Searched +full:video +full:- +full:reset +full:- +full:gpios (Results 1 – 25 of 178) sorted by relevance
12345678
| /Linux-v6.1/Documentation/devicetree/bindings/display/bridge/ |
| D | ps8640.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: MIPI DSI to eDP Video Format Converter Device Tree Bindings
10 - Nicolas Boichat <drinkcat@chromium.org>
13 The PS8640 is a low power MIPI-to-eDP video format converter supporting
28 powerdown-gpios:
32 reset-gpios:
34 description: GPIO connected to active low reset.
36 vdd12-supply:
[all …]
|
| D | ps8622.txt | 1 ps8622-bridge bindings
4 - compatible: "parade,ps8622" or "parade,ps8625"
5 - reg: first i2c address of the bridge
6 - sleep-gpios: OF device-tree gpio specification for PD_ pin.
7 - reset-gpios: OF device-tree gpio specification for RST_ pin.
10 - lane-count: number of DP lanes to use
11 - use-external-pwm: backlight will be controlled by an external PWM
12 - video interfaces: Device node can contain video interface port
15 [1]: Documentation/devicetree/bindings/media/video-interfaces.txt
18 lvds-bridge@48 {
[all …]
|
| D | toshiba,tc358775.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Vinay Simha BN <simhavcs@gmail.com>
15 MIPI DSI-RX Data 4-lane, CLK 1-lane with data rates up to 800 Mbps/lane.
16 Video frame size:
17 Up to 1600x1200 24-bit/pixel resolution for single-link LVDS display panel
19 Up to WUXGA (1920x1200 24-bit pixels) resolution for dual-link LVDS display
30 vdd-supply:
33 vddio-supply:
[all …]
|
| D | nxp,ptn3460.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Sean Paul <seanpaul@chromium.org>
20 edid-emulation:
34 powerdown-gpios:
38 reset-gpios:
49 Video port for LVDS output
54 Video port for eDP input
57 - port@0
[all …]
|
| D | analogix,anx7814.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Analogix ANX7814 SlimPort (Full-HD Transmitter)
10 - Andrzej Hajda <andrzej.hajda@intel.com>
11 - Neil Armstrong <neil.armstrong@linaro.org>
12 - Robert Foss <robert.foss@linaro.org>
17 - analogix,anx7808
18 - analogix,anx7812
19 - analogix,anx7814
[all …]
|
| D | anx6345.yaml | 1 # SPDX-License-Identifier: GPL-2.0
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Torsten Duwe <duwe@lst.de>
13 The ANX6345 is an ultra-low power Full-HD eDP transmitter designed for
24 reset-gpios:
26 description: GPIO connected to active low reset
28 dvdd12-supply:
31 dvdd25-supply:
41 Video port for LVTTL input
[all …]
|
| D | ite,it6505.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Allen Chen <allen.chen@ite.com.tw>
13 The IT6505 is a high-performance DisplayPort 1.1a transmitter,
16 and ensures robust transmission of high-quality uncompressed video
19 Aside from the various video output formats supported, the IT6505
27 transmission of high-definition content. Users of the IT6505 need not
37 ovdd-supply:
40 pwr18-supply:
[all …]
|
| D | sil-sii8620.txt | 4 - compatible: "sil,sii8620"
5 - reg: i2c address of the bridge
6 - cvcc10-supply: Digital Core Supply Voltage (1.0V)
7 - iovcc18-supply: I/O Supply Voltage (1.8V)
8 - interrupts: interrupt specifier of INT pin
9 - reset-gpios: gpio specifier of RESET pin
10 - clocks, clock-names: specification and name of "xtal" clock
11 - video interfaces: Device node can contain video interface port
14 [1]: Documentation/devicetree/bindings/media/video-interfaces.txt
20 cvcc10-supply = <&ldo36_reg>;
[all …]
|
| /Linux-v6.1/Documentation/devicetree/bindings/media/i2c/ |
| D | mt9m001.txt | 1 MT9M001: 1/2-Inch Megapixel Digital Image Sensor
3 The MT9M001 is an SXGA-format with a 1/2-inch CMOS active-pixel digital
8 - compatible: shall be "onnn,mt9m001".
9 - clocks: reference to the master clock into sensor
13 - reset-gpios: GPIO handle which is connected to the reset pin of the chip.
15 - standby-gpios: GPIO handle which is connected to the standby pin of the chip.
19 sub-node for its digital output video port, in accordance with the video
21 Documentation/devicetree/bindings/media/video-interfaces.txt
26 camera-sensor@5d {
29 reset-gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
[all …]
|
| D | ov9650.txt | 4 - compatible: shall be one of
7 - clocks: reference to the xvclk input clock.
10 - reset-gpios: reference to the GPIO connected to the resetb pin, if any.
12 - powerdown-gpios: reference to the GPIO connected to the pwdn pin, if any.
16 subnode for its digital output video port, in accordance with the video
18 video-interfaces.txt.
26 reset-gpios = <&axi_gpio_0 0 GPIO_ACTIVE_HIGH>;
27 powerdown-gpios = <&axi_gpio_0 1 GPIO_ACTIVE_HIGH>;
32 remote-endpoint = <&vcap1_in0>;
|
| D | ov5645.txt | 1 * Omnivision 1/4-Inch 5Mp CMOS Digital Image Sensor
3 The Omnivision OV5645 is a 1/4-Inch CMOS active pixel digital image sensor with
8 - compatible: Value should be "ovti,ov5645".
9 - clocks: Reference to the xclk clock.
10 - clock-names: Should be "xclk".
11 - clock-frequency: Frequency of the xclk clock.
12 - enable-gpios: Chip enable GPIO. Polarity is GPIO_ACTIVE_HIGH. This corresponds
14 - reset-gpios: Chip reset GPIO. Polarity is GPIO_ACTIVE_LOW. This corresponds to
16 - vdddo-supply: Chip digital IO regulator.
17 - vdda-supply: Chip analog regulator.
[all …]
|
| D | ov7670.txt | 8 - compatible: should be "ovti,ov7670"
9 - clocks: reference to the xclk input clock.
10 - clock-names: should be "xclk".
13 - hsync-active: active state of the HSYNC signal, 0/1 for LOW/HIGH respectively.
14 - vsync-active: active state of the VSYNC signal, 0/1 for LOW/HIGH respectively.
17 - reset-gpios: reference to the GPIO connected to the resetb pin, if any.
19 - powerdown-gpios: reference to the GPIO connected to the pwdn pin, if any.
21 - ov7670,pclk-hb-disable: a boolean property to suppress pixel clock output
25 sub-node for its digital output video port, in accordance with the video
27 Documentation/devicetree/bindings/media/video-interfaces.txt.
[all …]
|
| D | ov2685.txt | 1 * Omnivision OV2685 MIPI CSI-2 sensor
4 - compatible: shall be "ovti,ov2685"
5 - clocks: reference to the xvclk input clock
6 - clock-names: shall be "xvclk"
7 - avdd-supply: Analog voltage supply, 2.8 volts
8 - dovdd-supply: Digital I/O voltage supply, 1.8 volts
9 - dvdd-supply: Digital core voltage supply, 1.8 volts
10 - reset-gpios: Low active reset gpio
13 'endpoint' subnode for its digital output video port,
14 in accordance with the video interface bindings defined in
[all …]
|
| D | ov5695.txt | 1 * Omnivision OV5695 MIPI CSI-2 sensor
4 - compatible: shall be "ovti,ov5695"
5 - clocks: reference to the xvclk input clock
6 - clock-names: shall be "xvclk"
7 - avdd-supply: Analog voltage supply, 2.8 volts
8 - dovdd-supply: Digital I/O voltage supply, 1.8 volts
9 - dvdd-supply: Digital core voltage supply, 1.2 volts
10 - reset-gpios: Low active reset gpio
13 'endpoint' subnode for its digital output video port,
14 in accordance with the video interface bindings defined in
[all …]
|
| D | tvp5150.txt | 1 * Texas Instruments TVP5150 and TVP5151 video decoders
3 The TVP5150 and TVP5151 are video decoders that convert baseband NTSC and PAL
4 (and also SECAM in the TVP5151 case) video signals to either 8-bit 4:2:2 YUV
5 with discrete syncs or 8-bit ITU-R BT.656 with embedded syncs output formats.
9 - compatible: Value must be "ti,tvp5150".
10 - reg: I2C slave address.
14 - pdn-gpios: Phandle for the GPIO connected to the PDN pin, if any.
15 - reset-gpios: Phandle for the GPIO connected to the RESETB pin, if any.
18 and output port, in accordance with the video interface bindings defined in
19 Documentation/devicetree/bindings/media/video-interfaces.txt. The port nodes
[all …]
|
| D | imx290.txt | 1 * Sony IMX290 1/2.8-Inch CMOS Image Sensor
3 The Sony IMX290 is a 1/2.8-Inch CMOS Solid-state image sensor with
4 Square Pixel for Color Cameras. It is programmable through I2C and 4-wire
6 Low voltage LVDS DDR output and CSI-2 serial data output. The CSI-2 bus is the
10 - compatible: Should be "sony,imx290"
11 - reg: I2C bus address of the device
12 - clocks: Reference to the xclk clock.
13 - clock-names: Should be "xclk".
14 - clock-frequency: Frequency of the xclk clock in Hz.
15 - vdddo-supply: Sensor digital IO regulator.
[all …]
|
| D | ov7740.txt | 7 The common video interfaces bindings (see video-interfaces.txt) should
12 - compatible: "ovti,ov7740".
13 - reg: I2C slave address of the sensor.
14 - clocks: Reference to the xvclk input clock.
15 - clock-names: "xvclk".
18 - reset-gpios: Rreference to the GPIO connected to the reset_b pin,
19 if any. Active low with pull-ip resistor.
20 - powerdown-gpios: Reference to the GPIO connected to the pwdn pin,
21 if any. Active high with pull-down resistor.
24 - remote-endpoint: A phandle to the bus receiver's endpoint node.
[all …]
|
| D | ovti,ov02a10.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
4 ---
6 $schema: http://devicetree.org/meta-schemas/core.yaml#
11 - Dongchun Zhu <dongchun.zhu@mediatek.com>
13 description: |-
14 The Omnivision OV02A10 is a low-cost, high performance, 1/5-inch, 2 megapixel
17 @ 1600x1200 (UXGA) resolution transferred over a 1-lane MIPI interface. The
18 sensor output is available via CSI-2 serial data output.
21 - $ref: /schemas/media/video-interface-devices.yaml#
33 clock-names:
[all …]
|
| D | mipi-ccs.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2 # Copyright (C) 2014--2020 Intel Corporation
4 ---
5 $id: http://devicetree.org/schemas/media/i2c/mipi-ccs.yaml#
6 $schema: http://devicetree.org/meta-schemas/core.yaml#
11 - Sakari Ailus <sakari.ailus@linux.intel.com>
17 <URL:https://www.mipi.org/specifications/camera-command-set>.
24 Documentation/devicetree/bindings/media/video-interfaces.txt .
29 - items:
30 - const: mipi-ccs-1.1
[all …]
|
| D | ovti,ov772x.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Jacopo Mondi <jacopo@jmondi.org>
20 - ovti,ov7720
21 - ovti,ov7725
29 reset-gpios:
34 powerdown-gpios:
40 $ref: /schemas/graph.yaml#/$defs/port-base
42 Video output port.
[all …]
|
| D | ovti,ov5640.yaml | 1 # SPDX-License-Identifier: GPL-2.0
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Steve Longerbeam <slongerbeam@gmail.com>
13 - $ref: /schemas/media/video-interface-devices.yaml#
25 clock-names:
28 AVDD-supply:
31 DVDD-supply:
34 DOVDD-supply:
37 powerdown-gpios:
[all …]
|
| /Linux-v6.1/Documentation/devicetree/bindings/display/panel/ |
| D | novatek,nt36672a.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Sumit Semwal <sumit.semwal@linaro.org>
16 resolution of 1080x2246. It is a video mode DSI panel.
19 - $ref: panel-common.yaml#
24 - enum:
25 - tianma,fhd-video
26 - const: novatek,nt36672a
32 reset-gpios:
[all …]
|
| D | orisetech,otm8009a.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Orise Tech OTM8009A 3.97" 480x800 TFT LCD panel (MIPI-DSI video mode)
10 - Philippe CORNU <philippe.cornu@foss.st.com>
14 a MIPI-DSI video interface. Its backlight is managed through the DSI link.
16 - $ref: panel-common.yaml#
27 enable-gpios: true
29 power-supply: true
31 reset-gpios:
[all …]
|
| D | mantix,mlaf057we51-x.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/display/panel/mantix,mlaf057we51-x.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Mantix MLAF057WE51-X 5.7" 720x1440 TFT LCD panel
10 - Guido Günther <agx@sigxcpu.org>
14 a MIPI-DSI video interface.
17 - $ref: panel-common.yaml#
22 - mantix,mlaf057we51-x
23 - ys,ys57pss36bh5gq
[all …]
|
| /Linux-v6.1/Documentation/devicetree/bindings/media/ |
| D | samsung-s5c73m3.txt | 2 ------------------------------
4 The S5C73M3 camera ISP supports MIPI CSI-2 and parallel (ITU-R BT.656) video
11 ---------------------
15 - compatible : "samsung,s5c73m3";
16 - reg : I2C slave address of the sensor;
17 - vdd-int-supply : digital power supply (1.2V);
18 - vdda-supply : analog power supply (1.2V);
19 - vdd-reg-supply : regulator input power supply (2.8V);
20 - vddio-host-supply : host I/O power supply (1.8V to 2.8V);
21 - vddio-cis-supply : CIS I/O power supply (1.2V to 1.8V);
[all …]
|
12345678
