1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 * Support for V3 Semiconductor PCI Local Bus to PCI Bridge
4 * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org>
5 *
6 * Based on the code from arch/arm/mach-integrator/pci_v3.c
7 * Copyright (C) 1999 ARM Limited
8 * Copyright (C) 2000-2001 Deep Blue Solutions Ltd
9 *
10 * Contributors to the old driver include:
11 * Russell King <linux@armlinux.org.uk>
12 * David A. Rusling <david.rusling@linaro.org> (uHAL, ARM Firmware suite)
13 * Rob Herring <robh@kernel.org>
14 * Liviu Dudau <Liviu.Dudau@arm.com>
15 * Grant Likely <grant.likely@secretlab.ca>
16 * Arnd Bergmann <arnd@arndb.de>
17 * Bjorn Helgaas <bhelgaas@google.com>
18 */
19 #include <linux/init.h>
20 #include <linux/interrupt.h>
21 #include <linux/io.h>
22 #include <linux/kernel.h>
23 #include <linux/of_address.h>
24 #include <linux/of_device.h>
25 #include <linux/of_irq.h>
26 #include <linux/of_pci.h>
27 #include <linux/pci.h>
28 #include <linux/platform_device.h>
29 #include <linux/slab.h>
30 #include <linux/bitops.h>
31 #include <linux/irq.h>
32 #include <linux/mfd/syscon.h>
33 #include <linux/regmap.h>
34 #include <linux/clk.h>
35
36 #include "../pci.h"
37
38 #define V3_PCI_VENDOR 0x00000000
39 #define V3_PCI_DEVICE 0x00000002
40 #define V3_PCI_CMD 0x00000004
41 #define V3_PCI_STAT 0x00000006
42 #define V3_PCI_CC_REV 0x00000008
43 #define V3_PCI_HDR_CFG 0x0000000C
44 #define V3_PCI_IO_BASE 0x00000010
45 #define V3_PCI_BASE0 0x00000014
46 #define V3_PCI_BASE1 0x00000018
47 #define V3_PCI_SUB_VENDOR 0x0000002C
48 #define V3_PCI_SUB_ID 0x0000002E
49 #define V3_PCI_ROM 0x00000030
50 #define V3_PCI_BPARAM 0x0000003C
51 #define V3_PCI_MAP0 0x00000040
52 #define V3_PCI_MAP1 0x00000044
53 #define V3_PCI_INT_STAT 0x00000048
54 #define V3_PCI_INT_CFG 0x0000004C
55 #define V3_LB_BASE0 0x00000054
56 #define V3_LB_BASE1 0x00000058
57 #define V3_LB_MAP0 0x0000005E
58 #define V3_LB_MAP1 0x00000062
59 #define V3_LB_BASE2 0x00000064
60 #define V3_LB_MAP2 0x00000066
61 #define V3_LB_SIZE 0x00000068
62 #define V3_LB_IO_BASE 0x0000006E
63 #define V3_FIFO_CFG 0x00000070
64 #define V3_FIFO_PRIORITY 0x00000072
65 #define V3_FIFO_STAT 0x00000074
66 #define V3_LB_ISTAT 0x00000076
67 #define V3_LB_IMASK 0x00000077
68 #define V3_SYSTEM 0x00000078
69 #define V3_LB_CFG 0x0000007A
70 #define V3_PCI_CFG 0x0000007C
71 #define V3_DMA_PCI_ADR0 0x00000080
72 #define V3_DMA_PCI_ADR1 0x00000090
73 #define V3_DMA_LOCAL_ADR0 0x00000084
74 #define V3_DMA_LOCAL_ADR1 0x00000094
75 #define V3_DMA_LENGTH0 0x00000088
76 #define V3_DMA_LENGTH1 0x00000098
77 #define V3_DMA_CSR0 0x0000008B
78 #define V3_DMA_CSR1 0x0000009B
79 #define V3_DMA_CTLB_ADR0 0x0000008C
80 #define V3_DMA_CTLB_ADR1 0x0000009C
81 #define V3_DMA_DELAY 0x000000E0
82 #define V3_MAIL_DATA 0x000000C0
83 #define V3_PCI_MAIL_IEWR 0x000000D0
84 #define V3_PCI_MAIL_IERD 0x000000D2
85 #define V3_LB_MAIL_IEWR 0x000000D4
86 #define V3_LB_MAIL_IERD 0x000000D6
87 #define V3_MAIL_WR_STAT 0x000000D8
88 #define V3_MAIL_RD_STAT 0x000000DA
89 #define V3_QBA_MAP 0x000000DC
90
91 /* PCI STATUS bits */
92 #define V3_PCI_STAT_PAR_ERR BIT(15)
93 #define V3_PCI_STAT_SYS_ERR BIT(14)
94 #define V3_PCI_STAT_M_ABORT_ERR BIT(13)
95 #define V3_PCI_STAT_T_ABORT_ERR BIT(12)
96
97 /* LB ISTAT bits */
98 #define V3_LB_ISTAT_MAILBOX BIT(7)
99 #define V3_LB_ISTAT_PCI_RD BIT(6)
100 #define V3_LB_ISTAT_PCI_WR BIT(5)
101 #define V3_LB_ISTAT_PCI_INT BIT(4)
102 #define V3_LB_ISTAT_PCI_PERR BIT(3)
103 #define V3_LB_ISTAT_I2O_QWR BIT(2)
104 #define V3_LB_ISTAT_DMA1 BIT(1)
105 #define V3_LB_ISTAT_DMA0 BIT(0)
106
107 /* PCI COMMAND bits */
108 #define V3_COMMAND_M_FBB_EN BIT(9)
109 #define V3_COMMAND_M_SERR_EN BIT(8)
110 #define V3_COMMAND_M_PAR_EN BIT(6)
111 #define V3_COMMAND_M_MASTER_EN BIT(2)
112 #define V3_COMMAND_M_MEM_EN BIT(1)
113 #define V3_COMMAND_M_IO_EN BIT(0)
114
115 /* SYSTEM bits */
116 #define V3_SYSTEM_M_RST_OUT BIT(15)
117 #define V3_SYSTEM_M_LOCK BIT(14)
118 #define V3_SYSTEM_UNLOCK 0xa05f
119
120 /* PCI CFG bits */
121 #define V3_PCI_CFG_M_I2O_EN BIT(15)
122 #define V3_PCI_CFG_M_IO_REG_DIS BIT(14)
123 #define V3_PCI_CFG_M_IO_DIS BIT(13)
124 #define V3_PCI_CFG_M_EN3V BIT(12)
125 #define V3_PCI_CFG_M_RETRY_EN BIT(10)
126 #define V3_PCI_CFG_M_AD_LOW1 BIT(9)
127 #define V3_PCI_CFG_M_AD_LOW0 BIT(8)
128 /*
129 * This is the value applied to C/BE[3:1], with bit 0 always held 0
130 * during DMA access.
131 */
132 #define V3_PCI_CFG_M_RTYPE_SHIFT 5
133 #define V3_PCI_CFG_M_WTYPE_SHIFT 1
134 #define V3_PCI_CFG_TYPE_DEFAULT 0x3
135
136 /* PCI BASE bits (PCI -> Local Bus) */
137 #define V3_PCI_BASE_M_ADR_BASE 0xFFF00000U
138 #define V3_PCI_BASE_M_ADR_BASEL 0x000FFF00U
139 #define V3_PCI_BASE_M_PREFETCH BIT(3)
140 #define V3_PCI_BASE_M_TYPE (3 << 1)
141 #define V3_PCI_BASE_M_IO BIT(0)
142
143 /* PCI MAP bits (PCI -> Local bus) */
144 #define V3_PCI_MAP_M_MAP_ADR 0xFFF00000U
145 #define V3_PCI_MAP_M_RD_POST_INH BIT(15)
146 #define V3_PCI_MAP_M_ROM_SIZE (3 << 10)
147 #define V3_PCI_MAP_M_SWAP (3 << 8)
148 #define V3_PCI_MAP_M_ADR_SIZE 0x000000F0U
149 #define V3_PCI_MAP_M_REG_EN BIT(1)
150 #define V3_PCI_MAP_M_ENABLE BIT(0)
151
152 /* LB_BASE0,1 bits (Local bus -> PCI) */
153 #define V3_LB_BASE_ADR_BASE 0xfff00000U
154 #define V3_LB_BASE_SWAP (3 << 8)
155 #define V3_LB_BASE_ADR_SIZE (15 << 4)
156 #define V3_LB_BASE_PREFETCH BIT(3)
157 #define V3_LB_BASE_ENABLE BIT(0)
158
159 #define V3_LB_BASE_ADR_SIZE_1MB (0 << 4)
160 #define V3_LB_BASE_ADR_SIZE_2MB (1 << 4)
161 #define V3_LB_BASE_ADR_SIZE_4MB (2 << 4)
162 #define V3_LB_BASE_ADR_SIZE_8MB (3 << 4)
163 #define V3_LB_BASE_ADR_SIZE_16MB (4 << 4)
164 #define V3_LB_BASE_ADR_SIZE_32MB (5 << 4)
165 #define V3_LB_BASE_ADR_SIZE_64MB (6 << 4)
166 #define V3_LB_BASE_ADR_SIZE_128MB (7 << 4)
167 #define V3_LB_BASE_ADR_SIZE_256MB (8 << 4)
168 #define V3_LB_BASE_ADR_SIZE_512MB (9 << 4)
169 #define V3_LB_BASE_ADR_SIZE_1GB (10 << 4)
170 #define V3_LB_BASE_ADR_SIZE_2GB (11 << 4)
171
172 #define v3_addr_to_lb_base(a) ((a) & V3_LB_BASE_ADR_BASE)
173
174 /* LB_MAP0,1 bits (Local bus -> PCI) */
175 #define V3_LB_MAP_MAP_ADR 0xfff0U
176 #define V3_LB_MAP_TYPE (7 << 1)
177 #define V3_LB_MAP_AD_LOW_EN BIT(0)
178
179 #define V3_LB_MAP_TYPE_IACK (0 << 1)
180 #define V3_LB_MAP_TYPE_IO (1 << 1)
181 #define V3_LB_MAP_TYPE_MEM (3 << 1)
182 #define V3_LB_MAP_TYPE_CONFIG (5 << 1)
183 #define V3_LB_MAP_TYPE_MEM_MULTIPLE (6 << 1)
184
185 #define v3_addr_to_lb_map(a) (((a) >> 16) & V3_LB_MAP_MAP_ADR)
186
187 /* LB_BASE2 bits (Local bus -> PCI IO) */
188 #define V3_LB_BASE2_ADR_BASE 0xff00U
189 #define V3_LB_BASE2_SWAP_AUTO (3 << 6)
190 #define V3_LB_BASE2_ENABLE BIT(0)
191
192 #define v3_addr_to_lb_base2(a) (((a) >> 16) & V3_LB_BASE2_ADR_BASE)
193
194 /* LB_MAP2 bits (Local bus -> PCI IO) */
195 #define V3_LB_MAP2_MAP_ADR 0xff00U
196
197 #define v3_addr_to_lb_map2(a) (((a) >> 16) & V3_LB_MAP2_MAP_ADR)
198
199 /* FIFO priority bits */
200 #define V3_FIFO_PRIO_LOCAL BIT(12)
201 #define V3_FIFO_PRIO_LB_RD1_FLUSH_EOB BIT(10)
202 #define V3_FIFO_PRIO_LB_RD1_FLUSH_AP1 BIT(11)
203 #define V3_FIFO_PRIO_LB_RD1_FLUSH_ANY (BIT(10)|BIT(11))
204 #define V3_FIFO_PRIO_LB_RD0_FLUSH_EOB BIT(8)
205 #define V3_FIFO_PRIO_LB_RD0_FLUSH_AP1 BIT(9)
206 #define V3_FIFO_PRIO_LB_RD0_FLUSH_ANY (BIT(8)|BIT(9))
207 #define V3_FIFO_PRIO_PCI BIT(4)
208 #define V3_FIFO_PRIO_PCI_RD1_FLUSH_EOB BIT(2)
209 #define V3_FIFO_PRIO_PCI_RD1_FLUSH_AP1 BIT(3)
210 #define V3_FIFO_PRIO_PCI_RD1_FLUSH_ANY (BIT(2)|BIT(3))
211 #define V3_FIFO_PRIO_PCI_RD0_FLUSH_EOB BIT(0)
212 #define V3_FIFO_PRIO_PCI_RD0_FLUSH_AP1 BIT(1)
213 #define V3_FIFO_PRIO_PCI_RD0_FLUSH_ANY (BIT(0)|BIT(1))
214
215 /* Local bus configuration bits */
216 #define V3_LB_CFG_LB_TO_64_CYCLES 0x0000
217 #define V3_LB_CFG_LB_TO_256_CYCLES BIT(13)
218 #define V3_LB_CFG_LB_TO_512_CYCLES BIT(14)
219 #define V3_LB_CFG_LB_TO_1024_CYCLES (BIT(13)|BIT(14))
220 #define V3_LB_CFG_LB_RST BIT(12)
221 #define V3_LB_CFG_LB_PPC_RDY BIT(11)
222 #define V3_LB_CFG_LB_LB_INT BIT(10)
223 #define V3_LB_CFG_LB_ERR_EN BIT(9)
224 #define V3_LB_CFG_LB_RDY_EN BIT(8)
225 #define V3_LB_CFG_LB_BE_IMODE BIT(7)
226 #define V3_LB_CFG_LB_BE_OMODE BIT(6)
227 #define V3_LB_CFG_LB_ENDIAN BIT(5)
228 #define V3_LB_CFG_LB_PARK_EN BIT(4)
229 #define V3_LB_CFG_LB_FBB_DIS BIT(2)
230
231 /* ARM Integrator-specific extended control registers */
232 #define INTEGRATOR_SC_PCI_OFFSET 0x18
233 #define INTEGRATOR_SC_PCI_ENABLE BIT(0)
234 #define INTEGRATOR_SC_PCI_INTCLR BIT(1)
235 #define INTEGRATOR_SC_LBFADDR_OFFSET 0x20
236 #define INTEGRATOR_SC_LBFCODE_OFFSET 0x24
237
238 struct v3_pci {
239 struct device *dev;
240 void __iomem *base;
241 void __iomem *config_base;
242 struct pci_bus *bus;
243 u32 config_mem;
244 u32 io_mem;
245 u32 non_pre_mem;
246 u32 pre_mem;
247 phys_addr_t io_bus_addr;
248 phys_addr_t non_pre_bus_addr;
249 phys_addr_t pre_bus_addr;
250 struct regmap *map;
251 };
252
253 /*
254 * The V3 PCI interface chip in Integrator provides several windows from
255 * local bus memory into the PCI memory areas. Unfortunately, there
256 * are not really enough windows for our usage, therefore we reuse
257 * one of the windows for access to PCI configuration space. On the
258 * Integrator/AP, the memory map is as follows:
259 *
260 * Local Bus Memory Usage
261 *
262 * 40000000 - 4FFFFFFF PCI memory. 256M non-prefetchable
263 * 50000000 - 5FFFFFFF PCI memory. 256M prefetchable
264 * 60000000 - 60FFFFFF PCI IO. 16M
265 * 61000000 - 61FFFFFF PCI Configuration. 16M
266 *
267 * There are three V3 windows, each described by a pair of V3 registers.
268 * These are LB_BASE0/LB_MAP0, LB_BASE1/LB_MAP1 and LB_BASE2/LB_MAP2.
269 * Base0 and Base1 can be used for any type of PCI memory access. Base2
270 * can be used either for PCI I/O or for I20 accesses. By default, uHAL
271 * uses this only for PCI IO space.
272 *
273 * Normally these spaces are mapped using the following base registers:
274 *
275 * Usage Local Bus Memory Base/Map registers used
276 *
277 * Mem 40000000 - 4FFFFFFF LB_BASE0/LB_MAP0
278 * Mem 50000000 - 5FFFFFFF LB_BASE1/LB_MAP1
279 * IO 60000000 - 60FFFFFF LB_BASE2/LB_MAP2
280 * Cfg 61000000 - 61FFFFFF
281 *
282 * This means that I20 and PCI configuration space accesses will fail.
283 * When PCI configuration accesses are needed (via the uHAL PCI
284 * configuration space primitives) we must remap the spaces as follows:
285 *
286 * Usage Local Bus Memory Base/Map registers used
287 *
288 * Mem 40000000 - 4FFFFFFF LB_BASE0/LB_MAP0
289 * Mem 50000000 - 5FFFFFFF LB_BASE0/LB_MAP0
290 * IO 60000000 - 60FFFFFF LB_BASE2/LB_MAP2
291 * Cfg 61000000 - 61FFFFFF LB_BASE1/LB_MAP1
292 *
293 * To make this work, the code depends on overlapping windows working.
294 * The V3 chip translates an address by checking its range within
295 * each of the BASE/MAP pairs in turn (in ascending register number
296 * order). It will use the first matching pair. So, for example,
297 * if the same address is mapped by both LB_BASE0/LB_MAP0 and
298 * LB_BASE1/LB_MAP1, the V3 will use the translation from
299 * LB_BASE0/LB_MAP0.
300 *
301 * To allow PCI Configuration space access, the code enlarges the
302 * window mapped by LB_BASE0/LB_MAP0 from 256M to 512M. This occludes
303 * the windows currently mapped by LB_BASE1/LB_MAP1 so that it can
304 * be remapped for use by configuration cycles.
305 *
306 * At the end of the PCI Configuration space accesses,
307 * LB_BASE1/LB_MAP1 is reset to map PCI Memory. Finally the window
308 * mapped by LB_BASE0/LB_MAP0 is reduced in size from 512M to 256M to
309 * reveal the now restored LB_BASE1/LB_MAP1 window.
310 *
311 * NOTE: We do not set up I2O mapping. I suspect that this is only
312 * for an intelligent (target) device. Using I2O disables most of
313 * the mappings into PCI memory.
314 */
v3_map_bus(struct pci_bus * bus,unsigned int devfn,int offset)315 static void __iomem *v3_map_bus(struct pci_bus *bus,
316 unsigned int devfn, int offset)
317 {
318 struct v3_pci *v3 = bus->sysdata;
319 unsigned int address, mapaddress, busnr;
320
321 busnr = bus->number;
322 if (busnr == 0) {
323 int slot = PCI_SLOT(devfn);
324
325 /*
326 * local bus segment so need a type 0 config cycle
327 *
328 * build the PCI configuration "address" with one-hot in
329 * A31-A11
330 *
331 * mapaddress:
332 * 3:1 = config cycle (101)
333 * 0 = PCI A1 & A0 are 0 (0)
334 */
335 address = PCI_FUNC(devfn) << 8;
336 mapaddress = V3_LB_MAP_TYPE_CONFIG;
337
338 if (slot > 12)
339 /*
340 * high order bits are handled by the MAP register
341 */
342 mapaddress |= BIT(slot - 5);
343 else
344 /*
345 * low order bits handled directly in the address
346 */
347 address |= BIT(slot + 11);
348 } else {
349 /*
350 * not the local bus segment so need a type 1 config cycle
351 *
352 * address:
353 * 23:16 = bus number
354 * 15:11 = slot number (7:3 of devfn)
355 * 10:8 = func number (2:0 of devfn)
356 *
357 * mapaddress:
358 * 3:1 = config cycle (101)
359 * 0 = PCI A1 & A0 from host bus (1)
360 */
361 mapaddress = V3_LB_MAP_TYPE_CONFIG | V3_LB_MAP_AD_LOW_EN;
362 address = (busnr << 16) | (devfn << 8);
363 }
364
365 /*
366 * Set up base0 to see all 512Mbytes of memory space (not
367 * prefetchable), this frees up base1 for re-use by
368 * configuration memory
369 */
370 writel(v3_addr_to_lb_base(v3->non_pre_mem) |
371 V3_LB_BASE_ADR_SIZE_512MB | V3_LB_BASE_ENABLE,
372 v3->base + V3_LB_BASE0);
373
374 /*
375 * Set up base1/map1 to point into configuration space.
376 * The config mem is always 16MB.
377 */
378 writel(v3_addr_to_lb_base(v3->config_mem) |
379 V3_LB_BASE_ADR_SIZE_16MB | V3_LB_BASE_ENABLE,
380 v3->base + V3_LB_BASE1);
381 writew(mapaddress, v3->base + V3_LB_MAP1);
382
383 return v3->config_base + address + offset;
384 }
385
v3_unmap_bus(struct v3_pci * v3)386 static void v3_unmap_bus(struct v3_pci *v3)
387 {
388 /*
389 * Reassign base1 for use by prefetchable PCI memory
390 */
391 writel(v3_addr_to_lb_base(v3->pre_mem) |
392 V3_LB_BASE_ADR_SIZE_256MB | V3_LB_BASE_PREFETCH |
393 V3_LB_BASE_ENABLE,
394 v3->base + V3_LB_BASE1);
395 writew(v3_addr_to_lb_map(v3->pre_bus_addr) |
396 V3_LB_MAP_TYPE_MEM, /* was V3_LB_MAP_TYPE_MEM_MULTIPLE */
397 v3->base + V3_LB_MAP1);
398
399 /*
400 * And shrink base0 back to a 256M window (NOTE: MAP0 already correct)
401 */
402 writel(v3_addr_to_lb_base(v3->non_pre_mem) |
403 V3_LB_BASE_ADR_SIZE_256MB | V3_LB_BASE_ENABLE,
404 v3->base + V3_LB_BASE0);
405 }
406
v3_pci_read_config(struct pci_bus * bus,unsigned int fn,int config,int size,u32 * value)407 static int v3_pci_read_config(struct pci_bus *bus, unsigned int fn,
408 int config, int size, u32 *value)
409 {
410 struct v3_pci *v3 = bus->sysdata;
411 int ret;
412
413 dev_dbg(&bus->dev,
414 "[read] slt: %.2d, fnc: %d, cnf: 0x%.2X, val (%d bytes): 0x%.8X\n",
415 PCI_SLOT(fn), PCI_FUNC(fn), config, size, *value);
416 ret = pci_generic_config_read(bus, fn, config, size, value);
417 v3_unmap_bus(v3);
418 return ret;
419 }
420
v3_pci_write_config(struct pci_bus * bus,unsigned int fn,int config,int size,u32 value)421 static int v3_pci_write_config(struct pci_bus *bus, unsigned int fn,
422 int config, int size, u32 value)
423 {
424 struct v3_pci *v3 = bus->sysdata;
425 int ret;
426
427 dev_dbg(&bus->dev,
428 "[write] slt: %.2d, fnc: %d, cnf: 0x%.2X, val (%d bytes): 0x%.8X\n",
429 PCI_SLOT(fn), PCI_FUNC(fn), config, size, value);
430 ret = pci_generic_config_write(bus, fn, config, size, value);
431 v3_unmap_bus(v3);
432 return ret;
433 }
434
435 static struct pci_ops v3_pci_ops = {
436 .map_bus = v3_map_bus,
437 .read = v3_pci_read_config,
438 .write = v3_pci_write_config,
439 };
440
v3_irq(int irq,void * data)441 static irqreturn_t v3_irq(int irq, void *data)
442 {
443 struct v3_pci *v3 = data;
444 struct device *dev = v3->dev;
445 u32 status;
446
447 status = readw(v3->base + V3_PCI_STAT);
448 if (status & V3_PCI_STAT_PAR_ERR)
449 dev_err(dev, "parity error interrupt\n");
450 if (status & V3_PCI_STAT_SYS_ERR)
451 dev_err(dev, "system error interrupt\n");
452 if (status & V3_PCI_STAT_M_ABORT_ERR)
453 dev_err(dev, "master abort error interrupt\n");
454 if (status & V3_PCI_STAT_T_ABORT_ERR)
455 dev_err(dev, "target abort error interrupt\n");
456 writew(status, v3->base + V3_PCI_STAT);
457
458 status = readb(v3->base + V3_LB_ISTAT);
459 if (status & V3_LB_ISTAT_MAILBOX)
460 dev_info(dev, "PCI mailbox interrupt\n");
461 if (status & V3_LB_ISTAT_PCI_RD)
462 dev_err(dev, "PCI target LB->PCI READ abort interrupt\n");
463 if (status & V3_LB_ISTAT_PCI_WR)
464 dev_err(dev, "PCI target LB->PCI WRITE abort interrupt\n");
465 if (status & V3_LB_ISTAT_PCI_INT)
466 dev_info(dev, "PCI pin interrupt\n");
467 if (status & V3_LB_ISTAT_PCI_PERR)
468 dev_err(dev, "PCI parity error interrupt\n");
469 if (status & V3_LB_ISTAT_I2O_QWR)
470 dev_info(dev, "I2O inbound post queue interrupt\n");
471 if (status & V3_LB_ISTAT_DMA1)
472 dev_info(dev, "DMA channel 1 interrupt\n");
473 if (status & V3_LB_ISTAT_DMA0)
474 dev_info(dev, "DMA channel 0 interrupt\n");
475 /* Clear all possible interrupts on the local bus */
476 writeb(0, v3->base + V3_LB_ISTAT);
477 if (v3->map)
478 regmap_write(v3->map, INTEGRATOR_SC_PCI_OFFSET,
479 INTEGRATOR_SC_PCI_ENABLE |
480 INTEGRATOR_SC_PCI_INTCLR);
481
482 return IRQ_HANDLED;
483 }
484
v3_integrator_init(struct v3_pci * v3)485 static int v3_integrator_init(struct v3_pci *v3)
486 {
487 unsigned int val;
488
489 v3->map =
490 syscon_regmap_lookup_by_compatible("arm,integrator-ap-syscon");
491 if (IS_ERR(v3->map)) {
492 dev_err(v3->dev, "no syscon\n");
493 return -ENODEV;
494 }
495
496 regmap_read(v3->map, INTEGRATOR_SC_PCI_OFFSET, &val);
497 /* Take the PCI bridge out of reset, clear IRQs */
498 regmap_write(v3->map, INTEGRATOR_SC_PCI_OFFSET,
499 INTEGRATOR_SC_PCI_ENABLE |
500 INTEGRATOR_SC_PCI_INTCLR);
501
502 if (!(val & INTEGRATOR_SC_PCI_ENABLE)) {
503 /* If we were in reset we need to sleep a bit */
504 msleep(230);
505
506 /* Set the physical base for the controller itself */
507 writel(0x6200, v3->base + V3_LB_IO_BASE);
508
509 /* Wait for the mailbox to settle after reset */
510 do {
511 writeb(0xaa, v3->base + V3_MAIL_DATA);
512 writeb(0x55, v3->base + V3_MAIL_DATA + 4);
513 } while (readb(v3->base + V3_MAIL_DATA) != 0xaa &&
514 readb(v3->base + V3_MAIL_DATA) != 0x55);
515 }
516
517 dev_info(v3->dev, "initialized PCI V3 Integrator/AP integration\n");
518
519 return 0;
520 }
521
v3_pci_setup_resource(struct v3_pci * v3,resource_size_t io_base,struct pci_host_bridge * host,struct resource_entry * win)522 static int v3_pci_setup_resource(struct v3_pci *v3,
523 resource_size_t io_base,
524 struct pci_host_bridge *host,
525 struct resource_entry *win)
526 {
527 struct device *dev = v3->dev;
528 struct resource *mem;
529 struct resource *io;
530 int ret;
531
532 switch (resource_type(win->res)) {
533 case IORESOURCE_IO:
534 io = win->res;
535 io->name = "V3 PCI I/O";
536 v3->io_mem = io_base;
537 v3->io_bus_addr = io->start - win->offset;
538 dev_dbg(dev, "I/O window %pR, bus addr %pap\n",
539 io, &v3->io_bus_addr);
540 ret = devm_pci_remap_iospace(dev, io, io_base);
541 if (ret) {
542 dev_warn(dev,
543 "error %d: failed to map resource %pR\n",
544 ret, io);
545 return ret;
546 }
547 /* Setup window 2 - PCI I/O */
548 writel(v3_addr_to_lb_base2(v3->io_mem) |
549 V3_LB_BASE2_ENABLE,
550 v3->base + V3_LB_BASE2);
551 writew(v3_addr_to_lb_map2(v3->io_bus_addr),
552 v3->base + V3_LB_MAP2);
553 break;
554 case IORESOURCE_MEM:
555 mem = win->res;
556 if (mem->flags & IORESOURCE_PREFETCH) {
557 mem->name = "V3 PCI PRE-MEM";
558 v3->pre_mem = mem->start;
559 v3->pre_bus_addr = mem->start - win->offset;
560 dev_dbg(dev, "PREFETCHABLE MEM window %pR, bus addr %pap\n",
561 mem, &v3->pre_bus_addr);
562 if (resource_size(mem) != SZ_256M) {
563 dev_err(dev, "prefetchable memory range is not 256MB\n");
564 return -EINVAL;
565 }
566 if (v3->non_pre_mem &&
567 (mem->start != v3->non_pre_mem + SZ_256M)) {
568 dev_err(dev,
569 "prefetchable memory is not adjacent to non-prefetchable memory\n");
570 return -EINVAL;
571 }
572 /* Setup window 1 - PCI prefetchable memory */
573 writel(v3_addr_to_lb_base(v3->pre_mem) |
574 V3_LB_BASE_ADR_SIZE_256MB |
575 V3_LB_BASE_PREFETCH |
576 V3_LB_BASE_ENABLE,
577 v3->base + V3_LB_BASE1);
578 writew(v3_addr_to_lb_map(v3->pre_bus_addr) |
579 V3_LB_MAP_TYPE_MEM, /* Was V3_LB_MAP_TYPE_MEM_MULTIPLE */
580 v3->base + V3_LB_MAP1);
581 } else {
582 mem->name = "V3 PCI NON-PRE-MEM";
583 v3->non_pre_mem = mem->start;
584 v3->non_pre_bus_addr = mem->start - win->offset;
585 dev_dbg(dev, "NON-PREFETCHABLE MEM window %pR, bus addr %pap\n",
586 mem, &v3->non_pre_bus_addr);
587 if (resource_size(mem) != SZ_256M) {
588 dev_err(dev,
589 "non-prefetchable memory range is not 256MB\n");
590 return -EINVAL;
591 }
592 /* Setup window 0 - PCI non-prefetchable memory */
593 writel(v3_addr_to_lb_base(v3->non_pre_mem) |
594 V3_LB_BASE_ADR_SIZE_256MB |
595 V3_LB_BASE_ENABLE,
596 v3->base + V3_LB_BASE0);
597 writew(v3_addr_to_lb_map(v3->non_pre_bus_addr) |
598 V3_LB_MAP_TYPE_MEM,
599 v3->base + V3_LB_MAP0);
600 }
601 break;
602 case IORESOURCE_BUS:
603 dev_dbg(dev, "BUS %pR\n", win->res);
604 host->busnr = win->res->start;
605 break;
606 default:
607 dev_info(dev, "Unknown resource type %lu\n",
608 resource_type(win->res));
609 break;
610 }
611
612 return 0;
613 }
614
v3_get_dma_range_config(struct v3_pci * v3,struct of_pci_range * range,u32 * pci_base,u32 * pci_map)615 static int v3_get_dma_range_config(struct v3_pci *v3,
616 struct of_pci_range *range,
617 u32 *pci_base, u32 *pci_map)
618 {
619 struct device *dev = v3->dev;
620 u64 cpu_end = range->cpu_addr + range->size - 1;
621 u64 pci_end = range->pci_addr + range->size - 1;
622 u32 val;
623
624 if (range->pci_addr & ~V3_PCI_BASE_M_ADR_BASE) {
625 dev_err(dev, "illegal range, only PCI bits 31..20 allowed\n");
626 return -EINVAL;
627 }
628 val = ((u32)range->pci_addr) & V3_PCI_BASE_M_ADR_BASE;
629 *pci_base = val;
630
631 if (range->cpu_addr & ~V3_PCI_MAP_M_MAP_ADR) {
632 dev_err(dev, "illegal range, only CPU bits 31..20 allowed\n");
633 return -EINVAL;
634 }
635 val = ((u32)range->cpu_addr) & V3_PCI_MAP_M_MAP_ADR;
636
637 switch (range->size) {
638 case SZ_1M:
639 val |= V3_LB_BASE_ADR_SIZE_1MB;
640 break;
641 case SZ_2M:
642 val |= V3_LB_BASE_ADR_SIZE_2MB;
643 break;
644 case SZ_4M:
645 val |= V3_LB_BASE_ADR_SIZE_4MB;
646 break;
647 case SZ_8M:
648 val |= V3_LB_BASE_ADR_SIZE_8MB;
649 break;
650 case SZ_16M:
651 val |= V3_LB_BASE_ADR_SIZE_16MB;
652 break;
653 case SZ_32M:
654 val |= V3_LB_BASE_ADR_SIZE_32MB;
655 break;
656 case SZ_64M:
657 val |= V3_LB_BASE_ADR_SIZE_64MB;
658 break;
659 case SZ_128M:
660 val |= V3_LB_BASE_ADR_SIZE_128MB;
661 break;
662 case SZ_256M:
663 val |= V3_LB_BASE_ADR_SIZE_256MB;
664 break;
665 case SZ_512M:
666 val |= V3_LB_BASE_ADR_SIZE_512MB;
667 break;
668 case SZ_1G:
669 val |= V3_LB_BASE_ADR_SIZE_1GB;
670 break;
671 case SZ_2G:
672 val |= V3_LB_BASE_ADR_SIZE_2GB;
673 break;
674 default:
675 dev_err(v3->dev, "illegal dma memory chunk size\n");
676 return -EINVAL;
677 break;
678 }
679 val |= V3_PCI_MAP_M_REG_EN | V3_PCI_MAP_M_ENABLE;
680 *pci_map = val;
681
682 dev_dbg(dev,
683 "DMA MEM CPU: 0x%016llx -> 0x%016llx => "
684 "PCI: 0x%016llx -> 0x%016llx base %08x map %08x\n",
685 range->cpu_addr, cpu_end,
686 range->pci_addr, pci_end,
687 *pci_base, *pci_map);
688
689 return 0;
690 }
691
v3_pci_parse_map_dma_ranges(struct v3_pci * v3,struct device_node * np)692 static int v3_pci_parse_map_dma_ranges(struct v3_pci *v3,
693 struct device_node *np)
694 {
695 struct of_pci_range range;
696 struct of_pci_range_parser parser;
697 struct device *dev = v3->dev;
698 int i = 0;
699
700 if (of_pci_dma_range_parser_init(&parser, np)) {
701 dev_err(dev, "missing dma-ranges property\n");
702 return -EINVAL;
703 }
704
705 /*
706 * Get the dma-ranges from the device tree
707 */
708 for_each_of_pci_range(&parser, &range) {
709 int ret;
710 u32 pci_base, pci_map;
711
712 ret = v3_get_dma_range_config(v3, &range, &pci_base, &pci_map);
713 if (ret)
714 return ret;
715
716 if (i == 0) {
717 writel(pci_base, v3->base + V3_PCI_BASE0);
718 writel(pci_map, v3->base + V3_PCI_MAP0);
719 } else if (i == 1) {
720 writel(pci_base, v3->base + V3_PCI_BASE1);
721 writel(pci_map, v3->base + V3_PCI_MAP1);
722 } else {
723 dev_err(dev, "too many ranges, only two supported\n");
724 dev_err(dev, "range %d ignored\n", i);
725 }
726 i++;
727 }
728 return 0;
729 }
730
v3_pci_probe(struct platform_device * pdev)731 static int v3_pci_probe(struct platform_device *pdev)
732 {
733 struct device *dev = &pdev->dev;
734 struct device_node *np = dev->of_node;
735 resource_size_t io_base;
736 struct resource *regs;
737 struct resource_entry *win;
738 struct v3_pci *v3;
739 struct pci_host_bridge *host;
740 struct clk *clk;
741 u16 val;
742 int irq;
743 int ret;
744 LIST_HEAD(res);
745
746 host = pci_alloc_host_bridge(sizeof(*v3));
747 if (!host)
748 return -ENOMEM;
749
750 host->dev.parent = dev;
751 host->ops = &v3_pci_ops;
752 host->busnr = 0;
753 host->msi = NULL;
754 host->map_irq = of_irq_parse_and_map_pci;
755 host->swizzle_irq = pci_common_swizzle;
756 v3 = pci_host_bridge_priv(host);
757 host->sysdata = v3;
758 v3->dev = dev;
759
760 /* Get and enable host clock */
761 clk = devm_clk_get(dev, NULL);
762 if (IS_ERR(clk)) {
763 dev_err(dev, "clock not found\n");
764 return PTR_ERR(clk);
765 }
766 ret = clk_prepare_enable(clk);
767 if (ret) {
768 dev_err(dev, "unable to enable clock\n");
769 return ret;
770 }
771
772 regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
773 v3->base = devm_ioremap_resource(dev, regs);
774 if (IS_ERR(v3->base))
775 return PTR_ERR(v3->base);
776 /*
777 * The hardware has a register with the physical base address
778 * of the V3 controller itself, verify that this is the same
779 * as the physical memory we've remapped it from.
780 */
781 if (readl(v3->base + V3_LB_IO_BASE) != (regs->start >> 16))
782 dev_err(dev, "V3_LB_IO_BASE = %08x but device is @%pR\n",
783 readl(v3->base + V3_LB_IO_BASE), regs);
784
785 /* Configuration space is 16MB directly mapped */
786 regs = platform_get_resource(pdev, IORESOURCE_MEM, 1);
787 if (resource_size(regs) != SZ_16M) {
788 dev_err(dev, "config mem is not 16MB!\n");
789 return -EINVAL;
790 }
791 v3->config_mem = regs->start;
792 v3->config_base = devm_ioremap_resource(dev, regs);
793 if (IS_ERR(v3->config_base))
794 return PTR_ERR(v3->config_base);
795
796 ret = devm_of_pci_get_host_bridge_resources(dev, 0, 0xff, &res,
797 &io_base);
798 if (ret)
799 return ret;
800
801 ret = devm_request_pci_bus_resources(dev, &res);
802 if (ret)
803 return ret;
804
805 /* Get and request error IRQ resource */
806 irq = platform_get_irq(pdev, 0);
807 if (irq <= 0) {
808 dev_err(dev, "unable to obtain PCIv3 error IRQ\n");
809 return -ENODEV;
810 }
811 ret = devm_request_irq(dev, irq, v3_irq, 0,
812 "PCIv3 error", v3);
813 if (ret < 0) {
814 dev_err(dev,
815 "unable to request PCIv3 error IRQ %d (%d)\n",
816 irq, ret);
817 return ret;
818 }
819
820 /*
821 * Unlock V3 registers, but only if they were previously locked.
822 */
823 if (readw(v3->base + V3_SYSTEM) & V3_SYSTEM_M_LOCK)
824 writew(V3_SYSTEM_UNLOCK, v3->base + V3_SYSTEM);
825
826 /* Disable all slave access while we set up the windows */
827 val = readw(v3->base + V3_PCI_CMD);
828 val &= ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
829 writew(val, v3->base + V3_PCI_CMD);
830
831 /* Put the PCI bus into reset */
832 val = readw(v3->base + V3_SYSTEM);
833 val &= ~V3_SYSTEM_M_RST_OUT;
834 writew(val, v3->base + V3_SYSTEM);
835
836 /* Retry until we're ready */
837 val = readw(v3->base + V3_PCI_CFG);
838 val |= V3_PCI_CFG_M_RETRY_EN;
839 writew(val, v3->base + V3_PCI_CFG);
840
841 /* Set up the local bus protocol */
842 val = readw(v3->base + V3_LB_CFG);
843 val |= V3_LB_CFG_LB_BE_IMODE; /* Byte enable input */
844 val |= V3_LB_CFG_LB_BE_OMODE; /* Byte enable output */
845 val &= ~V3_LB_CFG_LB_ENDIAN; /* Little endian */
846 val &= ~V3_LB_CFG_LB_PPC_RDY; /* TODO: when using on PPC403Gx, set to 1 */
847 writew(val, v3->base + V3_LB_CFG);
848
849 /* Enable the PCI bus master */
850 val = readw(v3->base + V3_PCI_CMD);
851 val |= PCI_COMMAND_MASTER;
852 writew(val, v3->base + V3_PCI_CMD);
853
854 /* Get the I/O and memory ranges from DT */
855 resource_list_for_each_entry(win, &res) {
856 ret = v3_pci_setup_resource(v3, io_base, host, win);
857 if (ret) {
858 dev_err(dev, "error setting up resources\n");
859 return ret;
860 }
861 }
862 ret = v3_pci_parse_map_dma_ranges(v3, np);
863 if (ret)
864 return ret;
865
866 /*
867 * Disable PCI to host IO cycles, enable I/O buffers @3.3V,
868 * set AD_LOW0 to 1 if one of the LB_MAP registers choose
869 * to use this (should be unused).
870 */
871 writel(0x00000000, v3->base + V3_PCI_IO_BASE);
872 val = V3_PCI_CFG_M_IO_REG_DIS | V3_PCI_CFG_M_IO_DIS |
873 V3_PCI_CFG_M_EN3V | V3_PCI_CFG_M_AD_LOW0;
874 /*
875 * DMA read and write from PCI bus commands types
876 */
877 val |= V3_PCI_CFG_TYPE_DEFAULT << V3_PCI_CFG_M_RTYPE_SHIFT;
878 val |= V3_PCI_CFG_TYPE_DEFAULT << V3_PCI_CFG_M_WTYPE_SHIFT;
879 writew(val, v3->base + V3_PCI_CFG);
880
881 /*
882 * Set the V3 FIFO such that writes have higher priority than
883 * reads, and local bus write causes local bus read fifo flush
884 * on aperture 1. Same for PCI.
885 */
886 writew(V3_FIFO_PRIO_LB_RD1_FLUSH_AP1 |
887 V3_FIFO_PRIO_LB_RD0_FLUSH_AP1 |
888 V3_FIFO_PRIO_PCI_RD1_FLUSH_AP1 |
889 V3_FIFO_PRIO_PCI_RD0_FLUSH_AP1,
890 v3->base + V3_FIFO_PRIORITY);
891
892
893 /*
894 * Clear any error interrupts, and enable parity and write error
895 * interrupts
896 */
897 writeb(0, v3->base + V3_LB_ISTAT);
898 val = readw(v3->base + V3_LB_CFG);
899 val |= V3_LB_CFG_LB_LB_INT;
900 writew(val, v3->base + V3_LB_CFG);
901 writeb(V3_LB_ISTAT_PCI_WR | V3_LB_ISTAT_PCI_PERR,
902 v3->base + V3_LB_IMASK);
903
904 /* Special Integrator initialization */
905 if (of_device_is_compatible(np, "arm,integrator-ap-pci")) {
906 ret = v3_integrator_init(v3);
907 if (ret)
908 return ret;
909 }
910
911 /* Post-init: enable PCI memory and invalidate (master already on) */
912 val = readw(v3->base + V3_PCI_CMD);
913 val |= PCI_COMMAND_MEMORY | PCI_COMMAND_INVALIDATE;
914 writew(val, v3->base + V3_PCI_CMD);
915
916 /* Clear pending interrupts */
917 writeb(0, v3->base + V3_LB_ISTAT);
918 /* Read or write errors and parity errors cause interrupts */
919 writeb(V3_LB_ISTAT_PCI_RD | V3_LB_ISTAT_PCI_WR | V3_LB_ISTAT_PCI_PERR,
920 v3->base + V3_LB_IMASK);
921
922 /* Take the PCI bus out of reset so devices can initialize */
923 val = readw(v3->base + V3_SYSTEM);
924 val |= V3_SYSTEM_M_RST_OUT;
925 writew(val, v3->base + V3_SYSTEM);
926
927 /*
928 * Re-lock the system register.
929 */
930 val = readw(v3->base + V3_SYSTEM);
931 val |= V3_SYSTEM_M_LOCK;
932 writew(val, v3->base + V3_SYSTEM);
933
934 list_splice_init(&res, &host->windows);
935 ret = pci_scan_root_bus_bridge(host);
936 if (ret) {
937 dev_err(dev, "failed to register host: %d\n", ret);
938 return ret;
939 }
940 v3->bus = host->bus;
941
942 pci_bus_assign_resources(v3->bus);
943 pci_bus_add_devices(v3->bus);
944
945 return 0;
946 }
947
948 static const struct of_device_id v3_pci_of_match[] = {
949 {
950 .compatible = "v3,v360epc-pci",
951 },
952 {},
953 };
954
955 static struct platform_driver v3_pci_driver = {
956 .driver = {
957 .name = "pci-v3-semi",
958 .of_match_table = of_match_ptr(v3_pci_of_match),
959 .suppress_bind_attrs = true,
960 },
961 .probe = v3_pci_probe,
962 };
963 builtin_platform_driver(v3_pci_driver);
964