 return;
126 }
127
128 drm_object_property_get_value( &connector->base,
129 dev->mode_config.scaling_mode_property, &v);
130 drm_connector_list_iter_end(&conn_iter);
131
132 if (v == DRM_MODE_SCALE_NO_SCALE)
133 REG_WRITE(PFIT_CONTROL, 0);
134 else if (v == DRM_MODE_SCALE_ASPECT) {
135 if ((mode->vdisplay != adjusted_mode->crtc_vdisplay) ||
136 (mode->hdisplay != adjusted_mode->crtc_hdisplay)) {
137 if ((adjusted_mode->crtc_hdisplay * mode->vdisplay) ==
138 (mode->hdisplay * adjusted_mode->crtc_vdisplay))
139 REG_WRITE(PFIT_CONTROL, PFIT_ENABLE);
140 else if ((adjusted_mode->crtc_hdisplay *
141 mode->vdisplay) > (mode->hdisplay *
142 adjusted_mode->crtc_vdisplay))
143 REG_WRITE(PFIT_CONTROL, PFIT_ENABLE |
144 PFIT_SCALING_MODE_PILLARBOX);
145 else
146 REG_WRITE(PFIT_CONTROL, PFIT_ENABLE |
147 PFIT_SCALING_MODE_LETTERBOX);
148 } else
149 REG_WRITE(PFIT_CONTROL, PFIT_ENABLE);
150 } else /*(v == DRM_MODE_SCALE_FULLSCREEN)*/
151 REG_WRITE(PFIT_CONTROL, PFIT_ENABLE);
152
153 gma_power_end(dev);
154 }
155
oaktrail_lvds_prepare(struct drm_encoder * encoder)156 static void oaktrail_lvds_prepare(struct drm_encoder *encoder)
157 {
158 struct drm_device *dev = encoder->dev;
159 struct drm_psb_private *dev_priv = to_drm_psb_private(dev);
160 struct gma_encoder *gma_encoder = to_gma_encoder(encoder);
161 struct psb_intel_mode_device *mode_dev = &dev_priv->mode_dev;
162
163 if (!gma_power_begin(dev, true))
164 return;
165
166 mode_dev->saveBLC_PWM_CTL = REG_READ(BLC_PWM_CTL);
167 mode_dev->backlight_duty_cycle = (mode_dev->saveBLC_PWM_CTL &
168 BACKLIGHT_DUTY_CYCLE_MASK);
169 oaktrail_lvds_set_power(dev, gma_encoder, false);
170 gma_power_end(dev);
171 }
172
oaktrail_lvds_get_max_backlight(struct drm_device * dev)173 static u32 oaktrail_lvds_get_max_backlight(struct drm_device *dev)
174 {
175 struct drm_psb_private *dev_priv = to_drm_psb_private(dev);
176 u32 ret;
177
178 if (gma_power_begin(dev, false)) {
179 ret = ((REG_READ(BLC_PWM_CTL) &
180 BACKLIGHT_MODULATION_FREQ_MASK) >>
181 BACKLIGHT_MODULATION_FREQ_SHIFT) * 2;
182
183 gma_power_end(dev);
184 } else
185 ret = ((dev_priv->regs.saveBLC_PWM_CTL &
186 BACKLIGHT_MODULATION_FREQ_MASK) >>
187 BACKLIGHT_MODULATION_FREQ_SHIFT) * 2;
188
189 return ret;
190 }
191
oaktrail_lvds_commit(struct drm_encoder * encoder)192 static void oaktrail_lvds_commit(struct drm_encoder *encoder)
193 {
194 struct drm_device *dev = encoder->dev;
195 struct drm_psb_private *dev_priv = to_drm_psb_private(dev);
196 struct gma_encoder *gma_encoder = to_gma_encoder(encoder);
197 struct psb_intel_mode_device *mode_dev = &dev_priv->mode_dev;
198
199 if (mode_dev->backlight_duty_cycle == 0)
200 mode_dev->backlight_duty_cycle =
201 oaktrail_lvds_get_max_backlight(dev);
202 oaktrail_lvds_set_power(dev, gma_encoder, true);
203 }
204
205 static const struct drm_encoder_helper_funcs oaktrail_lvds_helper_funcs = {
206 .dpms = oaktrail_lvds_dpms,
207 .mode_fixup = psb_intel_lvds_mode_fixup,
208 .prepare = oaktrail_lvds_prepare,
209 .mode_set = oaktrail_lvds_mode_set,
210 .commit = oaktrail_lvds_commit,
211 };
212
213 /* Returns the panel fixed mode from configuration. */
214
oaktrail_lvds_get_configuration_mode(struct drm_device * dev,struct psb_intel_mode_device * mode_dev)215 static void oaktrail_lvds_get_configuration_mode(struct drm_device *dev,
216 struct psb_intel_mode_device *mode_dev)
217 {
218 struct drm_display_mode *mode = NULL;
219 struct drm_psb_private *dev_priv = to_drm_psb_private(dev);
220 struct oaktrail_timing_info *ti = &dev_priv->gct_data.DTD;
221
222 mode_dev->panel_fixed_mode = NULL;
223
224 /* Use the firmware provided data on Moorestown */
225 if (dev_priv->has_gct) {
226 mode = kzalloc(sizeof(*mode), GFP_KERNEL);
227 if (!mode)
228 return;
229
230 mode->hdisplay = (ti->hactive_hi << 8) | ti->hactive_lo;
231 mode->vdisplay = (ti->vactive_hi << 8) | ti->vactive_lo;
232 mode->hsync_start = mode->hdisplay + \
233 ((ti->hsync_offset_hi << 8) | \
234 ti->hsync_offset_lo);
235 mode->hsync_end = mode->hsync_start + \
236 ((ti->hsync_pulse_width_hi << 8) | \
237 ti->hsync_pulse_width_lo);
238 mode->htotal = mode->hdisplay + ((ti->hblank_hi << 8) | \
239 ti->hblank_lo);
240 mode->vsync_start = \
241 mode->vdisplay + ((ti->vsync_offset_hi << 4) | \
242 ti->vsync_offset_lo);
243 mode->vsync_end = \
244 mode->vsync_start + ((ti->vsync_pulse_width_hi << 4) | \
245 ti->vsync_pulse_width_lo);
246 mode->vtotal = mode->vdisplay + \
247 ((ti->vblank_hi << 8) | ti->vblank_lo);
248 mode->clock = ti->pixel_clock * 10;
249 #if 0
250 pr_info("hdisplay is %d\n", mode->hdisplay);
251 pr_info("vdisplay is %d\n", mode->vdisplay);
252 pr_info("HSS is %d\n", mode->hsync_start);
253 pr_info("HSE is %d\n", mode->hsync_end);
254 pr_info("htotal is %d\n", mode->htotal);
255 pr_info("VSS is %d\n", mode->vsync_start);
256 pr_info("VSE is %d\n", mode->vsync_end);
257 pr_info("vtotal is %d\n", mode->vtotal);
258 pr_info("clock is %d\n", mode->clock);
259 #endif
260 mode_dev->panel_fixed_mode = mode;
261 }
262
263 /* Use the BIOS VBT mode if available */
264 if (mode_dev->panel_fixed_mode == NULL && mode_dev->vbt_mode)
265 mode_dev->panel_fixed_mode = drm_mode_duplicate(dev,
266 mode_dev->vbt_mode);
267
268 /* Then try the LVDS VBT mode */
269 if (mode_dev->panel_fixed_mode == NULL)
270 if (dev_priv->lfp_lvds_vbt_mode)
271 mode_dev->panel_fixed_mode =
272 drm_mode_duplicate(dev,
273 dev_priv->lfp_lvds_vbt_mode);
274
275 /* If we still got no mode then bail */
276 if (mode_dev->panel_fixed_mode == NULL)
277 return;
278
279 drm_mode_set_name(mode_dev->panel_fixed_mode);
280 drm_mode_set_crtcinfo(mode_dev->panel_fixed_mode, 0);
281 }
282
283 /**
284 * oaktrail_lvds_init - setup LVDS connectors on this device
285 * @dev: drm device
286 * @mode_dev: PSB mode device
287 *
288 * Create the connector, register the LVDS DDC bus, and try to figure out what
289 * modes we can display on the LVDS panel (if present).
290 */
oaktrail_lvds_init(struct drm_device * dev,struct psb_intel_mode_device * mode_dev)291 void oaktrail_lvds_init(struct drm_device *dev,
292 struct psb_intel_mode_device *mode_dev)
293 {
294 struct gma_encoder *gma_encoder;
295 struct gma_connector *gma_connector;
296 struct gma_i2c_chan *ddc_bus;
297 struct drm_connector *connector;
298 struct drm_encoder *encoder;
299 struct drm_psb_private *dev_priv = to_drm_psb_private(dev);
300 struct edid *edid;
301 struct i2c_adapter *i2c_adap;
302 struct drm_display_mode *scan; /* *modes, *bios_mode; */
303 int ret;
304
305 gma_encoder = kzalloc(sizeof(struct gma_encoder), GFP_KERNEL);
306 if (!gma_encoder)
307 return;
308
309 gma_connector = kzalloc(sizeof(struct gma_connector), GFP_KERNEL);
310 if (!gma_connector)
311 goto err_free_encoder;
312
313 connector = &gma_connector->base;
314 encoder = &gma_encoder->base;
315 dev_priv->is_lvds_on = true;
316 ret = drm_connector_init(dev, connector,
317 &psb_intel_lvds_connector_funcs,
318 DRM_MODE_CONNECTOR_LVDS);
319 if (ret)
320 goto err_free_connector;
321
322 ret = drm_simple_encoder_init(dev, encoder, DRM_MODE_ENCODER_LVDS);
323 if (ret)
324 goto err_connector_cleanup;
325
326 gma_connector_attach_encoder(gma_connector, gma_encoder);
327 gma_encoder->type = INTEL_OUTPUT_LVDS;
328
329 drm_encoder_helper_add(encoder, &oaktrail_lvds_helper_funcs);
330 drm_connector_helper_add(connector,
331 &psb_intel_lvds_connector_helper_funcs);
332 connector->display_info.subpixel_order = SubPixelHorizontalRGB;
333 connector->interlace_allowed = false;
334 connector->doublescan_allowed = false;
335
336 drm_object_attach_property(&connector->base,
337 dev->mode_config.scaling_mode_property,
338 DRM_MODE_SCALE_FULLSCREEN);
339 drm_object_attach_property(&connector->base,
340 dev_priv->backlight_property,
341 BRIGHTNESS_MAX_LEVEL);
342
343 mode_dev->panel_wants_dither = false;
344 if (dev_priv->has_gct)
345 mode_dev->panel_wants_dither = (dev_priv->gct_data.
346 Panel_Port_Control & MRST_PANEL_8TO6_DITHER_ENABLE);
347 if (dev_priv->lvds_dither)
348 mode_dev->panel_wants_dither = 1;
349
350 /*
351 * LVDS discovery:
352 * 1) check for EDID on DDC
353 * 2) check for VBT data
354 * 3) check to see if LVDS is already on
355 * if none of the above, no panel
356 * 4) make sure lid is open
357 * if closed, act like it's not there for now
358 */
359
360 edid = NULL;
361 mutex_lock(&dev->mode_config.mutex);
362
363 i2c_adap = i2c_get_adapter(dev_priv->ops->i2c_bus);
364 if (i2c_adap)
365 edid = drm_get_edid(connector, i2c_adap);
366
367 if (edid == NULL && dev_priv->lpc_gpio_base) {
368 ddc_bus = oaktrail_lvds_i2c_init(dev);
369 if (!IS_ERR(ddc_bus)) {
370 i2c_adap = &ddc_bus->base;
371 edid = drm_get_edid(connector, i2c_adap);
372 }
373 }
374
375 /*
376 * Due to the logic in probing for i2c buses above we do not know the
377 * i2c_adap until now. Hence we cannot use drm_connector_init_with_ddc()
378 * but must instead set connector->ddc manually here.
379 */
380 connector->ddc = i2c_adap;
381
382 /*
383 * Attempt to get the fixed panel mode from DDC. Assume that the
384 * preferred mode is the right one.
385 */
386 if (edid) {
387 drm_connector_update_edid_property(connector, edid);
388 drm_add_edid_modes(connector, edid);
389 kfree(edid);
390
391 list_for_each_entry(scan, &connector->probed_modes, head) {
392 if (scan->type & DRM_MODE_TYPE_PREFERRED) {
393 mode_dev->panel_fixed_mode =
394 drm_mode_duplicate(dev, scan);
395 goto out; /* FIXME: check for quirks */
396 }
397 }
398 } else
399 dev_err(dev->dev, "No ddc adapter available!\n");
400 /*
401 * If we didn't get EDID, try geting panel timing
402 * from configuration data
403 */
404 oaktrail_lvds_get_configuration_mode(dev, mode_dev);
405
406 if (mode_dev->panel_fixed_mode) {
407 mode_dev->panel_fixed_mode->type |= DRM_MODE_TYPE_PREFERRED;
408 goto out; /* FIXME: check for quirks */
409 }
410
411 /* If we still don't have a mode after all that, give up. */
412 if (!mode_dev->panel_fixed_mode) {
413 dev_err(dev->dev, "Found no modes on the lvds, ignoring the LVDS\n");
414 goto err_unlock;
415 }
416
417 out:
418 mutex_unlock(&dev->mode_config.mutex);
419
420 return;
421
422 err_unlock:
423 mutex_unlock(&dev->mode_config.mutex);
424 gma_i2c_destroy(to_gma_i2c_chan(connector->ddc));
425 drm_encoder_cleanup(encoder);
426 err_connector_cleanup:
427 drm_connector_cleanup(connector);
428 err_free_connector:
429 kfree(gma_connector);
430 err_free_encoder:
431 kfree(gma_encoder);
432 }
433
434
