1/* 2 * Copyright 2014 Carlo Caione <carlo@caione.org> 3 * 4 * This file is dual-licensed: you can use it either under the terms 5 * of the GPL or the X11 license, at your option. Note that this dual 6 * licensing only applies to this file, and not this project as a 7 * whole. 8 * 9 * a) This library is free software; you can redistribute it and/or 10 * modify it under the terms of the GNU General Public License as 11 * published by the Free Software Foundation; either version 2 of the 12 * License, or (at your option) any later version. 13 * 14 * This library is distributed in the hope that it will be useful, 15 * but WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 * GNU General Public License for more details. 18 * 19 * You should have received a copy of the GNU General Public 20 * License along with this library; if not, write to the Free 21 * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, 22 * MA 02110-1301 USA 23 * 24 * Or, alternatively, 25 * 26 * b) Permission is hereby granted, free of charge, to any person 27 * obtaining a copy of this software and associated documentation 28 * files (the "Software"), to deal in the Software without 29 * restriction, including without limitation the rights to use, 30 * copy, modify, merge, publish, distribute, sublicense, and/or 31 * sell copies of the Software, and to permit persons to whom the 32 * Software is furnished to do so, subject to the following 33 * conditions: 34 * 35 * The above copyright notice and this permission notice shall be 36 * included in all copies or substantial portions of the Software. 37 * 38 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 39 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES 40 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 41 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT 42 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, 43 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 44 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR 45 * OTHER DEALINGS IN THE SOFTWARE. 46 */ 47 48#include <dt-bindings/interrupt-controller/irq.h> 49#include <dt-bindings/interrupt-controller/arm-gic.h> 50/include/ "skeleton.dtsi" 51 52/ { 53 interrupt-parent = <&gic>; 54 55 L2: l2-cache-controller@c4200000 { 56 compatible = "arm,pl310-cache"; 57 reg = <0xc4200000 0x1000>; 58 cache-unified; 59 cache-level = <2>; 60 }; 61 62 gic: interrupt-controller@c4301000 { 63 compatible = "arm,cortex-a9-gic"; 64 reg = <0xc4301000 0x1000>, 65 <0xc4300100 0x0100>; 66 interrupt-controller; 67 #interrupt-cells = <3>; 68 }; 69 70 soc { 71 compatible = "simple-bus"; 72 #address-cells = <1>; 73 #size-cells = <1>; 74 ranges; 75 76 cbus: cbus@c1100000 { 77 compatible = "simple-bus"; 78 reg = <0xc1100000 0x200000>; 79 #address-cells = <1>; 80 #size-cells = <1>; 81 ranges = <0x0 0xc1100000 0x200000>; 82 83 assist: assist@7c00 { 84 compatible = "amlogic,meson-mx-assist", "syscon"; 85 reg = <0x7c00 0x200>; 86 }; 87 88 hwrng: rng@8100 { 89 compatible = "amlogic,meson-rng"; 90 reg = <0x8100 0x8>; 91 }; 92 93 uart_A: serial@84c0 { 94 compatible = "amlogic,meson6-uart", "amlogic,meson-uart"; 95 reg = <0x84c0 0x18>; 96 interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>; 97 status = "disabled"; 98 }; 99 100 uart_B: serial@84dc { 101 compatible = "amlogic,meson6-uart", "amlogic,meson-uart"; 102 reg = <0x84dc 0x18>; 103 interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>; 104 status = "disabled"; 105 }; 106 107 i2c_A: i2c@8500 { 108 compatible = "amlogic,meson6-i2c"; 109 reg = <0x8500 0x20>; 110 interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>; 111 #address-cells = <1>; 112 #size-cells = <0>; 113 status = "disabled"; 114 }; 115 116 pwm_ab: pwm@8550 { 117 compatible = "amlogic,meson-pwm"; 118 reg = <0x8550 0x10>; 119 #pwm-cells = <3>; 120 status = "disabled"; 121 }; 122 123 pwm_cd: pwm@8650 { 124 compatible = "amlogic,meson-pwm"; 125 reg = <0x8650 0x10>; 126 #pwm-cells = <3>; 127 status = "disabled"; 128 }; 129 130 saradc: adc@8680 { 131 compatible = "amlogic,meson-saradc"; 132 reg = <0x8680 0x34>; 133 #io-channel-cells = <1>; 134 interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>; 135 status = "disabled"; 136 }; 137 138 uart_C: serial@8700 { 139 compatible = "amlogic,meson6-uart", "amlogic,meson-uart"; 140 reg = <0x8700 0x18>; 141 interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>; 142 status = "disabled"; 143 }; 144 145 i2c_B: i2c@87c0 { 146 compatible = "amlogic,meson6-i2c"; 147 reg = <0x87c0 0x20>; 148 interrupts = <GIC_SPI 128 IRQ_TYPE_EDGE_RISING>; 149 #address-cells = <1>; 150 #size-cells = <0>; 151 status = "disabled"; 152 }; 153 154 usb0_phy: phy@8800 { 155 compatible = "amlogic,meson-mx-usb2-phy"; 156 #phy-cells = <0>; 157 reg = <0x8800 0x20>; 158 status = "disabled"; 159 }; 160 161 usb1_phy: phy@8820 { 162 compatible = "amlogic,meson-mx-usb2-phy"; 163 #phy-cells = <0>; 164 reg = <0x8820 0x20>; 165 status = "disabled"; 166 }; 167 168 sdio: mmc@8c20 { 169 compatible = "amlogic,meson-mx-sdio"; 170 reg = <0x8c20 0x20>; 171 interrupts = <GIC_SPI 28 IRQ_TYPE_EDGE_RISING>; 172 #address-cells = <1>; 173 #size-cells = <0>; 174 status = "disabled"; 175 }; 176 177 spifc: spi@8c80 { 178 compatible = "amlogic,meson6-spifc"; 179 reg = <0x8c80 0x80>; 180 #address-cells = <1>; 181 #size-cells = <0>; 182 status = "disabled"; 183 }; 184 185 gpio_intc: interrupt-controller@9880 { 186 compatible = "amlogic,meson-gpio-intc"; 187 reg = <0x9880 0x10>; 188 interrupt-controller; 189 #interrupt-cells = <2>; 190 amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>; 191 status = "disabled"; 192 }; 193 194 wdt: watchdog@9900 { 195 compatible = "amlogic,meson6-wdt"; 196 reg = <0x9900 0x8>; 197 interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>; 198 }; 199 200 timer@9940 { 201 compatible = "amlogic,meson6-timer"; 202 reg = <0x9940 0x18>; 203 interrupts = <GIC_SPI 10 IRQ_TYPE_EDGE_RISING>; 204 }; 205 }; 206 207 aobus: aobus@c8100000 { 208 compatible = "simple-bus"; 209 reg = <0xc8100000 0x100000>; 210 #address-cells = <1>; 211 #size-cells = <1>; 212 ranges = <0x0 0xc8100000 0x100000>; 213 214 ir_receiver: ir-receiver@480 { 215 compatible= "amlogic,meson6-ir"; 216 reg = <0x480 0x20>; 217 interrupts = <GIC_SPI 15 IRQ_TYPE_EDGE_RISING>; 218 status = "disabled"; 219 }; 220 221 uart_AO: serial@4c0 { 222 compatible = "amlogic,meson6-uart", "amlogic,meson-ao-uart", "amlogic,meson-uart"; 223 reg = <0x4c0 0x18>; 224 interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>; 225 status = "disabled"; 226 }; 227 228 i2c_AO: i2c@500 { 229 compatible = "amlogic,meson6-i2c"; 230 reg = <0x500 0x20>; 231 interrupts = <GIC_SPI 92 IRQ_TYPE_EDGE_RISING>; 232 #address-cells = <1>; 233 #size-cells = <0>; 234 status = "disabled"; 235 }; 236 }; 237 238 usb0: usb@c9040000 { 239 compatible = "snps,dwc2"; 240 #address-cells = <1>; 241 #size-cells = <0>; 242 reg = <0xc9040000 0x40000>; 243 interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; 244 phys = <&usb0_phy>; 245 phy-names = "usb2-phy"; 246 dr_mode = "host"; 247 status = "disabled"; 248 }; 249 250 usb1: usb@c90c0000 { 251 compatible = "snps,dwc2"; 252 #address-cells = <1>; 253 #size-cells = <0>; 254 reg = <0xc90c0000 0x40000>; 255 interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; 256 phys = <&usb1_phy>; 257 phy-names = "usb2-phy"; 258 dr_mode = "host"; 259 status = "disabled"; 260 }; 261 262 ethmac: ethernet@c9410000 { 263 compatible = "amlogic,meson6-dwmac", "snps,dwmac"; 264 reg = <0xc9410000 0x10000 265 0xc1108108 0x4>; 266 interrupts = <GIC_SPI 8 IRQ_TYPE_EDGE_RISING>; 267 interrupt-names = "macirq"; 268 status = "disabled"; 269 }; 270 271 ahb_sram: sram@d9000000 { 272 compatible = "mmio-sram"; 273 reg = <0xd9000000 0x20000>; 274 #address-cells = <1>; 275 #size-cells = <1>; 276 ranges = <0 0xd9000000 0x20000>; 277 }; 278 279 bootrom: bootrom@d9040000 { 280 compatible = "amlogic,meson-mx-bootrom", "syscon"; 281 reg = <0xd9040000 0x10000>; 282 }; 283 284 secbus: secbus@da000000 { 285 compatible = "simple-bus"; 286 reg = <0xda000000 0x6000>; 287 #address-cells = <1>; 288 #size-cells = <1>; 289 ranges = <0x0 0xda000000 0x6000>; 290 291 efuse: nvmem@0 { 292 compatible = "amlogic,meson6-efuse"; 293 reg = <0x0 0x2000>; 294 #address-cells = <1>; 295 #size-cells = <1>; 296 }; 297 }; 298 }; 299}; /* end of / */ 300
