| /Linux-v6.6/Documentation/devicetree/bindings/net/ |
| D | qcom-emac.txt | 44 "mdio_clk", "tx_clk", "rx_clk", "sys_clk";
93 "mdio_clk", "tx_clk", "rx_clk", "sys_clk";
|
| D | cdns,macb.yaml | 83 - enum: [ rx_clk, tsu_clk ]
210 clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
|
| D | qca,ar803x.yaml | 47 cable is disconnected. And the RX_CLK always keeps outputting a
|
| D | motorcomm,yt8xxx.yaml | 57 drive strength of rx_clk rgmii pad.
|
| /Linux-v6.6/drivers/dma/xilinx/ |
| D | xilinx_dma.c | 478 struct clk **rx_clk, struct clk **rxs_clk);
496 * @rx_clk: DMA s2mm clock
515 struct clk *rx_clk; member
2616 struct clk **tx_clk, struct clk **rx_clk, in axidma_clk_init() argument
2631 *rx_clk = devm_clk_get(&pdev->dev, "m_axi_s2mm_aclk"); in axidma_clk_init()
2632 if (IS_ERR(*rx_clk)) in axidma_clk_init()
2633 *rx_clk = NULL; in axidma_clk_init()
2651 err = clk_prepare_enable(*rx_clk); in axidma_clk_init()
2653 dev_err(&pdev->dev, "failed to enable rx_clk (%d)\n", err); in axidma_clk_init()
2666 clk_disable_unprepare(*rx_clk); in axidma_clk_init()
[all …]
|
| /Linux-v6.6/drivers/net/ethernet/stmicro/stmmac/ |
| D | dwmac-meson8b.c | 61 * cleared on both, the falling and rising edge of the RX_CLK. This selects the
73 /* Defined for adding a delay to the input RX_CLK for better timing.
76 * adjust the window between RX_CLK and RX_DATA and improve the stability
|
| /Linux-v6.6/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/ |
| D | pincfg.txt | 52 0 0 2 0 1 0 /* RX_CLK */
|
| /Linux-v6.6/drivers/net/ethernet/cadence/ |
| D | macb_main.c | 3953 struct clk *rx_clk, struct clk *tsu_clk) in macb_clks_disable() argument
3957 { .clk = rx_clk, }, in macb_clks_disable()
3968 struct clk **rx_clk, struct clk **tsu_clk) in macb_clk_init() argument
3996 *rx_clk = devm_clk_get_optional(&pdev->dev, "rx_clk"); in macb_clk_init()
3997 if (IS_ERR(*rx_clk)) in macb_clk_init()
3998 return PTR_ERR(*rx_clk); in macb_clk_init()
4022 err = clk_prepare_enable(*rx_clk); in macb_clk_init()
4024 dev_err(&pdev->dev, "failed to enable rx_clk (%d)\n", err); in macb_clk_init()
4037 clk_disable_unprepare(*rx_clk); in macb_clk_init()
4546 struct clk **rx_clk, struct clk **tsu_clk) in at91ether_clk_init() argument
[all …]
|
| D | macb.h | 1191 struct clk **rx_clk, struct clk **tsu_clk);
1270 struct clk *rx_clk; member
|
| /Linux-v6.6/arch/powerpc/boot/dts/fsl/ |
| D | mpc8568mds.dts | 148 0x4 0x11 0x2 0x0 0x2 0x0 /* RX_CLK */
176 0x5 0x11 0x2 0x0 0x2 0x0 /* RX_CLK */
|
| /Linux-v6.6/arch/powerpc/boot/dts/ |
| D | mpc832x_rdb.dts | 179 3 21 2 0 1 0 /* RX_CLK (CLK16) */
199 0 13 2 0 1 0 /* RX_CLK (CLK9) */
|
| D | kmeter1.dts | 163 0 0 2 0 1 0 /* RX_CLK */
189 0 31 2 0 1 0 /* RX_CLK */
|
| /Linux-v6.6/arch/arm64/boot/dts/xilinx/ |
| D | zynqmp.dtsi | 586 clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
602 clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
618 clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
634 clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
|
| /Linux-v6.6/drivers/net/dsa/sja1105/ |
| D | sja1105_clocking.c | 444 pad_mii_rx.clk_os = 2; /* RX_CLK/RXC output stage: */ in sja1105_cfg_pad_rx_config()
446 pad_mii_rx.clk_ih = 0; /* RX_CLK/RXC input hysteresis: */ in sja1105_cfg_pad_rx_config()
448 pad_mii_rx.clk_ipud = 2; /* RX_CLK/RXC input pull-up/down: */ in sja1105_cfg_pad_rx_config()
|
| /Linux-v6.6/drivers/net/phy/ |
| D | micrel.c | 893 /* keep rx as "No delay adjustment" and set rx_clk to +0.60ns to get delays of
899 /* set rx to +0.30ns and rx_clk to -0.90ns to compensate the
991 u16 rx, tx, rx_clk, tx_clk; in ksz9031_config_rgmii_delay() local
999 rx_clk = RX_CLK_ND; in ksz9031_config_rgmii_delay()
1005 rx_clk = RX_CLK_ID; in ksz9031_config_rgmii_delay()
1011 rx_clk = RX_CLK_ID; in ksz9031_config_rgmii_delay()
1017 rx_clk = RX_CLK_ND; in ksz9031_config_rgmii_delay()
1047 FIELD_PREP(MII_KSZ9031RN_RX_CLK, rx_clk)); in ksz9031_config_rgmii_delay()
|
| D | icplus.c | 35 #define IP1001_RXPHASE_SEL BIT(0) /* Add delay on RX_CLK */
|
| /Linux-v6.6/drivers/net/ethernet/qualcomm/emac/ |
| D | emac.c | 69 "rx_clk", "sys_clk"
|
| /Linux-v6.6/drivers/pinctrl/renesas/ |
| D | pfc-r8a7740.c | 1917 /* RXD[0:3], RX_CLK, RX_DV, RX_ER
1933 /* RXD[0:7], RX_CLK, RX_DV, RX_ER
|
| /Linux-v6.6/drivers/net/phy/mscc/ |
| D | mscc_main.c | 539 /* For traffic to pass, the VSC8502 family needs the RX_CLK disable bit in vsc85xx_update_rgmii_cntl()
|
