1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  *	linux/arch/alpha/kernel/core_cia.c
4  *
5  * Written by David A Rusling (david.rusling@reo.mts.dec.com).
6  * December 1995.
7  *
8  *	Copyright (C) 1995  David A Rusling
9  *	Copyright (C) 1997, 1998  Jay Estabrook
10  *	Copyright (C) 1998, 1999, 2000  Richard Henderson
11  *
12  * Code common to all CIA core logic chips.
13  */
14 
15 #define __EXTERN_INLINE inline
16 #include <asm/io.h>
17 #include <asm/core_cia.h>
18 #undef __EXTERN_INLINE
19 
20 #include <linux/types.h>
21 #include <linux/pci.h>
22 #include <linux/sched.h>
23 #include <linux/init.h>
24 #include <linux/memblock.h>
25 
26 #include <asm/ptrace.h>
27 #include <asm/mce.h>
28 
29 #include "proto.h"
30 #include "pci_impl.h"
31 
32 
33 /*
34  * NOTE: Herein lie back-to-back mb instructions.  They are magic.
35  * One plausible explanation is that the i/o controller does not properly
36  * handle the system transaction.  Another involves timing.  Ho hum.
37  */
38 
39 #define DEBUG_CONFIG 0
40 #if DEBUG_CONFIG
41 # define DBGC(args)	printk args
42 #else
43 # define DBGC(args)
44 #endif
45 
46 #define vip	volatile int  *
47 
48 /*
49  * Given a bus, device, and function number, compute resulting
50  * configuration space address.  It is therefore not safe to have
51  * concurrent invocations to configuration space access routines, but
52  * there really shouldn't be any need for this.
53  *
54  * Type 0:
55  *
56  *  3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1
57  *  3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
58  * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
59  * | | |D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|F|F|F|R|R|R|R|R|R|0|0|
60  * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
61  *
62  *	31:11	Device select bit.
63  * 	10:8	Function number
64  * 	 7:2	Register number
65  *
66  * Type 1:
67  *
68  *  3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1
69  *  3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
70  * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
71  * | | | | | | | | | | |B|B|B|B|B|B|B|B|D|D|D|D|D|F|F|F|R|R|R|R|R|R|0|1|
72  * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
73  *
74  *	31:24	reserved
75  *	23:16	bus number (8 bits = 128 possible buses)
76  *	15:11	Device number (5 bits)
77  *	10:8	function number
78  *	 7:2	register number
79  *
80  * Notes:
81  *	The function number selects which function of a multi-function device
82  *	(e.g., SCSI and Ethernet).
83  *
84  *	The register selects a DWORD (32 bit) register offset.  Hence it
85  *	doesn't get shifted by 2 bits as we want to "drop" the bottom two
86  *	bits.
87  */
88 
89 static int
mk_conf_addr(struct pci_bus * bus_dev,unsigned int device_fn,int where,unsigned long * pci_addr,unsigned char * type1)90 mk_conf_addr(struct pci_bus *bus_dev, unsigned int device_fn, int where,
91 	     unsigned long *pci_addr, unsigned char *type1)
92 {
93 	u8 bus = bus_dev->number;
94 
95 	*type1 = (bus != 0);
96 	*pci_addr = (bus << 16) | (device_fn << 8) | where;
97 
98 	DBGC(("mk_conf_addr(bus=%d ,device_fn=0x%x, where=0x%x,"
99 	      " returning address 0x%p\n"
100 	      bus, device_fn, where, *pci_addr));
101 
102 	return 0;
103 }
104 
105 static unsigned int
conf_read(unsigned long addr,unsigned char type1)106 conf_read(unsigned long addr, unsigned char type1)
107 {
108 	unsigned long flags;
109 	int stat0, value;
110 	int cia_cfg = 0;
111 
112 	DBGC(("conf_read(addr=0x%lx, type1=%d) ", addr, type1));
113 	local_irq_save(flags);
114 
115 	/* Reset status register to avoid losing errors.  */
116 	stat0 = *(vip)CIA_IOC_CIA_ERR;
117 	*(vip)CIA_IOC_CIA_ERR = stat0;
118 	mb();
119 	*(vip)CIA_IOC_CIA_ERR; /* re-read to force write */
120 
121 	/* If Type1 access, must set CIA CFG. */
122 	if (type1) {
123 		cia_cfg = *(vip)CIA_IOC_CFG;
124 		*(vip)CIA_IOC_CFG = (cia_cfg & ~3) | 1;
125 		mb();
126 		*(vip)CIA_IOC_CFG;
127 	}
128 
129 	mb();
130 	draina();
131 	mcheck_expected(0) = 1;
132 	mcheck_taken(0) = 0;
133 	mb();
134 
135 	/* Access configuration space.  */
136 	value = *(vip)addr;
137 	mb();
138 	mb();  /* magic */
139 	if (mcheck_taken(0)) {
140 		mcheck_taken(0) = 0;
141 		value = 0xffffffff;
142 		mb();
143 	}
144 	mcheck_expected(0) = 0;
145 	mb();
146 
147 	/* If Type1 access, must reset IOC CFG so normal IO space ops work.  */
148 	if (type1) {
149 		*(vip)CIA_IOC_CFG = cia_cfg;
150 		mb();
151 		*(vip)CIA_IOC_CFG;
152 	}
153 
154 	local_irq_restore(flags);
155 	DBGC(("done\n"));
156 
157 	return value;
158 }
159 
160 static void
conf_write(unsigned long addr,unsigned int value,unsigned char type1)161 conf_write(unsigned long addr, unsigned int value, unsigned char type1)
162 {
163 	unsigned long flags;
164 	int stat0, cia_cfg = 0;
165 
166 	DBGC(("conf_write(addr=0x%lx, type1=%d) ", addr, type1));
167 	local_irq_save(flags);
168 
169 	/* Reset status register to avoid losing errors.  */
170 	stat0 = *(vip)CIA_IOC_CIA_ERR;
171 	*(vip)CIA_IOC_CIA_ERR = stat0;
172 	mb();
173 	*(vip)CIA_IOC_CIA_ERR; /* re-read to force write */
174 
175 	/* If Type1 access, must set CIA CFG.  */
176 	if (type1) {
177 		cia_cfg = *(vip)CIA_IOC_CFG;
178 		*(vip)CIA_IOC_CFG = (cia_cfg & ~3) | 1;
179 		mb();
180 		*(vip)CIA_IOC_CFG;
181 	}
182 
183 	mb();
184 	draina();
185 	mcheck_expected(0) = 1;
186 	mcheck_taken(0) = 0;
187 	mb();
188 
189 	/* Access configuration space.  */
190 	*(vip)addr = value;
191 	mb();
192 	*(vip)addr; /* read back to force the write */
193 
194 	mcheck_expected(0) = 0;
195 	mb();
196 
197 	/* If Type1 access, must reset IOC CFG so normal IO space ops work.  */
198 	if (type1) {
199 		*(vip)CIA_IOC_CFG = cia_cfg;
200 		mb();
201 		*(vip)CIA_IOC_CFG;
202 	}
203 
204 	local_irq_restore(flags);
205 	DBGC(("done\n"));
206 }
207 
208 static int
cia_read_config(struct pci_bus * bus,unsigned int devfn,int where,int size,u32 * value)209 cia_read_config(struct pci_bus *bus, unsigned int devfn, int where, int size,
210 		u32 *value)
211 {
212 	unsigned long addr, pci_addr;
213 	long mask;
214 	unsigned char type1;
215 	int shift;
216 
217 	if (mk_conf_addr(bus, devfn, where, &pci_addr, &type1))
218 		return PCIBIOS_DEVICE_NOT_FOUND;
219 
220 	mask = (size - 1) * 8;
221 	shift = (where & 3) * 8;
222 	addr = (pci_addr << 5) + mask + CIA_CONF;
223 	*value = conf_read(addr, type1) >> (shift);
224 	return PCIBIOS_SUCCESSFUL;
225 }
226 
227 static int
cia_write_config(struct pci_bus * bus,unsigned int devfn,int where,int size,u32 value)228 cia_write_config(struct pci_bus *bus, unsigned int devfn, int where, int size,
229 		 u32 value)
230 {
231 	unsigned long addr, pci_addr;
232 	long mask;
233 	unsigned char type1;
234 
235 	if (mk_conf_addr(bus, devfn, where, &pci_addr, &type1))
236 		return PCIBIOS_DEVICE_NOT_FOUND;
237 
238 	mask = (size - 1) * 8;
239 	addr = (pci_addr << 5) + mask + CIA_CONF;
240 	conf_write(addr, value << ((where & 3) * 8), type1);
241 	return PCIBIOS_SUCCESSFUL;
242 }
243 
244 struct pci_ops cia_pci_ops =
245 {
246 	.read = 	cia_read_config,
247 	.write =	cia_write_config,
248 };
249 
250 /*
251  * CIA Pass 1 and PYXIS Pass 1 and 2 have a broken scatter-gather tlb.
252  * It cannot be invalidated.  Rather than hard code the pass numbers,
253  * actually try the tbia to see if it works.
254  */
255 
256 void
cia_pci_tbi(struct pci_controller * hose,dma_addr_t start,dma_addr_t end)257 cia_pci_tbi(struct pci_controller *hose, dma_addr_t start, dma_addr_t end)
258 {
259 	wmb();
260 	*(vip)CIA_IOC_PCI_TBIA = 3;	/* Flush all locked and unlocked.  */
261 	mb();
262 	*(vip)CIA_IOC_PCI_TBIA;
263 }
264 
265 /*
266  * On PYXIS, even if the tbia works, we cannot use it. It effectively locks
267  * the chip (as well as direct write to the tag registers) if there is a
268  * SG DMA operation in progress. This is true at least for PYXIS rev. 1,
269  * so always use the method below.
270  */
271 /*
272  * This is the method NT and NetBSD use.
273  *
274  * Allocate mappings, and put the chip into DMA loopback mode to read a
275  * garbage page.  This works by causing TLB misses, causing old entries to
276  * be purged to make room for the new entries coming in for the garbage page.
277  */
278 
279 #define CIA_BROKEN_TBIA_BASE	0x30000000
280 #define CIA_BROKEN_TBIA_SIZE	1024
281 
282 /* Always called with interrupts disabled */
283 void
cia_pci_tbi_try2(struct pci_controller * hose,dma_addr_t start,dma_addr_t end)284 cia_pci_tbi_try2(struct pci_controller *hose,
285 		 dma_addr_t start, dma_addr_t end)
286 {
287 	void __iomem *bus_addr;
288 	int ctrl;
289 
290 	/* Put the chip into PCI loopback mode.  */
291 	mb();
292 	ctrl = *(vip)CIA_IOC_CIA_CTRL;
293 	*(vip)CIA_IOC_CIA_CTRL = ctrl | CIA_CTRL_PCI_LOOP_EN;
294 	mb();
295 	*(vip)CIA_IOC_CIA_CTRL;
296 	mb();
297 
298 	/* Read from PCI dense memory space at TBI_ADDR, skipping 32k on
299 	   each read.  This forces SG TLB misses.  NetBSD claims that the
300 	   TLB entries are not quite LRU, meaning that we need to read more
301 	   times than there are actual tags.  The 2117x docs claim strict
302 	   round-robin.  Oh well, we've come this far...  */
303 	/* Even better - as seen on the PYXIS rev 1 the TLB tags 0-3 can
304 	   be filled by the TLB misses *only once* after being invalidated
305 	   (by tbia or direct write). Next misses won't update them even
306 	   though the lock bits are cleared. Tags 4-7 are "quite LRU" though,
307 	   so use them and read at window 3 base exactly 4 times. Reading
308 	   more sometimes makes the chip crazy.  -ink */
309 
310 	bus_addr = cia_ioremap(CIA_BROKEN_TBIA_BASE, 32768 * 4);
311 
312 	cia_readl(bus_addr + 0x00000);
313 	cia_readl(bus_addr + 0x08000);
314 	cia_readl(bus_addr + 0x10000);
315 	cia_readl(bus_addr + 0x18000);
316 
317 	cia_iounmap(bus_addr);
318 
319 	/* Restore normal PCI operation.  */
320 	mb();
321 	*(vip)CIA_IOC_CIA_CTRL = ctrl;
322 	mb();
323 	*(vip)CIA_IOC_CIA_CTRL;
324 	mb();
325 }
326 
327 static inline void
cia_prepare_tbia_workaround(int window)328 cia_prepare_tbia_workaround(int window)
329 {
330 	unsigned long *ppte, pte;
331 	long i;
332 
333 	/* Use minimal 1K map. */
334 	ppte = memblock_alloc(CIA_BROKEN_TBIA_SIZE, 32768);
335 	if (!ppte)
336 		panic("%s: Failed to allocate %u bytes align=0x%x\n",
337 		      __func__, CIA_BROKEN_TBIA_SIZE, 32768);
338 	pte = (virt_to_phys(ppte) >> (PAGE_SHIFT - 1)) | 1;
339 
340 	for (i = 0; i < CIA_BROKEN_TBIA_SIZE / sizeof(unsigned long); ++i)
341 		ppte[i] = pte;
342 
343 	*(vip)CIA_IOC_PCI_Wn_BASE(window) = CIA_BROKEN_TBIA_BASE | 3;
344 	*(vip)CIA_IOC_PCI_Wn_MASK(window)
345 	  = (CIA_BROKEN_TBIA_SIZE*1024 - 1) & 0xfff00000;
346 	*(vip)CIA_IOC_PCI_Tn_BASE(window) = virt_to_phys(ppte) >> 2;
347 }
348 
349 static void __init
verify_tb_operation(void)350 verify_tb_operation(void)
351 {
352 	static int page[PAGE_SIZE/4]
353 		__attribute__((aligned(PAGE_SIZE)))
354 		__initdata = { 0 };
355 
356 	struct pci_iommu_arena *arena = pci_isa_hose->sg_isa;
357 	int ctrl, addr0, tag0, pte0, data0;
358 	int temp, use_tbia_try2 = 0;
359 	void __iomem *bus_addr;
360 
361 	/* pyxis -- tbia is broken */
362 	if (pci_isa_hose->dense_io_base)
363 		use_tbia_try2 = 1;
364 
365 	/* Put the chip into PCI loopback mode.  */
366 	mb();
367 	ctrl = *(vip)CIA_IOC_CIA_CTRL;
368 	*(vip)CIA_IOC_CIA_CTRL = ctrl | CIA_CTRL_PCI_LOOP_EN;
369 	mb();
370 	*(vip)CIA_IOC_CIA_CTRL;
371 	mb();
372 
373 	/* Write a valid entry directly into the TLB registers.  */
374 
375 	addr0 = arena->dma_base;
376 	tag0 = addr0 | 1;
377 	pte0 = (virt_to_phys(page) >> (PAGE_SHIFT - 1)) | 1;
378 
379 	*(vip)CIA_IOC_TB_TAGn(0) = tag0;
380 	*(vip)CIA_IOC_TB_TAGn(1) = 0;
381 	*(vip)CIA_IOC_TB_TAGn(2) = 0;
382 	*(vip)CIA_IOC_TB_TAGn(3) = 0;
383 	*(vip)CIA_IOC_TB_TAGn(4) = 0;
384 	*(vip)CIA_IOC_TB_TAGn(5) = 0;
385 	*(vip)CIA_IOC_TB_TAGn(6) = 0;
386 	*(vip)CIA_IOC_TB_TAGn(7) = 0;
387 	*(vip)CIA_IOC_TBn_PAGEm(0,0) = pte0;
388 	*(vip)CIA_IOC_TBn_PAGEm(0,1) = 0;
389 	*(vip)CIA_IOC_TBn_PAGEm(0,2) = 0;
390 	*(vip)CIA_IOC_TBn_PAGEm(0,3) = 0;
391 	mb();
392 
393 	/* Get a usable bus address */
394 	bus_addr = cia_ioremap(addr0, 8*PAGE_SIZE);
395 
396 	/* First, verify we can read back what we've written.  If
397 	   this fails, we can't be sure of any of the other testing
398 	   we're going to do, so bail.  */
399 	/* ??? Actually, we could do the work with machine checks.
400 	   By passing this register update test, we pretty much
401 	   guarantee that cia_pci_tbi_try1 works.  If this test
402 	   fails, cia_pci_tbi_try2 might still work.  */
403 
404 	temp = *(vip)CIA_IOC_TB_TAGn(0);
405 	if (temp != tag0) {
406 		printk("pci: failed tb register update test "
407 		       "(tag0 %#x != %#x)\n", temp, tag0);
408 		goto failed;
409 	}
410 	temp = *(vip)CIA_IOC_TB_TAGn(1);
411 	if (temp != 0) {
412 		printk("pci: failed tb register update test "
413 		       "(tag1 %#x != 0)\n", temp);
414 		goto failed;
415 	}
416 	temp = *(vip)CIA_IOC_TBn_PAGEm(0,0);
417 	if (temp != pte0) {
418 		printk("pci: failed tb register update test "
419 		       "(pte0 %#x != %#x)\n", temp, pte0);
420 		goto failed;
421 	}
422 	printk("pci: passed tb register update test\n");
423 
424 	/* Second, verify we can actually do I/O through this entry.  */
425 
426 	data0 = 0xdeadbeef;
427 	page[0] = data0;
428 	mcheck_expected(0) = 1;
429 	mcheck_taken(0) = 0;
430 	mb();
431 	temp = cia_readl(bus_addr);
432 	mb();
433 	mcheck_expected(0) = 0;
434 	mb();
435 	if (mcheck_taken(0)) {
436 		printk("pci: failed sg loopback i/o read test (mcheck)\n");
437 		goto failed;
438 	}
439 	if (temp != data0) {
440 		printk("pci: failed sg loopback i/o read test "
441 		       "(%#x != %#x)\n", temp, data0);
442 		goto failed;
443 	}
444 	printk("pci: passed sg loopback i/o read test\n");
445 
446 	/* Third, try to invalidate the TLB.  */
447 
448 	if (! use_tbia_try2) {
449 		cia_pci_tbi(arena->hose, 0, -1);
450 		temp = *(vip)CIA_IOC_TB_TAGn(0);
451 		if (temp & 1) {
452 			use_tbia_try2 = 1;
453 			printk("pci: failed tbia test; workaround available\n");
454 		} else {
455 			printk("pci: passed tbia test\n");
456 		}
457 	}
458 
459 	/* Fourth, verify the TLB snoops the EV5's caches when
460 	   doing a tlb fill.  */
461 
462 	data0 = 0x5adda15e;
463 	page[0] = data0;
464 	arena->ptes[4] = pte0;
465 	mcheck_expected(0) = 1;
466 	mcheck_taken(0) = 0;
467 	mb();
468 	temp = cia_readl(bus_addr + 4*PAGE_SIZE);
469 	mb();
470 	mcheck_expected(0) = 0;
471 	mb();
472 	if (mcheck_taken(0)) {
473 		printk("pci: failed pte write cache snoop test (mcheck)\n");
474 		goto failed;
475 	}
476 	if (temp != data0) {
477 		printk("pci: failed pte write cache snoop test "
478 		       "(%#x != %#x)\n", temp, data0);
479 		goto failed;
480 	}
481 	printk("pci: passed pte write cache snoop test\n");
482 
483 	/* Fifth, verify that a previously invalid PTE entry gets
484 	   filled from the page table.  */
485 
486 	data0 = 0xabcdef12;
487 	page[0] = data0;
488 	arena->ptes[5] = pte0;
489 	mcheck_expected(0) = 1;
490 	mcheck_taken(0) = 0;
491 	mb();
492 	temp = cia_readl(bus_addr + 5*PAGE_SIZE);
493 	mb();
494 	mcheck_expected(0) = 0;
495 	mb();
496 	if (mcheck_taken(0)) {
497 		printk("pci: failed valid tag invalid pte reload test "
498 		       "(mcheck; workaround available)\n");
499 		/* Work around this bug by aligning new allocations
500 		   on 4 page boundaries.  */
501 		arena->align_entry = 4;
502 	} else if (temp != data0) {
503 		printk("pci: failed valid tag invalid pte reload test "
504 		       "(%#x != %#x)\n", temp, data0);
505 		goto failed;
506 	} else {
507 		printk("pci: passed valid tag invalid pte reload test\n");
508 	}
509 
510 	/* Sixth, verify machine checks are working.  Test invalid
511 	   pte under the same valid tag as we used above.  */
512 
513 	mcheck_expected(0) = 1;
514 	mcheck_taken(0) = 0;
515 	mb();
516 	temp = cia_readl(bus_addr + 6*PAGE_SIZE);
517 	mb();
518 	mcheck_expected(0) = 0;
519 	mb();
520 	printk("pci: %s pci machine check test\n",
521 	       mcheck_taken(0) ? "passed" : "failed");
522 
523 	/* Clean up after the tests.  */
524 	arena->ptes[4] = 0;
525 	arena->ptes[5] = 0;
526 
527 	if (use_tbia_try2) {
528 		alpha_mv.mv_pci_tbi = cia_pci_tbi_try2;
529 
530 		/* Tags 0-3 must be disabled if we use this workaround. */
531 		wmb();
532 		*(vip)CIA_IOC_TB_TAGn(0) = 2;
533 		*(vip)CIA_IOC_TB_TAGn(1) = 2;
534 		*(vip)CIA_IOC_TB_TAGn(2) = 2;
535 		*(vip)CIA_IOC_TB_TAGn(3) = 2;
536 
537 		printk("pci: tbia workaround enabled\n");
538 	}
539 	alpha_mv.mv_pci_tbi(arena->hose, 0, -1);
540 
541 exit:
542 	/* unmap the bus addr */
543 	cia_iounmap(bus_addr);
544 
545 	/* Restore normal PCI operation.  */
546 	mb();
547 	*(vip)CIA_IOC_CIA_CTRL = ctrl;
548 	mb();
549 	*(vip)CIA_IOC_CIA_CTRL;
550 	mb();
551 	return;
552 
553 failed:
554 	printk("pci: disabling sg translation window\n");
555 	*(vip)CIA_IOC_PCI_W0_BASE = 0;
556 	*(vip)CIA_IOC_PCI_W1_BASE = 0;
557 	pci_isa_hose->sg_isa = NULL;
558 	alpha_mv.mv_pci_tbi = NULL;
559 	goto exit;
560 }
561 
562 #if defined(ALPHA_RESTORE_SRM_SETUP)
563 /* Save CIA configuration data as the console had it set up.  */
564 struct
565 {
566     unsigned int hae_mem;
567     unsigned int hae_io;
568     unsigned int pci_dac_offset;
569     unsigned int err_mask;
570     unsigned int cia_ctrl;
571     unsigned int cia_cnfg;
572     struct {
573 	unsigned int w_base;
574 	unsigned int w_mask;
575 	unsigned int t_base;
576     } window[4];
577 } saved_config __attribute((common));
578 
579 void
cia_save_srm_settings(int is_pyxis)580 cia_save_srm_settings(int is_pyxis)
581 {
582 	int i;
583 
584 	/* Save some important registers. */
585 	saved_config.err_mask       = *(vip)CIA_IOC_ERR_MASK;
586 	saved_config.cia_ctrl       = *(vip)CIA_IOC_CIA_CTRL;
587 	saved_config.hae_mem        = *(vip)CIA_IOC_HAE_MEM;
588 	saved_config.hae_io         = *(vip)CIA_IOC_HAE_IO;
589 	saved_config.pci_dac_offset = *(vip)CIA_IOC_PCI_W_DAC;
590 
591 	if (is_pyxis)
592 	    saved_config.cia_cnfg   = *(vip)CIA_IOC_CIA_CNFG;
593 	else
594 	    saved_config.cia_cnfg   = 0;
595 
596 	/* Save DMA windows configuration. */
597 	for (i = 0; i < 4; i++) {
598 	    saved_config.window[i].w_base = *(vip)CIA_IOC_PCI_Wn_BASE(i);
599 	    saved_config.window[i].w_mask = *(vip)CIA_IOC_PCI_Wn_MASK(i);
600 	    saved_config.window[i].t_base = *(vip)CIA_IOC_PCI_Tn_BASE(i);
601 	}
602 	mb();
603 }
604 
605 void
cia_restore_srm_settings(void)606 cia_restore_srm_settings(void)
607 {
608 	int i;
609 
610 	for (i = 0; i < 4; i++) {
611 	    *(vip)CIA_IOC_PCI_Wn_BASE(i) = saved_config.window[i].w_base;
612 	    *(vip)CIA_IOC_PCI_Wn_MASK(i) = saved_config.window[i].w_mask;
613 	    *(vip)CIA_IOC_PCI_Tn_BASE(i) = saved_config.window[i].t_base;
614 	}
615 
616 	*(vip)CIA_IOC_HAE_MEM   = saved_config.hae_mem;
617 	*(vip)CIA_IOC_HAE_IO    = saved_config.hae_io;
618 	*(vip)CIA_IOC_PCI_W_DAC = saved_config.pci_dac_offset;
619 	*(vip)CIA_IOC_ERR_MASK  = saved_config.err_mask;
620 	*(vip)CIA_IOC_CIA_CTRL  = saved_config.cia_ctrl;
621 
622 	if (saved_config.cia_cnfg) /* Must be pyxis. */
623 	    *(vip)CIA_IOC_CIA_CNFG  = saved_config.cia_cnfg;
624 
625 	mb();
626 }
627 #else /* ALPHA_RESTORE_SRM_SETUP */
628 #define cia_save_srm_settings(p)	do {} while (0)
629 #define cia_restore_srm_settings()	do {} while (0)
630 #endif /* ALPHA_RESTORE_SRM_SETUP */
631 
632 
633 static void __init
do_init_arch(int is_pyxis)634 do_init_arch(int is_pyxis)
635 {
636 	struct pci_controller *hose;
637 	int temp, cia_rev, tbia_window;
638 
639 	cia_rev = *(vip)CIA_IOC_CIA_REV & CIA_REV_MASK;
640 	printk("pci: cia revision %d%s\n",
641 	       cia_rev, is_pyxis ? " (pyxis)" : "");
642 
643 	if (alpha_using_srm)
644 		cia_save_srm_settings(is_pyxis);
645 
646 	/* Set up error reporting.  */
647 	temp = *(vip)CIA_IOC_ERR_MASK;
648 	temp &= ~(CIA_ERR_CPU_PE | CIA_ERR_MEM_NEM | CIA_ERR_PA_PTE_INV
649 		  | CIA_ERR_RCVD_MAS_ABT | CIA_ERR_RCVD_TAR_ABT);
650 	*(vip)CIA_IOC_ERR_MASK = temp;
651 
652 	/* Clear all currently pending errors.  */
653 	temp = *(vip)CIA_IOC_CIA_ERR;
654 	*(vip)CIA_IOC_CIA_ERR = temp;
655 
656 	/* Turn on mchecks.  */
657 	temp = *(vip)CIA_IOC_CIA_CTRL;
658 	temp |= CIA_CTRL_FILL_ERR_EN | CIA_CTRL_MCHK_ERR_EN;
659 	*(vip)CIA_IOC_CIA_CTRL = temp;
660 
661 	/* Clear the CFG register, which gets used for PCI config space
662 	   accesses.  That is the way we want to use it, and we do not
663 	   want to depend on what ARC or SRM might have left behind.  */
664 	*(vip)CIA_IOC_CFG = 0;
665 
666 	/* Zero the HAEs.  */
667 	*(vip)CIA_IOC_HAE_MEM = 0;
668 	*(vip)CIA_IOC_HAE_IO = 0;
669 
670 	/* For PYXIS, we always use BWX bus and i/o accesses.  To that end,
671 	   make sure they're enabled on the controller.  At the same time,
672 	   enable the monster window.  */
673 	if (is_pyxis) {
674 		temp = *(vip)CIA_IOC_CIA_CNFG;
675 		temp |= CIA_CNFG_IOA_BWEN | CIA_CNFG_PCI_MWEN;
676 		*(vip)CIA_IOC_CIA_CNFG = temp;
677 	}
678 
679 	/* Synchronize with all previous changes.  */
680 	mb();
681 	*(vip)CIA_IOC_CIA_REV;
682 
683 	/*
684 	 * Create our single hose.
685 	 */
686 
687 	pci_isa_hose = hose = alloc_pci_controller();
688 	hose->io_space = &ioport_resource;
689 	hose->mem_space = &iomem_resource;
690 	hose->index = 0;
691 
692 	if (! is_pyxis) {
693 		struct resource *hae_mem = alloc_resource();
694 		hose->mem_space = hae_mem;
695 
696 		hae_mem->start = 0;
697 		hae_mem->end = CIA_MEM_R1_MASK;
698 		hae_mem->name = pci_hae0_name;
699 		hae_mem->flags = IORESOURCE_MEM;
700 
701 		if (request_resource(&iomem_resource, hae_mem) < 0)
702 			printk(KERN_ERR "Failed to request HAE_MEM\n");
703 
704 		hose->sparse_mem_base = CIA_SPARSE_MEM - IDENT_ADDR;
705 		hose->dense_mem_base = CIA_DENSE_MEM - IDENT_ADDR;
706 		hose->sparse_io_base = CIA_IO - IDENT_ADDR;
707 		hose->dense_io_base = 0;
708 	} else {
709 		hose->sparse_mem_base = 0;
710 		hose->dense_mem_base = CIA_BW_MEM - IDENT_ADDR;
711 		hose->sparse_io_base = 0;
712 		hose->dense_io_base = CIA_BW_IO - IDENT_ADDR;
713 	}
714 
715 	/*
716 	 * Set up the PCI to main memory translation windows.
717 	 *
718 	 * Window 0 is S/G 8MB at 8MB (for isa)
719 	 * Window 1 is S/G 1MB at 768MB (for tbia) (unused for CIA rev 1)
720 	 * Window 2 is direct access 2GB at 2GB
721 	 * Window 3 is DAC access 4GB at 8GB (or S/G for tbia if CIA rev 1)
722 	 *
723 	 * ??? NetBSD hints that page tables must be aligned to 32K,
724 	 * possibly due to a hardware bug.  This is over-aligned
725 	 * from the 8K alignment one would expect for an 8MB window.
726 	 * No description of what revisions affected.
727 	 */
728 
729 	hose->sg_pci = NULL;
730 	hose->sg_isa = iommu_arena_new(hose, 0x00800000, 0x00800000, 32768);
731 
732 	__direct_map_base = 0x80000000;
733 	__direct_map_size = 0x80000000;
734 
735 	*(vip)CIA_IOC_PCI_W0_BASE = hose->sg_isa->dma_base | 3;
736 	*(vip)CIA_IOC_PCI_W0_MASK = (hose->sg_isa->size - 1) & 0xfff00000;
737 	*(vip)CIA_IOC_PCI_T0_BASE = virt_to_phys(hose->sg_isa->ptes) >> 2;
738 
739 	*(vip)CIA_IOC_PCI_W2_BASE = __direct_map_base | 1;
740 	*(vip)CIA_IOC_PCI_W2_MASK = (__direct_map_size - 1) & 0xfff00000;
741 	*(vip)CIA_IOC_PCI_T2_BASE = 0 >> 2;
742 
743 	/* On PYXIS we have the monster window, selected by bit 40, so
744 	   there is no need for window3 to be enabled.
745 
746 	   On CIA, we don't have true arbitrary addressing -- bits <39:32>
747 	   are compared against W_DAC.  We can, however, directly map 4GB,
748 	   which is better than before.  However, due to assumptions made
749 	   elsewhere, we should not claim that we support DAC unless that
750 	   4GB covers all of physical memory.
751 
752 	   On CIA rev 1, apparently W1 and W2 can't be used for SG.
753 	   At least, there are reports that it doesn't work for Alcor.
754 	   In that case, we have no choice but to use W3 for the TBIA
755 	   workaround, which means we can't use DAC at all. */
756 
757 	tbia_window = 1;
758 	if (is_pyxis) {
759 		*(vip)CIA_IOC_PCI_W3_BASE = 0;
760 	} else if (cia_rev == 1) {
761 		*(vip)CIA_IOC_PCI_W1_BASE = 0;
762 		tbia_window = 3;
763 	} else if (max_low_pfn > (0x100000000UL >> PAGE_SHIFT)) {
764 		*(vip)CIA_IOC_PCI_W3_BASE = 0;
765 	} else {
766 		*(vip)CIA_IOC_PCI_W3_BASE = 0x00000000 | 1 | 8;
767 		*(vip)CIA_IOC_PCI_W3_MASK = 0xfff00000;
768 		*(vip)CIA_IOC_PCI_T3_BASE = 0 >> 2;
769 
770 		alpha_mv.pci_dac_offset = 0x200000000UL;
771 		*(vip)CIA_IOC_PCI_W_DAC = alpha_mv.pci_dac_offset >> 32;
772 	}
773 
774 	/* Prepare workaround for apparently broken tbia. */
775 	cia_prepare_tbia_workaround(tbia_window);
776 }
777 
778 void __init
cia_init_arch(void)779 cia_init_arch(void)
780 {
781 	do_init_arch(0);
782 }
783 
784 void __init
pyxis_init_arch(void)785 pyxis_init_arch(void)
786 {
787 	/* On pyxis machines we can precisely calculate the
788 	   CPU clock frequency using pyxis real time counter.
789 	   It's especially useful for SX164 with broken RTC.
790 
791 	   Both CPU and chipset are driven by the single 16.666M
792 	   or 16.667M crystal oscillator. PYXIS_RT_COUNT clock is
793 	   66.66 MHz. -ink */
794 
795 	unsigned int cc0, cc1;
796 	unsigned long pyxis_cc;
797 
798 	__asm__ __volatile__ ("rpcc %0" : "=r"(cc0));
799 	pyxis_cc = *(vulp)PYXIS_RT_COUNT;
800 	do { } while(*(vulp)PYXIS_RT_COUNT - pyxis_cc < 4096);
801 	__asm__ __volatile__ ("rpcc %0" : "=r"(cc1));
802 	cc1 -= cc0;
803 	hwrpb->cycle_freq = ((cc1 >> 11) * 100000000UL) / 3;
804 	hwrpb_update_checksum(hwrpb);
805 
806 	do_init_arch(1);
807 }
808 
809 void
cia_kill_arch(int mode)810 cia_kill_arch(int mode)
811 {
812 	if (alpha_using_srm)
813 		cia_restore_srm_settings();
814 }
815 
816 void __init
cia_init_pci(void)817 cia_init_pci(void)
818 {
819 	/* Must delay this from init_arch, as we need machine checks.  */
820 	verify_tb_operation();
821 	common_init_pci();
822 }
823 
824 static inline void
cia_pci_clr_err(void)825 cia_pci_clr_err(void)
826 {
827 	int jd;
828 
829 	jd = *(vip)CIA_IOC_CIA_ERR;
830 	*(vip)CIA_IOC_CIA_ERR = jd;
831 	mb();
832 	*(vip)CIA_IOC_CIA_ERR;		/* re-read to force write.  */
833 }
834 
835 #ifdef CONFIG_VERBOSE_MCHECK
836 static void
cia_decode_pci_error(struct el_CIA_sysdata_mcheck * cia,const char * msg)837 cia_decode_pci_error(struct el_CIA_sysdata_mcheck *cia, const char *msg)
838 {
839 	static const char * const pci_cmd_desc[16] = {
840 		"Interrupt Acknowledge", "Special Cycle", "I/O Read",
841 		"I/O Write", "Reserved 0x4", "Reserved 0x5", "Memory Read",
842 		"Memory Write", "Reserved 0x8", "Reserved 0x9",
843 		"Configuration Read", "Configuration Write",
844 		"Memory Read Multiple", "Dual Address Cycle",
845 		"Memory Read Line", "Memory Write and Invalidate"
846 	};
847 
848 	if (cia->cia_err & (CIA_ERR_COR_ERR
849 			    | CIA_ERR_UN_COR_ERR
850 			    | CIA_ERR_MEM_NEM
851 			    | CIA_ERR_PA_PTE_INV)) {
852 		static const char * const window_desc[6] = {
853 			"No window active", "Window 0 hit", "Window 1 hit",
854 			"Window 2 hit", "Window 3 hit", "Monster window hit"
855 		};
856 
857 		const char *window;
858 		const char *cmd;
859 		unsigned long addr, tmp;
860 		int lock, dac;
861 
862 		cmd = pci_cmd_desc[cia->pci_err0 & 0x7];
863 		lock = (cia->pci_err0 >> 4) & 1;
864 		dac = (cia->pci_err0 >> 5) & 1;
865 
866 		tmp = (cia->pci_err0 >> 8) & 0x1F;
867 		tmp = ffs(tmp);
868 		window = window_desc[tmp];
869 
870 		addr = cia->pci_err1;
871 		if (dac) {
872 			tmp = *(vip)CIA_IOC_PCI_W_DAC & 0xFFUL;
873 			addr |= tmp << 32;
874 		}
875 
876 		printk(KERN_CRIT "CIA machine check: %s\n", msg);
877 		printk(KERN_CRIT "  DMA command: %s\n", cmd);
878 		printk(KERN_CRIT "  PCI address: %#010lx\n", addr);
879 		printk(KERN_CRIT "  %s, Lock: %d, DAC: %d\n",
880 		       window, lock, dac);
881 	} else if (cia->cia_err & (CIA_ERR_PERR
882 				   | CIA_ERR_PCI_ADDR_PE
883 				   | CIA_ERR_RCVD_MAS_ABT
884 				   | CIA_ERR_RCVD_TAR_ABT
885 				   | CIA_ERR_IOA_TIMEOUT)) {
886 		static const char * const master_st_desc[16] = {
887 			"Idle", "Drive bus", "Address step cycle",
888 			"Address cycle", "Data cycle", "Last read data cycle",
889 			"Last write data cycle", "Read stop cycle",
890 			"Write stop cycle", "Read turnaround cycle",
891 			"Write turnaround cycle", "Reserved 0xB",
892 			"Reserved 0xC", "Reserved 0xD", "Reserved 0xE",
893 			"Unknown state"
894 		};
895 		static const char * const target_st_desc[16] = {
896 			"Idle", "Busy", "Read data cycle", "Write data cycle",
897 			"Read stop cycle", "Write stop cycle",
898 			"Read turnaround cycle", "Write turnaround cycle",
899 			"Read wait cycle", "Write wait cycle",
900 			"Reserved 0xA", "Reserved 0xB", "Reserved 0xC",
901 			"Reserved 0xD", "Reserved 0xE", "Unknown state"
902 		};
903 
904 		const char *cmd;
905 		const char *master, *target;
906 		unsigned long addr, tmp;
907 		int dac;
908 
909 		master = master_st_desc[(cia->pci_err0 >> 16) & 0xF];
910 		target = target_st_desc[(cia->pci_err0 >> 20) & 0xF];
911 		cmd = pci_cmd_desc[(cia->pci_err0 >> 24) & 0xF];
912 		dac = (cia->pci_err0 >> 28) & 1;
913 
914 		addr = cia->pci_err2;
915 		if (dac) {
916 			tmp = *(volatile int *)CIA_IOC_PCI_W_DAC & 0xFFUL;
917 			addr |= tmp << 32;
918 		}
919 
920 		printk(KERN_CRIT "CIA machine check: %s\n", msg);
921 		printk(KERN_CRIT "  PCI command: %s\n", cmd);
922 		printk(KERN_CRIT "  Master state: %s, Target state: %s\n",
923 		       master, target);
924 		printk(KERN_CRIT "  PCI address: %#010lx, DAC: %d\n",
925 		       addr, dac);
926 	} else {
927 		printk(KERN_CRIT "CIA machine check: %s\n", msg);
928 		printk(KERN_CRIT "  Unknown PCI error\n");
929 		printk(KERN_CRIT "  PCI_ERR0 = %#08lx", cia->pci_err0);
930 		printk(KERN_CRIT "  PCI_ERR1 = %#08lx", cia->pci_err1);
931 		printk(KERN_CRIT "  PCI_ERR2 = %#08lx", cia->pci_err2);
932 	}
933 }
934 
935 static void
cia_decode_mem_error(struct el_CIA_sysdata_mcheck * cia,const char * msg)936 cia_decode_mem_error(struct el_CIA_sysdata_mcheck *cia, const char *msg)
937 {
938 	unsigned long mem_port_addr;
939 	unsigned long mem_port_mask;
940 	const char *mem_port_cmd;
941 	const char *seq_state;
942 	const char *set_select;
943 	unsigned long tmp;
944 
945 	/* If this is a DMA command, also decode the PCI bits.  */
946 	if ((cia->mem_err1 >> 20) & 1)
947 		cia_decode_pci_error(cia, msg);
948 	else
949 		printk(KERN_CRIT "CIA machine check: %s\n", msg);
950 
951 	mem_port_addr = cia->mem_err0 & 0xfffffff0;
952 	mem_port_addr |= (cia->mem_err1 & 0x83UL) << 32;
953 
954 	mem_port_mask = (cia->mem_err1 >> 12) & 0xF;
955 
956 	tmp = (cia->mem_err1 >> 8) & 0xF;
957 	tmp |= ((cia->mem_err1 >> 20) & 1) << 4;
958 	if ((tmp & 0x1E) == 0x06)
959 		mem_port_cmd = "WRITE BLOCK or WRITE BLOCK LOCK";
960 	else if ((tmp & 0x1C) == 0x08)
961 		mem_port_cmd = "READ MISS or READ MISS MODIFY";
962 	else if (tmp == 0x1C)
963 		mem_port_cmd = "BC VICTIM";
964 	else if ((tmp & 0x1E) == 0x0E)
965 		mem_port_cmd = "READ MISS MODIFY";
966 	else if ((tmp & 0x1C) == 0x18)
967 		mem_port_cmd = "DMA READ or DMA READ MODIFY";
968 	else if ((tmp & 0x1E) == 0x12)
969 		mem_port_cmd = "DMA WRITE";
970 	else
971 		mem_port_cmd = "Unknown";
972 
973 	tmp = (cia->mem_err1 >> 16) & 0xF;
974 	switch (tmp) {
975 	case 0x0:
976 		seq_state = "Idle";
977 		break;
978 	case 0x1:
979 		seq_state = "DMA READ or DMA WRITE";
980 		break;
981 	case 0x2: case 0x3:
982 		seq_state = "READ MISS (or READ MISS MODIFY) with victim";
983 		break;
984 	case 0x4: case 0x5: case 0x6:
985 		seq_state = "READ MISS (or READ MISS MODIFY) with no victim";
986 		break;
987 	case 0x8: case 0x9: case 0xB:
988 		seq_state = "Refresh";
989 		break;
990 	case 0xC:
991 		seq_state = "Idle, waiting for DMA pending read";
992 		break;
993 	case 0xE: case 0xF:
994 		seq_state = "Idle, ras precharge";
995 		break;
996 	default:
997 		seq_state = "Unknown";
998 		break;
999 	}
1000 
1001 	tmp = (cia->mem_err1 >> 24) & 0x1F;
1002 	switch (tmp) {
1003 	case 0x00: set_select = "Set 0 selected"; break;
1004 	case 0x01: set_select = "Set 1 selected"; break;
1005 	case 0x02: set_select = "Set 2 selected"; break;
1006 	case 0x03: set_select = "Set 3 selected"; break;
1007 	case 0x04: set_select = "Set 4 selected"; break;
1008 	case 0x05: set_select = "Set 5 selected"; break;
1009 	case 0x06: set_select = "Set 6 selected"; break;
1010 	case 0x07: set_select = "Set 7 selected"; break;
1011 	case 0x08: set_select = "Set 8 selected"; break;
1012 	case 0x09: set_select = "Set 9 selected"; break;
1013 	case 0x0A: set_select = "Set A selected"; break;
1014 	case 0x0B: set_select = "Set B selected"; break;
1015 	case 0x0C: set_select = "Set C selected"; break;
1016 	case 0x0D: set_select = "Set D selected"; break;
1017 	case 0x0E: set_select = "Set E selected"; break;
1018 	case 0x0F: set_select = "Set F selected"; break;
1019 	case 0x10: set_select = "No set selected"; break;
1020 	case 0x1F: set_select = "Refresh cycle"; break;
1021 	default:   set_select = "Unknown"; break;
1022 	}
1023 
1024 	printk(KERN_CRIT "  Memory port command: %s\n", mem_port_cmd);
1025 	printk(KERN_CRIT "  Memory port address: %#010lx, mask: %#lx\n",
1026 	       mem_port_addr, mem_port_mask);
1027 	printk(KERN_CRIT "  Memory sequencer state: %s\n", seq_state);
1028 	printk(KERN_CRIT "  Memory set: %s\n", set_select);
1029 }
1030 
1031 static void
cia_decode_ecc_error(struct el_CIA_sysdata_mcheck * cia,const char * msg)1032 cia_decode_ecc_error(struct el_CIA_sysdata_mcheck *cia, const char *msg)
1033 {
1034 	long syn;
1035 	long i;
1036 	const char *fmt;
1037 
1038 	cia_decode_mem_error(cia, msg);
1039 
1040 	syn = cia->cia_syn & 0xff;
1041 	if (syn == (syn & -syn)) {
1042 		fmt = KERN_CRIT "  ECC syndrome %#x -- check bit %d\n";
1043 		i = ffs(syn) - 1;
1044 	} else {
1045 		static unsigned char const data_bit[64] = {
1046 			0xCE, 0xCB, 0xD3, 0xD5,
1047 			0xD6, 0xD9, 0xDA, 0xDC,
1048 			0x23, 0x25, 0x26, 0x29,
1049 			0x2A, 0x2C, 0x31, 0x34,
1050 			0x0E, 0x0B, 0x13, 0x15,
1051 			0x16, 0x19, 0x1A, 0x1C,
1052 			0xE3, 0xE5, 0xE6, 0xE9,
1053 			0xEA, 0xEC, 0xF1, 0xF4,
1054 			0x4F, 0x4A, 0x52, 0x54,
1055 			0x57, 0x58, 0x5B, 0x5D,
1056 			0xA2, 0xA4, 0xA7, 0xA8,
1057 			0xAB, 0xAD, 0xB0, 0xB5,
1058 			0x8F, 0x8A, 0x92, 0x94,
1059 			0x97, 0x98, 0x9B, 0x9D,
1060 			0x62, 0x64, 0x67, 0x68,
1061 			0x6B, 0x6D, 0x70, 0x75
1062 		};
1063 
1064 		for (i = 0; i < 64; ++i)
1065 			if (data_bit[i] == syn)
1066 				break;
1067 
1068 		if (i < 64)
1069 			fmt = KERN_CRIT "  ECC syndrome %#x -- data bit %d\n";
1070 		else
1071 			fmt = KERN_CRIT "  ECC syndrome %#x -- unknown bit\n";
1072 	}
1073 
1074 	printk (fmt, syn, i);
1075 }
1076 
1077 static void
cia_decode_parity_error(struct el_CIA_sysdata_mcheck * cia)1078 cia_decode_parity_error(struct el_CIA_sysdata_mcheck *cia)
1079 {
1080 	static const char * const cmd_desc[16] = {
1081 		"NOP", "LOCK", "FETCH", "FETCH_M", "MEMORY BARRIER",
1082 		"SET DIRTY", "WRITE BLOCK", "WRITE BLOCK LOCK",
1083 		"READ MISS0", "READ MISS1", "READ MISS MOD0",
1084 		"READ MISS MOD1", "BCACHE VICTIM", "Spare",
1085 		"READ MISS MOD STC0", "READ MISS MOD STC1"
1086 	};
1087 
1088 	unsigned long addr;
1089 	unsigned long mask;
1090 	const char *cmd;
1091 	int par;
1092 
1093 	addr = cia->cpu_err0 & 0xfffffff0;
1094 	addr |= (cia->cpu_err1 & 0x83UL) << 32;
1095 	cmd = cmd_desc[(cia->cpu_err1 >> 8) & 0xF];
1096 	mask = (cia->cpu_err1 >> 12) & 0xF;
1097 	par = (cia->cpu_err1 >> 21) & 1;
1098 
1099 	printk(KERN_CRIT "CIA machine check: System bus parity error\n");
1100 	printk(KERN_CRIT "  Command: %s, Parity bit: %d\n", cmd, par);
1101 	printk(KERN_CRIT "  Address: %#010lx, Mask: %#lx\n", addr, mask);
1102 }
1103 #endif /* CONFIG_VERBOSE_MCHECK */
1104 
1105 
1106 static int
cia_decode_mchk(unsigned long la_ptr)1107 cia_decode_mchk(unsigned long la_ptr)
1108 {
1109 	struct el_common *com;
1110 	struct el_CIA_sysdata_mcheck *cia;
1111 
1112 	com = (void *)la_ptr;
1113 	cia = (void *)(la_ptr + com->sys_offset);
1114 
1115 	if ((cia->cia_err & CIA_ERR_VALID) == 0)
1116 		return 0;
1117 
1118 #ifdef CONFIG_VERBOSE_MCHECK
1119 	if (!alpha_verbose_mcheck)
1120 		return 1;
1121 
1122 	switch (ffs(cia->cia_err & 0xfff) - 1) {
1123 	case 0: /* CIA_ERR_COR_ERR */
1124 		cia_decode_ecc_error(cia, "Corrected ECC error");
1125 		break;
1126 	case 1: /* CIA_ERR_UN_COR_ERR */
1127 		cia_decode_ecc_error(cia, "Uncorrected ECC error");
1128 		break;
1129 	case 2: /* CIA_ERR_CPU_PE */
1130 		cia_decode_parity_error(cia);
1131 		break;
1132 	case 3: /* CIA_ERR_MEM_NEM */
1133 		cia_decode_mem_error(cia, "Access to nonexistent memory");
1134 		break;
1135 	case 4: /* CIA_ERR_PCI_SERR */
1136 		cia_decode_pci_error(cia, "PCI bus system error");
1137 		break;
1138 	case 5: /* CIA_ERR_PERR */
1139 		cia_decode_pci_error(cia, "PCI data parity error");
1140 		break;
1141 	case 6: /* CIA_ERR_PCI_ADDR_PE */
1142 		cia_decode_pci_error(cia, "PCI address parity error");
1143 		break;
1144 	case 7: /* CIA_ERR_RCVD_MAS_ABT */
1145 		cia_decode_pci_error(cia, "PCI master abort");
1146 		break;
1147 	case 8: /* CIA_ERR_RCVD_TAR_ABT */
1148 		cia_decode_pci_error(cia, "PCI target abort");
1149 		break;
1150 	case 9: /* CIA_ERR_PA_PTE_INV */
1151 		cia_decode_pci_error(cia, "PCI invalid PTE");
1152 		break;
1153 	case 10: /* CIA_ERR_FROM_WRT_ERR */
1154 		cia_decode_mem_error(cia, "Write to flash ROM attempted");
1155 		break;
1156 	case 11: /* CIA_ERR_IOA_TIMEOUT */
1157 		cia_decode_pci_error(cia, "I/O timeout");
1158 		break;
1159 	}
1160 
1161 	if (cia->cia_err & CIA_ERR_LOST_CORR_ERR)
1162 		printk(KERN_CRIT "CIA lost machine check: "
1163 		       "Correctable ECC error\n");
1164 	if (cia->cia_err & CIA_ERR_LOST_UN_CORR_ERR)
1165 		printk(KERN_CRIT "CIA lost machine check: "
1166 		       "Uncorrectable ECC error\n");
1167 	if (cia->cia_err & CIA_ERR_LOST_CPU_PE)
1168 		printk(KERN_CRIT "CIA lost machine check: "
1169 		       "System bus parity error\n");
1170 	if (cia->cia_err & CIA_ERR_LOST_MEM_NEM)
1171 		printk(KERN_CRIT "CIA lost machine check: "
1172 		       "Access to nonexistent memory\n");
1173 	if (cia->cia_err & CIA_ERR_LOST_PERR)
1174 		printk(KERN_CRIT "CIA lost machine check: "
1175 		       "PCI data parity error\n");
1176 	if (cia->cia_err & CIA_ERR_LOST_PCI_ADDR_PE)
1177 		printk(KERN_CRIT "CIA lost machine check: "
1178 		       "PCI address parity error\n");
1179 	if (cia->cia_err & CIA_ERR_LOST_RCVD_MAS_ABT)
1180 		printk(KERN_CRIT "CIA lost machine check: "
1181 		       "PCI master abort\n");
1182 	if (cia->cia_err & CIA_ERR_LOST_RCVD_TAR_ABT)
1183 		printk(KERN_CRIT "CIA lost machine check: "
1184 		       "PCI target abort\n");
1185 	if (cia->cia_err & CIA_ERR_LOST_PA_PTE_INV)
1186 		printk(KERN_CRIT "CIA lost machine check: "
1187 		       "PCI invalid PTE\n");
1188 	if (cia->cia_err & CIA_ERR_LOST_FROM_WRT_ERR)
1189 		printk(KERN_CRIT "CIA lost machine check: "
1190 		       "Write to flash ROM attempted\n");
1191 	if (cia->cia_err & CIA_ERR_LOST_IOA_TIMEOUT)
1192 		printk(KERN_CRIT "CIA lost machine check: "
1193 		       "I/O timeout\n");
1194 #endif /* CONFIG_VERBOSE_MCHECK */
1195 
1196 	return 1;
1197 }
1198 
1199 void
cia_machine_check(unsigned long vector,unsigned long la_ptr)1200 cia_machine_check(unsigned long vector, unsigned long la_ptr)
1201 {
1202 	int expected;
1203 
1204 	/* Clear the error before any reporting.  */
1205 	mb();
1206 	mb();  /* magic */
1207 	draina();
1208 	cia_pci_clr_err();
1209 	wrmces(rdmces());	/* reset machine check pending flag.  */
1210 	mb();
1211 
1212 	expected = mcheck_expected(0);
1213 	if (!expected && vector == 0x660)
1214 		expected = cia_decode_mchk(la_ptr);
1215 	process_mcheck_info(vector, la_ptr, "CIA", expected);
1216 }
1217