Home
last modified time | relevance | path

Searched +full:regulator +full:- +full:max +full:- +full:microamp (Results 1 – 25 of 99) sorted by relevance

1234

/Linux-v5.15/arch/riscv/boot/dts/sifive/
Dhifive-unmatched-a00.dts1 // SPDX-License-Identifier: (GPL-2.0 OR MIT)
4 #include "fu740-c000.dtsi"
5 #include <dt-bindings/interrupt-controller/irq.h>
11 #address-cells = <2>;
12 #size-cells = <2>;
14 compatible = "sifive,hifive-unmatched-a00", "sifive,fu740-c000",
18 stdout-path = "serial0";
22 timebase-frequency = <RTCCLK_FREQ>;
34 #clock-cells = <0>;
35 compatible = "fixed-clock";
[all …]
/Linux-v5.15/Documentation/devicetree/bindings/regulator/
Dda9211.txt2 Voltage Regulator
5 - compatible: "dlg,da9211" or "dlg,da9212" or "dlg,da9213" or "dlg,da9223"
7 - reg: I2C slave address, usually 0x68.
8 - interrupts: the interrupt outputs of the controller
9 - regulators: A node that houses a sub-node for each regulator within the
10 device. Each sub-node is identified using the node's name, with valid
11 values listed below. The content of each sub-node is defined by the
12 standard binding for regulators; see regulator.txt.
16 - enable-gpios: platform gpio for control of BUCKA/BUCKB.
17 - Any optional property defined in regulator.txt
[all …]
Dpv88090.txt1 * Powerventure Semiconductor PV88090 Voltage Regulator
4 - compatible: "pvs,pv88090".
5 - reg: I2C slave address, usually 0x48.
6 - interrupts: the interrupt outputs of the controller
7 - regulators: A node that houses a sub-node for each regulator within the
8 device. Each sub-node is identified using the node's name, with valid
9 values listed below. The content of each sub-node is defined by the
10 standard binding for regulators; see regulator.txt.
14 - Any optional property defined in regulator.txt
21 interrupt-parent = <&gpio>;
[all …]
Dpv88080.txt1 * Powerventure Semiconductor PV88080 Voltage Regulator
4 - compatible: Must be one of the following, depending on the
6 - "pvs,pv88080" (DEPRECATED)
8 - "pvs,pv88080-aa" for PV88080 AA or AB silicon
9 - "pvs,pv88080-ba" for PV88080 BA or BB silicon
11 - reg: I2C slave address, usually 0x49
12 - interrupts: the interrupt outputs of the controller
13 - regulators: A node that houses a sub-node for each regulator within the
14 device. Each sub-node is identified using the node's name, with valid
15 values listed below. The content of each sub-node is defined by the
[all …]
Ddlg,da9121.yaml1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/regulator/dlg,da9121.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Dialog Semiconductor DA9121 voltage regulator
10 - Adam Ward <Adam.Ward.opensource@diasemi.com>
13 Dialog Semiconductor DA9121 Single-channel 10A double-phase buck converter
14 Dialog Semiconductor DA9122 Double-channel 5A single-phase buck converter
15 Dialog Semiconductor DA9220 Double-channel 3A single-phase buck converter
16 Dialog Semiconductor DA9217 Single-channel 6A double-phase buck converter
[all …]
Dtps65218.txt4 - compatible: "ti,tps65218"
5 - reg: I2C slave address
7 - List of regulators provided by this controller, must be named
8 after their hardware counterparts: dcdc[1-6] and ldo1
9 - This is the list of child nodes that specify the regulator
12 using the standard binding for regulators found at ./regulator.txt.
15 tps65217: regulator-dcdc1, regulator-dcdc2, regulator-dcdc3, regulator-dcdc4,
16 regulator-dcdc5, regulator-dcdc6, regulator-ldo1, regulator-ls3.
17 Each regulator is defined using the standard binding for regulators.
24 interrupt-controller;
[all …]
Dlp872x.txt4 - compatible: "ti,lp8720" or "ti,lp8725"
5 - reg: I2C slave address. 0x7d = LP8720, 0x7a = LP8725
8 - ti,general-config: the value of LP872X_GENERAL_CFG register (u8)
27 - ti,update-config: define it when LP872X_GENERAL_CFG register should be set
28 - ti,dvs-gpio: GPIO specifier for external DVS pin control of LP872x devices.
29 - ti,dvs-vsel: DVS selector. 0 = SEL_V1, 1 = SEL_V2.
30 - ti,dvs-state: initial DVS pin state. 0 = DVS_LOW, 1 = DVS_HIGH.
31 - enable-gpios: GPIO specifier for EN pin control of LP872x devices.
37 (Documentation/devicetree/bindings/regulator/regulator.txt)
40 - LP8720: https://www.ti.com/lit/ds/symlink/lp8720.pdf
[all …]
Dregulator.yaml1 # SPDX-License-Identifier: GPL-2.0
3 ---
4 $id: http://devicetree.org/schemas/regulator/regulator.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Liam Girdwood <lgirdwood@gmail.com>
11 - Mark Brown <broonie@kernel.org>
14 regulator-name:
15 description: A string used as a descriptive name for regulator outputs
18 regulator-min-microvolt:
21 regulator-max-microvolt:
[all …]
/Linux-v5.15/Documentation/devicetree/bindings/mfd/
Dlp873x.txt4 - compatible: "ti,lp8732", "ti,lp8733"
5 - reg: I2C slave address.
6 - gpio-controller: Marks the device node as a GPIO Controller.
7 - #gpio-cells: Should be two. The first cell is the pin number and
10 - xxx-in-supply: Phandle to parent supply node of each regulator
13 - regulators: List of child nodes that specify the regulator
20 gpio-controller;
21 #gpio-cells = <2>;
23 buck0-in-supply = <&vsys_3v3>;
24 buck1-in-supply = <&vsys_3v3>;
[all …]
Dmax77693.txt1 Maxim MAX77693 multi-function device
4 - PMIC,
5 - CHARGER,
6 - LED,
7 - MUIC,
8 - HAPTIC
14 - compatible : Must be "maxim,max77693".
15 - reg : Specifies the i2c slave address of PMIC block.
16 - interrupts : This i2c device has an IRQ line connected to the main SoC.
19 - regulators : The regulators of max77693 have to be instantiated under subnode
[all …]
Dmax14577.txt1 Maxim MAX14577/77836 Multi-Function Device
3 MAX14577 is a Multi-Function Device with Micro-USB Interface Circuit, Li+
13 - compatible : Must be "maxim,max14577" or "maxim,max77836".
14 - reg : I2C slave address for the max14577 chip (0x25 for max14577/max77836)
15 - interrupts : IRQ line for the chip.
19 - charger :
22 - compatible : "maxim,max14577-charger"
23 or "maxim,max77836-charger"
24 - maxim,fast-charge-uamp : Current in uA for Fast Charge;
26 - for max14577: 90000 - 950000;
[all …]
/Linux-v5.15/Documentation/devicetree/bindings/power/supply/
Dsummit,smb347-charger.yaml1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: "http://devicetree.org/schemas/power/supply/summit,smb347-charger.yaml#"
5 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
10 - David Heidelberg <david@ixit.cz>
11 - Dmitry Osipenko <digetx@gmail.com>
16 - summit,smb345
17 - summit,smb347
18 - summit,smb358
26 monitored-battery:
[all …]
/Linux-v5.15/arch/arm64/boot/dts/freescale/
Dimx8mm-venice-gw700x.dtsi1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
6 #include <dt-bindings/gpio/gpio.h>
7 #include <dt-bindings/input/linux-event-codes.h>
8 #include <dt-bindings/net/ti-dp83867.h>
16 gpio-keys {
17 compatible = "gpio-keys";
19 user-pb {
25 user-pb1x {
28 interrupt-parent = <&gsc>;
32 key-erased {
[all …]
/Linux-v5.15/arch/arm64/boot/dts/qcom/
Dmsm8998-mtp.dtsi1 // SPDX-License-Identifier: GPL-2.0
16 stdout-path = "serial0:115200n8";
19 vph_pwr: vph-pwr-regulator {
20 compatible = "regulator-fixed";
21 regulator-name = "vph_pwr";
22 regulator-always-on;
23 regulator-boot-on;
31 compatible = "qcom,wcn3990-bt";
33 vddio-supply = <&vreg_s4a_1p8>;
34 vddxo-supply = <&vreg_l7a_1p8>;
[all …]
Dapq8096-ifc6640.dts1 // SPDX-License-Identifier: BSD-3-Clause
3 /dts-v1/;
8 #include <dt-bindings/gpio/gpio.h>
9 #include <dt-bindings/input/input.h>
10 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
14 compatible = "inforce,ifc6640", "qcom,apq8096-sbc", "qcom,apq8096";
16 qcom,msm-id = <291 0x00030001>;
17 qcom,board-id = <0x00010018 0>;
24 stdout-path = "serial0:115200n8";
27 v1p05: v1p05-regulator {
[all …]
Dsm8150-microsoft-surface-duo.dts1 // SPDX-License-Identifier: BSD-3-Clause
6 /dts-v1/;
8 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
9 #include <dt-bindings/gpio/gpio.h>
17 compatible = "microsoft,surface-duo", "qcom,sm8150";
24 stdout-path = "serial0:115200n8";
27 vph_pwr: vph-pwr-regulator {
28 compatible = "regulator-fixed";
29 regulator-name = "vph_pwr";
30 regulator-min-microvolt = <3700000>;
[all …]
Dsm8150-mtp.dts1 // SPDX-License-Identifier: BSD-3-Clause
3 * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
7 /dts-v1/;
9 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
10 #include <dt-bindings/gpio/gpio.h>
18 compatible = "qcom,sm8150-mtp", "qcom,sm8150";
25 stdout-path = "serial0:115200n8";
28 vph_pwr: vph-pwr-regulator {
29 compatible = "regulator-fixed";
30 regulator-name = "vph_pwr";
[all …]
Dsm8150-hdk.dts1 // SPDX-License-Identifier: BSD-3-Clause
6 /dts-v1/;
8 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
9 #include <dt-bindings/gpio/gpio.h>
17 compatible = "qcom,sm8150-hdk", "qcom,sm8150";
24 stdout-path = "serial0:115200n8";
27 vph_pwr: vph-pwr-regulator {
28 compatible = "regulator-fixed";
29 regulator-name = "vph_pwr";
30 regulator-min-microvolt = <3700000>;
[all …]
Dmsm8998-oneplus-common.dtsi1 // SPDX-License-Identifier: BSD-3-Clause
3 * OnePlus 5(T) (cheeseburger / dumpling) common device tree source based on msm8998-mtp.dtsi
9 /dts-v1/;
11 #include <dt-bindings/gpio/gpio.h>
12 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
20 qcom,msm-id = <292 0x20001>; /* 8998 v2.1 */
23 #address-cells = <2>;
24 #size-cells = <2>;
29 compatible = "simple-framebuffer";
38 reserved-memory {
[all …]
Dsa8155p-adp.dts1 // SPDX-License-Identifier: BSD-3-Clause
6 /dts-v1/;
8 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
9 #include <dt-bindings/gpio/gpio.h>
16 compatible = "qcom,sa8155p-adp", "qcom,sa8155p";
23 stdout-path = "serial0:115200n8";
27 compatible = "regulator-fixed";
28 regulator-name = "vreg_3p3";
29 regulator-min-microvolt = <3300000>;
30 regulator-max-microvolt = <3300000>;
[all …]
Dsm8250-hdk.dts1 // SPDX-License-Identifier: BSD-3-Clause
6 /dts-v1/;
8 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
16 compatible = "qcom,sm8250-hdk", "qcom,sm8250";
23 stdout-path = "serial0:115200n8";
26 vph_pwr: vph-pwr-regulator {
27 compatible = "regulator-fixed";
28 regulator-name = "vph_pwr";
29 regulator-min-microvolt = <3700000>;
30 regulator-max-microvolt = <3700000>;
[all …]
Dsm8350-hdk.dts1 // SPDX-License-Identifier: BSD-3-Clause
3 * Copyright (c) 2020-2021, Linaro Limited
6 /dts-v1/;
8 #include <dt-bindings/gpio/gpio.h>
9 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
14 compatible = "qcom,sm8350-hdk", "qcom,sm8350";
21 stdout-path = "serial0:115200n8";
24 vph_pwr: vph-pwr-regulator {
25 compatible = "regulator-fixed";
26 regulator-name = "vph_pwr";
[all …]
Dsm8350-mtp.dts1 // SPDX-License-Identifier: BSD-3-Clause
6 /dts-v1/;
8 #include <dt-bindings/gpio/gpio.h>
9 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
20 compatible = "qcom,sm8350-mtp", "qcom,sm8350";
27 stdout-path = "serial0:115200n8";
30 vph_pwr: vph-pwr-regulator {
31 compatible = "regulator-fixed";
32 regulator-name = "vph_pwr";
33 regulator-min-microvolt = <3700000>;
[all …]
/Linux-v5.15/Documentation/devicetree/bindings/ufs/
Dufshcd-pltfrm.txt3 UFSHC nodes are defined to describe on-chip UFS host controllers.
7 - compatible : must contain "jedec,ufs-1.1" or "jedec,ufs-2.0"
10 SoC-specific compatible along with "qcom,ufshc" and
12 "qcom,msm8994-ufshc", "qcom,ufshc", "jedec,ufs-2.0"
13 "qcom,msm8996-ufshc", "qcom,ufshc", "jedec,ufs-2.0"
14 "qcom,msm8998-ufshc", "qcom,ufshc", "jedec,ufs-2.0"
15 "qcom,sdm845-ufshc", "qcom,ufshc", "jedec,ufs-2.0"
16 "qcom,sm8150-ufshc", "qcom,ufshc", "jedec,ufs-2.0"
17 "qcom,sm8250-ufshc", "qcom,ufshc", "jedec,ufs-2.0"
18 "qcom,sm8350-ufshc", "qcom,ufshc", "jedec,ufs-2.0"
[all …]
/Linux-v5.15/Documentation/devicetree/bindings/leds/
Dleds-ktd2692.txt1 * Kinetic Technologies - KTD2692 Flash LED Driver
3 KTD2692 is the ideal power solution for high-power flash LEDs.
4 It uses ExpressWire single-wire programming for maximum flexibility.
7 enable/disable the IC, Movie(max 1/3 of Flash current) / Flash mode current,
11 LED current will be ramped up to the flash-mode current level.
14 - compatible : Should be "kinetic,ktd2692".
15 - ctrl-gpios : Specifier of the GPIO connected to CTRL pin.
16 - aux-gpios : Specifier of the GPIO connected to AUX pin.
19 - vin-supply : "vin" LED supply (2.7V to 5.5V).
20 See Documentation/devicetree/bindings/regulator/regulator.txt
[all …]

1234