Home
last modified time | relevance | path

Searched +full:usb2 +full:- +full:phy0 (Results 1 – 25 of 38) sorted by relevance

12

/Linux-v5.10/Documentation/devicetree/bindings/usb/
Damlogic,meson-g12a-usb-ctrl.yaml1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
4 ---
5 $id: "http://devicetree.org/schemas/usb/amlogic,meson-g12a-usb-ctrl.yaml#"
6 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
11 - Neil Armstrong <narmstrong@baylibre.com>
14 The Amlogic G12A embeds a DWC3 USB IP Core configured for USB2 and USB3
15 in host-only mode, and a DWC2 IP Core configured for USB2 peripheral mode
18 A glue connects the DWC3 core to USB2 PHYs and optionally to an USB3 PHY.
20 One of the USB2 PHYs can be re-routed in peripheral mode to a DWC2 USB IP.
25 The Amlogic A1 embeds a DWC3 USB IP Core configured for USB2 in
[all …]
/Linux-v5.10/arch/powerpc/boot/dts/fsl/
Dp1020utm-pc.dtsi2 * P1020 UTM-PC Device Tree Source stub (no addresses or top-level ranges)
37 #address-cells = <1>;
38 #size-cells = <1>;
39 compatible = "cfi-flash";
41 bank-width = <2>;
42 device-width = <1>;
64 /* 512KB for u-boot Bootloader Image */
65 /* 512KB for u-boot Environment Variables */
67 label = "NOR U-Boot Image";
68 read-only;
[all …]
Dp1020mbg-pc.dtsi2 * P1020 MBG-PC Device Tree Source stub (no addresses or top-level ranges)
37 #address-cells = <1>;
38 #size-cells = <1>;
39 compatible = "cfi-flash";
41 bank-width = <2>;
42 device-width = <1>;
66 label = "NOR Vitesse-7385 Firmware";
67 read-only;
72 /* 512KB for u-boot Bootloader Image */
73 /* 512KB for u-boot Environment Variables */
[all …]
Dp1020rdb-pc.dtsi2 * P1020 RDB-PC Device Tree Source stub (no addresses or top-level ranges)
37 #address-cells = <1>;
38 #size-cells = <1>;
39 compatible = "cfi-flash";
41 bank-width = <2>;
42 device-width = <1>;
48 label = "NOR Vitesse-7385 Firmware";
49 read-only;
72 /* 512KB for u-boot Bootloader Image */
73 /* 512KB for u-boot Environment Variables */
[all …]
Dp1025rdb.dtsi2 * P1025 RDB Device Tree Source stub (no addresses or top-level ranges)
37 #address-cells = <1>;
38 #size-cells = <1>;
39 compatible = "cfi-flash";
41 bank-width = <2>;
42 device-width = <1>;
48 label = "NOR Vitesse-7385 Firmware";
49 read-only;
72 /* 512KB for u-boot Bootloader Image */
73 /* 512KB for u-boot Environment Variables */
[all …]
Dp1020rdb.dtsi2 * P1020 RDB Device Tree Source stub (no addresses or top-level ranges)
4 * Copyright 2011-2012 Freescale Semiconductor Inc.
37 #address-cells = <1>;
38 #size-cells = <1>;
39 compatible = "cfi-flash";
41 bank-width = <2>;
42 device-width = <1>;
48 label = "NOR (RO) Vitesse-7385 Firmware";
49 read-only;
56 read-only;
[all …]
/Linux-v5.10/arch/arm64/boot/dts/amlogic/
Dmeson-g12b-a311d-khadas-vim3.dts1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
8 /dts-v1/;
10 #include "meson-g12b-a311d.dtsi"
11 #include "meson-khadas-vim3.dtsi"
12 #include "meson-g12b-khadas-vim3.dtsi"
19 * The VIM3 on-board MCU can mux the PCIe/USB3.0 shared differential
39 phy-names = "usb2-phy0", "usb2-phy1";
Dmeson-g12b-s922x-khadas-vim3.dts1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
8 /dts-v1/;
10 #include "meson-g12b-s922x.dtsi"
11 #include "meson-khadas-vim3.dtsi"
12 #include "meson-g12b-khadas-vim3.dtsi"
19 * The VIM3 on-board MCU can mux the PCIe/USB3.0 shared differential
39 phy-names = "usb2-phy0", "usb2-phy1";
Dmeson-sm1-khadas-vim3l.dts1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
7 /dts-v1/;
9 #include "meson-sm1.dtsi"
10 #include "meson-khadas-vim3.dtsi"
11 #include <dt-bindings/sound/meson-g12a-tohdmitx.h>
17 vddcpu: regulator-vddcpu {
21 compatible = "pwm-regulator";
23 regulator-name = "VDDCPU";
24 regulator-min-microvolt = <690000>;
25 regulator-max-microvolt = <1050000>;
[all …]
Dmeson-gxm.dtsi1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
7 #include "meson-gxl.dtsi"
10 compatible = "amlogic,meson-gxm";
13 cpu-map {
47 compatible = "arm,cortex-a53";
49 enable-method = "psci";
50 next-level-cache = <&l2>;
52 #cooling-cells = <2>;
57 compatible = "arm,cortex-a53";
59 enable-method = "psci";
[all …]
/Linux-v5.10/drivers/usb/dwc3/
Ddwc3-meson-g12a.c1 // SPDX-License-Identifier: GPL-2.0
11 * - Control registers for each USB2 Ports
12 * - Control registers for the USB PHY layer
13 * - SuperSpeed PHY can be enabled only if port is used
14 * - Dynamic OTG switching with ID change interrupt
33 /* USB2 Ports Control Registers, offsets are per-port */
120 "usb2-phy0", "usb2-phy1", "usb2-phy2",
124 "usb2-phy0", "usb2-phy1", "usb3-phy0",
133 * correctly when only the "usb2-phy1" phy is specified on-par with the
137 "usb2-phy0", "usb2-phy1"
[all …]
/Linux-v5.10/arch/arm/boot/dts/
Darmada-375-db.dts1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
4 * (DB-88F6720)
8 * Gregory CLEMENT <gregory.clement@free-electrons.com>
9 * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
12 /dts-v1/;
13 #include <dt-bindings/gpio/gpio.h>
14 #include "armada-375.dtsi"
18 compatible = "marvell,a375-db", "marvell,armada375";
21 stdout-path = "serial0:115200n8";
57 pinctrl-0 = <&spi0_pins>;
[all …]
Dstm32h743i-eval.dts2 * Copyright 2017 - Alexandre Torgue <alexandre.torgue@st.com>
4 * This file is dual-licensed: you can use it either under the terms
43 /dts-v1/;
45 #include "stm32h743-pinctrl.dtsi"
48 model = "STMicroelectronics STM32H743i-EVAL board";
49 compatible = "st,stm32h743i-eval", "st,stm32h743";
53 stdout-path = "serial0:115200n8";
65 vdda: regulator-vdda {
66 compatible = "regulator-fixed";
67 regulator-name = "vdda";
[all …]
Dat91-sama5d4_ma5d4evk.dts1 // SPDX-License-Identifier: GPL-2.0-or-later
6 /dts-v1/;
7 #include "at91-sama5d4_ma5d4.dtsi"
14 stdout-path = "serial3:115200n8";
19 atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>;
20 pinctrl-names = "default";
21 pinctrl-0 = <&pinctrl_usba_vbus>;
26 num-ports = <3>;
27 atmel,vbus-gpio = <0
34 usb2: ehci@600000 { label
[all …]
Dstm32mp157c-ev1.dts1 // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
3 * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
6 /dts-v1/;
8 #include "stm32mp157c-ed1.dts"
9 #include <dt-bindings/gpio/gpio.h>
10 #include <dt-bindings/input/input.h>
14 compatible = "st,stm32mp157c-ev1", "st,stm32mp157c-ed1", "st,stm32mp157";
17 stdout-path = "serial0:115200n8";
27 clk_ext_camera: clk-ext-camera {
28 #clock-cells = <0>;
[all …]
Dstm32mp15xx-dhcor-avenger96.dtsi1 // SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
3 * Copyright (C) Linaro Ltd 2019 - All Rights Reserved
9 #include "stm32mp15xx-dhcor-io1v8.dtsi"
22 cec_clock: clk-cec-fixed {
23 #clock-cells = <0>;
24 compatible = "fixed-clock";
25 clock-frequency = <24000000>;
29 stdout-path = "serial0:115200n8";
32 hdmi-out {
33 compatible = "hdmi-connector";
[all …]
Dat91-sama5d4_xplained.dts1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
3 * at91-sama5d4_xplained.dts - Device Tree file for SAMA5D4 Xplained board
8 /dts-v1/;
13 compatible = "atmel,sama5d4-xplained", "atmel,sama5d4", "atmel,sama5";
16 stdout-path = "serial0:115200n8";
25 clock-frequency = <32768>;
29 clock-frequency = <12000000>;
36 atmel,use-dma-rx;
37 atmel,use-dma-tx;
42 cs-gpios = <&pioC 3 0>, <0>, <0>, <0>;
[all …]
/Linux-v5.10/Documentation/devicetree/bindings/phy/
Drockchip-usb-phy.txt1 ROCKCHIP USB2 PHY
4 - compatible: matching the soc type, one of
5 "rockchip,rk3066a-usb-phy"
6 "rockchip,rk3188-usb-phy"
7 "rockchip,rk3288-usb-phy"
8 - #address-cells: should be 1
9 - #size-cells: should be 0
12 - rockchip,grf : phandle to the syscon managing the "general
13 register files" - phy should be a child of the GRF instead
15 Sub-nodes:
[all …]
Drcar-gen2-phy.txt1 * Renesas R-Car generation 2 USB PHY
3 This file provides information on what the device node for the R-Car generation
7 - compatible: "renesas,usb-phy-r8a7742" if the device is a part of R8A7742 SoC.
8 "renesas,usb-phy-r8a7743" if the device is a part of R8A7743 SoC.
9 "renesas,usb-phy-r8a7744" if the device is a part of R8A7744 SoC.
10 "renesas,usb-phy-r8a7745" if the device is a part of R8A7745 SoC.
11 "renesas,usb-phy-r8a77470" if the device is a part of R8A77470 SoC.
12 "renesas,usb-phy-r8a7790" if the device is a part of R8A7790 SoC.
13 "renesas,usb-phy-r8a7791" if the device is a part of R8A7791 SoC.
14 "renesas,usb-phy-r8a7794" if the device is a part of R8A7794 SoC.
[all …]
/Linux-v5.10/arch/powerpc/boot/dts/
Dasp834x-redboot.dts1 // SPDX-License-Identifier: GPL-2.0-or-later
8 /dts-v1/;
12 compatible = "analogue-and-micro,asp8347e";
13 #address-cells = <1>;
14 #size-cells = <1>;
24 #address-cells = <1>;
25 #size-cells = <0>;
30 d-cache-line-size = <32>;
31 i-cache-line-size = <32>;
32 d-cache-size = <32768>;
[all …]
Dmpc834x_mds.dts1 // SPDX-License-Identifier: GPL-2.0-or-later
8 /dts-v1/;
13 #address-cells = <1>;
14 #size-cells = <1>;
26 #address-cells = <1>;
27 #size-cells = <0>;
32 d-cache-line-size = <32>;
33 i-cache-line-size = <32>;
34 d-cache-size = <32768>;
35 i-cache-size = <32768>;
[all …]
Dmpc5125twr.dts1 // SPDX-License-Identifier: GPL-2.0-or-later
7 * Reworked by Matteo Facchinetti (engineering@sirius-es.it)
11 #include <dt-bindings/clock/mpc512x-clock.h>
13 /dts-v1/;
18 #address-cells = <1>;
19 #size-cells = <1>;
20 interrupt-parent = <&ipic>;
29 #address-cells = <1>;
30 #size-cells = <0>;
35 d-cache-line-size = <0x20>; // 32 bytes
[all …]
/Linux-v5.10/arch/arm64/boot/dts/marvell/
Darmada-3720-db.dts1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
4 * (DB-88F3720-DDR3)
7 * Gregory CLEMENT <gregory.clement@free-electrons.com>
14 /dts-v1/;
16 #include <dt-bindings/gpio/gpio.h>
17 #include "armada-372x.dtsi"
20 model = "Marvell Armada 3720 Development Board DB-88F3720-DDR3";
21 compatible = "marvell,armada-3720-db", "marvell,armada3720", "marvell,armada3710";
24 stdout-path = "serial0:115200n8";
32 exp_usb3_vbus: usb3-vbus {
[all …]
/Linux-v5.10/arch/arm64/boot/dts/ti/
Dk3-j7200-common-proc-board.dts1 // SPDX-License-Identifier: GPL-2.0
3 * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/
6 /dts-v1/;
8 #include "k3-j7200-som-p0.dtsi"
9 #include <dt-bindings/net/ti-dp83867.h>
10 #include <dt-bindings/mux/ti-serdes.h>
14 stdout-path = "serial2:115200n8";
20 mcu_cpsw_pins_default: mcu-cpsw-pins-default {
21 pinctrl-single,pins = <
37 mcu_mdio_pins_default: mcu-mdio1-pins-default {
[all …]
/Linux-v5.10/drivers/phy/allwinner/
Dphy-sun4i-usb.c1 // SPDX-License-Identifier: GPL-2.0-or-later
5 * Copyright (C) 2014-2015 Hans de Goede <hdegoede@redhat.com>
18 #include <linux/extcon-provider.h>
30 #include <linux/phy/phy-sun4i-usb.h>
82 /* A83T specific control bits for PHY0 */
140 /* phy0 / otg related variables */
157 container_of((phy), struct sun4i_usb_phy_data, phys[(phy)->index])
165 iscr = readl(data->base + REG_ISCR); in sun4i_usb_phy0_update_iscr()
168 writel(iscr, data->base + REG_ISCR); in sun4i_usb_phy0_update_iscr()
195 u32 temp, usbc_bit = BIT(phy->index * 2); in sun4i_usb_phy_write()
[all …]

12