Home
last modified time | relevance | path

Searched +full:vdd1 +full:- +full:supply (Results 1 – 24 of 24) sorted by relevance

/Linux-v5.15/Documentation/devicetree/bindings/display/panel/
Dsamsung,s6d16d0.yaml1 # SPDX-License-Identifier: GPL-2.0
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Linus Walleij <linus.walleij@linaro.org>
13 - $ref: panel-common.yaml#
21 reset-gpios: true
23 vdd1-supply:
24 description: I/O voltage supply
27 - compatible
28 - reg
[all …]
/Linux-v5.15/Documentation/devicetree/bindings/mfd/
Dtps65910.txt4 - compatible: "ti,tps65910" or "ti,tps65911"
5 - reg: I2C slave address
6 - interrupts: the interrupt outputs of the controller
7 - #gpio-cells: number of cells to describe a GPIO, this should be 2.
10 - gpio-controller: mark the device as a GPIO controller
11 - #interrupt-cells: the number of cells to describe an IRQ, this should be 2.
14 Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
15 - regulators: This is the list of child nodes that specify the regulator
20 The regulator is matched with the regulator-compatible.
22 The valid regulator-compatible values are:
[all …]
/Linux-v5.15/Documentation/devicetree/bindings/sound/
Dti,pcm3168a.txt7 - compatible: "ti,pcm3168a"
9 - clocks : Contains an entry for each entry in clock-names
11 - clock-names : Includes the following entries:
14 - VDD1-supply : Digital power supply regulator 1 (+3.3V)
16 - VDD2-supply : Digital power supply regulator 2 (+3.3V)
18 - VCCAD1-supply : ADC power supply regulator 1 (+5V)
20 - VCCAD2-supply : ADC power supply regulator 2 (+5V)
22 - VCCDA1-supply : DAC power supply regulator 1 (+5V)
24 - VCCDA2-supply : DAC power supply regulator 2 (+5V)
30 - reset-gpios : Optional reset gpio line connected to RST pin of the codec.
[all …]
/Linux-v5.15/arch/arm/boot/dts/
Dtwl4030.dtsi1 // SPDX-License-Identifier: GPL-2.0-only
3 * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
11 interrupt-controller;
12 #interrupt-cells = <1>;
15 compatible = "ti,twl4030-rtc";
20 compatible = "ti,twl4030-bci";
22 bci3v1-supply = <&vusb3v1>;
23 io-channels = <&twl_madc 11>;
24 io-channel-names = "vac";
28 compatible = "ti,twl4030-wdt";
[all …]
Dtegra30-asus-nexus7-grouper-ti-pmic.dtsi1 // SPDX-License-Identifier: GPL-2.0
3 #include <dt-bindings/interrupt-controller/arm-gic.h>
4 #include <dt-bindings/gpio/gpio.h>
13 #interrupt-cells = <2>;
14 interrupt-controller;
15 wakeup-source;
17 ti,en-gpio-sleep = <0 0 1 0 0 0 0 0 0>;
18 ti,system-power-controller;
19 ti,sleep-keep-ck32k;
20 ti,sleep-enable;
[all …]
Dste-href-stuib.dtsi1 // SPDX-License-Identifier: GPL-2.0-or-later
3 * Copyright 2012 ST-Ericsson AB
6 #include <dt-bindings/interrupt-controller/irq.h>
10 compatible = "gpio-keys";
11 #address-cells = <1>;
12 #size-cells = <0>;
13 vdd-supply = <&ab8500_ldo_aux1_reg>;
14 pinctrl-names = "default";
15 pinctrl-0 = <&prox_stuib_mode>, <&hall_stuib_mode>;
37 interrupt-parent = <&gpio6>;
[all …]
Domap3-lilly-a83x.dtsi1 // SPDX-License-Identifier: GPL-2.0-or-later
9 model = "INCOstartec LILLY-A83X module (DM3730)";
10 compatible = "incostartec,omap3-lilly-a83x", "ti,omap3630", "ti,omap36xx", "ti,omap3";
22 compatible = "gpio-leds";
25 label = "lilly-a83x::led1";
27 linux,default-trigger = "default-on";
33 compatible = "ti,omap-twl4030";
34 ti,model = "lilly-a83x";
40 compatible = "regulator-fixed";
41 regulator-name = "VCC3";
[all …]
Dste-href-tvk1281618-r2.dtsi1 // SPDX-License-Identifier: GPL-2.0-or-later
6 #include <dt-bindings/interrupt-controller/irq.h>
7 #include <dt-bindings/input/input.h>
11 compatible = "gpio-keys";
12 #address-cells = <1>;
13 #size-cells = <0>;
14 vdd-supply = <&ab8500_ldo_aux1_reg>;
15 pinctrl-names = "default";
16 pinctrl-0 = <&prox_tvk_mode>, <&hall_tvk_mode>;
37 interrupt-parent = <&gpio6>;
[all …]
Dam335x-lxm.dts1 // SPDX-License-Identifier: GPL-2.0-only
3 * Copyright (C) 2014 NovaTech LLC - https://www.novatechweb.com
5 /dts-v1/;
11 compatible = "novatech,am335x-lxm", "ti,am33xx";
15 cpu0-supply = <&vdd1_reg>;
24 /* Power supply provides a fixed 5V @2A */
26 compatible = "regulator-fixed";
27 regulator-name = "vbat";
28 regulator-min-microvolt = <5000000>;
29 regulator-max-microvolt = <5000000>;
[all …]
Dtegra30-cardhu.dtsi1 // SPDX-License-Identifier: GPL-2.0
2 #include <dt-bindings/input/input.h>
3 #include <dt-bindings/thermal/thermal.h>
5 #include "tegra30-cpu-opp.dtsi"
6 #include "tegra30-cpu-opp-microvolt.dtsi"
16 * use tegra30-cardhu-a02.dts, Cardhu fab version A04 and later, use
17 * tegra30-cardhu-a04.dts.
20 * The sticker will have number like 600-81291-1000-002 C.3. In this 4th
22 * The (downstream internal) U-Boot of Cardhu display the board-id as
43 stdout-path = "serial0:115200n8";
[all …]
Dtegra30-colibri.dtsi1 // SPDX-License-Identifier: GPL-2.0
15 nvidia,ddc-i2c-bus = <&hdmi_ddc>;
16 nvidia,hpd-gpio =
18 pll-supply = <&reg_1v8_avdd_hdmi_pll>;
19 vdd-supply = <&reg_3v3_avdd_hdmi>;
24 pinctrl-names = "default";
25 pinctrl-0 = <&state_default>;
28 /* Analogue Audio (On-module) */
29 clk1-out-pw4 {
34 nvidia,enable-input = <TEGRA_PIN_DISABLE>;
[all …]
Dtegra30-apalis-v1.1.dtsi1 // SPDX-License-Identifier: GPL-2.0 OR MIT
16 avdd-pexa-supply = <&vdd2_reg>;
17 avdd-pexb-supply = <&vdd2_reg>;
18 avdd-pex-pll-supply = <&vdd2_reg>;
19 avdd-plle-supply = <&ldo6_reg>;
20 hvdd-pex-supply = <&reg_module_3v3>;
21 vddio-pex-ctl-supply = <&reg_module_3v3>;
22 vdd-pexa-supply = <&vdd2_reg>;
23 vdd-pexb-supply = <&vdd2_reg>;
27 nvidia,num-lanes = <4>;
[all …]
Dtegra30-apalis.dtsi1 // SPDX-License-Identifier: GPL-2.0
15 avdd-pexa-supply = <&vdd2_reg>;
16 avdd-pexb-supply = <&vdd2_reg>;
17 avdd-pex-pll-supply = <&vdd2_reg>;
18 avdd-plle-supply = <&ldo6_reg>;
19 hvdd-pex-supply = <&reg_module_3v3>;
20 vddio-pex-ctl-supply = <&reg_module_3v3>;
21 vdd-pexa-supply = <&vdd2_reg>;
22 vdd-pexb-supply = <&vdd2_reg>;
26 nvidia,num-lanes = <4>;
[all …]
Dtegra30-beaver.dts1 // SPDX-License-Identifier: GPL-2.0
2 /dts-v1/;
5 #include "tegra30-cpu-opp.dtsi"
6 #include "tegra30-cpu-opp-microvolt.dtsi"
19 stdout-path = "serial0:115200n8";
29 avdd-pexa-supply = <&ldo1_reg>;
30 vdd-pexa-supply = <&ldo1_reg>;
31 avdd-pexb-supply = <&ldo1_reg>;
32 vdd-pexb-supply = <&ldo1_reg>;
33 avdd-pex-pll-supply = <&ldo1_reg>;
[all …]
Daspeed-bmc-opp-mihawk.dts1 // SPDX-License-Identifier: GPL-2.0+
2 /dts-v1/;
3 #include "aspeed-g5.dtsi"
4 #include <dt-bindings/gpio/aspeed-gpio.h>
5 #include <dt-bindings/leds/leds-pca955x.h>
9 compatible = "ibm,mihawk-bmc", "aspeed,ast2500";
59 stdout-path = &uart5;
67 reserved-memory {
68 #address-cells = <1>;
69 #size-cells = <1>;
[all …]
Dtegra30-ouya.dts1 // SPDX-License-Identifier: GPL-2.0
2 /dts-v1/;
4 #include <dt-bindings/input/gpio-keys.h>
5 #include <dt-bindings/input/input.h>
6 #include <dt-bindings/thermal/thermal.h>
9 #include "tegra30-cpu-opp.dtsi"
10 #include "tegra30-cpu-opp-microvolt.dtsi"
26 stdout-path = "serial0:115200n8";
33 reserved-memory {
34 #address-cells = <1>;
[all …]
/Linux-v5.15/Documentation/devicetree/bindings/display/bridge/
Dchipone,icn6211.yaml1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Chipone ICN6211 MIPI-DSI to RGB Converter bridge
10 - Jagan Teki <jagan@amarulasolutions.com>
13 ICN6211 is MIPI-DSI to RGB Converter bridge from chipone.
21 - chipone,icn6211
27 enable-gpios:
30 vdd1-supply:
31 description: A 1.8V/2.5V/3.3V supply that power the MIPI RX.
[all …]
/Linux-v5.15/Documentation/devicetree/bindings/display/
Dste,mcde.yaml1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: ST-Ericsson Multi Channel Display Engine MCDE
10 - Linus Walleij <linus.walleij@linaro.org>
25 - description: MCDECLK (main MCDE clock)
26 - description: LCDCLK (LCD clock)
27 - description: PLLDSI (HDMI clock)
29 clock-names:
31 - const: mcde
[all …]
/Linux-v5.15/drivers/gpu/drm/panel/
Dpanel-samsung-s6d16d0.c1 // SPDX-License-Identifier: GPL-2.0+
3 * MIPI-DSI Samsung s6d16d0 panel driver. This is a 864x480
4 * AMOLED panel with a command-only DSI interface.
20 struct regulator *supply; member
51 struct mipi_dsi_device *dsi = to_mipi_dsi_device(s6->dev); in s6d16d0_unprepare()
57 dev_err(s6->dev, "failed to enter sleep mode (%d)\n", ret); in s6d16d0_unprepare()
62 gpiod_set_value_cansleep(s6->reset_gpio, 1); in s6d16d0_unprepare()
63 regulator_disable(s6->supply); in s6d16d0_unprepare()
71 struct mipi_dsi_device *dsi = to_mipi_dsi_device(s6->dev); in s6d16d0_prepare()
74 ret = regulator_enable(s6->supply); in s6d16d0_prepare()
[all …]
/Linux-v5.15/arch/arm64/boot/dts/renesas/
Dulcb-kf.dtsi1 // SPDX-License-Identifier: GPL-2.0
10 * SSI-PCM3168A
11 * aplay -D plughw:0,2 xxx.wav
12 * arecord -D plughw:0,3 xxx.wav
23 #clock-cells = <0>;
24 compatible = "gpio-mux-clock";
26 select-gpios = <&gpio_exp_75 13 GPIO_ACTIVE_HIGH>;
29 snd_3p3v: regulator-snd_3p3v {
30 compatible = "regulator-fixed";
31 regulator-name = "snd-3.3v";
[all …]
/Linux-v5.15/arch/arm64/boot/dts/ti/
Dk3-j721e-common-proc-board.dts1 // SPDX-License-Identifier: GPL-2.0
3 * Copyright (C) 2019 Texas Instruments Incorporated - https://www.ti.com/
6 /dts-v1/;
8 #include "k3-j721e-som-p0.dtsi"
9 #include <dt-bindings/gpio/gpio.h>
10 #include <dt-bindings/input/input.h>
11 #include <dt-bindings/net/ti-dp83867.h>
12 #include <dt-bindings/phy/phy-cadence.h>
16 stdout-path = "serial2:115200n8";
20 gpio_keys: gpio-keys {
[all …]
/Linux-v5.15/arch/arm64/boot/dts/qcom/
Dsc7180-trogdor.dtsi1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
8 #include <dt-bindings/gpio/gpio.h>
9 #include <dt-bindings/input/gpio-keys.h>
10 #include <dt-bindings/input/input.h>
11 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
12 #include <dt-bindings/sound/sc7180-lpass.h>
19 thermal-zones {
20 charger_thermal: charger-thermal {
21 polling-delay-passive = <0>;
22 polling-delay = <0>;
[all …]
/Linux-v5.15/drivers/mfd/
Dtwl-core.c1 // SPDX-License-Identifier: GPL-2.0-or-later
3 * twl_core.c - driver for TWL4030/TWL5030/TWL60X0/TPS659x0 PM
6 * Copyright (C) 2005-2006 Texas Instruments, Inc.
37 #include <linux/mfd/twl4030-audio.h>
39 #include "twl-core.h"
42 * The TWL4030 "Triton 2" is one of a family of a multi-function "Power
60 /* subchip/slave 0 - USB ID */
63 /* subchip/slave 1 - AUD ID */
70 /* subchip/slave 2 - AUX ID */
83 /* subchip/slave 3 - POWER ID */
[all …]
/Linux-v5.15/sound/soc/codecs/
Dpcm3168a.c1 // SPDX-License-Identifier: GPL-2.0-only
40 "VDD1",
111 static const char *const pcm3168a_con[] = { "Differential", "Single-Ended" };
129 /* -100db to 0db, register values 0-54 cause mute */
130 static const DECLARE_TLV_DB_SCALE(pcm3168a_dac_tlv, -10050, 50, 1);
132 /* -100db to 20db, register values 0-14 cause mute */
133 static const DECLARE_TLV_DB_SCALE(pcm3168a_adc_tlv, -10050, 50, 1);
136 SOC_SINGLE("DAC Power-Save Switch", PCM3168A_DAC_PWR_MST_FMT,
138 SOC_ENUM("DAC1 Digital Filter roll-off", pcm3168a_d1_roll_off),
139 SOC_ENUM("DAC2 Digital Filter roll-off", pcm3168a_d2_roll_off),
[all …]