1 /*
2 * dme1737.c - Driver for the SMSC DME1737, Asus A8000, SMSC SCH311x, SCH5027,
3 * and SCH5127 Super-I/O chips integrated hardware monitoring
4 * features.
5 * Copyright (c) 2007, 2008, 2009, 2010 Juerg Haefliger <juergh@gmail.com>
6 *
7 * This driver is an I2C/ISA hybrid, meaning that it uses the I2C bus to access
8 * the chip registers if a DME1737, A8000, or SCH5027 is found and the ISA bus
9 * if a SCH311x or SCH5127 chip is found. Both types of chips have very
10 * similar hardware monitoring capabilities but differ in the way they can be
11 * accessed.
12 *
13 * This program is free software; you can redistribute it and/or modify
14 * it under the terms of the GNU General Public License as published by
15 * the Free Software Foundation; either version 2 of the License, or
16 * (at your option) any later version.
17 *
18 * This program is distributed in the hope that it will be useful,
19 * but WITHOUT ANY WARRANTY; without even the implied warranty of
20 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
21 * GNU General Public License for more details.
22 *
23 * You should have received a copy of the GNU General Public License
24 * along with this program; if not, write to the Free Software
25 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
26 */
27
28 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
29
30 #include <linux/module.h>
31 #include <linux/init.h>
32 #include <linux/slab.h>
33 #include <linux/jiffies.h>
34 #include <linux/i2c.h>
35 #include <linux/platform_device.h>
36 #include <linux/hwmon.h>
37 #include <linux/hwmon-sysfs.h>
38 #include <linux/hwmon-vid.h>
39 #include <linux/err.h>
40 #include <linux/mutex.h>
41 #include <linux/acpi.h>
42 #include <linux/io.h>
43
44 /* ISA device, if found */
45 static struct platform_device *pdev;
46
47 /* Module load parameters */
48 static bool force_start;
49 module_param(force_start, bool, 0);
50 MODULE_PARM_DESC(force_start, "Force the chip to start monitoring inputs");
51
52 static unsigned short force_id;
53 module_param(force_id, ushort, 0);
54 MODULE_PARM_DESC(force_id, "Override the detected device ID");
55
56 static bool probe_all_addr;
57 module_param(probe_all_addr, bool, 0);
58 MODULE_PARM_DESC(probe_all_addr,
59 "Include probing of non-standard LPC addresses");
60
61 /* Addresses to scan */
62 static const unsigned short normal_i2c[] = {0x2c, 0x2d, 0x2e, I2C_CLIENT_END};
63
64 enum chips { dme1737, sch5027, sch311x, sch5127 };
65
66 #define DO_REPORT "Please report to the driver maintainer."
67
68 /* ---------------------------------------------------------------------
69 * Registers
70 *
71 * The sensors are defined as follows:
72 *
73 * Voltages Temperatures
74 * -------- ------------
75 * in0 +5VTR (+5V stdby) temp1 Remote diode 1
76 * in1 Vccp (proc core) temp2 Internal temp
77 * in2 VCC (internal +3.3V) temp3 Remote diode 2
78 * in3 +5V
79 * in4 +12V
80 * in5 VTR (+3.3V stby)
81 * in6 Vbat
82 * in7 Vtrip (sch5127 only)
83 *
84 * --------------------------------------------------------------------- */
85
86 /* Voltages (in) numbered 0-7 (ix) */
87 #define DME1737_REG_IN(ix) ((ix) < 5 ? 0x20 + (ix) : \
88 (ix) < 7 ? 0x94 + (ix) : \
89 0x1f)
90 #define DME1737_REG_IN_MIN(ix) ((ix) < 5 ? 0x44 + (ix) * 2 \
91 : 0x91 + (ix) * 2)
92 #define DME1737_REG_IN_MAX(ix) ((ix) < 5 ? 0x45 + (ix) * 2 \
93 : 0x92 + (ix) * 2)
94
95 /* Temperatures (temp) numbered 0-2 (ix) */
96 #define DME1737_REG_TEMP(ix) (0x25 + (ix))
97 #define DME1737_REG_TEMP_MIN(ix) (0x4e + (ix) * 2)
98 #define DME1737_REG_TEMP_MAX(ix) (0x4f + (ix) * 2)
99 #define DME1737_REG_TEMP_OFFSET(ix) ((ix) == 0 ? 0x1f \
100 : 0x1c + (ix))
101
102 /*
103 * Voltage and temperature LSBs
104 * The LSBs (4 bits each) are stored in 5 registers with the following layouts:
105 * IN_TEMP_LSB(0) = [in5, in6]
106 * IN_TEMP_LSB(1) = [temp3, temp1]
107 * IN_TEMP_LSB(2) = [in4, temp2]
108 * IN_TEMP_LSB(3) = [in3, in0]
109 * IN_TEMP_LSB(4) = [in2, in1]
110 * IN_TEMP_LSB(5) = [res, in7]
111 */
112 #define DME1737_REG_IN_TEMP_LSB(ix) (0x84 + (ix))
113 static const u8 DME1737_REG_IN_LSB[] = {3, 4, 4, 3, 2, 0, 0, 5};
114 static const u8 DME1737_REG_IN_LSB_SHL[] = {4, 4, 0, 0, 0, 0, 4, 4};
115 static const u8 DME1737_REG_TEMP_LSB[] = {1, 2, 1};
116 static const u8 DME1737_REG_TEMP_LSB_SHL[] = {4, 4, 0};
117
118 /* Fans numbered 0-5 (ix) */
119 #define DME1737_REG_FAN(ix) ((ix) < 4 ? 0x28 + (ix) * 2 \
120 : 0xa1 + (ix) * 2)
121 #define DME1737_REG_FAN_MIN(ix) ((ix) < 4 ? 0x54 + (ix) * 2 \
122 : 0xa5 + (ix) * 2)
123 #define DME1737_REG_FAN_OPT(ix) ((ix) < 4 ? 0x90 + (ix) \
124 : 0xb2 + (ix))
125 #define DME1737_REG_FAN_MAX(ix) (0xb4 + (ix)) /* only for fan[4-5] */
126
127 /* PWMs numbered 0-2, 4-5 (ix) */
128 #define DME1737_REG_PWM(ix) ((ix) < 3 ? 0x30 + (ix) \
129 : 0xa1 + (ix))
130 #define DME1737_REG_PWM_CONFIG(ix) (0x5c + (ix)) /* only for pwm[0-2] */
131 #define DME1737_REG_PWM_MIN(ix) (0x64 + (ix)) /* only for pwm[0-2] */
132 #define DME1737_REG_PWM_FREQ(ix) ((ix) < 3 ? 0x5f + (ix) \
133 : 0xa3 + (ix))
134 /*
135 * The layout of the ramp rate registers is different from the other pwm
136 * registers. The bits for the 3 PWMs are stored in 2 registers:
137 * PWM_RR(0) = [OFF3, OFF2, OFF1, RES, RR1E, RR1-2, RR1-1, RR1-0]
138 * PWM_RR(1) = [RR2E, RR2-2, RR2-1, RR2-0, RR3E, RR3-2, RR3-1, RR3-0]
139 */
140 #define DME1737_REG_PWM_RR(ix) (0x62 + (ix)) /* only for pwm[0-2] */
141
142 /* Thermal zones 0-2 */
143 #define DME1737_REG_ZONE_LOW(ix) (0x67 + (ix))
144 #define DME1737_REG_ZONE_ABS(ix) (0x6a + (ix))
145 /*
146 * The layout of the hysteresis registers is different from the other zone
147 * registers. The bits for the 3 zones are stored in 2 registers:
148 * ZONE_HYST(0) = [H1-3, H1-2, H1-1, H1-0, H2-3, H2-2, H2-1, H2-0]
149 * ZONE_HYST(1) = [H3-3, H3-2, H3-1, H3-0, RES, RES, RES, RES]
150 */
151 #define DME1737_REG_ZONE_HYST(ix) (0x6d + (ix))
152
153 /*
154 * Alarm registers and bit mapping
155 * The 3 8-bit alarm registers will be concatenated to a single 32-bit
156 * alarm value [0, ALARM3, ALARM2, ALARM1].
157 */
158 #define DME1737_REG_ALARM1 0x41
159 #define DME1737_REG_ALARM2 0x42
160 #define DME1737_REG_ALARM3 0x83
161 static const u8 DME1737_BIT_ALARM_IN[] = {0, 1, 2, 3, 8, 16, 17, 18};
162 static const u8 DME1737_BIT_ALARM_TEMP[] = {4, 5, 6};
163 static const u8 DME1737_BIT_ALARM_FAN[] = {10, 11, 12, 13, 22, 23};
164
165 /* Miscellaneous registers */
166 #define DME1737_REG_DEVICE 0x3d
167 #define DME1737_REG_COMPANY 0x3e
168 #define DME1737_REG_VERSTEP 0x3f
169 #define DME1737_REG_CONFIG 0x40
170 #define DME1737_REG_CONFIG2 0x7f
171 #define DME1737_REG_VID 0x43
172 #define DME1737_REG_TACH_PWM 0x81
173
174 /* ---------------------------------------------------------------------
175 * Misc defines
176 * --------------------------------------------------------------------- */
177
178 /* Chip identification */
179 #define DME1737_COMPANY_SMSC 0x5c
180 #define DME1737_VERSTEP 0x88
181 #define DME1737_VERSTEP_MASK 0xf8
182 #define SCH311X_DEVICE 0x8c
183 #define SCH5027_VERSTEP 0x69
184 #define SCH5127_DEVICE 0x8e
185
186 /* Device ID values (global configuration register index 0x20) */
187 #define DME1737_ID_1 0x77
188 #define DME1737_ID_2 0x78
189 #define SCH3112_ID 0x7c
190 #define SCH3114_ID 0x7d
191 #define SCH3116_ID 0x7f
192 #define SCH5027_ID 0x89
193 #define SCH5127_ID 0x86
194
195 /* Length of ISA address segment */
196 #define DME1737_EXTENT 2
197
198 /* chip-dependent features */
199 #define HAS_TEMP_OFFSET (1 << 0) /* bit 0 */
200 #define HAS_VID (1 << 1) /* bit 1 */
201 #define HAS_ZONE3 (1 << 2) /* bit 2 */
202 #define HAS_ZONE_HYST (1 << 3) /* bit 3 */
203 #define HAS_PWM_MIN (1 << 4) /* bit 4 */
204 #define HAS_FAN(ix) (1 << ((ix) + 5)) /* bits 5-10 */
205 #define HAS_PWM(ix) (1 << ((ix) + 11)) /* bits 11-16 */
206 #define HAS_IN7 (1 << 17) /* bit 17 */
207
208 /* ---------------------------------------------------------------------
209 * Data structures and manipulation thereof
210 * --------------------------------------------------------------------- */
211
212 struct dme1737_data {
213 struct i2c_client *client; /* for I2C devices only */
214 struct device *hwmon_dev;
215 const char *name;
216 unsigned int addr; /* for ISA devices only */
217
218 struct mutex update_lock;
219 int valid; /* !=0 if following fields are valid */
220 unsigned long last_update; /* in jiffies */
221 unsigned long last_vbat; /* in jiffies */
222 enum chips type;
223 const int *in_nominal; /* pointer to IN_NOMINAL array */
224
225 u8 vid;
226 u8 pwm_rr_en;
227 u32 has_features;
228
229 /* Register values */
230 u16 in[8];
231 u8 in_min[8];
232 u8 in_max[8];
233 s16 temp[3];
234 s8 temp_min[3];
235 s8 temp_max[3];
236 s8 temp_offset[3];
237 u8 config;
238 u8 config2;
239 u8 vrm;
240 u16 fan[6];
241 u16 fan_min[6];
242 u8 fan_max[2];
243 u8 fan_opt[6];
244 u8 pwm[6];
245 u8 pwm_min[3];
246 u8 pwm_config[3];
247 u8 pwm_acz[3];
248 u8 pwm_freq[6];
249 u8 pwm_rr[2];
250 s8 zone_low[3];
251 s8 zone_abs[3];
252 u8 zone_hyst[2];
253 u32 alarms;
254 };
255
256 /* Nominal voltage values */
257 static const int IN_NOMINAL_DME1737[] = {5000, 2250, 3300, 5000, 12000, 3300,
258 3300};
259 static const int IN_NOMINAL_SCH311x[] = {2500, 1500, 3300, 5000, 12000, 3300,
260 3300};
261 static const int IN_NOMINAL_SCH5027[] = {5000, 2250, 3300, 1125, 1125, 3300,
262 3300};
263 static const int IN_NOMINAL_SCH5127[] = {2500, 2250, 3300, 1125, 1125, 3300,
264 3300, 1500};
265 #define IN_NOMINAL(type) ((type) == sch311x ? IN_NOMINAL_SCH311x : \
266 (type) == sch5027 ? IN_NOMINAL_SCH5027 : \
267 (type) == sch5127 ? IN_NOMINAL_SCH5127 : \
268 IN_NOMINAL_DME1737)
269
270 /*
271 * Voltage input
272 * Voltage inputs have 16 bits resolution, limit values have 8 bits
273 * resolution.
274 */
IN_FROM_REG(int reg,int nominal,int res)275 static inline int IN_FROM_REG(int reg, int nominal, int res)
276 {
277 return (reg * nominal + (3 << (res - 3))) / (3 << (res - 2));
278 }
279
IN_TO_REG(long val,int nominal)280 static inline int IN_TO_REG(long val, int nominal)
281 {
282 val = clamp_val(val, 0, 255 * nominal / 192);
283 return DIV_ROUND_CLOSEST(val * 192, nominal);
284 }
285
286 /*
287 * Temperature input
288 * The register values represent temperatures in 2's complement notation from
289 * -127 degrees C to +127 degrees C. Temp inputs have 16 bits resolution, limit
290 * values have 8 bits resolution.
291 */
TEMP_FROM_REG(int reg,int res)292 static inline int TEMP_FROM_REG(int reg, int res)
293 {
294 return (reg * 1000) >> (res - 8);
295 }
296
TEMP_TO_REG(long val)297 static inline int TEMP_TO_REG(long val)
298 {
299 val = clamp_val(val, -128000, 127000);
300 return DIV_ROUND_CLOSEST(val, 1000);
301 }
302
303 /* Temperature range */
304 static const int TEMP_RANGE[] = {2000, 2500, 3333, 4000, 5000, 6666, 8000,
305 10000, 13333, 16000, 20000, 26666, 32000,
306 40000, 53333, 80000};
307
TEMP_RANGE_FROM_REG(int reg)308 static inline int TEMP_RANGE_FROM_REG(int reg)
309 {
310 return TEMP_RANGE[(reg >> 4) & 0x0f];
311 }
312
TEMP_RANGE_TO_REG(long val,int reg)313 static int TEMP_RANGE_TO_REG(long val, int reg)
314 {
315 int i;
316
317 for (i = 15; i > 0; i--) {
318 if (val > (TEMP_RANGE[i] + TEMP_RANGE[i - 1] + 1) / 2)
319 break;
320 }
321
322 return (reg & 0x0f) | (i << 4);
323 }
324
325 /*
326 * Temperature hysteresis
327 * Register layout:
328 * reg[0] = [H1-3, H1-2, H1-1, H1-0, H2-3, H2-2, H2-1, H2-0]
329 * reg[1] = [H3-3, H3-2, H3-1, H3-0, xxxx, xxxx, xxxx, xxxx]
330 */
TEMP_HYST_FROM_REG(int reg,int ix)331 static inline int TEMP_HYST_FROM_REG(int reg, int ix)
332 {
333 return (((ix == 1) ? reg : reg >> 4) & 0x0f) * 1000;
334 }
335
TEMP_HYST_TO_REG(int temp,long hyst,int ix,int reg)336 static inline int TEMP_HYST_TO_REG(int temp, long hyst, int ix, int reg)
337 {
338 hyst = clamp_val(hyst, temp - 15000, temp);
339 hyst = DIV_ROUND_CLOSEST(temp - hyst, 1000);
340
341 return (ix == 1) ? (reg & 0xf0) | hyst : (reg & 0x0f) | (hyst << 4);
342 }
343
344 /* Fan input RPM */
FAN_FROM_REG(int reg,int tpc)345 static inline int FAN_FROM_REG(int reg, int tpc)
346 {
347 if (tpc)
348 return tpc * reg;
349 else
350 return (reg == 0 || reg == 0xffff) ? 0 : 90000 * 60 / reg;
351 }
352
FAN_TO_REG(long val,int tpc)353 static inline int FAN_TO_REG(long val, int tpc)
354 {
355 if (tpc) {
356 return clamp_val(val / tpc, 0, 0xffff);
357 } else {
358 return (val <= 0) ? 0xffff :
359 clamp_val(90000 * 60 / val, 0, 0xfffe);
360 }
361 }
362
363 /*
364 * Fan TPC (tach pulse count)
365 * Converts a register value to a TPC multiplier or returns 0 if the tachometer
366 * is configured in legacy (non-tpc) mode
367 */
FAN_TPC_FROM_REG(int reg)368 static inline int FAN_TPC_FROM_REG(int reg)
369 {
370 return (reg & 0x20) ? 0 : 60 >> (reg & 0x03);
371 }
372
373 /*
374 * Fan type
375 * The type of a fan is expressed in number of pulses-per-revolution that it
376 * emits
377 */
FAN_TYPE_FROM_REG(int reg)378 static inline int FAN_TYPE_FROM_REG(int reg)
379 {
380 int edge = (reg >> 1) & 0x03;
381
382 return (edge > 0) ? 1 << (edge - 1) : 0;
383 }
384
FAN_TYPE_TO_REG(long val,int reg)385 static inline int FAN_TYPE_TO_REG(long val, int reg)
386 {
387 int edge = (val == 4) ? 3 : val;
388
389 return (reg & 0xf9) | (edge << 1);
390 }
391
392 /* Fan max RPM */
393 static const int FAN_MAX[] = {0x54, 0x38, 0x2a, 0x21, 0x1c, 0x18, 0x15, 0x12,
394 0x11, 0x0f, 0x0e};
395
FAN_MAX_FROM_REG(int reg)396 static int FAN_MAX_FROM_REG(int reg)
397 {
398 int i;
399
400 for (i = 10; i > 0; i--) {
401 if (reg == FAN_MAX[i])
402 break;
403 }
404
405 return 1000 + i * 500;
406 }
407
FAN_MAX_TO_REG(long val)408 static int FAN_MAX_TO_REG(long val)
409 {
410 int i;
411
412 for (i = 10; i > 0; i--) {
413 if (val > (1000 + (i - 1) * 500))
414 break;
415 }
416
417 return FAN_MAX[i];
418 }
419
420 /*
421 * PWM enable
422 * Register to enable mapping:
423 * 000: 2 fan on zone 1 auto
424 * 001: 2 fan on zone 2 auto
425 * 010: 2 fan on zone 3 auto
426 * 011: 0 fan full on
427 * 100: -1 fan disabled
428 * 101: 2 fan on hottest of zones 2,3 auto
429 * 110: 2 fan on hottest of zones 1,2,3 auto
430 * 111: 1 fan in manual mode
431 */
PWM_EN_FROM_REG(int reg)432 static inline int PWM_EN_FROM_REG(int reg)
433 {
434 static const int en[] = {2, 2, 2, 0, -1, 2, 2, 1};
435
436 return en[(reg >> 5) & 0x07];
437 }
438
PWM_EN_TO_REG(int val,int reg)439 static inline int PWM_EN_TO_REG(int val, int reg)
440 {
441 int en = (val == 1) ? 7 : 3;
442
443 return (reg & 0x1f) | ((en & 0x07) << 5);
444 }
445
446 /*
447 * PWM auto channels zone
448 * Register to auto channels zone mapping (ACZ is a bitfield with bit x
449 * corresponding to zone x+1):
450 * 000: 001 fan on zone 1 auto
451 * 001: 010 fan on zone 2 auto
452 * 010: 100 fan on zone 3 auto
453 * 011: 000 fan full on
454 * 100: 000 fan disabled
455 * 101: 110 fan on hottest of zones 2,3 auto
456 * 110: 111 fan on hottest of zones 1,2,3 auto
457 * 111: 000 fan in manual mode
458 */
PWM_ACZ_FROM_REG(int reg)459 static inline int PWM_ACZ_FROM_REG(int reg)
460 {
461 static const int acz[] = {1, 2, 4, 0, 0, 6, 7, 0};
462
463 return acz[(reg >> 5) & 0x07];
464 }
465
PWM_ACZ_TO_REG(long val,int reg)466 static inline int PWM_ACZ_TO_REG(long val, int reg)
467 {
468 int acz = (val == 4) ? 2 : val - 1;
469
470 return (reg & 0x1f) | ((acz & 0x07) << 5);
471 }
472
473 /* PWM frequency */
474 static const int PWM_FREQ[] = {11, 15, 22, 29, 35, 44, 59, 88,
475 15000, 20000, 30000, 25000, 0, 0, 0, 0};
476
PWM_FREQ_FROM_REG(int reg)477 static inline int PWM_FREQ_FROM_REG(int reg)
478 {
479 return PWM_FREQ[reg & 0x0f];
480 }
481
PWM_FREQ_TO_REG(long val,int reg)482 static int PWM_FREQ_TO_REG(long val, int reg)
483 {
484 int i;
485
486 /* the first two cases are special - stupid chip design! */
487 if (val > 27500) {
488 i = 10;
489 } else if (val > 22500) {
490 i = 11;
491 } else {
492 for (i = 9; i > 0; i--) {
493 if (val > (PWM_FREQ[i] + PWM_FREQ[i - 1] + 1) / 2)
494 break;
495 }
496 }
497
498 return (reg & 0xf0) | i;
499 }
500
501 /*
502 * PWM ramp rate
503 * Register layout:
504 * reg[0] = [OFF3, OFF2, OFF1, RES, RR1-E, RR1-2, RR1-1, RR1-0]
505 * reg[1] = [RR2-E, RR2-2, RR2-1, RR2-0, RR3-E, RR3-2, RR3-1, RR3-0]
506 */
507 static const u8 PWM_RR[] = {206, 104, 69, 41, 26, 18, 10, 5};
508
PWM_RR_FROM_REG(int reg,int ix)509 static inline int PWM_RR_FROM_REG(int reg, int ix)
510 {
511 int rr = (ix == 1) ? reg >> 4 : reg;
512
513 return (rr & 0x08) ? PWM_RR[rr & 0x07] : 0;
514 }
515
PWM_RR_TO_REG(long val,int ix,int reg)516 static int PWM_RR_TO_REG(long val, int ix, int reg)
517 {
518 int i;
519
520 for (i = 0; i < 7; i++) {
521 if (val > (PWM_RR[i] + PWM_RR[i + 1] + 1) / 2)
522 break;
523 }
524
525 return (ix == 1) ? (reg & 0x8f) | (i << 4) : (reg & 0xf8) | i;
526 }
527
528 /* PWM ramp rate enable */
PWM_RR_EN_FROM_REG(int reg,int ix)529 static inline int PWM_RR_EN_FROM_REG(int reg, int ix)
530 {
531 return PWM_RR_FROM_REG(reg, ix) ? 1 : 0;
532 }
533
PWM_RR_EN_TO_REG(long val,int ix,int reg)534 static inline int PWM_RR_EN_TO_REG(long val, int ix, int reg)
535 {
536 int en = (ix == 1) ? 0x80 : 0x08;
537
538 return val ? reg | en : reg & ~en;
539 }
540
541 /*
542 * PWM min/off
543 * The PWM min/off bits are part of the PMW ramp rate register 0 (see above for
544 * the register layout).
545 */
PWM_OFF_FROM_REG(int reg,int ix)546 static inline int PWM_OFF_FROM_REG(int reg, int ix)
547 {
548 return (reg >> (ix + 5)) & 0x01;
549 }
550
PWM_OFF_TO_REG(int val,int ix,int reg)551 static inline int PWM_OFF_TO_REG(int val, int ix, int reg)
552 {
553 return (reg & ~(1 << (ix + 5))) | ((val & 0x01) << (ix + 5));
554 }
555
556 /* ---------------------------------------------------------------------
557 * Device I/O access
558 *
559 * ISA access is performed through an index/data register pair and needs to
560 * be protected by a mutex during runtime (not required for initialization).
561 * We use data->update_lock for this and need to ensure that we acquire it
562 * before calling dme1737_read or dme1737_write.
563 * --------------------------------------------------------------------- */
564
dme1737_read(const struct dme1737_data * data,u8 reg)565 static u8 dme1737_read(const struct dme1737_data *data, u8 reg)
566 {
567 struct i2c_client *client = data->client;
568 s32 val;
569
570 if (client) { /* I2C device */
571 val = i2c_smbus_read_byte_data(client, reg);
572
573 if (val < 0) {
574 dev_warn(&client->dev,
575 "Read from register 0x%02x failed! %s\n",
576 reg, DO_REPORT);
577 }
578 } else { /* ISA device */
579 outb(reg, data->addr);
580 val = inb(data->addr + 1);
581 }
582
583 return val;
584 }
585
dme1737_write(const struct dme1737_data * data,u8 reg,u8 val)586 static s32 dme1737_write(const struct dme1737_data *data, u8 reg, u8 val)
587 {
588 struct i2c_client *client = data->client;
589 s32 res = 0;
590
591 if (client) { /* I2C device */
592 res = i2c_smbus_write_byte_data(client, reg, val);
593
594 if (res < 0) {
595 dev_warn(&client->dev,
596 "Write to register 0x%02x failed! %s\n",
597 reg, DO_REPORT);
598 }
599 } else { /* ISA device */
600 outb(reg, data->addr);
601 outb(val, data->addr + 1);
602 }
603
604 return res;
605 }
606
dme1737_update_device(struct device * dev)607 static struct dme1737_data *dme1737_update_device(struct device *dev)
608 {
609 struct dme1737_data *data = dev_get_drvdata(dev);
610 int ix;
611 u8 lsb[6];
612
613 mutex_lock(&data->update_lock);
614
615 /* Enable a Vbat monitoring cycle every 10 mins */
616 if (time_after(jiffies, data->last_vbat + 600 * HZ) || !data->valid) {
617 dme1737_write(data, DME1737_REG_CONFIG, dme1737_read(data,
618 DME1737_REG_CONFIG) | 0x10);
619 data->last_vbat = jiffies;
620 }
621
622 /* Sample register contents every 1 sec */
623 if (time_after(jiffies, data->last_update + HZ) || !data->valid) {
624 if (data->has_features & HAS_VID) {
625 data->vid = dme1737_read(data, DME1737_REG_VID) &
626 0x3f;
627 }
628
629 /* In (voltage) registers */
630 for (ix = 0; ix < ARRAY_SIZE(data->in); ix++) {
631 /*
632 * Voltage inputs are stored as 16 bit values even
633 * though they have only 12 bits resolution. This is
634 * to make it consistent with the temp inputs.
635 */
636 if (ix == 7 && !(data->has_features & HAS_IN7))
637 continue;
638 data->in[ix] = dme1737_read(data,
639 DME1737_REG_IN(ix)) << 8;
640 data->in_min[ix] = dme1737_read(data,
641 DME1737_REG_IN_MIN(ix));
642 data->in_max[ix] = dme1737_read(data,
643 DME1737_REG_IN_MAX(ix));
644 }
645
646 /* Temp registers */
647 for (ix = 0; ix < ARRAY_SIZE(data->temp); ix++) {
648 /*
649 * Temp inputs are stored as 16 bit values even
650 * though they have only 12 bits resolution. This is
651 * to take advantage of implicit conversions between
652 * register values (2's complement) and temp values
653 * (signed decimal).
654 */
655 data->temp[ix] = dme1737_read(data,
656 DME1737_REG_TEMP(ix)) << 8;
657 data->temp_min[ix] = dme1737_read(data,
658 DME1737_REG_TEMP_MIN(ix));
659 data->temp_max[ix] = dme1737_read(data,
660 DME1737_REG_TEMP_MAX(ix));
661 if (data->has_features & HAS_TEMP_OFFSET) {
662 data->temp_offset[ix] = dme1737_read(data,
663 DME1737_REG_TEMP_OFFSET(ix));
664 }
665 }
666
667 /*
668 * In and temp LSB registers
669 * The LSBs are latched when the MSBs are read, so the order in
670 * which the registers are read (MSB first, then LSB) is
671 * important!
672 */
673 for (ix = 0; ix < ARRAY_SIZE(lsb); ix++) {
674 if (ix == 5 && !(data->has_features & HAS_IN7))
675 continue;
676 lsb[ix] = dme1737_read(data,
677 DME1737_REG_IN_TEMP_LSB(ix));
678 }
679 for (ix = 0; ix < ARRAY_SIZE(data->in); ix++) {
680 if (ix == 7 && !(data->has_features & HAS_IN7))
681 continue;
682 data->in[ix] |= (lsb[DME1737_REG_IN_LSB[ix]] <<
683 DME1737_REG_IN_LSB_SHL[ix]) & 0xf0;
684 }
685 for (ix = 0; ix < ARRAY_SIZE(data->temp); ix++) {
686 data->temp[ix] |= (lsb[DME1737_REG_TEMP_LSB[ix]] <<
687 DME1737_REG_TEMP_LSB_SHL[ix]) & 0xf0;
688 }
689
690 /* Fan registers */
691 for (ix = 0; ix < ARRAY_SIZE(data->fan); ix++) {
692 /*
693 * Skip reading registers if optional fans are not
694 * present
695 */
696 if (!(data->has_features & HAS_FAN(ix)))
697 continue;
698 data->fan[ix] = dme1737_read(data,
699 DME1737_REG_FAN(ix));
700 data->fan[ix] |= dme1737_read(data,
701 DME1737_REG_FAN(ix) + 1) << 8;
702 data->fan_min[ix] = dme1737_read(data,
703 DME1737_REG_FAN_MIN(ix));
704 data->fan_min[ix] |= dme1737_read(data,
705 DME1737_REG_FAN_MIN(ix) + 1) << 8;
706 data->fan_opt[ix] = dme1737_read(data,
707 DME1737_REG_FAN_OPT(ix));
708 /* fan_max exists only for fan[5-6] */
709 if (ix > 3) {
710 data->fan_max[ix - 4] = dme1737_read(data,
711 DME1737_REG_FAN_MAX(ix));
712 }
713 }
714
715 /* PWM registers */
716 for (ix = 0; ix < ARRAY_SIZE(data->pwm); ix++) {
717 /*
718 * Skip reading registers if optional PWMs are not
719 * present
720 */
721 if (!(data->has_features & HAS_PWM(ix)))
722 continue;
723 data->pwm[ix] = dme1737_read(data,
724 DME1737_REG_PWM(ix));
725 data->pwm_freq[ix] = dme1737_read(data,
726 DME1737_REG_PWM_FREQ(ix));
727 /* pwm_config and pwm_min exist only for pwm[1-3] */
728 if (ix < 3) {
729 data->pwm_config[ix] = dme1737_read(data,
730 DME1737_REG_PWM_CONFIG(ix));
731 data->pwm_min[ix] = dme1737_read(data,
732 DME1737_REG_PWM_MIN(ix));
733 }
734 }
735 for (ix = 0; ix < ARRAY_SIZE(data->pwm_rr); ix++) {
736 data->pwm_rr[ix] = dme1737_read(data,
737 DME1737_REG_PWM_RR(ix));
738 }
739
740 /* Thermal zone registers */
741 for (ix = 0; ix < ARRAY_SIZE(data->zone_low); ix++) {
742 /* Skip reading registers if zone3 is not present */
743 if ((ix == 2) && !(data->has_features & HAS_ZONE3))
744 continue;
745 /* sch5127 zone2 registers are special */
746 if ((ix == 1) && (data->type == sch5127)) {
747 data->zone_low[1] = dme1737_read(data,
748 DME1737_REG_ZONE_LOW(2));
749 data->zone_abs[1] = dme1737_read(data,
750 DME1737_REG_ZONE_ABS(2));
751 } else {
752 data->zone_low[ix] = dme1737_read(data,
753 DME1737_REG_ZONE_LOW(ix));
754 data->zone_abs[ix] = dme1737_read(data,
755 DME1737_REG_ZONE_ABS(ix));
756 }
757 }
758 if (data->has_features & HAS_ZONE_HYST) {
759 for (ix = 0; ix < ARRAY_SIZE(data->zone_hyst); ix++) {
760 data->zone_hyst[ix] = dme1737_read(data,
761 DME1737_REG_ZONE_HYST(ix));
762 }
763 }
764
765 /* Alarm registers */
766 data->alarms = dme1737_read(data,
767 DME1737_REG_ALARM1);
768 /*
769 * Bit 7 tells us if the other alarm registers are non-zero and
770 * therefore also need to be read
771 */
772 if (data->alarms & 0x80) {
773 data->alarms |= dme1737_read(data,
774 DME1737_REG_ALARM2) << 8;
775 data->alarms |= dme1737_read(data,
776 DME1737_REG_ALARM3) << 16;
777 }
778
779 /*
780 * The ISA chips require explicit clearing of alarm bits.
781 * Don't worry, an alarm will come back if the condition
782 * that causes it still exists
783 */
784 if (!data->client) {
785 if (data->alarms & 0xff0000)
786 dme1737_write(data, DME1737_REG_ALARM3, 0xff);
787 if (data->alarms & 0xff00)
788 dme1737_write(data, DME1737_REG_ALARM2, 0xff);
789 if (data->alarms & 0xff)
790 dme1737_write(data, DME1737_REG_ALARM1, 0xff);
791 }
792
793 data->last_update = jiffies;
794 data->valid = 1;
795 }
796
797 mutex_unlock(&data->update_lock);
798
799 return data;
800 }
801
802 /* ---------------------------------------------------------------------
803 * Voltage sysfs attributes
804 * ix = [0-7]
805 * --------------------------------------------------------------------- */
806
807 #define SYS_IN_INPUT 0
808 #define SYS_IN_MIN 1
809 #define SYS_IN_MAX 2
810 #define SYS_IN_ALARM 3
811
show_in(struct device * dev,struct device_attribute * attr,char * buf)812 static ssize_t show_in(struct device *dev, struct device_attribute *attr,
813 char *buf)
814 {
815 struct dme1737_data *data = dme1737_update_device(dev);
816 struct sensor_device_attribute_2
817 *sensor_attr_2 = to_sensor_dev_attr_2(attr);
818 int ix = sensor_attr_2->index;
819 int fn = sensor_attr_2->nr;
820 int res;
821
822 switch (fn) {
823 case SYS_IN_INPUT:
824 res = IN_FROM_REG(data->in[ix], data->in_nominal[ix], 16);
825 break;
826 case SYS_IN_MIN:
827 res = IN_FROM_REG(data->in_min[ix], data->in_nominal[ix], 8);
828 break;
829 case SYS_IN_MAX:
830 res = IN_FROM_REG(data->in_max[ix], data->in_nominal[ix], 8);
831 break;
832 case SYS_IN_ALARM:
833 res = (data->alarms >> DME1737_BIT_ALARM_IN[ix]) & 0x01;
834 break;
835 default:
836 res = 0;
837 dev_dbg(dev, "Unknown function %d.\n", fn);
838 }
839
840 return sprintf(buf, "%d\n", res);
841 }
842
set_in(struct device * dev,struct device_attribute * attr,const char * buf,size_t count)843 static ssize_t set_in(struct device *dev, struct device_attribute *attr,
844 const char *buf, size_t count)
845 {
846 struct dme1737_data *data = dev_get_drvdata(dev);
847 struct sensor_device_attribute_2
848 *sensor_attr_2 = to_sensor_dev_attr_2(attr);
849 int ix = sensor_attr_2->index;
850 int fn = sensor_attr_2->nr;
851 long val;
852 int err;
853
854 err = kstrtol(buf, 10, &val);
855 if (err)
856 return err;
857
858 mutex_lock(&data->update_lock);
859 switch (fn) {
860 case SYS_IN_MIN:
861 data->in_min[ix] = IN_TO_REG(val, data->in_nominal[ix]);
862 dme1737_write(data, DME1737_REG_IN_MIN(ix),
863 data->in_min[ix]);
864 break;
865 case SYS_IN_MAX:
866 data->in_max[ix] = IN_TO_REG(val, data->in_nominal[ix]);
867 dme1737_write(data, DME1737_REG_IN_MAX(ix),
868 data->in_max[ix]);
869 break;
870 default:
871 dev_dbg(dev, "Unknown function %d.\n", fn);
872 }
873 mutex_unlock(&data->update_lock);
874
875 return count;
876 }
877
878 /* ---------------------------------------------------------------------
879 * Temperature sysfs attributes
880 * ix = [0-2]
881 * --------------------------------------------------------------------- */
882
883 #define SYS_TEMP_INPUT 0
884 #define SYS_TEMP_MIN 1
885 #define SYS_TEMP_MAX 2
886 #define SYS_TEMP_OFFSET 3
887 #define SYS_TEMP_ALARM 4
888 #define SYS_TEMP_FAULT 5
889
show_temp(struct device * dev,struct device_attribute * attr,char * buf)890 static ssize_t show_temp(struct device *dev, struct device_attribute *attr,
891 char *buf)
892 {
893 struct dme1737_data *data = dme1737_update_device(dev);
894 struct sensor_device_attribute_2
895 *sensor_attr_2 = to_sensor_dev_attr_2(attr);
896 int ix = sensor_attr_2->index;
897 int fn = sensor_attr_2->nr;
898 int res;
899
900 switch (fn) {
901 case SYS_TEMP_INPUT:
902 res = TEMP_FROM_REG(data->temp[ix], 16);
903 break;
904 case SYS_TEMP_MIN:
905 res = TEMP_FROM_REG(data->temp_min[ix], 8);
906 break;
907 case SYS_TEMP_MAX:
908 res = TEMP_FROM_REG(data->temp_max[ix], 8);
909 break;
910 case SYS_TEMP_OFFSET:
911 res = TEMP_FROM_REG(data->temp_offset[ix], 8);
912 break;
913 case SYS_TEMP_ALARM:
914 res = (data->alarms >> DME1737_BIT_ALARM_TEMP[ix]) & 0x01;
915 break;
916 case SYS_TEMP_FAULT:
917 res = (((u16)data->temp[ix] & 0xff00) == 0x8000);
918 break;
919 default:
920 res = 0;
921 dev_dbg(dev, "Unknown function %d.\n", fn);
922 }
923
924 return sprintf(buf, "%d\n", res);
925 }
926
set_temp(struct device * dev,struct device_attribute * attr,const char * buf,size_t count)927 static ssize_t set_temp(struct device *dev, struct device_attribute *attr,
928 const char *buf, size_t count)
929 {
930 struct dme1737_data *data = dev_get_drvdata(dev);
931 struct sensor_device_attribute_2
932 *sensor_attr_2 = to_sensor_dev_attr_2(attr);
933 int ix = sensor_attr_2->index;
934 int fn = sensor_attr_2->nr;
935 long val;
936 int err;
937
938 err = kstrtol(buf, 10, &val);
939 if (err)
940 return err;
941
942 mutex_lock(&data->update_lock);
943 switch (fn) {
944 case SYS_TEMP_MIN:
945 data->temp_min[ix] = TEMP_TO_REG(val);
946 dme1737_write(data, DME1737_REG_TEMP_MIN(ix),
947 data->temp_min[ix]);
948 break;
949 case SYS_TEMP_MAX:
950 data->temp_max[ix] = TEMP_TO_REG(val);
951 dme1737_write(data, DME1737_REG_TEMP_MAX(ix),
952 data->temp_max[ix]);
953 break;
954 case SYS_TEMP_OFFSET:
955 data->temp_offset[ix] = TEMP_TO_REG(val);
956 dme1737_write(data, DME1737_REG_TEMP_OFFSET(ix),
957 data->temp_offset[ix]);
958 break;
959 default:
960 dev_dbg(dev, "Unknown function %d.\n", fn);
961 }
962 mutex_unlock(&data->update_lock);
963
964 return count;
965 }
966
967 /* ---------------------------------------------------------------------
968 * Zone sysfs attributes
969 * ix = [0-2]
970 * --------------------------------------------------------------------- */
971
972 #define SYS_ZONE_AUTO_CHANNELS_TEMP 0
973 #define SYS_ZONE_AUTO_POINT1_TEMP_HYST 1
974 #define SYS_ZONE_AUTO_POINT1_TEMP 2
975 #define SYS_ZONE_AUTO_POINT2_TEMP 3
976 #define SYS_ZONE_AUTO_POINT3_TEMP 4
977
show_zone(struct device * dev,struct device_attribute * attr,char * buf)978 static ssize_t show_zone(struct device *dev, struct device_attribute *attr,
979 char *buf)
980 {
981 struct dme1737_data *data = dme1737_update_device(dev);
982 struct sensor_device_attribute_2
983 *sensor_attr_2 = to_sensor_dev_attr_2(attr);
984 int ix = sensor_attr_2->index;
985 int fn = sensor_attr_2->nr;
986 int res;
987
988 switch (fn) {
989 case SYS_ZONE_AUTO_CHANNELS_TEMP:
990 /* check config2 for non-standard temp-to-zone mapping */
991 if ((ix == 1) && (data->config2 & 0x02))
992 res = 4;
993 else
994 res = 1 << ix;
995 break;
996 case SYS_ZONE_AUTO_POINT1_TEMP_HYST:
997 res = TEMP_FROM_REG(data->zone_low[ix], 8) -
998 TEMP_HYST_FROM_REG(data->zone_hyst[ix == 2], ix);
999 break;
1000 case SYS_ZONE_AUTO_POINT1_TEMP:
1001 res = TEMP_FROM_REG(data->zone_low[ix], 8);
1002 break;
1003 case SYS_ZONE_AUTO_POINT2_TEMP:
1004 /* pwm_freq holds the temp range bits in the upper nibble */
1005 res = TEMP_FROM_REG(data->zone_low[ix], 8) +
1006 TEMP_RANGE_FROM_REG(data->pwm_freq[ix]);
1007 break;
1008 case SYS_ZONE_AUTO_POINT3_TEMP:
1009 res = TEMP_FROM_REG(data->zone_abs[ix], 8);
1010 break;
1011 default:
1012 res = 0;
1013 dev_dbg(dev, "Unknown function %d.\n", fn);
1014 }
1015
1016 return sprintf(buf, "%d\n", res);
1017 }
1018
set_zone(struct device * dev,struct device_attribute * attr,const char * buf,size_t count)1019 static ssize_t set_zone(struct device *dev, struct device_attribute *attr,
1020 const char *buf, size_t count)
1021 {
1022 struct dme1737_data *data = dev_get_drvdata(dev);
1023 struct sensor_device_attribute_2
1024 *sensor_attr_2 = to_sensor_dev_attr_2(attr);
1025 int ix = sensor_attr_2->index;
1026 int fn = sensor_attr_2->nr;
1027 long val;
1028 int temp;
1029 int err;
1030 u8 reg;
1031
1032 err = kstrtol(buf, 10, &val);
1033 if (err)
1034 return err;
1035
1036 mutex_lock(&data->update_lock);
1037 switch (fn) {
1038 case SYS_ZONE_AUTO_POINT1_TEMP_HYST:
1039 /* Refresh the cache */
1040 data->zone_low[ix] = dme1737_read(data,
1041 DME1737_REG_ZONE_LOW(ix));
1042 /* Modify the temp hyst value */
1043 temp = TEMP_FROM_REG(data->zone_low[ix], 8);
1044 reg = dme1737_read(data, DME1737_REG_ZONE_HYST(ix == 2));
1045 data->zone_hyst[ix == 2] = TEMP_HYST_TO_REG(temp, val, ix, reg);
1046 dme1737_write(data, DME1737_REG_ZONE_HYST(ix == 2),
1047 data->zone_hyst[ix == 2]);
1048 break;
1049 case SYS_ZONE_AUTO_POINT1_TEMP:
1050 data->zone_low[ix] = TEMP_TO_REG(val);
1051 dme1737_write(data, DME1737_REG_ZONE_LOW(ix),
1052 data->zone_low[ix]);
1053 break;
1054 case SYS_ZONE_AUTO_POINT2_TEMP:
1055 /* Refresh the cache */
1056 data->zone_low[ix] = dme1737_read(data,
1057 DME1737_REG_ZONE_LOW(ix));
1058 /*
1059 * Modify the temp range value (which is stored in the upper
1060 * nibble of the pwm_freq register)
1061 */
1062 temp = TEMP_FROM_REG(data->zone_low[ix], 8);
1063 val = clamp_val(val, temp, temp + 80000);
1064 reg = dme1737_read(data, DME1737_REG_PWM_FREQ(ix));
1065 data->pwm_freq[ix] = TEMP_RANGE_TO_REG(val - temp, reg);
1066 dme1737_write(data, DME1737_REG_PWM_FREQ(ix),
1067 data->pwm_freq[ix]);
1068 break;
1069 case SYS_ZONE_AUTO_POINT3_TEMP:
1070 data->zone_abs[ix] = TEMP_TO_REG(val);
1071 dme1737_write(data, DME1737_REG_ZONE_ABS(ix),
1072 data->zone_abs[ix]);
1073 break;
1074 default:
1075 dev_dbg(dev, "Unknown function %d.\n", fn);
1076 }
1077 mutex_unlock(&data->update_lock);
1078
1079 return count;
1080 }
1081
1082 /* ---------------------------------------------------------------------
1083 * Fan sysfs attributes
1084 * ix = [0-5]
1085 * --------------------------------------------------------------------- */
1086
1087 #define SYS_FAN_INPUT 0
1088 #define SYS_FAN_MIN 1
1089 #define SYS_FAN_MAX 2
1090 #define SYS_FAN_ALARM 3
1091 #define SYS_FAN_TYPE 4
1092
show_fan(struct device * dev,struct device_attribute * attr,char * buf)1093 static ssize_t show_fan(struct device *dev, struct device_attribute *attr,
1094 char *buf)
1095 {
1096 struct dme1737_data *data = dme1737_update_device(dev);
1097 struct sensor_device_attribute_2
1098 *sensor_attr_2 = to_sensor_dev_attr_2(attr);
1099 int ix = sensor_attr_2->index;
1100 int fn = sensor_attr_2->nr;
1101 int res;
1102
1103 switch (fn) {
1104 case SYS_FAN_INPUT:
1105 res = FAN_FROM_REG(data->fan[ix],
1106 ix < 4 ? 0 :
1107 FAN_TPC_FROM_REG(data->fan_opt[ix]));
1108 break;
1109 case SYS_FAN_MIN:
1110 res = FAN_FROM_REG(data->fan_min[ix],
1111 ix < 4 ? 0 :
1112 FAN_TPC_FROM_REG(data->fan_opt[ix]));
1113 break;
1114 case SYS_FAN_MAX:
1115 /* only valid for fan[5-6] */
1116 res = FAN_MAX_FROM_REG(data->fan_max[ix - 4]);
1117 break;
1118 case SYS_FAN_ALARM:
1119 res = (data->alarms >> DME1737_BIT_ALARM_FAN[ix]) & 0x01;
1120 break;
1121 case SYS_FAN_TYPE:
1122 /* only valid for fan[1-4] */
1123 res = FAN_TYPE_FROM_REG(data->fan_opt[ix]);
1124 break;
1125 default:
1126 res = 0;
1127 dev_dbg(dev, "Unknown function %d.\n", fn);
1128 }
1129
1130 return sprintf(buf, "%d\n", res);
1131 }
1132
set_fan(struct device * dev,struct device_attribute * attr,const char * buf,size_t count)1133 static ssize_t set_fan(struct device *dev, struct device_attribute *attr,
1134 const char *buf, size_t count)
1135 {
1136 struct dme1737_data *data = dev_get_drvdata(dev);
1137 struct sensor_device_attribute_2
1138 *sensor_attr_2 = to_sensor_dev_attr_2(attr);
1139 int ix = sensor_attr_2->index;
1140 int fn = sensor_attr_2->nr;
1141 long val;
1142 int err;
1143
1144 err = kstrtol(buf, 10, &val);
1145 if (err)
1146 return err;
1147
1148 mutex_lock(&data->update_lock);
1149 switch (fn) {
1150 case SYS_FAN_MIN:
1151 if (ix < 4) {
1152 data->fan_min[ix] = FAN_TO_REG(val, 0);
1153 } else {
1154 /* Refresh the cache */
1155 data->fan_opt[ix] = dme1737_read(data,
1156 DME1737_REG_FAN_OPT(ix));
1157 /* Modify the fan min value */
1158 data->fan_min[ix] = FAN_TO_REG(val,
1159 FAN_TPC_FROM_REG(data->fan_opt[ix]));
1160 }
1161 dme1737_write(data, DME1737_REG_FAN_MIN(ix),
1162 data->fan_min[ix] & 0xff);
1163 dme1737_write(data, DME1737_REG_FAN_MIN(ix) + 1,
1164 data->fan_min[ix] >> 8);
1165 break;
1166 case SYS_FAN_MAX:
1167 /* Only valid for fan[5-6] */
1168 data->fan_max[ix - 4] = FAN_MAX_TO_REG(val);
1169 dme1737_write(data, DME1737_REG_FAN_MAX(ix),
1170 data->fan_max[ix - 4]);
1171 break;
1172 case SYS_FAN_TYPE:
1173 /* Only valid for fan[1-4] */
1174 if (!(val == 1 || val == 2 || val == 4)) {
1175 count = -EINVAL;
1176 dev_warn(dev,
1177 "Fan type value %ld not supported. Choose one of 1, 2, or 4.\n",
1178 val);
1179 goto exit;
1180 }
1181 data->fan_opt[ix] = FAN_TYPE_TO_REG(val, dme1737_read(data,
1182 DME1737_REG_FAN_OPT(ix)));
1183 dme1737_write(data, DME1737_REG_FAN_OPT(ix),
1184 data->fan_opt[ix]);
1185 break;
1186 default:
1187 dev_dbg(dev, "Unknown function %d.\n", fn);
1188 }
1189 exit:
1190 mutex_unlock(&data->update_lock);
1191
1192 return count;
1193 }
1194
1195 /* ---------------------------------------------------------------------
1196 * PWM sysfs attributes
1197 * ix = [0-4]
1198 * --------------------------------------------------------------------- */
1199
1200 #define SYS_PWM 0
1201 #define SYS_PWM_FREQ 1
1202 #define SYS_PWM_ENABLE 2
1203 #define SYS_PWM_RAMP_RATE 3
1204 #define SYS_PWM_AUTO_CHANNELS_ZONE 4
1205 #define SYS_PWM_AUTO_PWM_MIN 5
1206 #define SYS_PWM_AUTO_POINT1_PWM 6
1207 #define SYS_PWM_AUTO_POINT2_PWM 7
1208
show_pwm(struct device * dev,struct device_attribute * attr,char * buf)1209 static ssize_t show_pwm(struct device *dev, struct device_attribute *attr,
1210 char *buf)
1211 {
1212 struct dme1737_data *data = dme1737_update_device(dev);
1213 struct sensor_device_attribute_2
1214 *sensor_attr_2 = to_sensor_dev_attr_2(attr);
1215 int ix = sensor_attr_2->index;
1216 int fn = sensor_attr_2->nr;
1217 int res;
1218
1219 switch (fn) {
1220 case SYS_PWM:
1221 if (PWM_EN_FROM_REG(data->pwm_config[ix]) == 0)
1222 res = 255;
1223 else
1224 res = data->pwm[ix];
1225 break;
1226 case SYS_PWM_FREQ:
1227 res = PWM_FREQ_FROM_REG(data->pwm_freq[ix]);
1228 break;
1229 case SYS_PWM_ENABLE:
1230 if (ix >= 3)
1231 res = 1; /* pwm[5-6] hard-wired to manual mode */
1232 else
1233 res = PWM_EN_FROM_REG(data->pwm_config[ix]);
1234 break;
1235 case SYS_PWM_RAMP_RATE:
1236 /* Only valid for pwm[1-3] */
1237 res = PWM_RR_FROM_REG(data->pwm_rr[ix > 0], ix);
1238 break;
1239 case SYS_PWM_AUTO_CHANNELS_ZONE:
1240 /* Only valid for pwm[1-3] */
1241 if (PWM_EN_FROM_REG(data->pwm_config[ix]) == 2)
1242 res = PWM_ACZ_FROM_REG(data->pwm_config[ix]);
1243 else
1244 res = data->pwm_acz[ix];
1245 break;
1246 case SYS_PWM_AUTO_PWM_MIN:
1247 /* Only valid for pwm[1-3] */
1248 if (PWM_OFF_FROM_REG(data->pwm_rr[0], ix))
1249 res = data->pwm_min[ix];
1250 else
1251 res = 0;
1252 break;
1253 case SYS_PWM_AUTO_POINT1_PWM:
1254 /* Only valid for pwm[1-3] */
1255 res = data->pwm_min[ix];
1256 break;
1257 case SYS_PWM_AUTO_POINT2_PWM:
1258 /* Only valid for pwm[1-3] */
1259 res = 255; /* hard-wired */
1260 break;
1261 default:
1262 res = 0;
1263 dev_dbg(dev, "Unknown function %d.\n", fn);
1264 }
1265
1266 return sprintf(buf, "%d\n", res);
1267 }
1268
1269 static struct attribute *dme1737_pwm_chmod_attr[];
1270 static void dme1737_chmod_file(struct device*, struct attribute*, umode_t);
1271
set_pwm(struct device * dev,struct device_attribute * attr,const char * buf,size_t count)1272 static ssize_t set_pwm(struct device *dev, struct device_attribute *attr,
1273 const char *buf, size_t count)
1274 {
1275 struct dme1737_data *data = dev_get_drvdata(dev);
1276 struct sensor_device_attribute_2
1277 *sensor_attr_2 = to_sensor_dev_attr_2(attr);
1278 int ix = sensor_attr_2->index;
1279 int fn = sensor_attr_2->nr;
1280 long val;
1281 int err;
1282
1283 err = kstrtol(buf, 10, &val);
1284 if (err)
1285 return err;
1286
1287 mutex_lock(&data->update_lock);
1288 switch (fn) {
1289 case SYS_PWM:
1290 data->pwm[ix] = clamp_val(val, 0, 255);
1291 dme1737_write(data, DME1737_REG_PWM(ix), data->pwm[ix]);
1292 break;
1293 case SYS_PWM_FREQ:
1294 data->pwm_freq[ix] = PWM_FREQ_TO_REG(val, dme1737_read(data,
1295 DME1737_REG_PWM_FREQ(ix)));
1296 dme1737_write(data, DME1737_REG_PWM_FREQ(ix),
1297 data->pwm_freq[ix]);
1298 break;
1299 case SYS_PWM_ENABLE:
1300 /* Only valid for pwm[1-3] */
1301 if (val < 0 || val > 2) {
1302 count = -EINVAL;
1303 dev_warn(dev,
1304 "PWM enable %ld not supported. Choose one of 0, 1, or 2.\n",
1305 val);
1306 goto exit;
1307 }
1308 /* Refresh the cache */
1309 data->pwm_config[ix] = dme1737_read(data,
1310 DME1737_REG_PWM_CONFIG(ix));
1311 if (val == PWM_EN_FROM_REG(data->pwm_config[ix])) {
1312 /* Bail out if no change */
1313 goto exit;
1314 }
1315 /* Do some housekeeping if we are currently in auto mode */
1316 if (PWM_EN_FROM_REG(data->pwm_config[ix]) == 2) {
1317 /* Save the current zone channel assignment */
1318 data->pwm_acz[ix] = PWM_ACZ_FROM_REG(
1319 data->pwm_config[ix]);
1320 /* Save the current ramp rate state and disable it */
1321 data->pwm_rr[ix > 0] = dme1737_read(data,
1322 DME1737_REG_PWM_RR(ix > 0));
1323 data->pwm_rr_en &= ~(1 << ix);
1324 if (PWM_RR_EN_FROM_REG(data->pwm_rr[ix > 0], ix)) {
1325 data->pwm_rr_en |= (1 << ix);
1326 data->pwm_rr[ix > 0] = PWM_RR_EN_TO_REG(0, ix,
1327 data->pwm_rr[ix > 0]);
1328 dme1737_write(data,
1329 DME1737_REG_PWM_RR(ix > 0),
1330 data->pwm_rr[ix > 0]);
1331 }
1332 }
1333 /* Set the new PWM mode */
1334 switch (val) {
1335 case 0:
1336 /* Change permissions of pwm[ix] to read-only */
1337 dme1737_chmod_file(dev, dme1737_pwm_chmod_attr[ix],
1338 S_IRUGO);
1339 /* Turn fan fully on */
1340 data->pwm_config[ix] = PWM_EN_TO_REG(0,
1341 data->pwm_config[ix]);
1342 dme1737_write(data, DME1737_REG_PWM_CONFIG(ix),
1343 data->pwm_config[ix]);
1344 break;
1345 case 1:
1346 /* Turn on manual mode */
1347 data->pwm_config[ix] = PWM_EN_TO_REG(1,
1348 data->pwm_config[ix]);
1349 dme1737_write(data, DME1737_REG_PWM_CONFIG(ix),
1350 data->pwm_config[ix]);
1351 /* Change permissions of pwm[ix] to read-writeable */
1352 dme1737_chmod_file(dev, dme1737_pwm_chmod_attr[ix],
1353 S_IRUGO | S_IWUSR);
1354 break;
1355 case 2:
1356 /* Change permissions of pwm[ix] to read-only */
1357 dme1737_chmod_file(dev, dme1737_pwm_chmod_attr[ix],
1358 S_IRUGO);
1359 /*
1360 * Turn on auto mode using the saved zone channel
1361 * assignment
1362 */
1363 data->pwm_config[ix] = PWM_ACZ_TO_REG(
1364 data->pwm_acz[ix],
1365 data->pwm_config[ix]);
1366 dme1737_write(data, DME1737_REG_PWM_CONFIG(ix),
1367 data->pwm_config[ix]);
1368 /* Enable PWM ramp rate if previously enabled */
1369 if (data->pwm_rr_en & (1 << ix)) {
1370 data->pwm_rr[ix > 0] = PWM_RR_EN_TO_REG(1, ix,
1371 dme1737_read(data,
1372 DME1737_REG_PWM_RR(ix > 0)));
1373 dme1737_write(data,
1374 DME1737_REG_PWM_RR(ix > 0),
1375 data->pwm_rr[ix > 0]);
1376 }
1377 break;
1378 }
1379 break;
1380 case SYS_PWM_RAMP_RATE:
1381 /* Only valid for pwm[1-3] */
1382 /* Refresh the cache */
1383 data->pwm_config[ix] = dme1737_read(data,
1384 DME1737_REG_PWM_CONFIG(ix));
1385 data->pwm_rr[ix > 0] = dme1737_read(data,
1386 DME1737_REG_PWM_RR(ix > 0));
1387 /* Set the ramp rate value */
1388 if (val > 0) {
1389 data->pwm_rr[ix > 0] = PWM_RR_TO_REG(val, ix,
1390 data->pwm_rr[ix > 0]);
1391 }
1392 /*
1393 * Enable/disable the feature only if the associated PWM
1394 * output is in automatic mode.
1395 */
1396 if (PWM_EN_FROM_REG(data->pwm_config[ix]) == 2) {
1397 data->pwm_rr[ix > 0] = PWM_RR_EN_TO_REG(val > 0, ix,
1398 data->pwm_rr[ix > 0]);
1399 }
1400 dme1737_write(data, DME1737_REG_PWM_RR(ix > 0),
1401 data->pwm_rr[ix > 0]);
1402 break;
1403 case SYS_PWM_AUTO_CHANNELS_ZONE:
1404 /* Only valid for pwm[1-3] */
1405 if (!(val == 1 || val == 2 || val == 4 ||
1406 val == 6 || val == 7)) {
1407 count = -EINVAL;
1408 dev_warn(dev,
1409 "PWM auto channels zone %ld not supported. Choose one of 1, 2, 4, 6, "
1410 "or 7.\n", val);
1411 goto exit;
1412 }
1413 /* Refresh the cache */
1414 data->pwm_config[ix] = dme1737_read(data,
1415 DME1737_REG_PWM_CONFIG(ix));
1416 if (PWM_EN_FROM_REG(data->pwm_config[ix]) == 2) {
1417 /*
1418 * PWM is already in auto mode so update the temp
1419 * channel assignment
1420 */
1421 data->pwm_config[ix] = PWM_ACZ_TO_REG(val,
1422 data->pwm_config[ix]);
1423 dme1737_write(data, DME1737_REG_PWM_CONFIG(ix),
1424 data->pwm_config[ix]);
1425 } else {
1426 /*
1427 * PWM is not in auto mode so we save the temp
1428 * channel assignment for later use
1429 */
1430 data->pwm_acz[ix] = val;
1431 }
1432 break;
1433 case SYS_PWM_AUTO_PWM_MIN:
1434 /* Only valid for pwm[1-3] */
1435 /* Refresh the cache */
1436 data->pwm_min[ix] = dme1737_read(data,
1437 DME1737_REG_PWM_MIN(ix));
1438 /*
1439 * There are only 2 values supported for the auto_pwm_min
1440 * value: 0 or auto_point1_pwm. So if the temperature drops
1441 * below the auto_point1_temp_hyst value, the fan either turns
1442 * off or runs at auto_point1_pwm duty-cycle.
1443 */
1444 if (val > ((data->pwm_min[ix] + 1) / 2)) {
1445 data->pwm_rr[0] = PWM_OFF_TO_REG(1, ix,
1446 dme1737_read(data,
1447 DME1737_REG_PWM_RR(0)));
1448 } else {
1449 data->pwm_rr[0] = PWM_OFF_TO_REG(0, ix,
1450 dme1737_read(data,
1451 DME1737_REG_PWM_RR(0)));
1452 }
1453 dme1737_write(data, DME1737_REG_PWM_RR(0),
1454 data->pwm_rr[0]);
1455 break;
1456 case SYS_PWM_AUTO_POINT1_PWM:
1457 /* Only valid for pwm[1-3] */
1458 data->pwm_min[ix] = clamp_val(val, 0, 255);
1459 dme1737_write(data, DME1737_REG_PWM_MIN(ix),
1460 data->pwm_min[ix]);
1461 break;
1462 default:
1463 dev_dbg(dev, "Unknown function %d.\n", fn);
1464 }
1465 exit:
1466 mutex_unlock(&data->update_lock);
1467
1468 return count;
1469 }
1470
1471 /* ---------------------------------------------------------------------
1472 * Miscellaneous sysfs attributes
1473 * --------------------------------------------------------------------- */
1474
vrm_show(struct device * dev,struct device_attribute * attr,char * buf)1475 static ssize_t vrm_show(struct device *dev, struct device_attribute *attr,
1476 char *buf)
1477 {
1478 struct i2c_client *client = to_i2c_client(dev);
1479 struct dme1737_data *data = i2c_get_clientdata(client);
1480
1481 return sprintf(buf, "%d\n", data->vrm);
1482 }
1483
vrm_store(struct device * dev,struct device_attribute * attr,const char * buf,size_t count)1484 static ssize_t vrm_store(struct device *dev, struct device_attribute *attr,
1485 const char *buf, size_t count)
1486 {
1487 struct dme1737_data *data = dev_get_drvdata(dev);
1488 unsigned long val;
1489 int err;
1490
1491 err = kstrtoul(buf, 10, &val);
1492 if (err)
1493 return err;
1494
1495 if (val > 255)
1496 return -EINVAL;
1497
1498 data->vrm = val;
1499 return count;
1500 }
1501
cpu0_vid_show(struct device * dev,struct device_attribute * attr,char * buf)1502 static ssize_t cpu0_vid_show(struct device *dev,
1503 struct device_attribute *attr, char *buf)
1504 {
1505 struct dme1737_data *data = dme1737_update_device(dev);
1506
1507 return sprintf(buf, "%d\n", vid_from_reg(data->vid, data->vrm));
1508 }
1509
name_show(struct device * dev,struct device_attribute * attr,char * buf)1510 static ssize_t name_show(struct device *dev, struct device_attribute *attr,
1511 char *buf)
1512 {
1513 struct dme1737_data *data = dev_get_drvdata(dev);
1514
1515 return sprintf(buf, "%s\n", data->name);
1516 }
1517
1518 /* ---------------------------------------------------------------------
1519 * Sysfs device attribute defines and structs
1520 * --------------------------------------------------------------------- */
1521
1522 /* Voltages 0-7 */
1523
1524 #define SENSOR_DEVICE_ATTR_IN(ix) \
1525 static SENSOR_DEVICE_ATTR_2(in##ix##_input, S_IRUGO, \
1526 show_in, NULL, SYS_IN_INPUT, ix); \
1527 static SENSOR_DEVICE_ATTR_2(in##ix##_min, S_IRUGO | S_IWUSR, \
1528 show_in, set_in, SYS_IN_MIN, ix); \
1529 static SENSOR_DEVICE_ATTR_2(in##ix##_max, S_IRUGO | S_IWUSR, \
1530 show_in, set_in, SYS_IN_MAX, ix); \
1531 static SENSOR_DEVICE_ATTR_2(in##ix##_alarm, S_IRUGO, \
1532 show_in, NULL, SYS_IN_ALARM, ix)
1533
1534 SENSOR_DEVICE_ATTR_IN(0);
1535 SENSOR_DEVICE_ATTR_IN(1);
1536 SENSOR_DEVICE_ATTR_IN(2);
1537 SENSOR_DEVICE_ATTR_IN(3);
1538 SENSOR_DEVICE_ATTR_IN(4);
1539 SENSOR_DEVICE_ATTR_IN(5);
1540 SENSOR_DEVICE_ATTR_IN(6);
1541 SENSOR_DEVICE_ATTR_IN(7);
1542
1543 /* Temperatures 1-3 */
1544
1545 #define SENSOR_DEVICE_ATTR_TEMP(ix) \
1546 static SENSOR_DEVICE_ATTR_2(temp##ix##_input, S_IRUGO, \
1547 show_temp, NULL, SYS_TEMP_INPUT, ix-1); \
1548 static SENSOR_DEVICE_ATTR_2(temp##ix##_min, S_IRUGO | S_IWUSR, \
1549 show_temp, set_temp, SYS_TEMP_MIN, ix-1); \
1550 static SENSOR_DEVICE_ATTR_2(temp##ix##_max, S_IRUGO | S_IWUSR, \
1551 show_temp, set_temp, SYS_TEMP_MAX, ix-1); \
1552 static SENSOR_DEVICE_ATTR_2(temp##ix##_offset, S_IRUGO, \
1553 show_temp, set_temp, SYS_TEMP_OFFSET, ix-1); \
1554 static SENSOR_DEVICE_ATTR_2(temp##ix##_alarm, S_IRUGO, \
1555 show_temp, NULL, SYS_TEMP_ALARM, ix-1); \
1556 static SENSOR_DEVICE_ATTR_2(temp##ix##_fault, S_IRUGO, \
1557 show_temp, NULL, SYS_TEMP_FAULT, ix-1)
1558
1559 SENSOR_DEVICE_ATTR_TEMP(1);
1560 SENSOR_DEVICE_ATTR_TEMP(2);
1561 SENSOR_DEVICE_ATTR_TEMP(3);
1562
1563 /* Zones 1-3 */
1564
1565 #define SENSOR_DEVICE_ATTR_ZONE(ix) \
1566 static SENSOR_DEVICE_ATTR_2(zone##ix##_auto_channels_temp, S_IRUGO, \
1567 show_zone, NULL, SYS_ZONE_AUTO_CHANNELS_TEMP, ix-1); \
1568 static SENSOR_DEVICE_ATTR_2(zone##ix##_auto_point1_temp_hyst, S_IRUGO, \
1569 show_zone, set_zone, SYS_ZONE_AUTO_POINT1_TEMP_HYST, ix-1); \
1570 static SENSOR_DEVICE_ATTR_2(zone##ix##_auto_point1_temp, S_IRUGO, \
1571 show_zone, set_zone, SYS_ZONE_AUTO_POINT1_TEMP, ix-1); \
1572 static SENSOR_DEVICE_ATTR_2(zone##ix##_auto_point2_temp, S_IRUGO, \
1573 show_zone, set_zone, SYS_ZONE_AUTO_POINT2_TEMP, ix-1); \
1574 static SENSOR_DEVICE_ATTR_2(zone##ix##_auto_point3_temp, S_IRUGO, \
1575 show_zone, set_zone, SYS_ZONE_AUTO_POINT3_TEMP, ix-1)
1576
1577 SENSOR_DEVICE_ATTR_ZONE(1);
1578 SENSOR_DEVICE_ATTR_ZONE(2);
1579 SENSOR_DEVICE_ATTR_ZONE(3);
1580
1581 /* Fans 1-4 */
1582
1583 #define SENSOR_DEVICE_ATTR_FAN_1TO4(ix) \
1584 static SENSOR_DEVICE_ATTR_2(fan##ix##_input, S_IRUGO, \
1585 show_fan, NULL, SYS_FAN_INPUT, ix-1); \
1586 static SENSOR_DEVICE_ATTR_2(fan##ix##_min, S_IRUGO | S_IWUSR, \
1587 show_fan, set_fan, SYS_FAN_MIN, ix-1); \
1588 static SENSOR_DEVICE_ATTR_2(fan##ix##_alarm, S_IRUGO, \
1589 show_fan, NULL, SYS_FAN_ALARM, ix-1); \
1590 static SENSOR_DEVICE_ATTR_2(fan##ix##_type, S_IRUGO | S_IWUSR, \
1591 show_fan, set_fan, SYS_FAN_TYPE, ix-1)
1592
1593 SENSOR_DEVICE_ATTR_FAN_1TO4(1);
1594 SENSOR_DEVICE_ATTR_FAN_1TO4(2);
1595 SENSOR_DEVICE_ATTR_FAN_1TO4(3);
1596 SENSOR_DEVICE_ATTR_FAN_1TO4(4);
1597
1598 /* Fans 5-6 */
1599
1600 #define SENSOR_DEVICE_ATTR_FAN_5TO6(ix) \
1601 static SENSOR_DEVICE_ATTR_2(fan##ix##_input, S_IRUGO, \
1602 show_fan, NULL, SYS_FAN_INPUT, ix-1); \
1603 static SENSOR_DEVICE_ATTR_2(fan##ix##_min, S_IRUGO | S_IWUSR, \
1604 show_fan, set_fan, SYS_FAN_MIN, ix-1); \
1605 static SENSOR_DEVICE_ATTR_2(fan##ix##_alarm, S_IRUGO, \
1606 show_fan, NULL, SYS_FAN_ALARM, ix-1); \
1607 static SENSOR_DEVICE_ATTR_2(fan##ix##_max, S_IRUGO | S_IWUSR, \
1608 show_fan, set_fan, SYS_FAN_MAX, ix-1)
1609
1610 SENSOR_DEVICE_ATTR_FAN_5TO6(5);
1611 SENSOR_DEVICE_ATTR_FAN_5TO6(6);
1612
1613 /* PWMs 1-3 */
1614
1615 #define SENSOR_DEVICE_ATTR_PWM_1TO3(ix) \
1616 static SENSOR_DEVICE_ATTR_2(pwm##ix, S_IRUGO, \
1617 show_pwm, set_pwm, SYS_PWM, ix-1); \
1618 static SENSOR_DEVICE_ATTR_2(pwm##ix##_freq, S_IRUGO, \
1619 show_pwm, set_pwm, SYS_PWM_FREQ, ix-1); \
1620 static SENSOR_DEVICE_ATTR_2(pwm##ix##_enable, S_IRUGO, \
1621 show_pwm, set_pwm, SYS_PWM_ENABLE, ix-1); \
1622 static SENSOR_DEVICE_ATTR_2(pwm##ix##_ramp_rate, S_IRUGO, \
1623 show_pwm, set_pwm, SYS_PWM_RAMP_RATE, ix-1); \
1624 static SENSOR_DEVICE_ATTR_2(pwm##ix##_auto_channels_zone, S_IRUGO, \
1625 show_pwm, set_pwm, SYS_PWM_AUTO_CHANNELS_ZONE, ix-1); \
1626 static SENSOR_DEVICE_ATTR_2(pwm##ix##_auto_pwm_min, S_IRUGO, \
1627 show_pwm, set_pwm, SYS_PWM_AUTO_PWM_MIN, ix-1); \
1628 static SENSOR_DEVICE_ATTR_2(pwm##ix##_auto_point1_pwm, S_IRUGO, \
1629 show_pwm, set_pwm, SYS_PWM_AUTO_POINT1_PWM, ix-1); \
1630 static SENSOR_DEVICE_ATTR_2(pwm##ix##_auto_point2_pwm, S_IRUGO, \
1631 show_pwm, NULL, SYS_PWM_AUTO_POINT2_PWM, ix-1)
1632
1633 SENSOR_DEVICE_ATTR_PWM_1TO3(1);
1634 SENSOR_DEVICE_ATTR_PWM_1TO3(2);
1635 SENSOR_DEVICE_ATTR_PWM_1TO3(3);
1636
1637 /* PWMs 5-6 */
1638
1639 #define SENSOR_DEVICE_ATTR_PWM_5TO6(ix) \
1640 static SENSOR_DEVICE_ATTR_2(pwm##ix, S_IRUGO, \
1641 show_pwm, set_pwm, SYS_PWM, ix-1); \
1642 static SENSOR_DEVICE_ATTR_2(pwm##ix##_freq, S_IRUGO, \
1643 show_pwm, set_pwm, SYS_PWM_FREQ, ix-1); \
1644 static SENSOR_DEVICE_ATTR_2(pwm##ix##_enable, S_IRUGO, \
1645 show_pwm, NULL, SYS_PWM_ENABLE, ix-1)
1646
1647 SENSOR_DEVICE_ATTR_PWM_5TO6(5);
1648 SENSOR_DEVICE_ATTR_PWM_5TO6(6);
1649
1650 /* Misc */
1651
1652 static DEVICE_ATTR_RW(vrm);
1653 static DEVICE_ATTR_RO(cpu0_vid);
1654 static DEVICE_ATTR_RO(name); /* for ISA devices */
1655
1656 /*
1657 * This struct holds all the attributes that are always present and need to be
1658 * created unconditionally. The attributes that need modification of their
1659 * permissions are created read-only and write permissions are added or removed
1660 * on the fly when required
1661 */
1662 static struct attribute *dme1737_attr[] = {
1663 /* Voltages */
1664 &sensor_dev_attr_in0_input.dev_attr.attr,
1665 &sensor_dev_attr_in0_min.dev_attr.attr,
1666 &sensor_dev_attr_in0_max.dev_attr.attr,
1667 &sensor_dev_attr_in0_alarm.dev_attr.attr,
1668 &sensor_dev_attr_in1_input.dev_attr.attr,
1669 &sensor_dev_attr_in1_min.dev_attr.attr,
1670 &sensor_dev_attr_in1_max.dev_attr.attr,
1671 &sensor_dev_attr_in1_alarm.dev_attr.attr,
1672 &sensor_dev_attr_in2_input.dev_attr.attr,
1673 &sensor_dev_attr_in2_min.dev_attr.attr,
1674 &sensor_dev_attr_in2_max.dev_attr.attr,
1675 &sensor_dev_attr_in2_alarm.dev_attr.attr,
1676 &sensor_dev_attr_in3_input.dev_attr.attr,
1677 &sensor_dev_attr_in3_min.dev_attr.attr,
1678 &sensor_dev_attr_in3_max.dev_attr.attr,
1679 &sensor_dev_attr_in3_alarm.dev_attr.attr,
1680 &sensor_dev_attr_in4_input.dev_attr.attr,
1681 &sensor_dev_attr_in4_min.dev_attr.attr,
1682 &sensor_dev_attr_in4_max.dev_attr.attr,
1683 &sensor_dev_attr_in4_alarm.dev_attr.attr,
1684 &sensor_dev_attr_in5_input.dev_attr.attr,
1685 &sensor_dev_attr_in5_min.dev_attr.attr,
1686 &sensor_dev_attr_in5_max.dev_attr.attr,
1687 &sensor_dev_attr_in5_alarm.dev_attr.attr,
1688 &sensor_dev_attr_in6_input.dev_attr.attr,
1689 &sensor_dev_attr_in6_min.dev_attr.attr,
1690 &sensor_dev_attr_in6_max.dev_attr.attr,
1691 &sensor_dev_attr_in6_alarm.dev_attr.attr,
1692 /* Temperatures */
1693 &sensor_dev_attr_temp1_input.dev_attr.attr,
1694 &sensor_dev_attr_temp1_min.dev_attr.attr,
1695 &sensor_dev_attr_temp1_max.dev_attr.attr,
1696 &sensor_dev_attr_temp1_alarm.dev_attr.attr,
1697 &sensor_dev_attr_temp1_fault.dev_attr.attr,
1698 &sensor_dev_attr_temp2_input.dev_attr.attr,
1699 &sensor_dev_attr_temp2_min.dev_attr.attr,
1700 &sensor_dev_attr_temp2_max.dev_attr.attr,
1701 &sensor_dev_attr_temp2_alarm.dev_attr.attr,
1702 &sensor_dev_attr_temp2_fault.dev_attr.attr,
1703 &sensor_dev_attr_temp3_input.dev_attr.attr,
1704 &sensor_dev_attr_temp3_min.dev_attr.attr,
1705 &sensor_dev_attr_temp3_max.dev_attr.attr,
1706 &sensor_dev_attr_temp3_alarm.dev_attr.attr,
1707 &sensor_dev_attr_temp3_fault.dev_attr.attr,
1708 /* Zones */
1709 &sensor_dev_attr_zone1_auto_point1_temp.dev_attr.attr,
1710 &sensor_dev_attr_zone1_auto_point2_temp.dev_attr.attr,
1711 &sensor_dev_attr_zone1_auto_point3_temp.dev_attr.attr,
1712 &sensor_dev_attr_zone1_auto_channels_temp.dev_attr.attr,
1713 &sensor_dev_attr_zone2_auto_point1_temp.dev_attr.attr,
1714 &sensor_dev_attr_zone2_auto_point2_temp.dev_attr.attr,
1715 &sensor_dev_attr_zone2_auto_point3_temp.dev_attr.attr,
1716 &sensor_dev_attr_zone2_auto_channels_temp.dev_attr.attr,
1717 NULL
1718 };
1719
1720 static const struct attribute_group dme1737_group = {
1721 .attrs = dme1737_attr,
1722 };
1723
1724 /*
1725 * The following struct holds temp offset attributes, which are not available
1726 * in all chips. The following chips support them:
1727 * DME1737, SCH311x
1728 */
1729 static struct attribute *dme1737_temp_offset_attr[] = {
1730 &sensor_dev_attr_temp1_offset.dev_attr.attr,
1731 &sensor_dev_attr_temp2_offset.dev_attr.attr,
1732 &sensor_dev_attr_temp3_offset.dev_attr.attr,
1733 NULL
1734 };
1735
1736 static const struct attribute_group dme1737_temp_offset_group = {
1737 .attrs = dme1737_temp_offset_attr,
1738 };
1739
1740 /*
1741 * The following struct holds VID related attributes, which are not available
1742 * in all chips. The following chips support them:
1743 * DME1737
1744 */
1745 static struct attribute *dme1737_vid_attr[] = {
1746 &dev_attr_vrm.attr,
1747 &dev_attr_cpu0_vid.attr,
1748 NULL
1749 };
1750
1751 static const struct attribute_group dme1737_vid_group = {
1752 .attrs = dme1737_vid_attr,
1753 };
1754
1755 /*
1756 * The following struct holds temp zone 3 related attributes, which are not
1757 * available in all chips. The following chips support them:
1758 * DME1737, SCH311x, SCH5027
1759 */
1760 static struct attribute *dme1737_zone3_attr[] = {
1761 &sensor_dev_attr_zone3_auto_point1_temp.dev_attr.attr,
1762 &sensor_dev_attr_zone3_auto_point2_temp.dev_attr.attr,
1763 &sensor_dev_attr_zone3_auto_point3_temp.dev_attr.attr,
1764 &sensor_dev_attr_zone3_auto_channels_temp.dev_attr.attr,
1765 NULL
1766 };
1767
1768 static const struct attribute_group dme1737_zone3_group = {
1769 .attrs = dme1737_zone3_attr,
1770 };
1771
1772
1773 /*
1774 * The following struct holds temp zone hysteresis related attributes, which
1775 * are not available in all chips. The following chips support them:
1776 * DME1737, SCH311x
1777 */
1778 static struct attribute *dme1737_zone_hyst_attr[] = {
1779 &sensor_dev_attr_zone1_auto_point1_temp_hyst.dev_attr.attr,
1780 &sensor_dev_attr_zone2_auto_point1_temp_hyst.dev_attr.attr,
1781 &sensor_dev_attr_zone3_auto_point1_temp_hyst.dev_attr.attr,
1782 NULL
1783 };
1784
1785 static const struct attribute_group dme1737_zone_hyst_group = {
1786 .attrs = dme1737_zone_hyst_attr,
1787 };
1788
1789 /*
1790 * The following struct holds voltage in7 related attributes, which
1791 * are not available in all chips. The following chips support them:
1792 * SCH5127
1793 */
1794 static struct attribute *dme1737_in7_attr[] = {
1795 &sensor_dev_attr_in7_input.dev_attr.attr,
1796 &sensor_dev_attr_in7_min.dev_attr.attr,
1797 &sensor_dev_attr_in7_max.dev_attr.attr,
1798 &sensor_dev_attr_in7_alarm.dev_attr.attr,
1799 NULL
1800 };
1801
1802 static const struct attribute_group dme1737_in7_group = {
1803 .attrs = dme1737_in7_attr,
1804 };
1805
1806 /*
1807 * The following structs hold the PWM attributes, some of which are optional.
1808 * Their creation depends on the chip configuration which is determined during
1809 * module load.
1810 */
1811 static struct attribute *dme1737_pwm1_attr[] = {
1812 &sensor_dev_attr_pwm1.dev_attr.attr,
1813 &sensor_dev_attr_pwm1_freq.dev_attr.attr,
1814 &sensor_dev_attr_pwm1_enable.dev_attr.attr,
1815 &sensor_dev_attr_pwm1_ramp_rate.dev_attr.attr,
1816 &sensor_dev_attr_pwm1_auto_channels_zone.dev_attr.attr,
1817 &sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr,
1818 &sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr,
1819 NULL
1820 };
1821 static struct attribute *dme1737_pwm2_attr[] = {
1822 &sensor_dev_attr_pwm2.dev_attr.attr,
1823 &sensor_dev_attr_pwm2_freq.dev_attr.attr,
1824 &sensor_dev_attr_pwm2_enable.dev_attr.attr,
1825 &sensor_dev_attr_pwm2_ramp_rate.dev_attr.attr,
1826 &sensor_dev_attr_pwm2_auto_channels_zone.dev_attr.attr,
1827 &sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr,
1828 &sensor_dev_attr_pwm2_auto_point2_pwm.dev_attr.attr,
1829 NULL
1830 };
1831 static struct attribute *dme1737_pwm3_attr[] = {
1832 &sensor_dev_attr_pwm3.dev_attr.attr,
1833 &sensor_dev_attr_pwm3_freq.dev_attr.attr,
1834 &sensor_dev_attr_pwm3_enable.dev_attr.attr,
1835 &sensor_dev_attr_pwm3_ramp_rate.dev_attr.attr,
1836 &sensor_dev_attr_pwm3_auto_channels_zone.dev_attr.attr,
1837 &sensor_dev_attr_pwm3_auto_point1_pwm.dev_attr.attr,
1838 &sensor_dev_attr_pwm3_auto_point2_pwm.dev_attr.attr,
1839 NULL
1840 };
1841 static struct attribute *dme1737_pwm5_attr[] = {
1842 &sensor_dev_attr_pwm5.dev_attr.attr,
1843 &sensor_dev_attr_pwm5_freq.dev_attr.attr,
1844 &sensor_dev_attr_pwm5_enable.dev_attr.attr,
1845 NULL
1846 };
1847 static struct attribute *dme1737_pwm6_attr[] = {
1848 &sensor_dev_attr_pwm6.dev_attr.attr,
1849 &sensor_dev_attr_pwm6_freq.dev_attr.attr,
1850 &sensor_dev_attr_pwm6_enable.dev_attr.attr,
1851 NULL
1852 };
1853
1854 static const struct attribute_group dme1737_pwm_group[] = {
1855 { .attrs = dme1737_pwm1_attr },
1856 { .attrs = dme1737_pwm2_attr },
1857 { .attrs = dme1737_pwm3_attr },
1858 { .attrs = NULL },
1859 { .attrs = dme1737_pwm5_attr },
1860 { .attrs = dme1737_pwm6_attr },
1861 };
1862
1863 /*
1864 * The following struct holds auto PWM min attributes, which are not available
1865 * in all chips. Their creation depends on the chip type which is determined
1866 * during module load.
1867 */
1868 static struct attribute *dme1737_auto_pwm_min_attr[] = {
1869 &sensor_dev_attr_pwm1_auto_pwm_min.dev_attr.attr,
1870 &sensor_dev_attr_pwm2_auto_pwm_min.dev_attr.attr,
1871 &sensor_dev_attr_pwm3_auto_pwm_min.dev_attr.attr,
1872 };
1873
1874 /*
1875 * The following structs hold the fan attributes, some of which are optional.
1876 * Their creation depends on the chip configuration which is determined during
1877 * module load.
1878 */
1879 static struct attribute *dme1737_fan1_attr[] = {
1880 &sensor_dev_attr_fan1_input.dev_attr.attr,
1881 &sensor_dev_attr_fan1_min.dev_attr.attr,
1882 &sensor_dev_attr_fan1_alarm.dev_attr.attr,
1883 &sensor_dev_attr_fan1_type.dev_attr.attr,
1884 NULL
1885 };
1886 static struct attribute *dme1737_fan2_attr[] = {
1887 &sensor_dev_attr_fan2_input.dev_attr.attr,
1888 &sensor_dev_attr_fan2_min.dev_attr.attr,
1889 &sensor_dev_attr_fan2_alarm.dev_attr.attr,
1890 &sensor_dev_attr_fan2_type.dev_attr.attr,
1891 NULL
1892 };
1893 static struct attribute *dme1737_fan3_attr[] = {
1894 &sensor_dev_attr_fan3_input.dev_attr.attr,
1895 &sensor_dev_attr_fan3_min.dev_attr.attr,
1896 &sensor_dev_attr_fan3_alarm.dev_attr.attr,
1897 &sensor_dev_attr_fan3_type.dev_attr.attr,
1898 NULL
1899 };
1900 static struct attribute *dme1737_fan4_attr[] = {
1901 &sensor_dev_attr_fan4_input.dev_attr.attr,
1902 &sensor_dev_attr_fan4_min.dev_attr.attr,
1903 &sensor_dev_attr_fan4_alarm.dev_attr.attr,
1904 &sensor_dev_attr_fan4_type.dev_attr.attr,
1905 NULL
1906 };
1907 static struct attribute *dme1737_fan5_attr[] = {
1908 &sensor_dev_attr_fan5_input.dev_attr.attr,
1909 &sensor_dev_attr_fan5_min.dev_attr.attr,
1910 &sensor_dev_attr_fan5_alarm.dev_attr.attr,
1911 &sensor_dev_attr_fan5_max.dev_attr.attr,
1912 NULL
1913 };
1914 static struct attribute *dme1737_fan6_attr[] = {
1915 &sensor_dev_attr_fan6_input.dev_attr.attr,
1916 &sensor_dev_attr_fan6_min.dev_attr.attr,
1917 &sensor_dev_attr_fan6_alarm.dev_attr.attr,
1918 &sensor_dev_attr_fan6_max.dev_attr.attr,
1919 NULL
1920 };
1921
1922 static const struct attribute_group dme1737_fan_group[] = {
1923 { .attrs = dme1737_fan1_attr },
1924 { .attrs = dme1737_fan2_attr },
1925 { .attrs = dme1737_fan3_attr },
1926 { .attrs = dme1737_fan4_attr },
1927 { .attrs = dme1737_fan5_attr },
1928 { .attrs = dme1737_fan6_attr },
1929 };
1930
1931 /*
1932 * The permissions of the following zone attributes are changed to read-
1933 * writeable if the chip is *not* locked. Otherwise they stay read-only.
1934 */
1935 static struct attribute *dme1737_zone_chmod_attr[] = {
1936 &sensor_dev_attr_zone1_auto_point1_temp.dev_attr.attr,
1937 &sensor_dev_attr_zone1_auto_point2_temp.dev_attr.attr,
1938 &sensor_dev_attr_zone1_auto_point3_temp.dev_attr.attr,
1939 &sensor_dev_attr_zone2_auto_point1_temp.dev_attr.attr,
1940 &sensor_dev_attr_zone2_auto_point2_temp.dev_attr.attr,
1941 &sensor_dev_attr_zone2_auto_point3_temp.dev_attr.attr,
1942 NULL
1943 };
1944
1945 static const struct attribute_group dme1737_zone_chmod_group = {
1946 .attrs = dme1737_zone_chmod_attr,
1947 };
1948
1949
1950 /*
1951 * The permissions of the following zone 3 attributes are changed to read-
1952 * writeable if the chip is *not* locked. Otherwise they stay read-only.
1953 */
1954 static struct attribute *dme1737_zone3_chmod_attr[] = {
1955 &sensor_dev_attr_zone3_auto_point1_temp.dev_attr.attr,
1956 &sensor_dev_attr_zone3_auto_point2_temp.dev_attr.attr,
1957 &sensor_dev_attr_zone3_auto_point3_temp.dev_attr.attr,
1958 NULL
1959 };
1960
1961 static const struct attribute_group dme1737_zone3_chmod_group = {
1962 .attrs = dme1737_zone3_chmod_attr,
1963 };
1964
1965 /*
1966 * The permissions of the following PWM attributes are changed to read-
1967 * writeable if the chip is *not* locked and the respective PWM is available.
1968 * Otherwise they stay read-only.
1969 */
1970 static struct attribute *dme1737_pwm1_chmod_attr[] = {
1971 &sensor_dev_attr_pwm1_freq.dev_attr.attr,
1972 &sensor_dev_attr_pwm1_enable.dev_attr.attr,
1973 &sensor_dev_attr_pwm1_ramp_rate.dev_attr.attr,
1974 &sensor_dev_attr_pwm1_auto_channels_zone.dev_attr.attr,
1975 &sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr,
1976 NULL
1977 };
1978 static struct attribute *dme1737_pwm2_chmod_attr[] = {
1979 &sensor_dev_attr_pwm2_freq.dev_attr.attr,
1980 &sensor_dev_attr_pwm2_enable.dev_attr.attr,
1981 &sensor_dev_attr_pwm2_ramp_rate.dev_attr.attr,
1982 &sensor_dev_attr_pwm2_auto_channels_zone.dev_attr.attr,
1983 &sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr,
1984 NULL
1985 };
1986 static struct attribute *dme1737_pwm3_chmod_attr[] = {
1987 &sensor_dev_attr_pwm3_freq.dev_attr.attr,
1988 &sensor_dev_attr_pwm3_enable.dev_attr.attr,
1989 &sensor_dev_attr_pwm3_ramp_rate.dev_attr.attr,
1990 &sensor_dev_attr_pwm3_auto_channels_zone.dev_attr.attr,
1991 &sensor_dev_attr_pwm3_auto_point1_pwm.dev_attr.attr,
1992 NULL
1993 };
1994 static struct attribute *dme1737_pwm5_chmod_attr[] = {
1995 &sensor_dev_attr_pwm5.dev_attr.attr,
1996 &sensor_dev_attr_pwm5_freq.dev_attr.attr,
1997 NULL
1998 };
1999 static struct attribute *dme1737_pwm6_chmod_attr[] = {
2000 &sensor_dev_attr_pwm6.dev_attr.attr,
2001 &sensor_dev_attr_pwm6_freq.dev_attr.attr,
2002 NULL
2003 };
2004
2005 static const struct attribute_group dme1737_pwm_chmod_group[] = {
2006 { .attrs = dme1737_pwm1_chmod_attr },
2007 { .attrs = dme1737_pwm2_chmod_attr },
2008 { .attrs = dme1737_pwm3_chmod_attr },
2009 { .attrs = NULL },
2010 { .attrs = dme1737_pwm5_chmod_attr },
2011 { .attrs = dme1737_pwm6_chmod_attr },
2012 };
2013
2014 /*
2015 * Pwm[1-3] are read-writeable if the associated pwm is in manual mode and the
2016 * chip is not locked. Otherwise they are read-only.
2017 */
2018 static struct attribute *dme1737_pwm_chmod_attr[] = {
2019 &sensor_dev_attr_pwm1.dev_attr.attr,
2020 &sensor_dev_attr_pwm2.dev_attr.attr,
2021 &sensor_dev_attr_pwm3.dev_attr.attr,
2022 };
2023
2024 /* ---------------------------------------------------------------------
2025 * Super-IO functions
2026 * --------------------------------------------------------------------- */
2027
dme1737_sio_enter(int sio_cip)2028 static inline void dme1737_sio_enter(int sio_cip)
2029 {
2030 outb(0x55, sio_cip);
2031 }
2032
dme1737_sio_exit(int sio_cip)2033 static inline void dme1737_sio_exit(int sio_cip)
2034 {
2035 outb(0xaa, sio_cip);
2036 }
2037
dme1737_sio_inb(int sio_cip,int reg)2038 static inline int dme1737_sio_inb(int sio_cip, int reg)
2039 {
2040 outb(reg, sio_cip);
2041 return inb(sio_cip + 1);
2042 }
2043
dme1737_sio_outb(int sio_cip,int reg,int val)2044 static inline void dme1737_sio_outb(int sio_cip, int reg, int val)
2045 {
2046 outb(reg, sio_cip);
2047 outb(val, sio_cip + 1);
2048 }
2049
2050 /* ---------------------------------------------------------------------
2051 * Device initialization
2052 * --------------------------------------------------------------------- */
2053
2054 static int dme1737_i2c_get_features(int, struct dme1737_data*);
2055
dme1737_chmod_file(struct device * dev,struct attribute * attr,umode_t mode)2056 static void dme1737_chmod_file(struct device *dev,
2057 struct attribute *attr, umode_t mode)
2058 {
2059 if (sysfs_chmod_file(&dev->kobj, attr, mode)) {
2060 dev_warn(dev, "Failed to change permissions of %s.\n",
2061 attr->name);
2062 }
2063 }
2064
dme1737_chmod_group(struct device * dev,const struct attribute_group * group,umode_t mode)2065 static void dme1737_chmod_group(struct device *dev,
2066 const struct attribute_group *group,
2067 umode_t mode)
2068 {
2069 struct attribute **attr;
2070
2071 for (attr = group->attrs; *attr; attr++)
2072 dme1737_chmod_file(dev, *attr, mode);
2073 }
2074
dme1737_remove_files(struct device * dev)2075 static void dme1737_remove_files(struct device *dev)
2076 {
2077 struct dme1737_data *data = dev_get_drvdata(dev);
2078 int ix;
2079
2080 for (ix = 0; ix < ARRAY_SIZE(dme1737_fan_group); ix++) {
2081 if (data->has_features & HAS_FAN(ix)) {
2082 sysfs_remove_group(&dev->kobj,
2083 &dme1737_fan_group[ix]);
2084 }
2085 }
2086
2087 for (ix = 0; ix < ARRAY_SIZE(dme1737_pwm_group); ix++) {
2088 if (data->has_features & HAS_PWM(ix)) {
2089 sysfs_remove_group(&dev->kobj,
2090 &dme1737_pwm_group[ix]);
2091 if ((data->has_features & HAS_PWM_MIN) && ix < 3) {
2092 sysfs_remove_file(&dev->kobj,
2093 dme1737_auto_pwm_min_attr[ix]);
2094 }
2095 }
2096 }
2097
2098 if (data->has_features & HAS_TEMP_OFFSET)
2099 sysfs_remove_group(&dev->kobj, &dme1737_temp_offset_group);
2100 if (data->has_features & HAS_VID)
2101 sysfs_remove_group(&dev->kobj, &dme1737_vid_group);
2102 if (data->has_features & HAS_ZONE3)
2103 sysfs_remove_group(&dev->kobj, &dme1737_zone3_group);
2104 if (data->has_features & HAS_ZONE_HYST)
2105 sysfs_remove_group(&dev->kobj, &dme1737_zone_hyst_group);
2106 if (data->has_features & HAS_IN7)
2107 sysfs_remove_group(&dev->kobj, &dme1737_in7_group);
2108 sysfs_remove_group(&dev->kobj, &dme1737_group);
2109
2110 if (!data->client)
2111 sysfs_remove_file(&dev->kobj, &dev_attr_name.attr);
2112 }
2113
dme1737_create_files(struct device * dev)2114 static int dme1737_create_files(struct device *dev)
2115 {
2116 struct dme1737_data *data = dev_get_drvdata(dev);
2117 int err, ix;
2118
2119 /* Create a name attribute for ISA devices */
2120 if (!data->client) {
2121 err = sysfs_create_file(&dev->kobj, &dev_attr_name.attr);
2122 if (err)
2123 goto exit;
2124 }
2125
2126 /* Create standard sysfs attributes */
2127 err = sysfs_create_group(&dev->kobj, &dme1737_group);
2128 if (err)
2129 goto exit_remove;
2130
2131 /* Create chip-dependent sysfs attributes */
2132 if (data->has_features & HAS_TEMP_OFFSET) {
2133 err = sysfs_create_group(&dev->kobj,
2134 &dme1737_temp_offset_group);
2135 if (err)
2136 goto exit_remove;
2137 }
2138 if (data->has_features & HAS_VID) {
2139 err = sysfs_create_group(&dev->kobj, &dme1737_vid_group);
2140 if (err)
2141 goto exit_remove;
2142 }
2143 if (data->has_features & HAS_ZONE3) {
2144 err = sysfs_create_group(&dev->kobj, &dme1737_zone3_group);
2145 if (err)
2146 goto exit_remove;
2147 }
2148 if (data->has_features & HAS_ZONE_HYST) {
2149 err = sysfs_create_group(&dev->kobj, &dme1737_zone_hyst_group);
2150 if (err)
2151 goto exit_remove;
2152 }
2153 if (data->has_features & HAS_IN7) {
2154 err = sysfs_create_group(&dev->kobj, &dme1737_in7_group);
2155 if (err)
2156 goto exit_remove;
2157 }
2158
2159 /* Create fan sysfs attributes */
2160 for (ix = 0; ix < ARRAY_SIZE(dme1737_fan_group); ix++) {
2161 if (data->has_features & HAS_FAN(ix)) {
2162 err = sysfs_create_group(&dev->kobj,
2163 &dme1737_fan_group[ix]);
2164 if (err)
2165 goto exit_remove;
2166 }
2167 }
2168
2169 /* Create PWM sysfs attributes */
2170 for (ix = 0; ix < ARRAY_SIZE(dme1737_pwm_group); ix++) {
2171 if (data->has_features & HAS_PWM(ix)) {
2172 err = sysfs_create_group(&dev->kobj,
2173 &dme1737_pwm_group[ix]);
2174 if (err)
2175 goto exit_remove;
2176 if ((data->has_features & HAS_PWM_MIN) && (ix < 3)) {
2177 err = sysfs_create_file(&dev->kobj,
2178 dme1737_auto_pwm_min_attr[ix]);
2179 if (err)
2180 goto exit_remove;
2181 }
2182 }
2183 }
2184
2185 /*
2186 * Inform if the device is locked. Otherwise change the permissions of
2187 * selected attributes from read-only to read-writeable.
2188 */
2189 if (data->config & 0x02) {
2190 dev_info(dev,
2191 "Device is locked. Some attributes will be read-only.\n");
2192 } else {
2193 /* Change permissions of zone sysfs attributes */
2194 dme1737_chmod_group(dev, &dme1737_zone_chmod_group,
2195 S_IRUGO | S_IWUSR);
2196
2197 /* Change permissions of chip-dependent sysfs attributes */
2198 if (data->has_features & HAS_TEMP_OFFSET) {
2199 dme1737_chmod_group(dev, &dme1737_temp_offset_group,
2200 S_IRUGO | S_IWUSR);
2201 }
2202 if (data->has_features & HAS_ZONE3) {
2203 dme1737_chmod_group(dev, &dme1737_zone3_chmod_group,
2204 S_IRUGO | S_IWUSR);
2205 }
2206 if (data->has_features & HAS_ZONE_HYST) {
2207 dme1737_chmod_group(dev, &dme1737_zone_hyst_group,
2208 S_IRUGO | S_IWUSR);
2209 }
2210
2211 /* Change permissions of PWM sysfs attributes */
2212 for (ix = 0; ix < ARRAY_SIZE(dme1737_pwm_chmod_group); ix++) {
2213 if (data->has_features & HAS_PWM(ix)) {
2214 dme1737_chmod_group(dev,
2215 &dme1737_pwm_chmod_group[ix],
2216 S_IRUGO | S_IWUSR);
2217 if ((data->has_features & HAS_PWM_MIN) &&
2218 ix < 3) {
2219 dme1737_chmod_file(dev,
2220 dme1737_auto_pwm_min_attr[ix],
2221 S_IRUGO | S_IWUSR);
2222 }
2223 }
2224 }
2225
2226 /* Change permissions of pwm[1-3] if in manual mode */
2227 for (ix = 0; ix < 3; ix++) {
2228 if ((data->has_features & HAS_PWM(ix)) &&
2229 (PWM_EN_FROM_REG(data->pwm_config[ix]) == 1)) {
2230 dme1737_chmod_file(dev,
2231 dme1737_pwm_chmod_attr[ix],
2232 S_IRUGO | S_IWUSR);
2233 }
2234 }
2235 }
2236
2237 return 0;
2238
2239 exit_remove:
2240 dme1737_remove_files(dev);
2241 exit:
2242 return err;
2243 }
2244
dme1737_init_device(struct device * dev)2245 static int dme1737_init_device(struct device *dev)
2246 {
2247 struct dme1737_data *data = dev_get_drvdata(dev);
2248 struct i2c_client *client = data->client;
2249 int ix;
2250 u8 reg;
2251
2252 /* Point to the right nominal voltages array */
2253 data->in_nominal = IN_NOMINAL(data->type);
2254
2255 data->config = dme1737_read(data, DME1737_REG_CONFIG);
2256 /* Inform if part is not monitoring/started */
2257 if (!(data->config & 0x01)) {
2258 if (!force_start) {
2259 dev_err(dev,
2260 "Device is not monitoring. Use the force_start load parameter to override.\n");
2261 return -EFAULT;
2262 }
2263
2264 /* Force monitoring */
2265 data->config |= 0x01;
2266 dme1737_write(data, DME1737_REG_CONFIG, data->config);
2267 }
2268 /* Inform if part is not ready */
2269 if (!(data->config & 0x04)) {
2270 dev_err(dev, "Device is not ready.\n");
2271 return -EFAULT;
2272 }
2273
2274 /*
2275 * Determine which optional fan and pwm features are enabled (only
2276 * valid for I2C devices)
2277 */
2278 if (client) { /* I2C chip */
2279 data->config2 = dme1737_read(data, DME1737_REG_CONFIG2);
2280 /* Check if optional fan3 input is enabled */
2281 if (data->config2 & 0x04)
2282 data->has_features |= HAS_FAN(2);
2283
2284 /*
2285 * Fan4 and pwm3 are only available if the client's I2C address
2286 * is the default 0x2e. Otherwise the I/Os associated with
2287 * these functions are used for addr enable/select.
2288 */
2289 if (client->addr == 0x2e)
2290 data->has_features |= HAS_FAN(3) | HAS_PWM(2);
2291
2292 /*
2293 * Determine which of the optional fan[5-6] and pwm[5-6]
2294 * features are enabled. For this, we need to query the runtime
2295 * registers through the Super-IO LPC interface. Try both
2296 * config ports 0x2e and 0x4e.
2297 */
2298 if (dme1737_i2c_get_features(0x2e, data) &&
2299 dme1737_i2c_get_features(0x4e, data)) {
2300 dev_warn(dev,
2301 "Failed to query Super-IO for optional features.\n");
2302 }
2303 }
2304
2305 /* Fan[1-2] and pwm[1-2] are present in all chips */
2306 data->has_features |= HAS_FAN(0) | HAS_FAN(1) | HAS_PWM(0) | HAS_PWM(1);
2307
2308 /* Chip-dependent features */
2309 switch (data->type) {
2310 case dme1737:
2311 data->has_features |= HAS_TEMP_OFFSET | HAS_VID | HAS_ZONE3 |
2312 HAS_ZONE_HYST | HAS_PWM_MIN;
2313 break;
2314 case sch311x:
2315 data->has_features |= HAS_TEMP_OFFSET | HAS_ZONE3 |
2316 HAS_ZONE_HYST | HAS_PWM_MIN | HAS_FAN(2) | HAS_PWM(2);
2317 break;
2318 case sch5027:
2319 data->has_features |= HAS_ZONE3;
2320 break;
2321 case sch5127:
2322 data->has_features |= HAS_FAN(2) | HAS_PWM(2) | HAS_IN7;
2323 break;
2324 default:
2325 break;
2326 }
2327
2328 dev_info(dev,
2329 "Optional features: pwm3=%s, pwm5=%s, pwm6=%s, fan3=%s, fan4=%s, fan5=%s, fan6=%s.\n",
2330 (data->has_features & HAS_PWM(2)) ? "yes" : "no",
2331 (data->has_features & HAS_PWM(4)) ? "yes" : "no",
2332 (data->has_features & HAS_PWM(5)) ? "yes" : "no",
2333 (data->has_features & HAS_FAN(2)) ? "yes" : "no",
2334 (data->has_features & HAS_FAN(3)) ? "yes" : "no",
2335 (data->has_features & HAS_FAN(4)) ? "yes" : "no",
2336 (data->has_features & HAS_FAN(5)) ? "yes" : "no");
2337
2338 reg = dme1737_read(data, DME1737_REG_TACH_PWM);
2339 /* Inform if fan-to-pwm mapping differs from the default */
2340 if (client && reg != 0xa4) { /* I2C chip */
2341 dev_warn(dev,
2342 "Non-standard fan to pwm mapping: fan1->pwm%d, fan2->pwm%d, fan3->pwm%d, fan4->pwm%d. %s\n",
2343 (reg & 0x03) + 1, ((reg >> 2) & 0x03) + 1,
2344 ((reg >> 4) & 0x03) + 1, ((reg >> 6) & 0x03) + 1,
2345 DO_REPORT);
2346 } else if (!client && reg != 0x24) { /* ISA chip */
2347 dev_warn(dev,
2348 "Non-standard fan to pwm mapping: fan1->pwm%d, fan2->pwm%d, fan3->pwm%d. %s\n",
2349 (reg & 0x03) + 1, ((reg >> 2) & 0x03) + 1,
2350 ((reg >> 4) & 0x03) + 1, DO_REPORT);
2351 }
2352
2353 /*
2354 * Switch pwm[1-3] to manual mode if they are currently disabled and
2355 * set the duty-cycles to 0% (which is identical to the PWMs being
2356 * disabled).
2357 */
2358 if (!(data->config & 0x02)) {
2359 for (ix = 0; ix < 3; ix++) {
2360 data->pwm_config[ix] = dme1737_read(data,
2361 DME1737_REG_PWM_CONFIG(ix));
2362 if ((data->has_features & HAS_PWM(ix)) &&
2363 (PWM_EN_FROM_REG(data->pwm_config[ix]) == -1)) {
2364 dev_info(dev,
2365 "Switching pwm%d to manual mode.\n",
2366 ix + 1);
2367 data->pwm_config[ix] = PWM_EN_TO_REG(1,
2368 data->pwm_config[ix]);
2369 dme1737_write(data, DME1737_REG_PWM(ix), 0);
2370 dme1737_write(data,
2371 DME1737_REG_PWM_CONFIG(ix),
2372 data->pwm_config[ix]);
2373 }
2374 }
2375 }
2376
2377 /* Initialize the default PWM auto channels zone (acz) assignments */
2378 data->pwm_acz[0] = 1; /* pwm1 -> zone1 */
2379 data->pwm_acz[1] = 2; /* pwm2 -> zone2 */
2380 data->pwm_acz[2] = 4; /* pwm3 -> zone3 */
2381
2382 /* Set VRM */
2383 if (data->has_features & HAS_VID)
2384 data->vrm = vid_which_vrm();
2385
2386 return 0;
2387 }
2388
2389 /* ---------------------------------------------------------------------
2390 * I2C device detection and registration
2391 * --------------------------------------------------------------------- */
2392
2393 static struct i2c_driver dme1737_i2c_driver;
2394
dme1737_i2c_get_features(int sio_cip,struct dme1737_data * data)2395 static int dme1737_i2c_get_features(int sio_cip, struct dme1737_data *data)
2396 {
2397 int err = 0, reg;
2398 u16 addr;
2399
2400 dme1737_sio_enter(sio_cip);
2401
2402 /*
2403 * Check device ID
2404 * We currently know about two kinds of DME1737 and SCH5027.
2405 */
2406 reg = force_id ? force_id : dme1737_sio_inb(sio_cip, 0x20);
2407 if (!(reg == DME1737_ID_1 || reg == DME1737_ID_2 ||
2408 reg == SCH5027_ID)) {
2409 err = -ENODEV;
2410 goto exit;
2411 }
2412
2413 /* Select logical device A (runtime registers) */
2414 dme1737_sio_outb(sio_cip, 0x07, 0x0a);
2415
2416 /* Get the base address of the runtime registers */
2417 addr = (dme1737_sio_inb(sio_cip, 0x60) << 8) |
2418 dme1737_sio_inb(sio_cip, 0x61);
2419 if (!addr) {
2420 err = -ENODEV;
2421 goto exit;
2422 }
2423
2424 /*
2425 * Read the runtime registers to determine which optional features
2426 * are enabled and available. Bits [3:2] of registers 0x43-0x46 are set
2427 * to '10' if the respective feature is enabled.
2428 */
2429 if ((inb(addr + 0x43) & 0x0c) == 0x08) /* fan6 */
2430 data->has_features |= HAS_FAN(5);
2431 if ((inb(addr + 0x44) & 0x0c) == 0x08) /* pwm6 */
2432 data->has_features |= HAS_PWM(5);
2433 if ((inb(addr + 0x45) & 0x0c) == 0x08) /* fan5 */
2434 data->has_features |= HAS_FAN(4);
2435 if ((inb(addr + 0x46) & 0x0c) == 0x08) /* pwm5 */
2436 data->has_features |= HAS_PWM(4);
2437
2438 exit:
2439 dme1737_sio_exit(sio_cip);
2440
2441 return err;
2442 }
2443
2444 /* Return 0 if detection is successful, -ENODEV otherwise */
dme1737_i2c_detect(struct i2c_client * client,struct i2c_board_info * info)2445 static int dme1737_i2c_detect(struct i2c_client *client,
2446 struct i2c_board_info *info)
2447 {
2448 struct i2c_adapter *adapter = client->adapter;
2449 struct device *dev = &adapter->dev;
2450 u8 company, verstep = 0;
2451 const char *name;
2452
2453 if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
2454 return -ENODEV;
2455
2456 company = i2c_smbus_read_byte_data(client, DME1737_REG_COMPANY);
2457 verstep = i2c_smbus_read_byte_data(client, DME1737_REG_VERSTEP);
2458
2459 if (company == DME1737_COMPANY_SMSC &&
2460 verstep == SCH5027_VERSTEP) {
2461 name = "sch5027";
2462 } else if (company == DME1737_COMPANY_SMSC &&
2463 (verstep & DME1737_VERSTEP_MASK) == DME1737_VERSTEP) {
2464 name = "dme1737";
2465 } else {
2466 return -ENODEV;
2467 }
2468
2469 dev_info(dev, "Found a %s chip at 0x%02x (rev 0x%02x).\n",
2470 verstep == SCH5027_VERSTEP ? "SCH5027" : "DME1737",
2471 client->addr, verstep);
2472 strlcpy(info->type, name, I2C_NAME_SIZE);
2473
2474 return 0;
2475 }
2476
dme1737_i2c_probe(struct i2c_client * client,const struct i2c_device_id * id)2477 static int dme1737_i2c_probe(struct i2c_client *client,
2478 const struct i2c_device_id *id)
2479 {
2480 struct dme1737_data *data;
2481 struct device *dev = &client->dev;
2482 int err;
2483
2484 data = devm_kzalloc(dev, sizeof(struct dme1737_data), GFP_KERNEL);
2485 if (!data)
2486 return -ENOMEM;
2487
2488 i2c_set_clientdata(client, data);
2489 data->type = id->driver_data;
2490 data->client = client;
2491 data->name = client->name;
2492 mutex_init(&data->update_lock);
2493
2494 /* Initialize the DME1737 chip */
2495 err = dme1737_init_device(dev);
2496 if (err) {
2497 dev_err(dev, "Failed to initialize device.\n");
2498 return err;
2499 }
2500
2501 /* Create sysfs files */
2502 err = dme1737_create_files(dev);
2503 if (err) {
2504 dev_err(dev, "Failed to create sysfs files.\n");
2505 return err;
2506 }
2507
2508 /* Register device */
2509 data->hwmon_dev = hwmon_device_register(dev);
2510 if (IS_ERR(data->hwmon_dev)) {
2511 dev_err(dev, "Failed to register device.\n");
2512 err = PTR_ERR(data->hwmon_dev);
2513 goto exit_remove;
2514 }
2515
2516 return 0;
2517
2518 exit_remove:
2519 dme1737_remove_files(dev);
2520 return err;
2521 }
2522
dme1737_i2c_remove(struct i2c_client * client)2523 static int dme1737_i2c_remove(struct i2c_client *client)
2524 {
2525 struct dme1737_data *data = i2c_get_clientdata(client);
2526
2527 hwmon_device_unregister(data->hwmon_dev);
2528 dme1737_remove_files(&client->dev);
2529
2530 return 0;
2531 }
2532
2533 static const struct i2c_device_id dme1737_id[] = {
2534 { "dme1737", dme1737 },
2535 { "sch5027", sch5027 },
2536 { }
2537 };
2538 MODULE_DEVICE_TABLE(i2c, dme1737_id);
2539
2540 static struct i2c_driver dme1737_i2c_driver = {
2541 .class = I2C_CLASS_HWMON,
2542 .driver = {
2543 .name = "dme1737",
2544 },
2545 .probe = dme1737_i2c_probe,
2546 .remove = dme1737_i2c_remove,
2547 .id_table = dme1737_id,
2548 .detect = dme1737_i2c_detect,
2549 .address_list = normal_i2c,
2550 };
2551
2552 /* ---------------------------------------------------------------------
2553 * ISA device detection and registration
2554 * --------------------------------------------------------------------- */
2555
dme1737_isa_detect(int sio_cip,unsigned short * addr)2556 static int __init dme1737_isa_detect(int sio_cip, unsigned short *addr)
2557 {
2558 int err = 0, reg;
2559 unsigned short base_addr;
2560
2561 dme1737_sio_enter(sio_cip);
2562
2563 /*
2564 * Check device ID
2565 * We currently know about SCH3112, SCH3114, SCH3116, and SCH5127
2566 */
2567 reg = force_id ? force_id : dme1737_sio_inb(sio_cip, 0x20);
2568 if (!(reg == SCH3112_ID || reg == SCH3114_ID || reg == SCH3116_ID ||
2569 reg == SCH5127_ID)) {
2570 err = -ENODEV;
2571 goto exit;
2572 }
2573
2574 /* Select logical device A (runtime registers) */
2575 dme1737_sio_outb(sio_cip, 0x07, 0x0a);
2576
2577 /* Get the base address of the runtime registers */
2578 base_addr = (dme1737_sio_inb(sio_cip, 0x60) << 8) |
2579 dme1737_sio_inb(sio_cip, 0x61);
2580 if (!base_addr) {
2581 pr_err("Base address not set\n");
2582 err = -ENODEV;
2583 goto exit;
2584 }
2585
2586 /*
2587 * Access to the hwmon registers is through an index/data register
2588 * pair located at offset 0x70/0x71.
2589 */
2590 *addr = base_addr + 0x70;
2591
2592 exit:
2593 dme1737_sio_exit(sio_cip);
2594 return err;
2595 }
2596
dme1737_isa_device_add(unsigned short addr)2597 static int __init dme1737_isa_device_add(unsigned short addr)
2598 {
2599 struct resource res = {
2600 .start = addr,
2601 .end = addr + DME1737_EXTENT - 1,
2602 .name = "dme1737",
2603 .flags = IORESOURCE_IO,
2604 };
2605 int err;
2606
2607 err = acpi_check_resource_conflict(&res);
2608 if (err)
2609 goto exit;
2610
2611 pdev = platform_device_alloc("dme1737", addr);
2612 if (!pdev) {
2613 pr_err("Failed to allocate device\n");
2614 err = -ENOMEM;
2615 goto exit;
2616 }
2617
2618 err = platform_device_add_resources(pdev, &res, 1);
2619 if (err) {
2620 pr_err("Failed to add device resource (err = %d)\n", err);
2621 goto exit_device_put;
2622 }
2623
2624 err = platform_device_add(pdev);
2625 if (err) {
2626 pr_err("Failed to add device (err = %d)\n", err);
2627 goto exit_device_put;
2628 }
2629
2630 return 0;
2631
2632 exit_device_put:
2633 platform_device_put(pdev);
2634 pdev = NULL;
2635 exit:
2636 return err;
2637 }
2638
dme1737_isa_probe(struct platform_device * pdev)2639 static int dme1737_isa_probe(struct platform_device *pdev)
2640 {
2641 u8 company, device;
2642 struct resource *res;
2643 struct dme1737_data *data;
2644 struct device *dev = &pdev->dev;
2645 int err;
2646
2647 res = platform_get_resource(pdev, IORESOURCE_IO, 0);
2648 if (!devm_request_region(dev, res->start, DME1737_EXTENT, "dme1737")) {
2649 dev_err(dev, "Failed to request region 0x%04x-0x%04x.\n",
2650 (unsigned short)res->start,
2651 (unsigned short)res->start + DME1737_EXTENT - 1);
2652 return -EBUSY;
2653 }
2654
2655 data = devm_kzalloc(dev, sizeof(struct dme1737_data), GFP_KERNEL);
2656 if (!data)
2657 return -ENOMEM;
2658
2659 data->addr = res->start;
2660 platform_set_drvdata(pdev, data);
2661
2662 /* Skip chip detection if module is loaded with force_id parameter */
2663 switch (force_id) {
2664 case SCH3112_ID:
2665 case SCH3114_ID:
2666 case SCH3116_ID:
2667 data->type = sch311x;
2668 break;
2669 case SCH5127_ID:
2670 data->type = sch5127;
2671 break;
2672 default:
2673 company = dme1737_read(data, DME1737_REG_COMPANY);
2674 device = dme1737_read(data, DME1737_REG_DEVICE);
2675
2676 if ((company == DME1737_COMPANY_SMSC) &&
2677 (device == SCH311X_DEVICE)) {
2678 data->type = sch311x;
2679 } else if ((company == DME1737_COMPANY_SMSC) &&
2680 (device == SCH5127_DEVICE)) {
2681 data->type = sch5127;
2682 } else {
2683 return -ENODEV;
2684 }
2685 }
2686
2687 if (data->type == sch5127)
2688 data->name = "sch5127";
2689 else
2690 data->name = "sch311x";
2691
2692 /* Initialize the mutex */
2693 mutex_init(&data->update_lock);
2694
2695 dev_info(dev, "Found a %s chip at 0x%04x\n",
2696 data->type == sch5127 ? "SCH5127" : "SCH311x", data->addr);
2697
2698 /* Initialize the chip */
2699 err = dme1737_init_device(dev);
2700 if (err) {
2701 dev_err(dev, "Failed to initialize device.\n");
2702 return err;
2703 }
2704
2705 /* Create sysfs files */
2706 err = dme1737_create_files(dev);
2707 if (err) {
2708 dev_err(dev, "Failed to create sysfs files.\n");
2709 return err;
2710 }
2711
2712 /* Register device */
2713 data->hwmon_dev = hwmon_device_register(dev);
2714 if (IS_ERR(data->hwmon_dev)) {
2715 dev_err(dev, "Failed to register device.\n");
2716 err = PTR_ERR(data->hwmon_dev);
2717 goto exit_remove_files;
2718 }
2719
2720 return 0;
2721
2722 exit_remove_files:
2723 dme1737_remove_files(dev);
2724 return err;
2725 }
2726
dme1737_isa_remove(struct platform_device * pdev)2727 static int dme1737_isa_remove(struct platform_device *pdev)
2728 {
2729 struct dme1737_data *data = platform_get_drvdata(pdev);
2730
2731 hwmon_device_unregister(data->hwmon_dev);
2732 dme1737_remove_files(&pdev->dev);
2733
2734 return 0;
2735 }
2736
2737 static struct platform_driver dme1737_isa_driver = {
2738 .driver = {
2739 .name = "dme1737",
2740 },
2741 .probe = dme1737_isa_probe,
2742 .remove = dme1737_isa_remove,
2743 };
2744
2745 /* ---------------------------------------------------------------------
2746 * Module initialization and cleanup
2747 * --------------------------------------------------------------------- */
2748
dme1737_init(void)2749 static int __init dme1737_init(void)
2750 {
2751 int err;
2752 unsigned short addr;
2753
2754 err = i2c_add_driver(&dme1737_i2c_driver);
2755 if (err)
2756 goto exit;
2757
2758 if (dme1737_isa_detect(0x2e, &addr) &&
2759 dme1737_isa_detect(0x4e, &addr) &&
2760 (!probe_all_addr ||
2761 (dme1737_isa_detect(0x162e, &addr) &&
2762 dme1737_isa_detect(0x164e, &addr)))) {
2763 /* Return 0 if we didn't find an ISA device */
2764 return 0;
2765 }
2766
2767 err = platform_driver_register(&dme1737_isa_driver);
2768 if (err)
2769 goto exit_del_i2c_driver;
2770
2771 /* Sets global pdev as a side effect */
2772 err = dme1737_isa_device_add(addr);
2773 if (err)
2774 goto exit_del_isa_driver;
2775
2776 return 0;
2777
2778 exit_del_isa_driver:
2779 platform_driver_unregister(&dme1737_isa_driver);
2780 exit_del_i2c_driver:
2781 i2c_del_driver(&dme1737_i2c_driver);
2782 exit:
2783 return err;
2784 }
2785
dme1737_exit(void)2786 static void __exit dme1737_exit(void)
2787 {
2788 if (pdev) {
2789 platform_device_unregister(pdev);
2790 platform_driver_unregister(&dme1737_isa_driver);
2791 }
2792
2793 i2c_del_driver(&dme1737_i2c_driver);
2794 }
2795
2796 MODULE_AUTHOR("Juerg Haefliger <juergh@gmail.com>");
2797 MODULE_DESCRIPTION("DME1737 sensors");
2798 MODULE_LICENSE("GPL");
2799
2800 module_init(dme1737_init);
2801 module_exit(dme1737_exit);
2802
