| /Linux-v5.10/drivers/staging/octeon/ |
| D | ethernet-spi.c | 23 pr_err("SPI%d: SRX Spi4 interface down\n", index); in cvm_oct_spxx_int_pr()
25 pr_err("SPI%d: SRX Spi4 Calendar table parity error\n", index); in cvm_oct_spxx_int_pr()
27 pr_err("SPI%d: SRX Consecutive Spi4 DIP4 errors have exceeded SPX_ERR_CTL[ERRCNT]\n", in cvm_oct_spxx_int_pr()
30 pr_err("SPI%d: SRX Spi4 DIP4 error\n", index); in cvm_oct_spxx_int_pr()
35 pr_err("SPI%d: SRX Spi4 reserved control word detected\n", in cvm_oct_spxx_int_pr()
38 pr_err("SPI%d: SRX Spi4 receive FIFO drowning/overflow\n", in cvm_oct_spxx_int_pr()
41 pr_err("SPI%d: SRX Spi4 packet closed on non-16B alignment without EOP\n", in cvm_oct_spxx_int_pr()
44 pr_err("SPI%d: SRX Spi4 async FIFO overflow\n", index); in cvm_oct_spxx_int_pr()
66 pr_err("SPI%d: STX DIP2 error on the Spi4 Status channel\n", in cvm_oct_stxx_int_pr()
69 pr_err("SPI%d: STX Spi4 FIFO overflow error\n", index); in cvm_oct_stxx_int_pr()
|
| /Linux-v5.10/arch/mips/include/asm/octeon/ |
| D | cvmx-spi.h | 46 /** Callbacks structure to customize SPI4 initialization sequence */
48 /** Called to reset SPI4 DLL */
155 * Get current SPI4 initialization callbacks
164 * Set new SPI4 initialization callbacks
171 * Callback to perform SPI4 reset
|
| D | cvmx-wqe.h | 350 * - 11 = RGMII RX error/SPI4 DIP4 Error: the RGMII
352 * (RXERR) or the SPI4 packet had one or more
354 * - 12 = RGMII skip error/SPI4 Abort Error: the RGMII
356 * skipped bytes or the SPI4 packet was
358 * - 13 = RGMII nibble error/SPI4 Port NXA Error: the
360 * repeated - 10/100M only) or the SPI4 packet
362 * - 16 = FCS error: a SPI4.2 packet had an FCS error.
|
| /Linux-v5.10/drivers/pinctrl/tegra/ |
| D | pinctrl-tegra114.c | 1519 FUNCTION(spi4),
1632 …PINGROUP(sdmmc1_cmd_pz1, SDMMC1, SPDIF, SPI4, UARTA, 0x304c, N, N…
1633 …PINGROUP(sdmmc1_dat3_py4, SDMMC1, SPDIF, SPI4, UARTA, 0x3050, N, N…
1634 …PINGROUP(sdmmc1_dat2_py5, SDMMC1, PWM0, SPI4, UARTA, 0x3054, N, N…
1635 …PINGROUP(sdmmc1_dat1_py6, SDMMC1, PWM1, SPI4, UARTA, 0x3058, N, N…
1636 …PINGROUP(sdmmc1_dat0_py7, SDMMC1, RSVD2, SPI4, UARTA, 0x305c, N, N…
1642 …PINGROUP(uart2_rxd_pc3, IRDA, SPDIF, UARTA, SPI4, 0x3164, N, N…
1643 …PINGROUP(uart2_txd_pc2, IRDA, SPDIF, UARTA, SPI4, 0x3168, N, N…
1644 …PINGROUP(uart2_rts_n_pj6, UARTA, UARTB, RSVD3, SPI4, 0x316c, N, N…
1645 …PINGROUP(uart2_cts_n_pj5, UARTA, UARTB, RSVD3, SPI4, 0x3170, N, N…
[all …]
|
| D | pinctrl-tegra124.c | 1683 FUNCTION(spi4),
1825 …PINGROUP(sdmmc1_cmd_pz1, SDMMC1, SPDIF, SPI4, UARTA, 0x304c, N, N…
1826 …PINGROUP(sdmmc1_dat3_py4, SDMMC1, SPDIF, SPI4, UARTA, 0x3050, N, N…
1827 …PINGROUP(sdmmc1_dat2_py5, SDMMC1, PWM0, SPI4, UARTA, 0x3054, N, N…
1828 …PINGROUP(sdmmc1_dat1_py6, SDMMC1, PWM1, SPI4, UARTA, 0x3058, N, N…
1829 …PINGROUP(sdmmc1_dat0_py7, SDMMC1, RSVD2, SPI4, UARTA, 0x305c, N, N…
1835 …PINGROUP(uart2_rxd_pc3, IRDA, SPDIF, UARTA, SPI4, 0x3164, N, N…
1836 …PINGROUP(uart2_txd_pc2, IRDA, SPDIF, UARTA, SPI4, 0x3168, N, N…
1837 …PINGROUP(uart2_rts_n_pj6, UARTA, UARTB, GMI, SPI4, 0x316c, N, N…
1838 …PINGROUP(uart2_cts_n_pj5, UARTA, UARTB, GMI, SPI4, 0x3170, N, N…
[all …]
|
| D | pinctrl-tegra30.c | 2078 FUNCTION(spi4),
2182 …PINGROUP(gmi_a17_pb0, UARTD, SPI4, GMI, DTV, 0x3234, N, …
2183 …PINGROUP(gmi_a18_pb1, UARTD, SPI4, GMI, DTV, 0x3238, N, …
2192 …PINGROUP(uart2_txd_pc2, UARTB, SPDIF, UARTA, SPI4, 0x3168, N, …
2193 …PINGROUP(uart2_rxd_pc3, UARTB, SPDIF, UARTA, SPI4, 0x3164, N, …
2198 …PINGROUP(sdmmc3_dat5_pd0, PWM0, SPI4, SDMMC3, SPI2, 0x33ac, N, …
2199 …PINGROUP(sdmmc3_dat4_pd1, PWM1, SPI4, SDMMC3, SPI2, 0x33a8, N, …
2201 …PINGROUP(sdmmc3_dat6_pd3, SPDIF, SPI4, SDMMC3, SPI2, 0x33b0, N, …
2202 …PINGROUP(sdmmc3_dat7_pd4, SPDIF, SPI4, SDMMC3, SPI2, 0x33b4, N, …
2251 …PINGROUP(uart2_cts_n_pj5, UARTA, UARTB, GMI, SPI4, 0x3170, N, …
[all …]
|
| D | pinctrl-tegra20.c | 1951 FUNCTION(spi4),
2071 MUX_PG(gmc, UARTD, SPI4, GMI, SFLASH, 0x14, 29, 0x84, 2, 0xb0, 24),
2079 MUX_PG(irrx, UARTA, UARTB, GMI, SPI4, 0x14, 20, 0x88, 18, 0xa8, 22),
2080 MUX_PG(irtx, UARTA, UARTB, GMI, SPI4, 0x14, 19, 0x88, 16, 0xa8, 20),
2135 MUX_PG(slxa, PCIE, SPI4, SDIO3, SPI2, 0x18, 3, 0x84, 6, 0xa4, 22),
2136 MUX_PG(slxc, SPDIF, SPI4, SDIO3, SPI2, 0x18, 5, 0x84, 10, 0xa4, 26),
2137 MUX_PG(slxd, SPDIF, SPI4, SDIO3, SPI2, 0x18, 6, 0x84, 12, 0xa4, 28),
2138 MUX_PG(slxk, PCIE, SPI4, SDIO3, SPI2, 0x18, 7, 0x84, 14, 0xa4, 30),
2152 MUX_PG(uad, IRDA, SPDIF, UARTA, SPI4, 0x18, 21, 0x80, 6, 0xac, 6),
|
| /Linux-v5.10/arch/arm64/boot/dts/toshiba/ |
| D | tmpv7708_pins.dtsi | 20 spi4_pins: spi4-pins {
21 function = "spi4";
|
| /Linux-v5.10/arch/mips/cavium-octeon/executive/ |
| D | cvmx-spi.c | 70 * Get current SPI4 initialization callbacks
82 * Set new SPI4 initialization callbacks
113 /* Callback to perform SPI4 reset */ in cvmx_spi_start_interface()
123 /* Callback to perform SPI4 link training */ in cvmx_spi_start_interface()
159 /* Callback to perform SPI4 reset */ in cvmx_spi_restart_interface()
168 /* Callback to perform SPI4 link training */ in cvmx_spi_restart_interface()
183 * Callback to perform SPI4 reset
274 /* Waiting for Inf0 Spi4 RX DLL to lock */ in cvmx_spi_reset_cb()
|
| D | cvmx-helper-board.c | 73 /* Interface 0 is SPI4, interface 1 is RGMII */ in cvmx_helper_board_get_mii_address()
103 /* Board has dual SPI4 and no PHYs */ in cvmx_helper_board_get_mii_address()
|
| /Linux-v5.10/arch/powerpc/boot/dts/ |
| D | ac14xx.dts | 20 spi4 = &spi4;
305 spi4: psc@11400 { label
|
| /Linux-v5.10/drivers/pinctrl/visconti/ |
| D | pinctrl-tmpv7700.c | 137 VISCONTI_PINS(spi4, 12, 13, 14);
186 VISCONTI_PIN_GROUP(spi4, REG_PINMUX3, GENMASK(27, 16), 0x01110000),
228 VISCONTI_GROUPS(spi4, "spi4_grp", "spi4_cs_grp");
260 VISCONTI_PIN_FUNCTION(spi4),
|
| /Linux-v5.10/Documentation/devicetree/bindings/security/tpm/ |
| D | tpm_tis_spi.txt | 12 Example (for ARM-based BeagleBoard xM with TPM_TIS on SPI4):
|
| D | st33zp24-spi.txt | 16 Example (for ARM-based BeagleBoard xM with ST33ZP24 on SPI4):
|
| /Linux-v5.10/Documentation/devicetree/bindings/net/nfc/ |
| D | st-nci-spi.txt | 17 Example (for ARM-based BeagleBoard xM with ST21NFCB on SPI4):
|
| /Linux-v5.10/Documentation/devicetree/bindings/pinctrl/ |
| D | brcm,cygnus-pinmux.txt | 83 "spi4": "spi4_0_grp", "spi4_1_grp"
|
| D | toshiba,visconti-pinctrl.yaml | 43 spi0, spi1, spi2, spi3, spi4, spi5, spi6,
|
| /Linux-v5.10/arch/arm/boot/dts/ |
| D | stm32mp157a-stinger96.dtsi | 20 spi0 = &spi4;
281 &spi4 {
|
| D | r7s72100.dtsi | 27 spi4 = &spi4;
278 spi4: spi@e800e800 { label
488 clock-output-names = "spi0", "spi1", "spi2", "spi3", "spi4";
|
| D | qcom-ipq8064-v1.0.dtsi | 30 spi4: spi@1a280000 { label
|
| /Linux-v5.10/arch/arm64/boot/dts/mediatek/ |
| D | mt8183-evb.dts | 328 spi_pins_4: spi4{
377 &spi4 {
|
| /Linux-v5.10/Documentation/devicetree/bindings/dma/ |
| D | qcom_adm.txt | 50 spi4: spi@1a280000 {
|
| /Linux-v5.10/arch/arm64/boot/dts/marvell/ |
| D | armada-80x0.dtsi | 15 spi4 = &cp1_spi1;
|
| /Linux-v5.10/arch/arm64/boot/dts/qcom/ |
| D | msm8916-pins.dtsi | 116 spi4_default: spi4-default {
133 spi4_sleep: spi4-sleep {
|
| /Linux-v5.10/arch/arm64/boot/dts/rockchip/ |
| D | rk3399-rock960.dts | 123 &spi4 {
|
