1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 * ov2685 driver
4 *
5 * Copyright (C) 2017 Fuzhou Rockchip Electronics Co., Ltd.
6 */
7
8 #include <linux/clk.h>
9 #include <linux/device.h>
10 #include <linux/delay.h>
11 #include <linux/gpio/consumer.h>
12 #include <linux/i2c.h>
13 #include <linux/module.h>
14 #include <linux/pm_runtime.h>
15 #include <linux/regulator/consumer.h>
16 #include <linux/sysfs.h>
17 #include <media/media-entity.h>
18 #include <media/v4l2-async.h>
19 #include <media/v4l2-ctrls.h>
20 #include <media/v4l2-fwnode.h>
21 #include <media/v4l2-subdev.h>
22
23 #define CHIP_ID 0x2685
24 #define OV2685_REG_CHIP_ID 0x300a
25
26 #define OV2685_XVCLK_FREQ 24000000
27
28 #define REG_SC_CTRL_MODE 0x0100
29 #define SC_CTRL_MODE_STANDBY 0x0
30 #define SC_CTRL_MODE_STREAMING BIT(0)
31
32 #define OV2685_REG_EXPOSURE 0x3500
33 #define OV2685_EXPOSURE_MIN 4
34 #define OV2685_EXPOSURE_STEP 1
35
36 #define OV2685_REG_VTS 0x380e
37 #define OV2685_VTS_MAX 0x7fff
38
39 #define OV2685_REG_GAIN 0x350a
40 #define OV2685_GAIN_MIN 0
41 #define OV2685_GAIN_MAX 0x07ff
42 #define OV2685_GAIN_STEP 0x1
43 #define OV2685_GAIN_DEFAULT 0x0036
44
45 #define OV2685_REG_TEST_PATTERN 0x5080
46 #define OV2685_TEST_PATTERN_DISABLED 0x00
47 #define OV2685_TEST_PATTERN_COLOR_BAR 0x80
48 #define OV2685_TEST_PATTERN_RANDOM 0x81
49 #define OV2685_TEST_PATTERN_COLOR_BAR_FADE 0x88
50 #define OV2685_TEST_PATTERN_BW_SQUARE 0x92
51 #define OV2685_TEST_PATTERN_COLOR_SQUARE 0x82
52
53 #define REG_NULL 0xFFFF
54
55 #define OV2685_REG_VALUE_08BIT 1
56 #define OV2685_REG_VALUE_16BIT 2
57 #define OV2685_REG_VALUE_24BIT 3
58
59 #define OV2685_NATIVE_WIDTH 1616
60 #define OV2685_NATIVE_HEIGHT 1216
61
62 #define OV2685_LANES 1
63 #define OV2685_BITS_PER_SAMPLE 10
64
65 static const char * const ov2685_supply_names[] = {
66 "avdd", /* Analog power */
67 "dovdd", /* Digital I/O power */
68 "dvdd", /* Digital core power */
69 };
70
71 #define OV2685_NUM_SUPPLIES ARRAY_SIZE(ov2685_supply_names)
72
73 struct regval {
74 u16 addr;
75 u8 val;
76 };
77
78 struct ov2685_mode {
79 u32 width;
80 u32 height;
81 u32 exp_def;
82 u32 hts_def;
83 u32 vts_def;
84 const struct v4l2_rect *analog_crop;
85 const struct regval *reg_list;
86 };
87
88 struct ov2685 {
89 struct i2c_client *client;
90 struct clk *xvclk;
91 struct gpio_desc *reset_gpio;
92 struct regulator_bulk_data supplies[OV2685_NUM_SUPPLIES];
93
94 bool streaming;
95 struct mutex mutex;
96 struct v4l2_subdev subdev;
97 struct media_pad pad;
98 struct v4l2_ctrl *anal_gain;
99 struct v4l2_ctrl *exposure;
100 struct v4l2_ctrl *hblank;
101 struct v4l2_ctrl *vblank;
102 struct v4l2_ctrl *test_pattern;
103 struct v4l2_ctrl_handler ctrl_handler;
104
105 const struct ov2685_mode *cur_mode;
106 };
107
108 #define to_ov2685(sd) container_of(sd, struct ov2685, subdev)
109
110 /* PLL settings bases on 24M xvclk */
111 static struct regval ov2685_1600x1200_regs[] = {
112 {0x0103, 0x01},
113 {0x0100, 0x00},
114 {0x3002, 0x00},
115 {0x3016, 0x1c},
116 {0x3018, 0x44},
117 {0x301d, 0xf0},
118 {0x3020, 0x00},
119 {0x3082, 0x37},
120 {0x3083, 0x03},
121 {0x3084, 0x09},
122 {0x3085, 0x04},
123 {0x3086, 0x00},
124 {0x3087, 0x00},
125 {0x3501, 0x4e},
126 {0x3502, 0xe0},
127 {0x3503, 0x27},
128 {0x350b, 0x36},
129 {0x3600, 0xb4},
130 {0x3603, 0x35},
131 {0x3604, 0x24},
132 {0x3605, 0x00},
133 {0x3620, 0x24},
134 {0x3621, 0x34},
135 {0x3622, 0x03},
136 {0x3628, 0x10},
137 {0x3705, 0x3c},
138 {0x370a, 0x21},
139 {0x370c, 0x50},
140 {0x370d, 0xc0},
141 {0x3717, 0x58},
142 {0x3718, 0x80},
143 {0x3720, 0x00},
144 {0x3721, 0x09},
145 {0x3722, 0x06},
146 {0x3723, 0x59},
147 {0x3738, 0x99},
148 {0x3781, 0x80},
149 {0x3784, 0x0c},
150 {0x3789, 0x60},
151 {0x3800, 0x00},
152 {0x3801, 0x00},
153 {0x3802, 0x00},
154 {0x3803, 0x00},
155 {0x3804, 0x06},
156 {0x3805, 0x4f},
157 {0x3806, 0x04},
158 {0x3807, 0xbf},
159 {0x3808, 0x06},
160 {0x3809, 0x40},
161 {0x380a, 0x04},
162 {0x380b, 0xb0},
163 {0x380c, 0x06},
164 {0x380d, 0xa4},
165 {0x380e, 0x05},
166 {0x380f, 0x0e},
167 {0x3810, 0x00},
168 {0x3811, 0x08},
169 {0x3812, 0x00},
170 {0x3813, 0x08},
171 {0x3814, 0x11},
172 {0x3815, 0x11},
173 {0x3819, 0x04},
174 {0x3820, 0xc0},
175 {0x3821, 0x00},
176 {0x3a06, 0x01},
177 {0x3a07, 0x84},
178 {0x3a08, 0x01},
179 {0x3a09, 0x43},
180 {0x3a0a, 0x24},
181 {0x3a0b, 0x60},
182 {0x3a0c, 0x28},
183 {0x3a0d, 0x60},
184 {0x3a0e, 0x04},
185 {0x3a0f, 0x8c},
186 {0x3a10, 0x05},
187 {0x3a11, 0x0c},
188 {0x4000, 0x81},
189 {0x4001, 0x40},
190 {0x4008, 0x02},
191 {0x4009, 0x09},
192 {0x4300, 0x00},
193 {0x430e, 0x00},
194 {0x4602, 0x02},
195 {0x481b, 0x40},
196 {0x481f, 0x40},
197 {0x4837, 0x18},
198 {0x5000, 0x1f},
199 {0x5001, 0x05},
200 {0x5002, 0x30},
201 {0x5003, 0x04},
202 {0x5004, 0x00},
203 {0x5005, 0x0c},
204 {0x5280, 0x15},
205 {0x5281, 0x06},
206 {0x5282, 0x06},
207 {0x5283, 0x08},
208 {0x5284, 0x1c},
209 {0x5285, 0x1c},
210 {0x5286, 0x20},
211 {0x5287, 0x10},
212 {REG_NULL, 0x00}
213 };
214
215 #define OV2685_LINK_FREQ_330MHZ 330000000
216 static const s64 link_freq_menu_items[] = {
217 OV2685_LINK_FREQ_330MHZ
218 };
219
220 static const char * const ov2685_test_pattern_menu[] = {
221 "Disabled",
222 "Color Bar",
223 "Color Bar FADE",
224 "Random Data",
225 "Black White Square",
226 "Color Square"
227 };
228
229 static const int ov2685_test_pattern_val[] = {
230 OV2685_TEST_PATTERN_DISABLED,
231 OV2685_TEST_PATTERN_COLOR_BAR,
232 OV2685_TEST_PATTERN_COLOR_BAR_FADE,
233 OV2685_TEST_PATTERN_RANDOM,
234 OV2685_TEST_PATTERN_BW_SQUARE,
235 OV2685_TEST_PATTERN_COLOR_SQUARE,
236 };
237
238 static const struct v4l2_rect ov2685_analog_crop = {
239 .left = 8,
240 .top = 8,
241 .width = 1600,
242 .height = 1200,
243 };
244
245 static const struct ov2685_mode supported_modes[] = {
246 {
247 .width = 1600,
248 .height = 1200,
249 .exp_def = 0x04ee,
250 .hts_def = 0x06a4,
251 .vts_def = 0x050e,
252 .analog_crop = &ov2685_analog_crop,
253 .reg_list = ov2685_1600x1200_regs,
254 },
255 };
256
257 /* Write registers up to 4 at a time */
ov2685_write_reg(struct i2c_client * client,u16 reg,u32 len,u32 val)258 static int ov2685_write_reg(struct i2c_client *client, u16 reg,
259 u32 len, u32 val)
260 {
261 u32 val_i, buf_i;
262 u8 buf[6];
263 u8 *val_p;
264 __be32 val_be;
265
266 if (len > 4)
267 return -EINVAL;
268
269 buf[0] = reg >> 8;
270 buf[1] = reg & 0xff;
271
272 val_be = cpu_to_be32(val);
273 val_p = (u8 *)&val_be;
274 buf_i = 2;
275 val_i = 4 - len;
276
277 while (val_i < 4)
278 buf[buf_i++] = val_p[val_i++];
279
280 if (i2c_master_send(client, buf, len + 2) != len + 2)
281 return -EIO;
282
283 return 0;
284 }
285
ov2685_write_array(struct i2c_client * client,const struct regval * regs)286 static int ov2685_write_array(struct i2c_client *client,
287 const struct regval *regs)
288 {
289 int ret = 0;
290 u32 i;
291
292 for (i = 0; ret == 0 && regs[i].addr != REG_NULL; i++)
293 ret = ov2685_write_reg(client, regs[i].addr,
294 OV2685_REG_VALUE_08BIT, regs[i].val);
295
296 return ret;
297 }
298
299 /* Read registers up to 4 at a time */
ov2685_read_reg(struct i2c_client * client,u16 reg,u32 len,u32 * val)300 static int ov2685_read_reg(struct i2c_client *client, u16 reg,
301 u32 len, u32 *val)
302 {
303 struct i2c_msg msgs[2];
304 u8 *data_be_p;
305 __be32 data_be = 0;
306 __be16 reg_addr_be = cpu_to_be16(reg);
307 int ret;
308
309 if (len > 4)
310 return -EINVAL;
311
312 data_be_p = (u8 *)&data_be;
313 /* Write register address */
314 msgs[0].addr = client->addr;
315 msgs[0].flags = 0;
316 msgs[0].len = 2;
317 msgs[0].buf = (u8 *)®_addr_be;
318
319 /* Read data from register */
320 msgs[1].addr = client->addr;
321 msgs[1].flags = I2C_M_RD;
322 msgs[1].len = len;
323 msgs[1].buf = &data_be_p[4 - len];
324
325 ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
326 if (ret != ARRAY_SIZE(msgs))
327 return -EIO;
328
329 *val = be32_to_cpu(data_be);
330
331 return 0;
332 }
333
ov2685_fill_fmt(const struct ov2685_mode * mode,struct v4l2_mbus_framefmt * fmt)334 static void ov2685_fill_fmt(const struct ov2685_mode *mode,
335 struct v4l2_mbus_framefmt *fmt)
336 {
337 fmt->code = MEDIA_BUS_FMT_SBGGR10_1X10;
338 fmt->width = mode->width;
339 fmt->height = mode->height;
340 fmt->field = V4L2_FIELD_NONE;
341 }
342
ov2685_set_fmt(struct v4l2_subdev * sd,struct v4l2_subdev_state * sd_state,struct v4l2_subdev_format * fmt)343 static int ov2685_set_fmt(struct v4l2_subdev *sd,
344 struct v4l2_subdev_state *sd_state,
345 struct v4l2_subdev_format *fmt)
346 {
347 struct ov2685 *ov2685 = to_ov2685(sd);
348 struct v4l2_mbus_framefmt *mbus_fmt = &fmt->format;
349
350 /* only one mode supported for now */
351 ov2685_fill_fmt(ov2685->cur_mode, mbus_fmt);
352
353 return 0;
354 }
355
ov2685_get_fmt(struct v4l2_subdev * sd,struct v4l2_subdev_state * sd_state,struct v4l2_subdev_format * fmt)356 static int ov2685_get_fmt(struct v4l2_subdev *sd,
357 struct v4l2_subdev_state *sd_state,
358 struct v4l2_subdev_format *fmt)
359 {
360 struct ov2685 *ov2685 = to_ov2685(sd);
361 struct v4l2_mbus_framefmt *mbus_fmt = &fmt->format;
362
363 ov2685_fill_fmt(ov2685->cur_mode, mbus_fmt);
364
365 return 0;
366 }
367
ov2685_enum_mbus_code(struct v4l2_subdev * sd,struct v4l2_subdev_state * sd_state,struct v4l2_subdev_mbus_code_enum * code)368 static int ov2685_enum_mbus_code(struct v4l2_subdev *sd,
369 struct v4l2_subdev_state *sd_state,
370 struct v4l2_subdev_mbus_code_enum *code)
371 {
372 if (code->index >= ARRAY_SIZE(supported_modes))
373 return -EINVAL;
374
375 code->code = MEDIA_BUS_FMT_SBGGR10_1X10;
376
377 return 0;
378 }
379
ov2685_enum_frame_sizes(struct v4l2_subdev * sd,struct v4l2_subdev_state * sd_state,struct v4l2_subdev_frame_size_enum * fse)380 static int ov2685_enum_frame_sizes(struct v4l2_subdev *sd,
381 struct v4l2_subdev_state *sd_state,
382 struct v4l2_subdev_frame_size_enum *fse)
383 {
384 int index = fse->index;
385
386 if (index >= ARRAY_SIZE(supported_modes))
387 return -EINVAL;
388
389 fse->code = MEDIA_BUS_FMT_SBGGR10_1X10;
390
391 fse->min_width = supported_modes[index].width;
392 fse->max_width = supported_modes[index].width;
393 fse->max_height = supported_modes[index].height;
394 fse->min_height = supported_modes[index].height;
395
396 return 0;
397 }
398
399 static const struct v4l2_rect *
__ov2685_get_pad_crop(struct ov2685 * ov2685,struct v4l2_subdev_state * state,unsigned int pad,enum v4l2_subdev_format_whence which)400 __ov2685_get_pad_crop(struct ov2685 *ov2685,
401 struct v4l2_subdev_state *state, unsigned int pad,
402 enum v4l2_subdev_format_whence which)
403 {
404 const struct ov2685_mode *mode = ov2685->cur_mode;
405
406 switch (which) {
407 case V4L2_SUBDEV_FORMAT_TRY:
408 return v4l2_subdev_get_try_crop(&ov2685->subdev, state, pad);
409 case V4L2_SUBDEV_FORMAT_ACTIVE:
410 return mode->analog_crop;
411 }
412
413 return NULL;
414 }
415
ov2685_get_selection(struct v4l2_subdev * sd,struct v4l2_subdev_state * sd_state,struct v4l2_subdev_selection * sel)416 static int ov2685_get_selection(struct v4l2_subdev *sd,
417 struct v4l2_subdev_state *sd_state,
418 struct v4l2_subdev_selection *sel)
419 {
420 struct ov2685 *ov2685 = to_ov2685(sd);
421
422 switch (sel->target) {
423 case V4L2_SEL_TGT_CROP:
424 mutex_lock(&ov2685->mutex);
425 sel->r = *__ov2685_get_pad_crop(ov2685, sd_state, sel->pad,
426 sel->which);
427 mutex_unlock(&ov2685->mutex);
428 break;
429 case V4L2_SEL_TGT_NATIVE_SIZE:
430 case V4L2_SEL_TGT_CROP_BOUNDS:
431 sel->r.top = 0;
432 sel->r.left = 0;
433 sel->r.width = OV2685_NATIVE_WIDTH;
434 sel->r.height = OV2685_NATIVE_HEIGHT;
435 break;
436 case V4L2_SEL_TGT_CROP_DEFAULT:
437 sel->r = ov2685_analog_crop;
438 break;
439 default:
440 return -EINVAL;
441 }
442
443 return 0;
444 }
445
446 /* Calculate the delay in us by clock rate and clock cycles */
ov2685_cal_delay(u32 cycles)447 static inline u32 ov2685_cal_delay(u32 cycles)
448 {
449 return DIV_ROUND_UP(cycles, OV2685_XVCLK_FREQ / 1000 / 1000);
450 }
451
__ov2685_power_on(struct ov2685 * ov2685)452 static int __ov2685_power_on(struct ov2685 *ov2685)
453 {
454 int ret;
455 u32 delay_us;
456 struct device *dev = &ov2685->client->dev;
457
458 ret = clk_prepare_enable(ov2685->xvclk);
459 if (ret < 0) {
460 dev_err(dev, "Failed to enable xvclk\n");
461 return ret;
462 }
463
464 gpiod_set_value_cansleep(ov2685->reset_gpio, 1);
465
466 ret = regulator_bulk_enable(OV2685_NUM_SUPPLIES, ov2685->supplies);
467 if (ret < 0) {
468 dev_err(dev, "Failed to enable regulators\n");
469 goto disable_clk;
470 }
471
472 /* The minimum delay between power supplies and reset rising can be 0 */
473 gpiod_set_value_cansleep(ov2685->reset_gpio, 0);
474 /* 8192 xvclk cycles prior to the first SCCB transaction */
475 delay_us = ov2685_cal_delay(8192);
476 usleep_range(delay_us, delay_us * 2);
477
478 /* HACK: ov2685 would output messy data after reset(R0103),
479 * writing register before .s_stream() as a workaround
480 */
481 ret = ov2685_write_array(ov2685->client, ov2685->cur_mode->reg_list);
482 if (ret) {
483 dev_err(dev, "Failed to set regs for power on\n");
484 goto disable_supplies;
485 }
486
487 return 0;
488
489 disable_supplies:
490 regulator_bulk_disable(OV2685_NUM_SUPPLIES, ov2685->supplies);
491 disable_clk:
492 clk_disable_unprepare(ov2685->xvclk);
493
494 return ret;
495 }
496
__ov2685_power_off(struct ov2685 * ov2685)497 static void __ov2685_power_off(struct ov2685 *ov2685)
498 {
499 /* 512 xvclk cycles after the last SCCB transaction or MIPI frame end */
500 u32 delay_us = ov2685_cal_delay(512);
501
502 usleep_range(delay_us, delay_us * 2);
503 clk_disable_unprepare(ov2685->xvclk);
504 gpiod_set_value_cansleep(ov2685->reset_gpio, 1);
505 regulator_bulk_disable(OV2685_NUM_SUPPLIES, ov2685->supplies);
506 }
507
ov2685_s_stream(struct v4l2_subdev * sd,int on)508 static int ov2685_s_stream(struct v4l2_subdev *sd, int on)
509 {
510 struct ov2685 *ov2685 = to_ov2685(sd);
511 struct i2c_client *client = ov2685->client;
512 int ret = 0;
513
514 mutex_lock(&ov2685->mutex);
515
516 on = !!on;
517 if (on == ov2685->streaming)
518 goto unlock_and_return;
519
520 if (on) {
521 ret = pm_runtime_resume_and_get(&ov2685->client->dev);
522 if (ret < 0)
523 goto unlock_and_return;
524
525 ret = __v4l2_ctrl_handler_setup(&ov2685->ctrl_handler);
526 if (ret) {
527 pm_runtime_put(&client->dev);
528 goto unlock_and_return;
529 }
530 ret = ov2685_write_reg(client, REG_SC_CTRL_MODE,
531 OV2685_REG_VALUE_08BIT, SC_CTRL_MODE_STREAMING);
532 if (ret) {
533 pm_runtime_put(&client->dev);
534 goto unlock_and_return;
535 }
536 } else {
537 ov2685_write_reg(client, REG_SC_CTRL_MODE,
538 OV2685_REG_VALUE_08BIT, SC_CTRL_MODE_STANDBY);
539 pm_runtime_put(&ov2685->client->dev);
540 }
541
542 ov2685->streaming = on;
543
544 unlock_and_return:
545 mutex_unlock(&ov2685->mutex);
546
547 return ret;
548 }
549
550 #ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
ov2685_open(struct v4l2_subdev * sd,struct v4l2_subdev_fh * fh)551 static int ov2685_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
552 {
553 struct ov2685 *ov2685 = to_ov2685(sd);
554 struct v4l2_mbus_framefmt *try_fmt;
555
556 mutex_lock(&ov2685->mutex);
557
558 try_fmt = v4l2_subdev_get_try_format(sd, fh->state, 0);
559 /* Initialize try_fmt */
560 ov2685_fill_fmt(&supported_modes[0], try_fmt);
561
562 mutex_unlock(&ov2685->mutex);
563
564 return 0;
565 }
566 #endif
567
ov2685_runtime_resume(struct device * dev)568 static int __maybe_unused ov2685_runtime_resume(struct device *dev)
569 {
570 struct v4l2_subdev *sd = dev_get_drvdata(dev);
571 struct ov2685 *ov2685 = to_ov2685(sd);
572
573 return __ov2685_power_on(ov2685);
574 }
575
ov2685_runtime_suspend(struct device * dev)576 static int __maybe_unused ov2685_runtime_suspend(struct device *dev)
577 {
578 struct v4l2_subdev *sd = dev_get_drvdata(dev);
579 struct ov2685 *ov2685 = to_ov2685(sd);
580
581 __ov2685_power_off(ov2685);
582
583 return 0;
584 }
585
586 static const struct dev_pm_ops ov2685_pm_ops = {
587 SET_RUNTIME_PM_OPS(ov2685_runtime_suspend,
588 ov2685_runtime_resume, NULL)
589 };
590
ov2685_set_ctrl(struct v4l2_ctrl * ctrl)591 static int ov2685_set_ctrl(struct v4l2_ctrl *ctrl)
592 {
593 struct ov2685 *ov2685 = container_of(ctrl->handler,
594 struct ov2685, ctrl_handler);
595 struct i2c_client *client = ov2685->client;
596 s64 max_expo;
597 int ret;
598
599 /* Propagate change of current control to all related controls */
600 switch (ctrl->id) {
601 case V4L2_CID_VBLANK:
602 /* Update max exposure while meeting expected vblanking */
603 max_expo = ov2685->cur_mode->height + ctrl->val - 4;
604 __v4l2_ctrl_modify_range(ov2685->exposure,
605 ov2685->exposure->minimum, max_expo,
606 ov2685->exposure->step,
607 ov2685->exposure->default_value);
608 break;
609 }
610
611 if (!pm_runtime_get_if_in_use(&client->dev))
612 return 0;
613
614 switch (ctrl->id) {
615 case V4L2_CID_EXPOSURE:
616 ret = ov2685_write_reg(ov2685->client, OV2685_REG_EXPOSURE,
617 OV2685_REG_VALUE_24BIT, ctrl->val << 4);
618 break;
619 case V4L2_CID_ANALOGUE_GAIN:
620 ret = ov2685_write_reg(ov2685->client, OV2685_REG_GAIN,
621 OV2685_REG_VALUE_16BIT, ctrl->val);
622 break;
623 case V4L2_CID_VBLANK:
624 ret = ov2685_write_reg(ov2685->client, OV2685_REG_VTS,
625 OV2685_REG_VALUE_16BIT,
626 ctrl->val + ov2685->cur_mode->height);
627 break;
628 case V4L2_CID_TEST_PATTERN:
629 ret = ov2685_write_reg(ov2685->client, OV2685_REG_TEST_PATTERN,
630 OV2685_REG_VALUE_08BIT,
631 ov2685_test_pattern_val[ctrl->val]);
632 break;
633 default:
634 dev_warn(&client->dev, "%s Unhandled id:0x%x, val:0x%x\n",
635 __func__, ctrl->id, ctrl->val);
636 ret = -EINVAL;
637 break;
638 }
639
640 pm_runtime_put(&client->dev);
641
642 return ret;
643 }
644
645 static const struct v4l2_subdev_video_ops ov2685_video_ops = {
646 .s_stream = ov2685_s_stream,
647 };
648
649 static const struct v4l2_subdev_pad_ops ov2685_pad_ops = {
650 .enum_mbus_code = ov2685_enum_mbus_code,
651 .enum_frame_size = ov2685_enum_frame_sizes,
652 .get_fmt = ov2685_get_fmt,
653 .set_fmt = ov2685_set_fmt,
654 .get_selection = ov2685_get_selection,
655 .set_selection = ov2685_get_selection,
656 };
657
658 static const struct v4l2_subdev_ops ov2685_subdev_ops = {
659 .video = &ov2685_video_ops,
660 .pad = &ov2685_pad_ops,
661 };
662
663 #ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
664 static const struct v4l2_subdev_internal_ops ov2685_internal_ops = {
665 .open = ov2685_open,
666 };
667 #endif
668
669 static const struct v4l2_ctrl_ops ov2685_ctrl_ops = {
670 .s_ctrl = ov2685_set_ctrl,
671 };
672
ov2685_initialize_controls(struct ov2685 * ov2685)673 static int ov2685_initialize_controls(struct ov2685 *ov2685)
674 {
675 const struct ov2685_mode *mode;
676 struct v4l2_ctrl_handler *handler;
677 struct v4l2_ctrl *ctrl;
678 struct v4l2_fwnode_device_properties props;
679 u64 exposure_max;
680 u32 pixel_rate, h_blank;
681 int ret;
682
683 handler = &ov2685->ctrl_handler;
684 mode = ov2685->cur_mode;
685 ret = v4l2_ctrl_handler_init(handler, 10);
686 if (ret)
687 return ret;
688 handler->lock = &ov2685->mutex;
689
690 ctrl = v4l2_ctrl_new_int_menu(handler, NULL, V4L2_CID_LINK_FREQ,
691 0, 0, link_freq_menu_items);
692 if (ctrl)
693 ctrl->flags |= V4L2_CTRL_FLAG_READ_ONLY;
694
695 pixel_rate = (link_freq_menu_items[0] * 2 * OV2685_LANES) /
696 OV2685_BITS_PER_SAMPLE;
697 v4l2_ctrl_new_std(handler, NULL, V4L2_CID_PIXEL_RATE,
698 0, pixel_rate, 1, pixel_rate);
699
700 h_blank = mode->hts_def - mode->width;
701 ov2685->hblank = v4l2_ctrl_new_std(handler, NULL, V4L2_CID_HBLANK,
702 h_blank, h_blank, 1, h_blank);
703 if (ov2685->hblank)
704 ov2685->hblank->flags |= V4L2_CTRL_FLAG_READ_ONLY;
705
706 ov2685->vblank = v4l2_ctrl_new_std(handler, &ov2685_ctrl_ops,
707 V4L2_CID_VBLANK, mode->vts_def - mode->height,
708 OV2685_VTS_MAX - mode->height, 1,
709 mode->vts_def - mode->height);
710
711 exposure_max = mode->vts_def - 4;
712 ov2685->exposure = v4l2_ctrl_new_std(handler, &ov2685_ctrl_ops,
713 V4L2_CID_EXPOSURE, OV2685_EXPOSURE_MIN,
714 exposure_max, OV2685_EXPOSURE_STEP,
715 mode->exp_def);
716
717 ov2685->anal_gain = v4l2_ctrl_new_std(handler, &ov2685_ctrl_ops,
718 V4L2_CID_ANALOGUE_GAIN, OV2685_GAIN_MIN,
719 OV2685_GAIN_MAX, OV2685_GAIN_STEP,
720 OV2685_GAIN_DEFAULT);
721
722 ov2685->test_pattern = v4l2_ctrl_new_std_menu_items(handler,
723 &ov2685_ctrl_ops, V4L2_CID_TEST_PATTERN,
724 ARRAY_SIZE(ov2685_test_pattern_menu) - 1,
725 0, 0, ov2685_test_pattern_menu);
726
727 /* set properties from fwnode (e.g. rotation, orientation) */
728 ret = v4l2_fwnode_device_parse(&ov2685->client->dev, &props);
729 if (ret)
730 goto err_free_handler;
731
732 ret = v4l2_ctrl_new_fwnode_properties(handler, &ov2685_ctrl_ops, &props);
733 if (ret)
734 goto err_free_handler;
735
736 if (handler->error) {
737 ret = handler->error;
738 dev_err(&ov2685->client->dev,
739 "Failed to init controls(%d)\n", ret);
740 goto err_free_handler;
741 }
742
743 ov2685->subdev.ctrl_handler = handler;
744
745 return 0;
746
747 err_free_handler:
748 v4l2_ctrl_handler_free(handler);
749
750 return ret;
751 }
752
ov2685_check_sensor_id(struct ov2685 * ov2685,struct i2c_client * client)753 static int ov2685_check_sensor_id(struct ov2685 *ov2685,
754 struct i2c_client *client)
755 {
756 struct device *dev = &ov2685->client->dev;
757 int ret;
758 u32 id = 0;
759
760 ret = ov2685_read_reg(client, OV2685_REG_CHIP_ID,
761 OV2685_REG_VALUE_16BIT, &id);
762 if (id != CHIP_ID) {
763 dev_err(dev, "Unexpected sensor id(%04x), ret(%d)\n", id, ret);
764 return ret;
765 }
766
767 dev_info(dev, "Detected OV%04x sensor\n", CHIP_ID);
768
769 return 0;
770 }
771
ov2685_configure_regulators(struct ov2685 * ov2685)772 static int ov2685_configure_regulators(struct ov2685 *ov2685)
773 {
774 int i;
775
776 for (i = 0; i < OV2685_NUM_SUPPLIES; i++)
777 ov2685->supplies[i].supply = ov2685_supply_names[i];
778
779 return devm_regulator_bulk_get(&ov2685->client->dev,
780 OV2685_NUM_SUPPLIES,
781 ov2685->supplies);
782 }
783
ov2685_probe(struct i2c_client * client)784 static int ov2685_probe(struct i2c_client *client)
785 {
786 struct device *dev = &client->dev;
787 struct ov2685 *ov2685;
788 int ret;
789
790 ov2685 = devm_kzalloc(dev, sizeof(*ov2685), GFP_KERNEL);
791 if (!ov2685)
792 return -ENOMEM;
793
794 ov2685->client = client;
795 ov2685->cur_mode = &supported_modes[0];
796
797 ov2685->xvclk = devm_clk_get(dev, "xvclk");
798 if (IS_ERR(ov2685->xvclk)) {
799 dev_err(dev, "Failed to get xvclk\n");
800 return -EINVAL;
801 }
802 ret = clk_set_rate(ov2685->xvclk, OV2685_XVCLK_FREQ);
803 if (ret < 0) {
804 dev_err(dev, "Failed to set xvclk rate (24MHz)\n");
805 return ret;
806 }
807 if (clk_get_rate(ov2685->xvclk) != OV2685_XVCLK_FREQ)
808 dev_warn(dev, "xvclk mismatched, modes are based on 24MHz\n");
809
810 ov2685->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
811 if (IS_ERR(ov2685->reset_gpio)) {
812 dev_err(dev, "Failed to get reset-gpios\n");
813 return -EINVAL;
814 }
815
816 ret = ov2685_configure_regulators(ov2685);
817 if (ret) {
818 dev_err(dev, "Failed to get power regulators\n");
819 return ret;
820 }
821
822 mutex_init(&ov2685->mutex);
823 v4l2_i2c_subdev_init(&ov2685->subdev, client, &ov2685_subdev_ops);
824 ret = ov2685_initialize_controls(ov2685);
825 if (ret)
826 goto err_destroy_mutex;
827
828 ret = __ov2685_power_on(ov2685);
829 if (ret)
830 goto err_free_handler;
831
832 ret = ov2685_check_sensor_id(ov2685, client);
833 if (ret)
834 goto err_power_off;
835
836 #ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
837 ov2685->subdev.internal_ops = &ov2685_internal_ops;
838 ov2685->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
839 #endif
840 #if defined(CONFIG_MEDIA_CONTROLLER)
841 ov2685->pad.flags = MEDIA_PAD_FL_SOURCE;
842 ov2685->subdev.entity.function = MEDIA_ENT_F_CAM_SENSOR;
843 ret = media_entity_pads_init(&ov2685->subdev.entity, 1, &ov2685->pad);
844 if (ret < 0)
845 goto err_power_off;
846 #endif
847
848 ret = v4l2_async_register_subdev(&ov2685->subdev);
849 if (ret) {
850 dev_err(dev, "v4l2 async register subdev failed\n");
851 goto err_clean_entity;
852 }
853
854 pm_runtime_set_active(dev);
855 pm_runtime_enable(dev);
856 pm_runtime_idle(dev);
857
858 return 0;
859
860 err_clean_entity:
861 #if defined(CONFIG_MEDIA_CONTROLLER)
862 media_entity_cleanup(&ov2685->subdev.entity);
863 #endif
864 err_power_off:
865 __ov2685_power_off(ov2685);
866 err_free_handler:
867 v4l2_ctrl_handler_free(&ov2685->ctrl_handler);
868 err_destroy_mutex:
869 mutex_destroy(&ov2685->mutex);
870
871 return ret;
872 }
873
ov2685_remove(struct i2c_client * client)874 static void ov2685_remove(struct i2c_client *client)
875 {
876 struct v4l2_subdev *sd = i2c_get_clientdata(client);
877 struct ov2685 *ov2685 = to_ov2685(sd);
878
879 v4l2_async_unregister_subdev(sd);
880 #if defined(CONFIG_MEDIA_CONTROLLER)
881 media_entity_cleanup(&sd->entity);
882 #endif
883 v4l2_ctrl_handler_free(&ov2685->ctrl_handler);
884 mutex_destroy(&ov2685->mutex);
885
886 pm_runtime_disable(&client->dev);
887 if (!pm_runtime_status_suspended(&client->dev))
888 __ov2685_power_off(ov2685);
889 pm_runtime_set_suspended(&client->dev);
890 }
891
892 #if IS_ENABLED(CONFIG_OF)
893 static const struct of_device_id ov2685_of_match[] = {
894 { .compatible = "ovti,ov2685" },
895 {},
896 };
897 MODULE_DEVICE_TABLE(of, ov2685_of_match);
898 #endif
899
900 static struct i2c_driver ov2685_i2c_driver = {
901 .driver = {
902 .name = "ov2685",
903 .pm = &ov2685_pm_ops,
904 .of_match_table = of_match_ptr(ov2685_of_match),
905 },
906 .probe = ov2685_probe,
907 .remove = ov2685_remove,
908 };
909
910 module_i2c_driver(ov2685_i2c_driver);
911
912 MODULE_DESCRIPTION("OmniVision ov2685 sensor driver");
913 MODULE_LICENSE("GPL v2");
914
