1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 * Copyright (c) 2018, The Linux Foundation. All rights reserved.
4 */
5
6 /*
7 * In Certain QCOM SoCs like apq8096 and msm8996 that have KRYO processors,
8 * the CPU frequency subset and voltage value of each OPP varies
9 * based on the silicon variant in use. Qualcomm Process Voltage Scaling Tables
10 * defines the voltage and frequency value based on the msm-id in SMEM
11 * and speedbin blown in the efuse combination.
12 * The qcom-cpufreq-kryo driver reads the msm-id and efuse value from the SoC
13 * to provide the OPP framework with required information.
14 * This is used to determine the voltage and frequency value for each OPP of
15 * operating-points-v2 table when it is parsed by the OPP framework.
16 */
17
18 #include <linux/cpu.h>
19 #include <linux/err.h>
20 #include <linux/init.h>
21 #include <linux/kernel.h>
22 #include <linux/module.h>
23 #include <linux/nvmem-consumer.h>
24 #include <linux/of.h>
25 #include <linux/platform_device.h>
26 #include <linux/pm_opp.h>
27 #include <linux/slab.h>
28 #include <linux/soc/qcom/smem.h>
29
30 #define MSM_ID_SMEM 137
31
32 enum _msm_id {
33 MSM8996V3 = 0xF6ul,
34 APQ8096V3 = 0x123ul,
35 MSM8996SG = 0x131ul,
36 APQ8096SG = 0x138ul,
37 };
38
39 enum _msm8996_version {
40 MSM8996_V3,
41 MSM8996_SG,
42 NUM_OF_MSM8996_VERSIONS,
43 };
44
45 struct platform_device *cpufreq_dt_pdev, *kryo_cpufreq_pdev;
46
qcom_cpufreq_kryo_get_msm_id(void)47 static enum _msm8996_version qcom_cpufreq_kryo_get_msm_id(void)
48 {
49 size_t len;
50 u32 *msm_id;
51 enum _msm8996_version version;
52
53 msm_id = qcom_smem_get(QCOM_SMEM_HOST_ANY, MSM_ID_SMEM, &len);
54 if (IS_ERR(msm_id))
55 return NUM_OF_MSM8996_VERSIONS;
56
57 /* The first 4 bytes are format, next to them is the actual msm-id */
58 msm_id++;
59
60 switch ((enum _msm_id)*msm_id) {
61 case MSM8996V3:
62 case APQ8096V3:
63 version = MSM8996_V3;
64 break;
65 case MSM8996SG:
66 case APQ8096SG:
67 version = MSM8996_SG;
68 break;
69 default:
70 version = NUM_OF_MSM8996_VERSIONS;
71 }
72
73 return version;
74 }
75
qcom_cpufreq_kryo_probe(struct platform_device * pdev)76 static int qcom_cpufreq_kryo_probe(struct platform_device *pdev)
77 {
78 struct opp_table *opp_tables[NR_CPUS] = {0};
79 enum _msm8996_version msm8996_version;
80 struct nvmem_cell *speedbin_nvmem;
81 struct device_node *np;
82 struct device *cpu_dev;
83 unsigned cpu;
84 u8 *speedbin;
85 u32 versions;
86 size_t len;
87 int ret;
88
89 cpu_dev = get_cpu_device(0);
90 if (!cpu_dev)
91 return -ENODEV;
92
93 msm8996_version = qcom_cpufreq_kryo_get_msm_id();
94 if (NUM_OF_MSM8996_VERSIONS == msm8996_version) {
95 dev_err(cpu_dev, "Not Snapdragon 820/821!");
96 return -ENODEV;
97 }
98
99 np = dev_pm_opp_of_get_opp_desc_node(cpu_dev);
100 if (!np)
101 return -ENOENT;
102
103 ret = of_device_is_compatible(np, "operating-points-v2-kryo-cpu");
104 if (!ret) {
105 of_node_put(np);
106 return -ENOENT;
107 }
108
109 speedbin_nvmem = of_nvmem_cell_get(np, NULL);
110 of_node_put(np);
111 if (IS_ERR(speedbin_nvmem)) {
112 if (PTR_ERR(speedbin_nvmem) != -EPROBE_DEFER)
113 dev_err(cpu_dev, "Could not get nvmem cell: %ld\n",
114 PTR_ERR(speedbin_nvmem));
115 return PTR_ERR(speedbin_nvmem);
116 }
117
118 speedbin = nvmem_cell_read(speedbin_nvmem, &len);
119 nvmem_cell_put(speedbin_nvmem);
120 if (IS_ERR(speedbin))
121 return PTR_ERR(speedbin);
122
123 switch (msm8996_version) {
124 case MSM8996_V3:
125 versions = 1 << (unsigned int)(*speedbin);
126 break;
127 case MSM8996_SG:
128 versions = 1 << ((unsigned int)(*speedbin) + 4);
129 break;
130 default:
131 BUG();
132 break;
133 }
134 kfree(speedbin);
135
136 for_each_possible_cpu(cpu) {
137 cpu_dev = get_cpu_device(cpu);
138 if (NULL == cpu_dev) {
139 ret = -ENODEV;
140 goto free_opp;
141 }
142
143 opp_tables[cpu] = dev_pm_opp_set_supported_hw(cpu_dev,
144 &versions, 1);
145 if (IS_ERR(opp_tables[cpu])) {
146 ret = PTR_ERR(opp_tables[cpu]);
147 dev_err(cpu_dev, "Failed to set supported hardware\n");
148 goto free_opp;
149 }
150 }
151
152 cpufreq_dt_pdev = platform_device_register_simple("cpufreq-dt", -1,
153 NULL, 0);
154 if (!IS_ERR(cpufreq_dt_pdev))
155 return 0;
156
157 ret = PTR_ERR(cpufreq_dt_pdev);
158 dev_err(cpu_dev, "Failed to register platform device\n");
159
160 free_opp:
161 for_each_possible_cpu(cpu) {
162 if (IS_ERR_OR_NULL(opp_tables[cpu]))
163 break;
164 dev_pm_opp_put_supported_hw(opp_tables[cpu]);
165 }
166
167 return ret;
168 }
169
qcom_cpufreq_kryo_remove(struct platform_device * pdev)170 static int qcom_cpufreq_kryo_remove(struct platform_device *pdev)
171 {
172 platform_device_unregister(cpufreq_dt_pdev);
173 return 0;
174 }
175
176 static struct platform_driver qcom_cpufreq_kryo_driver = {
177 .probe = qcom_cpufreq_kryo_probe,
178 .remove = qcom_cpufreq_kryo_remove,
179 .driver = {
180 .name = "qcom-cpufreq-kryo",
181 },
182 };
183
184 static const struct of_device_id qcom_cpufreq_kryo_match_list[] __initconst = {
185 { .compatible = "qcom,apq8096", },
186 { .compatible = "qcom,msm8996", },
187 {}
188 };
189
190 /*
191 * Since the driver depends on smem and nvmem drivers, which may
192 * return EPROBE_DEFER, all the real activity is done in the probe,
193 * which may be defered as well. The init here is only registering
194 * the driver and the platform device.
195 */
qcom_cpufreq_kryo_init(void)196 static int __init qcom_cpufreq_kryo_init(void)
197 {
198 struct device_node *np = of_find_node_by_path("/");
199 const struct of_device_id *match;
200 int ret;
201
202 if (!np)
203 return -ENODEV;
204
205 match = of_match_node(qcom_cpufreq_kryo_match_list, np);
206 of_node_put(np);
207 if (!match)
208 return -ENODEV;
209
210 ret = platform_driver_register(&qcom_cpufreq_kryo_driver);
211 if (unlikely(ret < 0))
212 return ret;
213
214 kryo_cpufreq_pdev = platform_device_register_simple(
215 "qcom-cpufreq-kryo", -1, NULL, 0);
216 ret = PTR_ERR_OR_ZERO(kryo_cpufreq_pdev);
217 if (0 == ret)
218 return 0;
219
220 platform_driver_unregister(&qcom_cpufreq_kryo_driver);
221 return ret;
222 }
223 module_init(qcom_cpufreq_kryo_init);
224
qcom_cpufreq_kryo_exit(void)225 static void __exit qcom_cpufreq_kryo_exit(void)
226 {
227 platform_device_unregister(kryo_cpufreq_pdev);
228 platform_driver_unregister(&qcom_cpufreq_kryo_driver);
229 }
230 module_exit(qcom_cpufreq_kryo_exit);
231
232 MODULE_DESCRIPTION("Qualcomm Technologies, Inc. Kryo CPUfreq driver");
233 MODULE_LICENSE("GPL v2");
234
