| /Linux-v5.10/arch/arm64/boot/dts/qcom/ |
| D | sdm845-db845c.dts | 1 // SPDX-License-Identifier: GPL-2.0
6 /dts-v1/;
8 #include <dt-bindings/gpio/gpio.h>
9 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
10 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
11 #include <dt-bindings/sound/qcom,q6afe.h>
12 #include <dt-bindings/sound/qcom,q6asm.h>
27 stdout-path = "serial0:115200n8";
30 dc12v: dc12v-regulator {
31 compatible = "regulator-fixed";
[all …]
|
| D | qrb5165-rb5.dts | 1 // SPDX-License-Identifier: BSD-3-Clause
6 /dts-v1/;
8 #include <dt-bindings/gpio/gpio.h>
9 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
17 compatible = "qcom,qrb5165-rb5", "qcom,sm8250";
24 stdout-path = "serial0:115200n8";
27 dc12v: dc12v-regulator {
28 compatible = "regulator-fixed";
29 regulator-name = "DC12V";
30 regulator-min-microvolt = <12000000>;
[all …]
|
| /Linux-v5.10/Documentation/devicetree/bindings/sound/ |
| D | qcom,wcd9335.txt | 3 Qualcomm WCD9335 Codec is a standalone Hi-Fi audio codec IC, supports
5 the MSM8996, MSM8976, and MSM8956 chipsets. It has in-built
11 - compatible:
21 - reg
26 - interrupts
28 Value type: <prop-encoded-array>
31 - interrupt-names:
37 - reset-gpios:
42 - slim-ifc-dev:
47 - clocks:
[all …]
|
| D | qcom,wcd934x.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
13 Qualcomm WCD9340/WCD9341 Codec is a standalone Hi-Fi audio codec IC.
14 It has in-built Soundwire controller, pin controller, interrupt mux and
27 reset-gpios:
31 slim-ifc-dev: true
36 clock-names:
39 vdd-buck-supply:
[all …]
|
| /Linux-v5.10/arch/arm/boot/dts/ |
| D | sun8i-a83t-tbs-a711.dts | 5 * This file is dual-licensed: you can use it either under the terms
44 /dts-v1/;
45 #include "sun8i-a83t.dtsi"
47 #include <dt-bindings/gpio/gpio.h>
48 #include <dt-bindings/pwm/pwm.h>
49 #include <dt-bindings/input/input.h>
53 compatible = "tbs-biometrics,a711", "allwinner,sun8i-a83t";
61 stdout-path = "serial0:115200n8";
65 compatible = "pwm-backlight";
67 enable-gpios = <&pio 3 29 GPIO_ACTIVE_HIGH>;
[all …]
|
| D | omap4-sdp.dts | 1 // SPDX-License-Identifier: GPL-2.0-only
3 * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
5 /dts-v1/;
9 #include "omap4-mcpdm.dtsi"
13 compatible = "ti,omap4-sdp", "ti,omap4430", "ti,omap4";
26 vdd_eth: fixedregulator-vdd-eth {
27 pinctrl-names = "default";
28 pinctrl-0 = <&enet_enable_gpio>;
30 compatible = "regulator-fixed";
31 regulator-name = "VDD_ETH";
[all …]
|
| D | sun8i-h3-nanopi-duo2.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
6 /dts-v1/;
7 #include "sun8i-h3.dtsi"
8 #include "sunxi-common-regulators.dtsi"
10 #include <dt-bindings/gpio/gpio.h>
11 #include <dt-bindings/input/input.h>
15 compatible = "friendlyarm,nanopi-duo2", "allwinner,sun8i-h3";
22 stdout-path = "serial0:115200n8";
26 compatible = "gpio-leds";
31 default-state = "on";
[all …]
|
| D | sun8i-h2-plus-bananapi-m2-zero.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
5 * Based on sun8i-h3-bananapi-m2-plus.dts, which is:
6 * Copyright (C) 2016 Chen-Yu Tsai <wens@csie.org>
9 /dts-v1/;
10 #include "sun8i-h3.dtsi"
11 #include "sunxi-common-regulators.dtsi"
13 #include <dt-bindings/gpio/gpio.h>
14 #include <dt-bindings/input/input.h>
17 model = "Banana Pi BPI-M2-Zero";
18 compatible = "sinovoip,bpi-m2-zero", "allwinner,sun8i-h2-plus";
[all …]
|
| D | exynos5250-snow-common.dtsi | 1 // SPDX-License-Identifier: GPL-2.0
8 #include <dt-bindings/gpio/gpio.h>
9 #include <dt-bindings/clock/maxim,max77686.h>
10 #include <dt-bindings/interrupt-controller/irq.h>
11 #include <dt-bindings/input/input.h>
12 #include <dt-bindings/sound/samsung-i2s.h>
27 stdout-path = "serial3:115200n8";
30 gpio-keys {
31 compatible = "gpio-keys";
32 pinctrl-names = "default";
[all …]
|
| D | am335x-evmsk.dts | 1 // SPDX-License-Identifier: GPL-2.0-only
3 * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
11 /dts-v1/;
14 #include <dt-bindings/pwm/pwm.h>
15 #include <dt-bindings/interrupt-controller/irq.h>
18 model = "TI AM335x EVM-SK";
19 compatible = "ti,am335x-evmsk", "ti,am33xx";
23 cpu0-supply = <&vdd1_reg>;
33 stdout-path = &uart0;
36 vbat: fixedregulator0 { label
[all …]
|
| D | sun8i-r16-bananapi-m2m.dts | 2 * Copyright (c) 2017 Free Electrons <maxime.ripard@free-electrons.com>
4 * This file is dual-licensed: you can use it either under the terms
43 /dts-v1/;
44 #include "sun8i-a33.dtsi"
46 #include <dt-bindings/gpio/gpio.h>
50 compatible = "sinovoip,bananapi-m2m", "allwinner,sun8i-a33";
61 stdout-path = "serial0:115200n8";
65 compatible = "gpio-leds";
68 label = "bpi-m2m:blue:usr";
73 label = "bpi-m2m:green:usr";
[all …]
|
| D | exynos5800-peach-pi.dts | 1 // SPDX-License-Identifier: GPL-2.0
8 /dts-v1/;
9 #include <dt-bindings/input/input.h>
10 #include <dt-bindings/gpio/gpio.h>
11 #include <dt-bindings/interrupt-controller/irq.h>
12 #include <dt-bindings/clock/maxim,max77802.h>
13 #include <dt-bindings/regulator/maxim,max77802.h>
14 #include <dt-bindings/sound/samsung-i2s.h>
16 #include "exynos5420-cpus.dtsi"
21 compatible = "google,pi-rev16",
[all …]
|
| D | exynos5420-peach-pit.dts | 1 // SPDX-License-Identifier: GPL-2.0
8 /dts-v1/;
9 #include <dt-bindings/input/input.h>
10 #include <dt-bindings/gpio/gpio.h>
11 #include <dt-bindings/interrupt-controller/irq.h>
12 #include <dt-bindings/clock/maxim,max77802.h>
13 #include <dt-bindings/regulator/maxim,max77802.h>
14 #include <dt-bindings/sound/samsung-i2s.h>
16 #include "exynos5420-cpus.dtsi"
21 compatible = "google,pit-rev16",
[all …]
|
| D | am335x-evm.dts | 1 // SPDX-License-Identifier: GPL-2.0-only
3 * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
5 /dts-v1/;
8 #include <dt-bindings/interrupt-controller/irq.h>
12 compatible = "ti,am335x-evm", "ti,am33xx";
16 cpu0-supply = <&vdd1_reg>;
26 stdout-path = &uart0;
29 vbat: fixedregulator0 { label
30 compatible = "regulator-fixed";
31 regulator-name = "vbat";
[all …]
|
| D | sun8i-a83t-bananapi-m3.dts | 2 * Copyright 2017 Chen-Yu Tsai
4 * Chen-Yu Tsai <wens@csie.org>
6 * This file is dual-licensed: you can use it either under the terms
45 /dts-v1/;
46 #include "sun8i-a83t.dtsi"
48 #include <dt-bindings/gpio/gpio.h>
51 model = "Banana Pi BPI-M3";
52 compatible = "sinovoip,bpi-m3", "allwinner,sun8i-a83t";
60 stdout-path = "serial0:115200n8";
64 compatible = "hdmi-connector";
[all …]
|
| D | sun8i-a83t-cubietruck-plus.dts | 2 * Copyright 2015 Chen-Yu Tsai
4 * Chen-Yu Tsai <wens@csie.org>
6 * This file is dual-licensed: you can use it either under the terms
45 /dts-v1/;
46 #include "sun8i-a83t.dtsi"
48 #include <dt-bindings/gpio/gpio.h>
52 compatible = "cubietech,cubietruck-plus", "allwinner,sun8i-a83t";
60 stdout-path = "serial0:115200n8";
63 hdmi-connector {
64 compatible = "hdmi-connector";
[all …]
|
| D | sun8i-v40-bananapi-m2-berry.dts | 4 * This file is dual-licensed: you can use it either under the terms
43 /dts-v1/;
44 #include "sun8i-r40.dtsi"
46 #include <dt-bindings/gpio/gpio.h>
50 compatible = "sinovoip,bpi-m2-berry", "allwinner,sun8i-r40";
58 stdout-path = "serial0:115200n8";
62 compatible = "hdmi-connector";
67 remote-endpoint = <&hdmi_out_con>;
73 compatible = "gpio-leds";
75 pwr-led {
[all …]
|
| D | sun8i-r40-bananapi-m2-ultra.dts | 2 * Copyright (C) 2017 Chen-Yu Tsai <wens@csie.org>
5 * This file is dual-licensed: you can use it either under the terms
44 /dts-v1/;
45 #include "sun8i-r40.dtsi"
47 #include <dt-bindings/gpio/gpio.h>
50 model = "Banana Pi BPI-M2-Ultra";
51 compatible = "sinovoip,bpi-m2-ultra", "allwinner,sun8i-r40";
59 stdout-path = "serial0:115200n8";
63 compatible = "hdmi-connector";
68 remote-endpoint = <&hdmi_out_con>;
[all …]
|
| D | am335x-pepper.dts | 1 // SPDX-License-Identifier: GPL-2.0-only
3 * Copyright (C) 2014 Gumstix, Inc. - https://www.gumstix.com/
5 /dts-v1/;
7 #include <dt-bindings/input/input.h>
12 compatible = "gumstix,am335x-pepper", "ti,am33xx";
16 cpu0-supply = <&dcdc3_reg>;
26 compatible = "gpio-keys";
30 compatible = "gpio-leds";
38 compatible = "ti,da830-evm-audio";
41 vbat: fixedregulator0 { label
[all …]
|
| D | ste-ux500-samsung-golden.dts | 1 // SPDX-License-Identifier: GPL-2.0-only
2 /dts-v1/;
4 #include "ste-db8500.dtsi"
5 #include "ste-ab8505.dtsi"
6 #include "ste-dbx5x0-pinctrl.dtsi"
7 #include <dt-bindings/gpio/gpio.h>
8 #include <dt-bindings/input/input.h>
9 #include <dt-bindings/interrupt-controller/irq.h>
13 * You need an intermediate, device-tree compatible bootloader
16 * There is a port of (mainline) U-Boot, see
[all …]
|
| /Linux-v5.10/drivers/regulator/ |
| D | ab8500-ext.c | 1 // SPDX-License-Identifier: GPL-2.0-only
3 * Copyright (C) ST-Ericsson SA 2010
11 * ab8500-ext supports the following regulators:
12 * - VextSupply3
35 REGULATOR_SUPPLY("vcc", "gpio-keys.0"),
37 REGULATOR_SUPPLY("vcc", "2-0029"),
39 REGULATOR_SUPPLY("vdd", "2-0018"),
41 REGULATOR_SUPPLY("vdd", "2-0019"),
43 REGULATOR_SUPPLY("vdd", "2-001e"),
45 REGULATOR_SUPPLY("avdd", "3-005c"),
[all …]
|
| /Linux-v5.10/Documentation/devicetree/bindings/mfd/ |
| D | as3722.txt | 4 -------------------
5 - compatible: Must be "ams,as3722".
6 - reg: I2C device address.
7 - interrupt-controller: AS3722 has internal interrupt controller which takes the
8 interrupt request from internal sub-blocks like RTC, regulators, GPIOs as well
10 - #interrupt-cells: Should be set to 2 for IRQ number and flags.
12 of AS3722 are defined at dt-bindings/mfd/as3722.h
14 interrupts.txt, using dt-bindings/irq.
17 --------------------
18 - ams,enable-internal-int-pullup: Boolean property, to enable internal pullup on
[all …]
|
| /Linux-v5.10/arch/arm64/boot/dts/allwinner/ |
| D | sun50i-a64-bananapi-m64.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
4 /dts-v1/;
6 #include "sun50i-a64.dtsi"
7 #include "sun50i-a64-cpu-opp.dtsi"
9 #include <dt-bindings/gpio/gpio.h>
12 model = "BananaPi-M64";
13 compatible = "sinovoip,bananapi-m64", "allwinner,sun50i-a64";
22 stdout-path = "serial0:115200n8";
25 hdmi-connector {
26 compatible = "hdmi-connector";
[all …]
|
| D | sun50i-a64-orangepi-win.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
3 // Copyright (C) 2017-2018 Samuel Holland <samuel@sholland.org>
5 /dts-v1/;
7 #include "sun50i-a64.dtsi"
8 #include "sun50i-a64-cpu-opp.dtsi"
10 #include <dt-bindings/gpio/gpio.h>
14 compatible = "xunlong,orangepi-win", "allwinner,sun50i-a64";
26 stdout-path = "serial0:115200n8";
29 hdmi-connector {
30 compatible = "hdmi-connector";
[all …]
|
| /Linux-v5.10/drivers/power/supply/ |
| D | ab8500_charger.c | 1 // SPDX-License-Identifier: GPL-2.0-only
3 * Copyright (C) ST-Ericsson SA 2012
31 #include <linux/mfd/abx500/ab8500-bm.h>
92 /* Lowest charger voltage is 3.39V -> 0x4E */
110 /* UsbLineStatus register - usb types */
172 * struct ab8500_charger_interrupts - ab8500 interupts
216 * struct ab8500_charger - ab8500 Charger device information
222 * @vddadc_en_ac: Indicate if VDD ADC supply is enabled because AC
224 * @vddadc_en_usb: Indicate if VDD ADC supply is enabled because USB
226 * @vbat Battery voltage
[all …]
|
