1* Altera PCIe controller
2
3Required properties:
4- compatible :	should contain "altr,pcie-root-port-1.0"
5- reg:		a list of physical base address and length for TXS and CRA.
6- reg-names:	must include the following entries:
7		"Txs": TX slave port region
8		"Cra": Control register access region
9- interrupts:	specifies the interrupt source of the parent interrupt
10		controller.  The format of the interrupt specifier depends
11		on the parent interrupt controller.
12- device_type:	must be "pci"
13- #address-cells:	set to <3>
14- #size-cells:		set to <2>
15- #interrupt-cells:	set to <1>
16- ranges:	describes the translation of addresses for root ports and
17		standard PCI regions.
18- interrupt-map-mask and interrupt-map: standard PCI properties to define the
19		mapping of the PCIe interface to interrupt numbers.
20
21Optional properties:
22- msi-parent:	Link to the hardware entity that serves as the MSI controller
23		for this PCIe controller.
24- bus-range:	PCI bus numbers covered
25
26Example
27	pcie_0: pcie@c00000000 {
28		compatible = "altr,pcie-root-port-1.0";
29		reg = <0xc0000000 0x20000000>,
30			<0xff220000 0x00004000>;
31		reg-names = "Txs", "Cra";
32		interrupt-parent = <&hps_0_arm_gic_0>;
33		interrupts = <0 40 4>;
34		interrupt-controller;
35		#interrupt-cells = <1>;
36		bus-range = <0x0 0xFF>;
37		device_type = "pci";
38		msi-parent = <&msi_to_gic_gen_0>;
39		#address-cells = <3>;
40		#size-cells = <2>;
41		interrupt-map-mask = <0 0 0 7>;
42		interrupt-map = <0 0 0 1 &pcie_0 1>,
43			            <0 0 0 2 &pcie_0 2>,
44			            <0 0 0 3 &pcie_0 3>,
45			            <0 0 0 4 &pcie_0 4>;
46		ranges = <0x82000000 0x00000000 0x00000000 0xc0000000 0x00000000 0x10000000
47			  0x82000000 0x00000000 0x10000000 0xd0000000 0x00000000 0x10000000>;
48	};
49