1Cirrus Logic/Wolfson Microelectronics Arizona class audio SoCs
2
3These devices are audio SoCs with extensive digital capabilities and a range
4of analogue I/O.
5
6Required properties:
7
8  - compatible : One of the following chip-specific strings:
9        "cirrus,cs47l24"
10        "wlf,wm5102"
11        "wlf,wm5110"
12        "wlf,wm8280"
13        "wlf,wm8997"
14        "wlf,wm8998"
15        "wlf,wm1814"
16        "wlf,wm1831"
17
18  - reg : I2C slave address when connected using I2C, chip select number when
19    using SPI.
20
21  - interrupts : The interrupt line the /IRQ signal for the device is
22    connected to.
23  - interrupt-controller : Arizona class devices contain interrupt controllers
24    and may provide interrupt services to other devices.
25  - #interrupt-cells: the number of cells to describe an IRQ, this should be 2.
26    The first cell is the IRQ number.
27    The second cell is the flags, encoded as the trigger masks from
28    Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
29
30  - gpio-controller : Indicates this device is a GPIO controller.
31  - #gpio-cells : Must be 2. The first cell is the pin number and the
32    second cell is used to specify optional parameters, see ../gpio/gpio.txt
33    for details.
34
35  - AVDD-supply, DBVDD1-supply, CPVDD-supply : Power supplies for the device,
36    as covered in Documentation/devicetree/bindings/regulator/regulator.txt
37
38  - DBVDD2-supply, DBVDD3-supply : Additional databus power supplies (wm5102,
39    wm5110, wm8280, wm8998, wm1814)
40
41  - SPKVDDL-supply, SPKVDDR-supply : Speaker driver power supplies (wm5102,
42    wm5110, wm8280, wm8998, wm1814)
43
44  - SPKVDD-supply : Speaker driver power supply (wm8997)
45
46  - DCVDD-supply : Main power supply (cs47l24, wm1831)
47
48  - MICVDD-supply : Microphone power supply (cs47l24, wm1831)
49
50Optional properties:
51
52  - reset-gpios : GPIO specifier for the GPIO controlling /RESET
53
54  - clocks: Should reference the clocks supplied on MCLK1 and MCLK2
55  - clock-names: Should contains two strings:
56      "mclk1" for the clock supplied on MCLK1, recommended to be a high
57      quality audio reference clock
58      "mclk2" for the clock supplied on MCLK2, recommended to be an always on
59      32k clock
60
61  - wlf,gpio-defaults : A list of GPIO configuration register values. Defines
62    for the appropriate values can found in <dt-bindings/mfd/arizona.txt>. If
63    absent, no configuration of these registers is performed. If any entry has
64    a value that is out of range for a 16 bit register then the chip default
65    will be used. If present exactly five values must be specified.
66
67  - DCVDD-supply, MICVDD-supply : Power supplies, only need to be specified if
68    they are being externally supplied. As covered in
69    Documentation/devicetree/bindings/regulator/regulator.txt
70    (wm5102, wm5110, wm8280, wm8997, wm8998, wm1814)
71
72Deprecated properties:
73
74  - wlf,reset : GPIO specifier for the GPIO controlling /RESET
75
76Also see child specific device properties:
77  Regulator - ../regulator/arizona-regulator.txt
78  Extcon    - ../extcon/extcon-arizona.txt
79  Sound     - ../sound/arizona.txt
80
81Example:
82
83codec: wm5102@1a {
84	compatible = "wlf,wm5102";
85	reg = <0x1a>;
86	interrupts = <347>;
87	interrupt-controller;
88	#interrupt-cells = <2>;
89        interrupt-parent = <&gic>;
90
91	gpio-controller;
92	#gpio-cells = <2>;
93
94	wlf,gpio-defaults = <
95		ARIZONA_GP_FN_TXLRCLK
96		ARIZONA_GP_DEFAULT
97		ARIZONA_GP_DEFAULT
98		ARIZONA_GP_DEFAULT
99		ARIZONA_GP_DEFAULT
100	>;
101};
102