1* Aptina 1/3-Inch WVGA CMOS Digital Image Sensor
2
3The Aptina MT9V032 is a 1/3-inch CMOS active pixel digital image sensor with
4an active array size of 752H x 480V. It is programmable through a simple
5two-wire serial interface.
6
7Required Properties:
8
9- compatible: value should be either one among the following
10	(a) "aptina,mt9v022" for MT9V022 color sensor
11	(b) "aptina,mt9v022m" for MT9V022 monochrome sensor
12	(c) "aptina,mt9v024" for MT9V024 color sensor
13	(d) "aptina,mt9v024m" for MT9V024 monochrome sensor
14	(e) "aptina,mt9v032" for MT9V032 color sensor
15	(f) "aptina,mt9v032m" for MT9V032 monochrome sensor
16	(g) "aptina,mt9v034" for MT9V034 color sensor
17	(h) "aptina,mt9v034m" for MT9V034 monochrome sensor
18
19Optional Properties:
20
21- link-frequencies: List of allowed link frequencies in Hz. Each frequency is
22	expressed as a 64-bit big-endian integer.
23- reset-gpios: GPIO handle which is connected to the reset pin of the chip.
24- standby-gpios: GPIO handle which is connected to the standby pin of the chip.
25
26For further reading on port node refer to
27Documentation/devicetree/bindings/media/video-interfaces.txt.
28
29Example:
30
31	mt9v032@5c {
32		compatible = "aptina,mt9v032";
33		reg = <0x5c>;
34
35		port {
36			mt9v032_out: endpoint {
37				link-frequencies = /bits/ 64
38					<13000000 26600000 27000000>;
39			};
40		};
41	};
42