1 /*-*-linux-c-*-*/
2
3 /*
4 Copyright (C) 2008 Cezary Jackiewicz <cezary.jackiewicz (at) gmail.com>
5
6 based on MSI driver
7
8 Copyright (C) 2006 Lennart Poettering <mzxreary (at) 0pointer (dot) de>
9
10 This program is free software; you can redistribute it and/or modify
11 it under the terms of the GNU General Public License as published by
12 the Free Software Foundation; either version 2 of the License, or
13 (at your option) any later version.
14
15 This program is distributed in the hope that it will be useful, but
16 WITHOUT ANY WARRANTY; without even the implied warranty of
17 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
18 General Public License for more details.
19
20 You should have received a copy of the GNU General Public License
21 along with this program; if not, write to the Free Software
22 Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
23 02110-1301, USA.
24 */
25
26 /*
27 * compal-laptop.c - Compal laptop support.
28 *
29 * This driver exports a few files in /sys/devices/platform/compal-laptop/:
30 * wake_up_XXX Whether or not we listen to such wake up events (rw)
31 *
32 * In addition to these platform device attributes the driver
33 * registers itself in the Linux backlight control, power_supply, rfkill
34 * and hwmon subsystem and is available to userspace under:
35 *
36 * /sys/class/backlight/compal-laptop/
37 * /sys/class/power_supply/compal-laptop/
38 * /sys/class/rfkill/rfkillX/
39 * /sys/class/hwmon/hwmonX/
40 *
41 * Notes on the power_supply battery interface:
42 * - the "minimum" design voltage is *the* design voltage
43 * - the ambient temperature is the average battery temperature
44 * and the value is an educated guess (see commented code below)
45 *
46 *
47 * This driver might work on other laptops produced by Compal. If you
48 * want to try it you can pass force=1 as argument to the module which
49 * will force it to load even when the DMI data doesn't identify the
50 * laptop as compatible.
51 *
52 * Lots of data available at:
53 * http://service1.marasst.com/Compal/JHL90_91/Service%20Manual/
54 * JHL90%20service%20manual-Final-0725.pdf
55 *
56 *
57 *
58 * Support for the Compal JHL90 added by Roald Frederickx
59 * (roald.frederickx@gmail.com):
60 * Driver got large revision. Added functionalities: backlight
61 * power, wake_on_XXX, a hwmon and power_supply interface.
62 *
63 * In case this gets merged into the kernel source: I want to dedicate this
64 * to Kasper Meerts, the awesome guy who showed me Linux and C!
65 */
66
67 /* NOTE: currently the wake_on_XXX, hwmon and power_supply interfaces are
68 * only enabled on a JHL90 board until it is verified that they work on the
69 * other boards too. See the extra_features variable. */
70
71 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
72
73 #include <linux/module.h>
74 #include <linux/kernel.h>
75 #include <linux/init.h>
76 #include <linux/acpi.h>
77 #include <linux/dmi.h>
78 #include <linux/backlight.h>
79 #include <linux/platform_device.h>
80 #include <linux/rfkill.h>
81 #include <linux/hwmon.h>
82 #include <linux/hwmon-sysfs.h>
83 #include <linux/power_supply.h>
84 #include <linux/fb.h>
85 #include <acpi/video.h>
86
87 /* ======= */
88 /* Defines */
89 /* ======= */
90 #define DRIVER_NAME "compal-laptop"
91 #define DRIVER_VERSION "0.2.7"
92
93 #define BACKLIGHT_LEVEL_ADDR 0xB9
94 #define BACKLIGHT_LEVEL_MAX 7
95 #define BACKLIGHT_STATE_ADDR 0x59
96 #define BACKLIGHT_STATE_ON_DATA 0xE1
97 #define BACKLIGHT_STATE_OFF_DATA 0xE2
98
99 #define WAKE_UP_ADDR 0xA4
100 #define WAKE_UP_PME (1 << 0)
101 #define WAKE_UP_MODEM (1 << 1)
102 #define WAKE_UP_LAN (1 << 2)
103 #define WAKE_UP_WLAN (1 << 4)
104 #define WAKE_UP_KEY (1 << 6)
105 #define WAKE_UP_MOUSE (1 << 7)
106
107 #define WIRELESS_ADDR 0xBB
108 #define WIRELESS_WLAN (1 << 0)
109 #define WIRELESS_BT (1 << 1)
110 #define WIRELESS_WLAN_EXISTS (1 << 2)
111 #define WIRELESS_BT_EXISTS (1 << 3)
112 #define WIRELESS_KILLSWITCH (1 << 4)
113
114 #define PWM_ADDRESS 0x46
115 #define PWM_DISABLE_ADDR 0x59
116 #define PWM_DISABLE_DATA 0xA5
117 #define PWM_ENABLE_ADDR 0x59
118 #define PWM_ENABLE_DATA 0xA8
119
120 #define FAN_ADDRESS 0x46
121 #define FAN_DATA 0x81
122 #define FAN_FULL_ON_CMD 0x59 /* Doesn't seem to work. Just */
123 #define FAN_FULL_ON_ENABLE 0x76 /* force the pwm signal to its */
124 #define FAN_FULL_ON_DISABLE 0x77 /* maximum value instead */
125
126 #define TEMP_CPU 0xB0
127 #define TEMP_CPU_LOCAL 0xB1
128 #define TEMP_CPU_DTS 0xB5
129 #define TEMP_NORTHBRIDGE 0xB6
130 #define TEMP_VGA 0xB4
131 #define TEMP_SKIN 0xB2
132
133 #define BAT_MANUFACTURER_NAME_ADDR 0x10
134 #define BAT_MANUFACTURER_NAME_LEN 9
135 #define BAT_MODEL_NAME_ADDR 0x19
136 #define BAT_MODEL_NAME_LEN 6
137 #define BAT_SERIAL_NUMBER_ADDR 0xC4
138 #define BAT_SERIAL_NUMBER_LEN 5
139 #define BAT_CHARGE_NOW 0xC2
140 #define BAT_CHARGE_DESIGN 0xCA
141 #define BAT_VOLTAGE_NOW 0xC6
142 #define BAT_VOLTAGE_DESIGN 0xC8
143 #define BAT_CURRENT_NOW 0xD0
144 #define BAT_CURRENT_AVG 0xD2
145 #define BAT_POWER 0xD4
146 #define BAT_CAPACITY 0xCE
147 #define BAT_TEMP 0xD6
148 #define BAT_TEMP_AVG 0xD7
149 #define BAT_STATUS0 0xC1
150 #define BAT_STATUS1 0xF0
151 #define BAT_STATUS2 0xF1
152 #define BAT_STOP_CHARGE1 0xF2
153 #define BAT_STOP_CHARGE2 0xF3
154 #define BAT_CHARGE_LIMIT 0x03
155 #define BAT_CHARGE_LIMIT_MAX 100
156
157 #define BAT_S0_DISCHARGE (1 << 0)
158 #define BAT_S0_DISCHRG_CRITICAL (1 << 2)
159 #define BAT_S0_LOW (1 << 3)
160 #define BAT_S0_CHARGING (1 << 1)
161 #define BAT_S0_AC (1 << 7)
162 #define BAT_S1_EXISTS (1 << 0)
163 #define BAT_S1_FULL (1 << 1)
164 #define BAT_S1_EMPTY (1 << 2)
165 #define BAT_S1_LiION_OR_NiMH (1 << 7)
166 #define BAT_S2_LOW_LOW (1 << 0)
167 #define BAT_STOP_CHRG1_BAD_CELL (1 << 1)
168 #define BAT_STOP_CHRG1_COMM_FAIL (1 << 2)
169 #define BAT_STOP_CHRG1_OVERVOLTAGE (1 << 6)
170 #define BAT_STOP_CHRG1_OVERTEMPERATURE (1 << 7)
171
172
173 /* ======= */
174 /* Structs */
175 /* ======= */
176 struct compal_data{
177 /* Fan control */
178 int pwm_enable; /* 0:full on, 1:set by pwm1, 2:control by motherboard */
179 unsigned char curr_pwm;
180
181 /* Power supply */
182 struct power_supply *psy;
183 struct power_supply_info psy_info;
184 char bat_model_name[BAT_MODEL_NAME_LEN + 1];
185 char bat_manufacturer_name[BAT_MANUFACTURER_NAME_LEN + 1];
186 char bat_serial_number[BAT_SERIAL_NUMBER_LEN + 1];
187 };
188
189
190 /* =============== */
191 /* General globals */
192 /* =============== */
193 static bool force;
194 module_param(force, bool, 0);
195 MODULE_PARM_DESC(force, "Force driver load, ignore DMI data");
196
197 /* Support for the wake_on_XXX, hwmon and power_supply interface. Currently
198 * only gets enabled on a JHL90 board. Might work with the others too */
199 static bool extra_features;
200
201 /* Nasty stuff. For some reason the fan control is very un-linear. I've
202 * come up with these values by looping through the possible inputs and
203 * watching the output of address 0x4F (do an ec_transaction writing 0x33
204 * into 0x4F and read a few bytes from the output, like so:
205 * u8 writeData = 0x33;
206 * ec_transaction(0x4F, &writeData, 1, buffer, 32);
207 * That address is labeled "fan1 table information" in the service manual.
208 * It should be clear which value in 'buffer' changes). This seems to be
209 * related to fan speed. It isn't a proper 'realtime' fan speed value
210 * though, because physically stopping or speeding up the fan doesn't
211 * change it. It might be the average voltage or current of the pwm output.
212 * Nevertheless, it is more fine-grained than the actual RPM reading */
213 static const unsigned char pwm_lookup_table[256] = {
214 0, 0, 0, 1, 1, 1, 2, 253, 254, 3, 3, 3, 4, 4, 4, 5, 5, 5, 6, 6, 6,
215 7, 7, 7, 8, 86, 86, 9, 9, 9, 10, 10, 10, 11, 92, 92, 12, 12, 95,
216 13, 66, 66, 14, 14, 98, 15, 15, 15, 16, 16, 67, 17, 17, 72, 18, 70,
217 75, 19, 90, 90, 73, 73, 73, 21, 21, 91, 91, 91, 96, 23, 94, 94, 94,
218 94, 94, 94, 94, 94, 94, 94, 141, 141, 238, 223, 192, 139, 139, 139,
219 139, 139, 142, 142, 142, 142, 142, 78, 78, 78, 78, 78, 76, 76, 76,
220 76, 76, 79, 79, 79, 79, 79, 79, 79, 20, 20, 20, 20, 20, 22, 22, 22,
221 22, 22, 24, 24, 24, 24, 24, 24, 219, 219, 219, 219, 219, 219, 219,
222 219, 27, 27, 188, 188, 28, 28, 28, 29, 186, 186, 186, 186, 186,
223 186, 186, 186, 186, 186, 31, 31, 31, 31, 31, 32, 32, 32, 41, 33,
224 33, 33, 33, 33, 252, 252, 34, 34, 34, 43, 35, 35, 35, 36, 36, 38,
225 206, 206, 206, 206, 206, 206, 206, 206, 206, 37, 37, 37, 46, 46,
226 47, 47, 232, 232, 232, 232, 232, 232, 232, 232, 232, 232, 48, 48,
227 48, 48, 48, 40, 40, 40, 49, 42, 42, 42, 42, 42, 42, 42, 42, 44,
228 189, 189, 189, 189, 54, 54, 45, 45, 45, 45, 45, 45, 45, 45, 251,
229 191, 199, 199, 199, 199, 199, 215, 215, 215, 215, 187, 187, 187,
230 187, 187, 193, 50
231 };
232
233
234
235
236 /* ========================= */
237 /* Hardware access functions */
238 /* ========================= */
239 /* General access */
ec_read_u8(u8 addr)240 static u8 ec_read_u8(u8 addr)
241 {
242 u8 value;
243 ec_read(addr, &value);
244 return value;
245 }
246
ec_read_s8(u8 addr)247 static s8 ec_read_s8(u8 addr)
248 {
249 return (s8)ec_read_u8(addr);
250 }
251
ec_read_u16(u8 addr)252 static u16 ec_read_u16(u8 addr)
253 {
254 int hi, lo;
255 lo = ec_read_u8(addr);
256 hi = ec_read_u8(addr + 1);
257 return (hi << 8) + lo;
258 }
259
ec_read_s16(u8 addr)260 static s16 ec_read_s16(u8 addr)
261 {
262 return (s16) ec_read_u16(addr);
263 }
264
ec_read_sequence(u8 addr,u8 * buf,int len)265 static void ec_read_sequence(u8 addr, u8 *buf, int len)
266 {
267 int i;
268 for (i = 0; i < len; i++)
269 ec_read(addr + i, buf + i);
270 }
271
272
273 /* Backlight access */
set_backlight_level(int level)274 static int set_backlight_level(int level)
275 {
276 if (level < 0 || level > BACKLIGHT_LEVEL_MAX)
277 return -EINVAL;
278
279 ec_write(BACKLIGHT_LEVEL_ADDR, level);
280
281 return 0;
282 }
283
get_backlight_level(void)284 static int get_backlight_level(void)
285 {
286 return (int) ec_read_u8(BACKLIGHT_LEVEL_ADDR);
287 }
288
set_backlight_state(bool on)289 static void set_backlight_state(bool on)
290 {
291 u8 data = on ? BACKLIGHT_STATE_ON_DATA : BACKLIGHT_STATE_OFF_DATA;
292 ec_transaction(BACKLIGHT_STATE_ADDR, &data, 1, NULL, 0);
293 }
294
295
296 /* Fan control access */
pwm_enable_control(void)297 static void pwm_enable_control(void)
298 {
299 unsigned char writeData = PWM_ENABLE_DATA;
300 ec_transaction(PWM_ENABLE_ADDR, &writeData, 1, NULL, 0);
301 }
302
pwm_disable_control(void)303 static void pwm_disable_control(void)
304 {
305 unsigned char writeData = PWM_DISABLE_DATA;
306 ec_transaction(PWM_DISABLE_ADDR, &writeData, 1, NULL, 0);
307 }
308
set_pwm(int pwm)309 static void set_pwm(int pwm)
310 {
311 ec_transaction(PWM_ADDRESS, &pwm_lookup_table[pwm], 1, NULL, 0);
312 }
313
get_fan_rpm(void)314 static int get_fan_rpm(void)
315 {
316 u8 value, data = FAN_DATA;
317 ec_transaction(FAN_ADDRESS, &data, 1, &value, 1);
318 return 100 * (int)value;
319 }
320
321
322
323
324 /* =================== */
325 /* Interface functions */
326 /* =================== */
327
328 /* Backlight interface */
bl_get_brightness(struct backlight_device * b)329 static int bl_get_brightness(struct backlight_device *b)
330 {
331 return get_backlight_level();
332 }
333
bl_update_status(struct backlight_device * b)334 static int bl_update_status(struct backlight_device *b)
335 {
336 int ret = set_backlight_level(b->props.brightness);
337 if (ret)
338 return ret;
339
340 set_backlight_state((b->props.power == FB_BLANK_UNBLANK)
341 && !(b->props.state & BL_CORE_SUSPENDED)
342 && !(b->props.state & BL_CORE_FBBLANK));
343 return 0;
344 }
345
346 static const struct backlight_ops compalbl_ops = {
347 .get_brightness = bl_get_brightness,
348 .update_status = bl_update_status,
349 };
350
351
352 /* Wireless interface */
compal_rfkill_set(void * data,bool blocked)353 static int compal_rfkill_set(void *data, bool blocked)
354 {
355 unsigned long radio = (unsigned long) data;
356 u8 result = ec_read_u8(WIRELESS_ADDR);
357 u8 value;
358
359 if (!blocked)
360 value = (u8) (result | radio);
361 else
362 value = (u8) (result & ~radio);
363 ec_write(WIRELESS_ADDR, value);
364
365 return 0;
366 }
367
compal_rfkill_poll(struct rfkill * rfkill,void * data)368 static void compal_rfkill_poll(struct rfkill *rfkill, void *data)
369 {
370 u8 result = ec_read_u8(WIRELESS_ADDR);
371 bool hw_blocked = !(result & WIRELESS_KILLSWITCH);
372 rfkill_set_hw_state(rfkill, hw_blocked);
373 }
374
375 static const struct rfkill_ops compal_rfkill_ops = {
376 .poll = compal_rfkill_poll,
377 .set_block = compal_rfkill_set,
378 };
379
380
381 /* Wake_up interface */
382 #define SIMPLE_MASKED_STORE_SHOW(NAME, ADDR, MASK) \
383 static ssize_t NAME##_show(struct device *dev, \
384 struct device_attribute *attr, char *buf) \
385 { \
386 return sprintf(buf, "%d\n", ((ec_read_u8(ADDR) & MASK) != 0)); \
387 } \
388 static ssize_t NAME##_store(struct device *dev, \
389 struct device_attribute *attr, const char *buf, size_t count) \
390 { \
391 int state; \
392 u8 old_val = ec_read_u8(ADDR); \
393 if (sscanf(buf, "%d", &state) != 1 || (state < 0 || state > 1)) \
394 return -EINVAL; \
395 ec_write(ADDR, state ? (old_val | MASK) : (old_val & ~MASK)); \
396 return count; \
397 }
398
SIMPLE_MASKED_STORE_SHOW(wake_up_pme,WAKE_UP_ADDR,WAKE_UP_PME)399 SIMPLE_MASKED_STORE_SHOW(wake_up_pme, WAKE_UP_ADDR, WAKE_UP_PME)
400 SIMPLE_MASKED_STORE_SHOW(wake_up_modem, WAKE_UP_ADDR, WAKE_UP_MODEM)
401 SIMPLE_MASKED_STORE_SHOW(wake_up_lan, WAKE_UP_ADDR, WAKE_UP_LAN)
402 SIMPLE_MASKED_STORE_SHOW(wake_up_wlan, WAKE_UP_ADDR, WAKE_UP_WLAN)
403 SIMPLE_MASKED_STORE_SHOW(wake_up_key, WAKE_UP_ADDR, WAKE_UP_KEY)
404 SIMPLE_MASKED_STORE_SHOW(wake_up_mouse, WAKE_UP_ADDR, WAKE_UP_MOUSE)
405
406 /* Fan control interface */
407 static ssize_t pwm_enable_show(struct device *dev,
408 struct device_attribute *attr, char *buf)
409 {
410 struct compal_data *data = dev_get_drvdata(dev);
411 return sprintf(buf, "%d\n", data->pwm_enable);
412 }
413
pwm_enable_store(struct device * dev,struct device_attribute * attr,const char * buf,size_t count)414 static ssize_t pwm_enable_store(struct device *dev,
415 struct device_attribute *attr, const char *buf, size_t count)
416 {
417 struct compal_data *data = dev_get_drvdata(dev);
418 long val;
419 int err;
420
421 err = kstrtol(buf, 10, &val);
422 if (err)
423 return err;
424 if (val < 0)
425 return -EINVAL;
426
427 data->pwm_enable = val;
428
429 switch (val) {
430 case 0: /* Full speed */
431 pwm_enable_control();
432 set_pwm(255);
433 break;
434 case 1: /* As set by pwm1 */
435 pwm_enable_control();
436 set_pwm(data->curr_pwm);
437 break;
438 default: /* Control by motherboard */
439 pwm_disable_control();
440 break;
441 }
442
443 return count;
444 }
445
pwm_show(struct device * dev,struct device_attribute * attr,char * buf)446 static ssize_t pwm_show(struct device *dev, struct device_attribute *attr,
447 char *buf)
448 {
449 struct compal_data *data = dev_get_drvdata(dev);
450 return sprintf(buf, "%hhu\n", data->curr_pwm);
451 }
452
pwm_store(struct device * dev,struct device_attribute * attr,const char * buf,size_t count)453 static ssize_t pwm_store(struct device *dev, struct device_attribute *attr,
454 const char *buf, size_t count)
455 {
456 struct compal_data *data = dev_get_drvdata(dev);
457 long val;
458 int err;
459
460 err = kstrtol(buf, 10, &val);
461 if (err)
462 return err;
463 if (val < 0 || val > 255)
464 return -EINVAL;
465
466 data->curr_pwm = val;
467
468 if (data->pwm_enable != 1)
469 return count;
470 set_pwm(val);
471
472 return count;
473 }
474
fan_show(struct device * dev,struct device_attribute * attr,char * buf)475 static ssize_t fan_show(struct device *dev, struct device_attribute *attr,
476 char *buf)
477 {
478 return sprintf(buf, "%d\n", get_fan_rpm());
479 }
480
481
482 /* Temperature interface */
483 #define TEMPERATURE_SHOW_TEMP_AND_LABEL(POSTFIX, ADDRESS, LABEL) \
484 static ssize_t temp_##POSTFIX(struct device *dev, \
485 struct device_attribute *attr, char *buf) \
486 { \
487 return sprintf(buf, "%d\n", 1000 * (int)ec_read_s8(ADDRESS)); \
488 } \
489 static ssize_t label_##POSTFIX(struct device *dev, \
490 struct device_attribute *attr, char *buf) \
491 { \
492 return sprintf(buf, "%s\n", LABEL); \
493 }
494
495 /* Labels as in service guide */
496 TEMPERATURE_SHOW_TEMP_AND_LABEL(cpu, TEMP_CPU, "CPU_TEMP");
497 TEMPERATURE_SHOW_TEMP_AND_LABEL(cpu_local, TEMP_CPU_LOCAL, "CPU_TEMP_LOCAL");
498 TEMPERATURE_SHOW_TEMP_AND_LABEL(cpu_DTS, TEMP_CPU_DTS, "CPU_DTS");
499 TEMPERATURE_SHOW_TEMP_AND_LABEL(northbridge,TEMP_NORTHBRIDGE,"NorthBridge");
500 TEMPERATURE_SHOW_TEMP_AND_LABEL(vga, TEMP_VGA, "VGA_TEMP");
501 TEMPERATURE_SHOW_TEMP_AND_LABEL(SKIN, TEMP_SKIN, "SKIN_TEMP90");
502
503
504 /* Power supply interface */
bat_status(void)505 static int bat_status(void)
506 {
507 u8 status0 = ec_read_u8(BAT_STATUS0);
508 u8 status1 = ec_read_u8(BAT_STATUS1);
509
510 if (status0 & BAT_S0_CHARGING)
511 return POWER_SUPPLY_STATUS_CHARGING;
512 if (status0 & BAT_S0_DISCHARGE)
513 return POWER_SUPPLY_STATUS_DISCHARGING;
514 if (status1 & BAT_S1_FULL)
515 return POWER_SUPPLY_STATUS_FULL;
516 return POWER_SUPPLY_STATUS_NOT_CHARGING;
517 }
518
bat_health(void)519 static int bat_health(void)
520 {
521 u8 status = ec_read_u8(BAT_STOP_CHARGE1);
522
523 if (status & BAT_STOP_CHRG1_OVERTEMPERATURE)
524 return POWER_SUPPLY_HEALTH_OVERHEAT;
525 if (status & BAT_STOP_CHRG1_OVERVOLTAGE)
526 return POWER_SUPPLY_HEALTH_OVERVOLTAGE;
527 if (status & BAT_STOP_CHRG1_BAD_CELL)
528 return POWER_SUPPLY_HEALTH_DEAD;
529 if (status & BAT_STOP_CHRG1_COMM_FAIL)
530 return POWER_SUPPLY_HEALTH_UNKNOWN;
531 return POWER_SUPPLY_HEALTH_GOOD;
532 }
533
bat_is_present(void)534 static int bat_is_present(void)
535 {
536 u8 status = ec_read_u8(BAT_STATUS2);
537 return ((status & BAT_S1_EXISTS) != 0);
538 }
539
bat_technology(void)540 static int bat_technology(void)
541 {
542 u8 status = ec_read_u8(BAT_STATUS1);
543
544 if (status & BAT_S1_LiION_OR_NiMH)
545 return POWER_SUPPLY_TECHNOLOGY_LION;
546 return POWER_SUPPLY_TECHNOLOGY_NiMH;
547 }
548
bat_capacity_level(void)549 static int bat_capacity_level(void)
550 {
551 u8 status0 = ec_read_u8(BAT_STATUS0);
552 u8 status1 = ec_read_u8(BAT_STATUS1);
553 u8 status2 = ec_read_u8(BAT_STATUS2);
554
555 if (status0 & BAT_S0_DISCHRG_CRITICAL
556 || status1 & BAT_S1_EMPTY
557 || status2 & BAT_S2_LOW_LOW)
558 return POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL;
559 if (status0 & BAT_S0_LOW)
560 return POWER_SUPPLY_CAPACITY_LEVEL_LOW;
561 if (status1 & BAT_S1_FULL)
562 return POWER_SUPPLY_CAPACITY_LEVEL_FULL;
563 return POWER_SUPPLY_CAPACITY_LEVEL_NORMAL;
564 }
565
bat_get_property(struct power_supply * psy,enum power_supply_property psp,union power_supply_propval * val)566 static int bat_get_property(struct power_supply *psy,
567 enum power_supply_property psp,
568 union power_supply_propval *val)
569 {
570 struct compal_data *data = power_supply_get_drvdata(psy);
571
572 switch (psp) {
573 case POWER_SUPPLY_PROP_STATUS:
574 val->intval = bat_status();
575 break;
576 case POWER_SUPPLY_PROP_HEALTH:
577 val->intval = bat_health();
578 break;
579 case POWER_SUPPLY_PROP_PRESENT:
580 val->intval = bat_is_present();
581 break;
582 case POWER_SUPPLY_PROP_TECHNOLOGY:
583 val->intval = bat_technology();
584 break;
585 case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN: /* THE design voltage... */
586 val->intval = ec_read_u16(BAT_VOLTAGE_DESIGN) * 1000;
587 break;
588 case POWER_SUPPLY_PROP_VOLTAGE_NOW:
589 val->intval = ec_read_u16(BAT_VOLTAGE_NOW) * 1000;
590 break;
591 case POWER_SUPPLY_PROP_CURRENT_NOW:
592 val->intval = ec_read_s16(BAT_CURRENT_NOW) * 1000;
593 break;
594 case POWER_SUPPLY_PROP_CURRENT_AVG:
595 val->intval = ec_read_s16(BAT_CURRENT_AVG) * 1000;
596 break;
597 case POWER_SUPPLY_PROP_POWER_NOW:
598 val->intval = ec_read_u8(BAT_POWER) * 1000000;
599 break;
600 case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
601 val->intval = ec_read_u16(BAT_CHARGE_DESIGN) * 1000;
602 break;
603 case POWER_SUPPLY_PROP_CHARGE_NOW:
604 val->intval = ec_read_u16(BAT_CHARGE_NOW) * 1000;
605 break;
606 case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT:
607 val->intval = ec_read_u8(BAT_CHARGE_LIMIT);
608 break;
609 case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT_MAX:
610 val->intval = BAT_CHARGE_LIMIT_MAX;
611 break;
612 case POWER_SUPPLY_PROP_CAPACITY:
613 val->intval = ec_read_u8(BAT_CAPACITY);
614 break;
615 case POWER_SUPPLY_PROP_CAPACITY_LEVEL:
616 val->intval = bat_capacity_level();
617 break;
618 /* It smees that BAT_TEMP_AVG is a (2's complement?) value showing
619 * the number of degrees, whereas BAT_TEMP is somewhat more
620 * complicated. It looks like this is a negative nember with a
621 * 100/256 divider and an offset of 222. Both were determined
622 * experimentally by comparing BAT_TEMP and BAT_TEMP_AVG. */
623 case POWER_SUPPLY_PROP_TEMP:
624 val->intval = ((222 - (int)ec_read_u8(BAT_TEMP)) * 1000) >> 8;
625 break;
626 case POWER_SUPPLY_PROP_TEMP_AMBIENT: /* Ambient, Avg, ... same thing */
627 val->intval = ec_read_s8(BAT_TEMP_AVG) * 10;
628 break;
629 /* Neither the model name nor manufacturer name work for me. */
630 case POWER_SUPPLY_PROP_MODEL_NAME:
631 val->strval = data->bat_model_name;
632 break;
633 case POWER_SUPPLY_PROP_MANUFACTURER:
634 val->strval = data->bat_manufacturer_name;
635 break;
636 case POWER_SUPPLY_PROP_SERIAL_NUMBER:
637 val->strval = data->bat_serial_number;
638 break;
639 default:
640 break;
641 }
642 return 0;
643 }
644
bat_set_property(struct power_supply * psy,enum power_supply_property psp,const union power_supply_propval * val)645 static int bat_set_property(struct power_supply *psy,
646 enum power_supply_property psp,
647 const union power_supply_propval *val)
648 {
649 int level;
650
651 switch (psp) {
652 case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT:
653 level = val->intval;
654 if (level < 0 || level > BAT_CHARGE_LIMIT_MAX)
655 return -EINVAL;
656 if (ec_write(BAT_CHARGE_LIMIT, level) < 0)
657 return -EIO;
658 break;
659 default:
660 break;
661 }
662 return 0;
663 }
664
bat_writeable_property(struct power_supply * psy,enum power_supply_property psp)665 static int bat_writeable_property(struct power_supply *psy,
666 enum power_supply_property psp)
667 {
668 switch (psp) {
669 case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT:
670 return 1;
671 default:
672 return 0;
673 }
674 }
675
676
677
678
679 /* ============== */
680 /* Driver Globals */
681 /* ============== */
682 static DEVICE_ATTR_RW(wake_up_pme);
683 static DEVICE_ATTR_RW(wake_up_modem);
684 static DEVICE_ATTR_RW(wake_up_lan);
685 static DEVICE_ATTR_RW(wake_up_wlan);
686 static DEVICE_ATTR_RW(wake_up_key);
687 static DEVICE_ATTR_RW(wake_up_mouse);
688
689 static DEVICE_ATTR(fan1_input, S_IRUGO, fan_show, NULL);
690 static DEVICE_ATTR(temp1_input, S_IRUGO, temp_cpu, NULL);
691 static DEVICE_ATTR(temp2_input, S_IRUGO, temp_cpu_local, NULL);
692 static DEVICE_ATTR(temp3_input, S_IRUGO, temp_cpu_DTS, NULL);
693 static DEVICE_ATTR(temp4_input, S_IRUGO, temp_northbridge, NULL);
694 static DEVICE_ATTR(temp5_input, S_IRUGO, temp_vga, NULL);
695 static DEVICE_ATTR(temp6_input, S_IRUGO, temp_SKIN, NULL);
696 static DEVICE_ATTR(temp1_label, S_IRUGO, label_cpu, NULL);
697 static DEVICE_ATTR(temp2_label, S_IRUGO, label_cpu_local, NULL);
698 static DEVICE_ATTR(temp3_label, S_IRUGO, label_cpu_DTS, NULL);
699 static DEVICE_ATTR(temp4_label, S_IRUGO, label_northbridge, NULL);
700 static DEVICE_ATTR(temp5_label, S_IRUGO, label_vga, NULL);
701 static DEVICE_ATTR(temp6_label, S_IRUGO, label_SKIN, NULL);
702 static DEVICE_ATTR(pwm1, S_IRUGO | S_IWUSR, pwm_show, pwm_store);
703 static DEVICE_ATTR(pwm1_enable,
704 S_IRUGO | S_IWUSR, pwm_enable_show, pwm_enable_store);
705
706 static struct attribute *compal_platform_attrs[] = {
707 &dev_attr_wake_up_pme.attr,
708 &dev_attr_wake_up_modem.attr,
709 &dev_attr_wake_up_lan.attr,
710 &dev_attr_wake_up_wlan.attr,
711 &dev_attr_wake_up_key.attr,
712 &dev_attr_wake_up_mouse.attr,
713 NULL
714 };
715 static const struct attribute_group compal_platform_attr_group = {
716 .attrs = compal_platform_attrs
717 };
718
719 static struct attribute *compal_hwmon_attrs[] = {
720 &dev_attr_pwm1_enable.attr,
721 &dev_attr_pwm1.attr,
722 &dev_attr_fan1_input.attr,
723 &dev_attr_temp1_input.attr,
724 &dev_attr_temp2_input.attr,
725 &dev_attr_temp3_input.attr,
726 &dev_attr_temp4_input.attr,
727 &dev_attr_temp5_input.attr,
728 &dev_attr_temp6_input.attr,
729 &dev_attr_temp1_label.attr,
730 &dev_attr_temp2_label.attr,
731 &dev_attr_temp3_label.attr,
732 &dev_attr_temp4_label.attr,
733 &dev_attr_temp5_label.attr,
734 &dev_attr_temp6_label.attr,
735 NULL
736 };
737 ATTRIBUTE_GROUPS(compal_hwmon);
738
739 static int compal_probe(struct platform_device *);
740 static int compal_remove(struct platform_device *);
741 static struct platform_driver compal_driver = {
742 .driver = {
743 .name = DRIVER_NAME,
744 },
745 .probe = compal_probe,
746 .remove = compal_remove,
747 };
748
749 static enum power_supply_property compal_bat_properties[] = {
750 POWER_SUPPLY_PROP_STATUS,
751 POWER_SUPPLY_PROP_HEALTH,
752 POWER_SUPPLY_PROP_PRESENT,
753 POWER_SUPPLY_PROP_TECHNOLOGY,
754 POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
755 POWER_SUPPLY_PROP_VOLTAGE_NOW,
756 POWER_SUPPLY_PROP_CURRENT_NOW,
757 POWER_SUPPLY_PROP_CURRENT_AVG,
758 POWER_SUPPLY_PROP_POWER_NOW,
759 POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
760 POWER_SUPPLY_PROP_CHARGE_NOW,
761 POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT,
762 POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT_MAX,
763 POWER_SUPPLY_PROP_CAPACITY,
764 POWER_SUPPLY_PROP_CAPACITY_LEVEL,
765 POWER_SUPPLY_PROP_TEMP,
766 POWER_SUPPLY_PROP_TEMP_AMBIENT,
767 POWER_SUPPLY_PROP_MODEL_NAME,
768 POWER_SUPPLY_PROP_MANUFACTURER,
769 POWER_SUPPLY_PROP_SERIAL_NUMBER,
770 };
771
772 static struct backlight_device *compalbl_device;
773
774 static struct platform_device *compal_device;
775
776 static struct rfkill *wifi_rfkill;
777 static struct rfkill *bt_rfkill;
778
779
780
781
782
783 /* =================================== */
784 /* Initialization & clean-up functions */
785 /* =================================== */
786
dmi_check_cb(const struct dmi_system_id * id)787 static int dmi_check_cb(const struct dmi_system_id *id)
788 {
789 pr_info("Identified laptop model '%s'\n", id->ident);
790 extra_features = false;
791 return 1;
792 }
793
dmi_check_cb_extra(const struct dmi_system_id * id)794 static int dmi_check_cb_extra(const struct dmi_system_id *id)
795 {
796 pr_info("Identified laptop model '%s', enabling extra features\n",
797 id->ident);
798 extra_features = true;
799 return 1;
800 }
801
802 static const struct dmi_system_id compal_dmi_table[] __initconst = {
803 {
804 .ident = "FL90/IFL90",
805 .matches = {
806 DMI_MATCH(DMI_BOARD_NAME, "IFL90"),
807 DMI_MATCH(DMI_BOARD_VERSION, "IFT00"),
808 },
809 .callback = dmi_check_cb
810 },
811 {
812 .ident = "FL90/IFL90",
813 .matches = {
814 DMI_MATCH(DMI_BOARD_NAME, "IFL90"),
815 DMI_MATCH(DMI_BOARD_VERSION, "REFERENCE"),
816 },
817 .callback = dmi_check_cb
818 },
819 {
820 .ident = "FL91/IFL91",
821 .matches = {
822 DMI_MATCH(DMI_BOARD_NAME, "IFL91"),
823 DMI_MATCH(DMI_BOARD_VERSION, "IFT00"),
824 },
825 .callback = dmi_check_cb
826 },
827 {
828 .ident = "FL92/JFL92",
829 .matches = {
830 DMI_MATCH(DMI_BOARD_NAME, "JFL92"),
831 DMI_MATCH(DMI_BOARD_VERSION, "IFT00"),
832 },
833 .callback = dmi_check_cb
834 },
835 {
836 .ident = "FT00/IFT00",
837 .matches = {
838 DMI_MATCH(DMI_BOARD_NAME, "IFT00"),
839 DMI_MATCH(DMI_BOARD_VERSION, "IFT00"),
840 },
841 .callback = dmi_check_cb
842 },
843 {
844 .ident = "Dell Mini 9",
845 .matches = {
846 DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
847 DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 910"),
848 },
849 .callback = dmi_check_cb
850 },
851 {
852 .ident = "Dell Mini 10",
853 .matches = {
854 DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
855 DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 1010"),
856 },
857 .callback = dmi_check_cb
858 },
859 {
860 .ident = "Dell Mini 10v",
861 .matches = {
862 DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
863 DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 1011"),
864 },
865 .callback = dmi_check_cb
866 },
867 {
868 .ident = "Dell Mini 1012",
869 .matches = {
870 DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
871 DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 1012"),
872 },
873 .callback = dmi_check_cb
874 },
875 {
876 .ident = "Dell Inspiron 11z",
877 .matches = {
878 DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
879 DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 1110"),
880 },
881 .callback = dmi_check_cb
882 },
883 {
884 .ident = "Dell Mini 12",
885 .matches = {
886 DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
887 DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 1210"),
888 },
889 .callback = dmi_check_cb
890 },
891 {
892 .ident = "JHL90",
893 .matches = {
894 DMI_MATCH(DMI_BOARD_NAME, "JHL90"),
895 DMI_MATCH(DMI_BOARD_VERSION, "REFERENCE"),
896 },
897 .callback = dmi_check_cb_extra
898 },
899 {
900 .ident = "KHLB2",
901 .matches = {
902 DMI_MATCH(DMI_BOARD_NAME, "KHLB2"),
903 DMI_MATCH(DMI_BOARD_VERSION, "REFERENCE"),
904 },
905 .callback = dmi_check_cb_extra
906 },
907 { }
908 };
909 MODULE_DEVICE_TABLE(dmi, compal_dmi_table);
910
911 static const struct power_supply_desc psy_bat_desc = {
912 .name = DRIVER_NAME,
913 .type = POWER_SUPPLY_TYPE_BATTERY,
914 .properties = compal_bat_properties,
915 .num_properties = ARRAY_SIZE(compal_bat_properties),
916 .get_property = bat_get_property,
917 .set_property = bat_set_property,
918 .property_is_writeable = bat_writeable_property,
919 };
920
initialize_power_supply_data(struct compal_data * data)921 static void initialize_power_supply_data(struct compal_data *data)
922 {
923 ec_read_sequence(BAT_MANUFACTURER_NAME_ADDR,
924 data->bat_manufacturer_name,
925 BAT_MANUFACTURER_NAME_LEN);
926 data->bat_manufacturer_name[BAT_MANUFACTURER_NAME_LEN] = 0;
927
928 ec_read_sequence(BAT_MODEL_NAME_ADDR,
929 data->bat_model_name,
930 BAT_MODEL_NAME_LEN);
931 data->bat_model_name[BAT_MODEL_NAME_LEN] = 0;
932
933 scnprintf(data->bat_serial_number, BAT_SERIAL_NUMBER_LEN + 1, "%d",
934 ec_read_u16(BAT_SERIAL_NUMBER_ADDR));
935 }
936
initialize_fan_control_data(struct compal_data * data)937 static void initialize_fan_control_data(struct compal_data *data)
938 {
939 data->pwm_enable = 2; /* Keep motherboard in control for now */
940 data->curr_pwm = 255; /* Try not to cause a CPU_on_fire exception
941 if we take over... */
942 }
943
setup_rfkill(void)944 static int setup_rfkill(void)
945 {
946 int ret;
947
948 wifi_rfkill = rfkill_alloc("compal-wifi", &compal_device->dev,
949 RFKILL_TYPE_WLAN, &compal_rfkill_ops,
950 (void *) WIRELESS_WLAN);
951 if (!wifi_rfkill)
952 return -ENOMEM;
953
954 ret = rfkill_register(wifi_rfkill);
955 if (ret)
956 goto err_wifi;
957
958 bt_rfkill = rfkill_alloc("compal-bluetooth", &compal_device->dev,
959 RFKILL_TYPE_BLUETOOTH, &compal_rfkill_ops,
960 (void *) WIRELESS_BT);
961 if (!bt_rfkill) {
962 ret = -ENOMEM;
963 goto err_allocate_bt;
964 }
965 ret = rfkill_register(bt_rfkill);
966 if (ret)
967 goto err_register_bt;
968
969 return 0;
970
971 err_register_bt:
972 rfkill_destroy(bt_rfkill);
973
974 err_allocate_bt:
975 rfkill_unregister(wifi_rfkill);
976
977 err_wifi:
978 rfkill_destroy(wifi_rfkill);
979
980 return ret;
981 }
982
compal_init(void)983 static int __init compal_init(void)
984 {
985 int ret;
986
987 if (acpi_disabled) {
988 pr_err("ACPI needs to be enabled for this driver to work!\n");
989 return -ENODEV;
990 }
991
992 if (!force && !dmi_check_system(compal_dmi_table)) {
993 pr_err("Motherboard not recognized (You could try the module's force-parameter)\n");
994 return -ENODEV;
995 }
996
997 if (acpi_video_get_backlight_type() == acpi_backlight_vendor) {
998 struct backlight_properties props;
999 memset(&props, 0, sizeof(struct backlight_properties));
1000 props.type = BACKLIGHT_PLATFORM;
1001 props.max_brightness = BACKLIGHT_LEVEL_MAX;
1002 compalbl_device = backlight_device_register(DRIVER_NAME,
1003 NULL, NULL,
1004 &compalbl_ops,
1005 &props);
1006 if (IS_ERR(compalbl_device))
1007 return PTR_ERR(compalbl_device);
1008 }
1009
1010 ret = platform_driver_register(&compal_driver);
1011 if (ret)
1012 goto err_backlight;
1013
1014 compal_device = platform_device_alloc(DRIVER_NAME, -1);
1015 if (!compal_device) {
1016 ret = -ENOMEM;
1017 goto err_platform_driver;
1018 }
1019
1020 ret = platform_device_add(compal_device); /* This calls compal_probe */
1021 if (ret)
1022 goto err_platform_device;
1023
1024 ret = setup_rfkill();
1025 if (ret)
1026 goto err_rfkill;
1027
1028 pr_info("Driver " DRIVER_VERSION " successfully loaded\n");
1029 return 0;
1030
1031 err_rfkill:
1032 platform_device_del(compal_device);
1033
1034 err_platform_device:
1035 platform_device_put(compal_device);
1036
1037 err_platform_driver:
1038 platform_driver_unregister(&compal_driver);
1039
1040 err_backlight:
1041 backlight_device_unregister(compalbl_device);
1042
1043 return ret;
1044 }
1045
compal_probe(struct platform_device * pdev)1046 static int compal_probe(struct platform_device *pdev)
1047 {
1048 int err;
1049 struct compal_data *data;
1050 struct device *hwmon_dev;
1051 struct power_supply_config psy_cfg = {};
1052
1053 if (!extra_features)
1054 return 0;
1055
1056 /* Fan control */
1057 data = devm_kzalloc(&pdev->dev, sizeof(struct compal_data), GFP_KERNEL);
1058 if (!data)
1059 return -ENOMEM;
1060
1061 initialize_fan_control_data(data);
1062
1063 err = sysfs_create_group(&pdev->dev.kobj, &compal_platform_attr_group);
1064 if (err)
1065 return err;
1066
1067 hwmon_dev = devm_hwmon_device_register_with_groups(&pdev->dev,
1068 "compal", data,
1069 compal_hwmon_groups);
1070 if (IS_ERR(hwmon_dev)) {
1071 err = PTR_ERR(hwmon_dev);
1072 goto remove;
1073 }
1074
1075 /* Power supply */
1076 initialize_power_supply_data(data);
1077 psy_cfg.drv_data = data;
1078 data->psy = power_supply_register(&compal_device->dev, &psy_bat_desc,
1079 &psy_cfg);
1080 if (IS_ERR(data->psy)) {
1081 err = PTR_ERR(data->psy);
1082 goto remove;
1083 }
1084
1085 platform_set_drvdata(pdev, data);
1086
1087 return 0;
1088
1089 remove:
1090 sysfs_remove_group(&pdev->dev.kobj, &compal_platform_attr_group);
1091 return err;
1092 }
1093
compal_cleanup(void)1094 static void __exit compal_cleanup(void)
1095 {
1096 platform_device_unregister(compal_device);
1097 platform_driver_unregister(&compal_driver);
1098 backlight_device_unregister(compalbl_device);
1099 rfkill_unregister(wifi_rfkill);
1100 rfkill_unregister(bt_rfkill);
1101 rfkill_destroy(wifi_rfkill);
1102 rfkill_destroy(bt_rfkill);
1103
1104 pr_info("Driver unloaded\n");
1105 }
1106
compal_remove(struct platform_device * pdev)1107 static int compal_remove(struct platform_device *pdev)
1108 {
1109 struct compal_data *data;
1110
1111 if (!extra_features)
1112 return 0;
1113
1114 pr_info("Unloading: resetting fan control to motherboard\n");
1115 pwm_disable_control();
1116
1117 data = platform_get_drvdata(pdev);
1118 power_supply_unregister(data->psy);
1119
1120 sysfs_remove_group(&pdev->dev.kobj, &compal_platform_attr_group);
1121
1122 return 0;
1123 }
1124
1125
1126 module_init(compal_init);
1127 module_exit(compal_cleanup);
1128
1129 MODULE_AUTHOR("Cezary Jackiewicz");
1130 MODULE_AUTHOR("Roald Frederickx (roald.frederickx@gmail.com)");
1131 MODULE_DESCRIPTION("Compal Laptop Support");
1132 MODULE_VERSION(DRIVER_VERSION);
1133 MODULE_LICENSE("GPL");
1134
