1// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2/*
3 * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
4 */
5
6#include <dt-bindings/gpio/gpio.h>
7#include <dt-bindings/input/input.h>
8#include <dt-bindings/interrupt-controller/irq.h>
9#include <dt-bindings/interrupt-controller/arm-gic.h>
10
11/ {
12	#address-cells = <1>;
13	#size-cells = <1>;
14	interrupt-parent = <&gic>;
15
16	aliases {
17		serial0 = &uart0;
18	};
19
20	chosen {
21		stdout-path = "serial0:115200n8";
22	};
23
24	cpus {
25		#address-cells = <1>;
26		#size-cells = <0>;
27
28		cpu@0 {
29			device_type = "cpu";
30			compatible = "arm,cortex-a7";
31			reg = <0x0>;
32		};
33	};
34
35	mpcore@18310000 {
36		compatible = "simple-bus";
37		ranges = <0x00000000 0x18310000 0x00008000>;
38		#address-cells = <1>;
39		#size-cells = <1>;
40
41		gic: interrupt-controller@1000 {
42			compatible = "arm,cortex-a7-gic";
43			#interrupt-cells = <3>;
44			#address-cells = <0>;
45			interrupt-controller;
46			reg = <0x1000 0x1000>,
47			      <0x2000 0x0100>;
48		};
49	};
50
51	timer {
52		compatible = "arm,armv7-timer";
53		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
54			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
55			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
56			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
57	};
58
59	clocks {
60		#address-cells = <1>;
61		#size-cells = <1>;
62		ranges;
63
64		alp: oscillator {
65			#clock-cells = <0>;
66			compatible = "fixed-clock";
67			clock-frequency = <40000000>;
68		};
69	};
70
71	axi@18000000 {
72		compatible = "brcm,bus-axi";
73		reg = <0x18000000 0x1000>;
74		ranges = <0x00000000 0x18000000 0x00100000>;
75		#address-cells = <1>;
76		#size-cells = <1>;
77
78		#interrupt-cells = <1>;
79		interrupt-map-mask = <0x000fffff 0xffff>;
80		interrupt-map =
81			/* ChipCommon */
82			<0x00000000 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
83
84			/* IEEE 802.11 0 */
85			<0x00001000 0 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
86
87			/* PCIe Controller 0 */
88			<0x00002000 0 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
89			<0x00002000 1 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
90			<0x00002000 2 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
91			<0x00002000 3 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
92			<0x00002000 4 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
93			<0x00002000 5 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
94
95			/* USB 2.0 Controller */
96			<0x00004000 0 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
97
98			/* Ethernet Controller 0 */
99			<0x00005000 0 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
100
101			/* IEEE 802.11 1 */
102			<0x0000a000 0 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
103
104			/* Ethernet Controller 1 */
105			<0x0000b000 0 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
106
107		chipcommon: chipcommon@0 {
108			compatible = "simple-bus";
109			reg = <0x00000000 0x1000>;
110			ranges;
111
112			#address-cells = <1>;
113			#size-cells = <1>;
114
115			gpio-controller;
116			#gpio-cells = <2>;
117
118			uart0: serial@300 {
119				compatible = "ns16550a";
120				reg = <0x0300 0x100>;
121				interrupt-parent = <&gic>;
122				interrupts = <GIC_PPI 16 IRQ_TYPE_LEVEL_HIGH>;
123				clocks = <&alp>;
124				status = "okay";
125			};
126		};
127
128		pcie0: pcie@2000 {
129			reg = <0x00002000 0x1000>;
130
131			#address-cells = <3>;
132			#size-cells = <2>;
133		};
134
135		usb2: usb2@4000 {
136			reg = <0x4000 0x1000>;
137			ranges;
138			#address-cells = <1>;
139			#size-cells = <1>;
140
141			ehci: usb@4000 {
142				compatible = "generic-ehci";
143				reg = <0x4000 0x1000>;
144				interrupt-parent = <&gic>;
145				interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
146
147				#address-cells = <1>;
148				#size-cells = <0>;
149
150				ehci_port1: port@1 {
151					reg = <1>;
152					#trigger-source-cells = <0>;
153				};
154
155				ehci_port2: port@2 {
156					reg = <2>;
157					#trigger-source-cells = <0>;
158				};
159			};
160
161			ohci: usb@d000 {
162				compatible = "generic-ohci";
163				reg = <0xd000 0x1000>;
164				interrupt-parent = <&gic>;
165				interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
166
167				#address-cells = <1>;
168				#size-cells = <0>;
169
170				ohci_port1: port@1 {
171					reg = <1>;
172					#trigger-source-cells = <0>;
173				};
174
175				ohci_port2: port@2 {
176					reg = <2>;
177					#trigger-source-cells = <0>;
178				};
179			};
180		};
181
182		gmac0: ethernet@5000 {
183			reg = <0x5000 0x1000>;
184			phy-mode = "internal";
185
186			fixed-link {
187				speed = <1000>;
188				full-duplex;
189			};
190
191			mdio {
192				#address-cells = <1>;
193				#size-cells = <0>;
194
195				switch: switch@1e {
196					compatible = "brcm,bcm53125";
197					reg = <0x1e>;
198
199					status = "disabled";
200
201					ports {
202						#address-cells = <1>;
203						#size-cells = <0>;
204
205						port@0 {
206							reg = <0>;
207						};
208
209						port@1 {
210							reg = <1>;
211						};
212
213						port@2 {
214							reg = <2>;
215						};
216
217						port@3 {
218							reg = <3>;
219						};
220
221						port@4 {
222							reg = <4>;
223						};
224
225						port@5 {
226							reg = <5>;
227							ethernet = <&gmac1>;
228
229							fixed-link {
230								speed = <1000>;
231								full-duplex;
232							};
233						};
234
235						port@8 {
236							reg = <8>;
237							ethernet = <&gmac0>;
238						};
239					};
240				};
241			};
242		};
243
244		gmac1: ethernet@b000 {
245			reg = <0xb000 0x1000>;
246			phy-mode = "internal";
247
248			fixed-link {
249				speed = <1000>;
250				full-duplex;
251			};
252		};
253
254		pmu@12000 {
255			compatible = "simple-mfd", "syscon";
256			reg = <0x00012000 0x00001000>;
257
258			ilp: ilp {
259				compatible = "brcm,bcm53573-ilp";
260				clocks = <&alp>;
261				#clock-cells = <0>;
262				clock-output-names = "ilp";
263			};
264		};
265	};
266};
267